* 100% CPU load on nforce2/3 motherboards with kernels >= 2.6.8
@ 2005-01-10 13:20 Artem S. Tashkinov
0 siblings, 0 replies; only message in thread
From: Artem S. Tashkinov @ 2005-01-10 13:20 UTC (permalink / raw)
To: B.Zolnierkiewicz
Good day, Bartlomiej Zolnierkiewicz!
I've got a severe problem with linux >= 2.6.9 kernels on my PC: any
read/write HDD IO operations consume 100% of CPU. Kernel is compiled
with nforce IDE support. Kernel is vanilla from kernel.org. No
proprietary drivers are installed. My chipset is NForce3 250, CPU is
Sempron 3100. My MB is GigaByte K8NS Pro.
My friend (who has an nforce2 based motherboard Asus A7N8X-X) has the
same problem with >= 2.6.9 kernels. 2.6.7 at the same time works fine
for him.
His and mine kernels say that the HDD is in UDMA5 mode. I tried
switching off ACPI/IO APIC and even Plug'n'Play code with no success.
Kernel 2.4.28 works perfectly
With respect, Artem
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-01-10 13:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-01-10 13:20 100% CPU load on nforce2/3 motherboards with kernels >= 2.6.8 Artem S. Tashkinov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).