LKML Archive on
 help / color / Atom feed
From: "Pablo Sebastián Greco" <>
To: Maxime Ripard <>
Cc:, Rob Herring <>,
	Chen-Yu Tsai <>,
	Jernej Skrabec <>,
	Hans de Goede <>,
	Icenowy Zheng <>,,,
Subject: Re: [PATCH] ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY
Date: Mon, 2 Nov 2020 11:21:14 -0300
Message-ID: <> (raw)
In-Reply-To: <20201102140715.r72yz7jx3usuhqi7@gilmour.lan>

On 2/11/20 11:07, Maxime Ripard wrote:
> Hi,
> On Sat, Oct 31, 2020 at 09:34:15PM -0300, Pablo Greco wrote:
>> The Ethernet PHY on the Bananapi M1 has the RX and TX delays enabled on
>> the PHY, using pull-ups on the RXDLY and TXDLY pins.
>> Fix the phy-mode description to correct reflect this so that the
>> implementation doesn't reconfigure the delays incorrectly. This
>> happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e
>> rx/tx delay config").
>> Fixes: 8a5b272fbf44 ("ARM: dts: sun7i: Add Banana Pi board")
>> Signed-off-by: Pablo Greco <>
> Thanks for sending those patches.
> However, I'm not entirely sure how you sent it but the odd threading you
> used (each other patches being in reply to this one without 0/N in the
> name) seem to confuse the tools we use to apply the patches.
> Can you resend it properly?
> Thanks!
> Maxime
I prepared them individually but sent them together in a single 
git-send-email, that must have been the problem.
I"ll send them again one by one.


  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-01  0:34 Pablo Greco
2020-11-01  0:34 ` [PATCH] ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator Pablo Greco
2020-11-01  7:31   ` Jernej Škrabec
2020-11-01  0:34 ` [PATCH] ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node Pablo Greco
2020-11-01  7:29   ` Jernej Škrabec
2020-11-01  7:34 ` [PATCH] ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY Jernej Škrabec
2020-11-02 14:07 ` Maxime Ripard
2020-11-02 14:21   ` Pablo Sebastián Greco [this message]
2020-11-02 14:16 Pablo Greco
2020-11-02 17:06 ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone