[PATCH 0/9] ARM: CPUFreq: Move drivers arch/arm/ -> drivers/cpufreq

[PATCH 0/9] ARM: CPUFreq: Move drivers arch/arm/ -> drivers/cpufreq

[Viresh Kumar]

Hi,

This patchset tries to move all CPUFreq drivers for ARM platforms from arch/arm
to drivers/cpufreq directory.

This series is dependent (rebased of) on following patches:

http://www.spinics.net/lists/arm-kernel/msg232540.html
https://lkml.org/lkml/2013/3/24/151

I want this series to go through Rafael's tree due to dependencies and so want
Ack's by respective maintainers.

These are applied here for people looking to test them:

http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-move-drivers

Viresh Kumar (9):
  cpufreq: ARM: Arrange drivers in alphabetical order
  cpufreq: tegra: Move driver to drivers/cpufreq
  cpufreq: davinci: move cpufreq driver to drivers/cpufreq
  cpufreq: imx: move cpufreq driver to drivers/cpufreq
  cpufreq: integrator: move cpufreq driver to drivers/cpufreq
  cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq
  cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq
  cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq
  cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq

 arch/arm/Kconfig                                   |  79 ---------
 arch/arm/mach-davinci/Makefile                     |   1 -
 arch/arm/mach-imx/Makefile                         |   1 -
 arch/arm/mach-imx/mxc.h                            |   6 +-
 arch/arm/mach-integrator/Makefile                  |   1 -
 arch/arm/mach-pxa/Makefile                         |   6 -
 arch/arm/mach-pxa/include/mach/generic.h           |   1 +
 arch/arm/mach-s3c24xx/Kconfig                      |  66 +++----
 arch/arm/mach-s3c24xx/Makefile                     |   6 -
 arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |   0
 arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |   2 +-
 arch/arm/mach-sa1100/Kconfig                       |  26 +--
 arch/arm/mach-sa1100/Makefile                      |   3 -
 arch/arm/mach-sa1100/include/mach/generic.h        |   1 +
 arch/arm/mach-tegra/Makefile                       |   1 -
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h |  10 +-
 arch/arm/plat-samsung/include/plat/cpu-freq.h      |   6 +-
 drivers/cpufreq/Kconfig.arm                        | 191 +++++++++++++++------
 drivers/cpufreq/Makefile                           |  24 ++-
 .../cpufreq.c => drivers/cpufreq/davinci-cpufreq.c |   2 -
 .../cpufreq.c => drivers/cpufreq/imx-cpufreq.c     |   7 +-
 .../cpu.c => drivers/cpufreq/integrator-cpufreq.c  |   2 -
 .../cpufreq/pxa2xx-cpufreq.c                       |   2 -
 .../cpufreq/pxa3xx-cpufreq.c                       |   5 +-
 .../cpufreq/s3c2410-cpufreq.c                      |   0
 .../cpufreq/s3c2412-cpufreq.c                      |   3 +-
 .../cpufreq/s3c2440-cpufreq.c                      |   0
 .../cpufreq/s3c24xx-cpufreq-debugfs.c              |   0
 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |   0
 .../cpufreq/sa1100-cpufreq.c                       |   3 +-
 .../cpufreq/sa1110-cpufreq.c                       |   3 +-
 .../cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c |   2 -
 include/linux/cpufreq/imx.h                        |  10 ++
 33 files changed, 223 insertions(+), 247 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
 rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
 create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
 rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%)
 rename arch/arm/mach-imx/cpufreq.c => drivers/cpufreq/imx-cpufreq.c (99%)
 rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)
 rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%)
 rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
 rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
 rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)
 rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%)
 create mode 100644 include/linux/cpufreq/imx.h

-- 
1.7.12.rc2.18.g61b472e

[PATCH 1/9] cpufreq: ARM: Arrange drivers in alphabetical order

[Viresh Kumar]

Normally we keep drivers in alphabetical inside Kconfig and Makefile and over
time this was broken for ARM cpufreq drivers. Fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/Kconfig.arm | 116 ++++++++++++++++++++++----------------------
 drivers/cpufreq/Makefile    |  10 ++--
 2 files changed, 63 insertions(+), 63 deletions(-)

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 030ddf6..b72a2b3 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,64 @@
 # ARM CPU Frequency scaling drivers
 #
 
+config ARM_EXYNOS_CPUFREQ
+	bool "SAMSUNG EXYNOS SoCs"
+	depends on ARCH_EXYNOS
+	default y
+	help
+	  This adds the CPUFreq driver common part for Samsung
+	  EXYNOS SoCs.
+
+	  If in doubt, say N.
+
+config ARM_EXYNOS4210_CPUFREQ
+	def_bool CPU_EXYNOS4210
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4210
+	  SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4X12
+	  SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+	def_bool SOC_EXYNOS5250
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5250
+	  SoC.
+
+config ARM_HIGHBANK_CPUFREQ
+	tristate "Calxeda Highbank-based"
+	depends on ARCH_HIGHBANK
+	select CPU_FREQ_TABLE
+	select GENERIC_CPUFREQ_CPU0
+	select PM_OPP
+	select REGULATOR
+
+	default m
+	help
+	  This adds the CPUFreq driver for Calxeda Highbank SoC
+	  based boards.
+
+	  If in doubt, say N.
+
+config ARM_IMX6Q_CPUFREQ
+	tristate "Freescale i.MX6Q cpufreq support"
+	depends on SOC_IMX6Q
+	depends on REGULATOR_ANATOP
+	help
+	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
+
+	  If in doubt, say N.
+
+config ARM_KIRKWOOD_CPUFREQ
+	def_bool ARCH_KIRKWOOD && OF
+	help
+	  This adds the CPUFreq driver for Marvell Kirkwood
+	  SoCs.
+
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
 	depends on ARCH_OMAP2PLUS
@@ -49,67 +107,9 @@ config ARM_S5PV210_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_EXYNOS_CPUFREQ
-	bool "SAMSUNG EXYNOS SoCs"
-	depends on ARCH_EXYNOS
-	default y
-	help
-	  This adds the CPUFreq driver common part for Samsung
-	  EXYNOS SoCs.
-
-	  If in doubt, say N.
-
-config ARM_EXYNOS4210_CPUFREQ
-	def_bool CPU_EXYNOS4210
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS4210
-	  SoC (S5PV310 or S5PC210).
-
-config ARM_EXYNOS4X12_CPUFREQ
-	def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS4X12
-	  SoC (EXYNOS4212 or EXYNOS4412).
-
-config ARM_EXYNOS5250_CPUFREQ
-	def_bool SOC_EXYNOS5250
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS5250
-	  SoC.
-
-config ARM_KIRKWOOD_CPUFREQ
-	def_bool ARCH_KIRKWOOD && OF
-	help
-	  This adds the CPUFreq driver for Marvell Kirkwood
-	  SoCs.
-
-config ARM_IMX6Q_CPUFREQ
-	tristate "Freescale i.MX6Q cpufreq support"
-	depends on SOC_IMX6Q
-	depends on REGULATOR_ANATOP
-	help
-	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
-
-	  If in doubt, say N.
-
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR
 	default y
 	help
 	  This adds the CPUFreq driver support for SPEAr SOCs.
-
-config ARM_HIGHBANK_CPUFREQ
-	tristate "Calxeda Highbank-based"
-	depends on ARCH_HIGHBANK
-	select CPU_FREQ_TABLE
-	select GENERIC_CPUFREQ_CPU0
-	select PM_OPP
-	select REGULATOR
-
-	default m
-	help
-	  This adds the CPUFreq driver for Calxeda Highbank SoC
-	  based boards.
-
-	  If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 863fd18..e33a30e 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -45,18 +45,18 @@ obj-$(CONFIG_X86_INTEL_PSTATE)		+= intel_pstate.o
 ##################################################################################
 # ARM SoC drivers
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
-obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
-obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
-obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
+obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
-obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
-obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
-- 
1.7.12.rc2.18.g61b472e

[PATCH 2/9] cpufreq: tegra: Move driver to drivers/cpufreq

[Viresh Kumar]

This patch moves cpufreq driver of ARM based tegra platform to drivers/cpufreq.

Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-tegra/Makefile                                       | 1 -
 drivers/cpufreq/Makefile                                           | 1 +
 arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c | 2 --
 3 files changed, 1 insertion(+), 3 deletions(-)
 rename arch/arm/mach-tegra/cpu-tegra.c => drivers/cpufreq/tegra-cpufreq.c (99%)

diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index f6b46ae..09b578f 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= cpuidle-tegra30.o
 endif
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= board-dt-tegra20.o
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index e33a30e..966ea28 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
+obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 
 ##################################################################################
 # PowerPC platform drivers
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/drivers/cpufreq/tegra-cpufreq.c
similarity index 99%
rename from arch/arm/mach-tegra/cpu-tegra.c
rename to drivers/cpufreq/tegra-cpufreq.c
index 11ca730..c74c0e1 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/drivers/cpufreq/tegra-cpufreq.c
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-tegra/cpu-tegra.c
- *
  * Copyright (C) 2010 Google, Inc.
  *
  * Author:
-- 
1.7.12.rc2.18.g61b472e

[PATCH 3/9] cpufreq: davinci: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

This patch moves cpufreq driver of ARM based davinci platform to
drivers/cpufreq.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: davinci-linux-open-source@linux.davincidsp.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-davinci/Makefile                                       | 1 -
 drivers/cpufreq/Makefile                                             | 1 +
 arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c | 2 --
 3 files changed, 1 insertion(+), 3 deletions(-)
 rename arch/arm/mach-davinci/cpufreq.c => drivers/cpufreq/davinci-cpufreq.c (99%)

diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index fb5c1aa..dd1ffcc 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 966ea28..efce6c7 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_X86_INTEL_PSTATE)		+= intel_pstate.o
 
 ##################################################################################
 # ARM SoC drivers
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
diff --git a/arch/arm/mach-davinci/cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c
similarity index 99%
rename from arch/arm/mach-davinci/cpufreq.c
rename to drivers/cpufreq/davinci-cpufreq.c
index 8fb0c2a..5b34f61 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/drivers/cpufreq/davinci-cpufreq.c
@@ -30,8 +30,6 @@
 #include <mach/cpufreq.h>
 #include <mach/common.h>
 
-#include "clock.h"
-
 struct davinci_cpufreq {
 	struct device *dev;
 	struct clk *armclk;
-- 
1.7.12.rc2.18.g61b472e

[PATCH 4/9] cpufreq: imx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

This patch moves cpufreq driver of ARM based imx platform to drivers/cpufreq.

Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/Kconfig                                             |  7 -------
 arch/arm/mach-imx/Makefile                                   |  1 -
 arch/arm/mach-imx/mxc.h                                      |  6 +-----
 drivers/cpufreq/Kconfig.arm                                  |  7 +++++++
 drivers/cpufreq/Makefile                                     |  1 +
 arch/arm/mach-imx/cpufreq.c => drivers/cpufreq/imx-cpufreq.c |  7 +++----
 include/linux/cpufreq/imx.h                                  | 10 ++++++++++
 7 files changed, 22 insertions(+), 17 deletions(-)
 rename arch/arm/mach-imx/cpufreq.c => drivers/cpufreq/imx-cpufreq.c (99%)
 create mode 100644 include/linux/cpufreq/imx.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c3bdce..0295a08 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2156,13 +2156,6 @@ if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_MXC && CPU_FREQ
-	select CPU_FREQ_TABLE
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
 config CPU_FREQ_SA1100
 	bool
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index c4ce090..e313433 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-y += cpuidle.o
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 7dce17a..ec8d752 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -151,13 +151,9 @@ extern unsigned int __mxc_cpu_type;
 
 #ifndef __ASSEMBLY__
 
-struct cpu_op {
-	u32 cpu_rate;
-};
+#include <linux/cpufreq/imx.h>
 
 int tzic_enable_wake(void);
-
-extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
 
 #define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index b72a2b3..3d83bc5 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -45,6 +45,13 @@ config ARM_HIGHBANK_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_IMX_CPUFREQ
+	tristate "CPUfreq driver for i.MX CPUs"
+	depends on ARCH_MXC
+	select CPU_FREQ_TABLE
+	help
+	  This enables the CPUfreq driver for i.MX CPUs.
+
 config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6Q cpufreq support"
 	depends on SOC_IMX6Q
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index efce6c7..2759192 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
+obj-$(CONFIG_ARM_IMX_CPUFREQ)		+= imx-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
diff --git a/arch/arm/mach-imx/cpufreq.c b/drivers/cpufreq/imx-cpufreq.c
similarity index 99%
rename from arch/arm/mach-imx/cpufreq.c
rename to drivers/cpufreq/imx-cpufreq.c
index cfce5e3..3b856e0 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/drivers/cpufreq/imx-cpufreq.c
@@ -17,14 +17,13 @@
  * the CPU clock speed on the fly.
  */
 
-#include <linux/module.h>
-#include <linux/cpufreq.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/cpufreq/imx.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
-#include "hardware.h"
-
 #define CLK32_FREQ	32768
 #define NANOSECOND	(1000 * 1000 * 1000)
 
diff --git a/include/linux/cpufreq/imx.h b/include/linux/cpufreq/imx.h
new file mode 100644
index 0000000..dd2cc49
--- /dev/null
+++ b/include/linux/cpufreq/imx.h
@@ -0,0 +1,10 @@
+#ifndef CPUFREQ_IMX_H
+#define CPUFREQ_IMX_H
+
+struct cpu_op {
+	u32 cpu_rate;
+};
+
+extern struct cpu_op *(*get_cpu_op)(int *op);
+
+#endif
-- 
1.7.12.rc2.18.g61b472e

[PATCH 5/9] cpufreq: integrator: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

This patch moves cpufreq driver of ARM based integrator platform to
drivers/cpufreq.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/Kconfig                                              | 11 -----------
 arch/arm/mach-integrator/Makefile                             |  1 -
 drivers/cpufreq/Kconfig.arm                                   |  8 ++++++++
 drivers/cpufreq/Makefile                                      |  1 +
 .../cpu.c => drivers/cpufreq/integrator-cpufreq.c             |  2 --
 5 files changed, 9 insertions(+), 14 deletions(-)
 rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0295a08..fbb9587 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2162,17 +2162,6 @@ config CPU_FREQ_SA1100
 config CPU_FREQ_SA1110
 	bool
 
-config CPU_FREQ_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR && CPU_FREQ
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say Y.
-
 config CPU_FREQ_PXA
 	bool
 	depends on CPU_FREQ && ARCH_PXA && PXA25x
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 5521d18..d14d6b7 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
 obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
-obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
 obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 3d83bc5..a345e20 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -61,6 +61,14 @@ config ARM_IMX6Q_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_INTEGRATOR
+	tristate "CPUfreq driver for ARM Integrator CPUs"
+	depends on ARCH_INTEGRATOR
+	default y
+	help
+	  This enables the CPUfreq driver for ARM Integrator CPUs.
+	  If in doubt, say Y.
+
 config ARM_KIRKWOOD_CPUFREQ
 	def_bool ARCH_KIRKWOOD && OF
 	help
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 2759192..170f01a 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX_CPUFREQ)		+= imx-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
+obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
diff --git a/arch/arm/mach-integrator/cpu.c b/drivers/cpufreq/integrator-cpufreq.c
similarity index 99%
rename from arch/arm/mach-integrator/cpu.c
rename to drivers/cpufreq/integrator-cpufreq.c
index df863c3..f7c99df 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/drivers/cpufreq/integrator-cpufreq.c
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-integrator/cpu.c
- *
  *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
-- 
1.7.12.rc2.18.g61b472e

[PATCH 6/9] cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq.

Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-pxa/Makefile                                           | 1 -
 arch/arm/mach-pxa/include/mach/generic.h                             | 1 +
 drivers/cpufreq/Makefile                                             | 1 +
 .../mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c    | 5 +----
 4 files changed, 3 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
 rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)

diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 12c5005..929e700 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 ifeq ($(CONFIG_CPU_FREQ),y)
 obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
 obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
 endif
 
 # Generic drivers that other drivers may depend upon
diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h
new file mode 100644
index 0000000..665542e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 170f01a..c5c276a 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/drivers/cpufreq/pxa3xx-cpufreq.c
similarity index 98%
rename from arch/arm/mach-pxa/cpufreq-pxa3xx.c
rename to drivers/cpufreq/pxa3xx-cpufreq.c
index 8c45b2b..15d60f8 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/drivers/cpufreq/pxa3xx-cpufreq.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
- *
  * Copyright (C) 2008 Marvell International Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,10 +15,9 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 
+#include <mach/generic.h>
 #include <mach/pxa3xx-regs.h>
 
-#include "generic.h"
-
 #define HSS_104M	(0)
 #define HSS_156M	(1)
 #define HSS_208M	(2)
-- 
1.7.12.rc2.18.g61b472e

[PATCH 7/9] cpufreq: pxa2xx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

This patch moves cpufreq driver of ARM based pxa2xx platform to drivers/cpufreq.

Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/Kconfig                                                   | 7 -------
 arch/arm/mach-pxa/Makefile                                         | 5 -----
 drivers/cpufreq/Makefile                                           | 2 ++
 .../mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c  | 2 --
 4 files changed, 2 insertions(+), 14 deletions(-)
 rename arch/arm/mach-pxa/cpufreq-pxa2xx.c => drivers/cpufreq/pxa2xx-cpufreq.c (99%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fbb9587..39c8a3b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2162,13 +2162,6 @@ config CPU_FREQ_SA1100
 config CPU_FREQ_SA1110
 	bool
 
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-	select CPU_FREQ_TABLE
-
 config CPU_FREQ_S3C
 	bool
 	help
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 929e700..648867a 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -7,11 +7,6 @@ obj-y				+= clock.o devices.o generic.o irq.o \
 				   time.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
-endif
-
 # Generic drivers that other drivers may depend upon
 
 # SoC-specific code
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index c5c276a..aa00ca4 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -56,6 +56,8 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
+obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
+obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/drivers/cpufreq/pxa2xx-cpufreq.c
similarity index 99%
rename from arch/arm/mach-pxa/cpufreq-pxa2xx.c
rename to drivers/cpufreq/pxa2xx-cpufreq.c
index f1ca4da..fe4c55b 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
- *
  *  Copyright (C) 2002,2003 Intrinsyc Software
  *
  * This program is free software; you can redistribute it and/or modify
-- 
1.7.12.rc2.18.g61b472e

[PATCH 8/9] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to
drivers/cpufreq.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/Kconfig                                   | 46 ---------------
 arch/arm/mach-s3c24xx/Kconfig                      | 66 +++++++++-------------
 arch/arm/mach-s3c24xx/Makefile                     |  6 --
 arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |  0
 arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |  2 +-
 arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
 arch/arm/plat-samsung/include/plat/cpu-freq.h      |  6 +-
 drivers/cpufreq/Kconfig.arm                        | 58 +++++++++++++++++++
 drivers/cpufreq/Makefile                           |  5 ++
 .../cpufreq/s3c2410-cpufreq.c                      |  0
 .../cpufreq/s3c2412-cpufreq.c                      |  3 +-
 .../cpufreq/s3c2440-cpufreq.c                      |  0
 .../cpufreq/s3c24xx-cpufreq-debugfs.c              |  0
 .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |  0
 14 files changed, 100 insertions(+), 102 deletions(-)
 rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
 rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
 rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 39c8a3b..cdbe688 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2162,52 +2162,6 @@ config CPU_FREQ_SA1100
 config CPU_FREQ_SA1110
 	bool
 
-config CPU_FREQ_S3C
-	bool
-	help
-	  Internal configuration node for common cpufreq on Samsung SoC
-
-config CPU_FREQ_S3C24XX
-	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C24XX && CPU_FREQ
-	select CPU_FREQ_S3C
-	help
-	  This enables the CPUfreq driver for the Samsung S3C24XX family
-	  of CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
-config CPU_FREQ_S3C24XX_PLL
-	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Compile in support for changing the PLL frequency from the
-	  S3C24XX series CPUfreq driver. The PLL takes time to settle
-	  after a frequency change, so by default it is not enabled.
-
-	  This also means that the PLL tables for the selected CPU(s) will
-	  be built which may increase the size of the kernel image.
-
-config CPU_FREQ_S3C24XX_DEBUG
-	bool "Debug CPUfreq Samsung driver core"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_IODEBUG
-	bool "Debug CPUfreq Samsung driver IO timing"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_DEBUGFS
-	bool "Export debugfs for CPUFreq"
-	depends on CPU_FREQ_S3C24XX && DEBUG_FS
-	help
-	  Export status information via debugfs.
-
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 37f513d..81d2f3c 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -28,7 +28,7 @@ config CPU_S3C2410
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_CLOCK
-	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
@@ -202,27 +202,38 @@ config S3C24XX_GPIO_EXTRA128
 	  Add an extra 128 gpio numbers to the available GPIO pool. This is
 	  available for boards that need extra gpios for external devices.
 
+config S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
+	depends on ARM_S3C24XX
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
 # cpu frequency items common between s3c2410 and s3c2440/s3c2442
 
 config S3C2410_IOTIMING
 	bool
-	depends on CPU_FREQ_S3C24XX
+	depends on ARM_S3C24XX_CPUFREQ
 	help
 	  Internal node to select io timing code that is common to the s3c2410
 	  and s3c2440/s3c2442 cpu frequency support.
 
 config S3C2410_CPUFREQ_UTILS
-	bool
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Internal node to select timing code that is common to the s3c2410
-	  and s3c2440/s3c244 cpu frequency support.
+       bool
+       depends on ARM_S3C24XX_CPUFREQ
+       help
+         Internal node to select timing code that is common to the s3c2410
+         and s3c2440/s3c244 cpu frequency support.
 
 # cpu frequency support common to s3c2412, s3c2413 and s3c2442
 
 config S3C2412_IOTIMING
 	bool
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
 	help
 	  Intel node to select io timing code that is common to the s3c2412
 	  and the s3c2443.
@@ -231,16 +242,9 @@ config S3C2412_IOTIMING
 
 if CPU_S3C2410
 
-config S3C2410_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2410
-
 config S3C2410_PLL
 	bool
-	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
 	default y
 	help
 	  Select the PLL table for the S3C2410
@@ -276,7 +280,7 @@ config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select ISA
 	select MACH_BAST_IDE
-	select S3C2410_IOTIMING if S3C2410_CPUFREQ
+	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
 	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
@@ -385,14 +389,6 @@ config CPU_S3C2412_ONLY
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y
 
-config S3C2412_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
-	default y
-	select S3C2412_IOTIMING
-	help
-	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
-
 config S3C2412_DMA
 	bool
 	help
@@ -493,14 +489,6 @@ endif	# CPU_S3C2416
 
 if CPU_S3C2440
 
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	default y
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
 config S3C2440_DMA
 	bool
 	help
@@ -520,15 +508,15 @@ config S3C2440_XTAL_16934400
 
 config S3C2440_PLL_12000000
 	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if CPU_FREQ_S3C24XX_PLL
+	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
 
 config S3C2440_PLL_16934400
 	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if CPU_FREQ_S3C24XX_PLL
+	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
 
@@ -582,7 +570,7 @@ config MACH_NEXCODER_2440
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
 	select S3C24XX_GPIO_EXTRA128
@@ -655,7 +643,7 @@ config MACH_RX1950
 	bool "HP iPAQ rx1950"
 	select I2C
 	select PM_H1940 if PM
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
 	select S3C24XX_DCLK
 	select S3C24XX_PWM
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index af53d27..15ce13c 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -17,13 +17,11 @@ obj-				:=
 obj-y				+= common.o irq.o
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
@@ -34,7 +32,6 @@ obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
@@ -59,9 +56,6 @@ obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
-obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpufreq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
-
 #
 # machine support
 # following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/s3c2412.h
similarity index 100%
rename from arch/arm/mach-s3c24xx/s3c2412.h
rename to arch/arm/mach-s3c24xx/include/mach/s3c2412.h
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 663436d..bd064c0 100644
--- a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -31,7 +31,7 @@
 #include <plat/cpu-freq-core.h>
 #include <plat/clock.h>
 
-#include "s3c2412.h"
+#include <mach/s3c2412.h>
 
 #define print_ns(x) ((x) / 10), ((x) % 10)
 
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 95509d8..d7e1715 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -202,7 +202,7 @@ extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
 extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
 extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS
 #define s3c_cpufreq_debugfs_call(x) x
 #else
 #define s3c_cpufreq_debugfs_call(x) NULL
@@ -259,17 +259,17 @@ extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
 #define s3c2412_iotiming_set NULL
 #endif /* CONFIG_S3C2412_IOTIMING */
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
 #define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */
 
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG
 #define s3c_freq_iodbg(x...) printk(KERN_INFO x)
 #else
 #define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */
 
 static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
 				      int index, size_t table_size,
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
index 80c4a80..85517ab 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -126,7 +126,7 @@ struct s3c_cpufreq_board {
 };
 
 /* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
 #define __init_or_cpufreq
 #else
 #define __init_or_cpufreq __init
@@ -134,7 +134,7 @@ struct s3c_cpufreq_board {
 
 /* Board functions */
 
-#ifdef CONFIG_CPU_FREQ_S3C
+#ifdef CONFIG_ARM_S3C_CPUFREQ
 extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
 #else
 
@@ -142,4 +142,4 @@ static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
 {
 	return 0;
 }
-#endif  /* CONFIG_CPU_FREQ_S3C */
+#endif  /* CONFIG_ARM_S3C_CPUFREQ */
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index a345e20..3021e35 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -81,6 +81,56 @@ config ARM_OMAP2PLUS_CPUFREQ
 	default ARCH_OMAP2PLUS
 	select CPU_FREQ_TABLE
 
+config ARM_S3C_CPUFREQ
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config ARM_S3C24XX_CPUFREQ
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
+	depends on ARCH_S3C24XX
+	select ARM_S3C_CPUFREQ
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config ARM_S3C24XX_CPUFREQ_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
+config ARM_S3C2410_CPUFREQ
+	bool
+	depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
+config ARM_S3C2412_CPUFREQ
+	bool
+	depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
+	default y
+	select S3C2412_IOTIMING
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
 config ARM_S3C2416_CPUFREQ
 	bool "S3C2416 CPU Frequency scaling support"
 	depends on CPU_S3C2416
@@ -103,6 +153,14 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE
 
 	  If in doubt, say N.
 
+config ARM_S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config ARM_S3C64XX_CPUFREQ
 	bool "Samsung S3C64XX"
 	depends on CPU_S3C6410
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index aa00ca4..3886eda 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -59,7 +59,12 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
+obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c b/drivers/cpufreq/s3c2410-cpufreq.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
rename to drivers/cpufreq/s3c2410-cpufreq.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c b/drivers/cpufreq/s3c2412-cpufreq.c
similarity index 99%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
rename to drivers/cpufreq/s3c2412-cpufreq.c
index 8bf0f3a..4645b48 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -25,13 +25,12 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-clock.h>
+#include <mach/s3c2412.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/cpu-freq-core.h>
 
-#include "s3c2412.h"
-
 /* our clock resources. */
 static struct clk *xtal;
 static struct clk *fclk;
diff --git a/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c b/drivers/cpufreq/s3c2440-cpufreq.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
rename to drivers/cpufreq/s3c2440-cpufreq.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq-debugfs.c
rename to drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
similarity index 100%
rename from arch/arm/mach-s3c24xx/cpufreq.c
rename to drivers/cpufreq/s3c24xx-cpufreq.c
-- 
1.7.12.rc2.18.g61b472e

[PATCH 9/9] cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/Kconfig                                   |  8 -------
 arch/arm/mach-sa1100/Kconfig                       | 26 +++++++++++-----------
 arch/arm/mach-sa1100/Makefile                      |  3 ---
 arch/arm/mach-sa1100/include/mach/generic.h        |  1 +
 drivers/cpufreq/Kconfig.arm                        |  6 +++++
 drivers/cpufreq/Makefile                           |  2 ++
 .../cpufreq/sa1100-cpufreq.c                       |  3 +--
 .../cpufreq/sa1110-cpufreq.c                       |  3 +--
 8 files changed, 24 insertions(+), 28 deletions(-)
 create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
 rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
 rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cdbe688..8d73413 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2153,15 +2153,7 @@ endmenu
 menu "CPU Power Management"
 
 if ARCH_HAS_CPUFREQ
-
 source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_SA1100
-	bool
-
-config CPU_FREQ_SA1110
-	bool
-
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index ca14dbd..04f9784 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -4,7 +4,7 @@ menu "SA11x0 Implementations"
 
 config SA1100_ASSABET
 	bool "Assabet"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
 	  Microprocessor Development Board (also known as the Assabet).
@@ -20,7 +20,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
 	  More information is available at:
@@ -47,7 +47,7 @@ endchoice
 
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SHARP_LOCOMO
 	select SHARP_PARAM
 	select SHARP_SCOOP
@@ -56,7 +56,7 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -67,7 +67,7 @@ config SA1100_H3100
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
@@ -78,7 +78,7 @@ config SA1100_H3600
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
@@ -86,7 +86,7 @@ config SA1100_BADGE4
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	# FIXME: select CPU_FREQ_SA11x0
+	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
@@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here to support the HackKit Core CPU Board
 	  <http://hackkit.eletztrick.de>;
 
 config SA1100_LART
 	bool "LART"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
 	  (also known as the LART).  See <http://www.lartmaker.nl/> for
@@ -120,7 +120,7 @@ config SA1100_LART
 
 config SA1100_NANOENGINE
 	bool "nanoEngine"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	select PCI
 	select PCI_NANOENGINE
 	help
@@ -130,7 +130,7 @@ config SA1100_NANOENGINE
 
 config SA1100_PLEB
 	bool "PLEB"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
 	  Embedded Board (also known as PLEB).
@@ -139,7 +139,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
-	select CPU_FREQ_SA1100
+	select ARM_SA1100_CPUFREQ
 	help
 	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
 	  limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -148,7 +148,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
-	select CPU_FREQ_SA1110
+	select ARM_SA1110_CPUFREQ
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
 	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 1aed9e7..2732eef 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -8,9 +8,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
-obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
-
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
diff --git a/arch/arm/mach-sa1100/include/mach/generic.h b/arch/arm/mach-sa1100/include/mach/generic.h
new file mode 100644
index 0000000..665542e
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 3021e35..cdaadcb 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -180,6 +180,12 @@ config ARM_S5PV210_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_SA1100_CPUFREQ
+	bool
+
+config ARM_SA1110_CPUFREQ
+	bool
+
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 3886eda..c113af2 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -67,6 +67,8 @@ obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
+obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
+obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra-cpufreq.o
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/drivers/cpufreq/sa1100-cpufreq.c
similarity index 99%
rename from arch/arm/mach-sa1100/cpu-sa1100.c
rename to drivers/cpufreq/sa1100-cpufreq.c
index 3268761..cff18e8 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/drivers/cpufreq/sa1100-cpufreq.c
@@ -91,10 +91,9 @@
 
 #include <asm/cputype.h>
 
+#include <mach/generic.h>
 #include <mach/hardware.h>
 
-#include "generic.h"
-
 struct sa1100_dram_regs {
 	int speed;
 	u32 mdcnfg;
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/drivers/cpufreq/sa1110-cpufreq.c
similarity index 99%
rename from arch/arm/mach-sa1100/cpu-sa1110.c
rename to drivers/cpufreq/sa1110-cpufreq.c
index 38a7733..39c90b6 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -27,10 +27,9 @@
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
 
+#include <mach/generic.h>
 #include <mach/hardware.h>
 
-#include "generic.h"
-
 #undef DEBUG
 
 struct sdram_params {
-- 
1.7.12.rc2.18.g61b472e

Re: [PATCH 0/9] ARM: CPUFreq: Move drivers arch/arm/ -> drivers/cpufreq

[Viresh Kumar]

On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> This patchset tries to move all CPUFreq drivers for ARM platforms from arch/arm
> to drivers/cpufreq directory.
>
> This series is dependent (rebased of) on following patches:
>
> http://www.spinics.net/lists/arm-kernel/msg232540.html
> https://lkml.org/lkml/2013/3/24/151
>
> I want this series to go through Rafael's tree due to dependencies and so want
> Ack's by respective maintainers.
>
> These are applied here for people looking to test them:
>
> http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-move-drivers

These are compile tested only :)

Re: [PATCH 0/9] ARM: CPUFreq: Move drivers arch/arm/ -> drivers/cpufreq

[Stephen Warren]

On 03/25/2013 04:11 AM, Viresh Kumar wrote:
> Hi,
> 
> This patchset tries to move all CPUFreq drivers for ARM platforms from arch/arm
> to drivers/cpufreq directory.
> 
> This series is dependent (rebased of) on following patches:
> 
> http://www.spinics.net/lists/arm-kernel/msg232540.html
> https://lkml.org/lkml/2013/3/24/151
> 
> I want this series to go through Rafael's tree due to dependencies and so want
> Ack's by respective maintainers.

Patches 1 and 2,

Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>

On Tegra.

Re: [PATCH 3/9] cpufreq: davinci: move cpufreq driver to drivers/cpufreq

[Sekhar Nori]

Hi Viresh,

On 3/25/2013 3:41 PM, Viresh Kumar wrote:
> This patch moves cpufreq driver of ARM based davinci platform to
> drivers/cpufreq.
> 
> Cc: Sekhar Nori <nsekhar@ti.com>
> Cc: davinci-linux-open-source@linux.davincidsp.com
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

I am unable to apply this patch for testing. Looks like this could be
because of:

Content-Type: text/plain; charset="WINDOWS-1252"

Can you get rid of that charset="WINDOWS-1252"?

Thanks,
Sekhar

Re: [PATCH 3/9] cpufreq: davinci: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

On 27 March 2013 15:47, Sekhar Nori <nsekhar@ti.com> wrote:
> On 3/25/2013 3:41 PM, Viresh Kumar wrote:
> I am unable to apply this patch for testing. Looks like this could be
> because of:
>
> Content-Type: text/plain; charset="WINDOWS-1252"
>
> Can you get rid of that charset="WINDOWS-1252"?

I can't, its MSF exchange server behind this.

And for this reason only i push my patches in my public repo all the
time, mentioned in cover-letter.

http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-move-drivers

Re: [PATCH 3/9] cpufreq: davinci: move cpufreq driver to drivers/cpufreq

[Sekhar Nori]

On 3/27/2013 3:51 PM, Viresh Kumar wrote:
> On 27 March 2013 15:47, Sekhar Nori <nsekhar@ti.com> wrote:
>> On 3/25/2013 3:41 PM, Viresh Kumar wrote:
>> I am unable to apply this patch for testing. Looks like this could be
>> because of:
>>
>> Content-Type: text/plain; charset="WINDOWS-1252"
>>
>> Can you get rid of that charset="WINDOWS-1252"?
> 
> I can't, its MSF exchange server behind this.

Too bad. But something needs to be done about it since we all like to
apply patches received in email ;). I have seen reports of people
configuring gmail to know their @company.com address as another e-mail
address they own and then using gmail SMTP to send patches (git config).
You should try that.

> 
> And for this reason only i push my patches in my public repo all the
> time, mentioned in cover-letter.
> 
> http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-move-drivers

Okay but you never copied me on the cover letter so I only saw this one
patch. I will pull your tree and test now.

Thanks,
Sekhar

Re: [PATCH 3/9] cpufreq: davinci: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

On 27 March 2013 16:02, Sekhar Nori <nsekhar@ti.com> wrote:
> Too bad. But something needs to be done about it since we all like to
> apply patches received in email ;). I have seen reports of people
> configuring gmail to know their @company.com address as another e-mail
> address they own and then using gmail SMTP to send patches (git config).
> You should try that.

I don't use ARM's email id for sending mails and linaro id uses gmail servers
only for sending mails..

The problem is, when i am in office, i can' use google servers to send mails
and whatever mail i send from within ARM, they are broken.

I can use linaro servers from outside office without any issues and it is never
broken.

>> And for this reason only i push my patches in my public repo all the
>> time, mentioned in cover-letter.
>>
>> http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-move-drivers
>
> Okay but you never copied me on the cover letter so I only saw this one
> patch. I will pull your tree and test now.

This series was affecting lots of people and so every patch had a number of
people added as cc. I didn't wanted to add everybody in cc of complete
patchset.

BUT, i have another idea now. The way i used to add people in cc for specific
patches (by editing the patch), i will do the same for cover-letter
too next time.

And so all people will receive relevant patches + cover letter.

--
viresh

Re: [PATCH 3/9] cpufreq: davinci: move cpufreq driver to drivers/cpufreq

[Sekhar Nori]

On 3/27/2013 3:51 PM, Viresh Kumar wrote:
> On 27 March 2013 15:47, Sekhar Nori <nsekhar@ti.com> wrote:
>> On 3/25/2013 3:41 PM, Viresh Kumar wrote:
>> I am unable to apply this patch for testing. Looks like this could be
>> because of:
>>
>> Content-Type: text/plain; charset="WINDOWS-1252"
>>
>> Can you get rid of that charset="WINDOWS-1252"?
> 
> I can't, its MSF exchange server behind this.
> 
> And for this reason only i push my patches in my public repo all the
> time, mentioned in cover-letter.
> 
> http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-move-drivers

I pulled your branch and briefly tested it on da850 evm. It doesn't seem
to have broken anything. So you can add:

Acked-by: Sekhar Nori <nsekhar@ti.com>

Thanks,
Sekhar

Re: [PATCH 4/9] cpufreq: imx: move cpufreq driver to drivers/cpufreq

[Markus Pargmann]

Hi,

On Mon, Mar 25, 2013 at 03:41:35PM +0530, Viresh Kumar wrote:
> This patch moves cpufreq driver of ARM based imx platform to drivers/cpufreq.

I sent a patch that removes imx-cpufreq which was applied by Shawn:
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-March/158497.html

Regards,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH 4/9] cpufreq: imx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

On 27 March 2013 20:52, Markus Pargmann <mpa@pengutronix.de> wrote:
> On Mon, Mar 25, 2013 at 03:41:35PM +0530, Viresh Kumar wrote:
>> This patch moves cpufreq driver of ARM based imx platform to drivers/cpufreq.
>
> I sent a patch that removes imx-cpufreq which was applied by Shawn:
> http://lists.infradead.org/pipermail/linux-arm-kernel/2013-March/158497.html

I have seen that Markus and i will drop this patch from my list :)

Re: [PATCH 5/9] cpufreq: integrator: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

Russell,

On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> This patch moves cpufreq driver of ARM based integrator platform to
> drivers/cpufreq.
>
> Cc: Russell King <linux@arm.linux.org.uk>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/Kconfig                                              | 11 -----------
>  arch/arm/mach-integrator/Makefile                             |  1 -
>  drivers/cpufreq/Kconfig.arm                                   |  8 ++++++++
>  drivers/cpufreq/Makefile                                      |  1 +
>  .../cpu.c => drivers/cpufreq/integrator-cpufreq.c             |  2 --
>  5 files changed, 9 insertions(+), 14 deletions(-)
>  rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)

Can i have your Ack or views about this Patch?

Re: [PATCH 6/9] cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

Eric/Haojian,

On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq.
>
> Cc: Eric Miao <eric.y.miao@gmail.com>
> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-pxa/Makefile                                           | 1 -
>  arch/arm/mach-pxa/include/mach/generic.h                             | 1 +
>  drivers/cpufreq/Makefile                                             | 1 +
>  .../mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c    | 5 +----
>  4 files changed, 3 insertions(+), 5 deletions(-)
>  create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
>  rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)

Can i have your Ack or views about 6/9 and 7/9 Patch?

Re: [PATCH 8/9] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to
> drivers/cpufreq.
>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Cc: linux-samsung-soc@vger.kernel.org
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/Kconfig                                   | 46 ---------------
>  arch/arm/mach-s3c24xx/Kconfig                      | 66 +++++++++-------------
>  arch/arm/mach-s3c24xx/Makefile                     |  6 --
>  arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |  0
>  arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |  2 +-
>  arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
>  arch/arm/plat-samsung/include/plat/cpu-freq.h      |  6 +-
>  drivers/cpufreq/Kconfig.arm                        | 58 +++++++++++++++++++
>  drivers/cpufreq/Makefile                           |  5 ++
>  .../cpufreq/s3c2410-cpufreq.c                      |  0
>  .../cpufreq/s3c2412-cpufreq.c                      |  3 +-
>  .../cpufreq/s3c2440-cpufreq.c                      |  0
>  .../cpufreq/s3c24xx-cpufreq-debugfs.c              |  0
>  .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |  0
>  14 files changed, 100 insertions(+), 102 deletions(-)
>  rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
>  rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
>  rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
>  rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
>  rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
>  rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)

Ben/Kukjin,

Can i have your View or Ack for this patch?

Re: [PATCH 9/9] cpufreq: sa11x0: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> This patch moves cpufreq driver of ARM based sa11x0 platform to drivers/cpufreq.
>
> Cc: Russell King <linux@arm.linux.org.uk>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/Kconfig                                   |  8 -------
>  arch/arm/mach-sa1100/Kconfig                       | 26 +++++++++++-----------
>  arch/arm/mach-sa1100/Makefile                      |  3 ---
>  arch/arm/mach-sa1100/include/mach/generic.h        |  1 +
>  drivers/cpufreq/Kconfig.arm                        |  6 +++++
>  drivers/cpufreq/Makefile                           |  2 ++
>  .../cpufreq/sa1100-cpufreq.c                       |  3 +--
>  .../cpufreq/sa1110-cpufreq.c                       |  3 +--
>  8 files changed, 24 insertions(+), 28 deletions(-)
>  create mode 100644 arch/arm/mach-sa1100/include/mach/generic.h
>  rename arch/arm/mach-sa1100/cpu-sa1100.c => drivers/cpufreq/sa1100-cpufreq.c (99%)
>  rename arch/arm/mach-sa1100/cpu-sa1110.c => drivers/cpufreq/sa1110-cpufreq.c (99%)

For this one too :)

Re: [PATCH 6/9] cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq

[Eric Miao]

On Sun, Mar 31, 2013 at 11:52 AM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> Eric/Haojian,
>
> On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>> This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq.
>>
>> Cc: Eric Miao <eric.y.miao@gmail.com>

Acked-by: Eric Miao <eric.y.miao@gmail.com>

>> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>> ---
>>  arch/arm/mach-pxa/Makefile                                           | 1 -
>>  arch/arm/mach-pxa/include/mach/generic.h                             | 1 +
>>  drivers/cpufreq/Makefile                                             | 1 +
>>  .../mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c    | 5 +----
>>  4 files changed, 3 insertions(+), 5 deletions(-)
>>  create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
>>  rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
>
> Can i have your Ack or views about 6/9 and 7/9 Patch?

Re: [PATCH 6/9] cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

On 31 March 2013 10:54, Eric Miao <eric.y.miao@gmail.com> wrote:
> On Sun, Mar 31, 2013 at 11:52 AM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>> Eric/Haojian,
>>
>> On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>>> This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq.
>>>
>>> Cc: Eric Miao <eric.y.miao@gmail.com>
>
> Acked-by: Eric Miao <eric.y.miao@gmail.com>
>
>>> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
>>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>>> ---
>>>  arch/arm/mach-pxa/Makefile                                           | 1 -
>>>  arch/arm/mach-pxa/include/mach/generic.h                             | 1 +
>>>  drivers/cpufreq/Makefile                                             | 1 +
>>>  .../mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c    | 5 +----
>>>  4 files changed, 3 insertions(+), 5 deletions(-)
>>>  create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
>>>  rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
>>
>> Can i have your Ack or views about 6/9 and 7/9 Patch?

Is this for both the patches??

Re: [PATCH 6/9] cpufreq: pxa3xx: move cpufreq driver to drivers/cpufreq

[Eric Miao]

On Sun, Mar 31, 2013 at 2:45 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 31 March 2013 10:54, Eric Miao <eric.y.miao@gmail.com> wrote:
>> On Sun, Mar 31, 2013 at 11:52 AM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>>> Eric/Haojian,
>>>
>>> On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>>>> This patch moves cpufreq driver of ARM based pxa3xx platform to drivers/cpufreq.
>>>>
>>>> Cc: Eric Miao <eric.y.miao@gmail.com>
>>
>> Acked-by: Eric Miao <eric.y.miao@gmail.com>
>>
>>>> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
>>>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>>>> ---
>>>>  arch/arm/mach-pxa/Makefile                                           | 1 -
>>>>  arch/arm/mach-pxa/include/mach/generic.h                             | 1 +
>>>>  drivers/cpufreq/Makefile                                             | 1 +
>>>>  .../mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c    | 5 +----
>>>>  4 files changed, 3 insertions(+), 5 deletions(-)
>>>>  create mode 100644 arch/arm/mach-pxa/include/mach/generic.h
>>>>  rename arch/arm/mach-pxa/cpufreq-pxa3xx.c => drivers/cpufreq/pxa3xx-cpufreq.c (98%)
>>>
>>> Can i have your Ack or views about 6/9 and 7/9 Patch?
>
> Is this for both the patches??

Yes. Take the Ack for both, those two should really belong to drivers/cpufreq.

Re: [PATCH 8/9] cpufreq: s3c24xx: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

On 31 March 2013 09:23, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>> This patch moves cpufreq driver of Samsung's ARM based s3c24xx platform to
>> drivers/cpufreq.
>>
>> Cc: Ben Dooks <ben-linux@fluff.org>
>> Cc: Kukjin Kim <kgene.kim@samsung.com>
>> Cc: linux-samsung-soc@vger.kernel.org
>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>> ---
>>  arch/arm/Kconfig                                   | 46 ---------------
>>  arch/arm/mach-s3c24xx/Kconfig                      | 66 +++++++++-------------
>>  arch/arm/mach-s3c24xx/Makefile                     |  6 --
>>  arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h |  0
>>  arch/arm/mach-s3c24xx/iotiming-s3c2412.c           |  2 +-
>>  arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 10 ++--
>>  arch/arm/plat-samsung/include/plat/cpu-freq.h      |  6 +-
>>  drivers/cpufreq/Kconfig.arm                        | 58 +++++++++++++++++++
>>  drivers/cpufreq/Makefile                           |  5 ++
>>  .../cpufreq/s3c2410-cpufreq.c                      |  0
>>  .../cpufreq/s3c2412-cpufreq.c                      |  3 +-
>>  .../cpufreq/s3c2440-cpufreq.c                      |  0
>>  .../cpufreq/s3c24xx-cpufreq-debugfs.c              |  0
>>  .../cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c |  0
>>  14 files changed, 100 insertions(+), 102 deletions(-)
>>  rename arch/arm/mach-s3c24xx/{ => include/mach}/s3c2412.h (100%)
>>  rename arch/arm/mach-s3c24xx/cpufreq-s3c2410.c => drivers/cpufreq/s3c2410-cpufreq.c (100%)
>>  rename arch/arm/mach-s3c24xx/cpufreq-s3c2412.c => drivers/cpufreq/s3c2412-cpufreq.c (99%)
>>  rename arch/arm/mach-s3c24xx/cpufreq-s3c2440.c => drivers/cpufreq/s3c2440-cpufreq.c (100%)
>>  rename arch/arm/mach-s3c24xx/cpufreq-debugfs.c => drivers/cpufreq/s3c24xx-cpufreq-debugfs.c (100%)
>>  rename arch/arm/mach-s3c24xx/cpufreq.c => drivers/cpufreq/s3c24xx-cpufreq.c (100%)
>
> Ben/Kukjin,
>
> Can i have your View or Ack for this patch?

Ping!!

Re: [PATCH 5/9] cpufreq: integrator: move cpufreq driver to drivers/cpufreq

[Viresh Kumar]

Hi Linus,

On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> This patch moves cpufreq driver of ARM based integrator platform to
> drivers/cpufreq.
>
> Cc: Russell King <linux@arm.linux.org.uk>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/Kconfig                                              | 11 -----------
>  arch/arm/mach-integrator/Makefile                             |  1 -
>  drivers/cpufreq/Kconfig.arm                                   |  8 ++++++++
>  drivers/cpufreq/Makefile                                      |  1 +
>  .../cpu.c => drivers/cpufreq/integrator-cpufreq.c             |  2 --
>  5 files changed, 9 insertions(+), 14 deletions(-)
>  rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)

I didn't knew that you are maintaining integrator now a days.
Can i have your comments/Ack for this patch?

Re: [PATCH 0/9] ARM: CPUFreq: Move drivers arch/arm/ -> drivers/cpufreq

[Arnd Bergmann]

On Monday 25 March 2013, Viresh Kumar wrote:
> 
> Hi,
> 
> This patchset tries to move all CPUFreq drivers for ARM platforms from arch/arm
> to drivers/cpufreq directory.
> 
> This series is dependent (rebased of) on following patches:
> 
> http://www.spinics.net/lists/arm-kernel/msg232540.html
> https://lkml.org/lkml/2013/3/24/151
> 
> I want this series to go through Rafael's tree due to dependencies and so want
> Ack's by respective maintainers.
> 
> These are applied here for people looking to test them:
> 
> http://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-move-drivers

Whole series 

Acked-by: Arnd Bergmann <arnd@arndb.de>

but please post them another time with linux-arm-kernel on Cc.

	Arnd

Re: [PATCH 0/9] ARM: CPUFreq: Move drivers arch/arm/ -> drivers/cpufreq

[Viresh Kumar]

On 4 April 2013 15:08, Arnd Bergmann <arnd.bergmann@linaro.org> wrote:
> Whole series
>
> Acked-by: Arnd Bergmann <arnd@arndb.de>

Thanks.

> but please post them another time with linux-arm-kernel on Cc.

Yes, my fault.

Re: [PATCH 5/9] cpufreq: integrator: move cpufreq driver to drivers/cpufreq

[Linus Walleij]

On Thu, Apr 4, 2013 at 10:32 AM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 25 March 2013 15:41, Viresh Kumar <viresh.kumar@linaro.org> wrote:
>> This patch moves cpufreq driver of ARM based integrator platform to
>> drivers/cpufreq.
>>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>> ---
>>  arch/arm/Kconfig                                              | 11 -----------
>>  arch/arm/mach-integrator/Makefile                             |  1 -
>>  drivers/cpufreq/Kconfig.arm                                   |  8 ++++++++
>>  drivers/cpufreq/Makefile                                      |  1 +
>>  .../cpu.c => drivers/cpufreq/integrator-cpufreq.c             |  2 --
>>  5 files changed, 9 insertions(+), 14 deletions(-)
>>  rename arch/arm/mach-integrator/cpu.c => drivers/cpufreq/integrator-cpufreq.c (99%)
>
> I didn't knew that you are maintaining integrator now a days.
> Can i have your comments/Ack for this patch?

Sure
Acked-by: Linus Walleij <linus.walleij@linaro.org>

This file still #includes a few <mach/*> headers, which stand in the
way for multiplatform, but whatever, it will need some heavy patching
anyway.

Yours,
Linus Walleij