linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Iomega ZIP-100 drive unsupported with jmicron JMB361 chip?
@ 2007-12-10 20:09 trash can
  2007-12-17  9:00 ` Andrew Morton
  0 siblings, 1 reply; 11+ messages in thread
From: trash can @ 2007-12-10 20:09 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 4428 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I have tolerated this problem for a year and do not post to this list in
haste. I have posted on forums and searched the community over the past
year. I have looked at the list archive on gossamer-threads.com for
solutions. With Fedora Core 6 unsupported (the last kernel for which my
zip drive worked), it is time for my last attempt at a solution. Please
CC: any response as I have not joined the list. I have compiled a
kernel-debug RPM and can run this if its output would help. Thank you
for any time you might devote to this problem.

motherboard: MSI P965 Platinum/Intel P965 Express Chipset Based (MS-7238
series)
Fedora 8 : kernel 2.6.23.1-42.fc8
Iomega Zip drive internal Model Z100ATAPI

lspci
03:00.0 SATA controller: JMicron Technologies, Inc. JMB361 AHCI/IDE (rev 02)
03:00.1 IDE interface: JMicron Technologies, Inc. JMB361 AHCI/IDE (rev 02)

# lsmod | grep ata
pata_jmicron            8257  0
ata_generic             8901  0
ata_piix               16709  0
libata                 99633  4 ahci,pata_jmicron,ata_generic,ata_piix
scsi_mod              119757  4 sr_mod,sg,libata,sd_mod

I have recently changed the BIOS setting for the SATA#1 Controller from
[IDE] to [AHCI] with no effect. I assume AHCI is correct?

Text below attached as text.txt for readability.
from dmesg:
libata version 2.21 loaded.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 17
ata2: PATA max UDMA/100 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 17
ata1.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS0B, max UDMA/66
ata1.01: ATAPI: IOMEGA  ZIP 100       ATAPI, 05.H, max MWDMA1, CDB intr
ata1.00: configured for UDMA/66
ata1.01: configured for MWDMA1
scsi 0:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-1693S KS0B PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access     IOMEGA   ZIP 100          05.H PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 40 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 40 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>sd 0:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:1:0: [sda] Sense Key : Hardware Error [current]
sd 0:0:1:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0

If a disk is inserted into the drive (/var/log/messages)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Spinning up disk.....<5>sd 0:0:1:0: [sda] Spinning up disk....ready
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write Protect is off
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write Protect is off
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 14:22:53 localhost kernel:  sda:<6>sd 0:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Sense Key : Hardware Error [current]
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Add. Sense: Scsi parity error
Dec 10 14:22:53 localhost kernel: end_request: I/O error, dev sda, sector 0
Dec 10 14:22:53 localhost kernel: printk: 42 messages suppressed.
Dec 10 14:22:53 localhost kernel: Buffer I/O error on device sda, logical block 0

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org

iD8DBQFHXZ0Hz1/aqdDsM3URAs0UAJ0TUthyDtWaoSIHrbaIc43v/6yj+ACgkMyx
fC3xUrTkYyojPOV7YBSqLSY=
=0eW3
-----END PGP SIGNATURE-----

[-- Attachment #2: text.txt --]
[-- Type: text/plain, Size: 2848 bytes --]

from dmesg:
libata version 2.21 loaded.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 17
ata2: PATA max UDMA/100 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 17
ata1.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS0B, max UDMA/66
ata1.01: ATAPI: IOMEGA  ZIP 100       ATAPI, 05.H, max MWDMA1, CDB intr
ata1.00: configured for UDMA/66
ata1.01: configured for MWDMA1
scsi 0:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-1693S KS0B PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access     IOMEGA   ZIP 100          05.H PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 40 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 40 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>sd 0:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:1:0: [sda] Sense Key : Hardware Error [current]
sd 0:0:1:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0

If a disk is inserted into the drive (/var/log/messages)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Spinning up disk.....<5>sd 0:0:1:0: [sda] Spinning up disk....ready
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write Protect is off
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write Protect is off
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 14:22:53 localhost kernel:  sda:<6>sd 0:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Sense Key : Hardware Error [current]
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Add. Sense: Scsi parity error
Dec 10 14:22:53 localhost kernel: end_request: I/O error, dev sda, sector 0
Dec 10 14:22:53 localhost kernel: printk: 42 messages suppressed.
Dec 10 14:22:53 localhost kernel: Buffer I/O error on device sda, logical block 0

^ permalink raw reply	[flat|nested] 11+ messages in thread
end of thread, other threads:[~2007-12-17  9:00 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <fa.yONLBG7CMuz80f4dUP5r/5k7emw@ifi.uio.no>
2007-12-11  0:21 ` Iomega ZIP-100 drive unsupported with jmicron JMB361 chip? Robert Hancock
2007-12-11 15:38   ` trash can
2007-12-11 16:54     ` Mark Lord
2007-12-11 16:57       ` Mark Lord
2007-12-11 19:05         ` trash can
2007-12-11 19:30           ` Mark Lord
2007-12-12 19:23             ` trash can
2007-12-17  0:50               ` Bill Davidsen
2007-12-15  4:31             ` trash can
2007-12-10 20:09 trash can
2007-12-17  9:00 ` Andrew Morton

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).