[PATCH 0/2] Fix watchdogd wakeup deferral on RT

[PATCH 0/2] Fix watchdogd wakeup deferral on RT

[Julia Cartwright]

The following two patches solve an issue reported by Steffen Trumtrar
and Tim Sander to the linux-rt-users mailing list.  Namely, the wakeup
of the watchdogd thread being starved by an RT task due to the hrtimer
deferral through ktimersoftd (on PREEMPT_RT_FULL).

The first patch adjusts the kthread_worker locking to make use of a raw
spinlock, making it suitable for work item queueing from hardirq context
on PREEMPT_RT.  This patch can be applied directly to mainline without
any functional change.

The second patch adjusts the hrtimer used by the watchdog core to be a
_HARD timer (and thus not deferred through ktimersoftd w/ PREEMPT_RT).
This patch depends on hrtimer patches carried in the RT patch, and so
should therefore land there.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Tim Sander <tim@krieglstein.org>

Julia Cartwright (2):
  kthread: convert worker lock to raw spinlock
  watchdog, rt: prevent deferral of watchdogd wakeup

 drivers/watchdog/watchdog_dev.c |  2 +-
 include/linux/kthread.h         |  2 +-
 kernel/kthread.c                | 42 ++++++++++++++++-----------------
 3 files changed, 23 insertions(+), 23 deletions(-)

-- 
2.18.0

[PATCH 1/2] kthread: convert worker lock to raw spinlock

[Julia Cartwright]

In order to enable the queuing of kthread work items from hardirq
context even when PREEMPT_RT_FULL is enabled, convert the worker
spin_lock to a raw_spin_lock.

This is only acceptable to do because the work performed under the lock
is well-bounded and minimal.

Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reported-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Julia Cartwright <julia@ni.com>
---
 include/linux/kthread.h |  2 +-
 kernel/kthread.c        | 42 ++++++++++++++++++++---------------------
 2 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index c1961761311d..ad292898f7f2 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -85,7 +85,7 @@ enum {
 
 struct kthread_worker {
 	unsigned int		flags;
-	spinlock_t		lock;
+	raw_spinlock_t		lock;
 	struct list_head	work_list;
 	struct list_head	delayed_work_list;
 	struct task_struct	*task;
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 486dedbd9af5..c1d9ee6671c6 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -597,7 +597,7 @@ void __kthread_init_worker(struct kthread_worker *worker,
 				struct lock_class_key *key)
 {
 	memset(worker, 0, sizeof(struct kthread_worker));
-	spin_lock_init(&worker->lock);
+	raw_spin_lock_init(&worker->lock);
 	lockdep_set_class_and_name(&worker->lock, key, name);
 	INIT_LIST_HEAD(&worker->work_list);
 	INIT_LIST_HEAD(&worker->delayed_work_list);
@@ -639,21 +639,21 @@ int kthread_worker_fn(void *worker_ptr)
 
 	if (kthread_should_stop()) {
 		__set_current_state(TASK_RUNNING);
-		spin_lock_irq(&worker->lock);
+		raw_spin_lock_irq(&worker->lock);
 		worker->task = NULL;
-		spin_unlock_irq(&worker->lock);
+		raw_spin_unlock_irq(&worker->lock);
 		return 0;
 	}
 
 	work = NULL;
-	spin_lock_irq(&worker->lock);
+	raw_spin_lock_irq(&worker->lock);
 	if (!list_empty(&worker->work_list)) {
 		work = list_first_entry(&worker->work_list,
 					struct kthread_work, node);
 		list_del_init(&work->node);
 	}
 	worker->current_work = work;
-	spin_unlock_irq(&worker->lock);
+	raw_spin_unlock_irq(&worker->lock);
 
 	if (work) {
 		__set_current_state(TASK_RUNNING);
@@ -810,12 +810,12 @@ bool kthread_queue_work(struct kthread_worker *worker,
 	bool ret = false;
 	unsigned long flags;
 
-	spin_lock_irqsave(&worker->lock, flags);
+	raw_spin_lock_irqsave(&worker->lock, flags);
 	if (!queuing_blocked(worker, work)) {
 		kthread_insert_work(worker, work, &worker->work_list);
 		ret = true;
 	}
-	spin_unlock_irqrestore(&worker->lock, flags);
+	raw_spin_unlock_irqrestore(&worker->lock, flags);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(kthread_queue_work);
@@ -841,7 +841,7 @@ void kthread_delayed_work_timer_fn(struct timer_list *t)
 	if (WARN_ON_ONCE(!worker))
 		return;
 
-	spin_lock(&worker->lock);
+	raw_spin_lock(&worker->lock);
 	/* Work must not be used with >1 worker, see kthread_queue_work(). */
 	WARN_ON_ONCE(work->worker != worker);
 
@@ -850,7 +850,7 @@ void kthread_delayed_work_timer_fn(struct timer_list *t)
 	list_del_init(&work->node);
 	kthread_insert_work(worker, work, &worker->work_list);
 
-	spin_unlock(&worker->lock);
+	raw_spin_unlock(&worker->lock);
 }
 EXPORT_SYMBOL(kthread_delayed_work_timer_fn);
 
@@ -906,14 +906,14 @@ bool kthread_queue_delayed_work(struct kthread_worker *worker,
 	unsigned long flags;
 	bool ret = false;
 
-	spin_lock_irqsave(&worker->lock, flags);
+	raw_spin_lock_irqsave(&worker->lock, flags);
 
 	if (!queuing_blocked(worker, work)) {
 		__kthread_queue_delayed_work(worker, dwork, delay);
 		ret = true;
 	}
 
-	spin_unlock_irqrestore(&worker->lock, flags);
+	raw_spin_unlock_irqrestore(&worker->lock, flags);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(kthread_queue_delayed_work);
@@ -949,7 +949,7 @@ void kthread_flush_work(struct kthread_work *work)
 	if (!worker)
 		return;
 
-	spin_lock_irq(&worker->lock);
+	raw_spin_lock_irq(&worker->lock);
 	/* Work must not be used with >1 worker, see kthread_queue_work(). */
 	WARN_ON_ONCE(work->worker != worker);
 
@@ -961,7 +961,7 @@ void kthread_flush_work(struct kthread_work *work)
 	else
 		noop = true;
 
-	spin_unlock_irq(&worker->lock);
+	raw_spin_unlock_irq(&worker->lock);
 
 	if (!noop)
 		wait_for_completion(&fwork.done);
@@ -994,9 +994,9 @@ static bool __kthread_cancel_work(struct kthread_work *work, bool is_dwork,
 		 * any queuing is blocked by setting the canceling counter.
 		 */
 		work->canceling++;
-		spin_unlock_irqrestore(&worker->lock, *flags);
+		raw_spin_unlock_irqrestore(&worker->lock, *flags);
 		del_timer_sync(&dwork->timer);
-		spin_lock_irqsave(&worker->lock, *flags);
+		raw_spin_lock_irqsave(&worker->lock, *flags);
 		work->canceling--;
 	}
 
@@ -1043,7 +1043,7 @@ bool kthread_mod_delayed_work(struct kthread_worker *worker,
 	unsigned long flags;
 	int ret = false;
 
-	spin_lock_irqsave(&worker->lock, flags);
+	raw_spin_lock_irqsave(&worker->lock, flags);
 
 	/* Do not bother with canceling when never queued. */
 	if (!work->worker)
@@ -1060,7 +1060,7 @@ bool kthread_mod_delayed_work(struct kthread_worker *worker,
 fast_queue:
 	__kthread_queue_delayed_work(worker, dwork, delay);
 out:
-	spin_unlock_irqrestore(&worker->lock, flags);
+	raw_spin_unlock_irqrestore(&worker->lock, flags);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(kthread_mod_delayed_work);
@@ -1074,7 +1074,7 @@ static bool __kthread_cancel_work_sync(struct kthread_work *work, bool is_dwork)
 	if (!worker)
 		goto out;
 
-	spin_lock_irqsave(&worker->lock, flags);
+	raw_spin_lock_irqsave(&worker->lock, flags);
 	/* Work must not be used with >1 worker, see kthread_queue_work(). */
 	WARN_ON_ONCE(work->worker != worker);
 
@@ -1088,13 +1088,13 @@ static bool __kthread_cancel_work_sync(struct kthread_work *work, bool is_dwork)
 	 * In the meantime, block any queuing by setting the canceling counter.
 	 */
 	work->canceling++;
-	spin_unlock_irqrestore(&worker->lock, flags);
+	raw_spin_unlock_irqrestore(&worker->lock, flags);
 	kthread_flush_work(work);
-	spin_lock_irqsave(&worker->lock, flags);
+	raw_spin_lock_irqsave(&worker->lock, flags);
 	work->canceling--;
 
 out_fast:
-	spin_unlock_irqrestore(&worker->lock, flags);
+	raw_spin_unlock_irqrestore(&worker->lock, flags);
 out:
 	return ret;
 }
-- 
2.18.0

Re: [PATCH 1/2] kthread: convert worker lock to raw spinlock

[Sebastian Andrzej Siewior]

On 2018-09-28 21:03:51 [+0000], Julia Cartwright wrote:
> In order to enable the queuing of kthread work items from hardirq
> context even when PREEMPT_RT_FULL is enabled, convert the worker
> spin_lock to a raw_spin_lock.
> 
> This is only acceptable to do because the work performed under the lock
> is well-bounded and minimal.
> 
> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> Reported-by: Tim Sander <tim@krieglstein.org>
> Signed-off-by: Julia Cartwright <julia@ni.com>

Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

Sebastian

Re: [PATCH 1/2] kthread: convert worker lock to raw spinlock

[Andrea Parri]

Hi Julia,

On Fri, Sep 28, 2018 at 09:03:51PM +0000, Julia Cartwright wrote:
> In order to enable the queuing of kthread work items from hardirq
> context even when PREEMPT_RT_FULL is enabled, convert the worker
> spin_lock to a raw_spin_lock.
> 
> This is only acceptable to do because the work performed under the lock
> is well-bounded and minimal.

Clearly not my topic..., but out of curiosity:  What do you mean by
"well-bounded" and "minimal"?  Can you maybe point me to some doc.?

  Andrea


> 
> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> Reported-by: Tim Sander <tim@krieglstein.org>
> Signed-off-by: Julia Cartwright <julia@ni.com>
> ---
>  include/linux/kthread.h |  2 +-
>  kernel/kthread.c        | 42 ++++++++++++++++++++---------------------
>  2 files changed, 22 insertions(+), 22 deletions(-)
> 
> diff --git a/include/linux/kthread.h b/include/linux/kthread.h
> index c1961761311d..ad292898f7f2 100644
> --- a/include/linux/kthread.h
> +++ b/include/linux/kthread.h
> @@ -85,7 +85,7 @@ enum {
>  
>  struct kthread_worker {
>  	unsigned int		flags;
> -	spinlock_t		lock;
> +	raw_spinlock_t		lock;
>  	struct list_head	work_list;
>  	struct list_head	delayed_work_list;
>  	struct task_struct	*task;
> diff --git a/kernel/kthread.c b/kernel/kthread.c
> index 486dedbd9af5..c1d9ee6671c6 100644
> --- a/kernel/kthread.c
> +++ b/kernel/kthread.c
> @@ -597,7 +597,7 @@ void __kthread_init_worker(struct kthread_worker *worker,
>  				struct lock_class_key *key)
>  {
>  	memset(worker, 0, sizeof(struct kthread_worker));
> -	spin_lock_init(&worker->lock);
> +	raw_spin_lock_init(&worker->lock);
>  	lockdep_set_class_and_name(&worker->lock, key, name);
>  	INIT_LIST_HEAD(&worker->work_list);
>  	INIT_LIST_HEAD(&worker->delayed_work_list);
> @@ -639,21 +639,21 @@ int kthread_worker_fn(void *worker_ptr)
>  
>  	if (kthread_should_stop()) {
>  		__set_current_state(TASK_RUNNING);
> -		spin_lock_irq(&worker->lock);
> +		raw_spin_lock_irq(&worker->lock);
>  		worker->task = NULL;
> -		spin_unlock_irq(&worker->lock);
> +		raw_spin_unlock_irq(&worker->lock);
>  		return 0;
>  	}
>  
>  	work = NULL;
> -	spin_lock_irq(&worker->lock);
> +	raw_spin_lock_irq(&worker->lock);
>  	if (!list_empty(&worker->work_list)) {
>  		work = list_first_entry(&worker->work_list,
>  					struct kthread_work, node);
>  		list_del_init(&work->node);
>  	}
>  	worker->current_work = work;
> -	spin_unlock_irq(&worker->lock);
> +	raw_spin_unlock_irq(&worker->lock);
>  
>  	if (work) {
>  		__set_current_state(TASK_RUNNING);
> @@ -810,12 +810,12 @@ bool kthread_queue_work(struct kthread_worker *worker,
>  	bool ret = false;
>  	unsigned long flags;
>  
> -	spin_lock_irqsave(&worker->lock, flags);
> +	raw_spin_lock_irqsave(&worker->lock, flags);
>  	if (!queuing_blocked(worker, work)) {
>  		kthread_insert_work(worker, work, &worker->work_list);
>  		ret = true;
>  	}
> -	spin_unlock_irqrestore(&worker->lock, flags);
> +	raw_spin_unlock_irqrestore(&worker->lock, flags);
>  	return ret;
>  }
>  EXPORT_SYMBOL_GPL(kthread_queue_work);
> @@ -841,7 +841,7 @@ void kthread_delayed_work_timer_fn(struct timer_list *t)
>  	if (WARN_ON_ONCE(!worker))
>  		return;
>  
> -	spin_lock(&worker->lock);
> +	raw_spin_lock(&worker->lock);
>  	/* Work must not be used with >1 worker, see kthread_queue_work(). */
>  	WARN_ON_ONCE(work->worker != worker);
>  
> @@ -850,7 +850,7 @@ void kthread_delayed_work_timer_fn(struct timer_list *t)
>  	list_del_init(&work->node);
>  	kthread_insert_work(worker, work, &worker->work_list);
>  
> -	spin_unlock(&worker->lock);
> +	raw_spin_unlock(&worker->lock);
>  }
>  EXPORT_SYMBOL(kthread_delayed_work_timer_fn);
>  
> @@ -906,14 +906,14 @@ bool kthread_queue_delayed_work(struct kthread_worker *worker,
>  	unsigned long flags;
>  	bool ret = false;
>  
> -	spin_lock_irqsave(&worker->lock, flags);
> +	raw_spin_lock_irqsave(&worker->lock, flags);
>  
>  	if (!queuing_blocked(worker, work)) {
>  		__kthread_queue_delayed_work(worker, dwork, delay);
>  		ret = true;
>  	}
>  
> -	spin_unlock_irqrestore(&worker->lock, flags);
> +	raw_spin_unlock_irqrestore(&worker->lock, flags);
>  	return ret;
>  }
>  EXPORT_SYMBOL_GPL(kthread_queue_delayed_work);
> @@ -949,7 +949,7 @@ void kthread_flush_work(struct kthread_work *work)
>  	if (!worker)
>  		return;
>  
> -	spin_lock_irq(&worker->lock);
> +	raw_spin_lock_irq(&worker->lock);
>  	/* Work must not be used with >1 worker, see kthread_queue_work(). */
>  	WARN_ON_ONCE(work->worker != worker);
>  
> @@ -961,7 +961,7 @@ void kthread_flush_work(struct kthread_work *work)
>  	else
>  		noop = true;
>  
> -	spin_unlock_irq(&worker->lock);
> +	raw_spin_unlock_irq(&worker->lock);
>  
>  	if (!noop)
>  		wait_for_completion(&fwork.done);
> @@ -994,9 +994,9 @@ static bool __kthread_cancel_work(struct kthread_work *work, bool is_dwork,
>  		 * any queuing is blocked by setting the canceling counter.
>  		 */
>  		work->canceling++;
> -		spin_unlock_irqrestore(&worker->lock, *flags);
> +		raw_spin_unlock_irqrestore(&worker->lock, *flags);
>  		del_timer_sync(&dwork->timer);
> -		spin_lock_irqsave(&worker->lock, *flags);
> +		raw_spin_lock_irqsave(&worker->lock, *flags);
>  		work->canceling--;
>  	}
>  
> @@ -1043,7 +1043,7 @@ bool kthread_mod_delayed_work(struct kthread_worker *worker,
>  	unsigned long flags;
>  	int ret = false;
>  
> -	spin_lock_irqsave(&worker->lock, flags);
> +	raw_spin_lock_irqsave(&worker->lock, flags);
>  
>  	/* Do not bother with canceling when never queued. */
>  	if (!work->worker)
> @@ -1060,7 +1060,7 @@ bool kthread_mod_delayed_work(struct kthread_worker *worker,
>  fast_queue:
>  	__kthread_queue_delayed_work(worker, dwork, delay);
>  out:
> -	spin_unlock_irqrestore(&worker->lock, flags);
> +	raw_spin_unlock_irqrestore(&worker->lock, flags);
>  	return ret;
>  }
>  EXPORT_SYMBOL_GPL(kthread_mod_delayed_work);
> @@ -1074,7 +1074,7 @@ static bool __kthread_cancel_work_sync(struct kthread_work *work, bool is_dwork)
>  	if (!worker)
>  		goto out;
>  
> -	spin_lock_irqsave(&worker->lock, flags);
> +	raw_spin_lock_irqsave(&worker->lock, flags);
>  	/* Work must not be used with >1 worker, see kthread_queue_work(). */
>  	WARN_ON_ONCE(work->worker != worker);
>  
> @@ -1088,13 +1088,13 @@ static bool __kthread_cancel_work_sync(struct kthread_work *work, bool is_dwork)
>  	 * In the meantime, block any queuing by setting the canceling counter.
>  	 */
>  	work->canceling++;
> -	spin_unlock_irqrestore(&worker->lock, flags);
> +	raw_spin_unlock_irqrestore(&worker->lock, flags);
>  	kthread_flush_work(work);
> -	spin_lock_irqsave(&worker->lock, flags);
> +	raw_spin_lock_irqsave(&worker->lock, flags);
>  	work->canceling--;
>  
>  out_fast:
> -	spin_unlock_irqrestore(&worker->lock, flags);
> +	raw_spin_unlock_irqrestore(&worker->lock, flags);
>  out:
>  	return ret;
>  }
> -- 
> 2.18.0
> 

Re: [PATCH 1/2] kthread: convert worker lock to raw spinlock

[Sebastian Andrzej Siewior]

On 2018-10-05 20:10:35 [+0200], Andrea Parri wrote:
> 
> Clearly not my topic..., but out of curiosity:  What do you mean by
> "well-bounded" and "minimal"?  Can you maybe point me to some doc.?

it means that the lock is not held for an arbitrary amount of time like
by processing a list with thousand items. Well-bounded would mean not
process more than one or five (or so) at a time.

>   Andrea

Sebastian

[PATCH RT 2/2] watchdog, rt: prevent deferral of watchdogd wakeup

[Julia Cartwright]

When PREEMPT_RT_FULL is enabled, all hrtimer expiry functions are
deferred for execution into the context of ktimersoftd unless otherwise
annotated.

Deferring the expiry of the hrtimer used by the watchdog core, however,
is a waste, as the callback does nothing but queue a kthread work item
and wakeup watchdogd.

It's worst then that, too: the deferral through ktimersoftd also means
that for correct behavior a user must adjust the scheduling parameters
of both watchdogd _and_ ktimersoftd, which is unnecessary and has other
side effects (like causing unrelated expiry functions to execute at
potentially elevated priority).

Instead, mark the hrtimer used by the watchdog core as being _HARD to
allow it's execution directly from hardirq context.  The work done in
this expiry function is well-bounded and minimal.

A user still must adjust the scheduling parameters of the watchdogd
to be correct w.r.t. their application needs.

Cc: Guenter Roeck <linux@roeck-us.net>
Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reported-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Julia Cartwright <julia@ni.com>
---
 drivers/watchdog/watchdog_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index ffbdc4642ea5..9c2b3e5cebdc 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -945,7 +945,7 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
 		return -ENODEV;
 
 	kthread_init_work(&wd_data->work, watchdog_ping_work);
-	hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD);
 	wd_data->timer.function = watchdog_timer_expired;
 
 	if (wdd->id == 0) {
-- 
2.18.0

Re: [PATCH RT 2/2] watchdog, rt: prevent deferral of watchdogd wakeup

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 4299 bytes --]

Hi Julia,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v4.19-rc5 next-20180928]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Julia-Cartwright/kthread-convert-worker-lock-to-raw-spinlock/20180929-052522
config: i386-randconfig-x008-201838 (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers//watchdog/watchdog_dev.c: In function 'watchdog_cdev_register':
>> drivers//watchdog/watchdog_dev.c:948:49: error: 'HRTIMER_MODE_REL_HARD' undeclared (first use in this function); did you mean 'HRTIMER_MODE_REL_SOFT'?
     hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD);
                                                    ^~~~~~~~~~~~~~~~~~~~~
                                                    HRTIMER_MODE_REL_SOFT
   drivers//watchdog/watchdog_dev.c:948:49: note: each undeclared identifier is reported only once for each function it appears in

vim +948 drivers//watchdog/watchdog_dev.c

   919	
   920	/*
   921	 *	watchdog_cdev_register: register watchdog character device
   922	 *	@wdd: watchdog device
   923	 *	@devno: character device number
   924	 *
   925	 *	Register a watchdog character device including handling the legacy
   926	 *	/dev/watchdog node. /dev/watchdog is actually a miscdevice and
   927	 *	thus we set it up like that.
   928	 */
   929	
   930	static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
   931	{
   932		struct watchdog_core_data *wd_data;
   933		int err;
   934	
   935		wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL);
   936		if (!wd_data)
   937			return -ENOMEM;
   938		kref_init(&wd_data->kref);
   939		mutex_init(&wd_data->lock);
   940	
   941		wd_data->wdd = wdd;
   942		wdd->wd_data = wd_data;
   943	
   944		if (IS_ERR_OR_NULL(watchdog_kworker))
   945			return -ENODEV;
   946	
   947		kthread_init_work(&wd_data->work, watchdog_ping_work);
 > 948		hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD);
   949		wd_data->timer.function = watchdog_timer_expired;
   950	
   951		if (wdd->id == 0) {
   952			old_wd_data = wd_data;
   953			watchdog_miscdev.parent = wdd->parent;
   954			err = misc_register(&watchdog_miscdev);
   955			if (err != 0) {
   956				pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n",
   957					wdd->info->identity, WATCHDOG_MINOR, err);
   958				if (err == -EBUSY)
   959					pr_err("%s: a legacy watchdog module is probably present.\n",
   960						wdd->info->identity);
   961				old_wd_data = NULL;
   962				kfree(wd_data);
   963				return err;
   964			}
   965		}
   966	
   967		/* Fill in the data structures */
   968		cdev_init(&wd_data->cdev, &watchdog_fops);
   969		wd_data->cdev.owner = wdd->ops->owner;
   970	
   971		/* Add the device */
   972		err = cdev_add(&wd_data->cdev, devno, 1);
   973		if (err) {
   974			pr_err("watchdog%d unable to add device %d:%d\n",
   975				wdd->id,  MAJOR(watchdog_devt), wdd->id);
   976			if (wdd->id == 0) {
   977				misc_deregister(&watchdog_miscdev);
   978				old_wd_data = NULL;
   979				kref_put(&wd_data->kref, watchdog_core_data_release);
   980			}
   981			return err;
   982		}
   983	
   984		/* Record time of most recent heartbeat as 'just before now'. */
   985		wd_data->last_hw_keepalive = ktime_sub(ktime_get(), 1);
   986	
   987		/*
   988		 * If the watchdog is running, prevent its driver from being unloaded,
   989		 * and schedule an immediate ping.
   990		 */
   991		if (watchdog_hw_running(wdd)) {
   992			__module_get(wdd->ops->owner);
   993			kref_get(&wd_data->kref);
   994			if (handle_boot_enabled)
   995				hrtimer_start(&wd_data->timer, 0, HRTIMER_MODE_REL);
   996			else
   997				pr_info("watchdog%d running and kernel based pre-userspace handler disabled\n",
   998					wdd->id);
   999		}
  1000	
  1001		return 0;
  1002	}
  1003	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 29470 bytes --]

Re: [PATCH RT 2/2] watchdog, rt: prevent deferral of watchdogd wakeup

[Thomas Gleixner]

On Sat, 29 Sep 2018, kbuild test robot wrote:
> [also build test ERROR on v4.19-rc5 next-20180928]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
> 

It's against the RT tree, so it won't work against next or upstream. I
think it would be good to have a machine parseable tag to describe which
tree/branch/commit patches are applicable to. If that tag is missing, the
bot can assume it's against upstream/next.

Thanks,

	tglx

Re: [PATCH RT 2/2] watchdog, rt: prevent deferral of watchdogd wakeup

[Sebastian Andrzej Siewior]

On 2018-09-29 08:38:55 [+0200], Thomas Gleixner wrote:
> On Sat, 29 Sep 2018, kbuild test robot wrote:
> > [also build test ERROR on v4.19-rc5 next-20180928]
> > [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
> > 
> 
> It's against the RT tree, so it won't work against next or upstream. I
> think it would be good to have a machine parseable tag to describe which
> tree/branch/commit patches are applicable to. If that tag is missing, the
> bot can assume it's against upstream/next.

I asked the testing team to ignore patches or test against the RT tree
if the patch is tagged [PATCH RT]. I think it worked since I haven't
seen those mails.

> Thanks,
> 
> 	tglx

Sebastian

RE: [kbuild-all] [PATCH RT 2/2] watchdog, rt: prevent deferral of watchdogd wakeup

[Li, Philip]

> Subject: Re: [kbuild-all] [PATCH RT 2/2] watchdog, rt: prevent deferral of
> watchdogd wakeup
> 
> On 2018-09-29 08:38:55 [+0200], Thomas Gleixner wrote:
> > On Sat, 29 Sep 2018, kbuild test robot wrote:
> > > [also build test ERROR on v4.19-rc5 next-20180928]
> > > [if your patch is applied to the wrong git tree, please drop us a note to help
> improve the system]
> > >
> >
> > It's against the RT tree, so it won't work against next or upstream. I
> > think it would be good to have a machine parseable tag to describe which
> > tree/branch/commit patches are applicable to. If that tag is missing, the
> > bot can assume it's against upstream/next.
> 
> I asked the testing team to ignore patches or test against the RT tree
> if the patch is tagged [PATCH RT]. I think it worked since I haven't
> seen those mails.
thanks Sebastian for the input, we will consider this to add to our TODO.

> 
> > Thanks,
> >
> > 	tglx
> 
> Sebastian
> _______________________________________________
> kbuild-all mailing list
> kbuild-all@lists.01.org
> https://lists.01.org/mailman/listinfo/kbuild-all

Re: [PATCH RT 2/2] watchdog, rt: prevent deferral of watchdogd wakeup

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 4217 bytes --]

Hi Julia,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v4.19-rc5 next-20180928]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Julia-Cartwright/kthread-convert-worker-lock-to-raw-spinlock/20180929-052522
config: i386-randconfig-s0-201838 (attached as .config)
compiler: gcc-6 (Debian 6.4.0-9) 6.4.0 20171026
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

All errors (new ones prefixed by >>):

   drivers//watchdog/watchdog_dev.c: In function 'watchdog_cdev_register':
>> drivers//watchdog/watchdog_dev.c:948:49: error: 'HRTIMER_MODE_REL_HARD' undeclared (first use in this function)
     hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD);
                                                    ^~~~~~~~~~~~~~~~~~~~~
   drivers//watchdog/watchdog_dev.c:948:49: note: each undeclared identifier is reported only once for each function it appears in

vim +/HRTIMER_MODE_REL_HARD +948 drivers//watchdog/watchdog_dev.c

   919	
   920	/*
   921	 *	watchdog_cdev_register: register watchdog character device
   922	 *	@wdd: watchdog device
   923	 *	@devno: character device number
   924	 *
   925	 *	Register a watchdog character device including handling the legacy
   926	 *	/dev/watchdog node. /dev/watchdog is actually a miscdevice and
   927	 *	thus we set it up like that.
   928	 */
   929	
   930	static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
   931	{
   932		struct watchdog_core_data *wd_data;
   933		int err;
   934	
   935		wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL);
   936		if (!wd_data)
   937			return -ENOMEM;
   938		kref_init(&wd_data->kref);
   939		mutex_init(&wd_data->lock);
   940	
   941		wd_data->wdd = wdd;
   942		wdd->wd_data = wd_data;
   943	
   944		if (IS_ERR_OR_NULL(watchdog_kworker))
   945			return -ENODEV;
   946	
   947		kthread_init_work(&wd_data->work, watchdog_ping_work);
 > 948		hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD);
   949		wd_data->timer.function = watchdog_timer_expired;
   950	
   951		if (wdd->id == 0) {
   952			old_wd_data = wd_data;
   953			watchdog_miscdev.parent = wdd->parent;
   954			err = misc_register(&watchdog_miscdev);
   955			if (err != 0) {
   956				pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n",
   957					wdd->info->identity, WATCHDOG_MINOR, err);
   958				if (err == -EBUSY)
   959					pr_err("%s: a legacy watchdog module is probably present.\n",
   960						wdd->info->identity);
   961				old_wd_data = NULL;
   962				kfree(wd_data);
   963				return err;
   964			}
   965		}
   966	
   967		/* Fill in the data structures */
   968		cdev_init(&wd_data->cdev, &watchdog_fops);
   969		wd_data->cdev.owner = wdd->ops->owner;
   970	
   971		/* Add the device */
   972		err = cdev_add(&wd_data->cdev, devno, 1);
   973		if (err) {
   974			pr_err("watchdog%d unable to add device %d:%d\n",
   975				wdd->id,  MAJOR(watchdog_devt), wdd->id);
   976			if (wdd->id == 0) {
   977				misc_deregister(&watchdog_miscdev);
   978				old_wd_data = NULL;
   979				kref_put(&wd_data->kref, watchdog_core_data_release);
   980			}
   981			return err;
   982		}
   983	
   984		/* Record time of most recent heartbeat as 'just before now'. */
   985		wd_data->last_hw_keepalive = ktime_sub(ktime_get(), 1);
   986	
   987		/*
   988		 * If the watchdog is running, prevent its driver from being unloaded,
   989		 * and schedule an immediate ping.
   990		 */
   991		if (watchdog_hw_running(wdd)) {
   992			__module_get(wdd->ops->owner);
   993			kref_get(&wd_data->kref);
   994			if (handle_boot_enabled)
   995				hrtimer_start(&wd_data->timer, 0, HRTIMER_MODE_REL);
   996			else
   997				pr_info("watchdog%d running and kernel based pre-userspace handler disabled\n",
   998					wdd->id);
   999		}
  1000	
  1001		return 0;
  1002	}
  1003	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 31829 bytes --]

Re: [PATCH RT 2/2] watchdog, rt: prevent deferral of watchdogd wakeup

[Guenter Roeck]

On 09/28/2018 02:03 PM, Julia Cartwright wrote:
> When PREEMPT_RT_FULL is enabled, all hrtimer expiry functions are
> deferred for execution into the context of ktimersoftd unless otherwise
> annotated.
> 
> Deferring the expiry of the hrtimer used by the watchdog core, however,
> is a waste, as the callback does nothing but queue a kthread work item
> and wakeup watchdogd.
> 
> It's worst then that, too: the deferral through ktimersoftd also means
> that for correct behavior a user must adjust the scheduling parameters
> of both watchdogd _and_ ktimersoftd, which is unnecessary and has other
> side effects (like causing unrelated expiry functions to execute at
> potentially elevated priority).
> 
> Instead, mark the hrtimer used by the watchdog core as being _HARD to
> allow it's execution directly from hardirq context.  The work done in
> this expiry function is well-bounded and minimal.
> 
> A user still must adjust the scheduling parameters of the watchdogd
> to be correct w.r.t. their application needs.
> 
> Cc: Guenter Roeck <linux@roeck-us.net>
> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> Reported-by: Tim Sander <tim@krieglstein.org>
> Signed-off-by: Julia Cartwright <julia@ni.com>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   drivers/watchdog/watchdog_dev.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
> index ffbdc4642ea5..9c2b3e5cebdc 100644
> --- a/drivers/watchdog/watchdog_dev.c
> +++ b/drivers/watchdog/watchdog_dev.c
> @@ -945,7 +945,7 @@ static int watchdog_cdev_register(struct watchdog_device *wdd, dev_t devno)
>   		return -ENODEV;
>   
>   	kthread_init_work(&wd_data->work, watchdog_ping_work);
> -	hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> +	hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD);
>   	wd_data->timer.function = watchdog_timer_expired;
>   
>   	if (wdd->id == 0) {
> 

Re: [PATCH RT 2/2] watchdog, rt: prevent deferral of watchdogd wakeup

[Sebastian Andrzej Siewior]

On 2018-09-28 21:03:51 [+0000], Julia Cartwright wrote:
> When PREEMPT_RT_FULL is enabled, all hrtimer expiry functions are
> deferred for execution into the context of ktimersoftd unless otherwise
> annotated.
…
> Signed-off-by: Julia Cartwright <julia@ni.com>

did s@HRTIMER_MODE_REL@HRTIMER_MODE_REL_HARD@ and then applied.

Thank you Julia.

Sebastian