Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)

linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
@ 2011-01-23 14:28 Ozan Çağlayan
  2011-01-23 15:00 ` Richard Schütz
                   ` (2 more replies)
  0 siblings, 3 replies; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-23 14:28 UTC (permalink / raw)
  To: linux-acpi, linux-kernel, platform-driver-x86, rjw

Hi,

I'm getting a lot of bug reports about hanging boot/shutdowns on these days.

Most of the affected hardware are ASUS laptops. The problem is that I 
don't have access to any of those problematic laptops and the users are 
not able at all to debug/bisect what is going on. However, I have 
collected dmesgs of good/bad boots, acpidump, etc.

Here are the current status:

"Asus F50SV does not boot unless lapic is passed"
   https://bugzilla.kernel.org/show_bug.cgi?id=26502

"Regression between 2.6.35-020635-rc1 and 2.6.35-020635 breaks acpi 
support on Asus X71 laptop"
   https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/689796

"Asus N61JQ hangs at shutdown unless lapic is passed"
(Not reported upstream yet, I've only downstream bug report which is 
Turkish)
   http://bugs.pardus.org.tr/show_bug.cgi?id=15969

"Asus X61S does not boot unless acpi=off is given"
(Not reported upstream yet, I've only downstream bug report which is 
Turkish)
   http://bugs.pardus.org.tr/show_bug.cgi?id=16322
(I've told the reporter to try with nolapic, it will probably fix the 
issue but until confirmed acpi=off is the only solution. 2.6.36 was fine)

I'll post more bugs in here as I've found them.

Thanks,

-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-23 14:28 Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops) Ozan Çağlayan
@ 2011-01-23 15:00 ` Richard Schütz
  2011-01-23 15:11   ` Gene Heskett
  2011-01-23 16:49   ` Ozan Çağlayan
  2011-01-23 16:56 ` Ozan Çağlayan
  2011-01-23 20:24 ` Ozan Çağlayan
  2 siblings, 2 replies; 47+ messages in thread
From: Richard Schütz @ 2011-01-23 15:00 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: linux-acpi, linux-kernel, platform-driver-x86, rjw

> Hi,
>
> I'm getting a lot of bug reports about hanging boot/shutdowns on these
> days.
>
> Most of the affected hardware are ASUS laptops. The problem is that I
> don't have access to any of those problematic laptops and the users are
> not able at all to debug/bisect what is going on. However, I have
> collected dmesgs of good/bad boots, acpidump, etc.
>
> Here are the current status:
>
> "Asus F50SV does not boot unless lapic is passed"
> https://bugzilla.kernel.org/show_bug.cgi?id=26502
>
> "Regression between 2.6.35-020635-rc1 and 2.6.35-020635 breaks acpi
> support on Asus X71 laptop"
> https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/689796
>
> "Asus N61JQ hangs at shutdown unless lapic is passed"
> (Not reported upstream yet, I've only downstream bug report which is
> Turkish)
> http://bugs.pardus.org.tr/show_bug.cgi?id=15969
>
> "Asus X61S does not boot unless acpi=off is given"
> (Not reported upstream yet, I've only downstream bug report which is
> Turkish)
> http://bugs.pardus.org.tr/show_bug.cgi?id=16322
> (I've told the reporter to try with nolapic, it will probably fix the
> issue but until confirmed acpi=off is the only solution. 2.6.36 was fine)
>
> I'll post more bugs in here as I've found them.
>
> Thanks,
>

Looks like these are all Intel machines. Do they use intel_idle for the 
CPU powersaving features?
(cat /sys/devices/system/cpu/cpuidle/current_driver)

If yes - does booting with intel_idle.max_cstate=0 or 
intel_idle.max_cstate=3 boot parameter help?

It could be related to https://bugzilla.kernel.org/show_bug.cgi?id=21952 
somehow, which seems to be an 2.6.35 regression.

-- 
Regards,
Richard Schütz

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-23 15:00 ` Richard Schütz
@ 2011-01-23 15:11   ` Gene Heskett
  2011-01-23 16:49   ` Ozan Çağlayan
  1 sibling, 0 replies; 47+ messages in thread
From: Gene Heskett @ 2011-01-23 15:11 UTC (permalink / raw)
  To: linux-kernel

On Sunday, January 23, 2011, Richard Schütz wrote:
>> Hi,
>> 
>> I'm getting a lot of bug reports about hanging boot/shutdowns on these
>> days.
>> 
>> Most of the affected hardware are ASUS laptops. The problem is that I
>> don't have access to any of those problematic laptops and the users are
>> not able at all to debug/bisect what is going on. However, I have
>> collected dmesgs of good/bad boots, acpidump, etc.
>> 
>> Here are the current status:
>> 
>> "Asus F50SV does not boot unless lapic is passed"
>> https://bugzilla.kernel.org/show_bug.cgi?id=26502
>> 
>> "Regression between 2.6.35-020635-rc1 and 2.6.35-020635 breaks acpi
>> support on Asus X71 laptop"
>> https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/689796
>> 
>> "Asus N61JQ hangs at shutdown unless lapic is passed"
>> (Not reported upstream yet, I've only downstream bug report which is
>> Turkish)
>> http://bugs.pardus.org.tr/show_bug.cgi?id=15969
>> 
>> "Asus X61S does not boot unless acpi=off is given"
>> (Not reported upstream yet, I've only downstream bug report which is
>> Turkish)
>> http://bugs.pardus.org.tr/show_bug.cgi?id=16322
>> (I've told the reporter to try with nolapic, it will probably fix the
>> issue but until confirmed acpi=off is the only solution. 2.6.36 was
>> fine)
>> 
>> I'll post more bugs in here as I've found them.
>> 
>> Thanks,
>
>Looks like these are all Intel machines. Do they use intel_idle for the
>CPU powersaving features?
>(cat /sys/devices/system/cpu/cpuidle/current_driver)
>
>If yes - does booting with intel_idle.max_cstate=0 or
>intel_idle.max_cstate=3 boot parameter help?
>
>It could be related to https://bugzilla.kernel.org/show_bug.cgi?id=21952
>somehow, which seems to be an 2.6.35 regression.

This hang on shutdown, (I have an asus big board) can it also be caused by 
not having /var as a dir on /? 

After having been burnt by / going read-only, depriving me of the failure 
log, I have always put /var on its own partition, which is unmounted early 
and then halt can't get a lockfile, so it hangs after turning off the 
swaps. I have to hit the hardware reset button from there to complete the 
reboot.

Twould be nice if there was a fix for that. ;)

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Downgrade your system for only 89 dollars! Install Windows!

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-23 15:00 ` Richard Schütz
  2011-01-23 15:11   ` Gene Heskett
@ 2011-01-23 16:49   ` Ozan Çağlayan
  1 sibling, 0 replies; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-23 16:49 UTC (permalink / raw)
  To: Richard Schütz; +Cc: linux-acpi, linux-kernel, platform-driver-x86, rjw

On 23.01.2011 17:00, Richard Schütz wrote:

>
> Looks like these are all Intel machines. Do they use intel_idle for the
> CPU powersaving features?
> (cat /sys/devices/system/cpu/cpuidle/current_driver)

Well at least on F50SV and N61JQ they use acpi_idle (this is what dmesg 
output says).

I'll open a bug for N61JQ as I've got detailed information about it.


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-23 14:28 Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops) Ozan Çağlayan
  2011-01-23 15:00 ` Richard Schütz
@ 2011-01-23 16:56 ` Ozan Çağlayan
  2011-01-23 20:24 ` Ozan Çağlayan
  2 siblings, 0 replies; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-23 16:56 UTC (permalink / raw)
  To: linux-acpi, linux-kernel, platform-driver-x86, rjw

On 23.01.2011 16:28, Ozan Çağlayan wrote:

> "Asus N61JQ hangs at shutdown unless lapic is passed"
> (Not reported upstream yet, I've only downstream bug report which is
> Turkish)
> http://bugs.pardus.org.tr/show_bug.cgi?id=15969

Asus N61JQ is reported upstream:
https://bugzilla.kernel.org/show_bug.cgi?id=27412


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-23 14:28 Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops) Ozan Çağlayan
  2011-01-23 15:00 ` Richard Schütz
  2011-01-23 16:56 ` Ozan Çağlayan
@ 2011-01-23 20:24 ` Ozan Çağlayan
  2011-01-24  9:00   ` Ozan Çağlayan
  2011-01-24  9:04   ` Lionel Debroux
  2 siblings, 2 replies; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-23 20:24 UTC (permalink / raw)
  To: linux-acpi, linux-kernel, platform-driver-x86, rjw, colin.king

On 23.01.2011 16:28, Ozan Çağlayan wrote:
> Hi,
>
> I'm getting a lot of bug reports about hanging boot/shutdowns on these
> days.
>
> Most of the affected hardware are ASUS laptops. The problem is that I
> don't have access to any of those problematic laptops and the users are
> not able at all to debug/bisect what is going on. However, I have
> collected dmesgs of good/bad boots, acpidump, etc.
>
> Here are the current status:
>
> "Asus F50SV does not boot unless lapic is passed"
> https://bugzilla.kernel.org/show_bug.cgi?id=26502
>
> "Regression between 2.6.35-020635-rc1 and 2.6.35-020635 breaks acpi
> support on Asus X71 laptop"
> https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/689796
>
> "Asus N61JQ hangs at shutdown unless lapic is passed"
> (Not reported upstream yet, I've only downstream bug report which is
> Turkish)
> http://bugs.pardus.org.tr/show_bug.cgi?id=15969
>
> "Asus X61S does not boot unless acpi=off is given"
> (Not reported upstream yet, I've only downstream bug report which is
> Turkish)
> http://bugs.pardus.org.tr/show_bug.cgi?id=16322
> (I've told the reporter to try with nolapic, it will probably fix the
> issue but until confirmed acpi=off is the only solution. 2.6.36 was fine)
>
> I'll post more bugs in here as I've found them.

(CC'ing: Colin King from Canonical)

Another one for Asus N90Sc which was booting fine with 10.04
but fails to boot with 10.10:
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/653626

Seen that the issue mostly happens on Asus boxes, it's possible
that their firmwares are buggy but they were booting/shutting down
correctly until a recent change in kernel.


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-23 20:24 ` Ozan Çağlayan
@ 2011-01-24  9:00   ` Ozan Çağlayan
  2011-01-24  9:04   ` Lionel Debroux
  1 sibling, 0 replies; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-24  9:00 UTC (permalink / raw)
  To: linux-acpi; +Cc: linux-kernel, platform-driver-x86, rjw, colin.king

Pazar 23 Ocak 2011 günü (saat 22:24:48) Ozan Çağlayan şunları yazmıştı:
> On 23.01.2011 16:28, Ozan Çağlayan wrote:
> > Hi,

I've tested on some Asus EEE netbooks but they don't seem to be affected.
The processors of the problematic notebooks are as follows:

Asus N61JQ has
 Intel(R) Core(TM) i7 CPU       Q 740  @ 1.73GHz stepping 05

Asus N90Sc has
 Intel(R) Core(TM)2 CPU         P8700  @ 2.53GHz stepping 0a

Asus X71 has
 Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz stepping 0d

Asus X61S has
 Intel(R) Core(TM)2 CPU         P8700  @ 2.53GHz stepping 0a

---
Ozan Çağlayan
TUBITAK/UEKAE - Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-23 20:24 ` Ozan Çağlayan
  2011-01-24  9:00   ` Ozan Çağlayan
@ 2011-01-24  9:04   ` Lionel Debroux
  2011-01-24  9:21     ` Ozan Çağlayan
  1 sibling, 1 reply; 47+ messages in thread
From: Lionel Debroux @ 2011-01-24  9:04 UTC (permalink / raw)
  To: linux-acpi, linux-kernel, platform-driver-x86, rjw, colin.king,
	Ozan Çağlayan



--- En date de : Dim 23.1.11, Ozan Çağlayan <ozan@pardus.org.tr>
a écrit :

> De: Ozan Çağlayan <ozan@pardus.org.tr>
> Objet: Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
> À: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org, rjw@sisk.pl, colin.king@canonical.com
> Date: Dimanche 23 janvier 2011, 21h24
> On 23.01.2011 16:28, Ozan Çağlayan
> wrote:
> > Hi,
> >
> > I'm getting a lot of bug reports about hanging
> boot/shutdowns on these
> > days.
> >
> > Most of the affected hardware are ASUS laptops. The
> problem is that I
> > don't have access to any of those problematic laptops
> and the users are
> > not able at all to debug/bisect what is going on.
> However, I have
> > collected dmesgs of good/bad boots, acpidump, etc.
> >
> > Here are the current status:
> >
> > "Asus F50SV does not boot unless lapic is passed"
> > https://bugzilla.kernel.org/show_bug.cgi?id=26502
> >
> > "Regression between 2.6.35-020635-rc1 and
> 2.6.35-020635 breaks acpi
> > support on Asus X71 laptop"
> > https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/689796
> >
> > "Asus N61JQ hangs at shutdown unless lapic is passed"
> > (Not reported upstream yet, I've only downstream bug
> report which is
> > Turkish)
> > http://bugs.pardus.org.tr/show_bug.cgi?id=15969
> >
> > "Asus X61S does not boot unless acpi=off is given"
> > (Not reported upstream yet, I've only downstream bug
> report which is
> > Turkish)
> > http://bugs.pardus.org.tr/show_bug.cgi?id=16322
> > (I've told the reporter to try with nolapic, it will
> probably fix the
> > issue but until confirmed acpi=off is the only
> solution. 2.6.36 was fine)
> >
> > I'll post more bugs in here as I've found them.
> 
> (CC'ing: Colin King from Canonical)
> 
> Another one for Asus N90Sc which was booting fine with
> 10.04
> but fails to boot with 10.10:
>   https://bugs.launchpad.net/ubuntu/+source/linux/+bug/653626
> 
> Seen that the issue mostly happens on Asus boxes, it's
> possible
> that their firmwares are buggy but they were
> booting/shutting down
> correctly until a recent change in kernel.
My ASUS F3Jv-AS022P (Core 2 Duo T7200, 2 GB RAM, BIOS version
207) has trouble (read: it reboots within one second of the
vmlinuz being loaded) with recent kernels as well.

While I haven't performed a full bisection yet (which is why 
I didn't try reporting the problem until I saw this thread),
I have narrowed down the problem by compiling several tagged
versions:
* 2.6.35 series: .4 and .6 boot successfully, .8 and .10 fail;
* 2.6.36 series: -rc2 boots successfully, .1 fails;
* 2.6.37 series: -rc4 fails.


I can perform further testing if needed.


Regards,
Lionel.


      

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-24  9:04   ` Lionel Debroux
@ 2011-01-24  9:21     ` Ozan Çağlayan
  2011-01-24  9:47       ` Lionel Debroux
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-24  9:21 UTC (permalink / raw)
  To: Lionel Debroux
  Cc: linux-acpi, linux-kernel, platform-driver-x86, rjw, colin.king

Pazartesi 24 Ocak 2011 günü (saat 11:04:35) Lionel Debroux şunları yazmıştı:
> 
> --- En date de : Dim 23.1.11, Ozan Çağlayan <ozan@pardus.org.tr>
> a écrit :
> 
> > De: Ozan Çağlayan <ozan@pardus.org.tr>
> > Objet: Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
> > À: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org, rjw@sisk.pl, colin.king@canonical.com
> > Date: Dimanche 23 janvier 2011, 21h24
> > On 23.01.2011 16:28, Ozan Çağlayan
> > wrote:
> > > Hi,
> > >
> > > I'm getting a lot of bug reports about hanging
> > boot/shutdowns on these
> > > days.
> > >
> > > Most of the affected hardware are ASUS laptops. The
> > problem is that I
> > > don't have access to any of those problematic laptops
> > and the users are
> > > not able at all to debug/bisect what is going on.
> > However, I have
> > > collected dmesgs of good/bad boots, acpidump, etc.
> > >
> > > Here are the current status:
> > >
> > > "Asus F50SV does not boot unless lapic is passed"
> > > https://bugzilla.kernel.org/show_bug.cgi?id=26502
> > >
> > > "Regression between 2.6.35-020635-rc1 and
> > 2.6.35-020635 breaks acpi
> > > support on Asus X71 laptop"
> > > https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/689796
> > >
> > > "Asus N61JQ hangs at shutdown unless lapic is passed"
> > > (Not reported upstream yet, I've only downstream bug
> > report which is
> > > Turkish)
> > > http://bugs.pardus.org.tr/show_bug.cgi?id=15969
> > >
> > > "Asus X61S does not boot unless acpi=off is given"
> > > (Not reported upstream yet, I've only downstream bug
> > report which is
> > > Turkish)
> > > http://bugs.pardus.org.tr/show_bug.cgi?id=16322
> > > (I've told the reporter to try with nolapic, it will
> > probably fix the
> > > issue but until confirmed acpi=off is the only
> > solution. 2.6.36 was fine)
> > >
> > > I'll post more bugs in here as I've found them.
> > 
> > (CC'ing: Colin King from Canonical)
> > 
> > Another one for Asus N90Sc which was booting fine with
> > 10.04
> > but fails to boot with 10.10:
> >   https://bugs.launchpad.net/ubuntu/+source/linux/+bug/653626
> > 
> > Seen that the issue mostly happens on Asus boxes, it's
> > possible
> > that their firmwares are buggy but they were
> > booting/shutting down
> > correctly until a recent change in kernel.
> My ASUS F3Jv-AS022P (Core 2 Duo T7200, 2 GB RAM, BIOS version
> 207) has trouble (read: it reboots within one second of the
> vmlinuz being loaded) with recent kernels as well.
> 
> While I haven't performed a full bisection yet (which is why 
> I didn't try reporting the problem until I saw this thread),
> I have narrowed down the problem by compiling several tagged
> versions:
> * 2.6.35 series: .4 and .6 boot successfully, .8 and .10 fail;
> * 2.6.36 series: -rc2 boots successfully, .1 fails;
> * 2.6.37 series: -rc4 fails.

So it's probably a commit to the mainline tree which was picked by 2.6.35
maintainer to the stable tree (probably it was CC'ed) cause this.

Does passing nolapic or acpi=off cures the issue? Maybe rebooting immediately while booting
is a sign of another problem, I don't know.

---
Ozan Çağlayan
TUBITAK/UEKAE - Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-24  9:21     ` Ozan Çağlayan
@ 2011-01-24  9:47       ` Lionel Debroux
  2011-01-24 20:14         ` Lionel Debroux
  0 siblings, 1 reply; 47+ messages in thread
From: Lionel Debroux @ 2011-01-24  9:47 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: linux-acpi, linux-kernel, platform-driver-x86, rjw, colin.king



--- En date de : Lun 24.1.11, Ozan Çağlayan <ozan@pardus.org.tr> a écrit :

> De: Ozan Çağlayan <ozan@pardus.org.tr>
> Objet: Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
> À: "Lionel Debroux" <lionel_debroux@yahoo.fr>
> Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org, rjw@sisk.pl, colin.king@canonical.com
> Date: Lundi 24 janvier 2011, 10h21
> Pazartesi 24 Ocak 2011 günü (saat
> 11:04:35) Lionel Debroux şunları yazmıştı:
> > 
> > --- En date de : Dim 23.1.11, Ozan Çağlayan <ozan@pardus.org.tr>
> > a écrit :
> > 
> > > De: Ozan Çağlayan <ozan@pardus.org.tr>
> > > Objet: Re: Common boot/shutdown issues with the
> latest 2.6.37 (Mostly Asus laptops)
> > > À: linux-acpi@vger.kernel.org,
> linux-kernel@vger.kernel.org,
> platform-driver-x86@vger.kernel.org,
> rjw@sisk.pl, colin.king@canonical.com
> > > Date: Dimanche 23 janvier 2011, 21h24
> > > On 23.01.2011 16:28, Ozan Çağlayan
> > > wrote:
> > > > Hi,
> > > >
> > > > I'm getting a lot of bug reports about
> hanging
> > > boot/shutdowns on these
> > > > days.
> > > >
> > > > Most of the affected hardware are ASUS
> laptops. The
> > > problem is that I
> > > > don't have access to any of those
> problematic laptops
> > > and the users are
> > > > not able at all to debug/bisect what is
> going on.
> > > However, I have
> > > > collected dmesgs of good/bad boots,
> acpidump, etc.
> > > >
> > > > Here are the current status:
> > > >
> > > > "Asus F50SV does not boot unless lapic is
> passed"
> > > > https://bugzilla.kernel.org/show_bug.cgi?id=26502
> > > >
> > > > "Regression between 2.6.35-020635-rc1 and
> > > 2.6.35-020635 breaks acpi
> > > > support on Asus X71 laptop"
> > > > https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/689796
> > > >
> > > > "Asus N61JQ hangs at shutdown unless lapic
> is passed"
> > > > (Not reported upstream yet, I've only
> downstream bug
> > > report which is
> > > > Turkish)
> > > > http://bugs.pardus.org.tr/show_bug.cgi?id=15969
> > > >
> > > > "Asus X61S does not boot unless acpi=off is
> given"
> > > > (Not reported upstream yet, I've only
> downstream bug
> > > report which is
> > > > Turkish)
> > > > http://bugs.pardus.org.tr/show_bug.cgi?id=16322
> > > > (I've told the reporter to try with nolapic,
> it will
> > > probably fix the
> > > > issue but until confirmed acpi=off is the
> only
> > > solution. 2.6.36 was fine)
> > > >
> > > > I'll post more bugs in here as I've found
> them.
> > > 
> > > (CC'ing: Colin King from Canonical)
> > > 
> > > Another one for Asus N90Sc which was booting fine
> with
> > > 10.04
> > > but fails to boot with 10.10:
> > >   https://bugs.launchpad.net/ubuntu/+source/linux/+bug/653626
> > > 
> > > Seen that the issue mostly happens on Asus boxes,
> it's
> > > possible
> > > that their firmwares are buggy but they were
> > > booting/shutting down
> > > correctly until a recent change in kernel.
> > My ASUS F3Jv-AS022P (Core 2 Duo T7200, 2 GB RAM, BIOS
> version
> > 207) has trouble (read: it reboots within one second
> of the
> > vmlinuz being loaded) with recent kernels as well.
> > 
> > While I haven't performed a full bisection yet (which
> is why 
> > I didn't try reporting the problem until I saw this
> thread),
> > I have narrowed down the problem by compiling several
> tagged
> > versions:
> > * 2.6.35 series: .4 and .6 boot successfully, .8 and
> .10 fail;
> > * 2.6.36 series: -rc2 boots successfully, .1 fails;
> > * 2.6.37 series: -rc4 fails.
> 
> So it's probably a commit to the mainline tree which was
> picked by 2.6.35
> maintainer to the stable tree (probably it was CC'ed) cause
> this.
> 
> Does passing nolapic or acpi=off cures the issue?
IIRC, I tested at least one of these, without improvement.
I'll test again tonight, when I can physically access the
computer.

> Maybe rebooting immediately while booting
> is a sign of another problem, I don't know.
>
> ---
> Ozan Çağlayan
> TUBITAK/UEKAE - Pardus Linux
> http://www.pardus.org.tr/eng


Lionel.


      

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-24  9:47       ` Lionel Debroux
@ 2011-01-24 20:14         ` Lionel Debroux
  2011-01-25  2:56           ` Len Brown
  2011-01-25  6:22           ` Ozan Çağlayan
  0 siblings, 2 replies; 47+ messages in thread
From: Lionel Debroux @ 2011-01-24 20:14 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: linux-acpi, linux-kernel, platform-driver-x86, rjw, colin.king

[-- Attachment #1: Type: text/plain, Size: 4169 bytes --]

On 24.01.2011 10:47, Lionel Debroux wrote:
> 
> 
> --- En date de : Lun 24.1.11, Ozan Çağlayan <ozan@pardus.org.tr> a écrit :
> 
>> De: Ozan Çağlayan <ozan@pardus.org.tr>
>> Objet: Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
>> À: "Lionel Debroux" <lionel_debroux@yahoo.fr>
>> Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org, rjw@sisk.pl, colin.king@canonical.com
>> Date: Lundi 24 janvier 2011, 10h21
>> Pazartesi 24 Ocak 2011 günü (saat
>> 11:04:35) Lionel Debroux şunları yazmıştı:
>>>
>>> --- En date de : Dim 23.1.11, Ozan Çağlayan <ozan@pardus.org.tr>
>>> a écrit :
>>>
>>>> De: Ozan Çağlayan <ozan@pardus.org.tr>
>>>> Objet: Re: Common boot/shutdown issues with the
>> latest 2.6.37 (Mostly Asus laptops)
>>>> À: linux-acpi@vger.kernel.org,
>> linux-kernel@vger.kernel.org,
>> platform-driver-x86@vger.kernel.org,
>> rjw@sisk.pl, colin.king@canonical.com
>>>> Date: Dimanche 23 janvier 2011, 21h24
>>>> On 23.01.2011 16:28, Ozan Çağlayan
>>>> wrote:
>>>>> Hi,
>>>>>
>>>>> I'm getting a lot of bug reports about hanging
>>>>> boot/shutdowns on these days.
>>>>>
>>>>> Most of the affected hardware are ASUS laptops. The
>>>>> problem is that I don't have access to any of those
>>>>> problematic laptops and the users are
>>>>> not able at all to debug/bisect what is going on.
>>>>> However, I have collected dmesgs of good/bad boots,
>>>>> acpidump, etc.
>>>>>
>>>>> Here are the current status:
>>>>>
>>>>> "Asus F50SV does not boot unless lapic is passed"
>>>>> https://bugzilla.kernel.org/show_bug.cgi?id=26502
>>>>>
>>>>> "Regression between 2.6.35-020635-rc1 and 2.6.35-020635 breaks
>>>>> acpi support on Asus X71 laptop"
>>>>> https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/689796
>>>>>
>>>>> "Asus N61JQ hangs at shutdown unless lapic is passed"
>>>>> (Not reported upstream yet, I've only downstream bug
>>>>> report which is Turkish)
>>>>> http://bugs.pardus.org.tr/show_bug.cgi?id=15969
>>>>>
>>>>> "Asus X61S does not boot unless acpi=off is given"
>>>>> (Not reported upstream yet, I've only downstream bug
>>>>> report which is Turkish)
>>>>> http://bugs.pardus.org.tr/show_bug.cgi?id=16322
>>>>> (I've told the reporter to try with nolapic, it will
>>>>> probably fix the issue but until confirmed acpi=off is the
>>>>> only solution. 2.6.36 was fine)
>>>>>
>>>>> I'll post more bugs in here as I've found them.
>>>>
>>>> (CC'ing: Colin King from Canonical)
>>>>
>>>> Another one for Asus N90Sc which was booting fine with
>>>> 10.04
>>>> but fails to boot with 10.10:
>>>>    https://bugs.launchpad.net/ubuntu/+source/linux/+bug/653626
>>>>
>>>> Seen that the issue mostly happens on Asus boxes, it's
>>>> possible that their firmwares are buggy but they were
>>>> booting/shutting down correctly until a recent change in kernel.
>>> My ASUS F3Jv-AS022P (Core 2 Duo T7200, 2 GB RAM, BIOS version
>>> 207) has trouble (read: it reboots within one second of the
>>> vmlinuz being loaded) with recent kernels as well.
>>>
>>> While I haven't performed a full bisection yet (which is why 
>>> I didn't try reporting the problem until I saw this thread),
>>> I have narrowed down the problem by compiling several tagged
>>> versions:
>>> * 2.6.35 series: .4 and .6 boot successfully, .8 and .10 fail;
>>> * 2.6.36 series: -rc2 boots successfully, .1 fails;
>>> * 2.6.37 series: -rc4 fails.
>>
>> So it's probably a commit to the mainline tree which was picked
>> by 2.6.35 maintainer to the stable tree (probably it was CC'ed)
>> cause this.
>>
>> Does passing nolapic or acpi=off cures the issue?
> IIRC, I tested at least one of these, without improvement.
> I'll test again tonight, when I can physically access the
> computer.
None of nolapic, acpi=off, nolapic acpi=off enables 2.6.35.8 to boot
on my ASUS F3Jv-AS022P.
The kernel line is
kernel /boot/vmlinuz root=/dev/sda9 nomce vga=791 nomodeset
I've attached the 2.6.35.6 config.


>> Maybe rebooting immediately while booting
>> is a sign of another problem, I don't know.
>>
>> ---
>> Ozan Çağlayan
>> TUBITAK/UEKAE - Pardus Linux
>> http://www.pardus.org.tr/eng


Lionel.

[-- Attachment #2: config-2.6.35.6-candela --]
[-- Type: text/plain, Size: 93403 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35.6-candela
# Mon Sep 27 18:41:58 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_NVS=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
# CONFIG_NETFILTER_XT_TARGET_CT is not set
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m

#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_NET_SCTPPROBE is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_RPS=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_L2CAP_EXT_FEATURES is not set
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_ATH3K is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not set
CONFIG_HP_ILO=m
# CONFIG_ISL29003 is not set
CONFIG_SENSORS_TSL2550=m
CONFIG_DS1682=m
# CONFIG_TI_DAC7512 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not set
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
CONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_RZ1000=y

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=y
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
# CONFIG_MACVTAP is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
# CONFIG_IGB_DCA is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=m
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
# CONFIG_AT76C50X_USB is not set
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_RTL8187_LEDS=y
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
# CONFIG_B43_SDIO is not set
CONFIG_B43_PIO=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not set
# CONFIG_HOSTAP_CS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_IWLAGN is not set
CONFIG_IWL3945=m
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
CONFIG_RT61PCI=m
CONFIG_RT2800PCI_PCI=y
# CONFIG_RT2800PCI is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2800USB is not set
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
# CONFIG_RT2X00_DEBUG is not set
# CONFIG_WL12XX is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=m
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_WINBOND_CIR is not set
# CONFIG_INPUT_PCF8574 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_N_GSM is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
CONFIG_NOZOMI=m

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=m

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ASC7621 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
# CONFIG_SENSORS_EMC1403 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_SENSORS_APPLESMC=m

#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
# CONFIG_SBC_FITPC2_WATCHDOG is not set
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
# CONFIG_ITCO_WDT is not set
CONFIG_IT8712F_WDT=m
# CONFIG_IT87_WDT is not set
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_AB8500_CORE is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_IR_CORE=y
CONFIG_VIDEO_IR=y
CONFIG_RC_MAP=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
# CONFIG_IR_IMON is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMISE=y
# CONFIG_MEDIA_TUNER_SIMPLE is not set
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not set
# CONFIG_MEDIA_TUNER_TDA9887 is not set
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_MC44S803 is not set
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
CONFIG_USB_STKWEBCAM=m
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_KAHLUA is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
# CONFIG_HID_CANDO is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EGALAX is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_ROCCAT_KONE is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WACOM_POWER_SUPPLY is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=m
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD64 is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
# CONFIG_RTC_DRV_DS1390 is not set
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=y
# CONFIG_TIMB_DMA is not set
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_DELL_WMI is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
CONFIG_SONY_LAPTOP=m
# CONFIG_SONYPI_COMPAT is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_EEEPC_WMI is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=m
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_GENERIC_ACL=y

#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTRS is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_FSCACHE is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
# CONFIG_SYSPROF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_VHOST_NET is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-24 20:14         ` Lionel Debroux
@ 2011-01-25  2:56           ` Len Brown
  2011-01-26  7:41             ` Lionel Debroux
  2011-01-25  6:22           ` Ozan Çağlayan
  1 sibling, 1 reply; 47+ messages in thread
From: Len Brown @ 2011-01-25  2:56 UTC (permalink / raw)
  To: Lionel Debroux
  Cc: Ozan Çağlayan, linux-acpi, linux-kernel,
	platform-driver-x86, rjw, colin.king

> >>> * 2.6.35 series: .4 and .6 boot successfully, .8 and .10 fail;
> >>> * 2.6.36 series: -rc2 boots successfully, .1 fails;
> >>> * 2.6.37 series: -rc4 fails.
> >>
> >> So it's probably a commit to the mainline tree which was picked
> >> by 2.6.35 maintainer to the stable tree (probably it was CC'ed)
> >> cause this.
> >>
> >> Does passing nolapic or acpi=off cures the issue?
> > IIRC, I tested at least one of these, without improvement.
> > I'll test again tonight, when I can physically access the
> > computer.
> None of nolapic, acpi=off, nolapic acpi=off enables 2.6.35.8 to boot
> on my ASUS F3Jv-AS022P.
> The kernel line is
> kernel /boot/vmlinuz root=/dev/sda9 nomce vga=791 nomodeset
> I've attached the 2.6.35.6 config.

looks like you've bisected as far as:
2.6.35.6 good
2.6.35.8 bad

can you try 2.6.35.7 and continue on to find which specific patch
in .stable broke your machine?

thanks,
Len Brown, Intel Open Source Technology Center


^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-25  2:56           ` Len Brown
@ 2011-01-26  7:41             ` Lionel Debroux
  2011-01-27  7:59               ` Lionel Debroux
  0 siblings, 1 reply; 47+ messages in thread
From: Lionel Debroux @ 2011-01-26  7:41 UTC (permalink / raw)
  To: Len Brown
  Cc: Ozan Çağlayan, linux-acpi, linux-kernel,
	platform-driver-x86, rjw, colin.king

>>>>> * 2.6.35 series: .4 and .6 boot successfully, .8 and .10 fail;
>>>>> * 2.6.36 series: -rc2 boots successfully, .1 fails;
>>>>> * 2.6.37 series: -rc4 fails.
>>>>
>>>> So it's probably a commit to the mainline tree which was picked
>>>> by 2.6.35 maintainer to the stable tree (probably it was CC'ed)
>>>> cause this.
>>>>
>>>> Does passing nolapic or acpi=off cures the issue?
>>> IIRC, I tested at least one of these, without improvement.
>>> I'll test again tonight, when I can physically access the
>>> computer.
>> None of nolapic, acpi=off, nolapic acpi=off enables 2.6.35.8 to
>> boot on my ASUS F3Jv-AS022P.
>> The kernel line is
>> kernel /boot/vmlinuz root=/dev/sda9 nomce vga=791 nomodeset
>> I've attached the 2.6.35.6 config.
> 
> looks like you've bisected as far as:
> 2.6.35.6 good
> 2.6.35.8 bad
> 
> can you try 2.6.35.7 and continue on to find which specific patch
> in .stable broke your machine?
The bisection between 2.6.35.6 and 2.6.35.8 is in progress, two steps
left and no good kernel found yet (?!)
Due to not having physical access to the computer during work time, I
won't be able to finish until tonight.


Regards,
Lionel.

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-26  7:41             ` Lionel Debroux
@ 2011-01-27  7:59               ` Lionel Debroux
  0 siblings, 0 replies; 47+ messages in thread
From: Lionel Debroux @ 2011-01-27  7:59 UTC (permalink / raw)
  To: Len Brown
  Cc: Ozan Çağlayan, linux-acpi, linux-kernel,
	platform-driver-x86, rjw, colin.king

On 26.01.2011 08:41, Lionel Debroux wrote:
>>>>>> * 2.6.35 series: .4 and .6 boot successfully, .8 and .10 fail;
>>>>>> * 2.6.36 series: -rc2 boots successfully, .1 fails;
>>>>>> * 2.6.37 series: -rc4 fails.
>>>>>
>>>>> So it's probably a commit to the mainline tree which was picked
>>>>> by 2.6.35 maintainer to the stable tree (probably it was CC'ed)
>>>>> cause this.
>>>>>
>>>>> Does passing nolapic or acpi=off cures the issue?
>>>> IIRC, I tested at least one of these, without improvement.
>>>> I'll test again tonight, when I can physically access the
>>>> computer.
>>> None of nolapic, acpi=off, nolapic acpi=off enables 2.6.35.8 to
>>> boot on my ASUS F3Jv-AS022P.
>>> The kernel line is
>>> kernel /boot/vmlinuz root=/dev/sda9 nomce vga=791 nomodeset
>>> I've attached the 2.6.35.6 config.
>>
>> looks like you've bisected as far as:
>> 2.6.35.6 good
>> 2.6.35.8 bad
>>
>> can you try 2.6.35.7 and continue on to find which specific patch
>> in .stable broke your machine?
> The bisection between 2.6.35.6 and 2.6.35.8 is in progress, two steps
> left and no good kernel found yet (?!)
> Due to not having physical access to the computer during work time, I
> won't be able to finish until tonight.
Bisection log of the
git://git.kernel.org/pub/scm/linux/kernel/git/longterm/linux-2.6.35.y.git repository:

$ git bisect log
git bisect start
# good: [7273c1c64b2d4cb0ddfa7682ec7ab71dfe906398] Linux 2.6.35.6
git bisect good 7273c1c64b2d4cb0ddfa7682ec7ab71dfe906398
# bad: [f16e6e4df8ec41328d7e0841bc17f2a587eb2c67] Linux 2.6.35.8
git bisect bad f16e6e4df8ec41328d7e0841bc17f2a587eb2c67
# bad: [cd1bbdfed8ff5047d96ed27a3ee7b881069daf03] reiserfs: fix
dependency inversion between inode and reiserfs mutexes
git bisect bad cd1bbdfed8ff5047d96ed27a3ee7b881069daf03
# bad: [74352c5c9e2e5c914254d2588876c0c13333c6f5] V4L/DVB: gspca -
sn9c20x: Bad transfer size of Bayer images
git bisect bad 74352c5c9e2e5c914254d2588876c0c13333c6f5
# bad: [dc7237c6b7b529c5da2776cbb8b68cc74d1555c3] HID: hidraw, fix a
NULL pointer dereference in hidraw_ioctl
git bisect bad dc7237c6b7b529c5da2776cbb8b68cc74d1555c3
# bad: [e5d843fbf633dc65353bc08ee28f6b08ce651a4d] ALSA: hda - Add Dell
Latitude E6400 model quirk
git bisect bad e5d843fbf633dc65353bc08ee28f6b08ce651a4d
# bad: [9f09ac68e7af2001a24242cbe0f6e40e89dd6c62] x86, cpu: After
uncapping CPUID, re-run CPU feature detection
git bisect bad 9f09ac68e7af2001a24242cbe0f6e40e89dd6c62

--- up to this point, all kernels reboot ~1s after the messsage noting
vmlinuz being loaded disappears

# bad: [ea8a52f9f4bcc3420c38ae07f8378a2f18443970] Linux 2.6.35.7
git bisect bad ea8a52f9f4bcc3420c38ae07f8378a2f18443970

--- at this point, one commit before
9f09ac68e7af2001a24242cbe0f6e40e89dd6c62, the behaviour changes: the
computer does not reboot anymore, but it doesn't boot either. It hangs
with a backlit but black LCD. I let it alone for several minutes, it
didn't boot.
I double-checked by swapping twice between this kernel and the previous
one (9f09ac68e7af2001a24242cbe0f6e40e89dd6c62), falling back to the
2.6.35.6 compiled in late September 2010 to get the computer to boot and
swap kernels.

# bad: [b0dd220aefe1ab80823cf13e9588c64fec151488] Xen: fix typo in
previous patch
git bisect bad b0dd220aefe1ab80823cf13e9588c64fec151488

--- at this point, the kernel reboots again as most of the kernels in
this bisection did. The problem is,
ea8a52f9f4bcc3420c38ae07f8378a2f18443970 is a tag commit...

And obviously, bisection ends in:
b0dd220aefe1ab80823cf13e9588c64fec151488 is the first bad commit
commit b0dd220aefe1ab80823cf13e9588c64fec151488
Author: James Dingwall <james.dingwall@amdocs.com>
Date:   Mon Sep 27 09:37:17 2010 +0100

    Xen: fix typo in previous patch

    Correctly name the irq_chip structure to fix an immediate failure
when booting
    as a xen pv_ops guest with a NULL pointer exception. The missing 'x' was
    introduced in commit [fb412a178502dc498430723b082a932f797e4763]
applied to
    2.6.3[25]-stable trees.  The commit to mainline was
    [aaca49642b92c8a57d3ca5029a5a94019c7af69f] which did not have the
problem.

    Signed-off-by: James Dingwall <james@dingwall.me.uk>
    Reported-by: Pawel Zuzelski <pawelz@pld-linux.org>
    Tested-by: Pawel Zuzelski <pawelz@pld-linux.org>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

:040000 040000 81981a3f0c89adbdf28306b2dc23c631c815935f
ca642d7b5a94ad56c6179ba4d90e2281076672b9 M      drivers



But none of that makes any sense for multiple reasons...
I guess it's time for me to:
* try recompiling older kernel versions that I previously successfully
compiled to a kernel in proper booting state. But the package
installation history in Synaptic between September 27th 2010 (last
working kernel so far) and November 23th 2010 (first bad kernel) doesn't
show any upgrade of binutils or gcc...
* try out other kernel series: 2.6.32, 2.6.34, 2.6.37 and the 2.6.38-rc
series.


Sorry for the noise...


Regards,
Lionel.

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-24 20:14         ` Lionel Debroux
  2011-01-25  2:56           ` Len Brown
@ 2011-01-25  6:22           ` Ozan Çağlayan
  2011-01-25 19:38             ` Rafael J. Wysocki
  1 sibling, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-25  6:22 UTC (permalink / raw)
  To: Lionel Debroux
  Cc: linux-acpi, linux-kernel, platform-driver-x86, rjw, colin.king

Pazartesi 24 Ocak 2011 günü (saat 22:14:28) Lionel Debroux şunları yazmıştı:
> On 24.01.2011 10:47, Lionel Debroux wrote:

> None of nolapic, acpi=off, nolapic acpi=off enables 2.6.35.8 to boot
> on my ASUS F3Jv-AS022P.
> The kernel line is
> kernel /boot/vmlinuz root=/dev/sda9 nomce vga=791 nomodeset
> I've attached the 2.6.35.6 config.

Yes one of my reporters also tells that on 2.6.35 the problem can't be cured with nolapic
but on 2.6.37 it helps.



---
Ozan Çağlayan
TUBITAK/UEKAE - Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-25  6:22           ` Ozan Çağlayan
@ 2011-01-25 19:38             ` Rafael J. Wysocki
  2011-01-25 19:45               ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-25 19:38 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On Tuesday, January 25, 2011, Ozan Çağlayan wrote:
> Pazartesi 24 Ocak 2011 günü (saat 22:14:28) Lionel Debroux şunları yazmıştı:
> > On 24.01.2011 10:47, Lionel Debroux wrote:
> 
> > None of nolapic, acpi=off, nolapic acpi=off enables 2.6.35.8 to boot
> > on my ASUS F3Jv-AS022P.
> > The kernel line is
> > kernel /boot/vmlinuz root=/dev/sda9 nomce vga=791 nomodeset
> > I've attached the 2.6.35.6 config.
> 
> Yes one of my reporters also tells that on 2.6.35 the problem can't be cured with nolapic
> but on 2.6.37 it helps.

Does
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ec30f343d61391ab23705e50a525da1d55395780
generally help?

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-25 19:38             ` Rafael J. Wysocki
@ 2011-01-25 19:45               ` Ozan Çağlayan
  2011-01-25 19:54                 ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-25 19:45 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On 25.01.2011 21:38, Rafael J. Wysocki wrote:

> Does
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ec30f343d61391ab23705e50a525da1d55395780
> generally help?

Well I can let them try a patched kernel but will a kernel showing 
acpi_idle as the cpuidle driver in dmesg will be affected by this patch?
I can't see any sign on reporters' dmesg that intel_idle is active.



-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-25 19:45               ` Ozan Çağlayan
@ 2011-01-25 19:54                 ` Rafael J. Wysocki
  2011-01-25 20:00                   ` Ozan Çağlayan
  2011-01-29 17:49                   ` Ozan Çağlayan
  0 siblings, 2 replies; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-25 19:54 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On Tuesday, January 25, 2011, Ozan Çağlayan wrote:
> On 25.01.2011 21:38, Rafael J. Wysocki wrote:
> 
> > Does
> > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=ec30f343d61391ab23705e50a525da1d55395780
> > generally help?
> 
> Well I can let them try a patched kernel but will a kernel showing 
> acpi_idle as the cpuidle driver in dmesg will be affected by this patch?
> I can't see any sign on reporters' dmesg that intel_idle is active.

If intel_idle is not active, then the patch will not help.

However, it would be good to check if the affected systems work with
intel_idle + the above patch instead of acpi_idle.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-25 19:54                 ` Rafael J. Wysocki
@ 2011-01-25 20:00                   ` Ozan Çağlayan
  2011-01-29 17:49                   ` Ozan Çağlayan
  1 sibling, 0 replies; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-25 20:00 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king


> However, it would be good to check if the affected systems work with
> intel_idle + the above patch instead of acpi_idle.

My bad. I thought that I enabled intel_idle but it was not
driving those processors but it seems that I've not enabled it on those 
kernels.

Okay, ASAP I'll report back what's going on with intel_idle + the
patch that you gave.


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-25 19:54                 ` Rafael J. Wysocki
  2011-01-25 20:00                   ` Ozan Çağlayan
@ 2011-01-29 17:49                   ` Ozan Çağlayan
  2011-01-30 20:30                     ` Ozan Çağlayan
  1 sibling, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-29 17:49 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On 25.01.2011 21:54, Rafael J. Wysocki wrote:

>
> If intel_idle is not active, then the patch will not help.
>
> However, it would be good to check if the affected systems work with
> intel_idle + the above patch instead of acpi_idle.

intel_idle enabled and the patch above applied. Got 1 feedback for now 
which tells that 1 out of 2 shutdown attempts failed. This is on Asus 
N61JQ (https://bugzilla.kernel.org/show_bug.cgi?id=27412).


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-29 17:49                   ` Ozan Çağlayan
@ 2011-01-30 20:30                     ` Ozan Çağlayan
  2011-01-30 22:48                       ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-30 20:30 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On 29.01.2011 19:49, Ozan Çağlayan wrote:

> intel_idle enabled and the patch above applied. Got 1 feedback for now
> which tells that 1 out of 2 shutdown attempts failed. This is on Asus
> N61JQ (https://bugzilla.kernel.org/show_bug.cgi?id=27412).
>
>

intel_idle + patch above doesn't help to the boot hang of Asus X61S.

-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-30 20:30                     ` Ozan Çağlayan
@ 2011-01-30 22:48                       ` Rafael J. Wysocki
  2011-01-31  8:53                         ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-30 22:48 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On Sunday, January 30, 2011, Ozan Çağlayan wrote:
> On 29.01.2011 19:49, Ozan Çağlayan wrote:
> 
> > intel_idle enabled and the patch above applied. Got 1 feedback for now
> > which tells that 1 out of 2 shutdown attempts failed. This is on Asus
> > N61JQ (https://bugzilla.kernel.org/show_bug.cgi?id=27412).
> >
> >
> 
> intel_idle + patch above doesn't help to the boot hang of Asus X61S.

Does booting with "nolapic" help on all of the affected systems?

Also, does disabling the CPUidle during boot help?

Finally, is the problem reproducible with CONFIG_NO_HZ unset?

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-30 22:48                       ` Rafael J. Wysocki
@ 2011-01-31  8:53                         ` Ozan Çağlayan
  2011-01-31  9:50                           ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-31  8:53 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On 31.01.2011 00:48, Rafael J. Wysocki wrote:

> Does booting with "nolapic" help on all of the affected systems?
>
> Also, does disabling the CPUidle during boot help?
>
> Finally, is the problem reproducible with CONFIG_NO_HZ unset?

Well on two machines, nolapic cures the boot hang and on one machine it 
cures the random shutdown hangs.

I'll compile a kernel with CONFIG_NO_HZ to see what happens but how do I 
disable cpuidle during boot? I've checked the kernel-parameters.txt but 
there's no cpuidle related boot parameter there.

Thanks


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31  8:53                         ` Ozan Çağlayan
@ 2011-01-31  9:50                           ` Rafael J. Wysocki
  2011-01-31 10:03                             ` Ozan Çağlayan
  2011-01-31 10:20                             ` Richard Schütz
  0 siblings, 2 replies; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31  9:50 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On Monday, January 31, 2011, Ozan Çağlayan wrote:
> On 31.01.2011 00:48, Rafael J. Wysocki wrote:
> 
> > Does booting with "nolapic" help on all of the affected systems?
> >
> > Also, does disabling the CPUidle during boot help?
> >
> > Finally, is the problem reproducible with CONFIG_NO_HZ unset?
> 
> Well on two machines, nolapic cures the boot hang and on one machine it 
> cures the random shutdown hangs.
> 
> I'll compile a kernel with CONFIG_NO_HZ to see what happens but how do I 
> disable cpuidle during boot? I've checked the kernel-parameters.txt but 
> there's no cpuidle related boot parameter there.

Booting with intel_idle.max_cstate=0 should do the trick.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31  9:50                           ` Rafael J. Wysocki
@ 2011-01-31 10:03                             ` Ozan Çağlayan
  2011-01-31 10:14                               ` Rafael J. Wysocki
  2011-01-31 10:20                             ` Richard Schütz
  1 sibling, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-31 10:03 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On 31.01.2011 11:50, Rafael J. Wysocki wrote:
> On Monday, January 31, 2011, Ozan Çağlayan wrote:
>> On 31.01.2011 00:48, Rafael J. Wysocki wrote:
>>
>>> Does booting with "nolapic" help on all of the affected systems?
>>>
>>> Also, does disabling the CPUidle during boot help?
>>>
>>> Finally, is the problem reproducible with CONFIG_NO_HZ unset?
>>
>> Well on two machines, nolapic cures the boot hang and on one machine it
>> cures the random shutdown hangs.
>>
>> I'll compile a kernel with CONFIG_NO_HZ to see what happens but how do I
>> disable cpuidle during boot? I've checked the kernel-parameters.txt but
>> there's no cpuidle related boot parameter there.
>
> Booting with intel_idle.max_cstate=0 should do the trick.

Okay but on Asus X61S idle fallbacks to cpuidle:

intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23

so forcing max_cstate to 0 will turn off the cpuidle on those machines too?


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 10:03                             ` Ozan Çağlayan
@ 2011-01-31 10:14                               ` Rafael J. Wysocki
  0 siblings, 0 replies; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 10:14 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Lionel Debroux, linux-acpi, linux-kernel, platform-driver-x86,
	colin.king

On Monday, January 31, 2011, Ozan Çağlayan wrote:
> On 31.01.2011 11:50, Rafael J. Wysocki wrote:
> > On Monday, January 31, 2011, Ozan Çağlayan wrote:
> >> On 31.01.2011 00:48, Rafael J. Wysocki wrote:
> >>
> >>> Does booting with "nolapic" help on all of the affected systems?
> >>>
> >>> Also, does disabling the CPUidle during boot help?
> >>>
> >>> Finally, is the problem reproducible with CONFIG_NO_HZ unset?
> >>
> >> Well on two machines, nolapic cures the boot hang and on one machine it
> >> cures the random shutdown hangs.
> >>
> >> I'll compile a kernel with CONFIG_NO_HZ to see what happens but how do I
> >> disable cpuidle during boot? I've checked the kernel-parameters.txt but
> >> there's no cpuidle related boot parameter there.
> >
> > Booting with intel_idle.max_cstate=0 should do the trick.
> 
> Okay but on Asus X61S idle fallbacks to cpuidle:
> 
> intel_idle: MWAIT substates: 0x3122220
> intel_idle: does not run on family 6 model 23
> 
> so forcing max_cstate to 0 will turn off the cpuidle on those machines too?

In those cases you can use processor.max_cstate=0 I think.

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31  9:50                           ` Rafael J. Wysocki
  2011-01-31 10:03                             ` Ozan Çağlayan
@ 2011-01-31 10:20                             ` Richard Schütz
  2011-01-31 10:23                               ` Rafael J. Wysocki
  1 sibling, 1 reply; 47+ messages in thread
From: Richard Schütz @ 2011-01-31 10:20 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Ozan Çağlayan, Lionel Debroux, linux-acpi,
	linux-kernel, platform-driver-x86, colin.king

>> I'll compile a kernel with CONFIG_NO_HZ to see what happens but how do I
>> disable cpuidle during boot? I've checked the kernel-parameters.txt but
>> there's no cpuidle related boot parameter there.
>
> Booting with intel_idle.max_cstate=0 should do the trick.

intel_idle.max_cstate=0 causes a fallback to the acpi_idle driver. So it 
does not disable the C-states directly.

-- 
Regards,
Richard Schütz

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 10:20                             ` Richard Schütz
@ 2011-01-31 10:23                               ` Rafael J. Wysocki
  2011-01-31 10:29                                 ` Richard Schütz
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 10:23 UTC (permalink / raw)
  To: Richard Schütz
  Cc: Ozan Çağlayan, Lionel Debroux, linux-acpi,
	linux-kernel, platform-driver-x86, colin.king

On Monday, January 31, 2011, Richard Schütz wrote:
> >> I'll compile a kernel with CONFIG_NO_HZ to see what happens but how do I
> >> disable cpuidle during boot? I've checked the kernel-parameters.txt but
> >> there's no cpuidle related boot parameter there.
> >
> > Booting with intel_idle.max_cstate=0 should do the trick.
> 
> intel_idle.max_cstate=0 causes a fallback to the acpi_idle driver. So it 
> does not disable the C-states directly.

What about not building the acpi_idle driver, then?

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 10:23                               ` Rafael J. Wysocki
@ 2011-01-31 10:29                                 ` Richard Schütz
  2011-01-31 18:24                                   ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Richard Schütz @ 2011-01-31 10:29 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Ozan Çağlayan, Lionel Debroux, linux-acpi,
	linux-kernel, platform-driver-x86, colin.king

>>>> I'll compile a kernel with CONFIG_NO_HZ to see what happens but how do I
>>>> disable cpuidle during boot? I've checked the kernel-parameters.txt but
>>>> there's no cpuidle related boot parameter there.
>>>
>>> Booting with intel_idle.max_cstate=0 should do the trick.
>>
>> intel_idle.max_cstate=0 causes a fallback to the acpi_idle driver. So it
>> does not disable the C-states directly.
>
> What about not building the acpi_idle driver, then?

Or just use the processor.max_cstate parameter then.

-- 
Regards,
Richard Schütz

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 10:29                                 ` Richard Schütz
@ 2011-01-31 18:24                                   ` Rafael J. Wysocki
  2011-01-31 18:29                                     ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 18:24 UTC (permalink / raw)
  To: Richard Schütz
  Cc: Ozan Çağlayan, Lionel Debroux, linux-acpi,
	linux-kernel, platform-driver-x86, colin.king

On Monday, January 31, 2011, Richard Schütz wrote:
> >>>> I'll compile a kernel with CONFIG_NO_HZ to see what happens but how do I
> >>>> disable cpuidle during boot? I've checked the kernel-parameters.txt but
> >>>> there's no cpuidle related boot parameter there.
> >>>
> >>> Booting with intel_idle.max_cstate=0 should do the trick.
> >>
> >> intel_idle.max_cstate=0 causes a fallback to the acpi_idle driver. So it
> >> does not disable the C-states directly.
> >
> > What about not building the acpi_idle driver, then?
> 
> Or just use the processor.max_cstate parameter then.

As I wrote a couple of messages ago, https://lkml.org/lkml/2011/1/31/52 .

Sure, that should do the trick too.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 18:24                                   ` Rafael J. Wysocki
@ 2011-01-31 18:29                                     ` Ozan Çağlayan
  2011-01-31 18:33                                       ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-31 18:29 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86, colin.king

On 31.01.2011 20:24, Rafael J. Wysocki wrote:

>>
>> Or just use the processor.max_cstate parameter then.
>
> As I wrote a couple of messages ago, https://lkml.org/lkml/2011/1/31/52 .

The users reported that processor.max_cstate=0 didn't help too. The ones 
which experience random hangs during shutdown tells that the hard disk 
is turned off and the fans are turning faster.

The other user which can't even boot didn't tell the result of adding 
processor.max_cstate=0 to boot params.


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 18:29                                     ` Ozan Çağlayan
@ 2011-01-31 18:33                                       ` Rafael J. Wysocki
  2011-01-31 18:38                                         ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 18:33 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86, colin.king

On Monday, January 31, 2011, Ozan Çağlayan wrote:
> On 31.01.2011 20:24, Rafael J. Wysocki wrote:
> 
> >>
> >> Or just use the processor.max_cstate parameter then.
> >
> > As I wrote a couple of messages ago, https://lkml.org/lkml/2011/1/31/52 .
> 
> The users reported that processor.max_cstate=0 didn't help too. The ones 
> which experience random hangs during shutdown tells that the hard disk 
> is turned off and the fans are turning faster.
> 
> The other user which can't even boot didn't tell the result of adding 
> processor.max_cstate=0 to boot params.

Well, I'm kind of not sure what to do next.

The expectation seems to be that the problem is somehow related to cpuidle,
but the above observations fail to confirm that.

Would it be possible to check if running the kernel in uniprocessor mode
makes the problem go away?

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 18:33                                       ` Rafael J. Wysocki
@ 2011-01-31 18:38                                         ` Ozan Çağlayan
  2011-01-31 19:12                                           ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-31 18:38 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86, colin.king

On 31.01.2011 20:33, Rafael J. Wysocki wrote:

>
> Would it be possible to check if running the kernel in uniprocessor mode
> makes the problem go away?

If that's the equivalent of booting with maxcpus=0, I now told them to 
give it a try.


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 18:38                                         ` Ozan Çağlayan
@ 2011-01-31 19:12                                           ` Rafael J. Wysocki
  2011-01-31 20:35                                             ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 19:12 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86, colin.king

On Monday, January 31, 2011, Ozan Çağlayan wrote:
> On 31.01.2011 20:33, Rafael J. Wysocki wrote:
> 
> >
> > Would it be possible to check if running the kernel in uniprocessor mode
> > makes the problem go away?
> 
> If that's the equivalent of booting with maxcpus=0, I now told them to 
> give it a try.

Booting with maxcpus=0 also disables the I/O APIC, which probably is a bit too
much, but let's see what happens in that case.

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 19:12                                           ` Rafael J. Wysocki
@ 2011-01-31 20:35                                             ` Ozan Çağlayan
  2011-01-31 20:42                                               ` Rafael J. Wysocki
  2011-01-31 20:42                                               ` Ozan Çağlayan
  0 siblings, 2 replies; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-31 20:35 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86, colin.king

On 31.01.2011 21:12, Rafael J. Wysocki wrote:

> Booting with maxcpus=0 also disables the I/O APIC, which probably is a bit too
> much, but let's see what happens in that case.

Well the only-booting-with-nolapic one doesn't boot with maxcpus=0. Pff, 
are there any compile-time(Kconfig) or runtime parameters related to 
debugging various subsystems that you'll suggest which will show where 
the boot hangs? That way we can maybe pinpoint the issue to a specific 
function call.


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 20:35                                             ` Ozan Çağlayan
@ 2011-01-31 20:42                                               ` Rafael J. Wysocki
  2011-01-31 20:42                                               ` Ozan Çağlayan
  1 sibling, 0 replies; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 20:42 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86, colin.king

On Monday, January 31, 2011, Ozan Çağlayan wrote:
> On 31.01.2011 21:12, Rafael J. Wysocki wrote:
> 
> > Booting with maxcpus=0 also disables the I/O APIC, which probably is a bit too
> > much, but let's see what happens in that case.
> 
> Well the only-booting-with-nolapic one doesn't boot with maxcpus=0. Pff, 
> are there any compile-time(Kconfig) or runtime parameters related to 
> debugging various subsystems that you'll suggest which will show where 
> the boot hangs? That way we can maybe pinpoint the issue to a specific 
> function call.

Booting with initcall_debug causes all of the initcalls to be shown (start,
finish and duration), so it may allow you to find the culprit if you can
collect the messages.

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 20:35                                             ` Ozan Çağlayan
  2011-01-31 20:42                                               ` Rafael J. Wysocki
@ 2011-01-31 20:42                                               ` Ozan Çağlayan
  2011-01-31 21:04                                                 ` Ozan Çağlayan
  1 sibling, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-31 20:42 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On 31.01.2011 22:35, Ozan Çağlayan wrote:

> Well the only-booting-with-nolapic one doesn't boot with maxcpus=0. Pff,
> are there any compile-time(Kconfig) or runtime parameters related to
> debugging various subsystems that you'll suggest which will show where
> the boot hangs? That way we can maybe pinpoint the issue to a specific
> function call.
>
>

Well I've actually a screenshot of the boot hang with tons of debugging 
parameters passed to kernel. Maybe it will give you a clue. It hangs 
right after printing e820 system memory map.

http://bugs.pardus.org.tr/attachment.cgi?id=6554

-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 20:42                                               ` Ozan Çağlayan
@ 2011-01-31 21:04                                                 ` Ozan Çağlayan
  2011-01-31 22:52                                                   ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-01-31 21:04 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On 31.01.2011 22:42, Ozan Çağlayan wrote:

> Well I've actually a screenshot of the boot hang with tons of debugging
> parameters passed to kernel. Maybe it will give you a clue. It hangs
> right after printing e820 system memory map.
>
> http://bugs.pardus.org.tr/attachment.cgi?id=6554
>

Well the line that is printed just after when booting with nolapic is NX 
(Execute Disable) protection: active
generated by x86_report_nx().

I looked through kernel/setup.c and can't really see anything between 
setup_memory_map() which dumps the e820 map and x86_report_nx() which 
could be affected by ACPI or nolapic. BTW, I've just seen that nolapic 
is only significant on X86_32. I didn't know that.


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 21:04                                                 ` Ozan Çağlayan
@ 2011-01-31 22:52                                                   ` Rafael J. Wysocki
  2011-02-03 21:10                                                     ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-01-31 22:52 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On Monday, January 31, 2011, Ozan Çağlayan wrote:
> On 31.01.2011 22:42, Ozan Çağlayan wrote:
> 
> > Well I've actually a screenshot of the boot hang with tons of debugging
> > parameters passed to kernel. Maybe it will give you a clue. It hangs
> > right after printing e820 system memory map.
> >
> > http://bugs.pardus.org.tr/attachment.cgi?id=6554
> >
> 
> Well the line that is printed just after when booting with nolapic is NX 
> (Execute Disable) protection: active
> generated by x86_report_nx().
> 
> I looked through kernel/setup.c and can't really see anything between 
> setup_memory_map() which dumps the e820 map and x86_report_nx() which 
> could be affected by ACPI or nolapic. BTW, I've just seen that nolapic 
> is only significant on X86_32. I didn't know that.

Well, it would be good to verify that the recent changes adding NX protection
to kernel data pages aren't causing these issues to appear.

Hmm.  Perhaps it's possible to test this patch on the affected boxes:
https://bugzilla.kernel.org/attachment.cgi?id=45192

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-01-31 22:52                                                   ` Rafael J. Wysocki
@ 2011-02-03 21:10                                                     ` Ozan Çağlayan
  2011-02-03 22:04                                                       ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-02-03 21:10 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86


>
> Hmm.  Perhaps it's possible to test this patch on the affected boxes:
> https://bugzilla.kernel.org/attachment.cgi?id=45192


Still no change with the patch..

-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-02-03 21:10                                                     ` Ozan Çağlayan
@ 2011-02-03 22:04                                                       ` Rafael J. Wysocki
  2011-02-03 22:13                                                         ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-02-03 22:04 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On Thursday, February 03, 2011, Ozan Çağlayan wrote:
> 
> >
> > Hmm.  Perhaps it's possible to test this patch on the affected boxes:
> > https://bugzilla.kernel.org/attachment.cgi?id=45192
> 
> 
> Still no change with the patch..

I guess we see a few different problems here.

Can you remind me, please, what the known workarounds are?

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-02-03 22:04                                                       ` Rafael J. Wysocki
@ 2011-02-03 22:13                                                         ` Ozan Çağlayan
  2011-02-03 22:51                                                           ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-02-03 22:13 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On 04.02.2011 00:04, Rafael J. Wysocki wrote:

>
> I guess we see a few different problems here.
>
> Can you remind me, please, what the known workarounds are?

OK in summary:

ASUS X71S - Doesn't boot without nolapic
ASUS F50SV - Doesn't boot without nolapic (latest tried and working 2.6.31)
ASUS N61JQ - X out of Y shutdown hangs (Cured with nolapic too)

Note that nolapic is the finer grained fix. acpi=off fixes the issue too.

Doesn't seem to be related to idle as processor.max_cstates=0 didn't help.

This is 2.6.37, intel_idle enabled with 2 upstream patches mentioned 
before + the mm fix.


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-02-03 22:13                                                         ` Ozan Çağlayan
@ 2011-02-03 22:51                                                           ` Rafael J. Wysocki
  2011-02-04  6:44                                                             ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-02-03 22:51 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On Thursday, February 03, 2011, Ozan Çağlayan wrote:
> On 04.02.2011 00:04, Rafael J. Wysocki wrote:
> 
> >
> > I guess we see a few different problems here.
> >
> > Can you remind me, please, what the known workarounds are?
> 
> OK in summary:
> 
> ASUS X71S - Doesn't boot without nolapic
> ASUS F50SV - Doesn't boot without nolapic (latest tried and working 2.6.31)
> ASUS N61JQ - X out of Y shutdown hangs (Cured with nolapic too)
> 
> Note that nolapic is the finer grained fix. acpi=off fixes the issue too.

Hmm.  Are those boxes uniprocessor running SMP kernels?

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-02-03 22:51                                                           ` Rafael J. Wysocki
@ 2011-02-04  6:44                                                             ` Ozan Çağlayan
  2011-02-04 20:36                                                               ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-02-04  6:44 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

Cuma 04 Şubat 2011 günü (saat 00:51:31) Rafael J. Wysocki şunları yazmıştı:

> Hmm.  Are those boxes uniprocessor running SMP kernels?

The kernel is SMP.

ASUS X61S is 
 CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a

F50SV has 2 CPU's too according to dmesg:
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] I/O APIC #2 Version 20 at 0xFEC00000.
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs

ASUS N51JQ (occasional shutdown hang) has:
CPU0: Intel(R) Core(TM) i7 CPU       Q 740  @ 1.73GHz stepping 05
[    0.132435] Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
[    0.768809] Brought up 8 CPUs


---
Ozan Çağlayan
TUBITAK/UEKAE - Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-02-04  6:44                                                             ` Ozan Çağlayan
@ 2011-02-04 20:36                                                               ` Rafael J. Wysocki
  2011-02-05 13:21                                                                 ` Ozan Çağlayan
  0 siblings, 1 reply; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-02-04 20:36 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On Friday, February 04, 2011, Ozan Çağlayan wrote:
> Cuma 04 Şubat 2011 günü (saat 00:51:31) Rafael J. Wysocki şunları yazmıştı:
> 
> > Hmm.  Are those boxes uniprocessor running SMP kernels?
> 
> The kernel is SMP.
> 
> ASUS X61S is 
>  CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
> 
> F50SV has 2 CPU's too according to dmesg:
> [    0.000000] Processor #0 (Bootup-CPU)
> [    0.000000] Processor #1
> [    0.000000] I/O APIC #2 Version 20 at 0xFEC00000.
> [    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
> [    0.000000] Processors: 2
> [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> 
> ASUS N51JQ (occasional shutdown hang) has:
> CPU0: Intel(R) Core(TM) i7 CPU       Q 740  @ 1.73GHz stepping 05
> [    0.132435] Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
> [    0.768809] Brought up 8 CPUs

OK, so it's not the case I was thinking of.  Ohwell.

At this point I guess it's best to open a bug entry in the kernel Bugzilla,
against ACPI (although ACPI may be a red herring), and put some system
information (ie. dmesg outputs from working kernels, if any, outputs of
acpidump) -- or links to where it can be found.

Thanks,
Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-02-04 20:36                                                               ` Rafael J. Wysocki
@ 2011-02-05 13:21                                                                 ` Ozan Çağlayan
  2011-02-05 18:16                                                                   ` Rafael J. Wysocki
  0 siblings, 1 reply; 47+ messages in thread
From: Ozan Çağlayan @ 2011-02-05 13:21 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On 04.02.2011 22:36, Rafael J. Wysocki wrote:

>
> At this point I guess it's best to open a bug entry in the kernel Bugzilla,
> against ACPI (although ACPI may be a red herring), and put some system
> information (ie. dmesg outputs from working kernels, if any, outputs of
> acpidump) -- or links to where it can be found.

Well I've already filed two bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=26502
https://bugzilla.kernel.org/show_bug.cgi?id=27412


-- 
Pardus Linux
http://www.pardus.org.tr/eng

^ permalink raw reply	[flat|nested] 47+ messages in thread

* Re: Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops)
  2011-02-05 13:21                                                                 ` Ozan Çağlayan
@ 2011-02-05 18:16                                                                   ` Rafael J. Wysocki
  0 siblings, 0 replies; 47+ messages in thread
From: Rafael J. Wysocki @ 2011-02-05 18:16 UTC (permalink / raw)
  To: Ozan Çağlayan
  Cc: Richard Schütz, Lionel Debroux, linux-acpi, linux-kernel,
	platform-driver-x86

On Saturday, February 05, 2011, Ozan Çağlayan wrote:
> On 04.02.2011 22:36, Rafael J. Wysocki wrote:
> 
> >
> > At this point I guess it's best to open a bug entry in the kernel Bugzilla,
> > against ACPI (although ACPI may be a red herring), and put some system
> > information (ie. dmesg outputs from working kernels, if any, outputs of
> > acpidump) -- or links to where it can be found.
> 
> Well I've already filed two bugs:
> https://bugzilla.kernel.org/show_bug.cgi?id=26502
> https://bugzilla.kernel.org/show_bug.cgi?id=27412

OK

So the conclusion from this thread is that disabling cpuidle doesn't help, right?

Did you carry out the !CONFIG_NO_HZ tests?

Rafael

^ permalink raw reply	[flat|nested] 47+ messages in thread

end of thread, other threads:[~2011-02-05 18:17 UTC | newest]

Thread overview: 47+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-23 14:28 Common boot/shutdown issues with the latest 2.6.37 (Mostly Asus laptops) Ozan Çağlayan
2011-01-23 15:00 ` Richard Schütz
2011-01-23 15:11   ` Gene Heskett
2011-01-23 16:49   ` Ozan Çağlayan
2011-01-23 16:56 ` Ozan Çağlayan
2011-01-23 20:24 ` Ozan Çağlayan
2011-01-24  9:00   ` Ozan Çağlayan
2011-01-24  9:04   ` Lionel Debroux
2011-01-24  9:21     ` Ozan Çağlayan
2011-01-24  9:47       ` Lionel Debroux
2011-01-24 20:14         ` Lionel Debroux
2011-01-25  2:56           ` Len Brown
2011-01-26  7:41             ` Lionel Debroux
2011-01-27  7:59               ` Lionel Debroux
2011-01-25  6:22           ` Ozan Çağlayan
2011-01-25 19:38             ` Rafael J. Wysocki
2011-01-25 19:45               ` Ozan Çağlayan
2011-01-25 19:54                 ` Rafael J. Wysocki
2011-01-25 20:00                   ` Ozan Çağlayan
2011-01-29 17:49                   ` Ozan Çağlayan
2011-01-30 20:30                     ` Ozan Çağlayan
2011-01-30 22:48                       ` Rafael J. Wysocki
2011-01-31  8:53                         ` Ozan Çağlayan
2011-01-31  9:50                           ` Rafael J. Wysocki
2011-01-31 10:03                             ` Ozan Çağlayan
2011-01-31 10:14                               ` Rafael J. Wysocki
2011-01-31 10:20                             ` Richard Schütz
2011-01-31 10:23                               ` Rafael J. Wysocki
2011-01-31 10:29                                 ` Richard Schütz
2011-01-31 18:24                                   ` Rafael J. Wysocki
2011-01-31 18:29                                     ` Ozan Çağlayan
2011-01-31 18:33                                       ` Rafael J. Wysocki
2011-01-31 18:38                                         ` Ozan Çağlayan
2011-01-31 19:12                                           ` Rafael J. Wysocki
2011-01-31 20:35                                             ` Ozan Çağlayan
2011-01-31 20:42                                               ` Rafael J. Wysocki
2011-01-31 20:42                                               ` Ozan Çağlayan
2011-01-31 21:04                                                 ` Ozan Çağlayan
2011-01-31 22:52                                                   ` Rafael J. Wysocki
2011-02-03 21:10                                                     ` Ozan Çağlayan
2011-02-03 22:04                                                       ` Rafael J. Wysocki
2011-02-03 22:13                                                         ` Ozan Çağlayan
2011-02-03 22:51                                                           ` Rafael J. Wysocki
2011-02-04  6:44                                                             ` Ozan Çağlayan
2011-02-04 20:36                                                               ` Rafael J. Wysocki
2011-02-05 13:21                                                                 ` Ozan Çağlayan
2011-02-05 18:16                                                                   ` Rafael J. Wysocki

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).