linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
@ 2010-02-23  8:29 Ákos Maróy
  2010-02-23 21:17 ` Rafael J. Wysocki
  0 siblings, 1 reply; 22+ messages in thread
From: Ákos Maróy @ 2010-02-23  8:29 UTC (permalink / raw)
  To: linux-kernel

Hi,

I wonder if this is the write place to post this issue to, but I have a
proplem when trying go suspend or hibernate my system. after enabling
pm_trace by:

echo 1 > /sys/power/pm_trace

and then issuing pm-suspend, I get the following in dmesg:

[  685.833275] PM: Entering mem sleep
[  685.833292] Suspending console(s) (use no_console_suspend to debug)
[  685.993399] pm_op(): usb_dev_suspend+0x0/0x10 returns -2
[  685.993404] PM: Device usb2 failed to suspend: error -2
[  685.993408] PM: Some devices failed to suspend
[  685.997009] PM: resume devices took 0.000 seconds
[  685.997169] PM: Finishing wakeup.

this is on 2.6.32.8, but on 2.6.33-rc8 I get the same results.

trying to find out what device this is:

$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0bda:0159 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 04f2:b16c Chicony Electronics Co., Ltd
Bus 001 Device 005: ID 03f0:231d Hewlett-Packard
Bus 001 Device 002: ID 8087:0020
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

my persumption is that "Device usb2" would be device 002 on bus 001
above, that is, 8087:0020. googling for this USB id I found some
references here: http://forum.notebookreview.com/showthread.php?p=5906076 :

Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub


I wonder what could be done to make this device not sabotage the suspend
process?


Akos

^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2010-03-04 13:55 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-02-23  8:29 pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020 Ákos Maróy
2010-02-23 21:17 ` Rafael J. Wysocki
2010-02-24 16:40   ` Alan Stern
2010-02-24 22:36     ` Ákos Maróy
2010-02-25 15:27       ` Alan Stern
2010-02-25 16:43         ` Ákos Maróy
2010-02-25 17:46           ` Alan Stern
2010-02-25 19:04             ` Sarah Sharp
2010-02-25 19:36               ` Alan Stern
2010-02-25 19:52                 ` Sarah Sharp
2010-02-25 22:37                   ` Ákos Maróy
2010-02-26  0:16                     ` Sarah Sharp
2010-02-26 16:12                       ` Alan Stern
2010-02-26 16:32                         ` Sarah Sharp
2010-02-27  8:02                       ` Ákos Maróy
2010-03-02  0:48                         ` Sarah Sharp
2010-02-25 21:05             ` Ákos Maróy
2010-02-25 22:23               ` Alan Stern
2010-02-25 17:07         ` Ákos Maróy
2010-03-04 13:55         ` Ákos Maróy
2010-02-26  5:21       ` Edward Shao
2010-02-27  8:03         ` Ákos Maróy

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).