* JMicron SATA controller not available - bisected
@ 2009-05-27 2:56 Marc Dionne
0 siblings, 0 replies; only message in thread
From: Marc Dionne @ 2009-05-27 2:56 UTC (permalink / raw)
To: linux-kernel; +Cc: yu.zhao
With current git the SATA DVD writer on my system is no longer detected,
and these errors show up:
pci 0000:05:00.0: BAR 2: can't allocate resource
pci 0000:05:00.0: BAR 3: can't allocate resource
ahci 0000:05:00.0: device not available because of BAR 2 [0x00-0x07]
collisions
.. where 05:00.0 is this SATA controller where the DVD is plugged in:
05:00.0 SATA controller: JMicron Technologies, Inc. 20360/20363 Serial
ATA Controller (rev 03)
This is an ICH10-based board that has the JMicron controller in addition
to the onboard SATA. The drive works fine if plugged into one of the
onboard ports, and also works fine with kernel 2.6.29 on the JMicron
controller.
I bisected the problem down to this commit:
480b93b7837fb3cf0579a42f4953ac463a5b9e1e: PCI: centralize device setup code
Note that this worked with recent 2.6.30-rc kernels until I had to reset
the board's CMOS, so a change in a BIOS setting was probably a trigger.
Marc
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-05-27 2:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-05-27 2:56 JMicron SATA controller not available - bisected Marc Dionne
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).