* Re: [Qemu-devel] x86, nops settings result in kernel crash
2012-08-16 21:51 ` [Qemu-devel] " Anthony Liguori
@ 2012-08-17 7:43 ` Tomas Racek
2012-08-17 8:09 ` Borislav Petkov
0 siblings, 1 reply; 16+ messages in thread
From: Tomas Racek @ 2012-08-17 7:43 UTC (permalink / raw)
To: Anthony Liguori
Cc: qemu-devel, H. Peter Anvin, Borislav Petkov, linux-kernel,
Alan Cox, kvm-devel, Avi Kivity, Marcelo Tosatti, Alan Cox
[-- Attachment #1: Type: text/plain, Size: 4934 bytes --]
----- Original Message -----
> Alan Cox <alan@lxorguk.ukuu.org.uk> writes:
>
> > On Thu, 16 Aug 2012 14:45:15 -0400 (EDT)
> > Tomas Racek <tracek@redhat.com> wrote:
> >
> >> ----- Original Message -----
> >> > On Thu, Aug 16, 2012 at 09:35:12AM -0400, Tomas Racek wrote:
> >> > > Hi,
> >> > >
> >> > > I am writing a file system test which I execute in qemu with
> >> > > kernel
> >> > > compiled from latest git sources and running it causes this
> >> > > error:
> >> > >
> >> > > https://bugzilla.kernel.org/show_bug.cgi?id=45971
> >> > >
> >> > > It works with v3.5, so I ran git bisect which pointed me to:
> >> > >
> >> > > d6250a3f12edb3a86db9598ffeca3de8b4a219e9 x86, nops: Missing
> >> > > break
> >> > > resulting in incorrect selection on Intel
> >> > >
> >> > > To be quite honest, I don't understand this stuff much but I
> >> > > tried
> >> > > to do some debugging and I figured out (I hope) that the crash
> >> > > is
> >> > > caused by setting ideal_nops to p6_nops (k8_nops was used
> >> > > before
> >> > > the break statement was added).
> >> >
> >> > Maybe I overlooked it or maybe it was implied but did you try
> >> > reverting
> >> > the patch and rerunning your test? Does it work ok then?
> >> >
> >>
> >> Yes, if I remove the break statement (introduced by this commit),
> >> it works fine.
> >
> > What version of qemu is this - do we have qemu bug here I wonder.
>
> From the cpuinfo, it's 0.15.1. That's old but not ancient.
I've just upgraded my distribution so I tried qemu 1.0.1 which has the same behaviour as the former version.
>
> I took a brief look at the kernel code here. The default invocation
> of
> qemu presents an idealistic CPU with a very minimum feature bit set
> exposed. No processor has ever existed with this feature set.
>
> We do this in order to maintain compatibility when migration from
> Intel
> to AMD but also for legacy reasons.
>
> From the report, using '-cpu host' solves the problem. '-cpu host'
> exposes most of the host CPUID to the guest.
Well, I've added some debug statements to the code:
void __init arch_init_ideal_nops(void)
{
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
/*
* Due to a decoder implementation quirk, some
* specific Intel CPUs actually perform better with
* the "k8_nops" than with the SDM-recommended NOPs.
*/
if (boot_cpu_data.x86 == 6 &&
boot_cpu_data.x86_model >= 0x0f &&
boot_cpu_data.x86_model != 0x1c &&
boot_cpu_data.x86_model != 0x26 &&
boot_cpu_data.x86_model != 0x27 &&
boot_cpu_data.x86_model < 0x30) {
printk("NOPS: Option 1\n");
ideal_nops = k8_nops;
} else if (boot_cpu_has(X86_FEATURE_NOPL)) {
printk("NOPS: Option 2\n");
ideal_nops = p6_nops;
} else {
printk("NOPS: Option 3\n");
#ifdef CONFIG_X86_64
ideal_nops = k8_nops;
#else
ideal_nops = intel_nops;
#endif
}
break;
default:
#ifdef CONFIG_X86_64
ideal_nops = k8_nops;
#else
if (boot_cpu_has(X86_FEATURE_K8))
ideal_nops = k8_nops;
else if (boot_cpu_has(X86_FEATURE_K7))
ideal_nops = k7_nops;
else
ideal_nops = intel_nops;
#endif
}
}
This gives me Option 1 with "-cpu host" and Option 2 without.
> That said, QEMU really doesn't do anything differently depending on
> what
> feature bits are exposed to the guest. So my guess is that the odd
> combination of CPUID bits that are exposed to the guest is confusing
> the
> kernel.
>
> Can you post dmesg from the host kernel? Perhaps there's instruction
> emulation failing in the host KVM? That would manifest in strange
> behavior in the guest.
dmesg is in the attachment (qemu ran without "-cpu" argument). If I add "-cpu host" I get this:
[ 1046.112320] kvm: 5938: cpu0 unhandled rdmsr: 0x345
[ 1046.114998] kvm: 5938: cpu0 unhandled wrmsr: 0x680 data 0
[ 1046.115000] kvm: 5938: cpu0 unhandled wrmsr: 0x6c0 data 0
[ 1046.115002] kvm: 5938: cpu0 unhandled wrmsr: 0x681 data 0
[ 1046.115004] kvm: 5938: cpu0 unhandled wrmsr: 0x6c1 data 0
[ 1046.115005] kvm: 5938: cpu0 unhandled wrmsr: 0x682 data 0
[ 1046.115007] kvm: 5938: cpu0 unhandled wrmsr: 0x6c2 data 0
[ 1046.115009] kvm: 5938: cpu0 unhandled wrmsr: 0x683 data 0
[ 1046.115010] kvm: 5938: cpu0 unhandled wrmsr: 0x6c3 data 0
[ 1046.115012] kvm: 5938: cpu0 unhandled wrmsr: 0x684 data 0
[ 1046.115013] kvm: 5938: cpu0 unhandled wrmsr: 0x6c4 data 0
Regards,
Tomas
>
> Regards,
>
> Anthony Liguori
>
> >
> > Alan
>
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 71841 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.1-1.fc17.x86_64 (mockbuild@buildvm-23.phx2.fedoraproject.org) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Thu Aug 9 17:50:43 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.1-1.fc17.x86_64 root=/dev/mapper/vg_luke-lv_root ro rd.md=0 rd.dm=0 KEYTABLE=us SYSFONT=True rd.lvm.lv=vg_luke/lv_root rd.luks=0 rd.lvm.lv=vg_luke/lv_swap LANG=en_US.UTF-8 rhgb quiet
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da89efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da89f000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 4174BH4/4174BH4, BIOS 8CET51WW (1.31 ) 11/29/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21F000000 mask FFF000000 uncachable
[ 0.000000] 9 base 21E800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
[ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1f923000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21e5fffff]
[ 0.000000] [mem 0x100000000-0x21e5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x21e5fffff @ [mem 0xda895000-0xda89efff]
[ 0.000000] RAMDISK: [mem 0x34650000-0x3631ffff]
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000daffe120 000AC (v01 LENOVO TP-8C 00001310 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafe8000 000F4 (v04 LENOVO TP-8C 00001310 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000dafeb000 0E17D (v01 LENOVO TP-8C 00001310 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf2d000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8C 00001310 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000dafe7000 00038 (v01 LENOVO TP-8C 00001310 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafe6000 00098 (v01 LENOVO TP-8C 00001310 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafe5000 0003C (v01 LENOVO TP-8C 00001310 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000dafe4000 00052 (v01 LENOVO TP-8C 00001310 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000dafea000 000A5 (v32 LENOVO TP-8C 00001310 PTL 00000002)
[ 0.000000] ACPI: TCPA 00000000dafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000dafe2000 00A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 00000000dafe0000 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-8C 00001310 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafdd000 00292 (v01 LENOVO TP-8C 00001310 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21e5fffff]
[ 0.000000] NODE_DATA [mem 0x21e5ec000-0x21e5fffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215c00000-ffff88021dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xda89efff]
[ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x21e5fffff]
[ 0.000000] On node 0 totalpages: 2066989
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 873696 pages, LIFO batch:31
[ 0.000000] Normal zone: 18328 pages used for memmap
[ 0.000000] Normal zone: 1154664 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da89f000 - 00000000dae9f000
[ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000
[ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd20000
[ 0.000000] PM: Registered nosave memory: 00000000ffd20000 - 0000000100000000
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021e200000 s83072 r8192 d23424 u262144
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2032271
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.1-1.fc17.x86_64 root=/dev/mapper/vg_luke-lv_root ro rd.md=0 rd.dm=0 KEYTABLE=us SYSFONT=True rd.lvm.lv=vg_luke/lv_root rd.luks=0 rd.lvm.lv=vg_luke/lv_swap LANG=en_US.UTF-8 rhgb quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8024160k/8886272k available (6237k kernel code, 618316k absent, 243796k reserved, 6944k data, 1016k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2591.326 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5182.65 BogoMIPS (lpj=2591326)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000033] Security Framework initialized
[ 0.000039] SELinux: Initializing.
[ 0.000045] SELinux: Starting in permissive mode
[ 0.000643] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002249] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002899] Mount-cache hash table entries: 256
[ 0.003066] Initializing cgroup subsys cpuacct
[ 0.003068] Initializing cgroup subsys memory
[ 0.003078] Initializing cgroup subsys devices
[ 0.003080] Initializing cgroup subsys freezer
[ 0.003081] Initializing cgroup subsys net_cls
[ 0.003082] Initializing cgroup subsys blkio
[ 0.003083] Initializing cgroup subsys perf_event
[ 0.003105] Disabled fast string operations
[ 0.003107] CPU: Physical Processor ID: 0
[ 0.003107] CPU: Processor Core ID: 0
[ 0.003111] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003111] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003113] mce: CPU supports 7 MCE banks
[ 0.003124] CPU0: Thermal monitoring enabled (TM1)
[ 0.003130] using mwait in idle threads.
[ 0.004061] ACPI: Core revision 20120320
[ 0.020446] ftrace: allocating 23064 entries in 91 pages
[ 0.030329] DMAR: Host address width 36
[ 0.030332] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.030338] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.030339] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.030342] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.030343] DMAR: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff
[ 0.030345] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.030415] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.030415] HPET id 0 under DRHD base 0xfed91000
[ 0.030416] HPET id 0 under DRHD base 0xfed91000
[ 0.030417] HPET id 0 under DRHD base 0xfed91000
[ 0.030418] HPET id 0 under DRHD base 0xfed91000
[ 0.030418] HPET id 0 under DRHD base 0xfed91000
[ 0.030419] HPET id 0 under DRHD base 0xfed91000
[ 0.030419] HPET id 0 under DRHD base 0xfed91000
[ 0.030420] HPET id 0 under DRHD base 0xfed91000
[ 0.030624] Enabled IRQ remapping in x2apic mode
[ 0.030625] Enabling x2apic
[ 0.030626] Enabled x2apic
[ 0.030631] Switched APIC routing to cluster x2apic.
[ 0.031076] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041080] CPU0: Intel(R) Core(TM) i5-2540M CPU @ 2.60GHz stepping 07
[ 0.142968] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.142973] PEBS disabled due to CPU errata.
[ 0.142974] ... version: 3
[ 0.142975] ... bit width: 48
[ 0.142976] ... generic registers: 4
[ 0.142976] ... value mask: 0000ffffffffffff
[ 0.142977] ... max period: 000000007fffffff
[ 0.142978] ... fixed-purpose events: 3
[ 0.142978] ... event mask: 000000070000000f
[ 0.143472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.154580] Disabled fast string operations
[ 0.167776] Disabled fast string operations
[ 0.180964] Disabled fast string operations
[ 0.143557] Booting Node 0, Processors #1 #2 #3
[ 0.183100] Brought up 4 CPUs
[ 0.183103] Total of 4 processors activated (20730.60 BogoMIPS).
[ 0.186166] devtmpfs: initialized
[ 0.186337] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.186950] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.186978] RTC time: 15:55:13, date: 08/17/12
[ 0.187005] NET: Registered protocol family 16
[ 0.187141] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.187142] ACPI: bus type pci registered
[ 0.187362] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.187364] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.193081] PCI: Using configuration type 1 for base access
[ 0.193707] bio: create slab <bio-0> at 0
[ 0.193758] ACPI: Added _OSI(Module Device)
[ 0.193759] ACPI: Added _OSI(Processor Device)
[ 0.193762] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.193763] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.195045] ACPI: EC: EC description table is found, configuring boot EC
[ 0.198658] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.210417] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.210741] ACPI: Dynamic OEM Table Load:
[ 0.210743] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.213189] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.213533] ACPI: Dynamic OEM Table Load:
[ 0.213534] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.216083] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.216400] ACPI: Dynamic OEM Table Load:
[ 0.216401] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.219437] ACPI: Interpreter enabled
[ 0.219439] ACPI: (supports S0 S3 S4 S5)
[ 0.219455] ACPI: Using IOAPIC for interrupt routing
[ 0.224344] ACPI: Power Resource [PUBS] (on)
[ 0.226787] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.227515] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.227518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.227599] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.227621] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.227623] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.227624] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.227626] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfebfffff]
[ 0.227628] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff]
[ 0.227652] PCI host bridge to bus 0000:00
[ 0.227654] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.227655] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.227657] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.227658] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
[ 0.227659] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.227667] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.227700] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.227709] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.227714] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.227718] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.227768] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.227791] pci 0000:00:16.0: reg 10: [mem 0xf1625000-0xf162500f 64bit]
[ 0.227866] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.227891] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 0.227909] pci 0000:00:16.3: reg 10: [io 0x40b0-0x40b7]
[ 0.227918] pci 0000:00:16.3: reg 14: [mem 0xf162c000-0xf162cfff]
[ 0.228017] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.228034] pci 0000:00:19.0: reg 10: [mem 0xf1600000-0xf161ffff]
[ 0.228043] pci 0000:00:19.0: reg 14: [mem 0xf162b000-0xf162bfff]
[ 0.228051] pci 0000:00:19.0: reg 18: [io 0x4080-0x409f]
[ 0.228113] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.228138] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.228158] pci 0000:00:1a.0: reg 10: [mem 0xf162a000-0xf162a3ff]
[ 0.228247] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.228272] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.228287] pci 0000:00:1b.0: reg 10: [mem 0xf1620000-0xf1623fff 64bit]
[ 0.228353] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.228375] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.228452] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.228476] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.228552] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.228578] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.228655] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.228680] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.228756] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.228787] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.228807] pci 0000:00:1d.0: reg 10: [mem 0xf1629000-0xf16293ff]
[ 0.228896] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.228920] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.229049] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.229066] pci 0000:00:1f.2: reg 10: [io 0x40a8-0x40af]
[ 0.229074] pci 0000:00:1f.2: reg 14: [io 0x40bc-0x40bf]
[ 0.229081] pci 0000:00:1f.2: reg 18: [io 0x40a0-0x40a7]
[ 0.229089] pci 0000:00:1f.2: reg 1c: [io 0x40b8-0x40bb]
[ 0.229096] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.229104] pci 0000:00:1f.2: reg 24: [mem 0xf1628000-0xf16287ff]
[ 0.229148] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.229166] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.229181] pci 0000:00:1f.3: reg 10: [mem 0xf1624000-0xf16240ff 64bit]
[ 0.229201] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.229271] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.229359] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000
[ 0.229403] pci 0000:03:00.0: reg 10: [mem 0xf1500000-0xf1501fff 64bit]
[ 0.229618] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.230972] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.230986] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.231123] pci 0000:05:00.0: [1180:e823] type 00 class 0x088000
[ 0.231141] pci 0000:05:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.231166] pci 0000:05:00.0: reg 10: [mem 0xf0d00000-0xf0d000ff]
[ 0.231361] pci 0000:05:00.0: supports D1 D2
[ 0.231363] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.232991] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.233001] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.233009] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.233022] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.233100] pci 0000:0d:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.233126] pci 0000:0d:00.0: reg 10: [mem 0xf0c00000-0xf0c01fff 64bit]
[ 0.233258] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 0.234958] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.234972] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.235035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.235092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.235110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.235126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.235146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.235237] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.235352] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.235353] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.236863] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.236908] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.236953] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.236994] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.237035] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.237077] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.237117] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.237157] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.237227] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.237231] vgaarb: loaded
[ 0.237232] vgaarb: bridge control possible 0000:00:02.0
[ 0.237277] SCSI subsystem initialized
[ 0.237304] libata version 3.00 loaded.
[ 0.237319] ACPI: bus type usb registered
[ 0.237330] usbcore: registered new interface driver usbfs
[ 0.237338] usbcore: registered new interface driver hub
[ 0.237353] usbcore: registered new device driver usb
[ 0.237389] PCI: Using ACPI for IRQ routing
[ 0.239305] PCI: pci_cache_line_size set to 64 bytes
[ 0.239497] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.239498] e820: reserve RAM buffer [mem 0xda89f000-0xdbffffff]
[ 0.239500] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.239501] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[ 0.239567] NetLabel: Initializing
[ 0.239568] NetLabel: domain hash size = 128
[ 0.239568] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.239578] NetLabel: unlabeled traffic allowed by default
[ 0.239622] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.239627] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.242646] Switching to clocksource hpet
[ 0.247145] pnp: PnP ACPI init
[ 0.247159] ACPI: bus type pnp registered
[ 0.247431] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.247433] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.247434] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.247435] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.247436] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.247437] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.247438] pnp 00:00: [mem 0x000d4000-0x000d7fff]
[ 0.247439] pnp 00:00: [mem 0x000d8000-0x000dbfff]
[ 0.247440] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.247441] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.247442] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.247443] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.247444] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.247445] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.247447] pnp 00:00: [mem 0x00100000-0xdf9fffff]
[ 0.247448] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.247449] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.247490] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.247492] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.247493] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.247495] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.247496] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.247497] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.247499] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.247500] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.247501] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.247503] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.247504] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.247505] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.247507] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.247508] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.247509] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.247511] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.247513] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.247516] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.247531] pnp 00:01: [bus 00-fe]
[ 0.247532] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.247534] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.247535] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.247536] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.247538] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.247539] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.247540] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.247541] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.247542] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.247543] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.247545] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.247546] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.247547] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.247548] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.247549] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.247550] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.247552] pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
[ 0.247553] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.247594] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.247640] pnp 00:02: [io 0x0010-0x001f]
[ 0.247642] pnp 00:02: [io 0x0090-0x009f]
[ 0.247643] pnp 00:02: [io 0x0024-0x0025]
[ 0.247644] pnp 00:02: [io 0x0028-0x0029]
[ 0.247645] pnp 00:02: [io 0x002c-0x002d]
[ 0.247647] pnp 00:02: [io 0x0030-0x0031]
[ 0.247648] pnp 00:02: [io 0x0034-0x0035]
[ 0.247649] pnp 00:02: [io 0x0038-0x0039]
[ 0.247650] pnp 00:02: [io 0x003c-0x003d]
[ 0.247651] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.247652] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.247653] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.247654] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.247655] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.247656] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.247657] pnp 00:02: [io 0x0050-0x0053]
[ 0.247658] pnp 00:02: [io 0x0072-0x0077]
[ 0.247659] pnp 00:02: [io 0x0400-0x047f]
[ 0.247660] pnp 00:02: [io 0x0500-0x057f]
[ 0.247661] pnp 00:02: [io 0x0800-0x080f]
[ 0.247662] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.247663] pnp 00:02: [io 0x1600-0x167f]
[ 0.247673] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[ 0.247675] pnp 00:02: [mem 0x00000000-0x00000fff]
[ 0.247676] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.247677] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.247678] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.247679] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.247680] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.247716] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.247718] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.247719] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.247721] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.247722] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.247724] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.247725] system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.247727] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.247728] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.247730] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.247731] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.247732] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.247734] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247766] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.247784] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.247790] pnp 00:04: [io 0x0000-0x000f]
[ 0.247791] pnp 00:04: [io 0x0080-0x008f]
[ 0.247792] pnp 00:04: [io 0x00c0-0x00df]
[ 0.247794] pnp 00:04: [dma 4]
[ 0.247809] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.247814] pnp 00:05: [io 0x0061]
[ 0.247830] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.247835] pnp 00:06: [io 0x00f0]
[ 0.247846] pnp 00:06: [irq 13]
[ 0.247862] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.247867] pnp 00:07: [io 0x0070-0x0071]
[ 0.247873] pnp 00:07: [irq 8]
[ 0.247889] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.247895] pnp 00:08: [io 0x0060]
[ 0.247896] pnp 00:08: [io 0x0064]
[ 0.247901] pnp 00:08: [irq 1]
[ 0.247916] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.247925] pnp 00:09: [irq 12]
[ 0.247943] pnp 00:09: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.247967] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.247984] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.248342] pnp: PnP ACPI: found 11 devices
[ 0.248343] ACPI: ACPI bus type pnp unregistered
[ 0.254543] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.254555] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.254561] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.254569] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.254571] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.254576] pci 0000:00:1c.3: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.254580] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.254586] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.254591] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.254634] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.254636] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.254637] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.254638] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.254639] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.254641] pci_bus 0000:03: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.254642] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.254644] pci_bus 0000:05: resource 1 [mem 0xf0d00000-0xf14fffff]
[ 0.254645] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.254646] pci_bus 0000:0d: resource 1 [mem 0xf0c00000-0xf0cfffff]
[ 0.254678] NET: Registered protocol family 2
[ 0.254852] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.256392] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.257511] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.257632] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.257633] TCP: reno registered
[ 0.257648] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.257689] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.257761] NET: Registered protocol family 1
[ 0.257773] pci 0000:00:02.0: Boot video device
[ 0.257791] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.257794] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.257845] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.257848] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.258023] PCI: CLS 64 bytes, default 64
[ 0.258058] Unpacking initramfs...
[ 0.703554] Freeing initrd memory: 29504k freed
[ 0.707895] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.707899] software IO TLB [mem 0xd6895000-0xda894fff] (64MB) mapped at [ffff8800d6895000-ffff8800da894fff]
[ 0.710351] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.710569] audit: initializing netlink socket (disabled)
[ 0.710578] type=2000 audit(1345218913.590:1): initialized
[ 0.726729] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.728089] VFS: Disk quotas dquot_6.5.2
[ 0.728119] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.728395] msgmni has been set to 15729
[ 0.728435] SELinux: Registering netfilter hooks
[ 0.728798] alg: No test for stdrng (krng)
[ 0.728804] NET: Registered protocol family 38
[ 0.728834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.728854] io scheduler noop registered
[ 0.728855] io scheduler deadline registered
[ 0.728876] io scheduler cfq registered (default)
[ 0.729114] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.729127] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.729128] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.729257] acpiphp: Slot [1] registered
[ 0.729306] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.729307] vesafb: scrolling: redraw
[ 0.729309] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.729629] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005800000, using 3072k, total 3072k
[ 0.729680] Console: switching to colour frame buffer device 128x48
[ 0.779835] fb0: VESA VGA frame buffer device
[ 0.779843] intel_idle: MWAIT substates: 0x21120
[ 0.779844] intel_idle: v0.4 model 0x2A
[ 0.779845] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.780443] ACPI: AC Adapter [AC] (on-line)
[ 0.780580] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.780756] ACPI: Lid Switch [LID]
[ 0.780796] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.780799] ACPI: Sleep Button [SLPB]
[ 0.780874] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.780876] ACPI: Power Button [PWRF]
[ 0.781014] ACPI: Requesting acpi_cpufreq
[ 0.785413] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.785415] ACPI: Thermal Zone [THM0] (43 C)
[ 0.785431] GHES: HEST is not enabled!
[ 0.785534] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.806320] 0000:00:16.3: ttyS0 at I/O 0x40b0 (irq = 19) is a 16550A
[ 0.806698] Non-volatile memory driver v1.3
[ 0.806700] Linux agpgart interface v0.103
[ 0.806780] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 0.806863] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.807794] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.807884] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.808669] loop: module loaded
[ 0.808712] ahci 0000:00:1f.2: version 3.0
[ 0.808803] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.808829] ahci: SSS flag set, parallel bus scan disabled
[ 0.818955] ACPI: Battery Slot [BAT0] (battery present)
[ 0.819533] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[ 0.819541] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 0.819550] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.823855] scsi0 : ahci
[ 0.823912] scsi1 : ahci
[ 0.823963] scsi2 : ahci
[ 0.824009] scsi3 : ahci
[ 0.824060] scsi4 : ahci
[ 0.824105] scsi5 : ahci
[ 0.824436] ata1: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628100 irq 42
[ 0.824438] ata2: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628180 irq 42
[ 0.824439] ata3: DUMMY
[ 0.824440] ata4: DUMMY
[ 0.824442] ata5: SATA max UDMA/133 abar m2048@0xf1628000 port 0xf1628300 irq 42
[ 0.824443] ata6: DUMMY
[ 0.824513] Fixed MDIO Bus: probed
[ 0.824558] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.824568] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 0.824571] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 0.824588] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.824591] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.824629] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.824652] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.828527] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.828538] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf162a000
[ 0.834511] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.834563] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.834567] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.834572] usb usb1: Product: EHCI Host Controller
[ 0.834584] usb usb1: Manufacturer: Linux 3.5.1-1.fc17.x86_64 ehci_hcd
[ 0.834585] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.834668] hub 1-0:1.0: USB hub found
[ 0.834671] hub 1-0:1.0: 3 ports detected
[ 0.834715] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.834718] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.834733] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.834736] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.834768] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.834789] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.838684] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.838696] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1629000
[ 0.844507] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.844550] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.844555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.844559] usb usb2: Product: EHCI Host Controller
[ 0.844563] usb usb2: Manufacturer: Linux 3.5.1-1.fc17.x86_64 ehci_hcd
[ 0.844566] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.844651] hub 2-0:1.0: USB hub found
[ 0.844653] hub 2-0:1.0: 3 ports detected
[ 0.844692] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.844698] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.844729] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 0.844763] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 3
[ 0.844918] xhci_hcd 0000:0d:00.0: irq 16, io mem 0xf0c00000
[ 0.844978] xhci_hcd 0000:0d:00.0: irq 43 for MSI/MSI-X
[ 0.844983] xhci_hcd 0000:0d:00.0: irq 44 for MSI/MSI-X
[ 0.844988] xhci_hcd 0000:0d:00.0: irq 45 for MSI/MSI-X
[ 0.844992] xhci_hcd 0000:0d:00.0: irq 46 for MSI/MSI-X
[ 0.844996] xhci_hcd 0000:0d:00.0: irq 47 for MSI/MSI-X
[ 0.845094] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.845096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.845097] usb usb3: Product: xHCI Host Controller
[ 0.845098] usb usb3: Manufacturer: Linux 3.5.1-1.fc17.x86_64 xhci_hcd
[ 0.845099] usb usb3: SerialNumber: 0000:0d:00.0
[ 0.845145] xHCI xhci_add_endpoint called for root hub
[ 0.845147] xHCI xhci_check_bandwidth called for root hub
[ 0.845161] hub 3-0:1.0: USB hub found
[ 0.845167] hub 3-0:1.0: 2 ports detected
[ 0.845205] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[ 0.845235] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 4
[ 0.848348] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.848349] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.848350] usb usb4: Product: xHCI Host Controller
[ 0.848351] usb usb4: Manufacturer: Linux 3.5.1-1.fc17.x86_64 xhci_hcd
[ 0.848352] usb usb4: SerialNumber: 0000:0d:00.0
[ 0.848404] xHCI xhci_add_endpoint called for root hub
[ 0.848405] xHCI xhci_check_bandwidth called for root hub
[ 0.848420] hub 4-0:1.0: USB hub found
[ 0.848426] hub 4-0:1.0: 2 ports detected
[ 0.853560] usbcore: registered new interface driver usbserial
[ 0.853582] usbcore: registered new interface driver usbserial_generic
[ 0.853587] USB Serial support registered for generic
[ 0.853588] usbserial: USB Serial Driver core
[ 0.853613] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.857275] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.857279] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.857340] mousedev: PS/2 mouse device common for all mice
[ 0.857487] rtc_cmos 00:07: RTC can wake from S4
[ 0.857602] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.857629] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.857676] device-mapper: uevent: version 1.0.3
[ 0.857732] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.857823] cpuidle: using governor ladder
[ 0.857893] cpuidle: using governor menu
[ 0.858210] EFI Variables Facility v0.08 2004-May-17
[ 0.858272] usbcore: registered new interface driver usbhid
[ 0.858272] usbhid: USB HID core driver
[ 0.858288] drop_monitor: Initializing network drop monitor service
[ 0.858368] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.858394] TCP: cubic registered
[ 0.858396] Initializing XFRM netlink socket
[ 0.858466] NET: Registered protocol family 10
[ 0.858614] mip6: Mobile IPv6
[ 0.858616] NET: Registered protocol family 17
[ 0.858626] Key type dns_resolver registered
[ 0.858758] PM: Hibernation image not present or could not be loaded.
[ 0.858765] registered taskstats version 1
[ 0.859366] Magic number: 8:770:942
[ 0.859441] rtc_cmos 00:07: setting system clock to 2012-08-17 15:55:14 UTC (1345218914)
[ 0.862355] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.128555] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.129652] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.129662] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.129668] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.130737] ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70R, max UDMA/100
[ 1.130746] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.131988] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.131998] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.132004] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.133048] ata1.00: configured for UDMA/100
[ 1.133458] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72323 EC2Z PQ: 0 ANSI: 5
[ 1.133812] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.133814] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.133867] sd 0:0:0:0: [sda] Write Protect is off
[ 1.133874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.133919] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.136506] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.167668] sda: sda1 sda2
[ 1.168349] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.250860] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.250870] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.251304] hub 1-1:1.0: USB hub found
[ 1.251561] hub 1-1:1.0: 6 ports detected
[ 1.354464] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.438405] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.441653] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.442466] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.442476] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.444162] ata2.00: ATAPI: MATSHITADVD-RAM UJ8B2, SB01, max UDMA/100
[ 1.447327] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.448151] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.448160] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.449844] ata2.00: configured for UDMA/100
[ 1.452142] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B2 SB01 PQ: 0 ANSI: 5
[ 1.454241] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.454250] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.454606] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.454853] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.469087] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.469097] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.469659] hub 2-1:1.0: USB hub found
[ 1.469818] hub 2-1:1.0: 8 ports detected
[ 1.533578] usb 1-1.4: new full-speed USB device number 3 using ehci_hcd
[ 1.623080] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 1.623091] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.623096] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 1.623100] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.623104] usb 1-1.4: SerialNumber: 7CE9D3BE889B
[ 1.697559] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
[ 1.709279] Refined TSC clocksource calibration: 2591.581 MHz.
[ 1.709291] Switching to clocksource tsc
[ 1.713760] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000
[ 1.713779] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.760340] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.764968] Freeing unused kernel memory: 1016k freed
[ 1.765357] Write protecting the kernel read-only data: 12288k
[ 1.768978] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 1.780615] Freeing unused kernel memory: 1944k freed
[ 1.782742] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a
[ 1.782752] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.783260] hub 1-1.5:1.0: USB hub found
[ 1.783407] hub 1-1.5:1.0: 6 ports detected
[ 1.792138] Freeing unused kernel memory: 1468k freed
[ 1.857263] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
[ 1.892884] dracut: dracut-018-98.git20120813.fc17
[ 1.949795] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
[ 1.949807] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.949815] usb 1-1.6: Product: Integrated Camera
[ 1.949821] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 1.954960] dracut: rd.luks=0: removing cryptoluks activation
[ 2.000582] Loading iSCSI transport class v2.0-870.
[ 2.003628] iscsi: registered transport (qla4xxx)
[ 2.003662] QLogic iSCSI HBA Driver
[ 2.008431] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
[ 2.008439] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
[ 2.011069] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
[ 2.011132] iscsi: registered transport (cxgb3i)
[ 2.016608] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
[ 2.016653] iscsi: registered transport (cxgb4i)
[ 2.021237] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
[ 2.022356] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
[ 2.022400] iscsi: registered transport (bnx2i)
[ 2.026869] iscsi: registered transport (be2iscsi)
[ 2.057340] usb 1-1.5.4: new low-speed USB device number 6 using ehci_hcd
[ 2.116122] RPC: Registered named UNIX socket transport module.
[ 2.116129] RPC: Registered udp transport module.
[ 2.116132] RPC: Registered tcp transport module.
[ 2.116134] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.148223] usb 1-1.5.4: New USB device found, idVendor=046d, idProduct=c069
[ 2.148232] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.148237] usb 1-1.5.4: Product: USB Laser Mouse
[ 2.148241] usb 1-1.5.4: Manufacturer: Logitech
[ 2.153685] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input5
[ 2.153757] hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1.5.4/input0
[ 2.191921] udevd[188]: starting version 182
[ 2.237973] [drm] Initialized drm 1.1.0 20060810
[ 2.240749] i915 0000:00:02.0: power state changed by ACPI to D0
[ 2.240754] i915 0000:00:02.0: power state changed by ACPI to D0
[ 2.241589] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 2.241591] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.241606] Console: switching to colour dummy device 80x25
[ 2.241688] i915 0000:00:02.0: setting latency timer to 64
[ 2.304371] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 2.304378] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.304378] [drm] Driver supports precise vblank timestamp query.
[ 2.304407] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.335299] usb 1-1.5.2: new low-speed USB device number 7 using ehci_hcd
[ 2.433879] usb 1-1.5.2: New USB device found, idVendor=046a, idProduct=0011
[ 2.433889] usb 1-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.445050] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input6
[ 2.445337] hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:1a.0-1.5.2/input0
[ 2.494674] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.743372] fbcon: inteldrmfb (fb0) is primary device
[ 3.061118] Console: switching to colour frame buffer device 200x56
[ 3.070490] fb0: inteldrmfb frame buffer device
[ 3.070491] drm: registered panic notifier
[ 3.080270] acpi device:01: registered as cooling_device4
[ 3.080561] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 3.080670] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.080937] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.089908] dracut: Starting plymouth daemon
[ 3.526176] dracut: rd.dm=0: removing DM RAID activation
[ 3.548452] dracut: rd.md=0: removing MD RAID activation
[ 3.621299] wmi: Mapper loaded
[ 3.624054] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[ 3.624056] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[ 3.624093] e1000e 0000:00:19.0: setting latency timer to 64
[ 3.624146] e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.624176] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 3.628695] sdhci: Secure Digital Host Controller Interface driver
[ 3.628698] sdhci: Copyright(c) Pierre Ossman
[ 3.628907] sdhci-pci 0000:05:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 3.629116] Registered led device: mmc0::
[ 3.651618] mmc0: SDHCI controller on PCI [0000:05:00.0] using DMA
[ 3.809100] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:fb:31:0e
[ 3.809110] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.809179] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 3.953273] dracut: Scanning devices sda2 for LVM logical volumes vg_luke/lv_root vg_luke/lv_swap
[ 3.968825] dracut: inactive '/dev/vg_luke/lv_swap' [9.75 GiB] inherit
[ 3.969126] dracut: inactive '/dev/vg_luke/lv_home' [237.84 GiB] inherit
[ 3.969387] dracut: inactive '/dev/vg_luke/lv_root' [50.00 GiB] inherit
[ 4.375409] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.502115] dracut: Checking ext4: /dev/mapper/vg_luke-lv_root
[ 4.502578] dracut: issuing e2fsck -a /dev/mapper/vg_luke-lv_root
[ 4.544455] dracut: /dev/mapper/vg_luke-lv_root: clean, 282963/3276800 files, 3364376/13107200 blocks
[ 4.545603] dracut: Remounting /dev/mapper/vg_luke-lv_root with -o ro
[ 4.588887] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.636514] dracut: Mounted root filesystem /dev/mapper/vg_luke-lv_root
[ 5.065085] dracut: Switching root
[ 5.694319] type=1404 audit(1345218919.335:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 5.846862] SELinux: 2048 avtab hash slots, 101734 rules.
[ 5.862931] SELinux: 2048 avtab hash slots, 101734 rules.
[ 5.984789] SELinux: 9 users, 15 roles, 4174 types, 227 bools, 1 sens, 1024 cats
[ 5.984793] SELinux: 83 classes, 101734 rules
[ 5.986993] SELinux: Permission wake_alarm in class capability2 not defined in policy.
[ 5.986995] SELinux: Permission block_suspend in class capability2 not defined in policy.
[ 5.986997] SELinux: the above unknown classes and permissions will be allowed
[ 5.987000] SELinux: Completing initialization.
[ 5.987000] SELinux: Setting up existing superblocks.
[ 5.987004] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 5.987007] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 5.987015] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 5.987017] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 5.987023] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.987040] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 5.987359] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 5.987362] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 5.987784] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 5.987789] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 5.987791] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 5.987802] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 5.987805] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 5.987809] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 5.987817] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 5.988083] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.988086] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 5.988104] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 5.988112] SELinux: initialized (dev dm-1, type ext4), uses xattr
[ 5.988224] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 6.015883] type=1403 audit(1345218919.657:3): policy loaded auid=4294967295 ses=4294967295
[ 6.046656] systemd[1]: Successfully loaded SELinux policy in 370ms 212us.
[ 6.143937] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6.152957] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.197487] systemd[1]: Relabelled /dev and /run in 44ms 209us.
[ 6.233971] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.241944] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.250947] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.257889] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.265856] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.273856] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.281970] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.289849] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 6.290054] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 6.307941] systemd[1]: Set hostname to <luke>.
[ 7.410635] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 8.308914] systemd-journald[424]: Fixed max_use=393.4M max_size=49.1M min_size=64.0K keep_free=196.7M
[ 8.342800] systemd-journald[424]: Vacuuming...
[ 8.427706] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.685044] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8
[ 8.948965] udevd[427]: starting version 182
[ 10.765112] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 10.780896] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.781174] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 10.788556] EXT4-fs (dm-1): re-mounted. Opts: (null)
[ 11.170386] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 11.172542] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 11.172801] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
[ 11.298082] tun: Universal TUN/TAP device driver, 1.6
[ 11.298090] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 12.080798] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 12.083818] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 12.083820] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 12.083821] thinkpad_acpi: ThinkPad BIOS 8CET51WW (1.31 ), EC unknown
[ 12.083822] thinkpad_acpi: Lenovo ThinkPad T420s, model 4174BH4
[ 12.084273] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 12.084398] thinkpad_acpi: radio switch found; radios are enabled
[ 12.084415] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 12.084416] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 12.088417] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 12.089599] Registered led device: tpacpi::thinklight
[ 12.089633] Registered led device: tpacpi::power
[ 12.089666] Registered led device: tpacpi::standby
[ 12.089682] Registered led device: tpacpi::thinkvantage
[ 12.089689] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 12.090171] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 12.091223] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 12.094411] mei 0000:00:16.0: setting latency timer to 64
[ 12.094481] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 12.099885] cfg80211: Calling CRDA to update world regulatory domain
[ 12.103849] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 12.103851] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[ 12.103927] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 12.103928] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005830000
[ 12.103929] iwlwifi 0000:03:00.0: HW Revision ID = 0x3E
[ 12.104016] iwlwifi 0000:03:00.0: irq 51 for MSI/MSI-X
[ 12.107866] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[ 12.117964] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[ 12.156319] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 12.194077] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[ 12.194106] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[ 12.196067] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[ 12.196083] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[ 12.197395] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
[ 12.197403] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[ 12.198549] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
[ 12.198581] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 12.294497] Bluetooth: Core ver 2.16
[ 12.294519] NET: Registered protocol family 31
[ 12.294520] Bluetooth: HCI device and connection manager initialized
[ 12.294739] Bluetooth: HCI socket layer initialized
[ 12.294774] Bluetooth: L2CAP socket layer initialized
[ 12.294826] Bluetooth: SCO socket layer initialized
[ 12.295639] usbcore: registered new interface driver btusb
[ 12.417818] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
[ 12.418025] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 12.418027] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 12.418029] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 12.418030] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 12.418032] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 12.418034] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 12.418081] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 12.418253] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
[ 12.427199] iwlwifi 0000:03:00.0: device EEPROM VER=0x43a, CALIB=0x6
[ 12.427201] iwlwifi 0000:03:00.0: Device SKU: 0x1F0
[ 12.427202] iwlwifi 0000:03:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7
[ 12.427217] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 12.427287] Registered led device: phy0-led
[ 12.430227] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 12.670421] hda_codec: CX20590: BIOS auto-probing.
[ 12.670430] ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 12.670432] ALSA sound/pci/hda/hda_auto_parser.c:326 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.670434] ALSA sound/pci/hda/hda_auto_parser.c:330 hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 12.670435] ALSA sound/pci/hda/hda_auto_parser.c:331 mono: mono_out=0x0
[ 12.670436] ALSA sound/pci/hda/hda_auto_parser.c:335 inputs:
[ 12.670438] ALSA sound/pci/hda/hda_auto_parser.c:339 Mic=0x1bALSA sound/pci/hda/hda_auto_parser.c:339 Internal Mic=0x23
[ 12.670441] ALSA sound/pci/hda/hda_auto_parser.c:341
[ 12.671242] ALSA sound/pci/hda/patch_conexant.c:4554 hda_codec: Enable sync_write for stable communication
[ 12.679025] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.679115] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.679167] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.679218] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.679268] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.679615] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251)
[ 12.679620] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.679622] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 12.679624] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251)
[ 12.679627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.679630] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120320/utaddress-251)
[ 12.679633] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.679634] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.929387] Linux media interface: v0.10
[ 12.930213] Linux video capture interface: v2.00
[ 12.931071] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
[ 12.935076] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15
[ 12.935148] usbcore: registered new interface driver uvcvideo
[ 12.935149] USB Video Class driver (1.1.1)
[ 15.080465] cfg80211: World regulatory domain updated:
[ 15.080472] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.080476] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.080479] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.080482] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.080484] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.080486] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.080507] cfg80211: Calling CRDA for country: CZ
[ 15.115368] cfg80211: Regulatory domain changed to country: CZ
[ 15.115376] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.115381] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 15.115384] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm)
[ 15.115387] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 15.115390] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 15.453960] Adding 10223612k swap on /dev/mapper/vg_luke-lv_swap. Priority:0 extents:1 across:10223612k
[ 22.151408] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.278360] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 25.128602] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 25.128610] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 26.739255] hdaps: supported laptop not found!
[ 26.739260] hdaps: driver init failed (ret=-19)!
[ 26.853961] iscsi: registered transport (tcp)
[ 26.861825] iscsi: registered transport (iser)
[ 27.991378] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.991380] Bluetooth: BNEP filters: protocol multicast
[ 28.038680] Bluetooth: RFCOMM TTY layer initialized
[ 28.038684] Bluetooth: RFCOMM socket layer initialized
[ 28.038685] Bluetooth: RFCOMM ver 1.11
[ 29.646936] Bridge firewalling registered
[ 29.670670] device virbr0-nic entered promiscuous mode
[ 29.820447] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 29.921298] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[ 29.921895] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[ 29.925866] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 29.926058] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 29.952341] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 29.971340] NFSD: starting 90-second grace period
[ 30.161515] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 30.161707] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
[ 30.270543] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.468514] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 30.546457] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 30.984588] Ebtables v2.0 registered
[ 31.001183] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 33.334444] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 33.334487] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 33.382882] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 33.382936] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 33.594764] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 33.595261] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
[ 83.983871] fuse init (API version 7.19)
[ 84.000533] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 84.007840] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 133.613122] SELinux: initialized (dev proc, type proc), uses genfs_contexts
^ permalink raw reply [flat|nested] 16+ messages in thread