[PATCH v2 0/9] arm64: dts: ti: UDMAP and McASP support

[PATCH v2 0/9] arm64: dts: ti: UDMAP and McASP support

[Peter Ujfalusi]

Hi,

Changes since v1:
- rebased on ti-k3-next
- Corrected j721e mcu_udma node: s/udmap/dma-controller
- Moved the two McASP node patch at the end of the series

The ringacc and UDMA documentation and drivers are in next-20200122.

While adding the DMA support I have noticed few issues which is also fixed by
this series.

Tero: I have included the McASP nodes as well to have examples for other
peripherals on how he binding should be used.
The patches for the McASP driver is not in next, but they are only internal
driver changes (and Kconfig), not adding new DT dependencies.
Since the McASP is disabled in SoC dtsi due to board level configuration needs
it is not going to erroneously probe drivers.

It is up to you if you pick them or not, but I believe they serve a safe and
nice example how the dma binding should be used for UDMA.

Regards,
Peter
---

Peter Ujfalusi (9):
  arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
  arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
  arm64: dts: ti: k3-am65: DMA support
  arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
  arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
  arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under
    main_navss
  arm64: dts: ti: k3-j721e: DMA support
  arm64: dts: ti: k3-am654-main: Add McASP nodes
  arm64: dts: ti: k3-j721e-main: Add McASP nodes

 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      | 122 ++++++-
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi       |  46 +++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 313 ++++++++++++++++--
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  45 +++
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |   2 +-
 5 files changed, 491 insertions(+), 37 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 1/9] arm64: dts: ti: k3-am65-main: Correct main NAVSS representation

[Peter Ujfalusi]

NAVSS is a subsystem containing different IPs, it is not really a bus.
Change the compatible from "simple-bus" to "simple-mfd" to reflect that.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index efb24579922c..e40f7acbec42 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -385,8 +385,8 @@ intr_main_gpio: interrupt-controller0 {
 		ti,sci-rm-range-girq = <0x1>;
 	};
 
-	cbass_main_navss: interconnect0 {
-		compatible = "simple-bus";
+	cbass_main_navss: navss@30800000 {
+		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH v2 1/9] arm64: dts: ti: k3-am65-main: Correct main NAVSS representation

[Lokesh Vutla]

On 22/01/20 1:56 PM, Peter Ujfalusi wrote:
> NAVSS is a subsystem containing different IPs, it is not really a bus.
> Change the compatible from "simple-bus" to "simple-mfd" to reflect that.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index efb24579922c..e40f7acbec42 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -385,8 +385,8 @@ intr_main_gpio: interrupt-controller0 {
>  		ti,sci-rm-range-girq = <0x1>;
>  	};
>  
> -	cbass_main_navss: interconnect0 {
> -		compatible = "simple-bus";
> +	cbass_main_navss: navss@30800000 {

This introduces below dtc warning when built with W=1

arch/arm64/boot/dts/ti/k3-am65-main.dtsi:388.35-530.4: Warning
(unit_address_vs_reg): /interconnect@100000/navss@30800000: node has a unit
name, but no reg property

this is representing cbass inside main_navss, just like cbass_main. You can drop
this patch and the similar mcu version.

Thanks and regards,
Lokesh

> +		compatible = "simple-mfd";
>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  		ranges;
> 

Re: [PATCH v2 1/9] arm64: dts: ti: k3-am65-main: Correct main NAVSS representation

[Peter Ujfalusi]

On 22/01/2020 13.03, Lokesh Vutla wrote:
> 
> 
> On 22/01/20 1:56 PM, Peter Ujfalusi wrote:
>> NAVSS is a subsystem containing different IPs, it is not really a bus.
>> Change the compatible from "simple-bus" to "simple-mfd" to reflect that.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> ---
>>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> index efb24579922c..e40f7acbec42 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> @@ -385,8 +385,8 @@ intr_main_gpio: interrupt-controller0 {
>>  		ti,sci-rm-range-girq = <0x1>;
>>  	};
>>  
>> -	cbass_main_navss: interconnect0 {
>> -		compatible = "simple-bus";
>> +	cbass_main_navss: navss@30800000 {
> 
> This introduces below dtc warning when built with W=1
> 
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi:388.35-530.4: Warning
> (unit_address_vs_reg): /interconnect@100000/navss@30800000: node has a unit
> name, but no reg property

Interesting, the example in
Documentation/devicetree/bindings/dma/ti/k3-udma.yaml

is basically the same and dt_binding_check is happy about it:
DTC     Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml
CHECK   Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml

but it screamed when I had the simple-bus in there (copied from the
existing dtsi file).

The node name for simple-bus _must_ be
'^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

I would not use any of these to NAVSS node...

> this is representing cbass inside main_navss, just like cbass_main. You can drop
> this patch and the similar mcu version.

According to Documentation/devicetree/bindings/mfd/mfd.txt:
- compatible : "simple-mfd" - this signifies that the operating system
  should consider all subnodes of the MFD device as separate devices
  akin to how "simple-bus" indicates when to see subnodes as children
  for a simple memory-mapped bus.

NAVSS is falling into simple-mfd as the devices under it are independent
devices.

> 
> Thanks and regards,
> Lokesh
> 
>> +		compatible = "simple-mfd";
>>  		#address-cells = <2>;
>>  		#size-cells = <2>;
>>  		ranges;
>>

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Re: [PATCH v2 1/9] arm64: dts: ti: k3-am65-main: Correct main NAVSS representation

[Lokesh Vutla]

On 22/01/20 5:09 PM, Peter Ujfalusi wrote:
> 
> 
> On 22/01/2020 13.03, Lokesh Vutla wrote:
>>
>>
>> On 22/01/20 1:56 PM, Peter Ujfalusi wrote:
>>> NAVSS is a subsystem containing different IPs, it is not really a bus.
>>> Change the compatible from "simple-bus" to "simple-mfd" to reflect that.
>>>
>>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>>> ---
>>>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++--
>>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>> index efb24579922c..e40f7acbec42 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>> @@ -385,8 +385,8 @@ intr_main_gpio: interrupt-controller0 {
>>>  		ti,sci-rm-range-girq = <0x1>;
>>>  	};
>>>  
>>> -	cbass_main_navss: interconnect0 {
>>> -		compatible = "simple-bus";
>>> +	cbass_main_navss: navss@30800000 {
>>
>> This introduces below dtc warning when built with W=1
>>
>> arch/arm64/boot/dts/ti/k3-am65-main.dtsi:388.35-530.4: Warning
>> (unit_address_vs_reg): /interconnect@100000/navss@30800000: node has a unit
>> name, but no reg property
> 
> Interesting, the example in
> Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
> 
> is basically the same and dt_binding_check is happy about it:
> DTC     Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml
> CHECK   Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml
> 
> but it screamed when I had the simple-bus in there (copied from the
> existing dtsi file).
> 
> The node name for simple-bus _must_ be
> '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> 
> I would not use any of these to NAVSS node...
> 
>> this is representing cbass inside main_navss, just like cbass_main. You can drop
>> this patch and the similar mcu version.
> 
> According to Documentation/devicetree/bindings/mfd/mfd.txt:
> - compatible : "simple-mfd" - this signifies that the operating system
>   should consider all subnodes of the MFD device as separate devices
>   akin to how "simple-bus" indicates when to see subnodes as children
>   for a simple memory-mapped bus.
> 
> NAVSS is falling into simple-mfd as the devices under it are independent
> devices.

okay, may be rename cbass_main_navss to main_navss.

Thanks and regards,
Lokesh

> 
>>
>> Thanks and regards,
>> Lokesh
>>
>>> +		compatible = "simple-mfd";
>>>  		#address-cells = <2>;
>>>  		#size-cells = <2>;
>>>  		ranges;
>>>
> 
> - Péter
> 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 

Re: [PATCH v2 1/9] arm64: dts: ti: k3-am65-main: Correct main NAVSS representation

[Peter Ujfalusi]

On 23/01/2020 10.32, Lokesh Vutla wrote:
> 
> 
> On 22/01/20 5:09 PM, Peter Ujfalusi wrote:
>>
>>
>> On 22/01/2020 13.03, Lokesh Vutla wrote:
>>>
>>>
>>> On 22/01/20 1:56 PM, Peter Ujfalusi wrote:
>>>> NAVSS is a subsystem containing different IPs, it is not really a bus.
>>>> Change the compatible from "simple-bus" to "simple-mfd" to reflect that.
>>>>
>>>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>>>> ---
>>>>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 4 ++--
>>>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>>> index efb24579922c..e40f7acbec42 100644
>>>> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>>> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>>>> @@ -385,8 +385,8 @@ intr_main_gpio: interrupt-controller0 {
>>>>  		ti,sci-rm-range-girq = <0x1>;
>>>>  	};
>>>>  
>>>> -	cbass_main_navss: interconnect0 {
>>>> -		compatible = "simple-bus";
>>>> +	cbass_main_navss: navss@30800000 {
>>>
>>> This introduces below dtc warning when built with W=1
>>>
>>> arch/arm64/boot/dts/ti/k3-am65-main.dtsi:388.35-530.4: Warning
>>> (unit_address_vs_reg): /interconnect@100000/navss@30800000: node has a unit
>>> name, but no reg property
>>
>> Interesting, the example in
>> Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
>>
>> is basically the same and dt_binding_check is happy about it:
>> DTC     Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml
>> CHECK   Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml
>>
>> but it screamed when I had the simple-bus in there (copied from the
>> existing dtsi file).
>>
>> The node name for simple-bus _must_ be
>> '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
>>
>> I would not use any of these to NAVSS node...
>>
>>> this is representing cbass inside main_navss, just like cbass_main. You can drop
>>> this patch and the similar mcu version.
>>
>> According to Documentation/devicetree/bindings/mfd/mfd.txt:
>> - compatible : "simple-mfd" - this signifies that the operating system
>>   should consider all subnodes of the MFD device as separate devices
>>   akin to how "simple-bus" indicates when to see subnodes as children
>>   for a simple memory-mapped bus.
>>
>> NAVSS is falling into simple-mfd as the devices under it are independent
>> devices.
> 
> okay, may be rename cbass_main_navss to main_navss.

Actually we don't even need label for any of the NAVSS nodes.

> 
> Thanks and regards,
> Lokesh
> 
>>
>>>
>>> Thanks and regards,
>>> Lokesh
>>>
>>>> +		compatible = "simple-mfd";
>>>>  		#address-cells = <2>;
>>>>  		#size-cells = <2>;
>>>>  		ranges;
>>>>
>>
>> - Péter
>>
>> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>>

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 2/9] arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss

[Peter Ujfalusi]

Secure proxy (NAVSS0_SEC_PROXY0) is part of the Navigator Subsystem.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index e40f7acbec42..a125d66dd552 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -51,17 +51,6 @@ gic_its: gic-its@1820000 {
 		};
 	};
 
-	secure_proxy_main: mailbox@32c00000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x00 0x32c00000 0x00 0x100000>,
-		      <0x00 0x32400000 0x00 0x100000>,
-		      <0x00 0x32800000 0x00 0x100000>;
-		interrupt-names = "rx_011";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
 	serdes0: serdes@900000 {
 		compatible = "ti,phy-am654-serdes";
 		reg = <0x0 0x900000 0x0 0x2000>;
@@ -414,6 +403,17 @@ inta_main_udmass: interrupt-controller@33d00000 {
 			ti,sci-rm-range-global-event = <0x1>;
 		};
 
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hwspinlock: spinlock@30e00000 {
 			compatible = "ti,am654-hwspinlock";
 			reg = <0x00 0x30e00000 0x00 0x1000>;
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 3/9] arm64: dts: ti: k3-am65: DMA support

[Peter Ujfalusi]

Add the ringacc and udmap nodes for main and mcu NAVSS.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 39 ++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi  | 46 ++++++++++++++++++++++++
 2 files changed, 85 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index a125d66dd552..be841fc44b76 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -379,6 +379,10 @@ cbass_main_navss: navss@30800000 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <118>;
 
 		intr_main_navss: interrupt-controller1 {
 			compatible = "ti,sci-intr";
@@ -527,6 +531,41 @@ mailbox0_cluster11: mailbox@31f8b000 {
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
 		};
+
+		ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x3c000000 0x0 0x400000>,
+				<0x0 0x38000000 0x0 0x400000>,
+				<0x0 0x31120000 0x0 0x100>,
+				<0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <818>;
+			ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+			ti,dma-ring-reset-quirk;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <187>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,am654-navss-main-udmap";
+			reg =	<0x0 0x31150000 0x0 0x100>,
+				<0x0 0x34000000 0x0 0x100000>,
+				<0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <188>;
+			ti,ringacc = <&ringacc>;
+
+			ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+						<0x2>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
+						<0x5>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+		};
 	};
 
 	main_gpio0:  main_gpio0@600000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 319e821b3c27..e32b3cbb4b25 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -104,6 +104,52 @@ adc {
 		};
 	};
 
+	cbass_mcu_navss: navss@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <119>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+			ti,dma-ring-reset-quirk;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <195>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,am654-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <194>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+						<0x2>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */
+						<0x4>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
+		};
+	};
+
 	fss: fss@47000000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 4/9] arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS

[Peter Ujfalusi]

On am654 the MAIN NAVSS base address was 0x30800000, but in j721e it is
at 0x30000000

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index ee5470edb435..027bd1febafa 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -130,7 +130,7 @@ cbass_main: interconnect@100000 {
 			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
 			 <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
-			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
 			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 5/9] arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation

[Peter Ujfalusi]

NAVSS is a subsystem containing different IPs, it is not really a bus.
Change the compatible from "simple-bus" to "simple-mfd" to reflect that.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 1e9d86b806df..09b49708cdda 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -62,8 +62,8 @@ main_gpio_intr: interrupt-controller0 {
 		ti,sci-rm-range-girq = <0x1>;
 	};
 
-	cbass_main_navss: interconnect0 {
-		compatible = "simple-bus";
+	cbass_main_navss: navss@30000000 {
+		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 6/9] arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss

[Peter Ujfalusi]

Secure proxy (NAVSS0_SEC_PROXY0) and smmu (NAVSS0_TCU) is part of the
Navigator Subsystem.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 43 +++++++++++------------
 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 09b49708cdda..721a398247d0 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -40,17 +40,6 @@ gic_its: gic-its@1820000 {
 		};
 	};
 
-	smmu0: smmu@36600000 {
-		compatible = "arm,smmu-v3";
-		reg = <0x0 0x36600000 0x0 0x100000>;
-		power-domains = <&k3_pds 229 TI_SCI_PD_EXCLUSIVE>;
-		interrupt-parent = <&gic500>;
-		interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "eventq", "gerror";
-		#iommu-cells = <1>;
-	};
-
 	main_gpio_intr: interrupt-controller0 {
 		compatible = "ti,sci-intr";
 		ti,intr-trigger-type = <1>;
@@ -91,6 +80,27 @@ main_udmass_inta: interrupt-controller@33d00000 {
 			ti,sci-rm-range-global-event = <0xd>;
 		};
 
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu0: smmu@36600000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x36600000 0x0 0x100000>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			#iommu-cells = <1>;
+		};
+
 		hwspinlock: spinlock@30e00000 {
 			compatible = "ti,am654-hwspinlock";
 			reg = <0x00 0x30e00000 0x00 0x1000>;
@@ -206,17 +216,6 @@ mailbox0_cluster11: mailbox@31f8b000 {
 		};
 	};
 
-	secure_proxy_main: mailbox@32c00000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x00 0x32c00000 0x00 0x100000>,
-		      <0x00 0x32400000 0x00 0x100000>,
-		      <0x00 0x32800000 0x00 0x100000>;
-		interrupt-names = "rx_011";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
 	main_pmx0: pinmux@11c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 7/9] arm64: dts: ti: k3-j721e: DMA support

[Peter Ujfalusi]

Add the ringacc and udmap nodes for main and mcu NAVSS.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 40 +++++++++++++++++
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      | 45 +++++++++++++++++++
 2 files changed, 85 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 721a398247d0..180805aef39b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -56,6 +56,10 @@ cbass_main_navss: navss@30000000 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <199>;
 
 		main_navss_intr: interrupt-controller1 {
 			compatible = "ti,sci-intr";
@@ -214,6 +218,42 @@ mailbox0_cluster11: mailbox@31f8b000 {
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
 		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x3c000000 0x0 0x400000>,
+				<0x0 0x38000000 0x0 0x400000>,
+				<0x0 0x31120000 0x0 0x100>,
+				<0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg =	<0x0 0x31150000 0x0 0x100>,
+				<0x0 0x34000000 0x0 0x100000>,
+				<0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
 	};
 
 	main_pmx0: pinmux@11c000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 7cf1490f3928..72f6e03f39c3 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -225,4 +225,49 @@ adc {
 			compatible = "ti,am3359-adc";
 		};
 	};
+
+	cbass_mcu_navss: navss@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
 };
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 8/9] arm64: dts: ti: k3-am654-main: Add McASP nodes

[Peter Ujfalusi]

Add the nodes for McASP 0-2 and keep them disabled because several
required properties are not present as they are board specific.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 57 ++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index be841fc44b76..6dd28202a221 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -663,4 +663,61 @@ pcie1_ep: pcie-ep@5600000 {
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 	};
+
+	mcasp0: mcasp@02B00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02B00000 0x0 0x2000>,
+			<0x0 0x02B08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 104 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@02B10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02B10000 0x0 0x2000>,
+			<0x0 0x02B18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 105 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@02B20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02B20000 0x0 0x2000>,
+			<0x0 0x02B28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 106 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
 };
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

[PATCH v2 9/9] arm64: dts: ti: k3-j721e-main: Add McASP nodes

[Peter Ujfalusi]

Add the nodes for McASP 0-11 and keep them disabled because several
required properties are not present as they are board specific.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 228 ++++++++++++++++++++++
 1 file changed, 228 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 180805aef39b..3043df5b3cad 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -735,4 +735,232 @@ ufs@4e84000 {
 			dma-coherent;
 		};
 	};
+
+	mcasp0: mcasp@02b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 174 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@02b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 175 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@02b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 176 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@02b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b30000 0x0 0x2000>,
+			<0x0 0x02b38000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 177 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@02b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b40000 0x0 0x2000>,
+			<0x0 0x02b48000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 178 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp5: mcasp@02b50000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b50000 0x0 0x2000>,
+			<0x0 0x02b58000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 179 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp6: mcasp@02b60000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b60000 0x0 0x2000>,
+			<0x0 0x02b68000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 180 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp7: mcasp@02b70000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b70000 0x0 0x2000>,
+			<0x0 0x02b78000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 181 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp8: mcasp@02b80000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b80000 0x0 0x2000>,
+			<0x0 0x02b88000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 182 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp9: mcasp@02b90000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b90000 0x0 0x2000>,
+			<0x0 0x02b98000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 183 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp10: mcasp@02ba0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02ba0000 0x0 0x2000>,
+			<0x0 0x02ba8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 184 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp11: mcasp@02bb0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02bb0000 0x0 0x2000>,
+			<0x0 0x02bb8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 185 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
 };
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki