linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: Linux 2.6.28-rc1
@ 2008-10-24 18:10 Rufus & Azrael
  0 siblings, 0 replies; 22+ messages in thread
From: Rufus & Azrael @ 2008-10-24 18:10 UTC (permalink / raw)
  To: Linux-kernel Mailing List, Ingo Molnar

[-- Attachment #1: Type: text/plain, Size: 94 bytes --]

Hi all,


Here are my compilation warnings and section mismatches for 2.6.28-rc1.

Regards.



[-- Attachment #2: section_mismatch_2_6_28-rc1 --]
[-- Type: text/plain, Size: 4842 bytes --]

arch/x86/kernel/cpu/mtrr/main.c: In function ‘mtrr_cleanup’:
arch/x86/kernel/cpu/mtrr/main.c:1363: attention : ‘gran_factor’ may be used uninitialized in this function
arch/x86/kernel/cpu/mtrr/main.c:1364: attention : ‘gran_base’ may be used uninitialized in this function

fixed by patch in http://marc.info/?l=linux-kernel&m=122394648405506&w=2 but not yet in mainline
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING: kernel/built-in.o(.text+0x14d39): Section mismatch in reference from the function reserve_region_with_split() to the function .init.text:__reserve_region_with_split()
The function reserve_region_with_split() references
the function __init __reserve_region_with_split().
This is often because reserve_region_with_split lacks a __init 
annotation or the annotation of __reserve_region_with_split is wrong.

WARNING: vmlinux.o(.text+0x38469): Section mismatch in reference from the function reserve_region_with_split() to the function .init.text:__reserve_region_with_split()
The function reserve_region_with_split() references
the function __init __reserve_region_with_split().
This is often because reserve_region_with_split lacks a __init 
annotation or the annotation of __reserve_region_with_split is wrong.

fixed by patch in http://lkml.org/lkml/2008/10/12/38 but not yet in mainline 
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING: drivers/built-in.o(.init.text+0xaf2f): Section mismatch in reference from the function hid_init() to the function .exit.text:hidraw_exit()
The function __init hid_init() references
a function __exit hidraw_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
hidraw_exit() so it may be used outside an exit section.

WARNING: drivers/hid/hid.o(.init.text+0x5e): Section mismatch in reference from the function hid_init() to the function .exit.text:hidraw_exit()
The function __init hid_init() references
a function __exit hidraw_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
hidraw_exit() so it may be used outside an exit section.

WARNING: vmlinux.o(.init.text+0x2598a): Section mismatch in reference from the function hid_init() to the function .exit.text:hidraw_exit()
The function __init hid_init() references
a function __exit hidraw_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
hidraw_exit() so it may be used outside an exit section.

fixed by patch in http://marc.info/?l=linux-kernel&m=122425994132500&w=2 but not yet in mainline
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x347): Section mismatch in reference from the function fpu_init() to the function .init.text:init_thread_xstate()
The function __cpuinit fpu_init() references
a function __init init_thread_xstate().
If init_thread_xstate is only used by fpu_init then
annotate init_thread_xstate with a matching annotation.

WARNING: vmlinux.o(.cpuinit.text+0x605): Section mismatch in reference from the function fpu_init() to the function .init.text:init_thread_xstate()
The function __cpuinit fpu_init() references
a function __init init_thread_xstate().
If init_thread_xstate is only used by fpu_init then
annotate init_thread_xstate with a matching annotation.

WARNING: kernel/built-in.o(.text+0x10838): Section mismatch in reference from the function notify_cpu_starting() to the variable .cpuinit.data:cpu_chain
The function notify_cpu_starting() references
the variable __cpuinitdata cpu_chain.
This is often because notify_cpu_starting lacks a __cpuinitdata 
annotation or the annotation of cpu_chain is wrong.

WARNING: vmlinux.o(.text+0x33f68): Section mismatch in reference from the function notify_cpu_starting() to the variable .cpuinit.data:cpu_chain
The function notify_cpu_starting() references
the variable __cpuinitdata cpu_chain.
This is often because notify_cpu_starting lacks a __cpuinitdata 
annotation or the annotation of cpu_chain is wrong.

fixed by patch in http://lkml.org/lkml/2008/10/22/654 but not yet in mainline
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 23:01   ` Arjan van de Ven
@ 2008-10-26 13:17     ` Tony Vroon
  0 siblings, 0 replies; 22+ messages in thread
From: Tony Vroon @ 2008-10-26 13:17 UTC (permalink / raw)
  To: Arjan van de Ven; +Cc: Linux Kernel Mailing List, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 540 bytes --]

On Fri, 2008-10-24 at 16:01 -0700, Arjan van de Ven wrote:
> I suspect these are totally innocent; the reason I think this is that
> select/poll only get used once you hit userspace... and you're hanging
> way before that.

Entirely correct. It seems commit
4403b406d4369a275d483ece6ddee0088cc0d592 by Linus just fixed it for me.
My boot hang is gone.

Linux prometheus 2.6.28-rc1-00005-g23cf24c #1 SMP Sun Oct 26 13:12:55
GMT 2008 x86_64 Quad-Core AMD Opteron(tm) Processor 2354 AuthenticAMD
GNU/Linux

Regards,
Tony V.



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 19:15   ` Sam Ravnborg
@ 2008-10-24 23:44     ` Alistair John Strachan
  0 siblings, 0 replies; 22+ messages in thread
From: Alistair John Strachan @ 2008-10-24 23:44 UTC (permalink / raw)
  To: Sam Ravnborg; +Cc: Linus Torvalds, Linux Kernel Mailing List

On Friday 24 October 2008 20:15:52 Sam Ravnborg wrote:
> On Fri, Oct 24, 2008 at 12:24:38PM +0100, Alistair John Strachan wrote:
> > On Friday 24 October 2008 05:10:29 Linus Torvalds wrote:
> > > It's been two weeks, so it's time to close the merge window. A
> > > 2.6.28-rc1 is out there, and it's hopefully all good.
> >
> > It seems if you have a broken asm/ symlink in include/ (which happened as
> > a result of the x86 header moves, for me) the kernel won't try to update
> > it appropriately, and this breaks "make prepare".
> >
> > $ make    ARCH=x86_64 prepare
> >   CHK     include/linux/version.h
> >   CHK     include/linux/utsrelease.h
> >   GEN     include/asm/asm-offsets.h
> > /bin/sh: include/asm/asm-offsets.h: No such file or directory
> > make[1]: *** [include/asm/asm-offsets.h] Error 1
> > make: *** [prepare0] Error 2
> >
> > rm -f include/asm fixes it
> >
> > This was just from taking a 2.6.27 tree, git clean -d -f, git pull, make
> > oldconfig. Might be a nice thing to fix?
>
> The following patch add another special case hwre we delete stale symlinks.
> In my limited testing it fixes the issue - can you try to give it a spin.

Fixes it here, thanks.

-- 
Cheers,
Alistair.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 22:53 ` Tony Vroon
@ 2008-10-24 23:01   ` Arjan van de Ven
  2008-10-26 13:17     ` Tony Vroon
  0 siblings, 1 reply; 22+ messages in thread
From: Arjan van de Ven @ 2008-10-24 23:01 UTC (permalink / raw)
  To: Tony Vroon; +Cc: Linux Kernel Mailing List, Thomas Gleixner

On Fri, 24 Oct 2008 23:53:28 +0100
Tony Vroon <tony@vroon.org> wrote:

> On Thu, 2008-10-23 at 21:10 -0700, Linus Torvalds wrote:
> > It's been two weeks, so it's time to close the merge window. A
> > 2.6.28-rc1 is out there, and it's hopefully all good.
> 
> I'm afraid it fails to boot here entirely.
> Gets as far as:
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
> hpet0: 3 32-bit timers, 25000000 Hz
> 
> And it sits there, instead of showing me it switched into
> high-resolution mode as expected:
> Switched to high resolution mode on CPU 0
> Switched to high resolution mode on CPU 4
> Switched to high resolution mode on CPU 2
> Switched to high resolution mode on CPU 3
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 5
> Switched to high resolution mode on CPU 7
> Switched to high resolution mode on CPU 6
> 
> I'll go and bisect now if it doesn't ring any bells. It's a dual
> quad-core Opteron 2354 on a Tyan n6650W (S2915-E), BIOS 2.07
> I've attached .config; personally I'm suspecting commit
> 1f6d6e8ebe73ba9d9d4c693f7f6f50f661dbd6e4 as I booted a tree from
> Wednesday without issue.
> 
> No accusation as I can't back that up yet. Any patches that you want
> me to try and revert first?

I suspect these are totally innocent; the reason I think this is that
select/poll only get used once you hit userspace... and you're hanging
way before that.


-- 
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24  4:10 Linus Torvalds
                   ` (2 preceding siblings ...)
  2008-10-24 17:09 ` Matt Mackall
@ 2008-10-24 22:53 ` Tony Vroon
  2008-10-24 23:01   ` Arjan van de Ven
  3 siblings, 1 reply; 22+ messages in thread
From: Tony Vroon @ 2008-10-24 22:53 UTC (permalink / raw)
  To: Linux Kernel Mailing List; +Cc: Thomas Gleixner, Arjan van de Ven


[-- Attachment #1.1: Type: text/plain, Size: 1164 bytes --]

On Thu, 2008-10-23 at 21:10 -0700, Linus Torvalds wrote:
> It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1 
> is out there, and it's hopefully all good.

I'm afraid it fails to boot here entirely.
Gets as far as:
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz

And it sits there, instead of showing me it switched into
high-resolution mode as expected:
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 4
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 5
Switched to high resolution mode on CPU 7
Switched to high resolution mode on CPU 6

I'll go and bisect now if it doesn't ring any bells. It's a dual
quad-core Opteron 2354 on a Tyan n6650W (S2915-E), BIOS 2.07
I've attached .config; personally I'm suspecting commit
1f6d6e8ebe73ba9d9d4c693f7f6f50f661dbd6e4 as I booted a tree from
Wednesday without issue.

No accusation as I can't back that up yet. Any patches that you want me to try and revert first?

Regards,
Tony V.

[-- Attachment #1.2: .config --]
[-- Type: text/plain, Size: 47455 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc1
# Fri Oct 24 18:20:46 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_AMD_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=9
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_INTR_REMAP=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_EEPROM_93CX6=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
CONFIG_RTL8180=y
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1360
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=10
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_HP_DISK is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
CONFIG_STAGING=y
# CONFIG_ME4000 is not set
# CONFIG_USB_IP_COMMON is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_USB_ATMEL is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4DEV_COMPAT=y
# CONFIG_EXT4_FS_XATTR is not set
CONFIG_JBD=y
CONFIG_JBD2=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 22:31         ` David Miller
@ 2008-10-24 22:51           ` Sam Ravnborg
  0 siblings, 0 replies; 22+ messages in thread
From: Sam Ravnborg @ 2008-10-24 22:51 UTC (permalink / raw)
  To: David Miller; +Cc: torvalds, alistair, rjw, linux-kernel

On Fri, Oct 24, 2008 at 03:31:39PM -0700, David Miller wrote:
> From: Linus Torvalds <torvalds@linux-foundation.org>
> Date: Fri, 24 Oct 2008 08:17:53 -0700 (PDT)
> 
> > Now, _another_ part (and arguably the really core reason) of this problem 
> > is that our Makefile rules for the asm include directory is weak and 
> > unreliable in the presense of already-existing unexpected entries.
> 
> I guess we could use seperate "stamp" files to deal with this.
> 
> Along with the generated file "foo" there is a "foo.stamp" file
> that is generated with "touch" after "foo" is built.

I remember I made an attempt doing so long time ago for
the asm symlink. But why it failed for me I dunno.

We used this trick in many archs before
but as part of the header move to arch/$ARCH we have killed
almost all uses of symlink to reach certain files.

The asm symlink is only used by asm-offsett.h for most archs these
days and when I get around to it I will fix that too so we
can kill it entirely.

But first we need to move all archs headers to arch/$ARCH.
And we are getting there.

	Sam

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 15:17       ` Linus Torvalds
  2008-10-24 19:22         ` Sam Ravnborg
@ 2008-10-24 22:31         ` David Miller
  2008-10-24 22:51           ` Sam Ravnborg
  1 sibling, 1 reply; 22+ messages in thread
From: David Miller @ 2008-10-24 22:31 UTC (permalink / raw)
  To: torvalds; +Cc: alistair, rjw, linux-kernel

From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 24 Oct 2008 08:17:53 -0700 (PDT)

> Now, _another_ part (and arguably the really core reason) of this problem 
> is that our Makefile rules for the asm include directory is weak and 
> unreliable in the presense of already-existing unexpected entries.

I guess we could use seperate "stamp" files to deal with this.

Along with the generated file "foo" there is a "foo.stamp" file
that is generated with "touch" after "foo" is built.

Then "foo"'s update rule is whether the "foo.stamp" is out of date
wrt. it's dependencies.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 15:17       ` Linus Torvalds
@ 2008-10-24 19:22         ` Sam Ravnborg
  2008-10-24 22:31         ` David Miller
  1 sibling, 0 replies; 22+ messages in thread
From: Sam Ravnborg @ 2008-10-24 19:22 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Alistair John Strachan, Rafael J. Wysocki, Linux Kernel Mailing List

On Fri, Oct 24, 2008 at 08:17:53AM -0700, Linus Torvalds wrote:
> 
> You can use "git clean -dfx" to force git to remove ignored files too. And 
> "make distclean" should have done it too.

I just checked and make mrproper / make distclean deletes the symlink
as expected.

> Now, _another_ part (and arguably the really core reason) of this problem 
> is that our Makefile rules for the asm include directory is weak and 
> unreliable in the presense of already-existing unexpected entries.
> 
> And it has caused problems before. For example, if you somehow made the 
> symlink not be a symlink at all (by using "cp -LR" for example), or a 
> symlink pointing to another architecture (changing architecture builds in 
> the same tree without doing a "make clean" in between), you historically 
> got really odd results.

We do not cover the "asm symlink became a dir" problem.
But when all archs has moved headers it is anyway implicitly covered.

	Sam

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 11:24 ` Alistair John Strachan
  2008-10-24 11:45   ` Rafael J. Wysocki
@ 2008-10-24 19:15   ` Sam Ravnborg
  2008-10-24 23:44     ` Alistair John Strachan
  1 sibling, 1 reply; 22+ messages in thread
From: Sam Ravnborg @ 2008-10-24 19:15 UTC (permalink / raw)
  To: Alistair John Strachan; +Cc: Linus Torvalds, Linux Kernel Mailing List

On Fri, Oct 24, 2008 at 12:24:38PM +0100, Alistair John Strachan wrote:
> On Friday 24 October 2008 05:10:29 Linus Torvalds wrote:
> > It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1
> > is out there, and it's hopefully all good.
> 
> It seems if you have a broken asm/ symlink in include/ (which happened as a 
> result of the x86 header moves, for me) the kernel won't try to update it 
> appropriately, and this breaks "make prepare".
> 
> $ make    ARCH=x86_64 prepare                                                                                                   
>   CHK     include/linux/version.h                                                                                                                            
>   CHK     include/linux/utsrelease.h                                                                                                                         
>   GEN     include/asm/asm-offsets.h                                                                                                                          
> /bin/sh: include/asm/asm-offsets.h: No such file or directory                                                                                                
> make[1]: *** [include/asm/asm-offsets.h] Error 1                                                                                                             
> make: *** [prepare0] Error 2
> 
> rm -f include/asm fixes it
> 
> This was just from taking a 2.6.27 tree, git clean -d -f, git pull, make 
> oldconfig. Might be a nice thing to fix?

The following patch add another special case hwre we delete stale symlinks.
In my limited testing it fixes the issue - can you try to give it a spin.

	Sam

diff --git a/Makefile b/Makefile
index f6703f1..9dc7427 100644
--- a/Makefile
+++ b/Makefile
@@ -961,6 +961,7 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
 
 # The asm symlink changes when $(ARCH) changes.
 # Detect this and ask user to run make mrproper
+# If asm is a stale symlink (point to dir that does not exist) remove it
 define check-symlink
 	set -e;                                                            \
 	if [ -L include/asm ]; then                                        \
@@ -970,6 +971,7 @@ define check-symlink
 			echo "       set ARCH or save .config and run 'make mrproper' to fix it";             \
 			exit 1;                                            \
 		fi;                                                        \
+		test -e $$asmlink || rm include/asm;                       \
 	fi
 endef
 

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 18:05       ` Fenghua Yu
@ 2008-10-24 18:11         ` Matt Mackall
  0 siblings, 0 replies; 22+ messages in thread
From: Matt Mackall @ 2008-10-24 18:11 UTC (permalink / raw)
  To: Fenghua Yu
  Cc: Linus Torvalds, Randy Dunlap, Linux Kernel Mailing List,
	Ingo Molnar, David Woodhouse

On Fri, 2008-10-24 at 11:05 -0700, Fenghua Yu wrote:
> On Fri, Oct 24, 2008 at 10:57:45AM -0700, Randy Dunlap wrote:
> > Matt Mackall wrote:
> > > On Fri, 2008-10-24 at 12:10 -0500, Matt Mackall wrote:
> > >> On Thu, 2008-10-23 at 21:10 -0700, Linus Torvalds wrote:
> > >>> It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1 
> > >>> is out there, and it's hopefully all good.
> > >> This fails building on allnoconfig on at least x86-64 because forbid_dac
> > >> used by arch/x86/kernel/pci-dma.c is defined off in
> > >> drivers/pci/quirks.c, which isn't built if CONFIG_PCI isn't set.
> > > 
> > > (Also fails on x86-32)
> > > 
> > > Bisection points to: 
> > > 
> > > 5b6985ce8ec7127b4d60ad450b64ca8b82748a3b
> > > intel-iommu: IA64 support
> > 
> > Patch for this has been posted.  I don't have it handy ATM.
> > 
> 
> Yes, the fix patch has been posted yesterday. And it has been merged into linux-next tree already. In case you need it, I post it here again.

Thanks, works for me.

-- 
Mathematics is the supreme nostalgia of our time.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24  4:14 ` Roland Dreier
@ 2008-10-24 18:08   ` Greg KH
  0 siblings, 0 replies; 22+ messages in thread
From: Greg KH @ 2008-10-24 18:08 UTC (permalink / raw)
  To: Roland Dreier; +Cc: Linus Torvalds, Linux Kernel Mailing List

On Thu, Oct 23, 2008 at 09:14:51PM -0700, Roland Dreier wrote:
>  >  - Most screwed-up clock award goes to:
>  > 
>  > 	Greg Kroah-Hartman
>  > 
>  >    for his commit 51b90540, which claims to be from April 9 - six years 
>  >    ago! And it's a fix to a driver that was merged this July!
> 
> Maybe that commit really is from a time before printk supported the
> "%zd" format for size_t :)

Heh :(

Sorry about this, stupid "default date for my patch" script messed up.
I suck at bash scripting at times...

greg k-h

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 17:57     ` Randy Dunlap
@ 2008-10-24 18:05       ` Fenghua Yu
  2008-10-24 18:11         ` Matt Mackall
  0 siblings, 1 reply; 22+ messages in thread
From: Fenghua Yu @ 2008-10-24 18:05 UTC (permalink / raw)
  To: Linus Torvalds, Randy Dunlap
  Cc: Matt Mackall, Linux Kernel Mailing List, Ingo Molnar, David Woodhouse

On Fri, Oct 24, 2008 at 10:57:45AM -0700, Randy Dunlap wrote:
> Matt Mackall wrote:
> > On Fri, 2008-10-24 at 12:10 -0500, Matt Mackall wrote:
> >> On Thu, 2008-10-23 at 21:10 -0700, Linus Torvalds wrote:
> >>> It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1 
> >>> is out there, and it's hopefully all good.
> >> This fails building on allnoconfig on at least x86-64 because forbid_dac
> >> used by arch/x86/kernel/pci-dma.c is defined off in
> >> drivers/pci/quirks.c, which isn't built if CONFIG_PCI isn't set.
> > 
> > (Also fails on x86-32)
> > 
> > Bisection points to: 
> > 
> > 5b6985ce8ec7127b4d60ad450b64ca8b82748a3b
> > intel-iommu: IA64 support
> 
> Patch for this has been posted.  I don't have it handy ATM.
> 

Yes, the fix patch has been posted yesterday. And it has been merged into linux-next tree already. In case you need it, I post it here again.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>

---

 arch/ia64/include/asm/iommu.h |    1 -
 arch/ia64/kernel/pci-dma.c    |    7 -------
 arch/x86/include/asm/iommu.h  |    1 -
 arch/x86/kernel/pci-dma.c     |   16 ++++++++++++++++
 drivers/pci/pci.h             |    0 
 drivers/pci/quirks.c          |   14 --------------
 6 files changed, 16 insertions(+), 23 deletions(-)

diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h
index 5fb2bb9..0490794 100644
--- a/arch/ia64/include/asm/iommu.h
+++ b/arch/ia64/include/asm/iommu.h
@@ -11,6 +11,5 @@ extern int force_iommu, no_iommu;
 extern int iommu_detected;
 extern void iommu_dma_init(void);
 extern void machvec_init(const char *name);
-extern int forbid_dac;
 
 #endif
diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
index 10a75b5..031abbf 100644
--- a/arch/ia64/kernel/pci-dma.c
+++ b/arch/ia64/kernel/pci-dma.c
@@ -89,13 +89,6 @@ int iommu_dma_supported(struct device *dev, u64 mask)
 {
 	struct dma_mapping_ops *ops = get_dma_ops(dev);
 
-#ifdef CONFIG_PCI
-	if (mask > 0xffffffff && forbid_dac > 0) {
-		dev_info(dev, "Disallowing DAC for device\n");
-		return 0;
-	}
-#endif
-
 	if (ops->dma_supported_op)
 		return ops->dma_supported_op(dev, mask);
 
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1972266..1926248 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -9,6 +9,8 @@
 #include <asm/calgary.h>
 #include <asm/amd_iommu.h>
 
+static int forbid_dac __read_mostly;
+
 struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
@@ -291,3 +293,17 @@ void pci_iommu_shutdown(void)
 }
 /* Must execute after PCI subsystem */
 fs_initcall(pci_iommu_init);
+
+#ifdef CONFIG_PCI
+/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
+
+static __devinit void via_no_dac(struct pci_dev *dev)
+{
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
+		printk(KERN_INFO "PCI: VIA PCI bridge detected."
+				 "Disabling DAC.\n");
+		forbid_dac = 1;
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
+#endif
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 96cf8ec..bbf66ea 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -43,20 +43,6 @@ static void __devinit quirk_mellanox_tavor(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor);
 
-/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
-int forbid_dac __read_mostly;
-EXPORT_SYMBOL(forbid_dac);
-
-static __devinit void via_no_dac(struct pci_dev *dev)
-{
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
-		dev_info(&dev->dev,
-			"VIA PCI bridge detected. Disabling DAC.\n");
-		forbid_dac = 1;
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
-
 /* Deal with broken BIOS'es that neglect to enable passive release,
    which can cause problems in combination with the 82441FX/PPro MTRRs */
 static void quirk_passive_release(struct pci_dev *dev)
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
index 2daaffc..9a118bf 100644
--- a/arch/x86/include/asm/iommu.h
+++ b/arch/x86/include/asm/iommu.h
@@ -7,7 +7,6 @@ extern struct dma_mapping_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
 extern int dmar_disabled;
-extern int forbid_dac;
 
 extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len);
 

^ permalink raw reply related	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 17:54   ` Matt Mackall
@ 2008-10-24 17:57     ` Randy Dunlap
  2008-10-24 18:05       ` Fenghua Yu
  0 siblings, 1 reply; 22+ messages in thread
From: Randy Dunlap @ 2008-10-24 17:57 UTC (permalink / raw)
  To: Matt Mackall
  Cc: Linus Torvalds, Linux Kernel Mailing List, Ingo Molnar,
	Fenghua Yu, David Woodhouse

Matt Mackall wrote:
> On Fri, 2008-10-24 at 12:10 -0500, Matt Mackall wrote:
>> On Thu, 2008-10-23 at 21:10 -0700, Linus Torvalds wrote:
>>> It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1 
>>> is out there, and it's hopefully all good.
>> This fails building on allnoconfig on at least x86-64 because forbid_dac
>> used by arch/x86/kernel/pci-dma.c is defined off in
>> drivers/pci/quirks.c, which isn't built if CONFIG_PCI isn't set.
> 
> (Also fails on x86-32)
> 
> Bisection points to: 
> 
> 5b6985ce8ec7127b4d60ad450b64ca8b82748a3b
> intel-iommu: IA64 support

Patch for this has been posted.  I don't have it handy ATM.

~Randy

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 17:09 ` Matt Mackall
@ 2008-10-24 17:54   ` Matt Mackall
  2008-10-24 17:57     ` Randy Dunlap
  0 siblings, 1 reply; 22+ messages in thread
From: Matt Mackall @ 2008-10-24 17:54 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: Linux Kernel Mailing List, Ingo Molnar, Fenghua Yu, David Woodhouse

On Fri, 2008-10-24 at 12:10 -0500, Matt Mackall wrote:
> On Thu, 2008-10-23 at 21:10 -0700, Linus Torvalds wrote:
> > It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1 
> > is out there, and it's hopefully all good.
> 
> This fails building on allnoconfig on at least x86-64 because forbid_dac
> used by arch/x86/kernel/pci-dma.c is defined off in
> drivers/pci/quirks.c, which isn't built if CONFIG_PCI isn't set.

(Also fails on x86-32)

Bisection points to: 

5b6985ce8ec7127b4d60ad450b64ca8b82748a3b
intel-iommu: IA64 support

-- 
Mathematics is the supreme nostalgia of our time.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24  4:10 Linus Torvalds
  2008-10-24  4:14 ` Roland Dreier
  2008-10-24 11:24 ` Alistair John Strachan
@ 2008-10-24 17:09 ` Matt Mackall
  2008-10-24 17:54   ` Matt Mackall
  2008-10-24 22:53 ` Tony Vroon
  3 siblings, 1 reply; 22+ messages in thread
From: Matt Mackall @ 2008-10-24 17:09 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List, Ingo Molnar

On Thu, 2008-10-23 at 21:10 -0700, Linus Torvalds wrote:
> It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1 
> is out there, and it's hopefully all good.

This fails building on allnoconfig on at least x86-64 because forbid_dac
used by arch/x86/kernel/pci-dma.c is defined off in
drivers/pci/quirks.c, which isn't built if CONFIG_PCI isn't set.

-- 
Mathematics is the supreme nostalgia of our time.


^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 12:52     ` Alistair John Strachan
  2008-10-24 13:13       ` Alexey Dobriyan
@ 2008-10-24 15:17       ` Linus Torvalds
  2008-10-24 19:22         ` Sam Ravnborg
  2008-10-24 22:31         ` David Miller
  1 sibling, 2 replies; 22+ messages in thread
From: Linus Torvalds @ 2008-10-24 15:17 UTC (permalink / raw)
  To: Alistair John Strachan; +Cc: Rafael J. Wysocki, Linux Kernel Mailing List



On Fri, 24 Oct 2008, Alistair John Strachan wrote:
> 
> git reset --hard v2.6.27 ; git clean -d -f
> git status ("Nothing to commit")

The problem is ignored files.

Yes, git claims everything is clean, but that's because it has been told 
to ignore certain files, and because it has been told to ignore them, it 
will not remove them (without the -x flag) in "git clean", nor will it 
mention them in "git status".

And yes, one of the ignored file patterns is

	include/asm-*/asm-offsets.h

which means that your "git clean -df" didn't *really* clean everything 
from the old include/asm-x86, and because it didn't clean it all it also 
wouldn't be able to remove the old stale directory - since it wasn't 
empty.

You can use "git clean -dfx" to force git to remove ignored files too. And 
"make distclean" should have done it too.

Now, _another_ part (and arguably the really core reason) of this problem 
is that our Makefile rules for the asm include directory is weak and 
unreliable in the presense of already-existing unexpected entries.

And it has caused problems before. For example, if you somehow made the 
symlink not be a symlink at all (by using "cp -LR" for example), or a 
symlink pointing to another architecture (changing architecture builds in 
the same tree without doing a "make clean" in between), you historically 
got really odd results.

In fact, it's broken in subtle way before to the point where we now have a 
special "check-symlink" target internally that checks that the symlink is 
correctly set up.

Of course, it didn't check that you had some old stuff in include/asm-x86, 
it only checks for the _traditional_ problems we've had. Not some new odd 
one.

		Linus

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 12:52     ` Alistair John Strachan
@ 2008-10-24 13:13       ` Alexey Dobriyan
  2008-10-24 15:17       ` Linus Torvalds
  1 sibling, 0 replies; 22+ messages in thread
From: Alexey Dobriyan @ 2008-10-24 13:13 UTC (permalink / raw)
  To: Alistair John Strachan
  Cc: Rafael J. Wysocki, Linus Torvalds, Linux Kernel Mailing List

On Fri, Oct 24, 2008 at 01:52:45PM +0100, Alistair John Strachan wrote:
> On Friday 24 October 2008 12:45:04 Rafael J. Wysocki wrote:
> > On Friday, 24 of October 2008, Alistair John Strachan wrote:
> > > On Friday 24 October 2008 05:10:29 Linus Torvalds wrote:
> > > > It's been two weeks, so it's time to close the merge window. A
> > > > 2.6.28-rc1 is out there, and it's hopefully all good.
> > >
> > > It seems if you have a broken asm/ symlink in include/ (which happened as
> > > a result of the x86 header moves, for me) the kernel won't try to update
> > > it appropriately, and this breaks "make prepare".
> > >
> > > $ make    ARCH=x86_64 prepare
> > >   CHK     include/linux/version.h
> > >   CHK     include/linux/utsrelease.h
> > >   GEN     include/asm/asm-offsets.h
> > > /bin/sh: include/asm/asm-offsets.h: No such file or directory
> > > make[1]: *** [include/asm/asm-offsets.h] Error 1
> > > make: *** [prepare0] Error 2
> > >
> > > rm -f include/asm fixes it
> > >
> > > This was just from taking a 2.6.27 tree, git clean -d -f, git pull, make
> > > oldconfig. Might be a nice thing to fix?
> >
> > Hm, I didn't have any problems with compiling .28-rc1 on x86_64.
> >
> > [Confused.]
> 
> This should reproduce it (whether or not it's a use-case we care about is 
> another matter). First, make sure your include/asm symlink has been removed, 
> then execute the following sequence:
> 
> git reset --hard v2.6.27 ; git clean -d -f
> git status ("Nothing to commit")
> 
> cp /path/to/config .config
> make oldconfig prepare
> git clean -d -f ; git reset --hard
> git status ("Nothing to commit")
> 
> Observe at this point that include/asm is valid and points to include/asm-x86, 
> despite the clean and reset (I guess this file is being ignored). Now:
> 
> git reset --hard v2.6.28-rc1 (Or whatever other method you might choose)
> git clean -d -f (Removes include/asm-x86)
> 
> Observe at this point that include/asm is now invalid, and still points to the 
> removed include/asm-x86 directory.
> 
> cp /path/to/config .config
> make oldconfig prepare
> 
> Should fail at this point:
> 
> scripts/kconfig/conf -o arch/x86/Kconfig
> #
> # configuration written to .config
> #
> scripts/kconfig/conf -s arch/x86/Kconfig
>   CHK     include/linux/version.h
>   UPD     include/linux/version.h
>   CHK     include/linux/utsrelease.h
>   UPD     include/linux/utsrelease.h
>   CC      kernel/bounds.s
>   GEN     include/linux/bounds.h
>   CC      arch/x86/kernel/asm-offsets.s
>   GEN     include/asm/asm-offsets.h
> /bin/sh: include/asm/asm-offsets.h: No such file or directory
> make[2]: *** [include/asm/asm-offsets.h] Error 1
> make[1]: *** [prepare0] Error 2
> make: *** [prepare] Error 2
> 
> Can you confirm?
> 
> I checked out Makefile and I believe it occurs because the current checks only 
> make sure a symlink exists, and if it does exist that its target matches up 
> with the selected architecture. It doesn't actually check the destination of 
> the symlink is valid.
> 
> I'd suggest that it should do that too, and if the destination doesn't exist, 
> re-write the symlink when it does "mkdir include/asm-x86" further down, but 
> I'm not a kbuild expert.

Use this script for super-clean project-agnostic clean:

	$ cat ~/bin/git-mrproper
	#!/bin/sh
	git-ls-files -o --directory -z | xargs -0 rm -rf


I'd say nothing should be done here, include/asm symlink autochange
because of different ARCH was unsupported due to it being "big" event, and
headers move is equally "big" event.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 11:45   ` Rafael J. Wysocki
@ 2008-10-24 12:52     ` Alistair John Strachan
  2008-10-24 13:13       ` Alexey Dobriyan
  2008-10-24 15:17       ` Linus Torvalds
  0 siblings, 2 replies; 22+ messages in thread
From: Alistair John Strachan @ 2008-10-24 12:52 UTC (permalink / raw)
  To: Rafael J. Wysocki; +Cc: Linus Torvalds, Linux Kernel Mailing List

On Friday 24 October 2008 12:45:04 Rafael J. Wysocki wrote:
> On Friday, 24 of October 2008, Alistair John Strachan wrote:
> > On Friday 24 October 2008 05:10:29 Linus Torvalds wrote:
> > > It's been two weeks, so it's time to close the merge window. A
> > > 2.6.28-rc1 is out there, and it's hopefully all good.
> >
> > It seems if you have a broken asm/ symlink in include/ (which happened as
> > a result of the x86 header moves, for me) the kernel won't try to update
> > it appropriately, and this breaks "make prepare".
> >
> > $ make    ARCH=x86_64 prepare
> >   CHK     include/linux/version.h
> >   CHK     include/linux/utsrelease.h
> >   GEN     include/asm/asm-offsets.h
> > /bin/sh: include/asm/asm-offsets.h: No such file or directory
> > make[1]: *** [include/asm/asm-offsets.h] Error 1
> > make: *** [prepare0] Error 2
> >
> > rm -f include/asm fixes it
> >
> > This was just from taking a 2.6.27 tree, git clean -d -f, git pull, make
> > oldconfig. Might be a nice thing to fix?
>
> Hm, I didn't have any problems with compiling .28-rc1 on x86_64.
>
> [Confused.]

This should reproduce it (whether or not it's a use-case we care about is 
another matter). First, make sure your include/asm symlink has been removed, 
then execute the following sequence:

git reset --hard v2.6.27 ; git clean -d -f
git status ("Nothing to commit")

cp /path/to/config .config
make oldconfig prepare
git clean -d -f ; git reset --hard
git status ("Nothing to commit")

Observe at this point that include/asm is valid and points to include/asm-x86, 
despite the clean and reset (I guess this file is being ignored). Now:

git reset --hard v2.6.28-rc1 (Or whatever other method you might choose)
git clean -d -f (Removes include/asm-x86)

Observe at this point that include/asm is now invalid, and still points to the 
removed include/asm-x86 directory.

cp /path/to/config .config
make oldconfig prepare

Should fail at this point:

scripts/kconfig/conf -o arch/x86/Kconfig
#
# configuration written to .config
#
scripts/kconfig/conf -s arch/x86/Kconfig
  CHK     include/linux/version.h
  UPD     include/linux/version.h
  CHK     include/linux/utsrelease.h
  UPD     include/linux/utsrelease.h
  CC      kernel/bounds.s
  GEN     include/linux/bounds.h
  CC      arch/x86/kernel/asm-offsets.s
  GEN     include/asm/asm-offsets.h
/bin/sh: include/asm/asm-offsets.h: No such file or directory
make[2]: *** [include/asm/asm-offsets.h] Error 1
make[1]: *** [prepare0] Error 2
make: *** [prepare] Error 2

Can you confirm?

I checked out Makefile and I believe it occurs because the current checks only 
make sure a symlink exists, and if it does exist that its target matches up 
with the selected architecture. It doesn't actually check the destination of 
the symlink is valid.

I'd suggest that it should do that too, and if the destination doesn't exist, 
re-write the symlink when it does "mkdir include/asm-x86" further down, but 
I'm not a kbuild expert.

-- 
Cheers,
Alistair.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24 11:24 ` Alistair John Strachan
@ 2008-10-24 11:45   ` Rafael J. Wysocki
  2008-10-24 12:52     ` Alistair John Strachan
  2008-10-24 19:15   ` Sam Ravnborg
  1 sibling, 1 reply; 22+ messages in thread
From: Rafael J. Wysocki @ 2008-10-24 11:45 UTC (permalink / raw)
  To: Alistair John Strachan; +Cc: Linus Torvalds, Linux Kernel Mailing List

On Friday, 24 of October 2008, Alistair John Strachan wrote:
> On Friday 24 October 2008 05:10:29 Linus Torvalds wrote:
> > It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1
> > is out there, and it's hopefully all good.
> 
> It seems if you have a broken asm/ symlink in include/ (which happened as a 
> result of the x86 header moves, for me) the kernel won't try to update it 
> appropriately, and this breaks "make prepare".
> 
> $ make    ARCH=x86_64 prepare                                                                                                   
>   CHK     include/linux/version.h                                                                                                                            
>   CHK     include/linux/utsrelease.h                                                                                                                         
>   GEN     include/asm/asm-offsets.h                                                                                                                          
> /bin/sh: include/asm/asm-offsets.h: No such file or directory                                                                                                
> make[1]: *** [include/asm/asm-offsets.h] Error 1                                                                                                             
> make: *** [prepare0] Error 2
> 
> rm -f include/asm fixes it
> 
> This was just from taking a 2.6.27 tree, git clean -d -f, git pull, make 
> oldconfig. Might be a nice thing to fix?

Hm, I didn't have any problems with compiling .28-rc1 on x86_64.

[Confused.]

Rafael

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24  4:10 Linus Torvalds
  2008-10-24  4:14 ` Roland Dreier
@ 2008-10-24 11:24 ` Alistair John Strachan
  2008-10-24 11:45   ` Rafael J. Wysocki
  2008-10-24 19:15   ` Sam Ravnborg
  2008-10-24 17:09 ` Matt Mackall
  2008-10-24 22:53 ` Tony Vroon
  3 siblings, 2 replies; 22+ messages in thread
From: Alistair John Strachan @ 2008-10-24 11:24 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List

On Friday 24 October 2008 05:10:29 Linus Torvalds wrote:
> It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1
> is out there, and it's hopefully all good.

It seems if you have a broken asm/ symlink in include/ (which happened as a 
result of the x86 header moves, for me) the kernel won't try to update it 
appropriately, and this breaks "make prepare".

$ make    ARCH=x86_64 prepare                                                                                                   
  CHK     include/linux/version.h                                                                                                                            
  CHK     include/linux/utsrelease.h                                                                                                                         
  GEN     include/asm/asm-offsets.h                                                                                                                          
/bin/sh: include/asm/asm-offsets.h: No such file or directory                                                                                                
make[1]: *** [include/asm/asm-offsets.h] Error 1                                                                                                             
make: *** [prepare0] Error 2

rm -f include/asm fixes it

This was just from taking a 2.6.27 tree, git clean -d -f, git pull, make 
oldconfig. Might be a nice thing to fix?

-- 
Cheers,
Alistair.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: Linux 2.6.28-rc1
  2008-10-24  4:10 Linus Torvalds
@ 2008-10-24  4:14 ` Roland Dreier
  2008-10-24 18:08   ` Greg KH
  2008-10-24 11:24 ` Alistair John Strachan
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 22+ messages in thread
From: Roland Dreier @ 2008-10-24  4:14 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List

 >  - Most screwed-up clock award goes to:
 > 
 > 	Greg Kroah-Hartman
 > 
 >    for his commit 51b90540, which claims to be from April 9 - six years 
 >    ago! And it's a fix to a driver that was merged this July!

Maybe that commit really is from a time before printk supported the
"%zd" format for size_t :)

 - R.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Linux 2.6.28-rc1
@ 2008-10-24  4:10 Linus Torvalds
  2008-10-24  4:14 ` Roland Dreier
                   ` (3 more replies)
  0 siblings, 4 replies; 22+ messages in thread
From: Linus Torvalds @ 2008-10-24  4:10 UTC (permalink / raw)
  To: Linux Kernel Mailing List


It's been two weeks, so it's time to close the merge window. A 2.6.28-rc1 
is out there, and it's hopefully all good.

The changes in -rc1 are (as usual) too many to really enumerate, with the 
bulk of them being - again as usual - drivers. In fact, that's doubly true 
now that we merged the drivers from the staging tree. The dirstat output 
makes that very obvious:

   3.3% arch/arm/
  14.2% arch/
   3.1% crypto/
   4.0% drivers/media/
   3.7% drivers/net/wireless/
  10.3% drivers/net/
   6.5% drivers/staging/me4000/
   8.5% drivers/staging/slicoss/
   4.8% drivers/staging/wlan-ng/
  29.7% drivers/staging/
  63.6% drivers/
   3.3% include/
   4.6% net/
   4.6% sound/

but some other statistics may be fun: 

 - 7141 non-merge commits (and 419 merges)

 - average non-merge commit:
	39 lines removed, 104 lines added
   (not counting renames)

 - About 880 individual authors
	- 340 of which had just one commit
	- while 183 authors had ten or more commits

 - Most screwed-up clock award goes to:

	Greg Kroah-Hartman

   for his commit 51b90540, which claims to be from April 9 - six years 
   ago! And it's a fix to a driver that was merged this July!

Way to go, Greg!

Anyway, have fun, please test it, and report any intersting anomalies you 
find.

			Linus

^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2008-10-26 13:17 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-10-24 18:10 Linux 2.6.28-rc1 Rufus & Azrael
  -- strict thread matches above, loose matches on Subject: below --
2008-10-24  4:10 Linus Torvalds
2008-10-24  4:14 ` Roland Dreier
2008-10-24 18:08   ` Greg KH
2008-10-24 11:24 ` Alistair John Strachan
2008-10-24 11:45   ` Rafael J. Wysocki
2008-10-24 12:52     ` Alistair John Strachan
2008-10-24 13:13       ` Alexey Dobriyan
2008-10-24 15:17       ` Linus Torvalds
2008-10-24 19:22         ` Sam Ravnborg
2008-10-24 22:31         ` David Miller
2008-10-24 22:51           ` Sam Ravnborg
2008-10-24 19:15   ` Sam Ravnborg
2008-10-24 23:44     ` Alistair John Strachan
2008-10-24 17:09 ` Matt Mackall
2008-10-24 17:54   ` Matt Mackall
2008-10-24 17:57     ` Randy Dunlap
2008-10-24 18:05       ` Fenghua Yu
2008-10-24 18:11         ` Matt Mackall
2008-10-24 22:53 ` Tony Vroon
2008-10-24 23:01   ` Arjan van de Ven
2008-10-26 13:17     ` Tony Vroon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).