* Symbols not found for some files
@ 2018-10-03 20:42 Paul Menzel
2018-10-03 20:57 ` Arnaldo Carvalho de Melo
0 siblings, 1 reply; 3+ messages in thread
From: Paul Menzel @ 2018-10-03 20:42 UTC (permalink / raw)
To: Peter Zijlstra, Ingo Molnar, Arnaldo Carvalho de Melo; +Cc: linux-kernel
Dear Linux folks,
For profiling the boot on my Debian Sid/unstable system (32-bit user
space), the following service unit is used.
```
$ systemctl cat perf
# /etc/systemd/system/perf.service
[Unit]
Description=Perf 10 s
DefaultDependencies=no
[Service]
ExecStart=/usr/local/bin/perf record -F 999 -g -a -o /dev/shm/perf.data
sleep 10
[Install]
WantedBy=sysinit.target
```
Running `perf.data` through `perf script`, the messages below are shown.
```
[vdso] with build id 69dd0f0c522f0d3e2a87722d70245ab9725c8b42 not found,
continuing without symbols
/lib/systemd/libsystemd-shared-239.so with build id
196c7922a15fa971d68775522dd16e82da46ebb3 not found, continuing without
symbols
/lib/systemd/systemd-journald with build id
9e31591e8c9bb88de06e96a251f34d8a7e201f6c not found, continuing without
symbols
/lib/systemd/systemd with build id
1b92f342a959b6ff370b82092bfadaf1d470a7b9 not found, continuing without
symbols
/lib/systemd/systemd-networkd with build id
9fa8f6abc1f2e5c1018d0a33be058c22e25efaff not found, continuing without
symbols
/lib/systemd/systemd-logind with build id
63d664b5f8f8e85274aff6730ec9e924d74c8fed not found, continuing without
symbols
```
But, the debug symbol packages are installed (`systemd-dbgsym`), and GDB
loads the debug symbols just fine.
```
$ gdb --quiet /lib/systemd/libsystemd-shared-239.so
Reading symbols from /lib/systemd/libsystemd-shared-239.so...Reading
symbols from
/usr/lib/debug/.build-id/19/6c7922a15fa971d68775522dd16e82da46ebb3.debug...done.
done.
(gdb)
```
Tracing `perf`, it also seems to find them, but does not use them.
```
stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
0xbfbd54ac) = -1 ENOENT (No such file or directory)
stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/elf",
0xbfbd75bc) = -1 ENOENT (No such file or directory)
stat64("03af6935d5ab00f79fe12b4098d27d3f70c19f.debug", 0xbfbd1bfc) = -1
ENOENT (No such file or directory)
stat64("/lib/i386-linux-gnu/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
0xbfbd1bfc) = -1 ENOENT (No such file or directory)
stat64("/lib/i386-linux-gnu/.debug/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
0xbfbd1bfc) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/debug/lib/i386-linux-gnu/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
0xbfbd1bfc) = -1 ENOENT (No such file or directory)
stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
0xbfbd1b5c) = -1 ENOENT (No such file or directory)
stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/elf",
0xbfbd3c6c) = -1 ENOENT (No such file or directory)
stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
0xbfbd1b5c) = -1 ENOENT (No such file or directory)
stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/debug",
0xbfbd3c6c) = -1 ENOENT (No such file or directory)
stat64("/usr/lib/debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
{st_mode=S_IFREG|0644, st_size=4524336, ...}) = 0
openat(AT_FDCWD,
"/usr/lib/debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
O_RDONLY|O_LARGEFILE) = 91
```
Looking into `perf` with GDB, the code in `util/symbol.c` below is not
setting `runtime_ss`, because `symsrc__possibly_runtime(ss)` returns
false. Then the for loop is not quit, and continues.
```
if (!syms_ss && symsrc__has_symtab(ss)) {
syms_ss = ss;
next_slot = true;
if (!dso->symsrc_filename)
dso->symsrc_filename = strdup(name);
}
if (!runtime_ss && symsrc__possibly_runtime(ss)) {
runtime_ss = ss;
next_slot = true;
}
if (next_slot) {
ss_pos++;
if (syms_ss && runtime_ss)
break;
} else {
symsrc__destroy(ss);
}
```
Do you have an idea, why the files from the systemd Debian package cause
problems for `perf` but not GDB? The Debian maintainers mentioned, that
LTO is enabled for the Debian package.
Please tell me, if you need other information to look into the problem.
Kind regards,
Paul
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Symbols not found for some files
2018-10-03 20:42 Symbols not found for some files Paul Menzel
@ 2018-10-03 20:57 ` Arnaldo Carvalho de Melo
2018-10-04 3:19 ` Paul Menzel
0 siblings, 1 reply; 3+ messages in thread
From: Arnaldo Carvalho de Melo @ 2018-10-03 20:57 UTC (permalink / raw)
To: Paul Menzel; +Cc: Peter Zijlstra, Ingo Molnar, linux-kernel
Em Wed, Oct 03, 2018 at 10:42:39PM +0200, Paul Menzel escreveu:
> Dear Linux folks,
>
>
> For profiling the boot on my Debian Sid/unstable system (32-bit user space),
> the following service unit is used.
You forgot to mention what is the version of the perf tool in that
system, so that I could check if this got fixed somehow after that
version.
Can you please provide it?
Thanks,
- Arnaldo
> ```
> $ systemctl cat perf
> # /etc/systemd/system/perf.service
>
> [Unit]
> Description=Perf 10 s
> DefaultDependencies=no
>
> [Service]
> ExecStart=/usr/local/bin/perf record -F 999 -g -a -o /dev/shm/perf.data
> sleep 10
>
> [Install]
> WantedBy=sysinit.target
> ```
>
> Running `perf.data` through `perf script`, the messages below are shown.
>
> ```
> [vdso] with build id 69dd0f0c522f0d3e2a87722d70245ab9725c8b42 not found,
> continuing without symbols
> /lib/systemd/libsystemd-shared-239.so with build id
> 196c7922a15fa971d68775522dd16e82da46ebb3 not found, continuing without
> symbols
> /lib/systemd/systemd-journald with build id
> 9e31591e8c9bb88de06e96a251f34d8a7e201f6c not found, continuing without
> symbols
> /lib/systemd/systemd with build id 1b92f342a959b6ff370b82092bfadaf1d470a7b9
> not found, continuing without symbols
> /lib/systemd/systemd-networkd with build id
> 9fa8f6abc1f2e5c1018d0a33be058c22e25efaff not found, continuing without
> symbols
> /lib/systemd/systemd-logind with build id
> 63d664b5f8f8e85274aff6730ec9e924d74c8fed not found, continuing without
> symbols
> ```
>
> But, the debug symbol packages are installed (`systemd-dbgsym`), and GDB
> loads the debug symbols just fine.
>
> ```
> $ gdb --quiet /lib/systemd/libsystemd-shared-239.so
> Reading symbols from /lib/systemd/libsystemd-shared-239.so...Reading symbols
> from /usr/lib/debug/.build-id/19/6c7922a15fa971d68775522dd16e82da46ebb3.debug...done.
> done.
> (gdb)
> ```
>
> Tracing `perf`, it also seems to find them, but does not use them.
>
> ```
> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
> 0xbfbd54ac) = -1 ENOENT (No such file or directory)
> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/elf",
> 0xbfbd75bc) = -1 ENOENT (No such file or directory)
> stat64("03af6935d5ab00f79fe12b4098d27d3f70c19f.debug", 0xbfbd1bfc) = -1
> ENOENT (No such file or directory)
> stat64("/lib/i386-linux-gnu/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
> 0xbfbd1bfc) = -1 ENOENT (No such file or directory)
> stat64("/lib/i386-linux-gnu/.debug/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
> 0xbfbd1bfc) = -1 ENOENT (No such file or directory)
> stat64("/usr/lib/debug/lib/i386-linux-gnu/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
> 0xbfbd1bfc) = -1 ENOENT (No such file or directory)
> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
> 0xbfbd1b5c) = -1 ENOENT (No such file or directory)
> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/elf",
> 0xbfbd3c6c) = -1 ENOENT (No such file or directory)
> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
> 0xbfbd1b5c) = -1 ENOENT (No such file or directory)
> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/debug",
> 0xbfbd3c6c) = -1 ENOENT (No such file or directory)
> stat64("/usr/lib/debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
> {st_mode=S_IFREG|0644, st_size=4524336, ...}) = 0
> openat(AT_FDCWD,
> "/usr/lib/debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
> O_RDONLY|O_LARGEFILE) = 91
> ```
>
> Looking into `perf` with GDB, the code in `util/symbol.c` below is not
> setting `runtime_ss`, because `symsrc__possibly_runtime(ss)` returns false.
> Then the for loop is not quit, and continues.
>
> ```
> if (!syms_ss && symsrc__has_symtab(ss)) {
> syms_ss = ss;
> next_slot = true;
> if (!dso->symsrc_filename)
> dso->symsrc_filename = strdup(name);
> }
>
> if (!runtime_ss && symsrc__possibly_runtime(ss)) {
> runtime_ss = ss;
> next_slot = true;
> }
>
> if (next_slot) {
> ss_pos++;
>
> if (syms_ss && runtime_ss)
> break;
> } else {
> symsrc__destroy(ss);
> }
>
> ```
>
> Do you have an idea, why the files from the systemd Debian package cause
> problems for `perf` but not GDB? The Debian maintainers mentioned, that LTO
> is enabled for the Debian package.
>
> Please tell me, if you need other information to look into the problem.
>
>
> Kind regards,
>
> Paul
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Symbols not found for some files
2018-10-03 20:57 ` Arnaldo Carvalho de Melo
@ 2018-10-04 3:19 ` Paul Menzel
0 siblings, 0 replies; 3+ messages in thread
From: Paul Menzel @ 2018-10-04 3:19 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo; +Cc: Peter Zijlstra, Ingo Molnar, linux-kernel
Dear Arnaldo,
Am 03.10.2018 um 22:57 schrieb Arnaldo Carvalho de Melo:
> Em Wed, Oct 03, 2018 at 10:42:39PM +0200, Paul Menzel escreveu:
>> For profiling the boot on my Debian Sid/unstable system (32-bit user space),
>> the following service unit is used.
>
> You forgot to mention what is the version of the perf tool in that
> system, so that I could check if this got fixed somehow after that
> version.
>
> Can you please provide it?
Sorry for not mentioning it. I built it from Linus’ Linux master branch.
$ perf --version
perf version 4.19.rc5.gd7887c
Kind regards,
Paul
>> ```
>> $ systemctl cat perf
>> # /etc/systemd/system/perf.service
>>
>> [Unit]
>> Description=Perf 10 s
>> DefaultDependencies=no
>>
>> [Service]
>> ExecStart=/usr/local/bin/perf record -F 999 -g -a -o /dev/shm/perf.data
>> sleep 10
>>
>> [Install]
>> WantedBy=sysinit.target
>> ```
>>
>> Running `perf.data` through `perf script`, the messages below are shown.
>>
>> ```
>> [vdso] with build id 69dd0f0c522f0d3e2a87722d70245ab9725c8b42 not found,
>> continuing without symbols
>> /lib/systemd/libsystemd-shared-239.so with build id
>> 196c7922a15fa971d68775522dd16e82da46ebb3 not found, continuing without
>> symbols
>> /lib/systemd/systemd-journald with build id
>> 9e31591e8c9bb88de06e96a251f34d8a7e201f6c not found, continuing without
>> symbols
>> /lib/systemd/systemd with build id 1b92f342a959b6ff370b82092bfadaf1d470a7b9
>> not found, continuing without symbols
>> /lib/systemd/systemd-networkd with build id
>> 9fa8f6abc1f2e5c1018d0a33be058c22e25efaff not found, continuing without
>> symbols
>> /lib/systemd/systemd-logind with build id
>> 63d664b5f8f8e85274aff6730ec9e924d74c8fed not found, continuing without
>> symbols
>> ```
>>
>> But, the debug symbol packages are installed (`systemd-dbgsym`), and GDB
>> loads the debug symbols just fine.
>>
>> ```
>> $ gdb --quiet /lib/systemd/libsystemd-shared-239.so
>> Reading symbols from /lib/systemd/libsystemd-shared-239.so...Reading symbols
>> from /usr/lib/debug/.build-id/19/6c7922a15fa971d68775522dd16e82da46ebb3.debug...done.
>> done.
>> (gdb)
>> ```
>>
>> Tracing `perf`, it also seems to find them, but does not use them.
>>
>> ```
>> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
>> 0xbfbd54ac) = -1 ENOENT (No such file or directory)
>> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/elf",
>> 0xbfbd75bc) = -1 ENOENT (No such file or directory)
>> stat64("03af6935d5ab00f79fe12b4098d27d3f70c19f.debug", 0xbfbd1bfc) = -1
>> ENOENT (No such file or directory)
>> stat64("/lib/i386-linux-gnu/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
>> 0xbfbd1bfc) = -1 ENOENT (No such file or directory)
>> stat64("/lib/i386-linux-gnu/.debug/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
>> 0xbfbd1bfc) = -1 ENOENT (No such file or directory)
>> stat64("/usr/lib/debug/lib/i386-linux-gnu/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
>> 0xbfbd1bfc) = -1 ENOENT (No such file or directory)
>> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
>> 0xbfbd1b5c) = -1 ENOENT (No such file or directory)
>> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/elf",
>> 0xbfbd3c6c) = -1 ENOENT (No such file or directory)
>> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f",
>> 0xbfbd1b5c) = -1 ENOENT (No such file or directory)
>> stat64("/home/kodi/.debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f/debug",
>> 0xbfbd3c6c) = -1 ENOENT (No such file or directory)
>> stat64("/usr/lib/debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
>> {st_mode=S_IFREG|0644, st_size=4524336, ...}) = 0
>> openat(AT_FDCWD,
>> "/usr/lib/debug/.build-id/a2/03af6935d5ab00f79fe12b4098d27d3f70c19f.debug",
>> O_RDONLY|O_LARGEFILE) = 91
>> ```
>>
>> Looking into `perf` with GDB, the code in `util/symbol.c` below is not
>> setting `runtime_ss`, because `symsrc__possibly_runtime(ss)` returns false.
>> Then the for loop is not quit, and continues.
>>
>> ```
>> if (!syms_ss && symsrc__has_symtab(ss)) {
>> syms_ss = ss;
>> next_slot = true;
>> if (!dso->symsrc_filename)
>> dso->symsrc_filename = strdup(name);
>> }
>>
>> if (!runtime_ss && symsrc__possibly_runtime(ss)) {
>> runtime_ss = ss;
>> next_slot = true;
>> }
>>
>> if (next_slot) {
>> ss_pos++;
>>
>> if (syms_ss && runtime_ss)
>> break;
>> } else {
>> symsrc__destroy(ss);
>> }
>>
>> ```
>>
>> Do you have an idea, why the files from the systemd Debian package cause
>> problems for `perf` but not GDB? The Debian maintainers mentioned, that LTO
>> is enabled for the Debian package.
>>
>> Please tell me, if you need other information to look into the problem.
>>
>>
>> Kind regards,
>>
>> Paul
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-10-04 3:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-03 20:42 Symbols not found for some files Paul Menzel
2018-10-03 20:57 ` Arnaldo Carvalho de Melo
2018-10-04 3:19 ` Paul Menzel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).