* libertas ub8xxx - bcdDevice 30.06 - firmware issues?
@ 2007-11-17 1:26 Luis R. Rodriguez
2007-11-19 17:10 ` Dan Williams
0 siblings, 1 reply; 2+ messages in thread
From: Luis R. Rodriguez @ 2007-11-17 1:26 UTC (permalink / raw)
To: libertas-dev; +Cc: Stefano Brivio, linux kernel
I have a USB libertas 1286:2001 with bcdDevice 30.06 (from lsusb -v).
I tried downloading the firmware from marvell:
https://www.marvell.com/drivers/driverDisplay.do?dId=160&pId=38
renaming and to usb8388.bin and putting it in firmware dir. Is this
the right firmware??
Upon load this is what I get:
17:58 < mcgrof> usb8xxx: URB in failure status: -71
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
and address 3
17:58 < mcgrof> usb8xxx: probe of 4-1:1.0 failed with error -12
17:58 < mcgrof> usbcore: registered new interface driver usb8xxx
I'm using the compatibility package from:
http://linuxwireless.org/en/users/Download
on 2.6.22. So this driver reflects what's on
wireless2.6.git#everything. I tried looking on the wiki but well can't
find much information. Can we please start adding some info about this
driver to:
http://linuxwireless.org/en/users/Drivers/libertas
Luis
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: libertas ub8xxx - bcdDevice 30.06 - firmware issues?
2007-11-17 1:26 libertas ub8xxx - bcdDevice 30.06 - firmware issues? Luis R. Rodriguez
@ 2007-11-19 17:10 ` Dan Williams
0 siblings, 0 replies; 2+ messages in thread
From: Dan Williams @ 2007-11-19 17:10 UTC (permalink / raw)
To: Luis R. Rodriguez; +Cc: libertas-dev, linux kernel, Stefano Brivio
On Fri, 2007-11-16 at 20:26 -0500, Luis R. Rodriguez wrote:
> I have a USB libertas 1286:2001 with bcdDevice 30.06 (from lsusb -v).
> I tried downloading the firmware from marvell:
>
> https://www.marvell.com/drivers/driverDisplay.do?dId=160&pId=38
>
> renaming and to usb8388.bin and putting it in firmware dir. Is this
> the right firmware??
Yikes; really old. You might want to try:
http://dev.laptop.org/pub/firmware/libertas/
Dan
> Upon load this is what I get:
>
> 17:58 < mcgrof> usb8xxx: URB in failure status: -71
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb 4-1: reset high speed USB device using ehci_hcd
> and address 3
> 17:58 < mcgrof> usb8xxx: probe of 4-1:1.0 failed with error -12
> 17:58 < mcgrof> usbcore: registered new interface driver usb8xxx
>
> I'm using the compatibility package from:
>
> http://linuxwireless.org/en/users/Download
>
> on 2.6.22. So this driver reflects what's on
> wireless2.6.git#everything. I tried looking on the wiki but well can't
> find much information. Can we please start adding some info about this
> driver to:
>
> http://linuxwireless.org/en/users/Drivers/libertas
>
> Luis
>
> _______________________________________________
> libertas-dev mailing list
> libertas-dev@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/libertas-dev
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-11-19 17:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-11-17 1:26 libertas ub8xxx - bcdDevice 30.06 - firmware issues? Luis R. Rodriguez
2007-11-19 17:10 ` Dan Williams
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).