* [PATCH v1] Bluetooth: hci_qca: Add support for controller debug logs.
@ 2018-10-01 13:51 Balakrishna Godavarthi
2018-10-01 19:48 ` Matthias Kaehlcke
0 siblings, 1 reply; 3+ messages in thread
From: Balakrishna Godavarthi @ 2018-10-01 13:51 UTC (permalink / raw)
To: marcel, johan.hedberg
Cc: mka, linux-kernel, linux-bluetooth, hemantg, linux-arm-msm,
Balakrishna Godavarthi, Harish Bandi
This patch will prevent error messages splashing on console.
[ 78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[ 78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[ 78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
[ 78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
QCA wcn3990 will send the debug logs in the form of ACL packets.
While decoding packet in qca_recv(), marking the received debug log
packet as diagnostic packet.
Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
drivers/bluetooth/hci_qca.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d98ed0442201..a00910aaed54 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -63,6 +63,10 @@
/* susclk rate */
#define SUSCLK_RATE_32KHZ 32768
+/* Controller debug log header */
+#define QCA_DEBUG_HDR_MSB 0xDC
+#define QCA_DEBUG_HDR_LSB 0x2E
+
/* HCI_IBS transmit side sleep protocol states */
enum tx_ibs_states {
HCI_IBS_TX_ASLEEP,
@@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
+static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ /* We receive debug logs from chip as an ACL packets.
+ * Instead of sending the data to ACL to decode the
+ * received data, we are pushing them to the above layers
+ * as a diagnostic packet.
+ */
+ if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
+ (skb->data[1] == QCA_DEBUG_HDR_LSB))
+ return hci_recv_diag(hdev, skb);
+ else
+ return hci_recv_frame(hdev, skb);
+}
+
#define QCA_IBS_SLEEP_IND_EVENT \
.type = HCI_IBS_SLEEP_IND, \
.hlen = 0, \
@@ -870,13 +888,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
.lsize = 0, \
.maxlen = HCI_MAX_IBS_SIZE
+#define QCA_RECV_ACL_DATA \
+ .type = HCI_ACLDATA_PKT, \
+ .hlen = HCI_ACL_HDR_SIZE, \
+ .loff = 2, \
+ .lsize = 2, \
+ .maxlen = HCI_MAX_FRAME_SIZE
+
static const struct h4_recv_pkt qca_recv_pkts[] = {
- { H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = hci_recv_frame },
{ QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
{ QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack },
{ QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
+ { QCA_RECV_ACL_DATA, .recv = qca_recv_acl_data },
};
static int qca_recv(struct hci_uart *hu, const void *data, int count)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v1] Bluetooth: hci_qca: Add support for controller debug logs.
2018-10-01 13:51 [PATCH v1] Bluetooth: hci_qca: Add support for controller debug logs Balakrishna Godavarthi
@ 2018-10-01 19:48 ` Matthias Kaehlcke
2018-10-02 7:32 ` Balakrishna Godavarthi
0 siblings, 1 reply; 3+ messages in thread
From: Matthias Kaehlcke @ 2018-10-01 19:48 UTC (permalink / raw)
To: Balakrishna Godavarthi
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth, hemantg,
linux-arm-msm, Harish Bandi
Hi Balakrishna,
On Mon, Oct 01, 2018 at 07:21:02PM +0530, Balakrishna Godavarthi wrote:
> This patch will prevent error messages splashing on console.
>
> [ 78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
> [ 78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
> [ 78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
> [ 78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL packet for unknown connection handle 3804
>
> QCA wcn3990 will send the debug logs in the form of ACL packets.
> While decoding packet in qca_recv(), marking the received debug log
> packet as diagnostic packet.
>
> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> ---
> drivers/bluetooth/hci_qca.c | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index d98ed0442201..a00910aaed54 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -63,6 +63,10 @@
> /* susclk rate */
> #define SUSCLK_RATE_32KHZ 32768
>
> +/* Controller debug log header */
> +#define QCA_DEBUG_HDR_MSB 0xDC
> +#define QCA_DEBUG_HDR_LSB 0x2E
> +
> /* HCI_IBS transmit side sleep protocol states */
> enum tx_ibs_states {
> HCI_IBS_TX_ASLEEP,
> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
> return 0;
> }
>
> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
> +{
> + /* We receive debug logs from chip as an ACL packets.
> + * Instead of sending the data to ACL to decode the
> + * received data, we are pushing them to the above layers
> + * as a diagnostic packet.
> + */
> + if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
> + (skb->data[1] == QCA_DEBUG_HDR_LSB))
> + return hci_recv_diag(hdev, skb);
> + else
> + return hci_recv_frame(hdev, skb);
nit: you could just do hci_recv_frame() after the if branch, instead
of doing it in 'else'. That would make it clearer at first sight that
the QCA debug packets are a special case and other packets normal
operation.
> +}
> +
> #define QCA_IBS_SLEEP_IND_EVENT \
> .type = HCI_IBS_SLEEP_IND, \
> .hlen = 0, \
> @@ -870,13 +888,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
> .lsize = 0, \
> .maxlen = HCI_MAX_IBS_SIZE
>
> +#define QCA_RECV_ACL_DATA \
> + .type = HCI_ACLDATA_PKT, \
> + .hlen = HCI_ACL_HDR_SIZE, \
> + .loff = 2, \
> + .lsize = 2, \
> + .maxlen = HCI_MAX_FRAME_SIZE
Is there any actual advantage of adding this 'macro' instead of just
using H4_RECV_ACL, which is exactly the same?
> static const struct h4_recv_pkt qca_recv_pkts[] = {
> - { H4_RECV_ACL, .recv = hci_recv_frame },
> { H4_RECV_SCO, .recv = hci_recv_frame },
> { H4_RECV_EVENT, .recv = hci_recv_frame },
> { QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
> { QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack },
> { QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
> + { QCA_RECV_ACL_DATA, .recv = qca_recv_acl_data },
> };
>
> static int qca_recv(struct hci_uart *hu, const void *data, int count)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v1] Bluetooth: hci_qca: Add support for controller debug logs.
2018-10-01 19:48 ` Matthias Kaehlcke
@ 2018-10-02 7:32 ` Balakrishna Godavarthi
0 siblings, 0 replies; 3+ messages in thread
From: Balakrishna Godavarthi @ 2018-10-02 7:32 UTC (permalink / raw)
To: Matthias Kaehlcke
Cc: marcel, johan.hedberg, linux-kernel, linux-bluetooth, hemantg,
linux-arm-msm, Harish Bandi
Hi Matthias,
On 2018-10-02 01:18, Matthias Kaehlcke wrote:
> Hi Balakrishna,
>
> On Mon, Oct 01, 2018 at 07:21:02PM +0530, Balakrishna Godavarthi wrote:
>> This patch will prevent error messages splashing on console.
>>
>> [ 78.426697] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL
>> packet for unknown connection handle 3804
>> [ 78.436682] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL
>> packet for unknown connection handle 3804
>> [ 78.446639] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL
>> packet for unknown connection handle 3804
>> [ 78.456596] Bluetooth: hci_core.c:hci_acldata_packet() hci0: ACL
>> packet for unknown connection handle 3804
>>
>> QCA wcn3990 will send the debug logs in the form of ACL packets.
>> While decoding packet in qca_recv(), marking the received debug log
>> packet as diagnostic packet.
>>
>> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>> ---
>> drivers/bluetooth/hci_qca.c | 27 ++++++++++++++++++++++++++-
>> 1 file changed, 26 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index d98ed0442201..a00910aaed54 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -63,6 +63,10 @@
>> /* susclk rate */
>> #define SUSCLK_RATE_32KHZ 32768
>>
>> +/* Controller debug log header */
>> +#define QCA_DEBUG_HDR_MSB 0xDC
>> +#define QCA_DEBUG_HDR_LSB 0x2E
>> +
>> /* HCI_IBS transmit side sleep protocol states */
>> enum tx_ibs_states {
>> HCI_IBS_TX_ASLEEP,
>> @@ -849,6 +853,20 @@ static int qca_ibs_wake_ack(struct hci_dev *hdev,
>> struct sk_buff *skb)
>> return 0;
>> }
>>
>> +static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff
>> *skb)
>> +{
>> + /* We receive debug logs from chip as an ACL packets.
>> + * Instead of sending the data to ACL to decode the
>> + * received data, we are pushing them to the above layers
>> + * as a diagnostic packet.
>> + */
>> + if ((skb->len > 2) && (skb->data[0] == QCA_DEBUG_HDR_MSB) &&
>> + (skb->data[1] == QCA_DEBUG_HDR_LSB))
>> + return hci_recv_diag(hdev, skb);
>> + else
>> + return hci_recv_frame(hdev, skb);
>
> nit: you could just do hci_recv_frame() after the if branch, instead
> of doing it in 'else'. That would make it clearer at first sight that
> the QCA debug packets are a special case and other packets normal
> operation.
>
[Bala]: will update.
>> +}
>> +
>> #define QCA_IBS_SLEEP_IND_EVENT \
>> .type = HCI_IBS_SLEEP_IND, \
>> .hlen = 0, \
>> @@ -870,13 +888,20 @@ static int qca_ibs_wake_ack(struct hci_dev
>> *hdev, struct sk_buff *skb)
>> .lsize = 0, \
>> .maxlen = HCI_MAX_IBS_SIZE
>>
>> +#define QCA_RECV_ACL_DATA \
>> + .type = HCI_ACLDATA_PKT, \
>> + .hlen = HCI_ACL_HDR_SIZE, \
>> + .loff = 2, \
>> + .lsize = 2, \
>> + .maxlen = HCI_MAX_FRAME_SIZE
>
> Is there any actual advantage of adding this 'macro' instead of just
> using H4_RECV_ACL, which is exactly the same?
>
[Bala]: yes we can use same macro, will update.
>> static const struct h4_recv_pkt qca_recv_pkts[] = {
>> - { H4_RECV_ACL, .recv = hci_recv_frame },
>> { H4_RECV_SCO, .recv = hci_recv_frame },
>> { H4_RECV_EVENT, .recv = hci_recv_frame },
>> { QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
>> { QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack },
>> { QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
>> + { QCA_RECV_ACL_DATA, .recv = qca_recv_acl_data },
>> };
>>
>> static int qca_recv(struct hci_uart *hu, const void *data, int count)
--
Regards
Balakrishna.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-10-02 7:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-01 13:51 [PATCH v1] Bluetooth: hci_qca: Add support for controller debug logs Balakrishna Godavarthi
2018-10-01 19:48 ` Matthias Kaehlcke
2018-10-02 7:32 ` Balakrishna Godavarthi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).