[PATCH v5 0/2] clk: meson-g12a: Add EE clock controller driver

[PATCH v5 0/2] clk: meson-g12a: Add EE clock controller driver

[Jian Hu]

Changes since v4 at[5]
-add bypass clock "g12a_ee_core" from DT
-fix Kconfig description
-change g12a_mpll0_div/g12a_mpll1_div/g12a_mpll2_div/g12a_mpll3_div 
 clock's parent name as fixed_pll_dco
-drop CLK_SET_RATE_PARENT flag for pll clock
-drop CLK_GET_RATE_NOCACHE flag for pll_dco clock
-delete usless note
-enable G12A clock driver

Changes since v3 at[4]
-add fixed clocks clk_regmap definition

Changes since v2 at[2]
-fix fixed clocks's descriptions
-fix alignment
-add enable bit for plls base on [3] patches
-add fixed clock gate bit

Changes since v1 at[1]
-fix typo of 'Everything'.
-change the word 'AmLogic' to 'Amlogic'
-squash patch 1 and 2.
-delete usless message of "Trying obsolete regs".
-delete the empty line in include/dt-bindings/clock/g12a-clkc.h.
-rebase on top of the "next/drivers" branch, and add g12a clock patch.
-add CLK_MUX_ROUND_CLOSEST for g12a_sd_emmc_b_clk0_sel and
 g12a_sd_emmc_c_clk0_sel.

[1]https://lkml.kernel.org/r/1531133549-25806-2-git-send-email-jian.hu@amlogic.com
[2]https://lkml.kernel.org/r/1531728707-192230-2-git-send-email-jian.hu@amlogic.com
[3]https://lkml.kernel.org/r/20180717095617.12240-1-jbrunet@baylibre.com
[4]https://lkml.kernel.org/r/1533890858-113020-1-git-send-email-jian.hu@amlogic.com
[5]https://lkml.kernel.org/r/1541511349-121152-1-git-send-email-jian.hu@amlogic.com

Jian Hu (2):
  dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings
  clk: meson-g12a: Add EE Clock controller driver

 .../bindings/clock/amlogic,gxbb-clkc.txt           |    1 +
 arch/arm64/Kconfig.platforms                       |    1 +
 drivers/clk/meson/Kconfig                          |    8 +
 drivers/clk/meson/Makefile                         |    1 +
 drivers/clk/meson/g12a.c                           | 1185 ++++++++++++++++++++
 drivers/clk/meson/g12a.h                           |  130 +++
 include/dt-bindings/clock/g12a-clkc.h              |   93 ++
 7 files changed, 1419 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

-- 
1.9.1

[PATCH v5 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jian Hu]

Add new clock controller compatible and dt-bingdings headers
for the Everything-Else domain of the g12a SoC

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
 include/dt-bindings/clock/g12a-clkc.h              | 93 ++++++++++++++++++++++
 2 files changed, 94 insertions(+)
 create mode 100644 include/dt-bindings/clock/g12a-clkc.h

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index e950599..0833006 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -9,6 +9,7 @@ Required Properties:
 		"amlogic,gxbb-clkc" for GXBB SoC,
 		"amlogic,gxl-clkc" for GXL and GXM SoC,
 		"amlogic,axg-clkc" for AXG SoC.
+		"amlogic,g12a-clkc" for G12A SoC.
 
 - #clock-cells: should be 1.
 
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
new file mode 100644
index 0000000..b55e6e1
--- /dev/null
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-G12A clock tree IDs
+ *
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __G12A_CLKC_H
+#define __G12A_CLKC_H
+
+#define CLKID_SYS_PLL				0
+#define CLKID_FIXED_PLL				1
+#define CLKID_FCLK_DIV2				2
+#define CLKID_FCLK_DIV3				3
+#define CLKID_FCLK_DIV4				4
+#define CLKID_FCLK_DIV5				5
+#define CLKID_FCLK_DIV7				6
+#define CLKID_GP0_PLL				7
+#define CLKID_CLK81				10
+#define CLKID_MPLL0				11
+#define CLKID_MPLL1				12
+#define CLKID_MPLL2				13
+#define CLKID_MPLL3				14
+#define CLKID_DDR				15
+#define CLKID_DOS				16
+#define CLKID_AUDIO_LOCKER			17
+#define CLKID_MIPI_DSI_HOST			18
+#define CLKID_ETH_PHY				19
+#define CLKID_ISA				20
+#define CLKID_PL301				21
+#define CLKID_PERIPHS				22
+#define CLKID_SPICC0				23
+#define CLKID_I2C				24
+#define CLKID_SANA				25
+#define CLKID_SD				26
+#define CLKID_RNG0				27
+#define CLKID_UART0				28
+#define CLKID_SPICC1				29
+#define CLKID_HIU_IFACE				30
+#define CLKID_MIPI_DSI_PHY			31
+#define CLKID_ASSIST_MISC			32
+#define CLKID_SD_EMMC_A				33
+#define CLKID_SD_EMMC_B				34
+#define CLKID_SD_EMMC_C				35
+#define CLKID_AUDIO_CODEC			36
+#define CLKID_AUDIO				37
+#define CLKID_ETH				38
+#define CLKID_DEMUX				39
+#define CLKID_AUDIO_IFIFO			40
+#define CLKID_ADC				41
+#define CLKID_UART1				42
+#define CLKID_G2D				43
+#define CLKID_RESET				44
+#define CLKID_PCIE_COMB				45
+#define CLKID_PARSER				46
+#define CLKID_USB				47
+#define CLKID_PCIE_PHY				48
+#define CLKID_AHB_ARB0				49
+#define CLKID_AHB_DATA_BUS			50
+#define CLKID_AHB_CTRL_BUS			51
+#define CLKID_HTX_HDCP22			52
+#define CLKID_HTX_PCLK				53
+#define CLKID_BT656				54
+#define CLKID_USB1_DDR_BRIDGE			55
+#define CLKID_MMC_PCLK				56
+#define CLKID_UART2				57
+#define CLKID_VPU_INTR				58
+#define CLKID_GIC				59
+#define CLKID_SD_EMMC_B_CLK0			60
+#define CLKID_SD_EMMC_C_CLK0			61
+#define CLKID_HIFI_PLL				71
+#define CLKID_VCLK2_VENCI0			77
+#define CLKID_VCLK2_VENCI1			78
+#define CLKID_VCLK2_VENCP0			79
+#define CLKID_VCLK2_VENCP1			80
+#define CLKID_VCLK2_VENCT0			81
+#define CLKID_VCLK2_VENCT1			82
+#define CLKID_VCLK2_OTHER			83
+#define CLKID_VCLK2_ENCI			84
+#define CLKID_VCLK2_ENCP			85
+#define CLKID_DAC_CLK				86
+#define CLKID_AOCLK				87
+#define CLKID_IEC958				88
+#define CLKID_ENC480P				89
+#define CLKID_RNG1				90
+#define CLKID_VCLK2_ENCT			91
+#define CLKID_VCLK2_ENCL			92
+#define CLKID_VCLK2_VENCLMMC			93
+#define CLKID_VCLK2_VENCL			94
+#define CLKID_VCLK2_OTHER1			95
+#define CLKID_FCLK_DIV2P5			96
+
+#endif /* __G12A_CLKC_H */
-- 
1.9.1

[PATCH v5 2/2] clk: meson-g12a: Add EE Clock controller driver

[Jian Hu]

Add a Clock driver for the Everything-Else part
of the Amlogic Meson-G12A SoC.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
---
 arch/arm64/Kconfig.platforms |    1 +
 drivers/clk/meson/Kconfig    |    8 +
 drivers/clk/meson/Makefile   |    1 +
 drivers/clk/meson/g12a.c     | 1185 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/g12a.h     |  130 +++++
 5 files changed, 1325 insertions(+)
 create mode 100644 drivers/clk/meson/g12a.c
 create mode 100644 drivers/clk/meson/g12a.h

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 51bc479..95d824c 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -116,6 +116,7 @@ config ARCH_MESON
 	select COMMON_CLK_GXBB
 	select COMMON_CLK_AXG
 	select MESON_IRQ_GPIO
+	select COMMON_CLK_G12A
 	help
 	  This enables support for the Amlogic S905 SoCs.
 
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index efaa70f..209c2590 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -54,3 +54,11 @@ config COMMON_CLK_AXG_AUDIO
 	help
 	  Support for the audio clock controller on AmLogic A113D devices,
 	  aka axg, Say Y if you want audio subsystem to work.
+
+config COMMON_CLK_G12A
+	bool
+	select COMMON_CLK_AMLOGIC
+	select MFD_SYSCON
+	help
+	  Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
+	  devices, aka g12a.Say Y if you want peripherals to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 0234767..7ff278d 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
+obj-$(CONFIG_COMMON_CLK_G12A)	 += g12a.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
new file mode 100644
index 0000000..f8380f5
--- /dev/null
+++ b/drivers/clk/meson/g12a.c
@@ -0,0 +1,1185 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-G12A Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "clkc.h"
+#include "g12a.h"
+
+static DEFINE_SPINLOCK(meson_clk_lock);
+
+static struct clk_regmap g12a_fixed_pll_dco = {
+	.data = &(struct meson_clk_pll_data){
+		.en = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.frac = {
+			.reg_off = HHI_FIX_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_FIX_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fixed_pll_dco",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "g12a_ee_core" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_fixed_pll = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_FIX_PLL_CNTL0,
+		.shift = 16,
+		.width = 2,
+		.flags = CLK_DIVIDER_POWER_OF_TWO,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fixed_pll",
+		.ops = &clk_regmap_divider_ro_ops,
+		.parent_names = (const char *[]){ "fixed_pll_dco" },
+		.num_parents = 1,
+		/*
+		 * This clock won't ever change at runtime so
+		 * CLK_SET_RATE_PARENT is not required
+		 */
+	},
+};
+
+/*
+ * Internal sys pll emulation configuration parameters
+ */
+static const struct reg_sequence g12a_sys_init_regs[] = {
+	{ .reg = HHI_SYS_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_SYS_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_SYS_PLL_CNTL4,	.def = 0x88770290 },
+	{ .reg = HHI_SYS_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_SYS_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_sys_pll_dco = {
+	.data = &(struct meson_clk_pll_data){
+		.en = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.l = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_SYS_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.init_regs = g12a_sys_init_regs,
+		.init_count = ARRAY_SIZE(g12a_sys_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll_dco",
+		.ops = &meson_clk_pll_ro_ops,
+		.parent_names = (const char *[]){ "g12a_ee_core" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_sys_pll = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SYS_PLL_CNTL0,
+		.shift = 16,
+		.width = 3,
+		.flags = CLK_DIVIDER_POWER_OF_TWO,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll",
+		.ops = &clk_regmap_divider_ro_ops,
+		.parent_names = (const char *[]){ "sys_pll_dco" },
+		.num_parents = 1,
+	},
+};
+
+static const struct pll_params_table g12a_gp0_pll_params_table[] = {
+	PLL_PARAMS(40, 1),
+	PLL_PARAMS(41, 1),
+	PLL_PARAMS(42, 1),
+	PLL_PARAMS(43, 1),
+	PLL_PARAMS(44, 1),
+	PLL_PARAMS(45, 1),
+	PLL_PARAMS(46, 1),
+	PLL_PARAMS(47, 1),
+	PLL_PARAMS(48, 1),
+	PLL_PARAMS(49, 1),
+	PLL_PARAMS(50, 1),
+	PLL_PARAMS(51, 1),
+	PLL_PARAMS(52, 1),
+	PLL_PARAMS(53, 1),
+	PLL_PARAMS(54, 1),
+	PLL_PARAMS(55, 1),
+	PLL_PARAMS(56, 1),
+	PLL_PARAMS(57, 1),
+	PLL_PARAMS(58, 1),
+	PLL_PARAMS(59, 1),
+	PLL_PARAMS(60, 1),
+	PLL_PARAMS(61, 1),
+	PLL_PARAMS(62, 1),
+	PLL_PARAMS(63, 1),
+	PLL_PARAMS(64, 1),
+	PLL_PARAMS(65, 1),
+	PLL_PARAMS(66, 1),
+	PLL_PARAMS(67, 1),
+	PLL_PARAMS(68, 1),
+	{ /* sentinel */ },
+};
+
+/*
+ * Internal gp0 pll emulation configuration parameters
+ */
+static const struct reg_sequence g12a_gp0_init_regs[] = {
+	{ .reg = HHI_GP0_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_GP0_PLL_CNTL3,	.def = 0x48681c00 },
+	{ .reg = HHI_GP0_PLL_CNTL4,	.def = 0x33771290 },
+	{ .reg = HHI_GP0_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_GP0_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_gp0_pll_dco = {
+	.data = &(struct meson_clk_pll_data){
+		.en = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.frac = {
+			.reg_off = HHI_GP0_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_GP0_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_params_table,
+		.init_regs = g12a_gp0_init_regs,
+		.init_count = ARRAY_SIZE(g12a_gp0_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll_dco",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "g12a_ee_core" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_gp0_pll = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_GP0_PLL_CNTL0,
+		.shift = 16,
+		.width = 3,
+		.flags = CLK_DIVIDER_POWER_OF_TWO,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gp0_pll",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "gp0_pll_dco" },
+		.num_parents = 1,
+	},
+};
+
+/*
+ * Internal hifi pll emulation configuration parameters
+ */
+static const struct reg_sequence g12a_hifi_init_regs[] = {
+	{ .reg = HHI_HIFI_PLL_CNTL1,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL2,	.def = 0x00000000 },
+	{ .reg = HHI_HIFI_PLL_CNTL3,	.def = 0x6a285c00 },
+	{ .reg = HHI_HIFI_PLL_CNTL4,	.def = 0x65771290 },
+	{ .reg = HHI_HIFI_PLL_CNTL5,	.def = 0x39272000 },
+	{ .reg = HHI_HIFI_PLL_CNTL6,	.def = 0x56540000 },
+};
+
+static struct clk_regmap g12a_hifi_pll_dco = {
+	.data = &(struct meson_clk_pll_data){
+		.en = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.frac = {
+			.reg_off = HHI_HIFI_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_HIFI_PLL_CNTL0,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = g12a_gp0_pll_params_table,
+		.init_regs = g12a_hifi_init_regs,
+		.init_count = ARRAY_SIZE(g12a_hifi_init_regs),
+		.flags = CLK_MESON_PLL_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "hifi_pll_dco",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "g12a_ee_core" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_hifi_pll = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_HIFI_PLL_CNTL0,
+		.shift = 16,
+		.width = 2,
+		.flags = CLK_DIVIDER_POWER_OF_TWO,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "hifi_pll",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "hifi_pll_dco" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div2_div = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_div",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_fclk_div2 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_FIX_PLL_CNTL1,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "fclk_div2_div" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div3_div = {
+	.mult = 1,
+	.div = 3,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div3_div",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_fclk_div3 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_FIX_PLL_CNTL1,
+		.bit_idx = 20,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div3",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "fclk_div3_div" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div4_div = {
+	.mult = 1,
+	.div = 4,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div4_div",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_fclk_div4 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_FIX_PLL_CNTL1,
+		.bit_idx = 21,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div4",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "fclk_div4_div" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div5_div = {
+	.mult = 1,
+	.div = 5,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div5_div",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_fclk_div5 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_FIX_PLL_CNTL1,
+		.bit_idx = 22,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div5",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "fclk_div5_div" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div7_div = {
+	.mult = 1,
+	.div = 7,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div7_div",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_fclk_div7 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_FIX_PLL_CNTL1,
+		.bit_idx = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div7",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "fclk_div7_div" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor g12a_fclk_div2p5_div = {
+	.mult = 2,
+	.div = 5,
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2p5_div",
+		.ops = &clk_fixed_factor_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_fclk_div2p5 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_FIX_PLL_CNTL1,
+		.bit_idx = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2p5",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "fclk_div2p5_div" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL1,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll_dco" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL1,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll1_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL3,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll_dco" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL3,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll1_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll2_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL5,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll_dco" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll2 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL5,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll2_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_mpll3_div = {
+	.data = &(struct meson_clk_mpll_data){
+		.sdm = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 0,
+			.width   = 14,
+		},
+		.sdm_en = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 30,
+			.width	 = 1,
+		},
+		.n2 = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 20,
+			.width   = 9,
+		},
+		.ssen = {
+			.reg_off = HHI_MPLL_CNTL7,
+			.shift   = 29,
+			.width	 = 1,
+		},
+		.lock = &meson_clk_lock,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3_div",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll_dco" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap g12a_mpll3 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPLL_CNTL7,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll3",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpll3_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+	"g12a_ee_core", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+	"fclk_div3", "fclk_div5"
+};
+
+static struct clk_regmap g12a_mpeg_clk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 12,
+		.table = mux_table_clk81,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_names = clk81_parent_names,
+		.num_parents = ARRAY_SIZE(clk81_parent_names),
+	},
+};
+
+static struct clk_regmap g12a_mpeg_clk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "mpeg_clk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_clk81 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_MPEG_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "clk81",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "mpeg_clk_div" },
+		.num_parents = 1,
+		.flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+	},
+};
+
+static const char * const g12a_sd_emmc_clk0_parent_names[] = {
+	"g12a_ee_core", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+	/*
+	 * Following these parent clocks, we should also have had mpll2, mpll3
+	 * and gp0_pll but these clocks are too precious to be used here. All
+	 * the necessary rates for MMC and NAND operation can be acheived using
+	 * g12a_ee_core or fclk_div clocks
+	 */
+};
+
+/* SDcard clock */
+static struct clk_regmap g12a_sd_emmc_b_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 25,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.shift = 16,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_b_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_b_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SD_EMMC_CLK_CNTL,
+		.bit_idx = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_b_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* EMMC/NAND clock */
+static struct clk_regmap g12a_sd_emmc_c_clk0_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.mask = 0x7,
+		.shift = 9,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = g12a_sd_emmc_clk0_parent_names,
+		.num_parents = ARRAY_SIZE(g12a_sd_emmc_clk0_parent_names),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.shift = 0,
+		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc_c_clk0_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_sd_emmc_c_clk0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_NAND_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_c_clk0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(g12a_ddr,			HHI_GCLK_MPEG0,	0);
+static MESON_GATE(g12a_dos,			HHI_GCLK_MPEG0,	1);
+static MESON_GATE(g12a_audio_locker,		HHI_GCLK_MPEG0,	2);
+static MESON_GATE(g12a_mipi_dsi_host,		HHI_GCLK_MPEG0,	3);
+static MESON_GATE(g12a_eth_phy,			HHI_GCLK_MPEG0,	4);
+static MESON_GATE(g12a_isa,			HHI_GCLK_MPEG0,	5);
+static MESON_GATE(g12a_pl301,			HHI_GCLK_MPEG0,	6);
+static MESON_GATE(g12a_periphs,			HHI_GCLK_MPEG0,	7);
+static MESON_GATE(g12a_spicc_0,			HHI_GCLK_MPEG0,	8);
+static MESON_GATE(g12a_i2c,			HHI_GCLK_MPEG0,	9);
+static MESON_GATE(g12a_sana,			HHI_GCLK_MPEG0,	10);
+static MESON_GATE(g12a_sd,			HHI_GCLK_MPEG0,	11);
+static MESON_GATE(g12a_rng0,			HHI_GCLK_MPEG0,	12);
+static MESON_GATE(g12a_uart0,			HHI_GCLK_MPEG0,	13);
+static MESON_GATE(g12a_spicc_1,			HHI_GCLK_MPEG0,	14);
+static MESON_GATE(g12a_hiu_reg,			HHI_GCLK_MPEG0,	19);
+static MESON_GATE(g12a_mipi_dsi_phy,		HHI_GCLK_MPEG0,	20);
+static MESON_GATE(g12a_assist_misc,		HHI_GCLK_MPEG0,	23);
+static MESON_GATE(g12a_emmc_a,			HHI_GCLK_MPEG0,	4);
+static MESON_GATE(g12a_emmc_b,			HHI_GCLK_MPEG0,	25);
+static MESON_GATE(g12a_emmc_c,			HHI_GCLK_MPEG0,	26);
+static MESON_GATE(g12a_audio_codec,		HHI_GCLK_MPEG0,	28);
+
+static MESON_GATE(g12a_audio,			HHI_GCLK_MPEG1,	0);
+static MESON_GATE(g12a_eth_core,		HHI_GCLK_MPEG1,	3);
+static MESON_GATE(g12a_demux,			HHI_GCLK_MPEG1,	4);
+static MESON_GATE(g12a_audio_ififo,		HHI_GCLK_MPEG1,	11);
+static MESON_GATE(g12a_adc,			HHI_GCLK_MPEG1,	13);
+static MESON_GATE(g12a_uart1,			HHI_GCLK_MPEG1,	16);
+static MESON_GATE(g12a_g2d,			HHI_GCLK_MPEG1,	20);
+static MESON_GATE(g12a_reset,			HHI_GCLK_MPEG1,	23);
+static MESON_GATE(g12a_pcie_comb,		HHI_GCLK_MPEG1,	24);
+static MESON_GATE(g12a_parser,			HHI_GCLK_MPEG1,	25);
+static MESON_GATE(g12a_usb_general,		HHI_GCLK_MPEG1,	26);
+static MESON_GATE(g12a_pcie_phy,		HHI_GCLK_MPEG1,	27);
+static MESON_GATE(g12a_ahb_arb0,		HHI_GCLK_MPEG1,	29);
+
+static MESON_GATE(g12a_ahb_data_bus,		HHI_GCLK_MPEG2,	1);
+static MESON_GATE(g12a_ahb_ctrl_bus,		HHI_GCLK_MPEG2,	2);
+static MESON_GATE(g12a_htx_hdcp22,		HHI_GCLK_MPEG2,	3);
+static MESON_GATE(g12a_htx_pclk,		HHI_GCLK_MPEG2,	4);
+static MESON_GATE(g12a_bt656,			HHI_GCLK_MPEG2,	6);
+static MESON_GATE(g12a_usb1_to_ddr,		HHI_GCLK_MPEG2,	8);
+static MESON_GATE(g12a_mmc_pclk,		HHI_GCLK_MPEG2,	11);
+static MESON_GATE(g12a_uart2,			HHI_GCLK_MPEG2,	15);
+static MESON_GATE(g12a_vpu_intr,		HHI_GCLK_MPEG2,	25);
+static MESON_GATE(g12a_gic,			HHI_GCLK_MPEG2,	30);
+
+static MESON_GATE(g12a_vclk2_venci0,		HHI_GCLK_OTHER,	1);
+static MESON_GATE(g12a_vclk2_venci1,		HHI_GCLK_OTHER,	2);
+static MESON_GATE(g12a_vclk2_vencp0,		HHI_GCLK_OTHER,	3);
+static MESON_GATE(g12a_vclk2_vencp1,		HHI_GCLK_OTHER,	4);
+static MESON_GATE(g12a_vclk2_venct0,		HHI_GCLK_OTHER,	5);
+static MESON_GATE(g12a_vclk2_venct1,		HHI_GCLK_OTHER,	6);
+static MESON_GATE(g12a_vclk2_other,		HHI_GCLK_OTHER,	7);
+static MESON_GATE(g12a_vclk2_enci,		HHI_GCLK_OTHER,	8);
+static MESON_GATE(g12a_vclk2_encp,		HHI_GCLK_OTHER,	9);
+static MESON_GATE(g12a_dac_clk,			HHI_GCLK_OTHER,	10);
+static MESON_GATE(g12a_aoclk_gate,		HHI_GCLK_OTHER,	14);
+static MESON_GATE(g12a_iec958_gate,		HHI_GCLK_OTHER,	16);
+static MESON_GATE(g12a_enc480p,			HHI_GCLK_OTHER,	20);
+static MESON_GATE(g12a_rng1,			HHI_GCLK_OTHER,	21);
+static MESON_GATE(g12a_vclk2_enct,		HHI_GCLK_OTHER,	22);
+static MESON_GATE(g12a_vclk2_encl,		HHI_GCLK_OTHER,	23);
+static MESON_GATE(g12a_vclk2_venclmmc,		HHI_GCLK_OTHER,	24);
+static MESON_GATE(g12a_vclk2_vencl,		HHI_GCLK_OTHER,	25);
+static MESON_GATE(g12a_vclk2_other1,		HHI_GCLK_OTHER,	26);
+
+/* Array of all clocks provided by this provider */
+static struct clk_hw_onecell_data g12a_hw_onecell_data = {
+	.hws = {
+		[CLKID_SYS_PLL]			= &g12a_sys_pll.hw,
+		[CLKID_FIXED_PLL]		= &g12a_fixed_pll.hw,
+		[CLKID_FCLK_DIV2]		= &g12a_fclk_div2.hw,
+		[CLKID_FCLK_DIV3]		= &g12a_fclk_div3.hw,
+		[CLKID_FCLK_DIV4]		= &g12a_fclk_div4.hw,
+		[CLKID_FCLK_DIV5]		= &g12a_fclk_div5.hw,
+		[CLKID_FCLK_DIV7]		= &g12a_fclk_div7.hw,
+		[CLKID_FCLK_DIV2P5]		= &g12a_fclk_div2p5.hw,
+		[CLKID_GP0_PLL]			= &g12a_gp0_pll.hw,
+		[CLKID_MPEG_SEL]		= &g12a_mpeg_clk_sel.hw,
+		[CLKID_MPEG_DIV]		= &g12a_mpeg_clk_div.hw,
+		[CLKID_CLK81]			= &g12a_clk81.hw,
+		[CLKID_MPLL0]			= &g12a_mpll0.hw,
+		[CLKID_MPLL1]			= &g12a_mpll1.hw,
+		[CLKID_MPLL2]			= &g12a_mpll2.hw,
+		[CLKID_MPLL3]			= &g12a_mpll3.hw,
+		[CLKID_DDR]			= &g12a_ddr.hw,
+		[CLKID_DOS]			= &g12a_dos.hw,
+		[CLKID_AUDIO_LOCKER]		= &g12a_audio_locker.hw,
+		[CLKID_MIPI_DSI_HOST]		= &g12a_mipi_dsi_host.hw,
+		[CLKID_ETH_PHY]			= &g12a_eth_phy.hw,
+		[CLKID_ISA]			= &g12a_isa.hw,
+		[CLKID_PL301]			= &g12a_pl301.hw,
+		[CLKID_PERIPHS]			= &g12a_periphs.hw,
+		[CLKID_SPICC0]			= &g12a_spicc_0.hw,
+		[CLKID_I2C]			= &g12a_i2c.hw,
+		[CLKID_SANA]			= &g12a_sana.hw,
+		[CLKID_SD]			= &g12a_sd.hw,
+		[CLKID_RNG0]			= &g12a_rng0.hw,
+		[CLKID_UART0]			= &g12a_uart0.hw,
+		[CLKID_SPICC1]			= &g12a_spicc_1.hw,
+		[CLKID_HIU_IFACE]		= &g12a_hiu_reg.hw,
+		[CLKID_MIPI_DSI_PHY]		= &g12a_mipi_dsi_phy.hw,
+		[CLKID_ASSIST_MISC]		= &g12a_assist_misc.hw,
+		[CLKID_SD_EMMC_A]		= &g12a_emmc_a.hw,
+		[CLKID_SD_EMMC_B]		= &g12a_emmc_b.hw,
+		[CLKID_SD_EMMC_C]		= &g12a_emmc_c.hw,
+		[CLKID_AUDIO_CODEC]		= &g12a_audio_codec.hw,
+		[CLKID_AUDIO]			= &g12a_audio.hw,
+		[CLKID_ETH]			= &g12a_eth_core.hw,
+		[CLKID_DEMUX]			= &g12a_demux.hw,
+		[CLKID_AUDIO_IFIFO]		= &g12a_audio_ififo.hw,
+		[CLKID_ADC]			= &g12a_adc.hw,
+		[CLKID_UART1]			= &g12a_uart1.hw,
+		[CLKID_G2D]			= &g12a_g2d.hw,
+		[CLKID_RESET]			= &g12a_reset.hw,
+		[CLKID_PCIE_COMB]		= &g12a_pcie_comb.hw,
+		[CLKID_PARSER]			= &g12a_parser.hw,
+		[CLKID_USB]			= &g12a_usb_general.hw,
+		[CLKID_PCIE_PHY]		= &g12a_pcie_phy.hw,
+		[CLKID_AHB_ARB0]		= &g12a_ahb_arb0.hw,
+		[CLKID_AHB_DATA_BUS]		= &g12a_ahb_data_bus.hw,
+		[CLKID_AHB_CTRL_BUS]		= &g12a_ahb_ctrl_bus.hw,
+		[CLKID_HTX_HDCP22]		= &g12a_htx_hdcp22.hw,
+		[CLKID_HTX_PCLK]		= &g12a_htx_pclk.hw,
+		[CLKID_BT656]			= &g12a_bt656.hw,
+		[CLKID_USB1_DDR_BRIDGE]		= &g12a_usb1_to_ddr.hw,
+		[CLKID_MMC_PCLK]		= &g12a_mmc_pclk.hw,
+		[CLKID_UART2]			= &g12a_uart2.hw,
+		[CLKID_VPU_INTR]		= &g12a_vpu_intr.hw,
+		[CLKID_GIC]			= &g12a_gic.hw,
+		[CLKID_SD_EMMC_B_CLK0_SEL]	= &g12a_sd_emmc_b_clk0_sel.hw,
+		[CLKID_SD_EMMC_B_CLK0_DIV]	= &g12a_sd_emmc_b_clk0_div.hw,
+		[CLKID_SD_EMMC_B_CLK0]		= &g12a_sd_emmc_b_clk0.hw,
+		[CLKID_SD_EMMC_C_CLK0_SEL]	= &g12a_sd_emmc_c_clk0_sel.hw,
+		[CLKID_SD_EMMC_C_CLK0_DIV]	= &g12a_sd_emmc_c_clk0_div.hw,
+		[CLKID_SD_EMMC_C_CLK0]		= &g12a_sd_emmc_c_clk0.hw,
+		[CLKID_MPLL0_DIV]		= &g12a_mpll0_div.hw,
+		[CLKID_MPLL1_DIV]		= &g12a_mpll1_div.hw,
+		[CLKID_MPLL2_DIV]		= &g12a_mpll2_div.hw,
+		[CLKID_MPLL3_DIV]		= &g12a_mpll3_div.hw,
+		[CLKID_FCLK_DIV2_DIV]		= &g12a_fclk_div2_div.hw,
+		[CLKID_FCLK_DIV3_DIV]		= &g12a_fclk_div3_div.hw,
+		[CLKID_FCLK_DIV4_DIV]		= &g12a_fclk_div4_div.hw,
+		[CLKID_FCLK_DIV5_DIV]		= &g12a_fclk_div5_div.hw,
+		[CLKID_FCLK_DIV7_DIV]		= &g12a_fclk_div7_div.hw,
+		[CLKID_FCLK_DIV2P5_DIV]		= &g12a_fclk_div2p5_div.hw,
+		[CLKID_HIFI_PLL]		= &g12a_hifi_pll.hw,
+		[CLKID_VCLK2_VENCI0]		= &g12a_vclk2_venci0.hw,
+		[CLKID_VCLK2_VENCI1]		= &g12a_vclk2_venci1.hw,
+		[CLKID_VCLK2_VENCP0]		= &g12a_vclk2_vencp0.hw,
+		[CLKID_VCLK2_VENCP1]		= &g12a_vclk2_vencp1.hw,
+		[CLKID_VCLK2_VENCT0]		= &g12a_vclk2_venct0.hw,
+		[CLKID_VCLK2_VENCT1]		= &g12a_vclk2_venct1.hw,
+		[CLKID_VCLK2_OTHER]		= &g12a_vclk2_other.hw,
+		[CLKID_VCLK2_ENCI]		= &g12a_vclk2_enci.hw,
+		[CLKID_VCLK2_ENCP]		= &g12a_vclk2_encp.hw,
+		[CLKID_DAC_CLK]			= &g12a_dac_clk.hw,
+		[CLKID_AOCLK]			= &g12a_aoclk_gate.hw,
+		[CLKID_IEC958]			= &g12a_iec958_gate.hw,
+		[CLKID_ENC480P]			= &g12a_enc480p.hw,
+		[CLKID_RNG1]			= &g12a_rng1.hw,
+		[CLKID_VCLK2_ENCT]		= &g12a_vclk2_enct.hw,
+		[CLKID_VCLK2_ENCL]		= &g12a_vclk2_encl.hw,
+		[CLKID_VCLK2_VENCLMMC]		= &g12a_vclk2_venclmmc.hw,
+		[CLKID_VCLK2_VENCL]		= &g12a_vclk2_vencl.hw,
+		[CLKID_VCLK2_OTHER1]		= &g12a_vclk2_other1.hw,
+		[CLKID_FIXED_PLL_DCO]		= &g12a_fixed_pll_dco.hw,
+		[CLKID_SYS_PLL_DCO]		= &g12a_sys_pll_dco.hw,
+		[CLKID_GP0_PLL_DCO]		= &g12a_gp0_pll_dco.hw,
+		[CLKID_HIFI_PLL_DCO]		= &g12a_hifi_pll_dco.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const g12a_clk_regmaps[] = {
+	&g12a_clk81,
+	&g12a_dos,
+	&g12a_ddr,
+	&g12a_audio_locker,
+	&g12a_mipi_dsi_host,
+	&g12a_eth_phy,
+	&g12a_isa,
+	&g12a_pl301,
+	&g12a_periphs,
+	&g12a_spicc_0,
+	&g12a_i2c,
+	&g12a_sana,
+	&g12a_sd,
+	&g12a_rng0,
+	&g12a_uart0,
+	&g12a_spicc_1,
+	&g12a_hiu_reg,
+	&g12a_mipi_dsi_phy,
+	&g12a_assist_misc,
+	&g12a_emmc_a,
+	&g12a_emmc_b,
+	&g12a_emmc_c,
+	&g12a_audio_codec,
+	&g12a_audio,
+	&g12a_eth_core,
+	&g12a_demux,
+	&g12a_audio_ififo,
+	&g12a_adc,
+	&g12a_uart1,
+	&g12a_g2d,
+	&g12a_reset,
+	&g12a_pcie_comb,
+	&g12a_parser,
+	&g12a_usb_general,
+	&g12a_pcie_phy,
+	&g12a_ahb_arb0,
+	&g12a_ahb_data_bus,
+	&g12a_ahb_ctrl_bus,
+	&g12a_htx_hdcp22,
+	&g12a_htx_pclk,
+	&g12a_bt656,
+	&g12a_usb1_to_ddr,
+	&g12a_mmc_pclk,
+	&g12a_vpu_intr,
+	&g12a_gic,
+	&g12a_sd_emmc_b_clk0,
+	&g12a_sd_emmc_c_clk0,
+	&g12a_mpeg_clk_div,
+	&g12a_sd_emmc_b_clk0_div,
+	&g12a_sd_emmc_c_clk0_div,
+	&g12a_mpeg_clk_sel,
+	&g12a_sd_emmc_b_clk0_sel,
+	&g12a_sd_emmc_c_clk0_sel,
+	&g12a_mpll0,
+	&g12a_mpll1,
+	&g12a_mpll2,
+	&g12a_mpll3,
+	&g12a_mpll0_div,
+	&g12a_mpll1_div,
+	&g12a_mpll2_div,
+	&g12a_mpll3_div,
+	&g12a_fixed_pll,
+	&g12a_sys_pll,
+	&g12a_gp0_pll,
+	&g12a_hifi_pll,
+	&g12a_vclk2_venci0,
+	&g12a_vclk2_venci1,
+	&g12a_vclk2_vencp0,
+	&g12a_vclk2_vencp1,
+	&g12a_vclk2_venct0,
+	&g12a_vclk2_venct1,
+	&g12a_vclk2_other,
+	&g12a_vclk2_enci,
+	&g12a_vclk2_encp,
+	&g12a_dac_clk,
+	&g12a_aoclk_gate,
+	&g12a_iec958_gate,
+	&g12a_enc480p,
+	&g12a_rng1,
+	&g12a_vclk2_enct,
+	&g12a_vclk2_encl,
+	&g12a_vclk2_venclmmc,
+	&g12a_vclk2_vencl,
+	&g12a_vclk2_other1,
+	&g12a_fixed_pll_dco,
+	&g12a_sys_pll_dco,
+	&g12a_gp0_pll_dco,
+	&g12a_hifi_pll_dco,
+	&g12a_fclk_div2,
+	&g12a_fclk_div3,
+	&g12a_fclk_div4,
+	&g12a_fclk_div5,
+	&g12a_fclk_div7,
+	&g12a_fclk_div2p5,
+};
+
+static const struct clk_ops g12a_clk_no_ops = {};
+
+static struct clk_hw *g12a_clk_hw_register_bypass
+				(struct device *dev,
+				const char *name,
+				const char *parent_name)
+{
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	char *clk_name;
+	int ret;
+
+	hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
+	if (!hw)
+		return ERR_PTR(-ENOMEM);
+
+	clk_name = kasprintf(GFP_KERNEL, "g12a_%s", name);
+	if (!clk_name)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = clk_name;
+	init.ops = &g12a_clk_no_ops;
+	init.flags = 0;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+	hw->init = &init;
+
+	ret = devm_clk_hw_register(dev, hw);
+	kfree(clk_name);
+
+	return ret ? ERR_PTR(ret) : hw;
+}
+
+static const struct of_device_id clkc_match_table[] = {
+	{ .compatible = "amlogic,g12a-clkc" },
+	{}
+};
+
+static const struct regmap_config clkc_regmap_config = {
+	.reg_bits       = 32,
+	.val_bits       = 32,
+	.reg_stride     = 4,
+};
+
+static int g12a_clkc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *map;
+	struct clk *clk;
+	struct clk_hw *hw;
+	int ret, i;
+
+	/* Get the hhi system controller node */
+	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	if (IS_ERR(map)) {
+		dev_err(dev,
+			"failed to get HHI regmap\n");
+		return PTR_ERR(map);
+	}
+
+	clk = devm_clk_get(dev, "core");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	hw = g12a_clk_hw_register_bypass(dev, "ee_core", __clk_get_name(clk));
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	g12a_hw_onecell_data.hws[CLKID_EE_CORE] = hw;
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(g12a_clk_regmaps); i++)
+		g12a_clk_regmaps[i]->map = map;
+
+	for (i = 0; i < g12a_hw_onecell_data.num; i++) {
+		/* array might be sparse */
+		if (!g12a_hw_onecell_data.hws[i])
+			continue;
+
+		ret = devm_clk_hw_register(dev, g12a_hw_onecell_data.hws[i]);
+		if (ret) {
+			dev_err(dev, "Clock registration failed\n");
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &g12a_hw_onecell_data);
+}
+
+static struct platform_driver g12a_driver = {
+	.probe		= g12a_clkc_probe,
+	.driver		= {
+		.name	= "g12a-clkc",
+		.of_match_table = clkc_match_table,
+	},
+};
+
+builtin_platform_driver(g12a_driver);
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
new file mode 100644
index 0000000..9afb417
--- /dev/null
+++ b/drivers/clk/meson/g12a.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 Amlogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ */
+#ifndef __G12A_H
+#define __G12A_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_MIPI_CNTL0			0x000
+#define HHI_MIPI_CNTL1			0x004
+#define HHI_MIPI_CNTL2			0x008
+#define HHI_MIPI_STS			0x00C
+#define HHI_GP0_PLL_CNTL0		0x040
+#define HHI_GP0_PLL_CNTL1		0x044
+#define HHI_GP0_PLL_CNTL2		0x048
+#define HHI_GP0_PLL_CNTL3		0x04C
+#define HHI_GP0_PLL_CNTL4		0x050
+#define HHI_GP0_PLL_CNTL5		0x054
+#define HHI_GP0_PLL_CNTL6		0x058
+#define HHI_GP0_PLL_STS			0x05C
+#define HHI_PCIE_PLL_CNTL0		0x098
+#define HHI_PCIE_PLL_CNTL1		0x09C
+#define HHI_PCIE_PLL_CNTL2		0x0A0
+#define HHI_PCIE_PLL_CNTL3		0x0A4
+#define HHI_PCIE_PLL_CNTL4		0x0A8
+#define HHI_PCIE_PLL_CNTL5		0x0AC
+#define HHI_PCIE_PLL_STS		0x0B8
+#define HHI_HIFI_PLL_CNTL0		0x0D8
+#define HHI_HIFI_PLL_CNTL1		0x0DC
+#define HHI_HIFI_PLL_CNTL2		0x0E0
+#define HHI_HIFI_PLL_CNTL3		0x0E4
+#define HHI_HIFI_PLL_CNTL4		0x0E8
+#define HHI_HIFI_PLL_CNTL5		0x0EC
+#define HHI_HIFI_PLL_CNTL6		0x0F0
+#define HHI_GCLK_MPEG0			0x140
+#define HHI_GCLK_MPEG1			0x144
+#define HHI_GCLK_MPEG2			0x148
+#define HHI_GCLK_OTHER			0x150
+#define HHI_MPEG_CLK_CNTL		0x174
+#define HHI_AUD_CLK_CNTL		0x178
+#define HHI_VID_CLK_CNTL		0x17c
+#define HHI_TS_CLK_CNTL			0x190
+#define HHI_VID_CLK_CNTL2		0x194
+#define HHI_SYS_CPU_CLK_CNTL0		0x19c
+#define HHI_MALI_CLK_CNTL		0x1b0
+#define HHI_VPU_CLKC_CNTL		0x1b4
+#define HHI_VPU_CLK_CNTL		0x1bC
+#define HHI_HDMI_CLK_CNTL		0x1CC
+#define HHI_VDEC_CLK_CNTL		0x1E0
+#define HHI_VDEC2_CLK_CNTL		0x1E4
+#define HHI_VDEC3_CLK_CNTL		0x1E8
+#define HHI_VDEC4_CLK_CNTL		0x1EC
+#define HHI_HDCP22_CLK_CNTL		0x1F0
+#define HHI_VAPBCLK_CNTL		0x1F4
+#define HHI_VPU_CLKB_CNTL		0x20C
+#define HHI_GEN_CLK_CNTL		0x228
+#define HHI_VDIN_MEAS_CLK_CNTL		0x250
+#define HHI_MIPIDSI_PHY_CLK_CNTL	0x254
+#define HHI_NAND_CLK_CNTL		0x25C
+#define HHI_SD_EMMC_CLK_CNTL		0x264
+#define HHI_MPLL_CNTL0			0x278
+#define HHI_MPLL_CNTL1			0x27C
+#define HHI_MPLL_CNTL2			0x280
+#define HHI_MPLL_CNTL3			0x284
+#define HHI_MPLL_CNTL4			0x288
+#define HHI_MPLL_CNTL5			0x28c
+#define HHI_MPLL_CNTL6			0x290
+#define HHI_MPLL_CNTL7			0x294
+#define HHI_MPLL_CNTL8			0x298
+#define HHI_FIX_PLL_CNTL0		0x2A0
+#define HHI_FIX_PLL_CNTL1		0x2A4
+#define HHI_SYS_PLL_CNTL0		0x2f4
+#define HHI_SYS_PLL_CNTL1		0x2f8
+#define HHI_SYS_PLL_CNTL2		0x2fc
+#define HHI_SYS_PLL_CNTL3		0x300
+#define HHI_SYS_PLL_CNTL4		0x304
+#define HHI_SYS_PLL_CNTL5		0x308
+#define HHI_SYS_PLL_CNTL6		0x30c
+#define HHI_SPICC_CLK_CNTL		0x3dc
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/g12a-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL				8
+#define CLKID_MPEG_DIV				9
+#define CLKID_SD_EMMC_B_CLK0_SEL		62
+#define CLKID_SD_EMMC_B_CLK0_DIV		63
+#define CLKID_SD_EMMC_C_CLK0_SEL		64
+#define CLKID_SD_EMMC_C_CLK0_DIV		65
+#define CLKID_MPLL0_DIV				66
+#define CLKID_MPLL1_DIV				67
+#define CLKID_MPLL2_DIV				68
+#define CLKID_MPLL3_DIV				69
+#define CLKID_MPLL_PREDIV			70
+#define CLKID_FCLK_DIV2_DIV			72
+#define CLKID_FCLK_DIV3_DIV			73
+#define CLKID_FCLK_DIV4_DIV			74
+#define CLKID_FCLK_DIV5_DIV			75
+#define CLKID_FCLK_DIV7_DIV			76
+#define CLKID_FCLK_DIV2P5_DIV			97
+#define CLKID_FIXED_PLL_DCO			98
+#define CLKID_SYS_PLL_DCO			99
+#define CLKID_GP0_PLL_DCO			100
+#define CLKID_HIFI_PLL_DCO			101
+/* CLKID_EE_XTAL equal NR_CLKS plus one */
+#define CLKID_EE_CORE				103
+
+#define NR_CLKS					102
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/g12a-clkc.h>
+
+#endif /* __G12A_H */
-- 
1.9.1

Re: [PATCH v5 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Rob Herring]

On Thu, Nov 29, 2018 at 09:41:56PM +0800, Jian Hu wrote:
> Add new clock controller compatible and dt-bingdings headers
> for the Everything-Else domain of the g12a SoC
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---
>  .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
>  include/dt-bindings/clock/g12a-clkc.h              | 93 ++++++++++++++++++++++
>  2 files changed, 94 insertions(+)
>  create mode 100644 include/dt-bindings/clock/g12a-clkc.h

Please add acks/reviewed-bys when posting new versions.

Rob

Re: [PATCH v5 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jian Hu]

Hi, Rob

I will add it in next version, thanks.

On 2018/12/4 7:06, Rob Herring wrote:
> On Thu, Nov 29, 2018 at 09:41:56PM +0800, Jian Hu wrote:
>> Add new clock controller compatible and dt-bingdings headers
>> for the Everything-Else domain of the g12a SoC
>>
>> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
>> ---
>>   .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
>>   include/dt-bindings/clock/g12a-clkc.h              | 93 ++++++++++++++++++++++
>>   2 files changed, 94 insertions(+)
>>   create mode 100644 include/dt-bindings/clock/g12a-clkc.h
> 
> Please add acks/reviewed-bys when posting new versions.
> 
> Rob
> 
> .
> 

Re: [PATCH v5 1/2] dt-bindings: clk: meson-g12a: Add G12A EE Clock Bindings

[Jerome Brunet]

On Thu, 2018-11-29 at 21:41 +0800, Jian Hu wrote:
> Add new clock controller compatible and dt-bingdings headers
> for the Everything-Else domain of the g12a SoC
> 
> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
> ---
>  .../bindings/clock/amlogic,gxbb-clkc.txt           |  1 +
>  include/dt-bindings/clock/g12a-clkc.h              | 93
> ++++++++++++++++++++++
>  2 files changed, 94 insertions(+)
>  create mode 100644 include/dt-bindings/clock/g12a-clkc.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> index e950599..0833006 100644
> --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
> @@ -9,6 +9,7 @@ Required Properties:
>  		"amlogic,gxbb-clkc" for GXBB SoC,
>  		"amlogic,gxl-clkc" for GXL and GXM SoC,
>  		"amlogic,axg-clkc" for AXG SoC.
> +		"amlogic,g12a-clkc" for G12A SoC.


Binding description is not aligned with what the driver does.
If you are going take clock input from DT, it needs to be documented.

In the meantime this has been done [0] for you but you'll have to rebase.

[0]: 20181203171640.12110-3-jbrunet@baylibre.com

>  
>  - #clock-cells: should be 1.
>  
> diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-
> bindings/clock/g12a-clkc.h
> new file mode 100644
> index 0000000..b55e6e1
> --- /dev/null
> +++ b/include/dt-bindings/clock/g12a-clkc.h
> @@ -0,0 +1,93 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Meson-G12A clock tree IDs
> + *
> + * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
> + */
> +
> +#ifndef __G12A_CLKC_H
> +#define __G12A_CLKC_H
> +
> +#define CLKID_SYS_PLL				0
> +#define CLKID_FIXED_PLL				1
> +#define CLKID_FCLK_DIV2				2
> +#define CLKID_FCLK_DIV3				3
> +#define CLKID_FCLK_DIV4				4
> +#define CLKID_FCLK_DIV5				5
> +#define CLKID_FCLK_DIV7				6
> +#define CLKID_GP0_PLL				7
> +#define CLKID_CLK81				10
> +#define CLKID_MPLL0				11
> +#define CLKID_MPLL1				12
> +#define CLKID_MPLL2				13
> +#define CLKID_MPLL3				14
> +#define CLKID_DDR				15
> +#define CLKID_DOS				16
> +#define CLKID_AUDIO_LOCKER			17
> +#define CLKID_MIPI_DSI_HOST			18
> +#define CLKID_ETH_PHY				19
> +#define CLKID_ISA				20
> +#define CLKID_PL301				21
> +#define CLKID_PERIPHS				22
> +#define CLKID_SPICC0				23
> +#define CLKID_I2C				24
> +#define CLKID_SANA				25
> +#define CLKID_SD				26
> +#define CLKID_RNG0				27
> +#define CLKID_UART0				28
> +#define CLKID_SPICC1				29
> +#define CLKID_HIU_IFACE				30
> +#define CLKID_MIPI_DSI_PHY			31
> +#define CLKID_ASSIST_MISC			32
> +#define CLKID_SD_EMMC_A				33
> +#define CLKID_SD_EMMC_B				34
> +#define CLKID_SD_EMMC_C				35
> +#define CLKID_AUDIO_CODEC			36
> +#define CLKID_AUDIO				37
> +#define CLKID_ETH				38
> +#define CLKID_DEMUX				39
> +#define CLKID_AUDIO_IFIFO			40
> +#define CLKID_ADC				41
> +#define CLKID_UART1				42
> +#define CLKID_G2D				43
> +#define CLKID_RESET				44
> +#define CLKID_PCIE_COMB				45
> +#define CLKID_PARSER				46
> +#define CLKID_USB				47
> +#define CLKID_PCIE_PHY				48
> +#define CLKID_AHB_ARB0				49
> +#define CLKID_AHB_DATA_BUS			50
> +#define CLKID_AHB_CTRL_BUS			51
> +#define CLKID_HTX_HDCP22			52
> +#define CLKID_HTX_PCLK				53
> +#define CLKID_BT656				54
> +#define CLKID_USB1_DDR_BRIDGE			55
> +#define CLKID_MMC_PCLK				56
> +#define CLKID_UART2				57
> +#define CLKID_VPU_INTR				58
> +#define CLKID_GIC				59
> +#define CLKID_SD_EMMC_B_CLK0			60
> +#define CLKID_SD_EMMC_C_CLK0			61
> +#define CLKID_HIFI_PLL				71
> +#define CLKID_VCLK2_VENCI0			77
> +#define CLKID_VCLK2_VENCI1			78
> +#define CLKID_VCLK2_VENCP0			79
> +#define CLKID_VCLK2_VENCP1			80
> +#define CLKID_VCLK2_VENCT0			81
> +#define CLKID_VCLK2_VENCT1			82
> +#define CLKID_VCLK2_OTHER			83
> +#define CLKID_VCLK2_ENCI			84
> +#define CLKID_VCLK2_ENCP			85
> +#define CLKID_DAC_CLK				86
> +#define CLKID_AOCLK				87
> +#define CLKID_IEC958				88
> +#define CLKID_ENC480P				89
> +#define CLKID_RNG1				90
> +#define CLKID_VCLK2_ENCT			91
> +#define CLKID_VCLK2_ENCL			92
> +#define CLKID_VCLK2_VENCLMMC			93
> +#define CLKID_VCLK2_VENCL			94
> +#define CLKID_VCLK2_OTHER1			95
> +#define CLKID_FCLK_DIV2P5			96
> +
> +#endif /* __G12A_CLKC_H */