* [GIT PULL] Final round of SCSI updates for the 3.8+ merge window
@ 2013-03-01 9:19 James Bottomley
2013-03-01 16:14 ` Bart Van Assche
0 siblings, 1 reply; 2+ messages in thread
From: James Bottomley @ 2013-03-01 9:19 UTC (permalink / raw)
To: Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-kernel
This is an assorted set of stragglers into the merge window with driver
updates for qla2xxx, megaraid_sas, storvsc and ufs. It also includes
pulls of the uapi tree (all the remaining SCSI pieces) and the fcoe tree
(updates to fcoe and libfc)
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-for-linus
The short changelog is:
Adam Radford (3):
megaraid_sas: Version and Changelog update
megaraid_sas: Dont load DevHandle unless FastPath enabled
megaraid_sas: Add 4k FastPath DIF support
Al Viro (1):
debris left by " libfcoe: Remove mutex_trylock/restart_syscall checks"
Andrew Vasquez (2):
qla2xxx: Correct list-iteration bug in Report-ID Acquisition codes.
qla2xxx: Correct race in loop_state assignment during reset handling.
Arun Easi (3):
qla2xxx: Prevent enabling target mode for unsupported HBAs.
qla2xxx: Allow ISP81xx to create ATIO queues.
qla2xxx: Enable target mode support for ISP83xx.
Bhanu Prakash Gollapudi (2):
libfcoe: Check for unusable FCFs before looking for conflicting FCFs
libfcoe: Handle CVL while waiting to select an FCF
Brian King (1):
ipr: Fix oops while resetting an ipr adapter
Chad Dupuis (8):
qla2xxx: Wait for IDC complete event to finish loopback operation.
qla2xxx: Don't process RSCNs for a vport on the same physical adapter.
qla2xxx: Move loopback mode reset after chip reset check.
qla2xxx: Extra loopback error handling for ISP83xx.
qla2xxx: Unload hangs after issuing BSG commands to vport.
qla2xxx: Reject loopback request if one is already in progress.
qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low.
qla2xxx: Determine the number of outstanding commands based on available resources.
Dan Carpenter (3):
dc395x: uninitialized variable in device_alloc()
libosd: check for kzalloc() failure
qla4xxx: don't free NULL dma pool
David Howells (2):
UAPI: (Scripted) Disintegrate include/scsi/fc
UAPI: (Scripted) Disintegrate include/scsi
Giridhar Malavali (1):
qla2xxx: Update the FTP site references in the driver sources.
Hiral Patel (5):
fnic: Fnic Trace Utility
fnic: New debug flags and debug log messages
fnic: fnic driver may hit BUG_ON on device reset
fnic: Fix SGEs limit
fnic: fixing issues in device and firmware reset code
Joe Carnuccio (7):
qla2xxx: Integrate generic card temperature with mezz card temperature.
qla2xxx: Add setting of driver version string for vendor application.
qla2xxx: Correction of comment in MBC opcode defines.
Revert "[SCSI] qla2xxx: Optimize existing port name server query matching."
Revert "[SCSI] qla2xxx: Avoid losing any fc ports when loop id's are exhausted."
qla2xxx: Do link initialization on get loop id failure.
qla2xxx: Print thermal unsupported message.
K. Y. Srinivasan (3):
storvsc: Handle dynamic resizing of the device
storvsc: Restructure error handling code on command completion
storvsc: Initialize the sglist
Krishna Mohan (1):
libfc: XenServer fails to mount root filesystem.
Martin K. Petersen (1):
Fix range check in scsi_host_dif_capable()
Masanari Iida (1):
qla2xxx: Avoid null pointer dereference in shutdown routine.
Neerav Parikh (1):
fcoe: Fix deadlock while deleting FCoE interface with NPIV ports
Neil Horman (1):
fcoe: close race on link speed detection in fcoe code
Olaf Hering (1):
storvsc: avoid usage of WRITE_SAME
Paul Bolle (2):
aacraid: suppress two GCC warnings
qla2xxx: silence two GCC warnings.
Randy Dunlap (1):
scsi: fix lpfc build when wmb() is defined as mb()
Robert Love (7):
libfc, libfcoe, fcoe: Convert debug_logging macros to pr_info
bnx2fc: Use the fcoe_sysfs control interface
fcoe: Use the fcoe_sysfs control interface
libfcoe, fcoe, bnx2fc: Add new fcoe control interface
libfcoe: Add fcoe_sysfs debug logging level
libfcoe: Save some memory and optimize name lookups
Documentation: Add missing devices/ to devices path
Sakthivel K (1):
pm80xx: fix for memory region free
Saurav Kashyap (6):
qla2xxx: Don't process state change aen for reset owner.
qla2xxx: Update the copyright information.
qla2xxx: Display the lock owner on lock acquire failure.
qla2xxx: Do MPI reset only for ISP81xx.
qla2xxx: Get VPD information from common location for CNA.
qla2xxx: Correction to the message ids.
Shuah Khan (1):
hpsa: Check for dma_mapping_error in hpsa_map_one
Sreekanth Reddy (1):
mpt2sas: Add support for OEM specific controller
Stephen M. Cameron (4):
hpsa: check for dma_mapping_error in hpsa_passthru ioctls
hpsa: reorganize error handling in hpsa_passthru_ioctl
hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block
hpsa: Check for dma_mapping_error for all code paths using fill_cmd
Vasu Dev (1):
libfc: fix REC handling
Vinayak Holikatti (2):
ufs: Separate PCI code into glue driver
ufs: Segregate PCI Specific Code
Xiangliang Yu (1):
mvsas: fixed timeout issue when removing module
Yi Zou (7):
bnx2fc: use fcoe_get_lesb/fcoe_ctlr_get_lesb() directly from libfcoe
bnx2fc: use fcoe_link_speed_update() from the exported symbol in libfcoe
bnx2fc: add support to get_netdev for bnx2f_interface
libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesb
libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export it
fcoe: add support to the get_netdev() for fcoe_interface
fcoe: prep work to start consolidate the usage of fcoe_netdev
And the diffstat:
Documentation/ABI/testing/sysfs-bus-fcoe | 45 +-
Documentation/scsi/ChangeLog.megaraid_sas | 9 +
drivers/scsi/aacraid/src.c | 4 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 256 +++++-----
drivers/scsi/dc395x.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 266 ++++++----
drivers/scsi/fcoe/fcoe.h | 6 +-
drivers/scsi/fcoe/fcoe_ctlr.c | 45 +-
drivers/scsi/fcoe/fcoe_sysfs.c | 186 +++++--
drivers/scsi/fcoe/fcoe_transport.c | 199 +++++++-
drivers/scsi/fcoe/libfcoe.h | 20 +-
drivers/scsi/fnic/Makefile | 2 +
drivers/scsi/fnic/fnic.h | 60 +++
drivers/scsi/fnic/fnic_debugfs.c | 314 ++++++++++++
drivers/scsi/fnic/fnic_io.h | 6 +-
drivers/scsi/fnic/fnic_main.c | 17 +
drivers/scsi/fnic/fnic_scsi.c | 721 ++++++++++++++++++++++++++--
drivers/scsi/fnic/fnic_trace.c | 273 +++++++++++
drivers/scsi/fnic/fnic_trace.h | 90 ++++
drivers/scsi/hpsa.c | 117 +++--
drivers/scsi/ipr.c | 33 +-
drivers/scsi/ipr.h | 1 +
drivers/scsi/libfc/fc_fcp.c | 6 +-
drivers/scsi/libfc/fc_libfc.h | 38 +-
drivers/scsi/libfc/fc_rport.c | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 56 +--
drivers/scsi/megaraid/megaraid_sas.h | 6 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 5 +-
drivers/scsi/megaraid/megaraid_sas_fusion.h | 1 -
drivers/scsi/mpt2sas/mpt2sas_base.c | 8 +
drivers/scsi/mpt2sas/mpt2sas_base.h | 6 +
drivers/scsi/mvsas/mv_sas.c | 10 +-
drivers/scsi/mvsas/mv_sas.h | 1 +
drivers/scsi/osd/osd_initiator.c | 4 +
drivers/scsi/pm8001/pm8001_init.c | 3 +-
drivers/scsi/qla2xxx/qla_attr.c | 35 +-
drivers/scsi/qla2xxx/qla_bsg.c | 199 +++++---
drivers/scsi/qla2xxx/qla_bsg.h | 2 +-
drivers/scsi/qla2xxx/qla_dbg.c | 17 +-
drivers/scsi/qla2xxx/qla_dbg.h | 2 +-
drivers/scsi/qla2xxx/qla_def.h | 54 ++-
drivers/scsi/qla2xxx/qla_dfs.c | 2 +-
drivers/scsi/qla2xxx/qla_fw.h | 7 +-
drivers/scsi/qla2xxx/qla_gbl.h | 15 +-
drivers/scsi/qla2xxx/qla_gs.c | 10 +-
drivers/scsi/qla2xxx/qla_init.c | 200 ++++++--
drivers/scsi/qla2xxx/qla_inline.h | 28 +-
drivers/scsi/qla2xxx/qla_iocb.c | 39 +-
drivers/scsi/qla2xxx/qla_isr.c | 82 +++-
drivers/scsi/qla2xxx/qla_mbx.c | 207 ++++++--
drivers/scsi/qla2xxx/qla_mid.c | 9 +-
drivers/scsi/qla2xxx/qla_nx.c | 13 +-
drivers/scsi/qla2xxx/qla_nx.h | 4 +-
drivers/scsi/qla2xxx/qla_os.c | 147 +++++-
drivers/scsi/qla2xxx/qla_settings.h | 2 +-
drivers/scsi/qla2xxx/qla_sup.c | 18 +-
drivers/scsi/qla2xxx/qla_target.c | 169 ++++++-
drivers/scsi/qla2xxx/qla_target.h | 19 +-
drivers/scsi/qla2xxx/qla_version.h | 2 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 6 +-
drivers/scsi/storvsc_drv.c | 137 ++++--
drivers/scsi/ufs/Kconfig | 74 +--
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs.h | 44 +-
drivers/scsi/ufs/ufshcd-pci.c | 211 ++++++++
drivers/scsi/ufs/ufshcd.c | 423 ++++------------
drivers/scsi/ufs/ufshcd.h | 202 ++++++++
drivers/scsi/ufs/ufshci.h | 44 +-
include/scsi/Kbuild | 3 -
include/scsi/fc/Kbuild | 4 -
include/scsi/fcoe_sysfs.h | 11 +-
include/scsi/libfcoe.h | 32 +-
include/scsi/scsi_host.h | 4 +-
include/uapi/scsi/Kbuild | 3 +
include/uapi/scsi/fc/Kbuild | 4 +
include/{ => uapi}/scsi/fc/fc_els.h | 0
include/{ => uapi}/scsi/fc/fc_fs.h | 0
include/{ => uapi}/scsi/fc/fc_gs.h | 0
include/{ => uapi}/scsi/fc/fc_ns.h | 0
include/{ => uapi}/scsi/scsi_bsg_fc.h | 0
include/{ => uapi}/scsi/scsi_netlink.h | 0
include/{ => uapi}/scsi/scsi_netlink_fc.h | 0
83 files changed, 4100 insertions(+), 1205 deletions(-)
create mode 100644 drivers/scsi/fnic/fnic_debugfs.c
create mode 100644 drivers/scsi/fnic/fnic_trace.c
create mode 100644 drivers/scsi/fnic/fnic_trace.h
create mode 100644 drivers/scsi/ufs/ufshcd-pci.c
create mode 100644 drivers/scsi/ufs/ufshcd.h
rename include/{ => uapi}/scsi/fc/fc_els.h (100%)
rename include/{ => uapi}/scsi/fc/fc_fs.h (100%)
rename include/{ => uapi}/scsi/fc/fc_gs.h (100%)
rename include/{ => uapi}/scsi/fc/fc_ns.h (100%)
rename include/{ => uapi}/scsi/scsi_bsg_fc.h (100%)
rename include/{ => uapi}/scsi/scsi_netlink.h (100%)
rename include/{ => uapi}/scsi/scsi_netlink_fc.h (100%)
James
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] Final round of SCSI updates for the 3.8+ merge window
2013-03-01 9:19 [GIT PULL] Final round of SCSI updates for the 3.8+ merge window James Bottomley
@ 2013-03-01 16:14 ` Bart Van Assche
0 siblings, 0 replies; 2+ messages in thread
From: Bart Van Assche @ 2013-03-01 16:14 UTC (permalink / raw)
To: James Bottomley; +Cc: Andrew Morton, Linus Torvalds, linux-scsi, linux-kernel
On 03/01/13 10:19, James Bottomley wrote:
> This is an assorted set of stragglers into the merge window with driver
> updates for qla2xxx, megaraid_sas, storvsc and ufs. It also includes
> pulls of the uapi tree (all the remaining SCSI pieces) and the fcoe tree
> (updates to fcoe and libfc)
Hello James,
I'm curious to know your opinion about the patch called "Fix race
between starved list processing and device removal"
(http://article.gmane.org/gmane.linux.scsi/80090/match=scsi_run_queue) ?
It was posted for the first time several months ago and has been ack-ed
and tested by other people. So far I haven't seen any comments from you
on that patch.
Bart.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-03-01 16:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-01 9:19 [GIT PULL] Final round of SCSI updates for the 3.8+ merge window James Bottomley
2013-03-01 16:14 ` Bart Van Assche
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).