* linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic
@ 2006-01-12 14:58 Alexander E. Patrakov
2006-01-12 15:59 ` Dmitry Torokhov
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Alexander E. Patrakov @ 2006-01-12 14:58 UTC (permalink / raw)
To: LKML; +Cc: Alan Cox
[-- Attachment #1: Type: text/plain, Size: 2181 bytes --]
Hello,
the main linux tree started suffering the same bug as described for -mm
earlier in http://lkml.org/lkml/2005/11/7/147:
if I put load on my system, connect to the Internet using my cellphone
(/dev/ttyS0) and do something, it stops reacting to PS/2 keyboard
events, but still understands PS/2 mouse. The PPP load monitor shows
huge transfer rate (several megabytes per second) consisting of the
infinitely replicated several last packets. events/0 consumes all the
CPU. tty buffering revamping patch is the obvious candidate, but I
haven't tried to revert it yet.
As recommended earlier, I hit Sysrq+T several times. Config ans dmesg
with the results attached. lspci and lspci -n below:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1a)
0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 40)0000:00:0b.0 Communication controller: Lucent Microelectronics
LT WinModem (rev 02)
0000:00:0d.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A
[FM801] (rev b2)
0000:00:0d.1 Input device controller: Fortemedia, Inc Xwave QS3000A
[FM801 game port] (rev b2)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280
[Radeon 9200] (rev 01)
0000:00:00.0 0600: 1106:0691 (rev c4)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 1a)
0000:00:07.4 0c05: 1106:3057 (rev 40)
0000:00:0b.0 0780: 11c1:044c (rev 02)
0000:00:0d.0 0401: 1319:0801 (rev b2)
0000:00:0d.1 0980: 1319:0802 (rev b2)
0000:01:00.0 0300: 1002:5961 (rev 01)
The test load is the parallel execution of the following:
cat /dev/urandom >/dev/nul
find / -xdev
glxgears
LIBGL_ALWAYS_INDIRECT=1 glxgears
thunderbird
--
Alexander E. Patrakov
[-- Attachment #2: kern.log --]
[-- Type: text/x-log, Size: 48679 bytes --]
[ 27.644679] lp0: using parport0 (interrupt-driven).
[ 27.680500] kobject usbcore: registering. parent: <NULL>, set: module
[ 27.680567] kobject_uevent
[ 27.680591] fill_kobj_path: path = '/module/usbcore'
[ 27.681106] subsystem usb: registering
[ 27.681111] kobject usb: registering. parent: <NULL>, set: bus
[ 27.681131] kobject devices: registering. parent: usb, set: <NULL>
[ 27.681146] kobject drivers: registering. parent: usb, set: <NULL>
[ 27.681166] subsystem usb_host: registering
[ 27.681170] kobject usb_host: registering. parent: <NULL>, set: class
[ 27.681202] subsystem usb: registering
[ 27.681206] kobject usb: registering. parent: <NULL>, set: class
[ 27.681243] kobject usbfs: registering. parent: <NULL>, set: drivers
[ 27.681257] kobject_uevent
[ 27.681271] fill_kobj_path: path = '/bus/usb/drivers/usbfs'
[ 27.681498] usbcore: registered new driver usbfs
[ 27.681512] subsystem usb_device: registering
[ 27.681516] kobject usb_device: registering. parent: <NULL>, set: class
[ 27.681554] kobject hub: registering. parent: <NULL>, set: drivers
[ 27.681567] kobject_uevent
[ 27.681580] fill_kobj_path: path = '/bus/usb/drivers/hub'
[ 27.681775] usbcore: registered new driver hub
[ 27.681908] kobject usb: registering. parent: <NULL>, set: drivers
[ 27.681925] kobject_uevent
[ 27.681938] fill_kobj_path: path = '/bus/usb/drivers/usb'
[ 27.694679] kobject uhci_hcd: registering. parent: <NULL>, set: module
[ 27.694739] kobject_uevent
[ 27.694761] fill_kobj_path: path = '/module/uhci_hcd'
[ 27.695195] USB Universal Host Controller Interface driver v2.3
[ 27.695247] kobject uhci_hcd: registering. parent: <NULL>, set: drivers
[ 27.695272] kobject_uevent
[ 27.695287] fill_kobj_path: path = '/bus/pci/drivers/uhci_hcd'
[ 27.695532] PCI: Found IRQ 11 for device 0000:00:07.2
[ 27.695551] PCI: Sharing IRQ 11 with 0000:00:0b.0
[ 27.695585] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 27.695627] kobject usb_host1: registering. parent: usb_host, set: class_obj
[ 27.695671] kobject_uevent
[ 27.695686] fill_kobj_path: path = '/class/usb_host/usb_host1'
[ 27.695694] fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2'
[ 27.696081] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 27.696102] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d800
[ 27.696305] kobject usb1: registering. parent: 0000:00:07.2, set: devices
[ 27.696335] kobject_uevent
[ 27.696352] fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1'
[ 27.696642] kobject ep_00: registering. parent: usb1, set: <NULL>
[ 27.696679] usb usb1: configuration #1 chosen from 1 choice
[ 27.696699] kobject 1-0:1.0: registering. parent: usb1, set: devices
[ 27.696725] kobject_uevent
[ 27.696738] fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0'
[ 27.696981] hub 1-0:1.0: USB hub found
[ 27.697037] hub 1-0:1.0: 2 ports detected
[ 27.797878] kobject ep_81: registering. parent: 1-0:1.0, set: <NULL>
[ 27.797945] kobject usbdev1.1: registering. parent: usb_device, set: class_obj
[ 27.797974] kobject_uevent
[ 27.798011] fill_kobj_path: path = '/class/usb_device/usbdev1.1'
[ 27.798019] fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1'
[ 27.825461] kobject usb_storage: registering. parent: <NULL>, set: module
[ 27.825524] kobject_uevent
[ 27.825543] fill_kobj_path: path = '/module/usb_storage'
[ 27.825997] Initializing USB Mass Storage driver...
[ 27.826010] kobject usb-storage: registering. parent: <NULL>, set: drivers
[ 27.826045] kobject_uevent
[ 27.826063] fill_kobj_path: path = '/bus/usb/drivers/usb-storage'
[ 28.003467] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 28.125471] kobject 1-1: registering. parent: usb1, set: devices
[ 28.125515] kobject_uevent
[ 28.125533] fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1/1-1'
[ 28.125794] kobject ep_00: registering. parent: 1-1, set: <NULL>
[ 28.126459] usb 1-1: configuration #1 chosen from 1 choice
[ 28.127457] kobject 1-1:1.0: registering. parent: 1-1, set: devices
[ 28.127502] kobject_uevent
[ 28.127516] fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0'
[ 28.127746] kobject ep_81: registering. parent: 1-1:1.0, set: <NULL>
[ 28.127786] kobject usbdev1.2: registering. parent: usb_device, set: class_obj
[ 28.127816] kobject_uevent
[ 28.127829] fill_kobj_path: path = '/class/usb_device/usbdev1.2'
[ 28.127839] fill_kobj_path: path = '/devices/pci0000:00/0000:00:07.2/usb1/1-1'
[ 28.231121] usbcore: registered new driver usb-storage
[ 28.231129] USB Mass Storage support registered.
[ 28.250643] kobject sd_mod: registering. parent: <NULL>, set: module
[ 28.250701] kobject_uevent
[ 28.250722] fill_kobj_path: path = '/module/sd_mod'
[ 28.251169] kobject sd: registering. parent: <NULL>, set: drivers
[ 28.251186] kobject_uevent
[ 28.251204] fill_kobj_path: path = '/bus/scsi/drivers/sd'
[ 28.277621] kobject usblp: registering. parent: <NULL>, set: module
[ 28.277682] kobject_uevent
[ 28.277703] fill_kobj_path: path = '/module/usblp'
[ 28.278153] kobject usblp: registering. parent: <NULL>, set: drivers
[ 28.278172] kobject_uevent
[ 28.278217] fill_kobj_path: path = '/bus/usb/drivers/usblp'
[ 28.278442] usbcore: registered new driver usblp
[ 28.278450] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 28.292304] kobject mousedev: registering. parent: <NULL>, set: module
[ 28.292400] kobject_uevent
[ 28.292423] fill_kobj_path: path = '/module/mousedev'
[ 28.292842] kobject mice: registering. parent: input, set: class_obj
[ 28.292863] kobject_uevent
[ 28.292877] fill_kobj_path: path = '/class/input/mice'
[ 28.293149] kobject psaux: registering. parent: misc, set: class_obj
[ 28.293170] kobject_uevent
[ 28.293183] fill_kobj_path: path = '/class/misc/psaux'
[ 28.293386] mice: PS/2 mouse device common for all mice
[ 28.316370] kobject psmouse: registering. parent: <NULL>, set: module
[ 28.316430] kobject_uevent
[ 28.316455] fill_kobj_path: path = '/module/psmouse'
[ 28.316911] kobject psmouse: registering. parent: <NULL>, set: drivers
[ 28.316945] kobject_uevent
[ 28.316962] fill_kobj_path: path = '/bus/serio/drivers/psmouse'
[ 28.341702] kobject agpgart: registering. parent: <NULL>, set: module
[ 28.341763] kobject_uevent
[ 28.341783] fill_kobj_path: path = '/module/agpgart'
[ 28.342265] Linux agpgart interface v0.101 (c) Dave Jones
[ 28.361058] kobject via_agp: registering. parent: <NULL>, set: module
[ 28.361104] kobject_uevent
[ 28.361121] fill_kobj_path: path = '/module/via_agp'
[ 28.361470] kobject agpgart-via: registering. parent: <NULL>, set: drivers
[ 28.361492] kobject_uevent
[ 28.361510] fill_kobj_path: path = '/bus/pci/drivers/agpgart-via'
[ 28.361716] agpgart: Detected VIA Apollo Pro 133 chipset
[ 28.366103] kobject agpgart: registering. parent: misc, set: class_obj
[ 28.366150] kobject_uevent
[ 28.366170] fill_kobj_path: path = '/class/misc/agpgart'
[ 28.366424] agpgart: AGP aperture is 64M @ 0xe0000000
[ 28.402423] kobject drm: registering. parent: <NULL>, set: module
[ 28.402501] kobject_uevent
[ 28.402525] fill_kobj_path: path = '/module/drm'
[ 28.403012] subsystem drm: registering
[ 28.403018] kobject drm: registering. parent: <NULL>, set: class
[ 28.403050] [drm] Initialized drm 1.0.0 20040925
[ 28.455204] kobject input1: registering. parent: input, set: class_obj
[ 28.455260] kobject_uevent
[ 28.455279] fill_kobj_path: path = '/class/input/input1'
[ 28.455289] fill_kobj_path: path = '/devices/platform/i8042/serio0'
[ 28.455666] fill_kobj_path: path = '/class/input/input1'
[ 28.455671] input: GenPS/2 Genius <NULL> as /class/input/input1
[ 28.455692] kobject mouse0: registering. parent: input1, set: class_obj
[ 28.455716] kobject_uevent
[ 28.455729] fill_kobj_path: path = '/class/input/input1/mouse0'
[ 28.455736] fill_kobj_path: path = '/devices/platform/i8042/serio0'
[ 28.462257] kobject radeon: registering. parent: <NULL>, set: module
[ 28.462326] kobject_uevent
[ 28.462348] fill_kobj_path: path = '/module/radeon'
[ 28.463009] kobject card0: registering. parent: drm, set: class_obj
[ 28.463040] kobject_uevent
[ 28.463060] fill_kobj_path: path = '/class/drm/card0'
[ 28.463069] fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
[ 28.463291] [drm] Initialized radeon 1.19.0 20050911 on minor 0:
[ 30.880459] kjournald starting. Commit interval 5 seconds
[ 30.880631] EXT3 FS on dm-5, internal journal
[ 30.880642] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.919236] kjournald starting. Commit interval 5 seconds
[ 30.919372] EXT3 FS on dm-0, internal journal
[ 30.919382] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.966605] kjournald starting. Commit interval 5 seconds
[ 30.966804] EXT3 FS on dm-2, internal journal
[ 30.966813] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.020790] kobject reiserfs: registering. parent: <NULL>, set: module
[ 31.020860] kobject_uevent
[ 31.020884] fill_kobj_path: path = '/module/reiserfs'
[ 31.043543] ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
[ 31.225840] ReiserFS: dm-1: using ordered data mode
[ 31.238461] ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 31.243491] ReiserFS: dm-1: checking transaction log (dm-1)
[ 31.294842] ReiserFS: dm-1: Using r5 hash to sort names
[ 31.365135] kobject fat: registering. parent: <NULL>, set: module
[ 31.365200] kobject_uevent
[ 31.365223] fill_kobj_path: path = '/module/fat'
[ 31.383964] kobject vfat: registering. parent: <NULL>, set: module
[ 31.384018] kobject_uevent
[ 31.384037] fill_kobj_path: path = '/module/vfat'
[ 31.384702] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 31.401572] kobject nls_cp437: registering. parent: <NULL>, set: module
[ 31.401620] kobject_uevent
[ 31.401662] fill_kobj_path: path = '/module/nls_cp437'
[ 31.417034] kobject nls_utf8: registering. parent: <NULL>, set: module
[ 31.417081] kobject_uevent
[ 31.417100] fill_kobj_path: path = '/module/nls_utf8'
[ 35.060707] kobject vcs2: registering. parent: vc, set: class_obj
[ 35.060751] kobject_uevent
[ 35.060807] fill_kobj_path: path = '/class/vc/vcs2'
[ 35.061106] kobject vcsa2: registering. parent: vc, set: class_obj
[ 35.061130] kobject_uevent
[ 35.061144] fill_kobj_path: path = '/class/vc/vcsa2'
[ 35.061432] kobject_uevent
[ 35.061450] fill_kobj_path: path = '/class/vc/vcs2'
[ 35.061679] kobject vcs2: cleaning up
[ 35.061690] kobject_uevent
[ 35.061701] fill_kobj_path: path = '/class/vc/vcsa2'
[ 35.061919] kobject vcsa2: cleaning up
[ 35.062149] kobject vcs3: registering. parent: vc, set: class_obj
[ 35.062174] kobject_uevent
[ 35.062189] fill_kobj_path: path = '/class/vc/vcs3'
[ 35.062419] kobject vcsa3: registering. parent: vc, set: class_obj
[ 35.062437] kobject_uevent
[ 35.062450] fill_kobj_path: path = '/class/vc/vcsa3'
[ 35.062729] kobject_uevent
[ 35.062743] fill_kobj_path: path = '/class/vc/vcs3'
[ 35.063001] kobject vcs3: cleaning up
[ 35.063011] kobject_uevent
[ 35.063023] fill_kobj_path: path = '/class/vc/vcsa3'
[ 35.063216] kobject vcsa3: cleaning up
[ 35.063456] kobject vcs4: registering. parent: vc, set: class_obj
[ 35.063485] kobject_uevent
[ 35.063500] fill_kobj_path: path = '/class/vc/vcs4'
[ 35.063723] kobject vcsa4: registering. parent: vc, set: class_obj
[ 35.063742] kobject_uevent
[ 35.063786] fill_kobj_path: path = '/class/vc/vcsa4'
[ 35.064081] kobject_uevent
[ 35.064095] fill_kobj_path: path = '/class/vc/vcs4'
[ 35.064312] kobject vcs4: cleaning up
[ 35.064322] kobject_uevent
[ 35.064334] fill_kobj_path: path = '/class/vc/vcsa4'
[ 35.064526] kobject vcsa4: cleaning up
[ 35.064914] kobject vcs5: registering. parent: vc, set: class_obj
[ 35.064952] kobject_uevent
[ 35.064969] fill_kobj_path: path = '/class/vc/vcs5'
[ 35.065212] kobject vcsa5: registering. parent: vc, set: class_obj
[ 35.065232] kobject_uevent
[ 35.065246] fill_kobj_path: path = '/class/vc/vcsa5'
[ 35.065559] kobject_uevent
[ 35.065574] fill_kobj_path: path = '/class/vc/vcs5'
[ 35.065812] kobject vcs5: cleaning up
[ 35.065823] kobject_uevent
[ 35.065834] fill_kobj_path: path = '/class/vc/vcsa5'
[ 35.066005] kobject vcsa5: cleaning up
[ 35.066257] kobject vcs6: registering. parent: vc, set: class_obj
[ 35.066287] kobject_uevent
[ 35.066301] fill_kobj_path: path = '/class/vc/vcs6'
[ 35.066509] kobject vcsa6: registering. parent: vc, set: class_obj
[ 35.066529] kobject_uevent
[ 35.066542] fill_kobj_path: path = '/class/vc/vcsa6'
[ 35.066992] kobject_uevent
[ 35.067013] fill_kobj_path: path = '/class/vc/vcs6'
[ 35.067255] kobject vcs6: cleaning up
[ 35.067267] kobject_uevent
[ 35.067279] fill_kobj_path: path = '/class/vc/vcsa6'
[ 35.067443] kobject vcsa6: cleaning up
[ 35.288888] kobject_uevent
[ 35.288921] fill_kobj_path: path = '/class/vc/vcs1'
[ 35.289229] kobject vcs1: cleaning up
[ 35.289241] kobject_uevent
[ 35.289255] fill_kobj_path: path = '/class/vc/vcsa1'
[ 35.289497] kobject vcsa1: cleaning up
[ 35.321836] kobject vcs1: registering. parent: vc, set: class_obj
[ 35.321878] kobject_uevent
[ 35.321897] fill_kobj_path: path = '/class/vc/vcs1'
[ 35.322198] kobject vcsa1: registering. parent: vc, set: class_obj
[ 35.322219] kobject_uevent
[ 35.322230] fill_kobj_path: path = '/class/vc/vcsa1'
[ 35.322539] kobject_uevent
[ 35.322556] fill_kobj_path: path = '/class/vc/vcs1'
[ 35.322751] kobject vcs1: cleaning up
[ 35.322761] kobject_uevent
[ 35.322774] fill_kobj_path: path = '/class/vc/vcsa1'
[ 35.322959] kobject vcsa1: cleaning up
[ 35.323056] kobject vcs1: registering. parent: vc, set: class_obj
[ 35.323078] kobject_uevent
[ 35.323089] fill_kobj_path: path = '/class/vc/vcs1'
[ 35.323319] kobject vcsa1: registering. parent: vc, set: class_obj
[ 35.323337] kobject_uevent
[ 35.323348] fill_kobj_path: path = '/class/vc/vcsa1'
[ 35.323599] kobject_uevent
[ 35.323614] fill_kobj_path: path = '/class/vc/vcs1'
[ 35.323803] kobject vcs1: cleaning up
[ 35.323811] kobject_uevent
[ 35.323825] fill_kobj_path: path = '/class/vc/vcsa1'
[ 35.324029] kobject vcsa1: cleaning up
[ 35.324116] kobject vcs1: registering. parent: vc, set: class_obj
[ 35.324136] kobject_uevent
[ 35.324147] fill_kobj_path: path = '/class/vc/vcs1'
[ 35.324371] kobject vcsa1: registering. parent: vc, set: class_obj
[ 35.324389] kobject_uevent
[ 35.324400] fill_kobj_path: path = '/class/vc/vcsa1'
[ 35.324715] kobject_uevent
[ 35.324730] fill_kobj_path: path = '/class/vc/vcs1'
[ 35.324929] kobject vcs1: cleaning up
[ 35.324937] kobject_uevent
[ 35.324951] fill_kobj_path: path = '/class/vc/vcsa1'
[ 35.325153] kobject vcsa1: cleaning up
[ 35.326321] kobject vcs1: registering. parent: vc, set: class_obj
[ 35.326367] kobject_uevent
[ 35.326384] fill_kobj_path: path = '/class/vc/vcs1'
[ 35.327476] kobject vcsa1: registering. parent: vc, set: class_obj
[ 35.327525] kobject_uevent
[ 35.327539] fill_kobj_path: path = '/class/vc/vcsa1'
[ 42.129251] kobject vcs2: registering. parent: vc, set: class_obj
[ 42.129641] kobject_uevent
[ 42.129766] fill_kobj_path: path = '/class/vc/vcs2'
[ 42.130222] kobject vcsa2: registering. parent: vc, set: class_obj
[ 42.130541] kobject_uevent
[ 42.130661] fill_kobj_path: path = '/class/vc/vcsa2'
[ 42.133459] kobject vcs3: registering. parent: vc, set: class_obj
[ 42.133834] kobject_uevent
[ 42.133963] fill_kobj_path: path = '/class/vc/vcs3'
[ 42.134376] kobject vcsa3: registering. parent: vc, set: class_obj
[ 42.134545] kobject_uevent
[ 42.134652] fill_kobj_path: path = '/class/vc/vcsa3'
[ 42.138890] kobject vcs4: registering. parent: vc, set: class_obj
[ 42.139336] kobject_uevent
[ 42.139474] fill_kobj_path: path = '/class/vc/vcs4'
[ 42.139871] kobject vcsa4: registering. parent: vc, set: class_obj
[ 42.140158] kobject_uevent
[ 42.140278] fill_kobj_path: path = '/class/vc/vcsa4'
[ 42.146104] kobject vcs6: registering. parent: vc, set: class_obj
[ 42.146507] kobject_uevent
[ 42.146645] fill_kobj_path: path = '/class/vc/vcs6'
[ 42.147226] kobject vcsa6: registering. parent: vc, set: class_obj
[ 42.147438] kobject_uevent
[ 42.147544] fill_kobj_path: path = '/class/vc/vcsa6'
[ 42.149764] kobject vcs5: registering. parent: vc, set: class_obj
[ 42.150189] kobject_uevent
[ 42.150329] fill_kobj_path: path = '/class/vc/vcs5'
[ 42.150693] kobject vcsa5: registering. parent: vc, set: class_obj
[ 42.150863] kobject_uevent
[ 42.150971] fill_kobj_path: path = '/class/vc/vcsa5'
[ 43.440254] kobject vcs7: registering. parent: vc, set: class_obj
[ 43.440295] kobject_uevent
[ 43.440316] fill_kobj_path: path = '/class/vc/vcs7'
[ 43.440776] kobject vcsa7: registering. parent: vc, set: class_obj
[ 43.440802] kobject_uevent
[ 43.440816] fill_kobj_path: path = '/class/vc/vcsa7'
[ 46.245283] mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x8000000
[ 46.245699] mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x8000000
[ 46.245948] mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x8000000
[ 46.246447] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 46.246472] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 46.246514] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 46.278695] [drm] Loading R200 Microcode
[ 204.963598] kobject slhc: registering. parent: <NULL>, set: module
[ 204.963662] kobject_uevent
[ 204.963680] fill_kobj_path: path = '/module/slhc'
[ 204.964037] CSLIP: code copyright 1989 Regents of the University of California
[ 204.976237] kobject ppp_generic: registering. parent: <NULL>, set: module
[ 204.976321] kobject_uevent
[ 204.976340] fill_kobj_path: path = '/module/ppp_generic'
[ 204.976726] PPP generic driver version 2.4.2
[ 204.976747] subsystem ppp: registering
[ 204.976750] kobject ppp: registering. parent: <NULL>, set: class
[ 204.976777] kobject ppp: registering. parent: ppp, set: class_obj
[ 204.976797] kobject_uevent
[ 204.976810] fill_kobj_path: path = '/class/ppp/ppp'
[ 209.617389] kobject crc_ccitt: registering. parent: <NULL>, set: module
[ 209.617445] kobject_uevent
[ 209.617462] fill_kobj_path: path = '/module/crc_ccitt'
[ 209.760637] kobject ppp_async: registering. parent: <NULL>, set: module
[ 209.760713] kobject_uevent
[ 209.760732] fill_kobj_path: path = '/module/ppp_async'
[ 209.763877] kobject ppp0: registering. parent: net, set: class_obj
[ 209.764142] kobject_uevent
[ 209.764258] fill_kobj_path: path = '/class/net/ppp0'
[ 211.031677] kobject bsd_comp: registering. parent: <NULL>, set: module
[ 211.031733] kobject_uevent
[ 211.031749] fill_kobj_path: path = '/module/bsd_comp'
[ 211.032111] PPP BSD Compression module registered
[ 211.310838] kobject ppp_deflate: registering. parent: <NULL>, set: module
[ 211.310893] kobject_uevent
[ 211.310933] fill_kobj_path: path = '/module/ppp_deflate'
[ 211.311322] PPP Deflate Compression module registered
Jan 12 19:29:43 home kernel: n_lock_irqsave+0x22/0x30
[ 798.047758] [<c0131b10>] prepare_to_wait+0x20/0x70
[ 798.047769] [<c02ce7c5>] unix_stream_data_wait+0xd5/0x110
[ 798.047777] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 798.047788] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 798.047796] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.047806] [<c02cec3d>] unix_stream_recvmsg+0x43d/0x4c0
[ 798.047824] [<c02d14ef>] __mutex_lock_slowpath+0x27f/0x480
[ 798.047834] [<c02798f1>] do_sock_read+0xa1/0xb0
[ 798.047844] [<c0279a95>] sock_aio_read+0x95/0xa0
[ 798.047865] [<c0161411>] do_sync_read+0xc1/0x110
[ 798.047875] [<c01347bd>] ktime_get+0x1d/0x50
[ 798.047892] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 798.047902] [<c01e758b>] _atomic_dec_and_lock+0x3b/0x40
[ 798.047911] [<c017fb13>] mntput_no_expire+0x23/0x90
[ 798.047922] [<c0162729>] __fput+0x179/0x1d0
[ 798.047932] [<c01615c4>] vfs_read+0x164/0x180
[ 798.047943] [<c01618c1>] sys_read+0x51/0x80
[ 798.047953] [<c0103315>] syscall_call+0x7/0xb
[ 798.047968] cat D E09F082A 6152 1429 1 1578 (L-TLB)
[ 798.047996] d95e5cd4 d90cd030 c03ad5a0 e09f082a 00000001 00000001 00000000 df1b34f8
[ 798.048008] c14db58c dfc68ab0 000ed1be d51c4596 000000b4 d90cd030 d90cd158 00000c51
[ 798.048020] c14db554 d95e5d18 c14db58c c012da3a 00200096 c02d2642 c0327d60 fffffdff
[ 798.048033] Call Trace:
[ 798.048038] [<e09f082a>] drm_vbl_send_signals+0x2a/0xba [drm]
[ 798.048086] [<c012da3a>] flush_cpu_workqueue+0x9a/0x1c0
[ 798.048094] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 798.048103] [<c02d2845>] _spin_unlock+0x15/0x30
[ 798.048111] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 798.048121] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 798.048133] [<c012db88>] flush_workqueue+0x28/0x30
[ 798.048141] [<c0233052>] release_dev+0x4d2/0x7b0
[ 798.048153] [<c02d2845>] _spin_unlock+0x15/0x30
[ 798.048161] [<c014cfee>] zap_pte_range+0xae/0x230
[ 798.048170] [<c015de5c>] free_block+0xec/0x180
[ 798.048178] [<c01ec310>] memmove+0x50/0x54
[ 798.048188] [<c015bf06>] poison_obj+0x36/0x60
[ 798.048198] [<c02d2845>] _spin_unlock+0x15/0x30
[ 798.048206] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 798.048213] [<c0233860>] tty_release+0x0/0x20
[ 798.048220] [<c0233874>] tty_release+0x14/0x20
[ 798.048226] [<c0162763>] __fput+0x1b3/0x1d0
[ 798.048238] [<c0160bad>] filp_close+0x4d/0x80
[ 798.048248] [<c011ebc4>] put_files_struct+0x74/0xb0
[ 798.048259] [<c011f945>] do_exit+0x125/0x440
[ 798.048270] [<c011fcdc>] do_group_exit+0x3c/0xb0
[ 798.048280] [<c0129643>] get_signal_to_deliver+0x243/0x350
[ 798.048292] [<c010311f>] do_signal+0x8f/0x120
[ 798.048304] [<c01ec72c>] copy_to_user+0x6c/0x90
[ 798.048314] [<c022fb09>] extract_entropy_user+0x89/0xf0
[ 798.048333] [<c02d27eb>] _spin_lock+0x1b/0x30
[ 798.048344] [<c0161577>] vfs_read+0x117/0x180
[ 798.048355] [<c01618c1>] sys_read+0x51/0x80
[ 798.048365] [<c01031e7>] do_notify_resume+0x37/0x3c
[ 798.048372] [<c01033a6>] work_notifysig+0x13/0x19
[ 798.048387] bash S C0335160 6900 1459 1424 1467 1425 (NOTLB)
[ 798.048416] d975be88 da53ea90 c03ad5a0 c0335160 1ee55e6c 0002c36b de41fbe0 dae8a050
[ 798.048428] dae8a050 dae8a050 00000512 dac7e1b3 000000b0 da53ea90 da53ebb8 7fffffff
[ 798.048440] d97bcb64 7fffffff d97bcb58 c02d0fc9 dae8a050 00200046 00000001 d97bccb8
[ 798.048453] Call Trace:
[ 798.048465] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 798.048474] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 798.048483] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.048492] [<c02376d3>] read_chan+0x513/0x610
[ 798.048499] [<c01196a7>] __wake_up_locked+0x27/0x30
[ 798.048511] [<c0119590>] default_wake_function+0x0/0x20
[ 798.048519] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.048528] [<c0119590>] default_wake_function+0x0/0x20
[ 798.048537] [<c02d2bf6>] .text.lock.kernel_lock+0x2b/0x3a
[ 798.048546] [<c0231ff1>] tty_read+0xe1/0xf0
[ 798.048557] [<c016150e>] vfs_read+0xae/0x180
[ 798.048568] [<c01618c1>] sys_read+0x51/0x80
[ 798.048579] [<c0103315>] syscall_call+0x7/0xb
[ 798.048593] bash S C0335160 7016 1467 1424 1548 1459 (NOTLB)
[ 798.048623] d7c29e88 d9819580 c03ad5a0 c0335160 11de9c18 0000bef1 de41fbe0 dae8a050
[ 798.048636] dae8a050 d9819ab0 00000713 bc460012 0000002f d9819580 d98196a8 7fffffff
[ 798.048648] d97bc358 7fffffff d97bc34c c02d0fc9 c0101a93 dae8a210 d9819580 d97bc4ac
[ 798.048661] Call Trace:
[ 798.048673] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 798.048680] [<c0101a93>] __switch_to+0x23/0x220
[ 798.048688] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 798.048697] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.048706] [<c02376d3>] read_chan+0x513/0x610
[ 798.048718] [<c0119590>] default_wake_function+0x0/0x20
[ 798.048727] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.048735] [<c0119590>] default_wake_function+0x0/0x20
[ 798.048744] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 798.048753] [<c0231ff1>] tty_read+0xe1/0xf0
[ 798.048764] [<c016150e>] vfs_read+0xae/0x180
[ 798.048775] [<c01618c1>] sys_read+0x51/0x80
[ 798.048785] [<c0103315>] syscall_call+0x7/0xb
[ 798.048800] pppd S 00000032 6408 1478 1 1544 1424 (NOTLB)
[ 798.048827] d7965eac dfcdbab0 c03ad5e0 00000032 000000d0 da53e560 00000044 0beb2830
[ 798.048839] 00000032 dfcdbab0 0000758f 0beb977c 00000032 da53e560 da53e688 7fffffff
[ 798.048851] 00000000 0000000a 00000000 c02d0fc9 c02d2642 de469af4 d72a2028 de469af4
[ 798.048863] Call Trace:
[ 798.048876] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 798.048883] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 798.048892] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.048900] [<e0a7c383>] ppp_poll+0x33/0x90 [ppp_generic]
[ 798.048921] [<c0176397>] do_select+0x197/0x300
[ 798.048937] [<c0176030>] __pollwait+0x0/0xd0
[ 798.048947] [<c017680c>] sys_select+0x2cc/0x4b0
[ 798.048955] [<c02d2916>] _spin_unlock_irq+0x16/0x30
[ 798.048971] [<c0103315>] syscall_call+0x7/0xb
[ 798.048985] gconfd-2 S 00200296 5988 1544 1 1578 1478 (NOTLB)
[ 798.049011] d755bf08 d7a86a90 c03ad5a0 00200296 c02d2642 c03b2ba0 c03b2ba0 d755bf1c
[ 798.049024] 00005fc9 dfc68ab0 00026afe 2ad9b5a7 000000b9 d7a86a90 d7a86bb8 d755bf1c
[ 798.049036] 0007bc46 d755bf60 00005fc9 c02d0f77 d755bf1c 0007bc46 d665a7e0 c03b36a8
[ 798.049048] Call Trace:
[ 798.049053] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 798.049067] [<c02d0f77>] schedule_timeout+0x57/0xb0
[ 798.049077] [<c0126970>] process_timeout+0x0/0x10
[ 798.049087] [<c0176b38>] do_poll+0xa8/0xd0
[ 798.049099] [<c0176ce1>] sys_poll+0x181/0x270
[ 798.049109] [<c01216bc>] sys_gettimeofday+0x3c/0x90
[ 798.049117] [<c0176030>] __pollwait+0x0/0xd0
[ 798.049126] [<c0103315>] syscall_call+0x7/0xb
[ 798.049141] bash S C0335160 7028 1548 1424 1587 1467 (NOTLB)
[ 798.049171] d7953e88 da53e030 c03ad5a0 c0335160 e586c5f4 0002c0c0 de41fbe0 dae8a050
[ 798.049184] dae8a050 d4339ab0 000004f0 303a0c42 000000b0 da53e030 da53e158 7fffffff
[ 798.049196] d63653d0 7fffffff d63653c4 c02d0fc9 c0101a93 dae8a210 da53e030 d6365524
[ 798.049209] Call Trace:
[ 798.049221] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 798.049228] [<c0101a93>] __switch_to+0x23/0x220
[ 798.049236] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 798.049245] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.049254] [<c02376d3>] read_chan+0x513/0x610
[ 798.049266] [<c0119590>] default_wake_function+0x0/0x20
[ 798.049274] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.049283] [<c0119590>] default_wake_function+0x0/0x20
[ 798.049292] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 798.049301] [<c0231ff1>] tty_read+0xe1/0xf0
[ 798.049311] [<c016150e>] vfs_read+0xae/0x180
[ 798.049322] [<c01618c1>] sys_read+0x51/0x80
[ 798.049333] [<c0103315>] syscall_call+0x7/0xb
[ 798.049347] find D D2069D04 6228 1578 1 1429 1544 (L-TLB)
[ 798.049374] d2069cd4 d4339ab0 c03ad5a0 d2069d04 00000000 d2069d0c d2069cac c02d0ece
[ 798.049387] c14db58c dfc68ab0 00007715 f7a85996 000000b2 d4339ab0 d4339bd8 00000c51
[ 798.049399] c14db554 d2069d18 c14db58c c012da3a 00000002 c1402400 cf2ad11c 00000002
[ 798.049411] Call Trace:
[ 798.049418] [<c02d0ece>] io_schedule+0xe/0x20
[ 798.049430] [<c012da3a>] flush_cpu_workqueue+0x9a/0x1c0
[ 798.049440] [<c0131ca0>] wake_bit_function+0x0/0x60
[ 798.049449] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 798.049459] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 798.049471] [<c012db88>] flush_workqueue+0x28/0x30
[ 798.049479] [<c0233052>] release_dev+0x4d2/0x7b0
[ 798.049490] [<c015de5c>] free_block+0xec/0x180
[ 798.049498] [<c01ec310>] memmove+0x50/0x54
[ 798.049507] [<c0144fba>] free_hot_cold_page+0x11a/0x170
[ 798.049518] [<c015bf06>] poison_obj+0x36/0x60
[ 798.049527] [<c015d71d>] cache_free_debugcheck+0x11d/0x250
[ 798.049536] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 798.049544] [<c0233860>] tty_release+0x0/0x20
[ 798.049550] [<c0233874>] tty_release+0x14/0x20
[ 798.049557] [<c0162763>] __fput+0x1b3/0x1d0
[ 798.049569] [<c0160bad>] filp_close+0x4d/0x80
[ 798.049578] [<c011ebc4>] put_files_struct+0x74/0xb0
[ 798.049589] [<c011f945>] do_exit+0x125/0x440
[ 798.049601] [<c011fcdc>] do_group_exit+0x3c/0xb0
[ 798.049610] [<c0129643>] get_signal_to_deliver+0x243/0x350
[ 798.049622] [<c010311f>] do_signal+0x8f/0x120
[ 798.049642] [<c016c567>] sys_lstat64+0x37/0x40
[ 798.049665] [<c01031e7>] do_notify_resume+0x37/0x3c
[ 798.049672] [<c01033a6>] work_notifysig+0x13/0x19
[ 798.049686] bash S C0335160 6900 1587 1424 1548 (NOTLB)
[ 798.049715] d51b7e88 d51a2ab0 c03ad5a0 c0335160 b314fa96 00029b5e de41fbe0 dae8a050
[ 798.049727] dae8a050 dfc68ab0 00000724 d7adc60a 000000a6 d51a2ab0 d51a2bd8 7fffffff
[ 798.049740] d098f290 7fffffff d098f284 c02d0fc9 c0101a93 dae8a210 d51a2ab0 d098f3e4
[ 798.049752] Call Trace:
[ 798.049765] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 798.049772] [<c0101a93>] __switch_to+0x23/0x220
[ 798.049780] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 798.049789] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.049797] [<c02376d3>] read_chan+0x513/0x610
[ 798.049810] [<c0119590>] default_wake_function+0x0/0x20
[ 798.049818] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 798.049827] [<c0119590>] default_wake_function+0x0/0x20
[ 798.049836] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 798.049844] [<c0231ff1>] tty_read+0xe1/0xf0
[ 798.049855] [<c016150e>] vfs_read+0xae/0x180
[ 798.049866] [<c01618c1>] sys_read+0x51/0x80
[ 798.049877] [<c0103315>] syscall_call+0x7/0xb
[ 798.049892]
[ 798.049893] Showing all blocking locks in the system:
[ 798.049898] S init: 1 [dffc9a90, 116] (not blocked on mutex)
[ 798.049906] R ksoftirqd/0: 2 [dffc9560, 134] (not blocked on mutex)
[ 798.049913] S watchdog/0: 3 [dffc9030, 0] (not blocked on mutex)
[ 798.049920] R events/0: 4 [dfc68ab0, 120] (not blocked on mutex)
[ 798.049927] S khelper: 5 [dfc68580, 110] (not blocked on mutex)
[ 798.049934] S kthread: 6 [dfc68050, 111] (not blocked on mutex)
[ 798.049940] S kblockd/0: 8 [dfc77a90, 110] (not blocked on mutex)
[ 798.049947] S kacpid: 9 [dfc77560, 120] (not blocked on mutex)
[ 798.049954] S pdflush: 101 [dfcd6/0x40
[ 809.051284] [<c02cec3d>] unix_stream_recvmsg+0x43d/0x4c0
[ 809.051302] [<c02d14ef>] __mutex_lock_slowpath+0x27f/0x480
[ 809.051312] [<c02798f1>] do_sock_read+0xa1/0xb0
[ 809.051322] [<c0279a95>] sock_aio_read+0x95/0xa0
[ 809.051342] [<c0161411>] do_sync_read+0xc1/0x110
[ 809.051352] [<c01347bd>] ktime_get+0x1d/0x50
[ 809.051370] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 809.051379] [<c01e758b>] _atomic_dec_and_lock+0x3b/0x40
[ 809.051388] [<c017fb13>] mntput_no_expire+0x23/0x90
[ 809.051399] [<c0162729>] __fput+0x179/0x1d0
[ 809.051409] [<c01615c4>] vfs_read+0x164/0x180
[ 809.051419] [<c01618c1>] sys_read+0x51/0x80
[ 809.051430] [<c0103315>] syscall_call+0x7/0xb
[ 809.051444] cat D E09F082A 6152 1429 1 1578 (L-TLB)
[ 809.051471] d95e5cd4 d90cd030 c03ad5a0 e09f082a 00000001 00000001 00000000 df1b34f8
[ 809.051482] c14db58c dfc68ab0 000ed1be d51c4596 000000b4 d90cd030 d90cd158 00000c51
[ 809.051494] c14db554 d95e5d18 c14db58c c012da3a 00200096 c02d2642 c0327d60 fffffdff
[ 809.051507] Call Trace:
[ 809.051511] [<e09f082a>] drm_vbl_send_signals+0x2a/0xba [drm]
[ 809.051560] [<c012da3a>] flush_cpu_workqueue+0x9a/0x1c0
[ 809.051568] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 809.051577] [<c02d2845>] _spin_unlock+0x15/0x30
[ 809.051584] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 809.051595] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 809.051606] [<c012db88>] flush_workqueue+0x28/0x30
[ 809.051614] [<c0233052>] release_dev+0x4d2/0x7b0
[ 809.051627] [<c02d2845>] _spin_unlock+0x15/0x30
[ 809.051634] [<c014cfee>] zap_pte_range+0xae/0x230
[ 809.051643] [<c015de5c>] free_block+0xec/0x180
[ 809.051651] [<c01ec310>] memmove+0x50/0x54
[ 809.051663] [<c015bf06>] poison_obj+0x36/0x60
[ 809.051673] [<c02d2845>] _spin_unlock+0x15/0x30
[ 809.051681] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 809.051689] [<c0233860>] tty_release+0x0/0x20
[ 809.051695] [<c0233874>] tty_release+0x14/0x20
[ 809.051701] [<c0162763>] __fput+0x1b3/0x1d0
[ 809.051713] [<c0160bad>] filp_close+0x4d/0x80
[ 809.051723] [<c011ebc4>] put_files_struct+0x74/0xb0
[ 809.051734] [<c011f945>] do_exit+0x125/0x440
[ 809.051745] [<c011fcdc>] do_group_exit+0x3c/0xb0
[ 809.051754] [<c0129643>] get_signal_to_deliver+0x243/0x350
[ 809.051767] [<c010311f>] do_signal+0x8f/0x120
[ 809.051779] [<c01ec72c>] copy_to_user+0x6c/0x90
[ 809.051788] [<c022fb09>] extract_entropy_user+0x89/0xf0
[ 809.051807] [<c02d27eb>] _spin_lock+0x1b/0x30
[ 809.051818] [<c0161577>] vfs_read+0x117/0x180
[ 809.051829] [<c01618c1>] sys_read+0x51/0x80
[ 809.051838] [<c01031e7>] do_notify_resume+0x37/0x3c
[ 809.051845] [<c01033a6>] work_notifysig+0x13/0x19
[ 809.051860] bash S C0335160 6900 1459 1424 1467 1425 (NOTLB)
[ 809.051889] d975be88 da53ea90 c03ad5a0 c0335160 1ee55e6c 0002c36b de41fbe0 dae8a050
[ 809.051902] dae8a050 dae8a050 00000512 dac7e1b3 000000b0 da53ea90 da53ebb8 7fffffff
[ 809.051914] d97bcb64 7fffffff d97bcb58 c02d0fc9 dae8a050 00200046 00000001 d97bccb8
[ 809.051926] Call Trace:
[ 809.051938] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 809.051947] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 809.051956] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.051964] [<c02376d3>] read_chan+0x513/0x610
[ 809.051972] [<c01196a7>] __wake_up_locked+0x27/0x30
[ 809.051983] [<c0119590>] default_wake_function+0x0/0x20
[ 809.051992] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.052000] [<c0119590>] default_wake_function+0x0/0x20
[ 809.052009] [<c02d2bf6>] .text.lock.kernel_lock+0x2b/0x3a
[ 809.052018] [<c0231ff1>] tty_read+0xe1/0xf0
[ 809.052029] [<c016150e>] vfs_read+0xae/0x180
[ 809.052040] [<c01618c1>] sys_read+0x51/0x80
[ 809.052050] [<c0103315>] syscall_call+0x7/0xb
[ 809.052065] bash S C0335160 7016 1467 1424 1548 1459 (NOTLB)
[ 809.052094] d7c29e88 d9819580 c03ad5a0 c0335160 11de9c18 0000bef1 de41fbe0 dae8a050
[ 809.052106] dae8a050 d9819ab0 00000713 bc460012 0000002f d9819580 d98196a8 7fffffff
[ 809.052118] d97bc358 7fffffff d97bc34c c02d0fc9 c0101a93 dae8a210 d9819580 d97bc4ac
[ 809.052130] Call Trace:
[ 809.052143] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 809.052149] [<c0101a93>] __switch_to+0x23/0x220
[ 809.052158] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 809.052166] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.052175] [<c02376d3>] read_chan+0x513/0x610
[ 809.052187] [<c0119590>] default_wake_function+0x0/0x20
[ 809.052195] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.052204] [<c0119590>] default_wake_function+0x0/0x20
[ 809.052212] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 809.052221] [<c0231ff1>] tty_read+0xe1/0xf0
[ 809.052232] [<c016150e>] vfs_read+0xae/0x180
[ 809.052242] [<c01618c1>] sys_read+0x51/0x80
[ 809.052253] [<c0103315>] syscall_call+0x7/0xb
[ 809.052267] pppd S 00000032 6408 1478 1 1544 1424 (NOTLB)
[ 809.052294] d7965eac dfcdbab0 c03ad5e0 00000032 000000d0 da53e560 00000044 0beb2830
[ 809.052306] 00000032 dfcdbab0 0000758f 0beb977c 00000032 da53e560 da53e688 7fffffff
[ 809.052318] 00000000 0000000a 00000000 c02d0fc9 c02d2642 de469af4 d72a2028 de469af4
[ 809.052329] Call Trace:
[ 809.052342] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 809.052349] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 809.052358] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.052366] [<e0a7c383>] ppp_poll+0x33/0x90 [ppp_generic]
[ 809.052386] [<c0176397>] do_select+0x197/0x300
[ 809.052402] [<c0176030>] __pollwait+0x0/0xd0
[ 809.052412] [<c017680c>] sys_select+0x2cc/0x4b0
[ 809.052420] [<c02d2916>] _spin_unlock_irq+0x16/0x30
[ 809.052435] [<c0103315>] syscall_call+0x7/0xb
[ 809.052450] gconfd-2 S 00200296 5988 1544 1 1578 1478 (NOTLB)
[ 809.052475] d755bf08 d7a86a90 c03ad5a0 00200296 c02d2642 c03b2ba0 c03b2ba0 d755bf1c
[ 809.052487] 00005fc9 dfc68ab0 00026afe 2ad9b5a7 000000b9 d7a86a90 d7a86bb8 d755bf1c
[ 809.052499] 0007bc46 d755bf60 00005fc9 c02d0f77 d755bf1c 0007bc46 d665a7e0 c03b3598
[ 809.052511] Call Trace:
[ 809.052516] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 809.052530] [<c02d0f77>] schedule_timeout+0x57/0xb0
[ 809.052540] [<c0126970>] process_timeout+0x0/0x10
[ 809.052550] [<c0176b38>] do_poll+0xa8/0xd0
[ 809.052561] [<c0176ce1>] sys_poll+0x181/0x270
[ 809.052571] [<c01216bc>] sys_gettimeofday+0x3c/0x90
[ 809.052579] [<c0176030>] __pollwait+0x0/0xd0
[ 809.052588] [<c0103315>] syscall_call+0x7/0xb
[ 809.052602] bash S C0335160 7028 1548 1424 1587 1467 (NOTLB)
[ 809.052631] d7953e88 da53e030 c03ad5a0 c0335160 e586c5f4 0002c0c0 de41fbe0 dae8a050
[ 809.052644] dae8a050 d4339ab0 000004f0 303a0c42 000000b0 da53e030 da53e158 7fffffff
[ 809.052656] d63653d0 7fffffff d63653c4 c02d0fc9 c0101a93 dae8a210 da53e030 d6365524
[ 809.052668] Call Trace:
[ 809.052680] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 809.052687] [<c0101a93>] __switch_to+0x23/0x220
[ 809.052695] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 809.052704] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.052712] [<c02376d3>] read_chan+0x513/0x610
[ 809.052725] [<c0119590>] default_wake_function+0x0/0x20
[ 809.052733] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.052742] [<c0119590>] default_wake_function+0x0/0x20
[ 809.052750] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 809.052759] [<c0231ff1>] tty_read+0xe1/0xf0
[ 809.052769] [<c016150e>] vfs_read+0xae/0x180
[ 809.052780] [<c01618c1>] sys_read+0x51/0x80
[ 809.052791] [<c0103315>] syscall_call+0x7/0xb
[ 809.052805] find D D2069D04 6228 1578 1 1429 1544 (L-TLB)
[ 809.052832] d2069cd4 d4339ab0 c03ad5a0 d2069d04 00000000 d2069d0c d2069cac c02d0ece
[ 809.052844] c14db58c dfc68ab0 00007715 f7a85996 000000b2 d4339ab0 d4339bd8 00000c51
[ 809.052856] c14db554 d2069d18 c14db58c c012da3a 00000002 c1402400 cf2ad11c 00000002
[ 809.052868] Call Trace:
[ 809.052874] [<c02d0ece>] io_schedule+0xe/0x20
[ 809.052887] [<c012da3a>] flush_cpu_workqueue+0x9a/0x1c0
[ 809.052897] [<c0131ca0>] wake_bit_function+0x0/0x60
[ 809.052905] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 809.052915] [<c0131c40>] autoremove_wake_function+0x0/0x60
[ 809.052927] [<c012db88>] flush_workqueue+0x28/0x30
[ 809.052934] [<c0233052>] release_dev+0x4d2/0x7b0
[ 809.052946] [<c015de5c>] free_block+0xec/0x180
[ 809.052954] [<c01ec310>] memmove+0x50/0x54
[ 809.052963] [<c0144fba>] free_hot_cold_page+0x11a/0x170
[ 809.052973] [<c015bf06>] poison_obj+0x36/0x60
[ 809.052982] [<c015d71d>] cache_free_debugcheck+0x11d/0x250
[ 809.052991] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 809.052999] [<c0233860>] tty_release+0x0/0x20
[ 809.053005] [<c0233874>] tty_release+0x14/0x20
[ 809.053011] [<c0162763>] __fput+0x1b3/0x1d0
[ 809.053023] [<c0160bad>] filp_close+0x4d/0x80
[ 809.053033] [<c011ebc4>] put_files_struct+0x74/0xb0
[ 809.053043] [<c011f945>] do_exit+0x125/0x440
[ 809.053055] [<c011fcdc>] do_group_exit+0x3c/0xb0
[ 809.053064] [<c0129643>] get_signal_to_deliver+0x243/0x350
[ 809.053076] [<c010311f>] do_signal+0x8f/0x120
[ 809.053095] [<c016c567>] sys_lstat64+0x37/0x40
[ 809.053119] [<c01031e7>] do_notify_resume+0x37/0x3c
[ 809.053126] [<c01033a6>] work_notifysig+0x13/0x19
[ 809.053140] bash S C0335160 6900 1587 1424 1548 (NOTLB)
[ 809.053168] d51b7e88 d51a2ab0 c03ad5a0 c0335160 b314fa96 00029b5e de41fbe0 dae8a050
[ 809.053181] dae8a050 dfc68ab0 00000724 d7adc60a 000000a6 d51a2ab0 d51a2bd8 7fffffff
[ 809.053193] d098f290 7fffffff d098f284 c02d0fc9 c0101a93 dae8a210 d51a2ab0 d098f3e4
[ 809.053205] Call Trace:
[ 809.053217] [<c02d0fc9>] schedule_timeout+0xa9/0xb0
[ 809.053224] [<c0101a93>] __switch_to+0x23/0x220
[ 809.053232] [<c02d2642>] _spin_lock_irqsave+0x22/0x30
[ 809.053241] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.053249] [<c02376d3>] read_chan+0x513/0x610
[ 809.053261] [<c0119590>] default_wake_function+0x0/0x20
[ 809.053270] [<c02d28dd>] _spin_unlock_irqrestore+0x1d/0x40
[ 809.053279] [<c0119590>] default_wake_function+0x0/0x20
[ 809.053287] [<c02d2b7f>] lock_kernel+0x2f/0x50
[ 809.053296] [<c0231ff1>] tty_read+0xe1/0xf0
[ 809.053307] [<c016150e>] vfs_read+0xae/0x180
[ 809.053317] [<c01618c1>] sys_read+0x51/0x80
[ 809.053328] [<c0103315>] syscall_call+0x7/0xb
[ 809.053342] syslogd R running 7420 1736 1243 1737 (NOTLB)
[ 809.053372] syslogd R running 7200 1737 1243 1736 (NOTLB)
[ 809.053401]
[ 809.053403] Showing all blocking locks in the system:
[ 809.053407] S init: 1 [dffc9a90, 116] (not blocked on mutex)
[ 809.053415] R ksoftirqd/0: 2 [dffc9560, 134] (not blocked on mutex)
[ 809.053422] S watchdog/0: 3 [dffc9030, 0] (not blocked on mutex)
[ 809.053429] R events/0: 4 [dfc68ab0, 120] (not blocked on mutex)
[ 809.053436] S khelper: 5 [dfc68580, 110] (not blocked on mutex)
[ 809.053442] S kthread: 6 [dfc68050, 111] (not blocked on mutex)
[ 809.053449] S kblockd/0: 8 [dfc77a90, 110] (not blocked on mutex)
[ 809.053455] S kacpid: 9 [dfc77560, 120] (not blocked on mutex)
[ 809.053462] S pdflush: 101 [dfcd6ab0, 120] (not blocked on mutex)
[ 809.053468] S pdflush: 102 [dfcd9560, 115] (not blocked on mutex)
[ 809.053475] S aio/0: 104 [dfc77030, 112] (not blocked on mutex)
[ 809.053482] S kswapd0: 103 [dfcdb580, 125] (not blocked on mutex)
[ 809.053488] S kseriod: 689 [dfcdfa90, 110] (not blocked on mutex)
[ 809.053495] S kjournald: 753 [c16b3580, 115] (not blocked on mutex)
[ 809.053501] S khubd: 936 [c169d030, 110] (not blocked on mutex)
[ 809.053508] S kjournald: 1018 [c1680580, 115] (not blocked on mutex)
[ 809.053514] S kjournald: 1019 [dfcdf560, 119] (not blocked on mutex)
[ 809.053521] S kjournald: 1020 [dfcd6050, 115] (not blocked on mutex)
[ 809.053528] S reiserfs/0: 1024 [dfcd6580, 110] (not blocked on mutex)
[ 809.053534] R syslogd: 1243 [dfcdbab0, 125] (not blocked on mutex)
[ 809.053541] S klogd: 1246 [de404ab0, 116] (not blocked on mutex)
[ 809.053548] S acpid: 1277 [c169da90, 121] (not blocked on mutex)
[ 809.053554] S cupsd: 1283 [c16b3ab0, 116] (not blocked on mutex)
[ 809.053561] S dbus-daemon-1: 1286 [dfcd9a90, 118] (not blocked on mutex)
[ 809.053568] S gpm: 1291 [de42b030, 115] (not blocked on mutex)
[ 809.053574] S inetd: 1296 [dfcdf030, 119] (not blocked on mutex)
[ 809.053581] S pdnsd: 1324 [dfcd9030, 118] (not blocked on mutex)
[ 809.053588] S pdnsd: 1327 [de404580, 115] (not blocked on mutex)
[ 809.053594] S pdnsd: 1328 [c169d560, 116] (not blocked on mutex)
[ 809.053601] S sshd: 1334 [de42ba90, 118] (not blocked on mutex)
[ 809.053607] S xinit: 1340 [de404050, 117] (not blocked on mutex)
[ 809.053614] S getty: 1346 [c16b3050, 117] (not blocked on mutex)
[ 809.053620] S getty: 1347 [dfcdb050, 117] (not blocked on mutex)
[ 809.053627] S getty: 1348 [c1680050, 117] (not blocked on mutex)
[ 809.053634] S getty: 1349 [c1680ab0, 117] (not blocked on mutex)
[ 809.053640] S getty: 1350 [de42b560, 117] (not blocked on mutex)
[ 809.053647] S getty: 1353 [de203030, 117] (not blocked on mutex)
[ 809.053654] R XFree86: 1373 [dd4f9580, 105] (not blocked on mutex)
[ 809.053660] S x-session-manag: 1378 [de203a90, 115] (not blocked on mutex)
[ 809.053667] S ssh-agent: 1407 [dd4f9050, 115] (not blocked on mutex)
[ 809.053673] S dbus-daemon-1: 1411 [dc211560, 115] (not blocked on mutex)
[ 809.053680] S xfce-mcs-manage: 1413 [dc211a90, 115] (not blocked on mutex)
[ 809.053687] S xfwm4: 1416 [de203560, 115] (not blocked on mutex)
[ 809.053693] S xftaskbar4: 1418 [dc211030, 115] (not blocked on mutex)
[ 809.053699] S xfdesktop: 1420 [dae8aab0, 115] (not blocked on mutex)
[ 809.053706] S xfce4-panel: 1422 [dae8a580, 115] (not blocked on mutex)
[ 809.053713] R Terminal: 1424 [dae8a050, 116] (not blocked on mutex)
[ 809.053719] S gnome-pty-helpe: 1425 [dd4f9ab0, 116] (not blocked on mutex)
[ 809.053725] D cat: 1429 [d90cd030, 125] (not blocked on mutex)
[ 809.053732] S bash: 1459 [da53ea90, 116] (not blocked on mutex)
[ 809.053738] S bash: 1467 [d9819580, 117] (not blocked on mutex)
[ 809.053744] S pppd: 1478 [da53e560, 115] (not blocked on mutex)
[ 809.053751] S gconfd-2: 1544 [d7a86a90, 116] (not blocked on mutex)
[ 809.053757] S bash: 1548 [da53e030, 117] (not blocked on mutex)
[ 809.053763] D find: 1578 [d4339ab0, 118] (not blocked on mutex)
[ 809.053770] S bash: 1587 [d51a2ab0, 117] (not blocked on mutex)
[ 809.053776] R syslogd: 1736 [d90cda90, 125] (not blocked on mutex)
[ 809.053782] R syslogd: 1737 [d4339580, 125] (not blocked on mutex)
[ 809.053788]
[ 809.053791] ---------------------------
[ 809.053794] | showing all locks held: |
[ 809.053797] ---------------------------
[ 809.053800]
[ 809.053802] =============================================
[ 809.053805]
[ 829.585023] kobject_uevent
[ 829.585055] fill_kobj_path: path = '/class/vc/vcs2'
[ 829.585461] kobject vcs2: cleaning up
[ 829.585476] kobject_uevent
[ 829.585534] fill_kobj_path: path = '/class/vc/vcsa2'
[ 829.585745] kobject vcsa2: cleaning up
[ 829.586219] kobject_uevent
[ 829.586237] fill_kobj_path: path = '/class/vc/vcs3'
[ 829.586526] kobject vcs3: cleaning up
[ 829.586537] kobject_uevent
[ 829.586551] fill_kobj_path: path = '/class/vc/vcsa3'
[ 829.586752] kobject vcsa3: cleaning up
[ 829.588061] kobject_uevent
[ 829.588083] fill_kobj_path: path = '/class/vc/vcs4'
[ 829.588368] kobject vcs4: cleaning up
[ 829.588379] kobject_uevent
[ 829.588636] fill_kobj_path: path = '/class/vc/vcsa4'
[ 829.589333] kobject vcsa4: cleaning up
[ 829.589572] kobject_uevent
[ 829.589592] fill_kobj_path: path = '/class/vc/vcs6'
[ 829.590314] kobject vcs6: cleaning up
[ 829.590331] kobject_uevent
[ 829.590346] fill_kobj_path: path = '/class/vc/vcsa6'
[ 829.590902] kobject vcsa6: cleaning up
[ 829.591096] kobject_uevent
[ 829.591111] fill_kobj_path: path = '/class/vc/vcs5'
[ 829.601916] kobject vcs5: cleaning up
[ 829.601942] kobject_uevent
[ 829.601959] fill_kobj_path: path = '/class/vc/vcsa5'
[ 829.602863] kobject vcsa5: cleaning up
[ 829.654967] kobject_uevent
[ 829.655006] fill_kobj_path: path = '/class/vc/vcs7'
[ 829.655370] kobject vcs7: cleaning up
[ 829.655385] kobject_uevent
[ 829.655399] fill_kobj_path: path = '/class/vc/vcsa7'
[ 829.655639] kobject vcsa7: cleaning up
[ 844.591519] kobject_uevent
[ 844.591556] fill_kobj_path: path = '/class/vc/vcs1'
[ 844.591933] kobject vcs1: cleaning up
[ 844.591948] kobject_uevent
[ 844.591960] fill_kobj_path: path = '/class/vc/vcsa1'
[ 844.592178] kobject vcsa1: cleaning up
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 35072 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version:
# Thu Jan 12 15:20:08 2006
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION="-home"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_DOUBLEFAULT=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_HUB6 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_VIRTUAL=m
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_VM=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic
2006-01-12 14:58 linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic Alexander E. Patrakov
@ 2006-01-12 15:59 ` Dmitry Torokhov
2006-01-12 16:06 ` Alexander E. Patrakov
2006-01-13 6:32 ` Alexander E. Patrakov
2006-01-13 6:43 ` Andrew Morton
2 siblings, 1 reply; 8+ messages in thread
From: Dmitry Torokhov @ 2006-01-12 15:59 UTC (permalink / raw)
To: Alexander E. Patrakov; +Cc: LKML, Alan Cox
On 1/12/06, Alexander E. Patrakov <patrakov@ums.usu.ru> wrote:
> Hello,
>
> the main linux tree started suffering the same bug as described for -mm
> earlier in http://lkml.org/lkml/2005/11/7/147:
>
> if I put load on my system, connect to the Internet using my cellphone
> (/dev/ttyS0) and do something, it stops reacting to PS/2 keyboard
> events, but still understands PS/2 mouse. The PPP load monitor shows
> huge transfer rate (several megabytes per second) consisting of the
> infinitely replicated several last packets. events/0 consumes all the
> CPU. tty buffering revamping patch is the obvious candidate, but I
> haven't tried to revert it yet.
>
Do you have access to an USB keyboard?
--
Dmitry
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic
2006-01-12 15:59 ` Dmitry Torokhov
@ 2006-01-12 16:06 ` Alexander E. Patrakov
0 siblings, 0 replies; 8+ messages in thread
From: Alexander E. Patrakov @ 2006-01-12 16:06 UTC (permalink / raw)
To: dtor_core; +Cc: LKML, Alan Cox
Dmitry Torokhov wrote:
>Do you have access to an USB keyboard?
>
>
No
--
Alexander E. Patrakov
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic
2006-01-12 14:58 linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic Alexander E. Patrakov
2006-01-12 15:59 ` Dmitry Torokhov
@ 2006-01-13 6:32 ` Alexander E. Patrakov
2006-01-13 6:43 ` Andrew Morton
2 siblings, 0 replies; 8+ messages in thread
From: Alexander E. Patrakov @ 2006-01-13 6:32 UTC (permalink / raw)
To: LKML; +Cc: Alan Cox, dmitry.torokhov
Alexander E. Patrakov wrote:
> Hello,
>
> the main linux tree started suffering the same bug as described for -mm
> earlier in http://lkml.org/lkml/2005/11/7/147:
>
> if I put load on my system, connect to the Internet using my cellphone
> (/dev/ttyS0) and do something, it stops reacting to PS/2 keyboard
> events, but still understands PS/2 mouse. The PPP load monitor shows
> huge transfer rate (several megabytes per second) consisting of the
> infinitely replicated several last packets. events/0 consumes all the
> CPU. tty buffering revamping patch is the obvious candidate, but I
> haven't tried to revert it yet.
As an experiment, I applied all tty layer buffering revamping patched
from 2.6.15-mm2 to the vanilla 2.6.15. There were two rejects in drivers
that I don't even compile, I ignored them. The bug indeed manifested
itself. There is no such bug in vanilla 2.6.15 kernel.
So please, remove these broken patches from mainline and give me some
instructions how to debug this in -mm.
--
Alexander E. Patrakov
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic
2006-01-12 14:58 linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic Alexander E. Patrakov
2006-01-12 15:59 ` Dmitry Torokhov
2006-01-13 6:32 ` Alexander E. Patrakov
@ 2006-01-13 6:43 ` Andrew Morton
2006-01-13 11:10 ` Alan Cox
2 siblings, 1 reply; 8+ messages in thread
From: Andrew Morton @ 2006-01-13 6:43 UTC (permalink / raw)
To: Alexander E. Patrakov; +Cc: linux-kernel, alan
"Alexander E. Patrakov" <patrakov@ums.usu.ru> wrote:
>
> the main linux tree started suffering the same bug as described for -mm
> earlier in http://lkml.org/lkml/2005/11/7/147:
>
> if I put load on my system, connect to the Internet using my cellphone
> (/dev/ttyS0) and do something, it stops reacting to PS/2 keyboard
> events, but still understands PS/2 mouse. The PPP load monitor shows
> huge transfer rate (several megabytes per second) consisting of the
> infinitely replicated several last packets. events/0 consumes all the
> CPU. tty buffering revamping patch is the obvious candidate, but I
> haven't tried to revert it yet.
Darn, I hadn't thought of that. Yes tty-revamp might be the culprit.
Which serial driver are you using? Just 8250?
For you convenience,
http://www.zip.com.au/~akpm/linux/patches/stuff/2615mm2-no-tty-revamp.bz2
is 2.6.15-mm2 with just the tty-revamp and isicom patches reverted.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic
2006-01-13 6:43 ` Andrew Morton
@ 2006-01-13 11:10 ` Alan Cox
[not found] ` <20060113030850.7ff5a505.akpm@osdl.org>
0 siblings, 1 reply; 8+ messages in thread
From: Alan Cox @ 2006-01-13 11:10 UTC (permalink / raw)
To: Andrew Morton; +Cc: Alexander E. Patrakov, linux-kernel
On Iau, 2006-01-12 at 22:43 -0800, Andrew Morton wrote:
> > infinitely replicated several last packets. events/0 consumes all the
> > CPU. tty buffering revamping patch is the obvious candidate, but I
> > haven't tried to revert it yet.
>
> Darn, I hadn't thought of that. Yes tty-revamp might be the culprit.
That sounds like the bug that Paul fixed.
Alan
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic
[not found] ` <20060113030850.7ff5a505.akpm@osdl.org>
@ 2006-01-13 11:31 ` Alexander E. Patrakov
2006-01-13 14:23 ` Alexander E. Patrakov
1 sibling, 0 replies; 8+ messages in thread
From: Alexander E. Patrakov @ 2006-01-13 11:31 UTC (permalink / raw)
To: Andrew Morton; +Cc: LKML
Andrew Morton wrote:
>That means "please test 2.6.15-git10" ;)
>
>
Sure, when it is out. The 2.6.15-mm2 kernel without tty-revamp is now
compiling.
--
Alexander E. Patrakov
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic
[not found] ` <20060113030850.7ff5a505.akpm@osdl.org>
2006-01-13 11:31 ` Alexander E. Patrakov
@ 2006-01-13 14:23 ` Alexander E. Patrakov
1 sibling, 0 replies; 8+ messages in thread
From: Alexander E. Patrakov @ 2006-01-13 14:23 UTC (permalink / raw)
To: LKML; +Cc: Andrew Morton, Alan Cox, dmitry.torokhov
Andrew Morton wrote:
>Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
>
>
>>On Iau, 2006-01-12 at 22:43 -0800, Andrew Morton wrote:
>>
>>
>>>> infinitely replicated several last packets. events/0 consumes all the
>>>> CPU. tty buffering revamping patch is the obvious candidate, but I
>>>> haven't tried to revert it yet.
>>>>
>>>>
>>>Darn, I hadn't thought of that. Yes tty-revamp might be the culprit.
>>>
>>>
>>That sounds like the bug that Paul fixed.
>>
>>
>>
>
>That means "please test 2.6.15-git10" ;)
>
>
Paul's fix is actually in 2.6.15-git9. This version seems to work
(downloaded 20x more data than usually required to trigger the bug).
Thanks.
--
Alexander E. Patrakov
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2006-01-13 14:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-01-12 14:58 linux-2.6.15-git7: PS/2 keyboard dies on ppp traffic Alexander E. Patrakov
2006-01-12 15:59 ` Dmitry Torokhov
2006-01-12 16:06 ` Alexander E. Patrakov
2006-01-13 6:32 ` Alexander E. Patrakov
2006-01-13 6:43 ` Andrew Morton
2006-01-13 11:10 ` Alan Cox
[not found] ` <20060113030850.7ff5a505.akpm@osdl.org>
2006-01-13 11:31 ` Alexander E. Patrakov
2006-01-13 14:23 ` Alexander E. Patrakov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).