From: Michael Thonke <iogl64nx@gmail.com>
To: Alexander Fieroch <fieroch@web.de>
Cc: linux-kernel@vger.kernel.org, Jesper Juhl <jesper.juhl@gmail.com>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
bzolnier@gmail.com, axboe@suse.de,
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
Alexey Dobriyan <adobriyan@gmail.com>,
Natalie.Protasevich@UNISYS.com, Andrew Morton <akpm@osdl.org>
Subject: Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"
Date: Sat, 30 Jul 2005 00:57:42 +0000 [thread overview]
Message-ID: <42EAD086.4010904@gmail.com> (raw)
In-Reply-To: <42EAAFD4.4010303@web.de>
Alexander Fieroch schrieb:
> Andrew Morton wrote:
> > Is 2.6.13-rc4 running OK? If not, please cc linux-kernel on the
> reply and
> > re-summarise the problem, thanks.
>
> Same problems as before occur in kernel 2.6.13rc4, too.
>
> I've attached the syslog with kernel parameters "acpi=debug pci=routeirq
> apic=debug".
>
> Regards,
> Alexander
>
>------------------------------------------------------------------------
>
> CPU0 CPU1
> 0: 56856 0 IO-APIC-edge timer
> 1: 147 0 IO-APIC-edge i8042
> 7: 0 0 IO-APIC-edge parport0
> 8: 0 0 IO-APIC-edge rtc
> 9: 0 0 IO-APIC-level acpi
> 10: 0 0 IO-APIC-edge MPU401 UART
>169: 497 0 IO-APIC-level skge, uhci_hcd:usb5, HDA Intel
>177: 0 0 IO-APIC-level Ensoniq AudioPCI
>185: 274 0 IO-APIC-level ide2, ide3, ehci_hcd:usb1, uhci_hcd:usb2
>193: 3920 0 IO-APIC-level libata, uhci_hcd:usb3
>201: 900000 0 IO-APIC-level ide0, uhci_hcd:usb4
>209: 5 0 IO-APIC-level bttv0, ohci1394
>NMI: 52 1
>LOC: 55103 55092
>ERR: 1
>MIS: 0
>
>
>
>------------------------------------------------------------------------
>
>
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:36 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:37 orclex kernel: irq 201: nobody cared (try booting with the "irqpoll" option)
>Jul 29 12:42:37 orclex kernel:
>Jul 29 12:42:37 orclex kernel: Call Trace: <IRQ> <ffffffff80156e67>{__report_bad_irq+48} <ffffffff80156f60>{note_interrupt+144}
>Jul 29 12:42:37 orclex kernel: <ffffffff8015678b>{__do_IRQ+237} <ffffffff80110715>{do_IRQ+67}
>Jul 29 12:42:37 orclex kernel: <ffffffff8010e051>{ret_from_intr+0} <EOI> <ffffffff8016ac7f>{find_vma+22}
>Jul 29 12:42:37 orclex kernel: <ffffffff8011ecfe>{do_page_fault+409} <ffffffff801389c6>{do_wait+830}
>Jul 29 12:42:37 orclex kernel: <ffffffff801300a5>{default_wake_function+0} <ffffffff8010e4dd>{error_exit+0}
>Jul 29 12:42:37 orclex kernel:
>Jul 29 12:42:37 orclex kernel: handlers:
>Jul 29 12:42:37 orclex kernel: [<ffffffff8031c835>] (ide_intr+0x0/0x17a)
>Jul 29 12:42:37 orclex kernel: [<ffffffff803615f5>] (usb_hcd_irq+0x0/0x68)
>Jul 29 12:42:37 orclex kernel: Disabling IRQ #201
>Jul 29 12:42:37 orclex kernel: scsi: unknown opcode 0x85
>Jul 29 12:42:37 orclex lpd[4513]: restarted
>Jul 29 12:42:38 orclex nmbd[4523]: [2005/07/29 12:42:38, 0, pid=4523] nmbd/asyncdns.c:start_async_dns(149)
>Jul 29 12:42:38 orclex nmbd[4523]: started asyncdns process 4524
>Jul 29 12:42:38 orclex smartd[4530]: smartd version 5.32 Copyright (C) 2002-4 Bruce Allen
>Jul 29 12:42:38 orclex smartd[4530]: Home page is http://smartmontools.sourceforge.net/
>Jul 29 12:42:38 orclex smartd[4530]: Opened configuration file /etc/smartd.conf
>Jul 29 12:42:38 orclex smartd[4530]: Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf
>Jul 29 12:42:38 orclex smartd[4530]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
>Jul 29 12:42:38 orclex smartd[4530]: Device: /dev/hda, opened
>Jul 29 12:42:47 orclex kernel: hda: lost interrupt
>Jul 29 12:42:47 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:47 orclex smartd[4530]: Device: /dev/hda, found in smartd database.
>Jul 29 12:42:48 orclex hddtemp[4508]: /dev/hda: IC35L060AVV207-0: 36 C
>Jul 29 12:42:48 orclex kernel: irq 201: nobody cared (try booting with the "irqpoll" option)
>Jul 29 12:42:48 orclex kernel:
>Jul 29 12:42:48 orclex kernel: Call Trace: <IRQ> <ffffffff80156e67>{__report_bad_irq+48} <ffffffff80156f60>{note_interrupt+144}
>Jul 29 12:42:48 orclex kernel: <ffffffff8015678b>{__do_IRQ+237} <ffffffff80110715>{do_IRQ+67}
>Jul 29 12:42:48 orclex kernel: <ffffffff8010e051>{ret_from_intr+0} <EOI> <ffffffff8010daae>{system_call+126}
>Jul 29 12:42:48 orclex kernel:
>Jul 29 12:42:48 orclex kernel: handlers:
>Jul 29 12:42:48 orclex kernel: [<ffffffff8031c835>] (ide_intr+0x0/0x17a)
>Jul 29 12:42:48 orclex kernel: [<ffffffff803615f5>] (usb_hcd_irq+0x0/0x68)
>Jul 29 12:42:48 orclex kernel: Disabling IRQ #201
>Jul 29 12:42:58 orclex kernel: hda: lost interrupt
>Jul 29 12:42:58 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Jul 29 12:42:59 orclex smartd[4530]: Device: /dev/hda, is SMART capable. Adding to "monitor" list.
>Jul 29 12:42:59 orclex kernel: hdb: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>
>
Hello Alexander,
do you run
A.) SATA in Enhanced Mode
B.) SATA+PATA or PATA operation mode?
This problem I can reproduce when I set A.)+B.) in bios I
exactly get the same behavior of confused cd - drives.
Greets
Best regards
Michael
next prev parent reply other threads:[~2005-07-29 22:55 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-18 22:24 [2.6.12rc4] PROBLEM: "drive appears confused" and "irq 18: nobody cared!" Alexander Fieroch
2005-05-27 19:30 ` Alexander Fieroch
2005-05-28 0:16 ` Andrew Morton
2005-05-29 20:18 ` Alexander Fieroch
2005-06-14 8:04 ` Bartlomiej Zolnierkiewicz
2005-06-15 20:39 ` Alexander Fieroch
2005-06-15 21:30 ` Andrew Morton
2005-06-16 22:23 ` Alan Cox
2005-06-16 23:52 ` Bartlomiej Zolnierkiewicz
2005-06-17 10:49 ` Alexander Fieroch
2005-06-17 12:38 ` Alan Cox
2005-06-17 17:05 ` Alexander Fieroch
2005-06-17 17:17 ` Jesper Juhl
2005-06-29 13:47 ` Alexander Fieroch
2005-07-06 10:17 ` Alexander Fieroch
2005-07-29 22:38 ` Alexander Fieroch
2005-07-30 0:57 ` Michael Thonke [this message]
2005-07-29 23:05 ` Parag Warudkar
2005-07-30 1:42 ` Alexey Dobriyan
2005-08-01 14:38 ` Alexander Fieroch
2005-08-01 14:56 ` Alexander Fieroch
2005-08-01 19:23 ` Krzysztof Halasa
2005-08-01 19:28 ` Bartlomiej Zolnierkiewicz
2005-08-09 17:28 ` Alexander Fieroch
2005-08-09 22:14 ` Alan Cox
2005-08-19 11:12 ` Alexander Fieroch
2005-07-31 22:15 ` Alexander Fieroch
2005-07-06 10:19 ` Alexander Fieroch
[not found] ` <42C0953B.8000506@web.de>
2005-06-28 13:47 ` [2.6.12rc4] " Alan Cox
2005-08-04 20:25 ` Andrew Morton
2005-08-05 10:19 ` Alan Cox
2005-06-17 11:29 ` Alexander Fieroch
2005-06-13 17:59 ` Alexander Fieroch
2005-07-06 15:33 Protasevich, Natalie
2005-07-06 23:20 ` Alexander Fieroch
2005-07-11 5:35 Protasevich, Natalie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42EAD086.4010904@gmail.com \
--to=iogl64nx@gmail.com \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=Natalie.Protasevich@UNISYS.com \
--cc=adobriyan@gmail.com \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=axboe@suse.de \
--cc=bzolnier@gmail.com \
--cc=fieroch@web.de \
--cc=jesper.juhl@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).