* [PATCH 1/2] Blackfin SMC91x Driver: punt CONFIG_BFIN -- we already have CONFIG_BLACKFIN
2007-11-23 9:55 Bryan Wu
@ 2007-11-23 9:55 ` Bryan Wu
2007-11-24 3:10 ` Jeff Garzik
2007-11-23 9:55 ` [PATCH 2/2] Blackfin EMAC driver: fix bug - NAT doesn't work with bfin_mac driver Bryan Wu
1 sibling, 1 reply; 4+ messages in thread
From: Bryan Wu @ 2007-11-23 9:55 UTC (permalink / raw)
To: jeff, netdev; +Cc: linux-kernel, uclinux-dist-devel, Mike Frysinger, Bryan Wu
From: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---
drivers/net/Kconfig | 2 +-
drivers/net/smc91x.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e8d69b0..1437b37 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -888,7 +888,7 @@ config SMC91X
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN
+ depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index db34e1e..07b7f71 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -55,7 +55,7 @@
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-#elif defined(CONFIG_BFIN)
+#elif defined(CONFIG_BLACKFIN)
#define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH
#define RPC_LSA_DEFAULT RPC_LED_100_10
--
1.5.3.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/2] Blackfin EMAC driver: fix bug - NAT doesn't work with bfin_mac driver
2007-11-23 9:55 Bryan Wu
2007-11-23 9:55 ` [PATCH 1/2] Blackfin SMC91x Driver: punt CONFIG_BFIN -- we already have CONFIG_BLACKFIN Bryan Wu
@ 2007-11-23 9:55 ` Bryan Wu
1 sibling, 0 replies; 4+ messages in thread
From: Bryan Wu @ 2007-11-23 9:55 UTC (permalink / raw)
To: jeff, netdev
Cc: linux-kernel, uclinux-dist-devel, Vitja Makarov, Sonic Zhang, Bryan Wu
From: Vitja Makarov <vitja.makarov@gmail.com>
https://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&forum_id=39&thread_id=23114&_forum_action=ForumMessageBrowse
Today I was dealing with the same problem, on my custom bf537 board, and bfin_mac driver.
I found that the problem is in setting ip_summed flag of skbuff structure,
Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
---
drivers/net/bfin_mac.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 0b99b55..eb97175 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -676,7 +676,7 @@ static void bf537mac_rx(struct net_device *dev)
skb->protocol = eth_type_trans(skb, dev);
#if defined(BFIN_MAC_CSUM_OFFLOAD)
skb->csum = current_rx_ptr->status.ip_payload_csum;
- skb->ip_summed = CHECKSUM_PARTIAL;
+ skb->ip_summed = CHECKSUM_COMPLETE;
#endif
netif_rx(skb);
--
1.5.3.4
^ permalink raw reply related [flat|nested] 4+ messages in thread