LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@gmail.com>
To: Dejin Zheng <zhengdejin5@gmail.com>,
	balbi@kernel.org, gregkh@linuxfoundation.org,
	linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1] usb: dwc3: core: fix a issue about clear connect state
Date: Sun, 18 Oct 2020 20:40:01 +0300
Message-ID: <4dcdcdcf-2878-f6b1-e85a-6cb2a478ed1a@gmail.com> (raw)
In-Reply-To: <20201018134734.10406-1-zhengdejin5@gmail.com>

Hello!

On 10/18/20 4:47 PM, Dejin Zheng wrote:

> According to Synopsys Programming Guide chapter 2.2 Register Resets,
> it cannot reset the DCTL register by set DCTL.CSFTRST for Core Soft Reset,

   s/set/setting/.

> if DWC3 controller as a slave device and stay connected with a usb host,
> then, reboot linux, it will fail to reinitialize dwc3 as a slave device

   s/reboot/while rebooting/.

> when the DWC3 controller did not power off. because the connection status
> is incorrect, so we also need clear DCTL.RUN_STOP bit for disable connect
                               ^ to                               ^ ing

> when do core soft reset.
         ^ ing

> Fixes: f59dcab176293b6 ("usb: dwc3: core: improve reset sequence")
> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
[...]

MBR, Sergei

  reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-18 13:47 Dejin Zheng
2020-10-18 17:40 ` Sergei Shtylyov [this message]
2020-10-27  9:12 ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4dcdcdcf-2878-f6b1-e85a-6cb2a478ed1a@gmail.com \
    --to=sergei.shtylyov@gmail.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=zhengdejin5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git