* [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case
2012-08-27 12:31 [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes Vaibhav Hiremath
@ 2012-08-27 12:31 ` Vaibhav Hiremath
2012-08-27 12:31 ` [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes Vaibhav Hiremath
2012-09-06 13:57 ` [PATCH 0/2] arm/dts: AM33XX: Add " Benoit Cousson
2 siblings, 0 replies; 4+ messages in thread
From: Vaibhav Hiremath @ 2012-08-27 12:31 UTC (permalink / raw)
To: linux-omap
Cc: linux-arm-kernel, devicetree-discuss, linux-kernel,
Vaibhav Hiremath, Tony Lindgren
To make it consistent, convert all hex number presentation
to lower-case from all am33xx specific nodes.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/am335x-bone.dts | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 2 +-
arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++----------
3 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a7906cb..c64f7fa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5dd8a6b..8963f20 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -19,7 +19,7 @@
};
ocp {
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index dde76f7..be43511 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -71,7 +71,7 @@
#interrupt-cells = <1>;
};
- gpio2: gpio@4804C000 {
+ gpio2: gpio@4804c000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio2";
gpio-controller;
@@ -80,7 +80,7 @@
#interrupt-cells = <1>;
};
- gpio3: gpio@481AC000 {
+ gpio3: gpio@481ac000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio3";
gpio-controller;
@@ -89,7 +89,7 @@
#interrupt-cells = <1>;
};
- gpio4: gpio@481AE000 {
+ gpio4: gpio@481ae000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
gpio-controller;
@@ -98,7 +98,7 @@
#interrupt-cells = <1>;
};
- uart1: serial@44E09000 {
+ uart1: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
@@ -119,28 +119,28 @@
status = "disabled";
};
- uart4: serial@481A6000 {
+ uart4: serial@481a6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
};
- uart5: serial@481A8000 {
+ uart5: serial@481a8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
};
- uart6: serial@481AA000 {
+ uart6: serial@481aa000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
};
- i2c1: i2c@44E0B000 {
+ i2c1: i2c@44e0b000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -148,7 +148,7 @@
status = "disabled";
};
- i2c2: i2c@4802A000 {
+ i2c2: i2c@4802a000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,7 +156,7 @@
status = "disabled";
};
- i2c3: i2c@4819C000 {
+ i2c3: i2c@4819c000 {
compatible = "ti,omap4-i2c";
#address-cells = <1>;
#size-cells = <0>;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes
2012-08-27 12:31 [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes Vaibhav Hiremath
2012-08-27 12:31 ` [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case Vaibhav Hiremath
@ 2012-08-27 12:31 ` Vaibhav Hiremath
2012-09-06 13:57 ` [PATCH 0/2] arm/dts: AM33XX: Add " Benoit Cousson
2 siblings, 0 replies; 4+ messages in thread
From: Vaibhav Hiremath @ 2012-08-27 12:31 UTC (permalink / raw)
To: linux-omap
Cc: linux-arm-kernel, devicetree-discuss, linux-kernel,
Vaibhav Hiremath, Tony Lindgren, Benoit Cousson
The device/node resources (like, IORESOURCE_MEM and IORESOURCE_IRQ)
are overwritten by hwmod resources, due to all known reasons but
that should not be the reason for not providing all the information
in the DTS blob. Ideally we should use DTS resource and use HWMOD
framework wherever required and for only specific things.
Newer platforms like, OMAP5 and AM33XX, we only support DT boot mode,
so this patch is preparation for the future where we supposed to get
rid of hwmod dependency anyway.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benoit Cousson <b-cousson@ti.com>
---
arch/arm/boot/dts/am33xx.dtsi | 42 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index be43511..f0642e1 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -69,6 +69,9 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x44e07000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <96>;
};
gpio2: gpio@4804c000 {
@@ -78,6 +81,9 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x4804c000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <98>;
};
gpio3: gpio@481ac000 {
@@ -87,6 +93,9 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x481ac000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
};
gpio4: gpio@481ae000 {
@@ -96,12 +105,18 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
+ reg = <0x481ae000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <62>;
};
uart1: serial@44e09000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
+ reg = <0x44e09000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <72>;
status = "disabled";
};
@@ -109,6 +124,9 @@
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
+ reg = <0x48022000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <73>;
status = "disabled";
};
@@ -116,6 +134,9 @@
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
+ reg = <0x48024000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <74>;
status = "disabled";
};
@@ -123,6 +144,9 @@
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
+ reg = <0x481a6000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <44>;
status = "disabled";
};
@@ -130,6 +154,9 @@
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
+ reg = <0x481a8000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <45>;
status = "disabled";
};
@@ -137,6 +164,9 @@
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
+ reg = <0x481aa000 0x2000>;
+ interrupt-parent = <&intc>;
+ interrupts = <46>;
status = "disabled";
};
@@ -145,6 +175,9 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
+ reg = <0x44e0b000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <70>;
status = "disabled";
};
@@ -153,6 +186,9 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
+ reg = <0x4802a000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <71>;
status = "disabled";
};
@@ -161,12 +197,18 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
+ reg = <0x4819c000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
status = "disabled";
};
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
+ reg = <0x44e35000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <91>;
};
};
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes
2012-08-27 12:31 [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes Vaibhav Hiremath
2012-08-27 12:31 ` [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case Vaibhav Hiremath
2012-08-27 12:31 ` [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes Vaibhav Hiremath
@ 2012-09-06 13:57 ` Benoit Cousson
2 siblings, 0 replies; 4+ messages in thread
From: Benoit Cousson @ 2012-09-06 13:57 UTC (permalink / raw)
To: Vaibhav Hiremath
Cc: linux-omap, devicetree-discuss, linux-kernel, linux-arm-kernel
Hi Vaihbav,
On 08/27/2012 02:31 PM, Vaibhav Hiremath wrote:
> This series is trivial patch-series and should be considered as
> preparation for the future where we supposed to get rid of
> hwmod dependency.
>
> 1/2: Converts all hex numbers to lowercase, fixing inconsistency
> 2/2: Add reg and interrupt property to all device/module nodes inside
> DTS files.
>
> Although currently hwmod overwrites resources, I have validated this
> patch series by changing the omap_device layer to respect DT resources
> and boot Tested on BeagleBone platform.
> I will be submitting the changes for omap_device layer as well, still
> needs to fix on certain things.
>
> Vaibhav Hiremath (2):
> arm/dts: AM33XX: Convert all hex numbers to lower-case
> arm/dts: AM33XX: Specify reg and interrupt property for all nodes
>
> arch/arm/boot/dts/am335x-bone.dts | 2 +-
> arch/arm/boot/dts/am335x-evm.dts | 2 +-
> arch/arm/boot/dts/am33xx.dtsi | 62 +++++++++++++++++++++++++++++++------
> 3 files changed, 54 insertions(+), 12 deletions(-)
I'll queue that along with the other DT stuff for 3.7.
Thanks,
Benoit
^ permalink raw reply [flat|nested] 4+ messages in thread