From: Colin Guthrie <gmane@colin.guthr.ie>
To: Andreas Mohr <andi@lisas.de>
Cc: initramfs@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [REGRESSION] [nailed] USB boot failure: USB: EHCI: make ehci-pci a separate driver
Date: Wed, 13 Feb 2013 16:26:27 +0000 [thread overview]
Message-ID: <511BBEB3.3070607@colin.guthr.ie> (raw)
In-Reply-To: <20130213161353.GA17177@rhlx01.hs-esslingen.de>
'Twas brillig, and Andreas Mohr at 13/02/13 16:13 did gyre and gimble:
> [not sure about CCs - I readded both initramfs-tools and lkml]
Sorry about CC's I read mail via gmane's NNTP interface and it mangles
the address for the initramfs list which makes it a pain to reply-all
properly. If someone who manages this stuff could ask a gmane.org admin
to lift the mangling that would be good. There are other places to
harvest the same email addresses if someone really wants to!
>> Either way I already posted a patch about this a while back:
>
>> See: "[PATCH 6/6] kernel-modules: Add ehci support for kernel 3.8+"
>
> OK, I've seen it, but:
> which file does it touch?? That's a complete mystery to me
> (the initramfs-tools git checkout here does not contain that path).
Oh, oops, my bad sorry. I didn't read your mail properly and didn't see
the initramfs-tools bit. The patch is against dracut, so obviously won't
apply nicely :D
Sorry for the confusion.
Col
--
Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/
Day Job:
Tribalogic Limited http://www.tribalogic.net/
Open Source:
Mageia Contributor http://www.mageia.org/
PulseAudio Hacker http://www.pulseaudio.org/
Trac Hacker http://trac.edgewall.org/
next prev parent reply other threads:[~2013-02-13 16:36 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-08 21:51 Linux v3.8-rc7 Linus Torvalds
2013-02-10 0:14 ` [REGRESSION] -rc7/-rc4+: unable to USB boot - enumeration partially broken (was: Linux v3.8-rc7) Andreas Mohr
2013-02-10 14:05 ` Andreas Mohr
2013-02-12 16:07 ` Andreas Mohr
2013-02-12 16:16 ` Greg KH
2013-02-12 21:25 ` Andreas Mohr
2013-02-13 6:44 ` [REGRESSION] [nailed] USB boot failure: USB: EHCI: make ehci-pci a separate driver Andreas Mohr
2013-02-13 7:16 ` Andreas Mohr
2013-02-13 7:44 ` Andreas Mohr
2013-02-13 10:05 ` Andreas Mohr
2013-02-13 10:50 ` Colin Guthrie
2013-02-13 16:13 ` Andreas Mohr
2013-02-13 16:26 ` Colin Guthrie [this message]
2013-02-13 11:10 ` [-rc7 regression] Block IO/VFS/ext3/timer spinlock lockup? Ingo Molnar
2013-02-13 16:59 ` Linus Torvalds
2013-02-13 23:20 ` Thomas Gleixner
2013-02-14 14:45 ` Ingo Molnar
2013-02-14 14:54 ` Ingo Molnar
2013-02-14 15:08 ` Ingo Molnar
2013-02-14 17:28 ` Thomas Gleixner
2013-02-14 18:22 ` Yinghai Lu
2013-02-15 11:44 ` [-rc7 regression] Buggy commit: "mm: use aligned zone start for pfn_to_bitidx calculation" Ingo Molnar
2013-02-15 22:06 ` Greg KH
2013-02-16 8:29 ` Ingo Molnar
2013-03-01 16:50 ` Greg KH
2013-03-01 17:07 ` Linus Torvalds
2013-03-01 17:14 ` Greg KH
2013-02-16 8:25 ` Ingo Molnar
2013-02-16 18:26 ` Linus Torvalds
2013-02-16 19:38 ` Yinghai Lu
2013-02-16 19:51 ` Linus Torvalds
2013-02-18 8:49 ` Ingo Molnar
2013-02-18 14:46 ` Mel Gorman
2013-02-18 18:42 ` Laura Abbott
2013-02-14 23:05 ` [-rc7 regression] Block IO/VFS/ext3/timer spinlock lockup? Linus Torvalds
2013-02-15 11:39 ` [PATCH] spinlock/debugging: Print out lock name when available Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=511BBEB3.3070607@colin.guthr.ie \
--to=gmane@colin.guthr.ie \
--cc=andi@lisas.de \
--cc=initramfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).