[RFT PATCH v2 1/4] ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250

[RFT PATCH v2 1/4] ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos5250

[Krzysztof Kozlowski]

Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address.  Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:

  exynos5250-smdk5250.dtb: soc: usb3: {'compatible': ['samsung,exynos5250-dwusb3'],
    ... } should not be valid under {'type': 'object'}

  exynos5250.dtsi:638.16-653.5: Warning (simple_bus_reg): /soc/usb3: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. Use ranges with values and drop reg from usb-wrapper node.
2. Keep "usb" as wrapper's node name.
---
 arch/arm/boot/dts/exynos5250.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 97e89859ba3d..a5db4ac213d5 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -635,17 +635,17 @@ i2s2: i2s@12d70000 {
 			#sound-dai-cells = <1>;
 		};
 
-		usbdrd: usb3 {
+		usbdrd: usb@12000000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			clocks = <&clock CLK_USB3>;
 			clock-names = "usbdrd30";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12000000 0x10000>;
 
-			usbdrd_dwc3: usb@12000000 {
+			usbdrd_dwc3: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
-- 
2.34.1

[RFT PATCH v2 2/4] ARM: dts: exynos: add unit address to DWC3 node wrapper in Exynos54xx

[Krzysztof Kozlowski]

Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address.  Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:

  exynos5422-odroidhc1.dtb: soc: usb3-0: {'compatible': ['samsung,exynos5250-dwusb3'],
    ... } should not be valid under {'type': 'object'}

  exynos54xx.dtsi:145.21-159.5: Warning (simple_bus_reg): /soc/usb3-0: missing or empty reg/ranges property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. Use ranges with values and drop reg from usb-wrapper node.
2. Keep "usb" as wrapper's node name.
---
 arch/arm/boot/dts/exynos54xx.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 3ec43761d8b9..5c799886c275 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -142,15 +142,15 @@ hsi2c_7: i2c@12cd0000 {
 			status = "disabled";
 		};
 
-		usbdrd3_0: usb3-0 {
+		usbdrd3_0: usb@12000000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12000000 0x10000>;
 
-			usbdrd_dwc3_0: usb@12000000 {
+			usbdrd_dwc3_0: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -164,15 +164,15 @@ usbdrd_phy0: phy@12100000 {
 			#phy-cells = <1>;
 		};
 
-		usbdrd3_1: usb3-1 {
+		usbdrd3_1: usb@12400000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12400000 0x10000>;
 
-			usbdrd_dwc3_1: usb@12400000 {
+			usbdrd_dwc3_1: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
+				reg = <0x0 0x10000>;
 				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,dis_u3_susphy_quirk;
-- 
2.34.1

[RFT PATCH v2 3/4] arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433

[Krzysztof Kozlowski]

Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address.  Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:

  exynos5433-tm2e.dtb: soc@0: usbdrd: {'compatible': ['samsung,exynos5433-dwusb3'], ...
    should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. New patch
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 9da24fe958a3..0fca783979f6 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1742,7 +1742,7 @@ hsi2c_11: i2c@14df0000 {
 			status = "disabled";
 		};
 
-		usbdrd30: usbdrd {
+		usbdrd30: usb@15400000 {
 			compatible = "samsung,exynos5433-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
 				<&cmu_fsys CLK_SCLK_USBDRD30>,
@@ -1751,16 +1751,16 @@ usbdrd30: usbdrd {
 			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15400000 0x10000>;
 			status = "disabled";
 
-			usbdrd_dwc3: usb@15400000 {
+			usbdrd_dwc3: usb@0 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
 					<&cmu_fsys CLK_ACLK_USBDRD30>,
 					<&cmu_fsys CLK_SCLK_USBDRD30>;
 				clock-names = "ref", "bus_early", "suspend";
-				reg = <0x15400000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -1795,7 +1795,7 @@ usbhost30_phy: phy@15580000 {
 			status = "disabled";
 		};
 
-		usbhost30: usbhost {
+		usbhost30: usb@15a00000 {
 			compatible = "samsung,exynos5433-dwusb3";
 			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
 				<&cmu_fsys CLK_SCLK_USBHOST30>,
@@ -1804,16 +1804,16 @@ usbhost30: usbhost {
 			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges <0x0 0x15a00000 0x10000>;
 			status = "disabled";
 
-			usbhost_dwc3: usb@15a00000 {
+			usbhost_dwc3: usb@0 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
 					<&cmu_fsys CLK_ACLK_USBHOST30>,
 					<&cmu_fsys CLK_SCLK_USBHOST30>;
 				clock-names = "ref", "bus_early", "suspend";
-				reg = <0x15a00000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
-- 
2.34.1

[RFT PATCH v2 4/4] arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7

[Krzysztof Kozlowski]

Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address.  Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:

  exynos7-espresso.dtb: soc@0: usb: {'compatible': ['samsung,exynos7-dwusb3'], ...
    should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. New patch
---
 arch/arm64/boot/dts/exynos/exynos7.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 82fee1b7caab..b1fa68835b09 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -690,7 +690,7 @@ usbdrd_phy: phy@15500000 {
 			#phy-cells = <1>;
 		};
 
-		usbdrd: usb {
+		usbdrd: usb@15400000 {
 			compatible = "samsung,exynos7-dwusb3";
 			clocks = <&clock_fsys0 ACLK_USBDRD300>,
 			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
@@ -699,11 +699,11 @@ usbdrd: usb {
 				"usbdrd30_axius_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x15400000 0x10000>;
 
-			usb@15400000 {
+			usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x15400000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
-- 
2.34.1

Re: [RFT PATCH v2 3/4] arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos5433

[Krzysztof Kozlowski]

On 27/01/2023 22:15, Krzysztof Kozlowski wrote:
> Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
> which do not have unit address.  Therefore usethe address space
> of child device (actual DWC3 Controller) as the wrapper's address to
> fix:
> 
>   exynos5433-tm2e.dtb: soc@0: usbdrd: {'compatible': ['samsung,exynos5433-dwusb3'], ...
>     should not be valid under {'type': 'object'}
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Changes since v1:
> 1. New patch
> ---
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 9da24fe958a3..0fca783979f6 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -1742,7 +1742,7 @@ hsi2c_11: i2c@14df0000 {
>  			status = "disabled";
>  		};
>  
> -		usbdrd30: usbdrd {
> +		usbdrd30: usb@15400000 {
>  			compatible = "samsung,exynos5433-dwusb3";
>  			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
>  				<&cmu_fsys CLK_SCLK_USBDRD30>,
> @@ -1751,16 +1751,16 @@ usbdrd30: usbdrd {
>  			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> -			ranges;
> +			ranges = <0x0 0x15400000 0x10000>;
>  			status = "disabled";
>  
> -			usbdrd_dwc3: usb@15400000 {
> +			usbdrd_dwc3: usb@0 {
>  				compatible = "snps,dwc3";
>  				clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
>  					<&cmu_fsys CLK_ACLK_USBDRD30>,
>  					<&cmu_fsys CLK_SCLK_USBDRD30>;
>  				clock-names = "ref", "bus_early", "suspend";
> -				reg = <0x15400000 0x10000>;
> +				reg = <0x0 0x10000>;
>  				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
>  				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
>  				phy-names = "usb2-phy", "usb3-phy";
> @@ -1795,7 +1795,7 @@ usbhost30_phy: phy@15580000 {
>  			status = "disabled";
>  		};
>  
> -		usbhost30: usbhost {
> +		usbhost30: usb@15a00000 {
>  			compatible = "samsung,exynos5433-dwusb3";
>  			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
>  				<&cmu_fsys CLK_SCLK_USBHOST30>,
> @@ -1804,16 +1804,16 @@ usbhost30: usbhost {
>  			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> -			ranges;
> +			ranges <0x0 0x15a00000 0x10000>;

This does not even build...

Best regards,
Krzysztof