* [PATCH 0/3] debloat aic7xxx and aic79xx drivers
@ 2008-03-23 3:40 Denys Vlasenko
2008-03-23 3:41 ` [PATCH 1/3] " Denys Vlasenko
0 siblings, 1 reply; 13+ messages in thread
From: Denys Vlasenko @ 2008-03-23 3:40 UTC (permalink / raw)
To: Andrew Morton; +Cc: Hannes Reinecke, linux-scsi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2428 bytes --]
Hi Andrew,
Can you please take these patches into -mm?
I seem to be unable to push them through scsi people,
they silently drop them on the floor.
There patches significantly debloat drivers/scsi/aic7xxx/*.
1-debloat.patch
Deinlines and moves big functions from .h to .c files.
Adds prototypes for ahc_lookup_scb and ahd_lookup_scb to .h files.
2-addstatic.patch
Adds statics, #ifdefs out huge amount of unused code, adds consts
3-addconst.patch
Adds more consts
Driver code/data size reductions with and without debugging enabled
(aic0 is just an unmodified linux-2.6.25-rc6):
text data bss dec hex filename
211264 28258 1172 240694 3ac36 linux-2.6.25-rc6-aic0-TEST/drivers/scsi/aic7xxx/built-in.o
160012 28258 1172 189442 2e402 linux-2.6.25-rc6-aic1-TEST/drivers/scsi/aic7xxx/built-in.o
166698 20786 1172 188656 2e0f0 linux-2.6.25-rc6-aic2-TEST/drivers/scsi/aic7xxx/built-in.o
185014 2346 1172 188532 2e074 linux-2.6.25-rc6-aic3-TEST/drivers/scsi/aic7xxx/built-in.o
text data bss dec hex filename
264496 47922 1188 313606 4c906 linux-2.6.25-rc6-aic0-TEST2/drivers/scsi/aic7xxx/built-in.o
201056 47922 1188 250166 3d136 linux-2.6.25-rc6-aic1-TEST2/drivers/scsi/aic7xxx/built-in.o
186564 20786 1188 208538 32e9a linux-2.6.25-rc6-aic2-TEST2/drivers/scsi/aic7xxx/built-in.o
204880 2346 1188 208414 32e1e linux-2.6.25-rc6-aic3-TEST2/drivers/scsi/aic7xxx/built-in.o
Configs used for these builds are attached to this email
for anyone interested.
make namespacecheck goes from 400+ functions to:
drivers/scsi/aic7xxx/aic79xx_core.o
ahd_inq
ahd_inw
ahd_outq
ahd_outw
drivers/scsi/aic7xxx/aic79xx_osm.o
ahd_insb
drivers/scsi/aic7xxx/aic7xxx_core.o
ahc_inq
ahc_outq
drivers/scsi/aic7xxx/aic7xxx_osm.o
ahc_insb
None of these patches touch any logic, code changes are pretty minimal.
Compile tested and applies cleanly to 2.6.25-rc6.
I don't have this hardware anymore and cannot run test these patches,
but other people reported success in the past:
On Monday 15 October 2007 14:53, Gabriel C wrote:
> > I can test these patches on an aic7892 controller later on today if you want.
>
> Works fine for me tested on :
>
> 03:0e.0 SCSI storage controller [0100]: Adaptec AIC-7892P U160/m [9005:008f] (rev 02)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
--
vda
[-- Attachment #2: config-TEST.bz2 --]
[-- Type: application/x-bzip2, Size: 7959 bytes --]
[-- Attachment #3: config-TEST2.bz2 --]
[-- Type: application/x-bzip2, Size: 8058 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/3] debloat aic7xxx and aic79xx drivers
2008-03-23 3:40 [PATCH 0/3] debloat aic7xxx and aic79xx drivers Denys Vlasenko
@ 2008-03-23 3:41 ` Denys Vlasenko
2008-03-23 3:42 ` [PATCH 2/3] " Denys Vlasenko
2008-04-07 10:31 ` [PATCH 1/3] " Hannes Reinecke
0 siblings, 2 replies; 13+ messages in thread
From: Denys Vlasenko @ 2008-03-23 3:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Hannes Reinecke, linux-scsi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 187 bytes --]
Deinlines and moves big functions from .h to .c files.
Adds prototypes for ahc_lookup_scb and ahd_lookup_scb to .h files.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
--
vda
[-- Attachment #2: linux-2.6.25-rc6-aic1-debloat.diff.bz2 --]
[-- Type: application/x-bzip2, Size: 15051 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 2/3] debloat aic7xxx and aic79xx drivers
2008-03-23 3:41 ` [PATCH 1/3] " Denys Vlasenko
@ 2008-03-23 3:42 ` Denys Vlasenko
2008-03-23 3:42 ` [PATCH 3/3] " Denys Vlasenko
2008-04-07 10:34 ` [PATCH 2/3] " Hannes Reinecke
2008-04-07 10:31 ` [PATCH 1/3] " Hannes Reinecke
1 sibling, 2 replies; 13+ messages in thread
From: Denys Vlasenko @ 2008-03-23 3:42 UTC (permalink / raw)
To: Andrew Morton; +Cc: Hannes Reinecke, linux-scsi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 132 bytes --]
Adds statics, #ifdefs out huge amount of unused code, adds consts
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
--
vda
[-- Attachment #2: linux-2.6.25-rc6-aic2-addstatic.diff.bz2 --]
[-- Type: application/x-bzip2, Size: 24690 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 3/3] debloat aic7xxx and aic79xx drivers
2008-03-23 3:42 ` [PATCH 2/3] " Denys Vlasenko
@ 2008-03-23 3:42 ` Denys Vlasenko
2008-04-07 10:36 ` Hannes Reinecke
2008-04-07 10:34 ` [PATCH 2/3] " Hannes Reinecke
1 sibling, 1 reply; 13+ messages in thread
From: Denys Vlasenko @ 2008-03-23 3:42 UTC (permalink / raw)
To: Andrew Morton; +Cc: Hannes Reinecke, linux-scsi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 83 bytes --]
Adds more consts
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
--
vda
[-- Attachment #2: linux-2.6.25-rc6-aic3-addconst.diff.bz2 --]
[-- Type: application/x-bzip2, Size: 4781 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/3] debloat aic7xxx and aic79xx drivers
2008-03-23 3:41 ` [PATCH 1/3] " Denys Vlasenko
2008-03-23 3:42 ` [PATCH 2/3] " Denys Vlasenko
@ 2008-04-07 10:31 ` Hannes Reinecke
2008-04-07 18:01 ` Denys Vlasenko
1 sibling, 1 reply; 13+ messages in thread
From: Hannes Reinecke @ 2008-04-07 10:31 UTC (permalink / raw)
To: Denys Vlasenko; +Cc: Andrew Morton, linux-scsi, linux-kernel
Hi Denys,
Denys Vlasenko wrote:
> Deinlines and moves big functions from .h to .c files.
> Adds prototypes for ahc_lookup_scb and ahd_lookup_scb to .h files.
>
> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> --
> vda
Patch looks good to me.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 2/3] debloat aic7xxx and aic79xx drivers
2008-03-23 3:42 ` [PATCH 2/3] " Denys Vlasenko
2008-03-23 3:42 ` [PATCH 3/3] " Denys Vlasenko
@ 2008-04-07 10:34 ` Hannes Reinecke
2008-04-07 18:00 ` Denys Vlasenko
1 sibling, 1 reply; 13+ messages in thread
From: Hannes Reinecke @ 2008-04-07 10:34 UTC (permalink / raw)
To: Denys Vlasenko; +Cc: Andrew Morton, linux-scsi, linux-kernel
Hi Denys,
Denys Vlasenko wrote:
> Adds statics, #ifdefs out huge amount of unused code, adds consts
>
> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> --
> vda
>
NACK. We need the #defines to print out the registers.
And in either case the *_shipped files are in fact
autogenerated by aic assembler, so we need to fix that
one, too.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 3/3] debloat aic7xxx and aic79xx drivers
2008-03-23 3:42 ` [PATCH 3/3] " Denys Vlasenko
@ 2008-04-07 10:36 ` Hannes Reinecke
0 siblings, 0 replies; 13+ messages in thread
From: Hannes Reinecke @ 2008-04-07 10:36 UTC (permalink / raw)
To: Denys Vlasenko; +Cc: Andrew Morton, linux-scsi, linux-kernel
Hi Denys,
Denys Vlasenko wrote:
> Adds more consts
>
> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> --
> vda
>
ACK. Looks ok.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 2/3] debloat aic7xxx and aic79xx drivers
2008-04-07 10:34 ` [PATCH 2/3] " Hannes Reinecke
@ 2008-04-07 18:00 ` Denys Vlasenko
0 siblings, 0 replies; 13+ messages in thread
From: Denys Vlasenko @ 2008-04-07 18:00 UTC (permalink / raw)
To: Hannes Reinecke; +Cc: Andrew Morton, linux-scsi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 10607 bytes --]
On Monday 07 April 2008 12:34, Hannes Reinecke wrote:
> > Adds statics, #ifdefs out huge amount of unused code, adds consts
> >
> > Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> > --
> > vda
> >
> NACK. We need the #defines to print out the registers.
> And in either case the *_shipped files are in fact
> autogenerated by aic assembler, so we need to fix that
> one, too.
I assume you are talking about this part of a patch:
--- linux-2.6.25-rc6-aic1/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped 2008-03-23 00:43:20.000000000 +0100
+++ linux-2.6.25-rc6-aic2/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped 2008-03-23 00:54:59.000000000 +0100
@@ -11,23 +11,18 @@ typedef struct ahd_reg_parse_entry {
uint8_t value;
uint8_t mask;
} ahd_reg_parse_entry_t;
+#if 0 /* unused */
+
#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_mode_ptr_print;
#else
#define ahd_mode_ptr_print(regvalue, cur_col, wrap) \
ahd_print_register(NULL, 0, "MODE_PTR", 0x00, regvalue, cur_col, wrap)
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_intstat_print;
-#else
-#define ahd_intstat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "INTSTAT", 0x01, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
ahd_reg_print_t ahd_seqintcode_print;
#else
#define ahd_seqintcode_print(regvalue, cur_col, wrap) \
ahd_print_register(NULL, 0, "SEQINTCODE", 0x02, regvalue, cur_col, wrap)
@@ -75,22 +70,8 @@ ahd_reg_print_t ahd_hescb_qoff_print;
ahd_print_register(NULL, 0, "HESCB_QOFF", 0x08, regvalue, cur_col, wrap)
#endif
#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_hs_mailbox_print;
-#else
-#define ahd_hs_mailbox_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "HS_MAILBOX", 0x0b, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
-ahd_reg_print_t ahd_seqintstat_print;
-#else
-#define ahd_seqintstat_print(regvalue, cur_col, wrap) \
- ahd_print_register(NULL, 0, "SEQINTSTAT", 0x0c, regvalue, cur_col, wrap)
-#endif
-
-#if AIC_DEBUG_REGISTERS
.....
.....
Let me explain what I am doing here. I am NOT deleting ahd_intstat_print
definition, I am moving it below the #endif which terminates big
#if 0 /* unused */ block, moving to this place:
@@ -2377,8 +2043,346 @@ ahd_reg_print_t ahd_scb_disconnected_lis
#define ahd_scb_disconnected_lists_print(regvalue, cur_col, wrap) \
ahd_print_register(NULL, 0, "SCB_DISCONNECTED_LISTS", 0x1b8, regvalue, cur_col, wrap)
#endif
+#endif /* unused */
+
+#if AIC_DEBUG_REGISTERS
+ahd_reg_print_t ahd_intstat_print;
+#else
+#define ahd_intstat_print(regvalue, cur_col, wrap) \
+ ahd_print_register(NULL, 0, "INTSTAT", 0x01, regvalue, cur_col, wrap)
+#endif
...
...
#if 0 / #endif block ends up containing definitions of 290 functions/macros,
none of which is EVER used. I used this script (below) and verified that
they are never mentioned anywhere outside of *_shipped files.
I also did test builds with and without debug enabled and they build
with no problems. No undefined references!
cd $KERNEL_TREE/drivers/scsi/aic7xxx/ || exit 1
echo -n "\
ahd_mode_ptr_print
ahd_seqintcode_print
ahd_clrint_print
ahd_error_print
ahd_clrerr_print
ahd_hcntrl_print
ahd_hnscb_qoff_print
ahd_hescb_qoff_print
ahd_clrseqintstat_print
ahd_swtimer_print
ahd_snscb_qoff_print
ahd_sescb_qoff_print
ahd_sdscb_qoff_print
ahd_qoff_ctlsta_print
ahd_dscommand0_print
ahd_arbctl_print
ahd_sg_cache_pre_print
ahd_lqin_print
ahd_typeptr_print
ahd_tagptr_print
ahd_lunptr_print
ahd_datalenptr_print
ahd_statlenptr_print
ahd_cmdlenptr_print
ahd_attrptr_print
ahd_flagptr_print
ahd_cmdptr_print
ahd_qnextptr_print
ahd_idptr_print
ahd_abrtbyteptr_print
ahd_abrtbitptr_print
ahd_maxcmdbytes_print
ahd_maxcmd2rcv_print
ahd_shortthresh_print
ahd_lunlen_print
ahd_cdblimit_print
ahd_maxcmd_print
ahd_maxcmdcnt_print
ahd_lqrsvd01_print
ahd_lqrsvd16_print
ahd_lqrsvd17_print
ahd_cmdrsvd0_print
ahd_lqctl0_print
ahd_lqctl1_print
ahd_scsbist0_print
ahd_lqctl2_print
ahd_scsbist1_print
ahd_sxfrctl0_print
ahd_dlcount_print
ahd_businitid_print
ahd_sxfrctl1_print
ahd_bustargid_print
ahd_sxfrctl2_print
ahd_scsisigo_print
ahd_multargid_print
ahd_scsidat0_img_print
ahd_scsidat_print
ahd_targidin_print
ahd_optionmode_print
ahd_sblkctl_print
ahd_clrsint0_print
ahd_clrsint1_print
ahd_simode2_print
ahd_clrsint2_print
ahd_lqistate_print
ahd_lqostate_print
ahd_clrlqiint0_print
ahd_lqimode0_print
ahd_lqimode1_print
ahd_clrlqiint1_print
ahd_simode3_print
ahd_clrsint3_print
ahd_clrlqoint0_print
ahd_lqomode0_print
ahd_lqomode1_print
ahd_clrlqoint1_print
ahd_os_space_cnt_print
ahd_gsfifo_print
ahd_lqoscsctl_print
ahd_nextscb_print
ahd_clrseqintsrc_print
ahd_currscb_print
ahd_crccontrol_print
ahd_dfftag_print
ahd_lastscb_print
ahd_scsitest_print
ahd_iopdnctl_print
ahd_shaddr_print
ahd_negoaddr_print
ahd_dgrpcrci_print
ahd_negperiod_print
ahd_packcrci_print
ahd_negoffset_print
ahd_negppropts_print
ahd_negconopts_print
ahd_annexcol_print
ahd_annexdat_print
ahd_scschkn_print
ahd_iownid_print
ahd_pll960ctl0_print
ahd_shcnt_print
ahd_townid_print
ahd_pll960ctl1_print
ahd_pll960cnt0_print
ahd_xsig_print
ahd_pll400ctl0_print
ahd_fairness_print
ahd_pll400ctl1_print
ahd_unfairness_print
ahd_pll400cnt0_print
ahd_haddr_print
ahd_plldelay_print
ahd_hodmaadr_print
ahd_hodmacnt_print
ahd_hcnt_print
ahd_hodmaen_print
ahd_scbhaddr_print
ahd_sghaddr_print
ahd_scbhcnt_print
ahd_sghcnt_print
ahd_dff_thrsh_print
ahd_romaddr_print
ahd_romcntrl_print
ahd_romdata_print
ahd_cmcrxmsg0_print
ahd_roenable_print
ahd_ovlyrxmsg0_print
ahd_dchrxmsg0_print
ahd_ovlyrxmsg1_print
ahd_nsenable_print
ahd_cmcrxmsg1_print
ahd_dchrxmsg1_print
ahd_dchrxmsg2_print
ahd_cmcrxmsg2_print
ahd_ost_print
ahd_ovlyrxmsg2_print
ahd_dchrxmsg3_print
ahd_ovlyrxmsg3_print
ahd_cmcrxmsg3_print
ahd_pcixctl_print
ahd_ovlyseqbcnt_print
ahd_dchseqbcnt_print
ahd_cmcseqbcnt_print
ahd_cmcspltstat0_print
ahd_dchspltstat0_print
ahd_ovlyspltstat0_print
ahd_cmcspltstat1_print
ahd_ovlyspltstat1_print
ahd_dchspltstat1_print
ahd_sgrxmsg0_print
ahd_slvspltoutadr0_print
ahd_sgrxmsg1_print
ahd_slvspltoutadr1_print
ahd_sgrxmsg2_print
ahd_slvspltoutadr2_print
ahd_sgrxmsg3_print
ahd_slvspltoutadr3_print
ahd_sgseqbcnt_print
ahd_slvspltoutattr0_print
ahd_slvspltoutattr1_print
ahd_slvspltoutattr2_print
ahd_sgspltstat0_print
ahd_sgspltstat1_print
ahd_sfunct_print
ahd_df0pcistat_print
ahd_reg0_print
ahd_df1pcistat_print
ahd_sgpcistat_print
ahd_reg1_print
ahd_cmcpcistat_print
ahd_ovlypcistat_print
ahd_reg_isr_print
ahd_msipcistat_print
ahd_targpcistat_print
ahd_data_count_odd_print
ahd_scbptr_print
ahd_ccscbacnt_print
ahd_scbautoptr_print
ahd_ccsgaddr_print
ahd_ccscbadr_bk_print
ahd_ccscbaddr_print
ahd_cmc_rambist_print
ahd_ccsgram_print
ahd_flexadr_print
ahd_ccscbram_print
ahd_flexcnt_print
ahd_flexdmastat_print
ahd_flexdata_print
ahd_brddat_print
ahd_brdctl_print
ahd_seeadr_print
ahd_seedat_print
ahd_seectl_print
ahd_seestat_print
ahd_scbcnt_print
ahd_dfwaddr_print
ahd_dspfltrctl_print
ahd_dspdatactl_print
ahd_dfraddr_print
ahd_dspreqctl_print
ahd_dspackctl_print
ahd_dfdat_print
ahd_dspselect_print
ahd_wrtbiasctl_print
ahd_rcvrbiosctl_print
ahd_wrtbiascalc_print
ahd_rcvrbiascalc_print
ahd_dfptrs_print
ahd_skewcalc_print
ahd_dfbkptr_print
ahd_dfdbctl_print
ahd_dfscnt_print
ahd_dfbcnt_print
ahd_ovlyaddr_print
ahd_seqctl1_print
ahd_flags_print
ahd_seqram_print
ahd_prgmcnt_print
ahd_accum_print
ahd_sindex_print
ahd_dindex_print
ahd_brkaddr0_print
ahd_brkaddr1_print
ahd_allones_print
ahd_allzeros_print
ahd_none_print
ahd_sindir_print
ahd_dindir_print
ahd_function1_print
ahd_stack_print
ahd_intvec1_addr_print
ahd_curaddr_print
ahd_lastaddr_print
ahd_intvec2_addr_print
ahd_longjmp_addr_print
ahd_accum_save_print
ahd_waiting_scb_tails_print
ahd_ahd_pci_config_base_print
ahd_sram_base_print
ahd_waiting_tid_head_print
ahd_waiting_tid_tail_print
ahd_next_queued_scb_addr_print
ahd_complete_scb_head_print
ahd_complete_scb_dmainprog_head_print
ahd_complete_dma_scb_head_print
ahd_complete_dma_scb_tail_print
ahd_complete_on_qfreeze_head_print
ahd_msg_out_print
ahd_dmaparams_print
ahd_saved_scsiid_print
ahd_saved_lun_print
ahd_qoutfifo_entry_valid_tag_print
ahd_kernel_tqinpos_print
ahd_tqinpos_print
ahd_shared_data_addr_print
ahd_qoutfifo_next_addr_print
ahd_arg_1_print
ahd_arg_2_print
ahd_last_msg_print
ahd_scsiseq_template_print
ahd_initiator_tag_print
ahd_allocfifo_scbptr_print
ahd_int_coalescing_timer_print
ahd_int_coalescing_maxcmds_print
ahd_int_coalescing_mincmds_print
ahd_cmds_pending_print
ahd_int_coalescing_cmdcount_print
ahd_local_hs_mailbox_print
ahd_cmdsize_table_print
ahd_scb_base_print
ahd_scb_residual_datacnt_print
ahd_scb_residual_sgptr_print
ahd_scb_scsi_status_print
ahd_scb_target_phases_print
ahd_scb_target_data_dir_print
ahd_scb_target_itag_print
ahd_scb_sense_busaddr_print
ahd_scb_tag_print
ahd_scb_lun_print
ahd_scb_task_attribute_print
ahd_scb_cdb_len_print
ahd_scb_task_management_print
ahd_scb_dataptr_print
ahd_scb_datacnt_print
ahd_scb_sgptr_print
ahd_scb_busaddr_print
ahd_scb_next_print
ahd_scb_next2_print
ahd_scb_spare_print
ahd_scb_disconnected_lists_print
" | while read name; do
grep "$name" -rc .
done | grep -vF ':0'
I got the following output:
./aic79xx_reg.h_shipped:2
./aic79xx_reg_print.c_shipped:1
./aic79xx_reg.h_shipped:2
./aic79xx_reg_print.c_shipped:1
...
...
which means that these functions are defined but never referenced.
(Yes, patch similarly ifdefs out function definitions in aic79xx_reg_print.c_shipped)
> And in either case the *_shipped files are in fact
> autogenerated by aic assembler, so we need to fix that
> one, too.
I tried this approach. But running aic assembler doesn't seem
to regenerate _shipped files.
I built kernel with the following options and none of the *_shipped
files change (in fact, no source file changes):
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_BUILD_FIRMWARE=y <============
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=8
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_BUILD_FIRMWARE=y <============
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
(full .config is attached)
I also grepped through the directory and found no rules in Makefiles
which regenerate _shipped files.
If you know how to regenerate them, please let me know.
Any other objections to the patch?
--
vda
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 36183 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
# Mon Apr 7 19:46:37 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
# CONFIG_PARIDE_PD is not set
# CONFIG_PARIDE_PCD is not set
# CONFIG_PARIDE_PF is not set
# CONFIG_PARIDE_PT is not set
# CONFIG_PARIDE_PG is not set
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPNP=y
#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_BUILD_FIRMWARE=y
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=8
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_BUILD_FIRMWARE=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SX4=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
# CONFIG_NET_TULIP is not set
CONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
# CONFIG_RTC_DRV_TEST is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/3] debloat aic7xxx and aic79xx drivers
2008-04-07 10:31 ` [PATCH 1/3] " Hannes Reinecke
@ 2008-04-07 18:01 ` Denys Vlasenko
0 siblings, 0 replies; 13+ messages in thread
From: Denys Vlasenko @ 2008-04-07 18:01 UTC (permalink / raw)
To: Hannes Reinecke; +Cc: Andrew Morton, linux-scsi, linux-kernel
On Monday 07 April 2008 12:31, Hannes Reinecke wrote:
> Hi Denys,
>
> Denys Vlasenko wrote:
> > Deinlines and moves big functions from .h to .c files.
> > Adds prototypes for ahc_lookup_scb and ahd_lookup_scb to .h files.
> >
> > Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> > --
> > vda
> Patch looks good to me.
>
> Signed-off-by: Hannes Reinecke <hare@suse.de>
Thanks! Please, queue it up in linux-scsi tree.
--
vda
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/3] debloat aic7xxx and aic79xx drivers
2007-10-14 15:00 ` [PATCH 1/3] " Denys Vlasenko
@ 2007-11-01 22:15 ` Matthew Wilcox
0 siblings, 0 replies; 13+ messages in thread
From: Matthew Wilcox @ 2007-11-01 22:15 UTC (permalink / raw)
To: Denys Vlasenko; +Cc: Andrew Morton, Hannes Reinecke, linux-scsi, linux-kernel
On Sun, Oct 14, 2007 at 04:00:10PM +0100, Denys Vlasenko wrote:
> Deinlines and moves big functions from .h to .c files.
> Adds prototypes for ahc_lookup_scb and ahd_lookup_scb to .h files.
Adds trailing whitespace.
.dotest/patch:216: * We also set the full residual flag which the
Adds trailing whitespace.
.dotest/patch:2383:{
warning: 2 lines add trailing whitespaces.
--
Intel are signing my paycheques ... these opinions are still mine
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/3] debloat aic7xxx and aic79xx drivers
2007-10-14 14:58 [PATCH 0/3] " Denys Vlasenko
@ 2007-10-14 15:00 ` Denys Vlasenko
2007-11-01 22:15 ` Matthew Wilcox
0 siblings, 1 reply; 13+ messages in thread
From: Denys Vlasenko @ 2007-10-14 15:00 UTC (permalink / raw)
To: Andrew Morton; +Cc: Hannes Reinecke, linux-scsi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 188 bytes --]
Deinlines and moves big functions from .h to .c files.
Adds prototypes for ahc_lookup_scb and ahd_lookup_scb to .h files.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
--
vda
[-- Attachment #2: linux-2.6.23-aic-1-debloat.patch --]
[-- Type: text/x-diff, Size: 104906 bytes --]
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic79xx_core.c linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic79xx_core.c
--- linux-2.6.23/drivers/scsi/aic7xxx/aic79xx_core.c 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic79xx_core.c 2007-10-14 15:02:44.000000000 +0100
@@ -266,8 +266,752 @@ static int ahd_match_scb(struct ahd_sof
int target, char channel, int lun,
u_int tag, role_t role);
-/******************************** Private Inlines *****************************/
+/************************ Sequencer Execution Control *************************/
+void
+ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
+{
+ if (ahd->src_mode == src && ahd->dst_mode == dst)
+ return;
+#ifdef AHD_DEBUG
+ if (ahd->src_mode == AHD_MODE_UNKNOWN
+ || ahd->dst_mode == AHD_MODE_UNKNOWN)
+ panic("Setting mode prior to saving it.\n");
+ if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
+ printf("%s: Setting mode 0x%x\n", ahd_name(ahd),
+ ahd_build_mode_state(ahd, src, dst));
+#endif
+ ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst));
+ ahd->src_mode = src;
+ ahd->dst_mode = dst;
+}
+
+void
+ahd_update_modes(struct ahd_softc *ahd)
+{
+ ahd_mode_state mode_ptr;
+ ahd_mode src;
+ ahd_mode dst;
+
+ mode_ptr = ahd_inb(ahd, MODE_PTR);
+#ifdef AHD_DEBUG
+ if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
+ printf("Reading mode 0x%x\n", mode_ptr);
+#endif
+ ahd_extract_mode_state(ahd, mode_ptr, &src, &dst);
+ ahd_known_modes(ahd, src, dst);
+}
+
+void
+ahd_assert_modes(struct ahd_softc *ahd, ahd_mode srcmode,
+ ahd_mode dstmode, const char *file, int line)
+{
+#ifdef AHD_DEBUG
+ if ((srcmode & AHD_MK_MSK(ahd->src_mode)) == 0
+ || (dstmode & AHD_MK_MSK(ahd->dst_mode)) == 0) {
+ panic("%s:%s:%d: Mode assertion failed.\n",
+ ahd_name(ahd), file, line);
+ }
+#endif
+}
+
+#define AHD_ASSERT_MODES(ahd, source, dest) \
+ ahd_assert_modes(ahd, source, dest, __FILE__, __LINE__);
+
+ahd_mode_state
+ahd_save_modes(struct ahd_softc *ahd)
+{
+ if (ahd->src_mode == AHD_MODE_UNKNOWN
+ || ahd->dst_mode == AHD_MODE_UNKNOWN)
+ ahd_update_modes(ahd);
+
+ return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode));
+}
+
+void
+ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state)
+{
+ ahd_mode src;
+ ahd_mode dst;
+
+ ahd_extract_mode_state(ahd, state, &src, &dst);
+ ahd_set_modes(ahd, src, dst);
+}
+
+/*
+ * Determine whether the sequencer has halted code execution.
+ * Returns non-zero status if the sequencer is stopped.
+ */
+int
+ahd_is_paused(struct ahd_softc *ahd)
+{
+ return ((ahd_inb(ahd, HCNTRL) & PAUSE) != 0);
+}
+
+/*
+ * Request that the sequencer stop and wait, indefinitely, for it
+ * to stop. The sequencer will only acknowledge that it is paused
+ * once it has reached an instruction boundary and PAUSEDIS is
+ * cleared in the SEQCTL register. The sequencer may use PAUSEDIS
+ * for critical sections.
+ */
+void
+ahd_pause(struct ahd_softc *ahd)
+{
+ ahd_outb(ahd, HCNTRL, ahd->pause);
+
+ /*
+ * Since the sequencer can disable pausing in a critical section, we
+ * must loop until it actually stops.
+ */
+ while (ahd_is_paused(ahd) == 0)
+ ;
+}
+
+/*
+ * Allow the sequencer to continue program execution.
+ * We check here to ensure that no additional interrupt
+ * sources that would cause the sequencer to halt have been
+ * asserted. If, for example, a SCSI bus reset is detected
+ * while we are fielding a different, pausing, interrupt type,
+ * we don't want to release the sequencer before going back
+ * into our interrupt handler and dealing with this new
+ * condition.
+ */
+void
+ahd_unpause(struct ahd_softc *ahd)
+{
+ /*
+ * Automatically restore our modes to those saved
+ * prior to the first change of the mode.
+ */
+ if (ahd->saved_src_mode != AHD_MODE_UNKNOWN
+ && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) {
+ if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0)
+ ahd_reset_cmds_pending(ahd);
+ ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
+ }
+
+ if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0)
+ ahd_outb(ahd, HCNTRL, ahd->unpause);
+
+ ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN);
+}
+
+/*********************** Scatter Gather List Handling *************************/
+void *
+ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
+ void *sgptr, dma_addr_t addr, bus_size_t len, int last)
+{
+ scb->sg_count++;
+ if (sizeof(dma_addr_t) > 4
+ && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
+ struct ahd_dma64_seg *sg;
+
+ sg = (struct ahd_dma64_seg *)sgptr;
+ sg->addr = ahd_htole64(addr);
+ sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0));
+ return (sg + 1);
+ } else {
+ struct ahd_dma_seg *sg;
+
+ sg = (struct ahd_dma_seg *)sgptr;
+ sg->addr = ahd_htole32(addr & 0xFFFFFFFF);
+ sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000)
+ | (last ? AHD_DMA_LAST_SEG : 0));
+ return (sg + 1);
+ }
+}
+
+void
+ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb)
+{
+ /* XXX Handle target mode SCBs. */
+ scb->crc_retry_count = 0;
+ if ((scb->flags & SCB_PACKETIZED) != 0) {
+ /* XXX what about ACA?? It is type 4, but TAG_TYPE == 0x3. */
+ scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE;
+ } else {
+ if (ahd_get_transfer_length(scb) & 0x01)
+ scb->hscb->task_attribute = SCB_XFERLEN_ODD;
+ else
+ scb->hscb->task_attribute = 0;
+ }
+
+ if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR
+ || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0)
+ scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr =
+ ahd_htole32(scb->sense_busaddr);
+}
+
+void
+ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb)
+{
+ /*
+ * Copy the first SG into the "current" data ponter area.
+ */
+ if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
+ struct ahd_dma64_seg *sg;
+
+ sg = (struct ahd_dma64_seg *)scb->sg_list;
+ scb->hscb->dataptr = sg->addr;
+ scb->hscb->datacnt = sg->len;
+ } else {
+ struct ahd_dma_seg *sg;
+ uint32_t *dataptr_words;
+
+ sg = (struct ahd_dma_seg *)scb->sg_list;
+ dataptr_words = (uint32_t*)&scb->hscb->dataptr;
+ dataptr_words[0] = sg->addr;
+ dataptr_words[1] = 0;
+ if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
+ uint64_t high_addr;
+
+ high_addr = ahd_le32toh(sg->len) & 0x7F000000;
+ scb->hscb->dataptr |= ahd_htole64(high_addr << 8);
+ }
+ scb->hscb->datacnt = sg->len;
+ }
+ /*
+ * Note where to find the SG entries in bus space.
+ * We also set the full residual flag which the
+ * sequencer will clear as soon as a data transfer
+ * occurs.
+ */
+ scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID);
+}
+
+void
+ahd_setup_noxfer_scb(struct ahd_softc *ahd, struct scb *scb)
+{
+ scb->hscb->sgptr = ahd_htole32(SG_LIST_NULL);
+ scb->hscb->dataptr = 0;
+ scb->hscb->datacnt = 0;
+}
+
+/************************** Memory mapping routines ***************************/
+void *
+ahd_sg_bus_to_virt(struct ahd_softc *ahd, struct scb *scb, uint32_t sg_busaddr)
+{
+ dma_addr_t sg_offset;
+
+ /* sg_list_phys points to entry 1, not 0 */
+ sg_offset = sg_busaddr - (scb->sg_list_busaddr - ahd_sg_size(ahd));
+ return ((uint8_t *)scb->sg_list + sg_offset);
+}
+
+uint32_t
+ahd_sg_virt_to_bus(struct ahd_softc *ahd, struct scb *scb, void *sg)
+{
+ dma_addr_t sg_offset;
+
+ /* sg_list_phys points to entry 1, not 0 */
+ sg_offset = ((uint8_t *)sg - (uint8_t *)scb->sg_list)
+ - ahd_sg_size(ahd);
+
+ return (scb->sg_list_busaddr + sg_offset);
+}
+
+void
+ahd_sync_scb(struct ahd_softc *ahd, struct scb *scb, int op)
+{
+ ahd_dmamap_sync(ahd, ahd->scb_data.hscb_dmat,
+ scb->hscb_map->dmamap,
+ /*offset*/(uint8_t*)scb->hscb - scb->hscb_map->vaddr,
+ /*len*/sizeof(*scb->hscb), op);
+}
+
+void
+ahd_sync_sglist(struct ahd_softc *ahd, struct scb *scb, int op)
+{
+ if (scb->sg_count == 0)
+ return;
+
+ ahd_dmamap_sync(ahd, ahd->scb_data.sg_dmat,
+ scb->sg_map->dmamap,
+ /*offset*/scb->sg_list_busaddr - ahd_sg_size(ahd),
+ /*len*/ahd_sg_size(ahd) * scb->sg_count, op);
+}
+
+void
+ahd_sync_sense(struct ahd_softc *ahd, struct scb *scb, int op)
+{
+ ahd_dmamap_sync(ahd, ahd->scb_data.sense_dmat,
+ scb->sense_map->dmamap,
+ /*offset*/scb->sense_busaddr,
+ /*len*/AHD_SENSE_BUFSIZE, op);
+}
+
+uint32_t
+ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index)
+{
+ return (((uint8_t *)&ahd->targetcmds[index])
+ - (uint8_t *)ahd->qoutfifo);
+}
+
+/*********************** Miscelaneous Support Functions ***********************/
+/*
+ * Return pointers to the transfer negotiation information
+ * for the specified our_id/remote_id pair.
+ */
+struct ahd_initiator_tinfo *
+ahd_fetch_transinfo(struct ahd_softc *ahd, char channel, u_int our_id,
+ u_int remote_id, struct ahd_tmode_tstate **tstate)
+{
+ /*
+ * Transfer data structures are stored from the perspective
+ * of the target role. Since the parameters for a connection
+ * in the initiator role to a given target are the same as
+ * when the roles are reversed, we pretend we are the target.
+ */
+ if (channel == 'B')
+ our_id += 8;
+ *tstate = ahd->enabled_targets[our_id];
+ return (&(*tstate)->transinfo[remote_id]);
+}
+
+uint16_t
+ahd_inw(struct ahd_softc *ahd, u_int port)
+{
+ /*
+ * Read high byte first as some registers increment
+ * or have other side effects when the low byte is
+ * read.
+ */
+ uint16_t r = ahd_inb(ahd, port+1) << 8;
+ return r | ahd_inb(ahd, port);
+}
+
+void
+ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
+{
+ /*
+ * Write low byte first to accomodate registers
+ * such as PRGMCNT where the order maters.
+ */
+ ahd_outb(ahd, port, value & 0xFF);
+ ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
+}
+
+uint32_t
+ahd_inl(struct ahd_softc *ahd, u_int port)
+{
+ return ((ahd_inb(ahd, port))
+ | (ahd_inb(ahd, port+1) << 8)
+ | (ahd_inb(ahd, port+2) << 16)
+ | (ahd_inb(ahd, port+3) << 24));
+}
+
+void
+ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value)
+{
+ ahd_outb(ahd, port, (value) & 0xFF);
+ ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF);
+ ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF);
+ ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF);
+}
+
+uint64_t
+ahd_inq(struct ahd_softc *ahd, u_int port)
+{
+ return ((ahd_inb(ahd, port))
+ | (ahd_inb(ahd, port+1) << 8)
+ | (ahd_inb(ahd, port+2) << 16)
+ | (ahd_inb(ahd, port+3) << 24)
+ | (((uint64_t)ahd_inb(ahd, port+4)) << 32)
+ | (((uint64_t)ahd_inb(ahd, port+5)) << 40)
+ | (((uint64_t)ahd_inb(ahd, port+6)) << 48)
+ | (((uint64_t)ahd_inb(ahd, port+7)) << 56));
+}
+
+void
+ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value)
+{
+ ahd_outb(ahd, port, value & 0xFF);
+ ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
+ ahd_outb(ahd, port+2, (value >> 16) & 0xFF);
+ ahd_outb(ahd, port+3, (value >> 24) & 0xFF);
+ ahd_outb(ahd, port+4, (value >> 32) & 0xFF);
+ ahd_outb(ahd, port+5, (value >> 40) & 0xFF);
+ ahd_outb(ahd, port+6, (value >> 48) & 0xFF);
+ ahd_outb(ahd, port+7, (value >> 56) & 0xFF);
+}
+
+u_int
+ahd_get_scbptr(struct ahd_softc *ahd)
+{
+ AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
+ ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
+ return (ahd_inb(ahd, SCBPTR) | (ahd_inb(ahd, SCBPTR + 1) << 8));
+}
+
+void
+ahd_set_scbptr(struct ahd_softc *ahd, u_int scbptr)
+{
+ AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
+ ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
+ ahd_outb(ahd, SCBPTR, scbptr & 0xFF);
+ ahd_outb(ahd, SCBPTR+1, (scbptr >> 8) & 0xFF);
+}
+
+u_int
+ahd_get_hnscb_qoff(struct ahd_softc *ahd)
+{
+ return (ahd_inw_atomic(ahd, HNSCB_QOFF));
+}
+
+void
+ahd_set_hnscb_qoff(struct ahd_softc *ahd, u_int value)
+{
+ ahd_outw_atomic(ahd, HNSCB_QOFF, value);
+}
+
+u_int
+ahd_get_hescb_qoff(struct ahd_softc *ahd)
+{
+ return (ahd_inb(ahd, HESCB_QOFF));
+}
+
+void
+ahd_set_hescb_qoff(struct ahd_softc *ahd, u_int value)
+{
+ ahd_outb(ahd, HESCB_QOFF, value);
+}
+
+u_int
+ahd_get_snscb_qoff(struct ahd_softc *ahd)
+{
+ u_int oldvalue;
+
+ AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
+ oldvalue = ahd_inw(ahd, SNSCB_QOFF);
+ ahd_outw(ahd, SNSCB_QOFF, oldvalue);
+ return (oldvalue);
+}
+
+void
+ahd_set_snscb_qoff(struct ahd_softc *ahd, u_int value)
+{
+ AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
+ ahd_outw(ahd, SNSCB_QOFF, value);
+}
+
+u_int
+ahd_get_sescb_qoff(struct ahd_softc *ahd)
+{
+ AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
+ return (ahd_inb(ahd, SESCB_QOFF));
+}
+
+void
+ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value)
+{
+ AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
+ ahd_outb(ahd, SESCB_QOFF, value);
+}
+
+u_int
+ahd_get_sdscb_qoff(struct ahd_softc *ahd)
+{
+ AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
+ return (ahd_inb(ahd, SDSCB_QOFF) | (ahd_inb(ahd, SDSCB_QOFF + 1) << 8));
+}
+
+void
+ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value)
+{
+ AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
+ ahd_outb(ahd, SDSCB_QOFF, value & 0xFF);
+ ahd_outb(ahd, SDSCB_QOFF+1, (value >> 8) & 0xFF);
+}
+
+u_int
+ahd_inb_scbram(struct ahd_softc *ahd, u_int offset)
+{
+ u_int value;
+ /*
+ * Workaround PCI-X Rev A. hardware bug.
+ * After a host read of SCB memory, the chip
+ * may become confused into thinking prefetch
+ * was required. This starts the discard timer
+ * running and can cause an unexpected discard
+ * timer interrupt. The work around is to read
+ * a normal register prior to the exhaustion of
+ * the discard timer. The mode pointer register
+ * has no side effects and so serves well for
+ * this purpose.
+ *
+ * Razor #528
+ */
+ value = ahd_inb(ahd, offset);
+ if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0)
+ ahd_inb(ahd, MODE_PTR);
+ return (value);
+}
+
+u_int
+ahd_inw_scbram(struct ahd_softc *ahd, u_int offset)
+{
+ return (ahd_inb_scbram(ahd, offset)
+ | (ahd_inb_scbram(ahd, offset+1) << 8));
+}
+
+uint32_t
+ahd_inl_scbram(struct ahd_softc *ahd, u_int offset)
+{
+ return (ahd_inw_scbram(ahd, offset)
+ | (ahd_inw_scbram(ahd, offset+2) << 16));
+}
+
+uint64_t
+ahd_inq_scbram(struct ahd_softc *ahd, u_int offset)
+{
+ return (ahd_inl_scbram(ahd, offset)
+ | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32);
+}
+
+struct scb *
+ahd_lookup_scb(struct ahd_softc *ahd, u_int tag)
+{
+ struct scb* scb;
+
+ if (tag >= AHD_SCB_MAX)
+ return (NULL);
+ scb = ahd->scb_data.scbindex[tag];
+ if (scb != NULL)
+ ahd_sync_scb(ahd, scb,
+ BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
+ return (scb);
+}
+
+void
+ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb)
+{
+ struct hardware_scb *q_hscb;
+ struct map_node *q_hscb_map;
+ uint32_t saved_hscb_busaddr;
+
+ /*
+ * Our queuing method is a bit tricky. The card
+ * knows in advance which HSCB (by address) to download,
+ * and we can't disappoint it. To achieve this, the next
+ * HSCB to download is saved off in ahd->next_queued_hscb.
+ * When we are called to queue "an arbitrary scb",
+ * we copy the contents of the incoming HSCB to the one
+ * the sequencer knows about, swap HSCB pointers and
+ * finally assign the SCB to the tag indexed location
+ * in the scb_array. This makes sure that we can still
+ * locate the correct SCB by SCB_TAG.
+ */
+ q_hscb = ahd->next_queued_hscb;
+ q_hscb_map = ahd->next_queued_hscb_map;
+ saved_hscb_busaddr = q_hscb->hscb_busaddr;
+ memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
+ q_hscb->hscb_busaddr = saved_hscb_busaddr;
+ q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
+
+ /* Now swap HSCB pointers. */
+ ahd->next_queued_hscb = scb->hscb;
+ ahd->next_queued_hscb_map = scb->hscb_map;
+ scb->hscb = q_hscb;
+ scb->hscb_map = q_hscb_map;
+
+ /* Now define the mapping from tag to SCB in the scbindex */
+ ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
+}
+
+/*
+ * Tell the sequencer about a new transaction to execute.
+ */
+void
+ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb)
+{
+ ahd_swap_with_next_hscb(ahd, scb);
+
+ if (SCBID_IS_NULL(SCB_GET_TAG(scb)))
+ panic("Attempt to queue invalid SCB tag %x\n",
+ SCB_GET_TAG(scb));
+
+ /*
+ * Keep a history of SCBs we've downloaded in the qinfifo.
+ */
+ ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
+ ahd->qinfifonext++;
+
+ if (scb->sg_count != 0)
+ ahd_setup_data_scb(ahd, scb);
+ else
+ ahd_setup_noxfer_scb(ahd, scb);
+ ahd_setup_scb_common(ahd, scb);
+
+ /*
+ * Make sure our data is consistent from the
+ * perspective of the adapter.
+ */
+ ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+
+#ifdef AHD_DEBUG
+ if ((ahd_debug & AHD_SHOW_QUEUE) != 0) {
+ uint64_t host_dataptr;
+
+ host_dataptr = ahd_le64toh(scb->hscb->dataptr);
+ printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
+ ahd_name(ahd),
+ SCB_GET_TAG(scb), scb->hscb->scsiid,
+ ahd_le32toh(scb->hscb->hscb_busaddr),
+ (u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
+ (u_int)(host_dataptr & 0xFFFFFFFF),
+ ahd_le32toh(scb->hscb->datacnt));
+ }
+#endif
+ /* Tell the adapter about the newly queued SCB */
+ ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
+}
+
+/************************** Interrupt Processing ******************************/
+void
+ahd_sync_qoutfifo(struct ahd_softc *ahd, int op)
+{
+ ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
+ /*offset*/0,
+ /*len*/AHD_SCB_MAX * sizeof(struct ahd_completion), op);
+}
+
+void
+ahd_sync_tqinfifo(struct ahd_softc *ahd, int op)
+{
+#ifdef AHD_TARGET_MODE
+ if ((ahd->flags & AHD_TARGETROLE) != 0) {
+ ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
+ ahd->shared_data_map.dmamap,
+ ahd_targetcmd_offset(ahd, 0),
+ sizeof(struct target_cmd) * AHD_TMODE_CMDS,
+ op);
+ }
+#endif
+}
+
+/*
+ * See if the firmware has posted any completed commands
+ * into our in-core command complete fifos.
+ */
+#define AHD_RUN_QOUTFIFO 0x1
+#define AHD_RUN_TQINFIFO 0x2
+u_int
+ahd_check_cmdcmpltqueues(struct ahd_softc *ahd)
+{
+ u_int retval;
+
+ retval = 0;
+ ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
+ /*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo),
+ /*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD);
+ if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag
+ == ahd->qoutfifonext_valid_tag)
+ retval |= AHD_RUN_QOUTFIFO;
+#ifdef AHD_TARGET_MODE
+ if ((ahd->flags & AHD_TARGETROLE) != 0
+ && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) {
+ ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
+ ahd->shared_data_map.dmamap,
+ ahd_targetcmd_offset(ahd, ahd->tqinfifofnext),
+ /*len*/sizeof(struct target_cmd),
+ BUS_DMASYNC_POSTREAD);
+ if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0)
+ retval |= AHD_RUN_TQINFIFO;
+ }
+#endif
+ return (retval);
+}
+
+/*
+ * Catch an interrupt from the adapter
+ */
+int
+ahd_intr(struct ahd_softc *ahd)
+{
+ u_int intstat;
+
+ if ((ahd->pause & INTEN) == 0) {
+ /*
+ * Our interrupt is not enabled on the chip
+ * and may be disabled for re-entrancy reasons,
+ * so just return. This is likely just a shared
+ * interrupt.
+ */
+ return (0);
+ }
+
+ /*
+ * Instead of directly reading the interrupt status register,
+ * infer the cause of the interrupt by checking our in-core
+ * completion queues. This avoids a costly PCI bus read in
+ * most cases.
+ */
+ if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0
+ && (ahd_check_cmdcmpltqueues(ahd) != 0))
+ intstat = CMDCMPLT;
+ else
+ intstat = ahd_inb(ahd, INTSTAT);
+
+ if ((intstat & INT_PEND) == 0)
+ return (0);
+
+ if (intstat & CMDCMPLT) {
+ ahd_outb(ahd, CLRINT, CLRCMDINT);
+
+ /*
+ * Ensure that the chip sees that we've cleared
+ * this interrupt before we walk the output fifo.
+ * Otherwise, we may, due to posted bus writes,
+ * clear the interrupt after we finish the scan,
+ * and after the sequencer has added new entries
+ * and asserted the interrupt again.
+ */
+ if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
+ if (ahd_is_paused(ahd)) {
+ /*
+ * Potentially lost SEQINT.
+ * If SEQINTCODE is non-zero,
+ * simulate the SEQINT.
+ */
+ if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT)
+ intstat |= SEQINT;
+ }
+ } else {
+ ahd_flush_device_writes(ahd);
+ }
+ ahd_run_qoutfifo(ahd);
+ ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++;
+ ahd->cmdcmplt_total++;
+#ifdef AHD_TARGET_MODE
+ if ((ahd->flags & AHD_TARGETROLE) != 0)
+ ahd_run_tqinfifo(ahd, /*paused*/FALSE);
+#endif
+ }
+
+ /*
+ * Handle statuses that may invalidate our cached
+ * copy of INTSTAT separately.
+ */
+ if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) {
+ /* Hot eject. Do nothing */
+ } else if (intstat & HWERRINT) {
+ ahd_handle_hwerrint(ahd);
+ } else if ((intstat & (PCIINT|SPLTINT)) != 0) {
+ ahd->bus_intr(ahd);
+ } else {
+
+ if ((intstat & SEQINT) != 0)
+ ahd_handle_seqint(ahd, intstat);
+
+ if ((intstat & SCSIINT) != 0)
+ ahd_handle_scsiint(ahd, intstat);
+ }
+ return (1);
+}
+
+/******************************** Private Inlines *****************************/
static __inline void
ahd_assert_atn(struct ahd_softc *ahd)
{
@@ -280,7 +1024,7 @@ ahd_assert_atn(struct ahd_softc *ahd)
* are currently in a packetized transfer. We could
* just as easily be sending or receiving a message.
*/
-static __inline int
+static int
ahd_currently_packetized(struct ahd_softc *ahd)
{
ahd_mode_state saved_modes;
@@ -6272,6 +7016,24 @@ static const char *termstat_strings[] =
"Not Configured"
};
+/***************************** Timer Facilities *******************************/
+#define ahd_timer_init init_timer
+#define ahd_timer_stop del_timer_sync
+typedef void ahd_linux_callback_t (u_long);
+
+static void
+ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
+{
+ struct ahd_softc *ahd;
+
+ ahd = (struct ahd_softc *)arg;
+ del_timer(timer);
+ timer->data = (u_long)arg;
+ timer->expires = jiffies + (usec * HZ)/1000000;
+ timer->function = (ahd_linux_callback_t*)func;
+ add_timer(timer);
+}
+
/*
* Start the board, ready for normal operation
*/
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic79xx_inline.h linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic79xx_inline.h
--- linux-2.6.23/drivers/scsi/aic7xxx/aic79xx_inline.h 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic79xx_inline.h 2007-10-14 15:02:44.000000000 +0100
@@ -63,18 +63,19 @@ static __inline ahd_mode_state ahd_build
static __inline void ahd_extract_mode_state(struct ahd_softc *ahd,
ahd_mode_state state,
ahd_mode *src, ahd_mode *dst);
-static __inline void ahd_set_modes(struct ahd_softc *ahd, ahd_mode src,
- ahd_mode dst);
-static __inline void ahd_update_modes(struct ahd_softc *ahd);
-static __inline void ahd_assert_modes(struct ahd_softc *ahd, ahd_mode srcmode,
- ahd_mode dstmode, const char *file,
- int line);
-static __inline ahd_mode_state ahd_save_modes(struct ahd_softc *ahd);
-static __inline void ahd_restore_modes(struct ahd_softc *ahd,
- ahd_mode_state state);
-static __inline int ahd_is_paused(struct ahd_softc *ahd);
-static __inline void ahd_pause(struct ahd_softc *ahd);
-static __inline void ahd_unpause(struct ahd_softc *ahd);
+
+void ahd_set_modes(struct ahd_softc *ahd, ahd_mode src,
+ ahd_mode dst);
+void ahd_update_modes(struct ahd_softc *ahd);
+void ahd_assert_modes(struct ahd_softc *ahd, ahd_mode srcmode,
+ ahd_mode dstmode, const char *file,
+ int line);
+ahd_mode_state ahd_save_modes(struct ahd_softc *ahd);
+void ahd_restore_modes(struct ahd_softc *ahd,
+ ahd_mode_state state);
+int ahd_is_paused(struct ahd_softc *ahd);
+void ahd_pause(struct ahd_softc *ahd);
+void ahd_unpause(struct ahd_softc *ahd);
static __inline void
ahd_known_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
@@ -99,256 +100,37 @@ ahd_extract_mode_state(struct ahd_softc
*dst = (state & DST_MODE) >> DST_MODE_SHIFT;
}
-static __inline void
-ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
-{
- if (ahd->src_mode == src && ahd->dst_mode == dst)
- return;
-#ifdef AHD_DEBUG
- if (ahd->src_mode == AHD_MODE_UNKNOWN
- || ahd->dst_mode == AHD_MODE_UNKNOWN)
- panic("Setting mode prior to saving it.\n");
- if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
- printf("%s: Setting mode 0x%x\n", ahd_name(ahd),
- ahd_build_mode_state(ahd, src, dst));
-#endif
- ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst));
- ahd->src_mode = src;
- ahd->dst_mode = dst;
-}
-
-static __inline void
-ahd_update_modes(struct ahd_softc *ahd)
-{
- ahd_mode_state mode_ptr;
- ahd_mode src;
- ahd_mode dst;
-
- mode_ptr = ahd_inb(ahd, MODE_PTR);
-#ifdef AHD_DEBUG
- if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
- printf("Reading mode 0x%x\n", mode_ptr);
-#endif
- ahd_extract_mode_state(ahd, mode_ptr, &src, &dst);
- ahd_known_modes(ahd, src, dst);
-}
-
-static __inline void
-ahd_assert_modes(struct ahd_softc *ahd, ahd_mode srcmode,
- ahd_mode dstmode, const char *file, int line)
-{
-#ifdef AHD_DEBUG
- if ((srcmode & AHD_MK_MSK(ahd->src_mode)) == 0
- || (dstmode & AHD_MK_MSK(ahd->dst_mode)) == 0) {
- panic("%s:%s:%d: Mode assertion failed.\n",
- ahd_name(ahd), file, line);
- }
-#endif
-}
-
-static __inline ahd_mode_state
-ahd_save_modes(struct ahd_softc *ahd)
-{
- if (ahd->src_mode == AHD_MODE_UNKNOWN
- || ahd->dst_mode == AHD_MODE_UNKNOWN)
- ahd_update_modes(ahd);
-
- return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode));
-}
-
-static __inline void
-ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state)
-{
- ahd_mode src;
- ahd_mode dst;
-
- ahd_extract_mode_state(ahd, state, &src, &dst);
- ahd_set_modes(ahd, src, dst);
-}
-
-#define AHD_ASSERT_MODES(ahd, source, dest) \
- ahd_assert_modes(ahd, source, dest, __FILE__, __LINE__);
-
-/*
- * Determine whether the sequencer has halted code execution.
- * Returns non-zero status if the sequencer is stopped.
- */
-static __inline int
-ahd_is_paused(struct ahd_softc *ahd)
-{
- return ((ahd_inb(ahd, HCNTRL) & PAUSE) != 0);
-}
-
-/*
- * Request that the sequencer stop and wait, indefinitely, for it
- * to stop. The sequencer will only acknowledge that it is paused
- * once it has reached an instruction boundary and PAUSEDIS is
- * cleared in the SEQCTL register. The sequencer may use PAUSEDIS
- * for critical sections.
- */
-static __inline void
-ahd_pause(struct ahd_softc *ahd)
-{
- ahd_outb(ahd, HCNTRL, ahd->pause);
-
- /*
- * Since the sequencer can disable pausing in a critical section, we
- * must loop until it actually stops.
- */
- while (ahd_is_paused(ahd) == 0)
- ;
-}
-
-/*
- * Allow the sequencer to continue program execution.
- * We check here to ensure that no additional interrupt
- * sources that would cause the sequencer to halt have been
- * asserted. If, for example, a SCSI bus reset is detected
- * while we are fielding a different, pausing, interrupt type,
- * we don't want to release the sequencer before going back
- * into our interrupt handler and dealing with this new
- * condition.
- */
-static __inline void
-ahd_unpause(struct ahd_softc *ahd)
-{
- /*
- * Automatically restore our modes to those saved
- * prior to the first change of the mode.
- */
- if (ahd->saved_src_mode != AHD_MODE_UNKNOWN
- && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) {
- if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0)
- ahd_reset_cmds_pending(ahd);
- ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
- }
-
- if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0)
- ahd_outb(ahd, HCNTRL, ahd->unpause);
-
- ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN);
-}
-
/*********************** Scatter Gather List Handling *************************/
-static __inline void *ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
- void *sgptr, dma_addr_t addr,
- bus_size_t len, int last);
-static __inline void ahd_setup_scb_common(struct ahd_softc *ahd,
- struct scb *scb);
-static __inline void ahd_setup_data_scb(struct ahd_softc *ahd,
- struct scb *scb);
-static __inline void ahd_setup_noxfer_scb(struct ahd_softc *ahd,
- struct scb *scb);
-
-static __inline void *
-ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
- void *sgptr, dma_addr_t addr, bus_size_t len, int last)
-{
- scb->sg_count++;
- if (sizeof(dma_addr_t) > 4
- && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
- struct ahd_dma64_seg *sg;
-
- sg = (struct ahd_dma64_seg *)sgptr;
- sg->addr = ahd_htole64(addr);
- sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0));
- return (sg + 1);
- } else {
- struct ahd_dma_seg *sg;
-
- sg = (struct ahd_dma_seg *)sgptr;
- sg->addr = ahd_htole32(addr & 0xFFFFFFFF);
- sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000)
- | (last ? AHD_DMA_LAST_SEG : 0));
- return (sg + 1);
- }
-}
-
-static __inline void
-ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb)
-{
- /* XXX Handle target mode SCBs. */
- scb->crc_retry_count = 0;
- if ((scb->flags & SCB_PACKETIZED) != 0) {
- /* XXX what about ACA?? It is type 4, but TAG_TYPE == 0x3. */
- scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE;
- } else {
- if (ahd_get_transfer_length(scb) & 0x01)
- scb->hscb->task_attribute = SCB_XFERLEN_ODD;
- else
- scb->hscb->task_attribute = 0;
- }
-
- if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR
- || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0)
- scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr =
- ahd_htole32(scb->sense_busaddr);
-}
-
-static __inline void
-ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb)
-{
- /*
- * Copy the first SG into the "current" data ponter area.
- */
- if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
- struct ahd_dma64_seg *sg;
-
- sg = (struct ahd_dma64_seg *)scb->sg_list;
- scb->hscb->dataptr = sg->addr;
- scb->hscb->datacnt = sg->len;
- } else {
- struct ahd_dma_seg *sg;
- uint32_t *dataptr_words;
-
- sg = (struct ahd_dma_seg *)scb->sg_list;
- dataptr_words = (uint32_t*)&scb->hscb->dataptr;
- dataptr_words[0] = sg->addr;
- dataptr_words[1] = 0;
- if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
- uint64_t high_addr;
-
- high_addr = ahd_le32toh(sg->len) & 0x7F000000;
- scb->hscb->dataptr |= ahd_htole64(high_addr << 8);
- }
- scb->hscb->datacnt = sg->len;
- }
- /*
- * Note where to find the SG entries in bus space.
- * We also set the full residual flag which the
- * sequencer will clear as soon as a data transfer
- * occurs.
- */
- scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID);
-}
-
-static __inline void
-ahd_setup_noxfer_scb(struct ahd_softc *ahd, struct scb *scb)
-{
- scb->hscb->sgptr = ahd_htole32(SG_LIST_NULL);
- scb->hscb->dataptr = 0;
- scb->hscb->datacnt = 0;
-}
+void *ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
+ void *sgptr, dma_addr_t addr,
+ bus_size_t len, int last);
+void ahd_setup_scb_common(struct ahd_softc *ahd,
+ struct scb *scb);
+void ahd_setup_data_scb(struct ahd_softc *ahd,
+ struct scb *scb);
+void ahd_setup_noxfer_scb(struct ahd_softc *ahd,
+ struct scb *scb);
/************************** Memory mapping routines ***************************/
static __inline size_t ahd_sg_size(struct ahd_softc *ahd);
-static __inline void *
- ahd_sg_bus_to_virt(struct ahd_softc *ahd,
- struct scb *scb,
- uint32_t sg_busaddr);
-static __inline uint32_t
- ahd_sg_virt_to_bus(struct ahd_softc *ahd,
- struct scb *scb,
- void *sg);
-static __inline void ahd_sync_scb(struct ahd_softc *ahd,
- struct scb *scb, int op);
-static __inline void ahd_sync_sglist(struct ahd_softc *ahd,
- struct scb *scb, int op);
-static __inline void ahd_sync_sense(struct ahd_softc *ahd,
- struct scb *scb, int op);
-static __inline uint32_t
- ahd_targetcmd_offset(struct ahd_softc *ahd,
- u_int index);
+
+void *
+ ahd_sg_bus_to_virt(struct ahd_softc *ahd,
+ struct scb *scb,
+ uint32_t sg_busaddr);
+uint32_t
+ ahd_sg_virt_to_bus(struct ahd_softc *ahd,
+ struct scb *scb,
+ void *sg);
+void ahd_sync_scb(struct ahd_softc *ahd,
+ struct scb *scb, int op);
+void ahd_sync_sglist(struct ahd_softc *ahd,
+ struct scb *scb, int op);
+void ahd_sync_sense(struct ahd_softc *ahd,
+ struct scb *scb, int op);
+uint32_t
+ ahd_targetcmd_offset(struct ahd_softc *ahd,
+ u_int index);
static __inline size_t
ahd_sg_size(struct ahd_softc *ahd)
@@ -358,104 +140,48 @@ ahd_sg_size(struct ahd_softc *ahd)
return (sizeof(struct ahd_dma_seg));
}
-static __inline void *
-ahd_sg_bus_to_virt(struct ahd_softc *ahd, struct scb *scb, uint32_t sg_busaddr)
-{
- dma_addr_t sg_offset;
-
- /* sg_list_phys points to entry 1, not 0 */
- sg_offset = sg_busaddr - (scb->sg_list_busaddr - ahd_sg_size(ahd));
- return ((uint8_t *)scb->sg_list + sg_offset);
-}
-
-static __inline uint32_t
-ahd_sg_virt_to_bus(struct ahd_softc *ahd, struct scb *scb, void *sg)
-{
- dma_addr_t sg_offset;
-
- /* sg_list_phys points to entry 1, not 0 */
- sg_offset = ((uint8_t *)sg - (uint8_t *)scb->sg_list)
- - ahd_sg_size(ahd);
-
- return (scb->sg_list_busaddr + sg_offset);
-}
-
-static __inline void
-ahd_sync_scb(struct ahd_softc *ahd, struct scb *scb, int op)
-{
- ahd_dmamap_sync(ahd, ahd->scb_data.hscb_dmat,
- scb->hscb_map->dmamap,
- /*offset*/(uint8_t*)scb->hscb - scb->hscb_map->vaddr,
- /*len*/sizeof(*scb->hscb), op);
-}
-
-static __inline void
-ahd_sync_sglist(struct ahd_softc *ahd, struct scb *scb, int op)
-{
- if (scb->sg_count == 0)
- return;
-
- ahd_dmamap_sync(ahd, ahd->scb_data.sg_dmat,
- scb->sg_map->dmamap,
- /*offset*/scb->sg_list_busaddr - ahd_sg_size(ahd),
- /*len*/ahd_sg_size(ahd) * scb->sg_count, op);
-}
-
-static __inline void
-ahd_sync_sense(struct ahd_softc *ahd, struct scb *scb, int op)
-{
- ahd_dmamap_sync(ahd, ahd->scb_data.sense_dmat,
- scb->sense_map->dmamap,
- /*offset*/scb->sense_busaddr,
- /*len*/AHD_SENSE_BUFSIZE, op);
-}
-
-static __inline uint32_t
-ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index)
-{
- return (((uint8_t *)&ahd->targetcmds[index])
- - (uint8_t *)ahd->qoutfifo);
-}
-
/*********************** Miscelaneous Support Functions ***********************/
-static __inline struct ahd_initiator_tinfo *
- ahd_fetch_transinfo(struct ahd_softc *ahd,
- char channel, u_int our_id,
- u_int remote_id,
- struct ahd_tmode_tstate **tstate);
-static __inline uint16_t
- ahd_inw(struct ahd_softc *ahd, u_int port);
-static __inline void ahd_outw(struct ahd_softc *ahd, u_int port,
- u_int value);
-static __inline uint32_t
- ahd_inl(struct ahd_softc *ahd, u_int port);
-static __inline void ahd_outl(struct ahd_softc *ahd, u_int port,
- uint32_t value);
-static __inline uint64_t
- ahd_inq(struct ahd_softc *ahd, u_int port);
-static __inline void ahd_outq(struct ahd_softc *ahd, u_int port,
- uint64_t value);
-static __inline u_int ahd_get_scbptr(struct ahd_softc *ahd);
-static __inline void ahd_set_scbptr(struct ahd_softc *ahd, u_int scbptr);
-static __inline u_int ahd_get_hnscb_qoff(struct ahd_softc *ahd);
-static __inline void ahd_set_hnscb_qoff(struct ahd_softc *ahd, u_int value);
-static __inline u_int ahd_get_hescb_qoff(struct ahd_softc *ahd);
-static __inline void ahd_set_hescb_qoff(struct ahd_softc *ahd, u_int value);
-static __inline u_int ahd_get_snscb_qoff(struct ahd_softc *ahd);
-static __inline void ahd_set_snscb_qoff(struct ahd_softc *ahd, u_int value);
-static __inline u_int ahd_get_sescb_qoff(struct ahd_softc *ahd);
-static __inline void ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value);
-static __inline u_int ahd_get_sdscb_qoff(struct ahd_softc *ahd);
-static __inline void ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value);
-static __inline u_int ahd_inb_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline u_int ahd_inw_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline uint32_t
- ahd_inl_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline uint64_t
- ahd_inq_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline void ahd_swap_with_next_hscb(struct ahd_softc *ahd,
- struct scb *scb);
-static __inline void ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb);
+struct ahd_initiator_tinfo *
+ ahd_fetch_transinfo(struct ahd_softc *ahd,
+ char channel, u_int our_id,
+ u_int remote_id,
+ struct ahd_tmode_tstate **tstate);
+uint16_t
+ ahd_inw(struct ahd_softc *ahd, u_int port);
+void ahd_outw(struct ahd_softc *ahd, u_int port,
+ u_int value);
+uint32_t
+ ahd_inl(struct ahd_softc *ahd, u_int port);
+void ahd_outl(struct ahd_softc *ahd, u_int port,
+ uint32_t value);
+uint64_t
+ ahd_inq(struct ahd_softc *ahd, u_int port);
+void ahd_outq(struct ahd_softc *ahd, u_int port,
+ uint64_t value);
+u_int ahd_get_scbptr(struct ahd_softc *ahd);
+void ahd_set_scbptr(struct ahd_softc *ahd, u_int scbptr);
+u_int ahd_get_hnscb_qoff(struct ahd_softc *ahd);
+void ahd_set_hnscb_qoff(struct ahd_softc *ahd, u_int value);
+u_int ahd_get_hescb_qoff(struct ahd_softc *ahd);
+void ahd_set_hescb_qoff(struct ahd_softc *ahd, u_int value);
+u_int ahd_get_snscb_qoff(struct ahd_softc *ahd);
+void ahd_set_snscb_qoff(struct ahd_softc *ahd, u_int value);
+u_int ahd_get_sescb_qoff(struct ahd_softc *ahd);
+void ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value);
+u_int ahd_get_sdscb_qoff(struct ahd_softc *ahd);
+void ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value);
+u_int ahd_inb_scbram(struct ahd_softc *ahd, u_int offset);
+u_int ahd_inw_scbram(struct ahd_softc *ahd, u_int offset);
+uint32_t
+ ahd_inl_scbram(struct ahd_softc *ahd, u_int offset);
+uint64_t
+ ahd_inq_scbram(struct ahd_softc *ahd, u_int offset);
+struct scb *
+ ahd_lookup_scb(struct ahd_softc *ahd, u_int tag);
+void ahd_swap_with_next_hscb(struct ahd_softc *ahd,
+ struct scb *scb);
+void ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb);
+
static __inline uint8_t *
ahd_get_sense_buf(struct ahd_softc *ahd,
struct scb *scb);
@@ -463,25 +189,7 @@ static __inline uint32_t
ahd_get_sense_bufaddr(struct ahd_softc *ahd,
struct scb *scb);
-/*
- * Return pointers to the transfer negotiation information
- * for the specified our_id/remote_id pair.
- */
-static __inline struct ahd_initiator_tinfo *
-ahd_fetch_transinfo(struct ahd_softc *ahd, char channel, u_int our_id,
- u_int remote_id, struct ahd_tmode_tstate **tstate)
-{
- /*
- * Transfer data structures are stored from the perspective
- * of the target role. Since the parameters for a connection
- * in the initiator role to a given target are the same as
- * when the roles are reversed, we pretend we are the target.
- */
- if (channel == 'B')
- our_id += 8;
- *tstate = ahd->enabled_targets[our_id];
- return (&(*tstate)->transinfo[remote_id]);
-}
+#if 0 /* unused */
#define AHD_COPY_COL_IDX(dst, src) \
do { \
@@ -489,304 +197,7 @@ do { \
dst->hscb->lun = src->hscb->lun; \
} while (0)
-static __inline uint16_t
-ahd_inw(struct ahd_softc *ahd, u_int port)
-{
- /*
- * Read high byte first as some registers increment
- * or have other side effects when the low byte is
- * read.
- */
- uint16_t r = ahd_inb(ahd, port+1) << 8;
- return r | ahd_inb(ahd, port);
-}
-
-static __inline void
-ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
-{
- /*
- * Write low byte first to accomodate registers
- * such as PRGMCNT where the order maters.
- */
- ahd_outb(ahd, port, value & 0xFF);
- ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
-}
-
-static __inline uint32_t
-ahd_inl(struct ahd_softc *ahd, u_int port)
-{
- return ((ahd_inb(ahd, port))
- | (ahd_inb(ahd, port+1) << 8)
- | (ahd_inb(ahd, port+2) << 16)
- | (ahd_inb(ahd, port+3) << 24));
-}
-
-static __inline void
-ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value)
-{
- ahd_outb(ahd, port, (value) & 0xFF);
- ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF);
- ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF);
- ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF);
-}
-
-static __inline uint64_t
-ahd_inq(struct ahd_softc *ahd, u_int port)
-{
- return ((ahd_inb(ahd, port))
- | (ahd_inb(ahd, port+1) << 8)
- | (ahd_inb(ahd, port+2) << 16)
- | (ahd_inb(ahd, port+3) << 24)
- | (((uint64_t)ahd_inb(ahd, port+4)) << 32)
- | (((uint64_t)ahd_inb(ahd, port+5)) << 40)
- | (((uint64_t)ahd_inb(ahd, port+6)) << 48)
- | (((uint64_t)ahd_inb(ahd, port+7)) << 56));
-}
-
-static __inline void
-ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value)
-{
- ahd_outb(ahd, port, value & 0xFF);
- ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
- ahd_outb(ahd, port+2, (value >> 16) & 0xFF);
- ahd_outb(ahd, port+3, (value >> 24) & 0xFF);
- ahd_outb(ahd, port+4, (value >> 32) & 0xFF);
- ahd_outb(ahd, port+5, (value >> 40) & 0xFF);
- ahd_outb(ahd, port+6, (value >> 48) & 0xFF);
- ahd_outb(ahd, port+7, (value >> 56) & 0xFF);
-}
-
-static __inline u_int
-ahd_get_scbptr(struct ahd_softc *ahd)
-{
- AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
- ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
- return (ahd_inb(ahd, SCBPTR) | (ahd_inb(ahd, SCBPTR + 1) << 8));
-}
-
-static __inline void
-ahd_set_scbptr(struct ahd_softc *ahd, u_int scbptr)
-{
- AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
- ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
- ahd_outb(ahd, SCBPTR, scbptr & 0xFF);
- ahd_outb(ahd, SCBPTR+1, (scbptr >> 8) & 0xFF);
-}
-
-static __inline u_int
-ahd_get_hnscb_qoff(struct ahd_softc *ahd)
-{
- return (ahd_inw_atomic(ahd, HNSCB_QOFF));
-}
-
-static __inline void
-ahd_set_hnscb_qoff(struct ahd_softc *ahd, u_int value)
-{
- ahd_outw_atomic(ahd, HNSCB_QOFF, value);
-}
-
-static __inline u_int
-ahd_get_hescb_qoff(struct ahd_softc *ahd)
-{
- return (ahd_inb(ahd, HESCB_QOFF));
-}
-
-static __inline void
-ahd_set_hescb_qoff(struct ahd_softc *ahd, u_int value)
-{
- ahd_outb(ahd, HESCB_QOFF, value);
-}
-
-static __inline u_int
-ahd_get_snscb_qoff(struct ahd_softc *ahd)
-{
- u_int oldvalue;
-
- AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
- oldvalue = ahd_inw(ahd, SNSCB_QOFF);
- ahd_outw(ahd, SNSCB_QOFF, oldvalue);
- return (oldvalue);
-}
-
-static __inline void
-ahd_set_snscb_qoff(struct ahd_softc *ahd, u_int value)
-{
- AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
- ahd_outw(ahd, SNSCB_QOFF, value);
-}
-
-static __inline u_int
-ahd_get_sescb_qoff(struct ahd_softc *ahd)
-{
- AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
- return (ahd_inb(ahd, SESCB_QOFF));
-}
-
-static __inline void
-ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value)
-{
- AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
- ahd_outb(ahd, SESCB_QOFF, value);
-}
-
-static __inline u_int
-ahd_get_sdscb_qoff(struct ahd_softc *ahd)
-{
- AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
- return (ahd_inb(ahd, SDSCB_QOFF) | (ahd_inb(ahd, SDSCB_QOFF + 1) << 8));
-}
-
-static __inline void
-ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value)
-{
- AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
- ahd_outb(ahd, SDSCB_QOFF, value & 0xFF);
- ahd_outb(ahd, SDSCB_QOFF+1, (value >> 8) & 0xFF);
-}
-
-static __inline u_int
-ahd_inb_scbram(struct ahd_softc *ahd, u_int offset)
-{
- u_int value;
-
- /*
- * Workaround PCI-X Rev A. hardware bug.
- * After a host read of SCB memory, the chip
- * may become confused into thinking prefetch
- * was required. This starts the discard timer
- * running and can cause an unexpected discard
- * timer interrupt. The work around is to read
- * a normal register prior to the exhaustion of
- * the discard timer. The mode pointer register
- * has no side effects and so serves well for
- * this purpose.
- *
- * Razor #528
- */
- value = ahd_inb(ahd, offset);
- if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0)
- ahd_inb(ahd, MODE_PTR);
- return (value);
-}
-
-static __inline u_int
-ahd_inw_scbram(struct ahd_softc *ahd, u_int offset)
-{
- return (ahd_inb_scbram(ahd, offset)
- | (ahd_inb_scbram(ahd, offset+1) << 8));
-}
-
-static __inline uint32_t
-ahd_inl_scbram(struct ahd_softc *ahd, u_int offset)
-{
- return (ahd_inw_scbram(ahd, offset)
- | (ahd_inw_scbram(ahd, offset+2) << 16));
-}
-
-static __inline uint64_t
-ahd_inq_scbram(struct ahd_softc *ahd, u_int offset)
-{
- return (ahd_inl_scbram(ahd, offset)
- | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32);
-}
-
-static __inline struct scb *
-ahd_lookup_scb(struct ahd_softc *ahd, u_int tag)
-{
- struct scb* scb;
-
- if (tag >= AHD_SCB_MAX)
- return (NULL);
- scb = ahd->scb_data.scbindex[tag];
- if (scb != NULL)
- ahd_sync_scb(ahd, scb,
- BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
- return (scb);
-}
-
-static __inline void
-ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb)
-{
- struct hardware_scb *q_hscb;
- struct map_node *q_hscb_map;
- uint32_t saved_hscb_busaddr;
-
- /*
- * Our queuing method is a bit tricky. The card
- * knows in advance which HSCB (by address) to download,
- * and we can't disappoint it. To achieve this, the next
- * HSCB to download is saved off in ahd->next_queued_hscb.
- * When we are called to queue "an arbitrary scb",
- * we copy the contents of the incoming HSCB to the one
- * the sequencer knows about, swap HSCB pointers and
- * finally assign the SCB to the tag indexed location
- * in the scb_array. This makes sure that we can still
- * locate the correct SCB by SCB_TAG.
- */
- q_hscb = ahd->next_queued_hscb;
- q_hscb_map = ahd->next_queued_hscb_map;
- saved_hscb_busaddr = q_hscb->hscb_busaddr;
- memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
- q_hscb->hscb_busaddr = saved_hscb_busaddr;
- q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
-
- /* Now swap HSCB pointers. */
- ahd->next_queued_hscb = scb->hscb;
- ahd->next_queued_hscb_map = scb->hscb_map;
- scb->hscb = q_hscb;
- scb->hscb_map = q_hscb_map;
-
- /* Now define the mapping from tag to SCB in the scbindex */
- ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
-}
-
-/*
- * Tell the sequencer about a new transaction to execute.
- */
-static __inline void
-ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb)
-{
- ahd_swap_with_next_hscb(ahd, scb);
-
- if (SCBID_IS_NULL(SCB_GET_TAG(scb)))
- panic("Attempt to queue invalid SCB tag %x\n",
- SCB_GET_TAG(scb));
-
- /*
- * Keep a history of SCBs we've downloaded in the qinfifo.
- */
- ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
- ahd->qinfifonext++;
-
- if (scb->sg_count != 0)
- ahd_setup_data_scb(ahd, scb);
- else
- ahd_setup_noxfer_scb(ahd, scb);
- ahd_setup_scb_common(ahd, scb);
-
- /*
- * Make sure our data is consistent from the
- * perspective of the adapter.
- */
- ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
-
-#ifdef AHD_DEBUG
- if ((ahd_debug & AHD_SHOW_QUEUE) != 0) {
- uint64_t host_dataptr;
-
- host_dataptr = ahd_le64toh(scb->hscb->dataptr);
- printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
- ahd_name(ahd),
- SCB_GET_TAG(scb), scb->hscb->scsiid,
- ahd_le32toh(scb->hscb->hscb_busaddr),
- (u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
- (u_int)(host_dataptr & 0xFFFFFFFF),
- ahd_le32toh(scb->hscb->datacnt));
- }
#endif
- /* Tell the adapter about the newly queued SCB */
- ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
-}
static __inline uint8_t *
ahd_get_sense_buf(struct ahd_softc *ahd, struct scb *scb)
@@ -801,151 +212,9 @@ ahd_get_sense_bufaddr(struct ahd_softc *
}
/************************** Interrupt Processing ******************************/
-static __inline void ahd_sync_qoutfifo(struct ahd_softc *ahd, int op);
-static __inline void ahd_sync_tqinfifo(struct ahd_softc *ahd, int op);
-static __inline u_int ahd_check_cmdcmpltqueues(struct ahd_softc *ahd);
-static __inline int ahd_intr(struct ahd_softc *ahd);
-
-static __inline void
-ahd_sync_qoutfifo(struct ahd_softc *ahd, int op)
-{
- ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
- /*offset*/0,
- /*len*/AHD_SCB_MAX * sizeof(struct ahd_completion), op);
-}
-
-static __inline void
-ahd_sync_tqinfifo(struct ahd_softc *ahd, int op)
-{
-#ifdef AHD_TARGET_MODE
- if ((ahd->flags & AHD_TARGETROLE) != 0) {
- ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
- ahd->shared_data_map.dmamap,
- ahd_targetcmd_offset(ahd, 0),
- sizeof(struct target_cmd) * AHD_TMODE_CMDS,
- op);
- }
-#endif
-}
-
-/*
- * See if the firmware has posted any completed commands
- * into our in-core command complete fifos.
- */
-#define AHD_RUN_QOUTFIFO 0x1
-#define AHD_RUN_TQINFIFO 0x2
-static __inline u_int
-ahd_check_cmdcmpltqueues(struct ahd_softc *ahd)
-{
- u_int retval;
-
- retval = 0;
- ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
- /*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo),
- /*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD);
- if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag
- == ahd->qoutfifonext_valid_tag)
- retval |= AHD_RUN_QOUTFIFO;
-#ifdef AHD_TARGET_MODE
- if ((ahd->flags & AHD_TARGETROLE) != 0
- && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) {
- ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
- ahd->shared_data_map.dmamap,
- ahd_targetcmd_offset(ahd, ahd->tqinfifofnext),
- /*len*/sizeof(struct target_cmd),
- BUS_DMASYNC_POSTREAD);
- if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0)
- retval |= AHD_RUN_TQINFIFO;
- }
-#endif
- return (retval);
-}
-
-/*
- * Catch an interrupt from the adapter
- */
-static __inline int
-ahd_intr(struct ahd_softc *ahd)
-{
- u_int intstat;
-
- if ((ahd->pause & INTEN) == 0) {
- /*
- * Our interrupt is not enabled on the chip
- * and may be disabled for re-entrancy reasons,
- * so just return. This is likely just a shared
- * interrupt.
- */
- return (0);
- }
-
- /*
- * Instead of directly reading the interrupt status register,
- * infer the cause of the interrupt by checking our in-core
- * completion queues. This avoids a costly PCI bus read in
- * most cases.
- */
- if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0
- && (ahd_check_cmdcmpltqueues(ahd) != 0))
- intstat = CMDCMPLT;
- else
- intstat = ahd_inb(ahd, INTSTAT);
-
- if ((intstat & INT_PEND) == 0)
- return (0);
-
- if (intstat & CMDCMPLT) {
- ahd_outb(ahd, CLRINT, CLRCMDINT);
-
- /*
- * Ensure that the chip sees that we've cleared
- * this interrupt before we walk the output fifo.
- * Otherwise, we may, due to posted bus writes,
- * clear the interrupt after we finish the scan,
- * and after the sequencer has added new entries
- * and asserted the interrupt again.
- */
- if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
- if (ahd_is_paused(ahd)) {
- /*
- * Potentially lost SEQINT.
- * If SEQINTCODE is non-zero,
- * simulate the SEQINT.
- */
- if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT)
- intstat |= SEQINT;
- }
- } else {
- ahd_flush_device_writes(ahd);
- }
- ahd_run_qoutfifo(ahd);
- ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++;
- ahd->cmdcmplt_total++;
-#ifdef AHD_TARGET_MODE
- if ((ahd->flags & AHD_TARGETROLE) != 0)
- ahd_run_tqinfifo(ahd, /*paused*/FALSE);
-#endif
- }
-
- /*
- * Handle statuses that may invalidate our cached
- * copy of INTSTAT separately.
- */
- if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) {
- /* Hot eject. Do nothing */
- } else if (intstat & HWERRINT) {
- ahd_handle_hwerrint(ahd);
- } else if ((intstat & (PCIINT|SPLTINT)) != 0) {
- ahd->bus_intr(ahd);
- } else {
-
- if ((intstat & SEQINT) != 0)
- ahd_handle_seqint(ahd, intstat);
-
- if ((intstat & SCSIINT) != 0)
- ahd_handle_scsiint(ahd, intstat);
- }
- return (1);
-}
+void ahd_sync_qoutfifo(struct ahd_softc *ahd, int op);
+void ahd_sync_tqinfifo(struct ahd_softc *ahd, int op);
+u_int ahd_check_cmdcmpltqueues(struct ahd_softc *ahd);
+int ahd_intr(struct ahd_softc *ahd);
#endif /* _AIC79XX_INLINE_H_ */
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic79xx_osm.c linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic79xx_osm.c
--- linux-2.6.23/drivers/scsi/aic7xxx/aic79xx_osm.c 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic79xx_osm.c 2007-10-14 15:02:44.000000000 +0100
@@ -369,10 +369,166 @@ static void ahd_release_simq(struct ahd_
static int ahd_linux_unit;
+/************************** OS Utility Wrappers *******************************/
+void ahd_delay(long);
+void
+ahd_delay(long usec)
+{
+ /*
+ * udelay on Linux can have problems for
+ * multi-millisecond waits. Wait at most
+ * 1024us per call.
+ */
+ while (usec > 0) {
+ udelay(usec % 1024);
+ usec -= 1024;
+ }
+}
+
+
+/***************************** Low Level I/O **********************************/
+uint8_t ahd_inb(struct ahd_softc * ahd, long port);
+uint16_t ahd_inw_atomic(struct ahd_softc * ahd, long port);
+void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
+void ahd_outw_atomic(struct ahd_softc * ahd,
+ long port, uint16_t val);
+void ahd_outsb(struct ahd_softc * ahd, long port,
+ uint8_t *, int count);
+void ahd_insb(struct ahd_softc * ahd, long port,
+ uint8_t *, int count);
+
+uint8_t
+ahd_inb(struct ahd_softc * ahd, long port)
+{
+ uint8_t x;
+
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ x = readb(ahd->bshs[0].maddr + port);
+ } else {
+ x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+ }
+ mb();
+ return (x);
+}
+
+uint16_t
+ahd_inw_atomic(struct ahd_softc * ahd, long port)
+{
+ uint8_t x;
+
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ x = readw(ahd->bshs[0].maddr + port);
+ } else {
+ x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+ }
+ mb();
+ return (x);
+}
+
+void
+ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
+{
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ writeb(val, ahd->bshs[0].maddr + port);
+ } else {
+ outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+ }
+ mb();
+}
+
+void
+ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
+{
+ if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+ writew(val, ahd->bshs[0].maddr + port);
+ } else {
+ outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+ }
+ mb();
+}
+
+void
+ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ ahd_outb(ahd, port, *array++);
+}
+
+void
+ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ *array++ = ahd_inb(ahd, port);
+}
+
+/******************************* PCI Routines *********************************/
+uint32_t
+ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
+{
+ switch (width) {
+ case 1:
+ {
+ uint8_t retval;
+
+ pci_read_config_byte(pci, reg, &retval);
+ return (retval);
+ }
+ case 2:
+ {
+ uint16_t retval;
+ pci_read_config_word(pci, reg, &retval);
+ return (retval);
+ }
+ case 4:
+ {
+ uint32_t retval;
+ pci_read_config_dword(pci, reg, &retval);
+ return (retval);
+ }
+ default:
+ panic("ahd_pci_read_config: Read size too big");
+ /* NOTREACHED */
+ return (0);
+ }
+}
+
+void
+ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
+{
+ switch (width) {
+ case 1:
+ pci_write_config_byte(pci, reg, value);
+ break;
+ case 2:
+ pci_write_config_word(pci, reg, value);
+ break;
+ case 4:
+ pci_write_config_dword(pci, reg, value);
+ break;
+ default:
+ panic("ahd_pci_write_config: Write size too big");
+ /* NOTREACHED */
+ }
+}
+
/****************************** Inlines ***************************************/
-static __inline void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
+static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
-static __inline void
+static void
ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
{
struct scsi_cmnd *cmd;
@@ -432,7 +588,7 @@ ahd_linux_queue(struct scsi_cmnd * cmd,
return rtn;
}
-static inline struct scsi_target **
+static struct scsi_target **
ahd_linux_target_in_softc(struct scsi_target *starget)
{
struct ahd_softc *ahd =
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic79xx_osm.h linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic79xx_osm.h
--- linux-2.6.23/drivers/scsi/aic7xxx/aic79xx_osm.h 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic79xx_osm.h 2007-10-14 15:02:44.000000000 +0100
@@ -222,22 +222,6 @@ typedef struct timer_list ahd_timer_t;
/***************************** Timer Facilities *******************************/
#define ahd_timer_init init_timer
#define ahd_timer_stop del_timer_sync
-typedef void ahd_linux_callback_t (u_long);
-static __inline void ahd_timer_reset(ahd_timer_t *timer, int usec,
- ahd_callback_t *func, void *arg);
-
-static __inline void
-ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
-{
- struct ahd_softc *ahd;
-
- ahd = (struct ahd_softc *)arg;
- del_timer(timer);
- timer->data = (u_long)arg;
- timer->expires = jiffies + (usec * HZ)/1000000;
- timer->function = (ahd_linux_callback_t*)func;
- add_timer(timer);
-}
/***************************** SMP support ************************************/
#include <linux/spinlock.h>
@@ -386,111 +370,19 @@ struct ahd_platform_data {
#define malloc(size, type, flags) kmalloc(size, flags)
#define free(ptr, type) kfree(ptr)
-static __inline void ahd_delay(long);
-static __inline void
-ahd_delay(long usec)
-{
- /*
- * udelay on Linux can have problems for
- * multi-millisecond waits. Wait at most
- * 1024us per call.
- */
- while (usec > 0) {
- udelay(usec % 1024);
- usec -= 1024;
- }
-}
-
+void ahd_delay(long);
/***************************** Low Level I/O **********************************/
-static __inline uint8_t ahd_inb(struct ahd_softc * ahd, long port);
-static __inline uint16_t ahd_inw_atomic(struct ahd_softc * ahd, long port);
-static __inline void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
-static __inline void ahd_outw_atomic(struct ahd_softc * ahd,
+uint8_t ahd_inb(struct ahd_softc * ahd, long port);
+uint16_t ahd_inw_atomic(struct ahd_softc * ahd, long port);
+void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
+void ahd_outw_atomic(struct ahd_softc * ahd,
long port, uint16_t val);
-static __inline void ahd_outsb(struct ahd_softc * ahd, long port,
+void ahd_outsb(struct ahd_softc * ahd, long port,
uint8_t *, int count);
-static __inline void ahd_insb(struct ahd_softc * ahd, long port,
+void ahd_insb(struct ahd_softc * ahd, long port,
uint8_t *, int count);
-static __inline uint8_t
-ahd_inb(struct ahd_softc * ahd, long port)
-{
- uint8_t x;
-
- if (ahd->tags[0] == BUS_SPACE_MEMIO) {
- x = readb(ahd->bshs[0].maddr + port);
- } else {
- x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
- }
- mb();
- return (x);
-}
-
-static __inline uint16_t
-ahd_inw_atomic(struct ahd_softc * ahd, long port)
-{
- uint8_t x;
-
- if (ahd->tags[0] == BUS_SPACE_MEMIO) {
- x = readw(ahd->bshs[0].maddr + port);
- } else {
- x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
- }
- mb();
- return (x);
-}
-
-static __inline void
-ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
-{
- if (ahd->tags[0] == BUS_SPACE_MEMIO) {
- writeb(val, ahd->bshs[0].maddr + port);
- } else {
- outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
- }
- mb();
-}
-
-static __inline void
-ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
-{
- if (ahd->tags[0] == BUS_SPACE_MEMIO) {
- writew(val, ahd->bshs[0].maddr + port);
- } else {
- outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
- }
- mb();
-}
-
-static __inline void
-ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
-{
- int i;
-
- /*
- * There is probably a more efficient way to do this on Linux
- * but we don't use this for anything speed critical and this
- * should work.
- */
- for (i = 0; i < count; i++)
- ahd_outb(ahd, port, *array++);
-}
-
-static __inline void
-ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
-{
- int i;
-
- /*
- * There is probably a more efficient way to do this on Linux
- * but we don't use this for anything speed critical and this
- * should work.
- */
- for (i = 0; i < count; i++)
- *array++ = ahd_inb(ahd, port);
-}
-
/**************************** Initialization **********************************/
int ahd_linux_register_host(struct ahd_softc *,
struct scsi_host_template *);
@@ -593,62 +485,12 @@ void ahd_linux_pci_exit(void);
int ahd_pci_map_registers(struct ahd_softc *ahd);
int ahd_pci_map_int(struct ahd_softc *ahd);
-static __inline uint32_t ahd_pci_read_config(ahd_dev_softc_t pci,
+uint32_t ahd_pci_read_config(ahd_dev_softc_t pci,
int reg, int width);
-
-static __inline uint32_t
-ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
-{
- switch (width) {
- case 1:
- {
- uint8_t retval;
-
- pci_read_config_byte(pci, reg, &retval);
- return (retval);
- }
- case 2:
- {
- uint16_t retval;
- pci_read_config_word(pci, reg, &retval);
- return (retval);
- }
- case 4:
- {
- uint32_t retval;
- pci_read_config_dword(pci, reg, &retval);
- return (retval);
- }
- default:
- panic("ahd_pci_read_config: Read size too big");
- /* NOTREACHED */
- return (0);
- }
-}
-
-static __inline void ahd_pci_write_config(ahd_dev_softc_t pci,
+void ahd_pci_write_config(ahd_dev_softc_t pci,
int reg, uint32_t value,
int width);
-static __inline void
-ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
-{
- switch (width) {
- case 1:
- pci_write_config_byte(pci, reg, value);
- break;
- case 2:
- pci_write_config_word(pci, reg, value);
- break;
- case 4:
- pci_write_config_dword(pci, reg, value);
- break;
- default:
- panic("ahd_pci_write_config: Write size too big");
- /* NOTREACHED */
- }
-}
-
static __inline int ahd_get_pci_function(ahd_dev_softc_t);
static __inline int
ahd_get_pci_function(ahd_dev_softc_t pci)
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_core.c linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_core.c
--- linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_core.c 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_core.c 2007-10-14 15:02:44.000000000 +0100
@@ -237,6 +237,510 @@ static void ahc_update_scsiid(struct ah
static int ahc_handle_target_cmd(struct ahc_softc *ahc,
struct target_cmd *cmd);
#endif
+
+/************************* Sequencer Execution Control ************************/
+/*
+ * Work around any chip bugs related to halting sequencer execution.
+ * On Ultra2 controllers, we must clear the CIOBUS stretch signal by
+ * reading a register that will set this signal and deassert it.
+ * Without this workaround, if the chip is paused, by an interrupt or
+ * manual pause while accessing scb ram, accesses to certain registers
+ * will hang the system (infinite pci retries).
+ */
+void
+ahc_pause_bug_fix(struct ahc_softc *ahc)
+{
+ if ((ahc->features & AHC_ULTRA2) != 0)
+ (void)ahc_inb(ahc, CCSCBCTL);
+}
+
+/*
+ * Determine whether the sequencer has halted code execution.
+ * Returns non-zero status if the sequencer is stopped.
+ */
+int
+ahc_is_paused(struct ahc_softc *ahc)
+{
+ return ((ahc_inb(ahc, HCNTRL) & PAUSE) != 0);
+}
+
+/*
+ * Request that the sequencer stop and wait, indefinitely, for it
+ * to stop. The sequencer will only acknowledge that it is paused
+ * once it has reached an instruction boundary and PAUSEDIS is
+ * cleared in the SEQCTL register. The sequencer may use PAUSEDIS
+ * for critical sections.
+ */
+void
+ahc_pause(struct ahc_softc *ahc)
+{
+ ahc_outb(ahc, HCNTRL, ahc->pause);
+
+ /*
+ * Since the sequencer can disable pausing in a critical section, we
+ * must loop until it actually stops.
+ */
+ while (ahc_is_paused(ahc) == 0)
+ ;
+
+ ahc_pause_bug_fix(ahc);
+}
+
+/*
+ * Allow the sequencer to continue program execution.
+ * We check here to ensure that no additional interrupt
+ * sources that would cause the sequencer to halt have been
+ * asserted. If, for example, a SCSI bus reset is detected
+ * while we are fielding a different, pausing, interrupt type,
+ * we don't want to release the sequencer before going back
+ * into our interrupt handler and dealing with this new
+ * condition.
+ */
+void
+ahc_unpause(struct ahc_softc *ahc)
+{
+ if ((ahc_inb(ahc, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) == 0)
+ ahc_outb(ahc, HCNTRL, ahc->unpause);
+}
+
+/************************** Memory mapping routines ***************************/
+struct ahc_dma_seg *
+ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr)
+{
+ int sg_index;
+
+ sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg);
+ /* sg_list_phys points to entry 1, not 0 */
+ sg_index++;
+
+ return (&scb->sg_list[sg_index]);
+}
+
+uint32_t
+ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg)
+{
+ int sg_index;
+
+ /* sg_list_phys points to entry 1, not 0 */
+ sg_index = sg - &scb->sg_list[1];
+
+ return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list)));
+}
+
+uint32_t
+ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index)
+{
+ return (ahc->scb_data->hscb_busaddr
+ + (sizeof(struct hardware_scb) * index));
+}
+
+void
+ahc_sync_scb(struct ahc_softc *ahc, struct scb *scb, int op)
+{
+ ahc_dmamap_sync(ahc, ahc->scb_data->hscb_dmat,
+ ahc->scb_data->hscb_dmamap,
+ /*offset*/(scb->hscb - ahc->hscbs) * sizeof(*scb->hscb),
+ /*len*/sizeof(*scb->hscb), op);
+}
+
+void
+ahc_sync_sglist(struct ahc_softc *ahc, struct scb *scb, int op)
+{
+ if (scb->sg_count == 0)
+ return;
+
+ ahc_dmamap_sync(ahc, ahc->scb_data->sg_dmat, scb->sg_map->sg_dmamap,
+ /*offset*/(scb->sg_list - scb->sg_map->sg_vaddr)
+ * sizeof(struct ahc_dma_seg),
+ /*len*/sizeof(struct ahc_dma_seg) * scb->sg_count, op);
+}
+
+uint32_t
+ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index)
+{
+ return (((uint8_t *)&ahc->targetcmds[index]) - ahc->qoutfifo);
+}
+
+/*********************** Miscelaneous Support Functions ***********************/
+/*
+ * Determine whether the sequencer reported a residual
+ * for this SCB/transaction.
+ */
+void
+ahc_update_residual(struct ahc_softc *ahc, struct scb *scb)
+{
+ uint32_t sgptr;
+
+ sgptr = ahc_le32toh(scb->hscb->sgptr);
+ if ((sgptr & SG_RESID_VALID) != 0)
+ ahc_calc_residual(ahc, scb);
+}
+
+/*
+ * Return pointers to the transfer negotiation information
+ * for the specified our_id/remote_id pair.
+ */
+struct ahc_initiator_tinfo *
+ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id,
+ u_int remote_id, struct ahc_tmode_tstate **tstate)
+{
+ /*
+ * Transfer data structures are stored from the perspective
+ * of the target role. Since the parameters for a connection
+ * in the initiator role to a given target are the same as
+ * when the roles are reversed, we pretend we are the target.
+ */
+ if (channel == 'B')
+ our_id += 8;
+ *tstate = ahc->enabled_targets[our_id];
+ return (&(*tstate)->transinfo[remote_id]);
+}
+
+uint16_t
+ahc_inw(struct ahc_softc *ahc, u_int port)
+{
+ uint16_t r = ahc_inb(ahc, port+1) << 8;
+ return r | ahc_inb(ahc, port);
+}
+
+void
+ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
+{
+ ahc_outb(ahc, port, value & 0xFF);
+ ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
+}
+
+uint32_t
+ahc_inl(struct ahc_softc *ahc, u_int port)
+{
+ return ((ahc_inb(ahc, port))
+ | (ahc_inb(ahc, port+1) << 8)
+ | (ahc_inb(ahc, port+2) << 16)
+ | (ahc_inb(ahc, port+3) << 24));
+}
+
+void
+ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
+{
+ ahc_outb(ahc, port, (value) & 0xFF);
+ ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
+ ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
+ ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
+}
+
+uint64_t
+ahc_inq(struct ahc_softc *ahc, u_int port)
+{
+ return ((ahc_inb(ahc, port))
+ | (ahc_inb(ahc, port+1) << 8)
+ | (ahc_inb(ahc, port+2) << 16)
+ | (ahc_inb(ahc, port+3) << 24)
+ | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
+ | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
+ | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
+ | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
+}
+
+void
+ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
+{
+ ahc_outb(ahc, port, value & 0xFF);
+ ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
+ ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
+ ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
+ ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
+ ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
+ ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
+ ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
+}
+
+/*
+ * Get a free scb. If there are none, see if we can allocate a new SCB.
+ */
+struct scb *
+ahc_get_scb(struct ahc_softc *ahc)
+{
+ struct scb *scb;
+
+ if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
+ ahc_alloc_scbs(ahc);
+ scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
+ if (scb == NULL)
+ return (NULL);
+ }
+ SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
+ return (scb);
+}
+
+/*
+ * Return an SCB resource to the free list.
+ */
+void
+ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
+{
+ struct hardware_scb *hscb;
+
+ hscb = scb->hscb;
+ /* Clean up for the next user */
+ ahc->scb_data->scbindex[hscb->tag] = NULL;
+ scb->flags = SCB_FREE;
+ hscb->control = 0;
+
+ SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
+
+ /* Notify the OSM that a resource is now available. */
+ ahc_platform_scb_free(ahc, scb);
+}
+
+struct scb *
+ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
+{
+ struct scb* scb;
+
+ scb = ahc->scb_data->scbindex[tag];
+ if (scb != NULL)
+ ahc_sync_scb(ahc, scb,
+ BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
+ return (scb);
+}
+
+void
+ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
+{
+ struct hardware_scb *q_hscb;
+ u_int saved_tag;
+
+ /*
+ * Our queuing method is a bit tricky. The card
+ * knows in advance which HSCB to download, and we
+ * can't disappoint it. To achieve this, the next
+ * SCB to download is saved off in ahc->next_queued_scb.
+ * When we are called to queue "an arbitrary scb",
+ * we copy the contents of the incoming HSCB to the one
+ * the sequencer knows about, swap HSCB pointers and
+ * finally assign the SCB to the tag indexed location
+ * in the scb_array. This makes sure that we can still
+ * locate the correct SCB by SCB_TAG.
+ */
+ q_hscb = ahc->next_queued_scb->hscb;
+ saved_tag = q_hscb->tag;
+ memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
+ if ((scb->flags & SCB_CDB32_PTR) != 0) {
+ q_hscb->shared_data.cdb_ptr =
+ ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
+ + offsetof(struct hardware_scb, cdb32));
+ }
+ q_hscb->tag = saved_tag;
+ q_hscb->next = scb->hscb->tag;
+
+ /* Now swap HSCB pointers. */
+ ahc->next_queued_scb->hscb = scb->hscb;
+ scb->hscb = q_hscb;
+
+ /* Now define the mapping from tag to SCB in the scbindex */
+ ahc->scb_data->scbindex[scb->hscb->tag] = scb;
+}
+
+/*
+ * Tell the sequencer about a new transaction to execute.
+ */
+void
+ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
+{
+ ahc_swap_with_next_hscb(ahc, scb);
+
+ if (scb->hscb->tag == SCB_LIST_NULL
+ || scb->hscb->next == SCB_LIST_NULL)
+ panic("Attempt to queue invalid SCB tag %x:%x\n",
+ scb->hscb->tag, scb->hscb->next);
+
+ /*
+ * Setup data "oddness".
+ */
+ scb->hscb->lun &= LID;
+ if (ahc_get_transfer_length(scb) & 0x1)
+ scb->hscb->lun |= SCB_XFERLEN_ODD;
+
+ /*
+ * Keep a history of SCBs we've downloaded in the qinfifo.
+ */
+ ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
+
+ /*
+ * Make sure our data is consistent from the
+ * perspective of the adapter.
+ */
+ ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+
+ /* Tell the adapter about the newly queued SCB */
+ if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+ ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
+ } else {
+ if ((ahc->features & AHC_AUTOPAUSE) == 0)
+ ahc_pause(ahc);
+ ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
+ if ((ahc->features & AHC_AUTOPAUSE) == 0)
+ ahc_unpause(ahc);
+ }
+}
+
+struct scsi_sense_data *
+ahc_get_sense_buf(struct ahc_softc *ahc, struct scb *scb)
+{
+ int offset;
+
+ offset = scb - ahc->scb_data->scbarray;
+ return (&ahc->scb_data->sense[offset]);
+}
+
+uint32_t
+ahc_get_sense_bufaddr(struct ahc_softc *ahc, struct scb *scb)
+{
+ int offset;
+
+ offset = scb - ahc->scb_data->scbarray;
+ return (ahc->scb_data->sense_busaddr
+ + (offset * sizeof(struct scsi_sense_data)));
+}
+
+/************************** Interrupt Processing ******************************/
+void
+ahc_sync_qoutfifo(struct ahc_softc *ahc, int op)
+{
+ ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
+ /*offset*/0, /*len*/256, op);
+}
+
+void
+ahc_sync_tqinfifo(struct ahc_softc *ahc, int op)
+{
+#ifdef AHC_TARGET_MODE
+ if ((ahc->flags & AHC_TARGETROLE) != 0) {
+ ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
+ ahc->shared_data_dmamap,
+ ahc_targetcmd_offset(ahc, 0),
+ sizeof(struct target_cmd) * AHC_TMODE_CMDS,
+ op);
+ }
+#endif
+}
+
+/*
+ * See if the firmware has posted any completed commands
+ * into our in-core command complete fifos.
+ */
+#define AHC_RUN_QOUTFIFO 0x1
+#define AHC_RUN_TQINFIFO 0x2
+u_int
+ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
+{
+ u_int retval;
+
+ retval = 0;
+ ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
+ /*offset*/ahc->qoutfifonext, /*len*/1,
+ BUS_DMASYNC_POSTREAD);
+ if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
+ retval |= AHC_RUN_QOUTFIFO;
+#ifdef AHC_TARGET_MODE
+ if ((ahc->flags & AHC_TARGETROLE) != 0
+ && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
+ ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
+ ahc->shared_data_dmamap,
+ ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
+ /*len*/sizeof(struct target_cmd),
+ BUS_DMASYNC_POSTREAD);
+ if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
+ retval |= AHC_RUN_TQINFIFO;
+ }
+#endif
+ return (retval);
+}
+
+/*
+ * Catch an interrupt from the adapter
+ */
+int
+ahc_intr(struct ahc_softc *ahc)
+{
+ u_int intstat;
+
+ if ((ahc->pause & INTEN) == 0) {
+ /*
+ * Our interrupt is not enabled on the chip
+ * and may be disabled for re-entrancy reasons,
+ * so just return. This is likely just a shared
+ * interrupt.
+ */
+ return (0);
+ }
+ /*
+ * Instead of directly reading the interrupt status register,
+ * infer the cause of the interrupt by checking our in-core
+ * completion queues. This avoids a costly PCI bus read in
+ * most cases.
+ */
+ if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
+ && (ahc_check_cmdcmpltqueues(ahc) != 0))
+ intstat = CMDCMPLT;
+ else {
+ intstat = ahc_inb(ahc, INTSTAT);
+ }
+
+ if ((intstat & INT_PEND) == 0) {
+#if AHC_PCI_CONFIG > 0
+ if (ahc->unsolicited_ints > 500) {
+ ahc->unsolicited_ints = 0;
+ if ((ahc->chip & AHC_PCI) != 0
+ && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
+ ahc->bus_intr(ahc);
+ }
+#endif
+ ahc->unsolicited_ints++;
+ return (0);
+ }
+ ahc->unsolicited_ints = 0;
+
+ if (intstat & CMDCMPLT) {
+ ahc_outb(ahc, CLRINT, CLRCMDINT);
+
+ /*
+ * Ensure that the chip sees that we've cleared
+ * this interrupt before we walk the output fifo.
+ * Otherwise, we may, due to posted bus writes,
+ * clear the interrupt after we finish the scan,
+ * and after the sequencer has added new entries
+ * and asserted the interrupt again.
+ */
+ ahc_flush_device_writes(ahc);
+ ahc_run_qoutfifo(ahc);
+#ifdef AHC_TARGET_MODE
+ if ((ahc->flags & AHC_TARGETROLE) != 0)
+ ahc_run_tqinfifo(ahc, /*paused*/FALSE);
+#endif
+ }
+
+ /*
+ * Handle statuses that may invalidate our cached
+ * copy of INTSTAT separately.
+ */
+ if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
+ /* Hot eject. Do nothing */
+ } else if (intstat & BRKADRINT) {
+ ahc_handle_brkadrint(ahc);
+ } else if ((intstat & (SEQINT|SCSIINT)) != 0) {
+
+ ahc_pause_bug_fix(ahc);
+
+ if ((intstat & SEQINT) != 0)
+ ahc_handle_seqint(ahc, intstat);
+
+ if ((intstat & SCSIINT) != 0)
+ ahc_handle_scsiint(ahc, intstat);
+ }
+ return (1);
+}
+
/************************* Sequencer Execution Control ************************/
/*
* Restart the sequencer program from address zero
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_inline.h linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_inline.h
--- linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_inline.h 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_inline.h 2007-10-14 15:02:44.000000000 +0100
@@ -46,74 +46,10 @@
#define _AIC7XXX_INLINE_H_
/************************* Sequencer Execution Control ************************/
-static __inline void ahc_pause_bug_fix(struct ahc_softc *ahc);
-static __inline int ahc_is_paused(struct ahc_softc *ahc);
-static __inline void ahc_pause(struct ahc_softc *ahc);
-static __inline void ahc_unpause(struct ahc_softc *ahc);
-
-/*
- * Work around any chip bugs related to halting sequencer execution.
- * On Ultra2 controllers, we must clear the CIOBUS stretch signal by
- * reading a register that will set this signal and deassert it.
- * Without this workaround, if the chip is paused, by an interrupt or
- * manual pause while accessing scb ram, accesses to certain registers
- * will hang the system (infinite pci retries).
- */
-static __inline void
-ahc_pause_bug_fix(struct ahc_softc *ahc)
-{
- if ((ahc->features & AHC_ULTRA2) != 0)
- (void)ahc_inb(ahc, CCSCBCTL);
-}
-
-/*
- * Determine whether the sequencer has halted code execution.
- * Returns non-zero status if the sequencer is stopped.
- */
-static __inline int
-ahc_is_paused(struct ahc_softc *ahc)
-{
- return ((ahc_inb(ahc, HCNTRL) & PAUSE) != 0);
-}
-
-/*
- * Request that the sequencer stop and wait, indefinitely, for it
- * to stop. The sequencer will only acknowledge that it is paused
- * once it has reached an instruction boundary and PAUSEDIS is
- * cleared in the SEQCTL register. The sequencer may use PAUSEDIS
- * for critical sections.
- */
-static __inline void
-ahc_pause(struct ahc_softc *ahc)
-{
- ahc_outb(ahc, HCNTRL, ahc->pause);
-
- /*
- * Since the sequencer can disable pausing in a critical section, we
- * must loop until it actually stops.
- */
- while (ahc_is_paused(ahc) == 0)
- ;
-
- ahc_pause_bug_fix(ahc);
-}
-
-/*
- * Allow the sequencer to continue program execution.
- * We check here to ensure that no additional interrupt
- * sources that would cause the sequencer to halt have been
- * asserted. If, for example, a SCSI bus reset is detected
- * while we are fielding a different, pausing, interrupt type,
- * we don't want to release the sequencer before going back
- * into our interrupt handler and dealing with this new
- * condition.
- */
-static __inline void
-ahc_unpause(struct ahc_softc *ahc)
-{
- if ((ahc_inb(ahc, INTSTAT) & (SCSIINT | SEQINT | BRKADRINT)) == 0)
- ahc_outb(ahc, HCNTRL, ahc->unpause);
-}
+void ahc_pause_bug_fix(struct ahc_softc *ahc);
+int ahc_is_paused(struct ahc_softc *ahc);
+void ahc_pause(struct ahc_softc *ahc);
+void ahc_unpause(struct ahc_softc *ahc);
/*********************** Untagged Transaction Routines ************************/
static __inline void ahc_freeze_untagged_queues(struct ahc_softc *ahc);
@@ -147,78 +83,21 @@ ahc_release_untagged_queues(struct ahc_s
}
/************************** Memory mapping routines ***************************/
-static __inline struct ahc_dma_seg *
- ahc_sg_bus_to_virt(struct scb *scb,
- uint32_t sg_busaddr);
-static __inline uint32_t
- ahc_sg_virt_to_bus(struct scb *scb,
- struct ahc_dma_seg *sg);
-static __inline uint32_t
- ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index);
-static __inline void ahc_sync_scb(struct ahc_softc *ahc,
- struct scb *scb, int op);
-static __inline void ahc_sync_sglist(struct ahc_softc *ahc,
- struct scb *scb, int op);
-static __inline uint32_t
- ahc_targetcmd_offset(struct ahc_softc *ahc,
- u_int index);
-
-static __inline struct ahc_dma_seg *
-ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr)
-{
- int sg_index;
-
- sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg);
- /* sg_list_phys points to entry 1, not 0 */
- sg_index++;
-
- return (&scb->sg_list[sg_index]);
-}
-
-static __inline uint32_t
-ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg)
-{
- int sg_index;
-
- /* sg_list_phys points to entry 1, not 0 */
- sg_index = sg - &scb->sg_list[1];
-
- return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list)));
-}
-
-static __inline uint32_t
-ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index)
-{
- return (ahc->scb_data->hscb_busaddr
- + (sizeof(struct hardware_scb) * index));
-}
-
-static __inline void
-ahc_sync_scb(struct ahc_softc *ahc, struct scb *scb, int op)
-{
- ahc_dmamap_sync(ahc, ahc->scb_data->hscb_dmat,
- ahc->scb_data->hscb_dmamap,
- /*offset*/(scb->hscb - ahc->hscbs) * sizeof(*scb->hscb),
- /*len*/sizeof(*scb->hscb), op);
-}
-
-static __inline void
-ahc_sync_sglist(struct ahc_softc *ahc, struct scb *scb, int op)
-{
- if (scb->sg_count == 0)
- return;
-
- ahc_dmamap_sync(ahc, ahc->scb_data->sg_dmat, scb->sg_map->sg_dmamap,
- /*offset*/(scb->sg_list - scb->sg_map->sg_vaddr)
- * sizeof(struct ahc_dma_seg),
- /*len*/sizeof(struct ahc_dma_seg) * scb->sg_count, op);
-}
-
-static __inline uint32_t
-ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index)
-{
- return (((uint8_t *)&ahc->targetcmds[index]) - ahc->qoutfifo);
-}
+struct ahc_dma_seg *
+ ahc_sg_bus_to_virt(struct scb *scb,
+ uint32_t sg_busaddr);
+uint32_t
+ ahc_sg_virt_to_bus(struct scb *scb,
+ struct ahc_dma_seg *sg);
+uint32_t
+ ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index);
+void ahc_sync_scb(struct ahc_softc *ahc,
+ struct scb *scb, int op);
+void ahc_sync_sglist(struct ahc_softc *ahc,
+ struct scb *scb, int op);
+uint32_t
+ ahc_targetcmd_offset(struct ahc_softc *ahc,
+ u_int index);
/******************************** Debugging ***********************************/
static __inline char *ahc_name(struct ahc_softc *ahc);
@@ -230,421 +109,44 @@ ahc_name(struct ahc_softc *ahc)
}
/*********************** Miscelaneous Support Functions ***********************/
-
-static __inline void ahc_update_residual(struct ahc_softc *ahc,
- struct scb *scb);
-static __inline struct ahc_initiator_tinfo *
- ahc_fetch_transinfo(struct ahc_softc *ahc,
- char channel, u_int our_id,
- u_int remote_id,
- struct ahc_tmode_tstate **tstate);
-static __inline uint16_t
- ahc_inw(struct ahc_softc *ahc, u_int port);
-static __inline void ahc_outw(struct ahc_softc *ahc, u_int port,
- u_int value);
-static __inline uint32_t
- ahc_inl(struct ahc_softc *ahc, u_int port);
-static __inline void ahc_outl(struct ahc_softc *ahc, u_int port,
- uint32_t value);
-static __inline uint64_t
- ahc_inq(struct ahc_softc *ahc, u_int port);
-static __inline void ahc_outq(struct ahc_softc *ahc, u_int port,
- uint64_t value);
-static __inline struct scb*
- ahc_get_scb(struct ahc_softc *ahc);
-static __inline void ahc_free_scb(struct ahc_softc *ahc, struct scb *scb);
-static __inline void ahc_swap_with_next_hscb(struct ahc_softc *ahc,
- struct scb *scb);
-static __inline void ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb);
-static __inline struct scsi_sense_data *
- ahc_get_sense_buf(struct ahc_softc *ahc,
- struct scb *scb);
-static __inline uint32_t
- ahc_get_sense_bufaddr(struct ahc_softc *ahc,
- struct scb *scb);
-
-/*
- * Determine whether the sequencer reported a residual
- * for this SCB/transaction.
- */
-static __inline void
-ahc_update_residual(struct ahc_softc *ahc, struct scb *scb)
-{
- uint32_t sgptr;
-
- sgptr = ahc_le32toh(scb->hscb->sgptr);
- if ((sgptr & SG_RESID_VALID) != 0)
- ahc_calc_residual(ahc, scb);
-}
-
-/*
- * Return pointers to the transfer negotiation information
- * for the specified our_id/remote_id pair.
- */
-static __inline struct ahc_initiator_tinfo *
-ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id,
- u_int remote_id, struct ahc_tmode_tstate **tstate)
-{
- /*
- * Transfer data structures are stored from the perspective
- * of the target role. Since the parameters for a connection
- * in the initiator role to a given target are the same as
- * when the roles are reversed, we pretend we are the target.
- */
- if (channel == 'B')
- our_id += 8;
- *tstate = ahc->enabled_targets[our_id];
- return (&(*tstate)->transinfo[remote_id]);
-}
-
-static __inline uint16_t
-ahc_inw(struct ahc_softc *ahc, u_int port)
-{
- uint16_t r = ahc_inb(ahc, port+1) << 8;
- return r | ahc_inb(ahc, port);
-}
-
-static __inline void
-ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
-{
- ahc_outb(ahc, port, value & 0xFF);
- ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
-}
-
-static __inline uint32_t
-ahc_inl(struct ahc_softc *ahc, u_int port)
-{
- return ((ahc_inb(ahc, port))
- | (ahc_inb(ahc, port+1) << 8)
- | (ahc_inb(ahc, port+2) << 16)
- | (ahc_inb(ahc, port+3) << 24));
-}
-
-static __inline void
-ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
-{
- ahc_outb(ahc, port, (value) & 0xFF);
- ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
- ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
- ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
-}
-
-static __inline uint64_t
-ahc_inq(struct ahc_softc *ahc, u_int port)
-{
- return ((ahc_inb(ahc, port))
- | (ahc_inb(ahc, port+1) << 8)
- | (ahc_inb(ahc, port+2) << 16)
- | (ahc_inb(ahc, port+3) << 24)
- | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
- | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
- | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
- | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
-}
-
-static __inline void
-ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
-{
- ahc_outb(ahc, port, value & 0xFF);
- ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
- ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
- ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
- ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
- ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
- ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
- ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
-}
-
-/*
- * Get a free scb. If there are none, see if we can allocate a new SCB.
- */
-static __inline struct scb *
-ahc_get_scb(struct ahc_softc *ahc)
-{
- struct scb *scb;
-
- if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
- ahc_alloc_scbs(ahc);
- scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
- if (scb == NULL)
- return (NULL);
- }
- SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
- return (scb);
-}
-
-/*
- * Return an SCB resource to the free list.
- */
-static __inline void
-ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
-{
- struct hardware_scb *hscb;
-
- hscb = scb->hscb;
- /* Clean up for the next user */
- ahc->scb_data->scbindex[hscb->tag] = NULL;
- scb->flags = SCB_FREE;
- hscb->control = 0;
-
- SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
-
- /* Notify the OSM that a resource is now available. */
- ahc_platform_scb_free(ahc, scb);
-}
-
-static __inline struct scb *
-ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
-{
- struct scb* scb;
-
- scb = ahc->scb_data->scbindex[tag];
- if (scb != NULL)
- ahc_sync_scb(ahc, scb,
- BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
- return (scb);
-}
-
-static __inline void
-ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
-{
- struct hardware_scb *q_hscb;
- u_int saved_tag;
-
- /*
- * Our queuing method is a bit tricky. The card
- * knows in advance which HSCB to download, and we
- * can't disappoint it. To achieve this, the next
- * SCB to download is saved off in ahc->next_queued_scb.
- * When we are called to queue "an arbitrary scb",
- * we copy the contents of the incoming HSCB to the one
- * the sequencer knows about, swap HSCB pointers and
- * finally assign the SCB to the tag indexed location
- * in the scb_array. This makes sure that we can still
- * locate the correct SCB by SCB_TAG.
- */
- q_hscb = ahc->next_queued_scb->hscb;
- saved_tag = q_hscb->tag;
- memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
- if ((scb->flags & SCB_CDB32_PTR) != 0) {
- q_hscb->shared_data.cdb_ptr =
- ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
- + offsetof(struct hardware_scb, cdb32));
- }
- q_hscb->tag = saved_tag;
- q_hscb->next = scb->hscb->tag;
-
- /* Now swap HSCB pointers. */
- ahc->next_queued_scb->hscb = scb->hscb;
- scb->hscb = q_hscb;
-
- /* Now define the mapping from tag to SCB in the scbindex */
- ahc->scb_data->scbindex[scb->hscb->tag] = scb;
-}
-
-/*
- * Tell the sequencer about a new transaction to execute.
- */
-static __inline void
-ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
-{
- ahc_swap_with_next_hscb(ahc, scb);
-
- if (scb->hscb->tag == SCB_LIST_NULL
- || scb->hscb->next == SCB_LIST_NULL)
- panic("Attempt to queue invalid SCB tag %x:%x\n",
- scb->hscb->tag, scb->hscb->next);
-
- /*
- * Setup data "oddness".
- */
- scb->hscb->lun &= LID;
- if (ahc_get_transfer_length(scb) & 0x1)
- scb->hscb->lun |= SCB_XFERLEN_ODD;
-
- /*
- * Keep a history of SCBs we've downloaded in the qinfifo.
- */
- ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
-
- /*
- * Make sure our data is consistent from the
- * perspective of the adapter.
- */
- ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
-
- /* Tell the adapter about the newly queued SCB */
- if ((ahc->features & AHC_QUEUE_REGS) != 0) {
- ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
- } else {
- if ((ahc->features & AHC_AUTOPAUSE) == 0)
- ahc_pause(ahc);
- ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
- if ((ahc->features & AHC_AUTOPAUSE) == 0)
- ahc_unpause(ahc);
- }
-}
-
-static __inline struct scsi_sense_data *
-ahc_get_sense_buf(struct ahc_softc *ahc, struct scb *scb)
-{
- int offset;
-
- offset = scb - ahc->scb_data->scbarray;
- return (&ahc->scb_data->sense[offset]);
-}
-
-static __inline uint32_t
-ahc_get_sense_bufaddr(struct ahc_softc *ahc, struct scb *scb)
-{
- int offset;
-
- offset = scb - ahc->scb_data->scbarray;
- return (ahc->scb_data->sense_busaddr
- + (offset * sizeof(struct scsi_sense_data)));
-}
+void ahc_update_residual(struct ahc_softc *ahc,
+ struct scb *scb);
+struct ahc_initiator_tinfo *
+ ahc_fetch_transinfo(struct ahc_softc *ahc,
+ char channel, u_int our_id,
+ u_int remote_id,
+ struct ahc_tmode_tstate **tstate);
+uint16_t
+ ahc_inw(struct ahc_softc *ahc, u_int port);
+void ahc_outw(struct ahc_softc *ahc, u_int port,
+ u_int value);
+uint32_t
+ ahc_inl(struct ahc_softc *ahc, u_int port);
+void ahc_outl(struct ahc_softc *ahc, u_int port,
+ uint32_t value);
+uint64_t
+ ahc_inq(struct ahc_softc *ahc, u_int port);
+void ahc_outq(struct ahc_softc *ahc, u_int port,
+ uint64_t value);
+struct scb*
+ ahc_get_scb(struct ahc_softc *ahc);
+void ahc_free_scb(struct ahc_softc *ahc, struct scb *scb);
+struct scb *
+ ahc_lookup_scb(struct ahc_softc *ahc, u_int tag);
+void ahc_swap_with_next_hscb(struct ahc_softc *ahc,
+ struct scb *scb);
+void ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb);
+struct scsi_sense_data *
+ ahc_get_sense_buf(struct ahc_softc *ahc,
+ struct scb *scb);
+uint32_t
+ ahc_get_sense_bufaddr(struct ahc_softc *ahc,
+ struct scb *scb);
/************************** Interrupt Processing ******************************/
-static __inline void ahc_sync_qoutfifo(struct ahc_softc *ahc, int op);
-static __inline void ahc_sync_tqinfifo(struct ahc_softc *ahc, int op);
-static __inline u_int ahc_check_cmdcmpltqueues(struct ahc_softc *ahc);
-static __inline int ahc_intr(struct ahc_softc *ahc);
-
-static __inline void
-ahc_sync_qoutfifo(struct ahc_softc *ahc, int op)
-{
- ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
- /*offset*/0, /*len*/256, op);
-}
-
-static __inline void
-ahc_sync_tqinfifo(struct ahc_softc *ahc, int op)
-{
-#ifdef AHC_TARGET_MODE
- if ((ahc->flags & AHC_TARGETROLE) != 0) {
- ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
- ahc->shared_data_dmamap,
- ahc_targetcmd_offset(ahc, 0),
- sizeof(struct target_cmd) * AHC_TMODE_CMDS,
- op);
- }
-#endif
-}
-
-/*
- * See if the firmware has posted any completed commands
- * into our in-core command complete fifos.
- */
-#define AHC_RUN_QOUTFIFO 0x1
-#define AHC_RUN_TQINFIFO 0x2
-static __inline u_int
-ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
-{
- u_int retval;
-
- retval = 0;
- ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
- /*offset*/ahc->qoutfifonext, /*len*/1,
- BUS_DMASYNC_POSTREAD);
- if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
- retval |= AHC_RUN_QOUTFIFO;
-#ifdef AHC_TARGET_MODE
- if ((ahc->flags & AHC_TARGETROLE) != 0
- && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
- ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
- ahc->shared_data_dmamap,
- ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
- /*len*/sizeof(struct target_cmd),
- BUS_DMASYNC_POSTREAD);
- if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
- retval |= AHC_RUN_TQINFIFO;
- }
-#endif
- return (retval);
-}
-
-/*
- * Catch an interrupt from the adapter
- */
-static __inline int
-ahc_intr(struct ahc_softc *ahc)
-{
- u_int intstat;
-
- if ((ahc->pause & INTEN) == 0) {
- /*
- * Our interrupt is not enabled on the chip
- * and may be disabled for re-entrancy reasons,
- * so just return. This is likely just a shared
- * interrupt.
- */
- return (0);
- }
- /*
- * Instead of directly reading the interrupt status register,
- * infer the cause of the interrupt by checking our in-core
- * completion queues. This avoids a costly PCI bus read in
- * most cases.
- */
- if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
- && (ahc_check_cmdcmpltqueues(ahc) != 0))
- intstat = CMDCMPLT;
- else {
- intstat = ahc_inb(ahc, INTSTAT);
- }
-
- if ((intstat & INT_PEND) == 0) {
-#if AHC_PCI_CONFIG > 0
- if (ahc->unsolicited_ints > 500) {
- ahc->unsolicited_ints = 0;
- if ((ahc->chip & AHC_PCI) != 0
- && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
- ahc->bus_intr(ahc);
- }
-#endif
- ahc->unsolicited_ints++;
- return (0);
- }
- ahc->unsolicited_ints = 0;
-
- if (intstat & CMDCMPLT) {
- ahc_outb(ahc, CLRINT, CLRCMDINT);
-
- /*
- * Ensure that the chip sees that we've cleared
- * this interrupt before we walk the output fifo.
- * Otherwise, we may, due to posted bus writes,
- * clear the interrupt after we finish the scan,
- * and after the sequencer has added new entries
- * and asserted the interrupt again.
- */
- ahc_flush_device_writes(ahc);
- ahc_run_qoutfifo(ahc);
-#ifdef AHC_TARGET_MODE
- if ((ahc->flags & AHC_TARGETROLE) != 0)
- ahc_run_tqinfifo(ahc, /*paused*/FALSE);
-#endif
- }
-
- /*
- * Handle statuses that may invalidate our cached
- * copy of INTSTAT separately.
- */
- if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
- /* Hot eject. Do nothing */
- } else if (intstat & BRKADRINT) {
- ahc_handle_brkadrint(ahc);
- } else if ((intstat & (SEQINT|SCSIINT)) != 0) {
-
- ahc_pause_bug_fix(ahc);
-
- if ((intstat & SEQINT) != 0)
- ahc_handle_seqint(ahc, intstat);
-
- if ((intstat & SCSIINT) != 0)
- ahc_handle_scsiint(ahc, intstat);
- }
- return (1);
-}
+void ahc_sync_qoutfifo(struct ahc_softc *ahc, int op);
+void ahc_sync_tqinfifo(struct ahc_softc *ahc, int op);
+u_int ahc_check_cmdcmpltqueues(struct ahc_softc *ahc);
+int ahc_intr(struct ahc_softc *ahc);
#endif /* _AIC7XXX_INLINE_H_ */
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_osm.c linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_osm.c
--- linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_osm.c 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_osm.c 2007-10-14 15:02:44.000000000 +0100
@@ -388,14 +388,83 @@ static int aic7xxx_setup(char *s);
static int ahc_linux_unit;
+/************************** OS Utility Wrappers *******************************/
+void
+ahc_delay(long usec)
+{
+ /*
+ * udelay on Linux can have problems for
+ * multi-millisecond waits. Wait at most
+ * 1024us per call.
+ */
+ while (usec > 0) {
+ udelay(usec % 1024);
+ usec -= 1024;
+ }
+}
+
+/***************************** Low Level I/O **********************************/
+uint8_t
+ahc_inb(struct ahc_softc * ahc, long port)
+{
+ uint8_t x;
+
+ if (ahc->tag == BUS_SPACE_MEMIO) {
+ x = readb(ahc->bsh.maddr + port);
+ } else {
+ x = inb(ahc->bsh.ioport + port);
+ }
+ mb();
+ return (x);
+}
+
+void
+ahc_outb(struct ahc_softc * ahc, long port, uint8_t val)
+{
+ if (ahc->tag == BUS_SPACE_MEMIO) {
+ writeb(val, ahc->bsh.maddr + port);
+ } else {
+ outb(val, ahc->bsh.ioport + port);
+ }
+ mb();
+}
+
+void
+ahc_outsb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ ahc_outb(ahc, port, *array++);
+}
+
+void
+ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
+{
+ int i;
+
+ /*
+ * There is probably a more efficient way to do this on Linux
+ * but we don't use this for anything speed critical and this
+ * should work.
+ */
+ for (i = 0; i < count; i++)
+ *array++ = ahc_inb(ahc, port);
+}
+
/********************************* Inlines ************************************/
-static __inline void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*);
+static void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*);
-static __inline int ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb,
+static int ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb,
struct ahc_dma_seg *sg,
dma_addr_t addr, bus_size_t len);
-static __inline void
+static void
ahc_linux_unmap_scb(struct ahc_softc *ahc, struct scb *scb)
{
struct scsi_cmnd *cmd;
@@ -406,7 +475,7 @@ ahc_linux_unmap_scb(struct ahc_softc *ah
scsi_dma_unmap(cmd);
}
-static __inline int
+static int
ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb,
struct ahc_dma_seg *sg, dma_addr_t addr, bus_size_t len)
{
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_osm.h linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_osm.h
--- linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_osm.h 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_osm.h 2007-10-14 15:02:44.000000000 +0100
@@ -375,82 +375,16 @@ struct ahc_platform_data {
#define malloc(size, type, flags) kmalloc(size, flags)
#define free(ptr, type) kfree(ptr)
-static __inline void ahc_delay(long);
-static __inline void
-ahc_delay(long usec)
-{
- /*
- * udelay on Linux can have problems for
- * multi-millisecond waits. Wait at most
- * 1024us per call.
- */
- while (usec > 0) {
- udelay(usec % 1024);
- usec -= 1024;
- }
-}
+void ahc_delay(long);
/***************************** Low Level I/O **********************************/
-static __inline uint8_t ahc_inb(struct ahc_softc * ahc, long port);
-static __inline void ahc_outb(struct ahc_softc * ahc, long port, uint8_t val);
-static __inline void ahc_outsb(struct ahc_softc * ahc, long port,
- uint8_t *, int count);
-static __inline void ahc_insb(struct ahc_softc * ahc, long port,
- uint8_t *, int count);
-
-static __inline uint8_t
-ahc_inb(struct ahc_softc * ahc, long port)
-{
- uint8_t x;
-
- if (ahc->tag == BUS_SPACE_MEMIO) {
- x = readb(ahc->bsh.maddr + port);
- } else {
- x = inb(ahc->bsh.ioport + port);
- }
- mb();
- return (x);
-}
-
-static __inline void
-ahc_outb(struct ahc_softc * ahc, long port, uint8_t val)
-{
- if (ahc->tag == BUS_SPACE_MEMIO) {
- writeb(val, ahc->bsh.maddr + port);
- } else {
- outb(val, ahc->bsh.ioport + port);
- }
- mb();
-}
-
-static __inline void
-ahc_outsb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
-{
- int i;
-
- /*
- * There is probably a more efficient way to do this on Linux
- * but we don't use this for anything speed critical and this
- * should work.
- */
- for (i = 0; i < count; i++)
- ahc_outb(ahc, port, *array++);
-}
-
-static __inline void
-ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
-{
- int i;
-
- /*
- * There is probably a more efficient way to do this on Linux
- * but we don't use this for anything speed critical and this
- * should work.
- */
- for (i = 0; i < count; i++)
- *array++ = ahc_inb(ahc, port);
-}
+uint8_t ahc_inb(struct ahc_softc * ahc, long port);
+void ahc_outb(struct ahc_softc * ahc, long port, uint8_t val);
+void ahc_outsb(struct ahc_softc * ahc, long port,
+ uint8_t *, int count);
+void ahc_insb(struct ahc_softc * ahc, long port,
+ uint8_t *, int count);
/**************************** Initialization **********************************/
int ahc_linux_register_host(struct ahc_softc *,
@@ -555,61 +489,12 @@ void ahc_linux_pci_exit(void);
int ahc_pci_map_registers(struct ahc_softc *ahc);
int ahc_pci_map_int(struct ahc_softc *ahc);
-static __inline uint32_t ahc_pci_read_config(ahc_dev_softc_t pci,
+uint32_t ahc_pci_read_config(ahc_dev_softc_t pci,
int reg, int width);
-static __inline uint32_t
-ahc_pci_read_config(ahc_dev_softc_t pci, int reg, int width)
-{
- switch (width) {
- case 1:
- {
- uint8_t retval;
-
- pci_read_config_byte(pci, reg, &retval);
- return (retval);
- }
- case 2:
- {
- uint16_t retval;
- pci_read_config_word(pci, reg, &retval);
- return (retval);
- }
- case 4:
- {
- uint32_t retval;
- pci_read_config_dword(pci, reg, &retval);
- return (retval);
- }
- default:
- panic("ahc_pci_read_config: Read size too big");
- /* NOTREACHED */
- return (0);
- }
-}
-
-static __inline void ahc_pci_write_config(ahc_dev_softc_t pci,
- int reg, uint32_t value,
- int width);
-
-static __inline void
-ahc_pci_write_config(ahc_dev_softc_t pci, int reg, uint32_t value, int width)
-{
- switch (width) {
- case 1:
- pci_write_config_byte(pci, reg, value);
- break;
- case 2:
- pci_write_config_word(pci, reg, value);
- break;
- case 4:
- pci_write_config_dword(pci, reg, value);
- break;
- default:
- panic("ahc_pci_write_config: Write size too big");
- /* NOTREACHED */
- }
-}
+void ahc_pci_write_config(ahc_dev_softc_t pci,
+ int reg, uint32_t value,
+ int width);
static __inline int ahc_get_pci_function(ahc_dev_softc_t);
static __inline int
diff -urpN linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
--- linux-2.6.23/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2007-10-09 21:31:38.000000000 +0100
+++ linux-2.6.23-aic-1-debloat/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c 2007-10-14 15:02:44.000000000 +0100
@@ -130,6 +130,57 @@ static struct pci_device_id ahc_linux_pc
MODULE_DEVICE_TABLE(pci, ahc_linux_pci_id_table);
+/******************************* PCI Routines *********************************/
+uint32_t
+ahc_pci_read_config(ahc_dev_softc_t pci, int reg, int width)
+{
+ switch (width) {
+ case 1:
+ {
+ uint8_t retval;
+
+ pci_read_config_byte(pci, reg, &retval);
+ return (retval);
+ }
+ case 2:
+ {
+ uint16_t retval;
+ pci_read_config_word(pci, reg, &retval);
+ return (retval);
+ }
+ case 4:
+ {
+ uint32_t retval;
+ pci_read_config_dword(pci, reg, &retval);
+ return (retval);
+ }
+ default:
+ panic("ahc_pci_read_config: Read size too big");
+ /* NOTREACHED */
+ return (0);
+ }
+}
+
+void
+ahc_pci_write_config(ahc_dev_softc_t pci, int reg, uint32_t value, int width)
+{
+ switch (width) {
+ case 1:
+ pci_write_config_byte(pci, reg, value);
+ break;
+ case 2:
+ pci_write_config_word(pci, reg, value);
+ break;
+ case 4:
+ pci_write_config_dword(pci, reg, value);
+ break;
+ default:
+ panic("ahc_pci_write_config: Write size too big");
+ /* NOTREACHED */
+ }
+}
+
+
static struct pci_driver aic7xxx_pci_driver = {
.name = "aic7xxx",
.probe = ahc_linux_pci_dev_probe,
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/3] debloat aic7xxx and aic79xx drivers
2007-08-31 15:15 ` [PATCH 1/3] " Denys Vlasenko
@ 2007-09-24 10:16 ` Hannes Reinecke
0 siblings, 0 replies; 13+ messages in thread
From: Hannes Reinecke @ 2007-09-24 10:16 UTC (permalink / raw)
To: Denys Vlasenko
Cc: Jan Engelhardt, Matthew Wilcox, Arjan van de Ven, Adrian Bunk,
Andrew Morton, linux-scsi, linux-kernel
Denys Vlasenko wrote:
> On Friday 31 August 2007 16:13, Denys Vlasenko wrote:
>> Attached are three patches which fix that:
>>
>> text data bss dec hex filename
>> 261433 50018 1172 312623 4c52f linux-2.6.23-rc1.org.t/drivers/scsi/aic7xxx/built-in.o
>> 199654 50018 1172 250844 3d3dc linux-2.6.23-rc1.aic.t/drivers/scsi/aic7xxx/built-in.o
>> 184014 21314 1172 206500 326a4 linux-2.6.23-rc1.aic1.t/drivers/scsi/aic7xxx/built-in.o
>> 202378 2850 1172 206400 32640 linux-2.6.23-rc1.aic2.t/drivers/scsi/aic7xxx/built-in.o
>>
>> 1-debloat.patch deinlines a lot of functions
>> 2-addstatic.patch adds statics, #ifdefs out huge amount of unused code, adds consts
>> 3-addconst.patch adds more consts
> --
> vda
>
>
Signed-off-by: Hannes Reinecke <hare@suse.de>
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 1/3] debloat aic7xxx and aic79xx drivers
2007-08-31 15:13 [PATCH 0/3] " Denys Vlasenko
@ 2007-08-31 15:15 ` Denys Vlasenko
2007-09-24 10:16 ` Hannes Reinecke
0 siblings, 1 reply; 13+ messages in thread
From: Denys Vlasenko @ 2007-08-31 15:15 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Jan Engelhardt, Matthew Wilcox, Arjan van de Ven, Adrian Bunk,
Andrew Morton, linux-scsi, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 730 bytes --]
On Friday 31 August 2007 16:13, Denys Vlasenko wrote:
> Attached are three patches which fix that:
>
> text data bss dec hex filename
> 261433 50018 1172 312623 4c52f linux-2.6.23-rc1.org.t/drivers/scsi/aic7xxx/built-in.o
> 199654 50018 1172 250844 3d3dc linux-2.6.23-rc1.aic.t/drivers/scsi/aic7xxx/built-in.o
> 184014 21314 1172 206500 326a4 linux-2.6.23-rc1.aic1.t/drivers/scsi/aic7xxx/built-in.o
> 202378 2850 1172 206400 32640 linux-2.6.23-rc1.aic2.t/drivers/scsi/aic7xxx/built-in.o
>
> 1-debloat.patch deinlines a lot of functions
> 2-addstatic.patch adds statics, #ifdefs out huge amount of unused code, adds consts
> 3-addconst.patch adds more consts
--
vda
[-- Attachment #2: linux-2.6.23-rc1-aic7xxx-1-debloat.patch.bz2 --]
[-- Type: application/x-bzip2, Size: 14393 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2008-04-07 18:02 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-23 3:40 [PATCH 0/3] debloat aic7xxx and aic79xx drivers Denys Vlasenko
2008-03-23 3:41 ` [PATCH 1/3] " Denys Vlasenko
2008-03-23 3:42 ` [PATCH 2/3] " Denys Vlasenko
2008-03-23 3:42 ` [PATCH 3/3] " Denys Vlasenko
2008-04-07 10:36 ` Hannes Reinecke
2008-04-07 10:34 ` [PATCH 2/3] " Hannes Reinecke
2008-04-07 18:00 ` Denys Vlasenko
2008-04-07 10:31 ` [PATCH 1/3] " Hannes Reinecke
2008-04-07 18:01 ` Denys Vlasenko
-- strict thread matches above, loose matches on Subject: below --
2007-10-14 14:58 [PATCH 0/3] " Denys Vlasenko
2007-10-14 15:00 ` [PATCH 1/3] " Denys Vlasenko
2007-11-01 22:15 ` Matthew Wilcox
2007-08-31 15:13 [PATCH 0/3] " Denys Vlasenko
2007-08-31 15:15 ` [PATCH 1/3] " Denys Vlasenko
2007-09-24 10:16 ` Hannes Reinecke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).