[PATCH 0/6] Add interconnect support for GENI QUPs

[PATCH 0/6] Add interconnect support for GENI QUPs

[Alok Chauhan]

This patch series contains following:
* Add wrapper framework to support interconnect path from GENI QUPs.
  This wrapper enabled and help individual SEs to put their BW request.
  Adding this wrapper make sense because we don't want individual SEs
  to request to interconnect driver separately and put individual bw
  votes from QUP.

  This wrapper framework does the following:
  - Request for interconnect path handle
  - Maintain record of individual SEs' avg/peak bw.
  - Aggregated avg/peak bw based on how many SE's are active and put
    single bw request from QUP

* Interconnect wrapper API calling from I2C, SPI & Uart driver
* dt binding in sdm845 soc for Interconnect path for GENI QUPs
* dt binding documentation


Alok Chauhan (6):
  dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
  soc: qcom: Add wrapper to support for Interconnect path
  i2c: i2c-qcom-geni: Add interconnect support
  spi: spi-geni-qcom: Add interconnect support
  tty: serial: qcom_geni_serial: Add interconnect support
  arm64: dts: sdm845: Add interconnect for GENI QUP

 .../devicetree/bindings/soc/qcom/qcom,geni-se.txt  |  10 ++
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |  14 +++
 drivers/i2c/busses/i2c-qcom-geni.c                 |  13 +++
 drivers/soc/qcom/qcom-geni-se.c                    | 129 +++++++++++++++++++++
 drivers/spi/spi-geni-qcom.c                        |  20 +++-
 drivers/tty/serial/qcom_geni_serial.c              |  27 ++++-
 include/linux/qcom-geni-se.h                       |  11 ++
 7 files changed, 222 insertions(+), 2 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP

[Alok Chauhan]

Add documentation for the interconnect and interconnect-names bindings
for the GENI QUP as detailed by bindings/interconnect/interconnect.txt.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index dab7ca9..44d7e02 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -17,6 +17,12 @@ Required properties if child node exists:
 - #address-cells: 	Must be <1> for Serial Engine Address
 - #size-cells: 		Must be <1> for Serial Engine Address Size
 - ranges: 		Must be present
+- interconnects:	phandle to a interconnect provider. Please refer
+			../interconnect/interconnect.txt for details.
+			Must be 2 paths corresponding to 2 AXI ports.
+- interconnect-names:	Port names to differentiate between the
+			2 interconnect paths defined with interconnect
+			specifier.
 
 Properties for children:
 
@@ -67,6 +73,10 @@ Example:
 		#size-cells = <1>;
 		ranges;
 
+		interconnects = <&qnoc 11 &qnoc 512>,
+				<&qnoc 0 &qnoc 543>;
+		interconnect-names = "qup-memory", "qup-config";
+
 		i2c0: i2c@a94000 {
 			compatible = "qcom,geni-i2c";
 			reg = <0xa94000 0x4000>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path

[Alok Chauhan]

Add the wrapper to support for interconnect path voting
from GENI QUP. This wrapper provides the functionalities
to individual Serial Engine device to get the interconnect
path and to vote for bandwidth based on their need.

This wrapper maintains bandwidth votes from each Serial Engine
and send the aggregated vote from GENI QUP to interconnect
framework.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
---
 drivers/soc/qcom/qcom-geni-se.c | 129 ++++++++++++++++++++++++++++++++++++++++
 include/linux/qcom-geni-se.h    |  11 ++++
 2 files changed, 140 insertions(+)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 6b8ef01..1d8dcb1 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -11,6 +11,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/qcom-geni-se.h>
+#include <linux/interconnect.h>
 
 /**
  * DOC: Overview
@@ -84,11 +85,21 @@
  * @dev:		Device pointer of the QUP wrapper core
  * @base:		Base address of this instance of QUP wrapper core
  * @ahb_clks:		Handle to the primary & secondary AHB clocks
+ * @icc_path:		Array of interconnect path handles
+ * @geni_wrapper_lock:	Lock to protect the bus bandwidth request
+ * @cur_avg_bw:		Current Bus Average BW request value from GENI QUP
+ * @cur_peak_bw:	Current Bus Peak BW request value from GENI QUP
+ * @peak_bw_list_head:	Sorted resource list based on peak bus BW
  */
 struct geni_wrapper {
 	struct device *dev;
 	void __iomem *base;
 	struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
+	struct icc_path *icc_path[2];
+	struct mutex geni_wrapper_lock;
+	u32 cur_avg_bw;
+	u32 cur_peak_bw;
+	struct list_head peak_bw_list_head;
 };
 
 #define QUP_HW_VER_REG			0x4
@@ -440,6 +451,71 @@ static void geni_se_clks_off(struct geni_se *se)
 }
 
 /**
+ * geni_icc_update_bw() - Request to update bw vote on an interconnect path
+ * @se:			Pointer to the concerned serial engine.
+ * @update:		Flag to update bw vote.
+ *
+ * This function is used to request set bw vote on interconnect path handle.
+ */
+void geni_icc_update_bw(struct geni_se *se, bool update)
+{
+	struct geni_se *temp = NULL;
+	struct list_head *ins_list_head;
+	struct geni_wrapper *wrapper;
+
+	mutex_lock(&se->wrapper->geni_wrapper_lock);
+
+	wrapper = se->wrapper;
+
+	if (update) {
+		wrapper->cur_avg_bw += se->avg_bw;
+		ins_list_head = &wrapper->peak_bw_list_head;
+		list_for_each_entry(temp, &wrapper->peak_bw_list_head,
+				peak_bw_list) {
+			if (temp->peak_bw < se->peak_bw)
+				break;
+			ins_list_head = &temp->peak_bw_list;
+		}
+
+		list_add(&se->peak_bw_list, ins_list_head);
+
+		if (ins_list_head == &wrapper->peak_bw_list_head)
+			wrapper->cur_peak_bw = se->peak_bw;
+	} else {
+		if (unlikely(list_empty(&se->peak_bw_list))) {
+			mutex_unlock(&wrapper->geni_wrapper_lock);
+			return;
+		}
+
+		wrapper->cur_avg_bw -= se->avg_bw;
+
+		list_del_init(&se->peak_bw_list);
+		temp = list_first_entry_or_null(&wrapper->peak_bw_list_head,
+					struct geni_se, peak_bw_list);
+		if (temp && temp->peak_bw != wrapper->cur_peak_bw)
+			wrapper->cur_peak_bw = temp->peak_bw;
+		else if (!temp && wrapper->cur_peak_bw)
+			wrapper->cur_peak_bw = 0;
+	}
+
+	/*
+	 * This bw vote is to enable internal QUP core clock as well as to
+	 * enable path towards memory.
+	 */
+	icc_set_bw(wrapper->icc_path[0], wrapper->cur_avg_bw,
+		wrapper->cur_peak_bw);
+
+	/*
+	 * This is just register configuration path so doesn't need avg bw.
+	 * Set only peak bw to enable this path.
+	 */
+	icc_set_bw(wrapper->icc_path[1], 0, wrapper->cur_peak_bw);
+
+	mutex_unlock(&wrapper->geni_wrapper_lock);
+}
+EXPORT_SYMBOL(geni_icc_update_bw);
+
+/**
  * geni_se_resources_off() - Turn off resources associated with the serial
  *                           engine
  * @se:	Pointer to the concerned serial engine.
@@ -707,6 +783,47 @@ void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len)
 }
 EXPORT_SYMBOL(geni_se_rx_dma_unprep);
 
+/**
+ * geni_interconnect_init() - Request to get interconnect path handle
+ * @se:			Pointer to the concerned serial engine.
+ *
+ * This function is used to get interconnect path handle.
+ */
+int geni_interconnect_init(struct geni_se *se)
+{
+	struct geni_wrapper *wrapper_rsc;
+
+	if (unlikely(!se || !se->wrapper))
+		return -EINVAL;
+
+	wrapper_rsc = se->wrapper;
+
+	if ((IS_ERR_OR_NULL(wrapper_rsc->icc_path[0]) ||
+		IS_ERR_OR_NULL(wrapper_rsc->icc_path[1]))) {
+
+		wrapper_rsc->icc_path[0] = of_icc_get(wrapper_rsc->dev,
+						"qup-memory");
+		if (IS_ERR(wrapper_rsc->icc_path[0]))
+			return PTR_ERR(wrapper_rsc->icc_path[0]);
+
+		wrapper_rsc->icc_path[1] = of_icc_get(wrapper_rsc->dev,
+						"qup-config");
+		if (IS_ERR(wrapper_rsc->icc_path[1])) {
+			icc_put(wrapper_rsc->icc_path[0]);
+			wrapper_rsc->icc_path[0] = NULL;
+			return PTR_ERR(wrapper_rsc->icc_path[1]);
+		}
+
+		INIT_LIST_HEAD(&wrapper_rsc->peak_bw_list_head);
+		mutex_init(&wrapper_rsc->geni_wrapper_lock);
+	}
+
+	INIT_LIST_HEAD(&se->peak_bw_list);
+
+	return 0;
+}
+EXPORT_SYMBOL(geni_interconnect_init);
+
 static int geni_se_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -737,6 +854,17 @@ static int geni_se_probe(struct platform_device *pdev)
 	return devm_of_platform_populate(dev);
 }
 
+static int geni_se_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct geni_wrapper *wrapper = dev_get_drvdata(dev);
+
+	icc_put(wrapper->icc_path[0]);
+	icc_put(wrapper->icc_path[1]);
+
+	return 0;
+}
+
 static const struct of_device_id geni_se_dt_match[] = {
 	{ .compatible = "qcom,geni-se-qup", },
 	{}
@@ -749,6 +877,7 @@ static int geni_se_probe(struct platform_device *pdev)
 		.of_match_table = geni_se_dt_match,
 	},
 	.probe = geni_se_probe,
+	.remove = geni_se_remove,
 };
 module_platform_driver(geni_se_driver);
 
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 3bcd67f..9bf03e9 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -33,6 +33,10 @@ enum geni_se_protocol_type {
  * @clk:		Handle to the core serial engine clock
  * @num_clk_levels:	Number of valid clock levels in clk_perf_tbl
  * @clk_perf_tbl:	Table of clock frequency input to serial engine clock
+ * @avg_bw:		Average bus bandwidth value for Serial Engine device
+ * @peak_bw:		Peak bus bandwidth value for Serial Engine device
+ * @peak_bw_list:	List Head of peak bus banwidth list for Serial Engine
+ *			device
  */
 struct geni_se {
 	void __iomem *base;
@@ -41,6 +45,9 @@ struct geni_se {
 	struct clk *clk;
 	unsigned int num_clk_levels;
 	unsigned long *clk_perf_tbl;
+	u32 avg_bw;
+	u32 peak_bw;
+	struct list_head peak_bw_list;
 };
 
 /* Common SE registers */
@@ -416,5 +423,9 @@ int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len,
 void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len);
 
 void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len);
+
+int geni_interconnect_init(struct geni_se *se);
+
+void geni_icc_update_bw(struct geni_se *se, bool update);
 #endif
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support

[Alok Chauhan]

Get the interconnect paths for I2C based Serial Engine device
and vote accordingly based on maximum supported I2C frequency.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index db075bc..e8fe63a 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -14,6 +14,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/qcom-geni-se.h>
 #include <linux/spinlock.h>
+#include <linux/interconnect.h>
 
 #define SE_I2C_TX_TRANS_LEN		0x26c
 #define SE_I2C_RX_TRANS_LEN		0x270
@@ -508,6 +509,15 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	/* Set the bus quota to a reasonable value */
+	gi2c->se.avg_bw = Bps_to_icc(1000);
+	gi2c->se.peak_bw = Bps_to_icc(76800000);
+	ret = geni_interconnect_init(&gi2c->se);
+	if (ret) {
+		dev_err(&pdev->dev, "interconnect_init failed %d\n", ret);
+		return ret;
+	}
+
 	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
 							&gi2c->clk_freq_out);
 	if (ret) {
@@ -611,6 +621,8 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
 		gi2c->suspended = 1;
 	}
 
+	geni_icc_update_bw(&gi2c->se, false);
+
 	return 0;
 }
 
@@ -619,6 +631,7 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
 	int ret;
 	struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
 
+	geni_icc_update_bw(&gi2c->se, true);
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret)
 		return ret;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[Alok Chauhan]

Get the interconnect paths for SPI based Serial Engine device
and vote accordingly based on maximum supported SPI frequency.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
---
 drivers/spi/spi-geni-qcom.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index fdb7cb88..7bbbe9d 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -12,6 +12,7 @@
 #include <linux/qcom-geni-se.h>
 #include <linux/spi/spi.h>
 #include <linux/spinlock.h>
+#include <linux/interconnect.h>
 
 /* SPI SE specific registers and respective register fields */
 #define SE_SPI_CPHA		0x224
@@ -589,6 +590,15 @@ static int spi_geni_probe(struct platform_device *pdev)
 	spin_lock_init(&mas->lock);
 	pm_runtime_enable(&pdev->dev);
 
+	/* Set the bus quota to a reasonable value */
+	mas->se.avg_bw = Bps_to_icc(2500);
+	mas->se.peak_bw = Bps_to_icc(200000000);
+	ret = geni_interconnect_init(&mas->se);
+	if (ret) {
+		dev_err(&pdev->dev, "interconnect_init failed %d\n", ret);
+		return ret;
+	}
+
 	ret = spi_geni_init(mas);
 	if (ret)
 		goto spi_geni_probe_runtime_disable;
@@ -628,8 +638,15 @@ static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
 {
 	struct spi_master *spi = dev_get_drvdata(dev);
 	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	int ret;
 
-	return geni_se_resources_off(&mas->se);
+	ret = geni_se_resources_off(&mas->se);
+	if (ret)
+		return ret;
+
+	geni_icc_update_bw(&mas->se, false);
+
+	return 0;
 }
 
 static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
@@ -637,6 +654,7 @@ static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
 	struct spi_master *spi = dev_get_drvdata(dev);
 	struct spi_geni_master *mas = spi_master_get_devdata(spi);
 
+	geni_icc_update_bw(&mas->se, true);
 	return geni_se_resources_on(&mas->se);
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 5/6] tty: serial: qcom_geni_serial: Add interconnect support

[Alok Chauhan]

Get the interconnect paths for Uart based Serial Engine device
and vote accordingly based on maximum supported Uart frequency.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index a72d6d9..e2ea499 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -19,6 +19,7 @@
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
+#include <linux/interconnect.h>
 
 /* UART specific GENI registers */
 #define SE_UART_LOOPBACK_CFG		0x22c
@@ -1348,6 +1349,22 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	/* Set the bus quota to a reasonable value */
+	port->se.avg_bw = console ? Bps_to_icc(1000) : Bps_to_icc(2500);
+	port->se.peak_bw = Bps_to_icc(76800000);
+	ret = geni_interconnect_init(&port->se);
+	if (ret) {
+		dev_err(&pdev->dev, "interconnect_init failed %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Vote for interconnect path early. This has to move as part of
+	 * Runtime PM APIs when implemented for better control betwen
+	 * console and non-console usecases
+	 */
+	geni_icc_update_bw(&port->se, true);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -EINVAL;
@@ -1385,8 +1402,15 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
 {
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
+	int ret;
+
+	ret = uart_suspend_port(uport->private_data, uport);
+	if (ret)
+		return ret;
+
+	geni_icc_update_bw(&port->se, false);
 
-	return uart_suspend_port(uport->private_data, uport);
+	return 0;
 }
 
 static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
@@ -1394,6 +1418,7 @@ static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
+	geni_icc_update_bw(&port->se, true);
 	return uart_resume_port(uport->private_data, uport);
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 6/6] arm64: dts: sdm845: Add interconnect for GENI QUP

[Alok Chauhan]

Add interconnect ports for GENI QUPs to set bus
capabilities.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c27cbd3..fb0a8a7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -374,6 +374,13 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+
+			interconnects = <&rsc_hlos MASTER_BLSP_1
+					&rsc_hlos SLAVE_EBI1>,
+					<&rsc_hlos MASTER_APPSS_PROC
+					&rsc_hlos SLAVE_BLSP_1>;
+			interconnect-names = "qup-memory", "qup-config";
+
 			status = "disabled";
 
 			i2c0: i2c@880000 {
@@ -682,6 +689,13 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+
+			interconnects = <&rsc_hlos MASTER_BLSP_2
+					&rsc_hlos SLAVE_EBI1>,
+					<&rsc_hlos MASTER_APPSS_PROC
+					&rsc_hlos SLAVE_BLSP_2>;
+			interconnect-names = "qup-memory", "qup-config";
+
 			status = "disabled";
 
 			i2c8: i2c@a80000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 305 bytes --]

On Mon, Jan 21, 2019 at 04:51:41PM +0530, Alok Chauhan wrote:
> Get the interconnect paths for SPI based Serial Engine device
> and vote accordingly based on maximum supported SPI frequency.

I don't have any of the other patches in this series or a cover letter -
what's going on with dependencies here?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[alokc]

On 2019-01-21 18:13, Mark Brown wrote:
> On Mon, Jan 21, 2019 at 04:51:41PM +0530, Alok Chauhan wrote:
>> Get the interconnect paths for SPI based Serial Engine device
>> and vote accordingly based on maximum supported SPI frequency.
> 
> I don't have any of the other patches in this series or a cover letter 
> -
> what's going on with dependencies here?

I am extremely sorry to waste your time. Looks like I missed some 
mailing list while sending patches upstream. I will resend patches 
today.

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,a Linux Foundation Collaborative Project

Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP

[alokc]

Please don't review this patch. I've resend patches after adding all the 
mailing list.
Sorry for inconvenience.

On 2019-01-21 16:51, Alok Chauhan wrote:
> Add documentation for the interconnect and interconnect-names bindings
> for the GENI QUP as detailed by bindings/interconnect/interconnect.txt.
> 
> Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 10 
> ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git
> a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> index dab7ca9..44d7e02 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> @@ -17,6 +17,12 @@ Required properties if child node exists:
>  - #address-cells: 	Must be <1> for Serial Engine Address
>  - #size-cells: 		Must be <1> for Serial Engine Address Size
>  - ranges: 		Must be present
> +- interconnects:	phandle to a interconnect provider. Please refer
> +			../interconnect/interconnect.txt for details.
> +			Must be 2 paths corresponding to 2 AXI ports.
> +- interconnect-names:	Port names to differentiate between the
> +			2 interconnect paths defined with interconnect
> +			specifier.
> 
>  Properties for children:
> 
> @@ -67,6 +73,10 @@ Example:
>  		#size-cells = <1>;
>  		ranges;
> 
> +		interconnects = <&qnoc 11 &qnoc 512>,
> +				<&qnoc 0 &qnoc 543>;
> +		interconnect-names = "qup-memory", "qup-config";
> +
>  		i2c0: i2c@a94000 {
>  			compatible = "qcom,geni-i2c";
>  			reg = <0xa94000 0x4000>;

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,a Linux Foundation Collaborative Project

Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support

[alokc]

Please don't review this patch. I've resend patches after adding all the 
mailing list.
Sorry for inconvenience. Please review patches with spi/i2c/uart/kernel 
mailing list added.

On 2019-01-21 16:51, Alok Chauhan wrote:
> Get the interconnect paths for I2C based Serial Engine device
> and vote accordingly based on maximum supported I2C frequency.
> 
> Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
> ---
>  drivers/i2c/busses/i2c-qcom-geni.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c
> b/drivers/i2c/busses/i2c-qcom-geni.c
> index db075bc..e8fe63a 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -14,6 +14,7 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/qcom-geni-se.h>
>  #include <linux/spinlock.h>
> +#include <linux/interconnect.h>
> 
>  #define SE_I2C_TX_TRANS_LEN		0x26c
>  #define SE_I2C_RX_TRANS_LEN		0x270
> @@ -508,6 +509,15 @@ static int geni_i2c_probe(struct platform_device 
> *pdev)
>  		return ret;
>  	}
> 
> +	/* Set the bus quota to a reasonable value */
> +	gi2c->se.avg_bw = Bps_to_icc(1000);
> +	gi2c->se.peak_bw = Bps_to_icc(76800000);
> +	ret = geni_interconnect_init(&gi2c->se);
> +	if (ret) {
> +		dev_err(&pdev->dev, "interconnect_init failed %d\n", ret);
> +		return ret;
> +	}
> +
>  	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
>  							&gi2c->clk_freq_out);
>  	if (ret) {
> @@ -611,6 +621,8 @@ static int __maybe_unused
> geni_i2c_runtime_suspend(struct device *dev)
>  		gi2c->suspended = 1;
>  	}
> 
> +	geni_icc_update_bw(&gi2c->se, false);
> +
>  	return 0;
>  }
> 
> @@ -619,6 +631,7 @@ static int __maybe_unused
> geni_i2c_runtime_resume(struct device *dev)
>  	int ret;
>  	struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
> 
> +	geni_icc_update_bw(&gi2c->se, true);
>  	ret = geni_se_resources_on(&gi2c->se);
>  	if (ret)
>  		return ret;

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,a Linux Foundation Collaborative Project

Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[Evan Green]

On Mon, Jan 21, 2019 at 10:34 PM Alok Chauhan <alokc@codeaurora.org> wrote:
>
> Get the interconnect paths for SPI based Serial Engine device
> and vote accordingly based on maximum supported SPI frequency.
>
> Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
> ---
>  drivers/spi/spi-geni-qcom.c | 20 +++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
> index fdb7cb88..7bbbe9d 100644
> --- a/drivers/spi/spi-geni-qcom.c
> +++ b/drivers/spi/spi-geni-qcom.c
> @@ -12,6 +12,7 @@
>  #include <linux/qcom-geni-se.h>
>  #include <linux/spi/spi.h>
>  #include <linux/spinlock.h>
> +#include <linux/interconnect.h>

Sorted includes please, as mentioned by others.

>
>  /* SPI SE specific registers and respective register fields */
>  #define SE_SPI_CPHA            0x224
> @@ -589,6 +590,15 @@ static int spi_geni_probe(struct platform_device *pdev)
>         spin_lock_init(&mas->lock);
>         pm_runtime_enable(&pdev->dev);
>
> +       /* Set the bus quota to a reasonable value */
> +       mas->se.avg_bw = Bps_to_icc(2500);
> +       mas->se.peak_bw = Bps_to_icc(200000000);

Like the i2c case, can we compute real value based on clock speed?

Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 234 bytes --]

On Tue, Jan 22, 2019 at 12:03:34PM +0530, Alok Chauhan wrote:
> Get the interconnect paths for SPI based Serial Engine device
> and vote accordingly based on maximum supported SPI frequency.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 1041 bytes --]

On Wed, Jan 23, 2019 at 12:45:30PM +0530, alokc@codeaurora.org wrote:
> On 2019-01-23 01:59, Mark Brown wrote:

> > Still not seeing anything except this patch here in my inbox - like I
> > said what's the story with dependencies?

> I've added linux-spi mailing list to all the patches sent as part of this
> series. Not sure why you didn't get other patches. Today I've explicitly
> added you in all the patches.

You really need to ensure that things end up in people's inboxes -
sending them to a mailing list usually means they'll go to a completely
different folder.

> This change series basically enabled interconnect (as per
> bindings/interconnect/interconnect.txt) support in GENI QUPs based drivers
> so appropriate BW request can be put based on SE usages.
> here is my complete change series: https://lore.kernel.org/lkml/1548069703-26595-1-git-send-email-alokc@codeaurora.org/
> I hope I answer to your question properly.

So it looks like there is a dependency on earlier patches in the series,
that's what I needed to know.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[alokc]

On 2019-01-23 01:59, Mark Brown wrote:
> On Tue, Jan 22, 2019 at 12:03:34PM +0530, Alok Chauhan wrote:
> 
>> Get the interconnect paths for SPI based Serial Engine device
>> and vote accordingly based on maximum supported SPI frequency.
> 
> Still not seeing anything except this patch here in my inbox - like I
> said what's the story with dependencies?

I've added linux-spi mailing list to all the patches sent as part of 
this series. Not sure why you didn't get other patches. Today I've 
explicitly added you in all the patches.
This change series basically enabled interconnect (as per 
bindings/interconnect/interconnect.txt) support in GENI QUPs based 
drivers so appropriate BW request can be put based on SE usages.
here is my complete change series: 
https://lore.kernel.org/lkml/1548069703-26595-1-git-send-email-alokc@codeaurora.org/
I hope I answer to your question properly.


-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,a Linux Foundation Collaborative Project

Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 304 bytes --]

On Tue, Jan 22, 2019 at 12:03:34PM +0530, Alok Chauhan wrote:

> Get the interconnect paths for SPI based Serial Engine device
> and vote accordingly based on maximum supported SPI frequency.

Still not seeing anything except this patch here in my inbox - like I
said what's the story with dependencies?

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[Alok Chauhan]

Get the interconnect paths for SPI based Serial Engine device
and vote accordingly based on maximum supported SPI frequency.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
---
 drivers/spi/spi-geni-qcom.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index fdb7cb88..7bbbe9d 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -12,6 +12,7 @@
 #include <linux/qcom-geni-se.h>
 #include <linux/spi/spi.h>
 #include <linux/spinlock.h>
+#include <linux/interconnect.h>
 
 /* SPI SE specific registers and respective register fields */
 #define SE_SPI_CPHA		0x224
@@ -589,6 +590,15 @@ static int spi_geni_probe(struct platform_device *pdev)
 	spin_lock_init(&mas->lock);
 	pm_runtime_enable(&pdev->dev);
 
+	/* Set the bus quota to a reasonable value */
+	mas->se.avg_bw = Bps_to_icc(2500);
+	mas->se.peak_bw = Bps_to_icc(200000000);
+	ret = geni_interconnect_init(&mas->se);
+	if (ret) {
+		dev_err(&pdev->dev, "interconnect_init failed %d\n", ret);
+		return ret;
+	}
+
 	ret = spi_geni_init(mas);
 	if (ret)
 		goto spi_geni_probe_runtime_disable;
@@ -628,8 +638,15 @@ static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
 {
 	struct spi_master *spi = dev_get_drvdata(dev);
 	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	int ret;
 
-	return geni_se_resources_off(&mas->se);
+	ret = geni_se_resources_off(&mas->se);
+	if (ret)
+		return ret;
+
+	geni_icc_update_bw(&mas->se, false);
+
+	return 0;
 }
 
 static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
@@ -637,6 +654,7 @@ static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
 	struct spi_master *spi = dev_get_drvdata(dev);
 	struct spi_geni_master *mas = spi_master_get_devdata(spi);
 
+	geni_icc_update_bw(&mas->se, true);
 	return geni_se_resources_on(&mas->se);
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project