* 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
@ 2014-01-21 10:34 Meelis Roos
2014-01-21 22:10 ` Andrew Morton
0 siblings, 1 reply; 14+ messages in thread
From: Meelis Roos @ 2014-01-21 10:34 UTC (permalink / raw)
To: Linux Kernel list
My HP DL585 G1 gets a the following BUG on module load with 3.13. Have
not noticed it with any earlier kernel, including 3.13-rc8.
BUG: unable to handle kernel paging request at 00000000b4343e88
This is somewhat reproducible - on second boot, it was ordered
differently with respect to other boot messages. Second dmesg is also
below.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0 (mroos@dl585) (gcc version 4.7.2 (Debian 4.7.2-5) ) #45 SMP Tue Jan 21 11:57:29 EET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfff67ff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfff6800-0x00000000bfffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fdc00000-0x00000000fdc00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc10000-0x00000000fdc10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc20000-0x00000000fdc20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc30000-0x00000000fdc30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ffffefff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: HP ProLiant DL585 G1, BIOS A01 02/14/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3fffff max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0000000000 mask FF80000000 write-back
[ 0.000000] 2 base 0100000000 mask FF00000000 write-back
[ 0.000000] 3 base 0200000000 mask FE00000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfff6 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02106000, 0x02106fff] PGTABLE
[ 0.000000] BRK [0x02107000, 0x02107fff] PGTABLE
[ 0.000000] BRK [0x02108000, 0x02108fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3ffc00000-0x3ffdfffff]
[ 0.000000] [mem 0x3ffc00000-0x3ffdfffff] page 2M
[ 0.000000] BRK [0x02109000, 0x02109fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3fc000000-0x3ffbfffff]
[ 0.000000] [mem 0x3fc000000-0x3ffbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x380000000-0x3fbffffff]
[ 0.000000] [mem 0x380000000-0x3fbffffff] page 2M
[ 0.000000] BRK [0x0210a000, 0x0210afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfff5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfff5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x37fffffff]
[ 0.000000] [mem 0x100000000-0x37fffffff] page 2M
[ 0.000000] BRK [0x0210b000, 0x0210bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3ffe00000-0x3ffffefff]
[ 0.000000] [mem 0x3ffe00000-0x3ffffefff] page 4k
[ 0.000000] ACPI: RSDP 00000000000f4f20 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bfff6c00 000044 (v01 HP A01 00000002 \xffffffd2? 0000162E)
[ 0.000000] ACPI: FACP 00000000bfff6c80 0000F4 (v03 HP A01 00000002 \xffffffd2? 0000162E)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131115/tbfadt-653)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1bControlBlock: 32, using default 16 (20131115/tbfadt-653)
[ 0.000000] ACPI: DSDT 00000000bfff6d80 0051D5 (v01 HP DSDT 00000001 MSFT 02000001)
[ 0.000000] ACPI: FACS 00000000bfff68c0 000040
[ 0.000000] ACPI: APIC 00000000bfff6900 0000D0 (v01 HP 00000083 00000002 00000000)
[ 0.000000] ACPI: SPCR 00000000bfff6a00 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
[ 0.000000] ACPI: SRAT 00000000bfff6a80 000150 (v01 HP A01 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 0x01 -> Node 1
[ 0.000000] SRAT: PXM 3 -> APIC 0x02 -> Node 2
[ 0.000000] SRAT: PXM 4 -> APIC 0x03 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xffffffff]
[ 0.000000] SRAT: Node 1 PXM 2 [mem 0x100000000-0x1ffffffff]
[ 0.000000] SRAT: Node 2 PXM 3 [mem 0x200000000-0x2ffffffff]
[ 0.000000] SRAT: Node 3 PXM 4 [mem 0x300000000-0x3ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xffffffff]
[ 0.000000] NODE_DATA [mem 0xbfff3000-0xbfff5fff]
[ 0.000000] Initmem setup node 1 [mem 0x100000000-0x1ffffffff]
[ 0.000000] NODE_DATA [mem 0x1ffffd000-0x1ffffffff]
[ 0.000000] Initmem setup node 2 [mem 0x200000000-0x2ffffffff]
[ 0.000000] NODE_DATA [mem 0x2ffffd000-0x2ffffffff]
[ 0.000000] Initmem setup node 3 [mem 0x300000000-0x3ffffefff]
[ 0.000000] NODE_DATA [mem 0x3ffffc000-0x3ffffefff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bce00000-ffff8800bfdfffff] on node 0
[ 0.000000] [ffffea0004000000-ffffea0007ffffff] PMD -> [ffff8801fbe00000-ffff8801ffdfffff] on node 1
[ 0.000000] [ffffea0008000000-ffffea000bffffff] PMD -> [ffff8802fbe00000-ffff8802ffdfffff] on node 2
[ 0.000000] [ffffea000c000000-ffffea000fffffff] PMD -> [ffff8803fb400000-ffff8803ff3fffff] on node 3
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x3ffffefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbfff5fff]
[ 0.000000] node 1: [mem 0x100000000-0x1ffffffff]
[ 0.000000] node 2: [mem 0x200000000-0x2ffffffff]
[ 0.000000] node 3: [mem 0x300000000-0x3ffffefff]
[ 0.000000] On node 0 totalpages: 786324
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782326 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048575
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048575 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec10000, GSI 24-27
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28])
[ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec20000, GSI 28-31
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32])
[ 0.000000] IOAPIC[3]: apic_id 7, version 17, address 0xfdc00000, GSI 32-35
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36])
[ 0.000000] IOAPIC[4]: apic_id 8, version 17, address 0xfdc10000, GSI 36-39
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfdc20000] gsi_base[40])
[ 0.000000] IOAPIC[5]: apic_id 9, version 17, address 0xfdc20000, GSI 40-43
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfdc30000] gsi_base[44])
[ 0.000000] IOAPIC[6]: apic_id 10, version 17, address 0xfdc30000, GSI 44-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff6000-0xbfff6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff7000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfdbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc00000-0xfdc00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc01000-0xfdc0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc10000-0xfdc10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc11000-0xfdc1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc20000-0xfdc20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc21000-0xfdc2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc30000-0xfdc30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc31000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfdbfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:4
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bcc00000 s76032 r8192 d22272 u1048576
[ 0.000000] pcpu-alloc: s76032 r8192 d22272 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 4 [1] 1 5 [2] 2 6 [3] 3 7
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 3870590
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ fc3e000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 15332028K/15728204K available (6233K kernel code, 2939K rwdata, 1276K rodata, 872K init, 3348K bss, 396176K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2197.041 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.012227] Calibrating delay loop (skipped), value calculated using timer frequency.. 4394.08 BogoMIPS (lpj=8788164)
[ 0.012655] pid_max: default: 32768 minimum: 301
[ 0.015382] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.032886] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.041065] Mount-cache hash table entries: 256
[ 0.041702] Initializing cgroup subsys memory
[ 0.041931] Initializing cgroup subsys devices
[ 0.042138] Initializing cgroup subsys freezer
[ 0.042346] Initializing cgroup subsys net_cls
[ 0.042549] Initializing cgroup subsys blkio
[ 0.042755] Initializing cgroup subsys perf_event
[ 0.042965] Initializing cgroup subsys hugetlb
[ 0.043212] tseg: 0000000000
[ 0.043227] mce: CPU supports 5 MCE banks
[ 0.043455] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.043455] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.043455] tlb_flushall_shift: 4
[ 0.044068] Freeing SMP alternatives memory: 20K (ffffffff81dba000 - ffffffff81dbf000)
[ 0.044404] ACPI: Core revision 20131115
[ 0.048403] ACPI: All ACPI Tables successfully acquired
[ 0.049673] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089566] smpboot: CPU0: AMD Opteron (tm) Processor 848 (fam: 0f, model: 05, stepping: 08)
[ 0.092000] Performance Events: AMD PMU driver.
[ 0.092000] ... version: 0
[ 0.092000] ... bit width: 48
[ 0.092000] ... generic registers: 4
[ 0.092000] ... value mask: 0000ffffffffffff
[ 0.092000] ... max period: 00007fffffffffff
[ 0.092000] ... fixed-purpose events: 0
[ 0.092000] ... event mask: 000000000000000f
[ 0.092000] x86: Booting SMP configuration:
[ 0.101933] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.092000] .... node #1, CPUs: #1
[ 0.180576] .... node #2, CPUs: #2
[ 0.268542] .... node #3, CPUs: #3
[ 0.356220] x86: Booted up 4 nodes, 4 CPUs
[ 0.356539] smpboot: Total of 4 processors activated (17577.77 BogoMIPS)
[ 0.358680] devtmpfs: initialized
[ 0.358680] gcov: version magic: 0x3430372a
[ 0.360280] NET: Registered protocol family 16
[ 0.360584] cpuidle: using governor ladder
[ 0.360752] cpuidle: using governor menu
[ 0.360925] node 0 link 0: io port [1000, 5fff]
[ 0.360929] node 1 link 0: io port [6000, ffff]
[ 0.360931] TOM: 00000000c0000000 aka 3072M
[ 0.361100] node 0 link 0: mmio [f5f00000, f7ffffff]
[ 0.361105] node 0 link 0: mmio [f5e00000, f5efffff]
[ 0.361108] node 0 link 0: mmio [a0000, bffff]
[ 0.361111] node 0 link 0: mmio [fe000000, ffffffff]
[ 0.361113] node 1 link 0: mmio [f8000000, fdffffff]
[ 0.361116] TOM2: 0000000400000000 aka 16384M
[ 0.361289] bus: [bus 00-03] on node 0 link 0
[ 0.361291] bus: 00 [io 0x0000-0x5fff]
[ 0.361293] bus: 00 [mem 0xc0000000-0xf7ffffff]
[ 0.361295] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.361297] bus: 00 [mem 0xfe000000-0xffffffff]
[ 0.361299] bus: 00 [mem 0x400000000-0xfcffffffff]
[ 0.361301] bus: [bus 04-08] on node 1 link 0
[ 0.361302] bus: 04 [io 0x6000-0xffff]
[ 0.361304] bus: 04 [mem 0xf8000000-0xfdffffff]
[ 0.361321] ACPI: bus type PCI registered
[ 0.361547] PCI: Using configuration type 1 for base access
[ 0.361922] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.362098] mtrr: probably your BIOS does not setup all CPUs.
[ 0.362272] mtrr: corrected configuration.
[ 0.363094] bio: create slab <bio-0> at 0
[ 0.363094] ACPI: Added _OSI(Module Device)
[ 0.364016] ACPI: Added _OSI(Processor Device)
[ 0.364186] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.364355] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.369476] ACPI: Interpreter enabled
[ 0.369653] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.370053] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.370451] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[ 0.370859] ACPI: (supports S0 S4 S5)
[ 0.371025] ACPI: Using IOAPIC for interrupt routing
[ 0.371240] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.379134] ACPI: PCI Root Bridge [CFG0] (domain 0000 [bus 00-03])
[ 0.379326] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.379507] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.381434] acpi PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.381438] acpi PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
[ 0.381441] acpi PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
[ 0.381444] acpi PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored)
[ 0.381446] acpi PNP0A03:00: host bridge window [io 0x1000-0x5fff] (ignored)
[ 0.381450] acpi PNP0A03:00: host bridge window [mem 0xf5f00000-0xf7ffffff] (ignored)
[ 0.381453] acpi PNP0A03:00: host bridge window [mem 0xf5e00000-0xf5efffff] (ignored)
[ 0.381456] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.381460] PCI: root bus 00: hardware-probed resources
[ 0.381471] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.381830] PCI host bridge to bus 0000:00
[ 0.382001] pci_bus 0000:00: root bus resource [bus 00-03]
[ 0.382175] pci_bus 0000:00: root bus resource [io 0x0000-0x5fff]
[ 0.382352] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff]
[ 0.382532] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.382712] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xffffffff]
[ 0.382892] pci_bus 0000:00: root bus resource [mem 0x400000000-0xfcffffffff]
[ 0.383098] pci 0000:00:03.0: [1022:7460] type 01 class 0x060400
[ 0.383261] pci 0000:00:04.0: [1022:7468] type 00 class 0x060100
[ 0.383386] pci 0000:00:04.1: [1022:7469] type 00 class 0x01018a
[ 0.383423] pci 0000:00:04.1: reg 0x20: [io 0x2000-0x200f]
[ 0.383504] pci 0000:00:04.3: [1022:746b] type 00 class 0x068000
[ 0.383638] pci 0000:00:07.0: [1022:7450] type 01 class 0x060400
[ 0.383748] pci 0000:00:07.1: [1022:7451] type 00 class 0x080010
[ 0.383852] pci 0000:00:08.0: [1022:7450] type 01 class 0x060400
[ 0.383959] pci 0000:00:08.1: [1022:7451] type 00 class 0x080010
[ 0.384098] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.384186] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.384257] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.384329] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.384406] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
[ 0.384496] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
[ 0.384570] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
[ 0.384637] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
[ 0.384723] pci 0000:00:1a.0: [1022:1100] type 00 class 0x060000
[ 0.384810] pci 0000:00:1a.1: [1022:1101] type 00 class 0x060000
[ 0.384885] pci 0000:00:1a.2: [1022:1102] type 00 class 0x060000
[ 0.384959] pci 0000:00:1a.3: [1022:1103] type 00 class 0x060000
[ 0.385031] pci 0000:00:1b.0: [1022:1100] type 00 class 0x060000
[ 0.385117] pci 0000:00:1b.1: [1022:1101] type 00 class 0x060000
[ 0.385188] pci 0000:00:1b.2: [1022:1102] type 00 class 0x060000
[ 0.385263] pci 0000:00:1b.3: [1022:1103] type 00 class 0x060000
[ 0.385404] pci 0000:01:00.0: [1022:7464] type 00 class 0x0c0310
[ 0.385421] pci 0000:01:00.0: reg 0x10: [mem 0xf7ef0000-0xf7ef0fff]
[ 0.385534] pci 0000:01:00.1: [1022:7464] type 00 class 0x0c0310
[ 0.385550] pci 0000:01:00.1: reg 0x10: [mem 0xf7ee0000-0xf7ee0fff]
[ 0.385679] pci 0000:01:02.0: [0e11:b203] type 00 class 0x088000
[ 0.385700] pci 0000:01:02.0: reg 0x10: [io 0x4800-0x48ff]
[ 0.385712] pci 0000:01:02.0: reg 0x14: [mem 0xf7eb0000-0xf7eb01ff]
[ 0.385855] pci 0000:01:02.2: [0e11:b204] type 00 class 0x088000
[ 0.385878] pci 0000:01:02.2: reg 0x10: [io 0x4000-0x40ff]
[ 0.385891] pci 0000:01:02.2: reg 0x14: [mem 0xf7ea0000-0xf7ea07ff]
[ 0.385904] pci 0000:01:02.2: reg 0x18: [mem 0xf7e90000-0xf7e91fff]
[ 0.385917] pci 0000:01:02.2: reg 0x1c: [mem 0xf7e00000-0xf7e7ffff]
[ 0.385951] pci 0000:01:02.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.385988] pci 0000:01:02.2: PME# supported from D0 D3hot D3cold
[ 0.386073] pci 0000:01:03.0: [1002:4752] type 00 class 0x030000
[ 0.386093] pci 0000:01:03.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.386106] pci 0000:01:03.0: reg 0x14: [io 0x4400-0x44ff]
[ 0.386118] pci 0000:01:03.0: reg 0x18: [mem 0xf5ff0000-0xf5ff0fff]
[ 0.386159] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.386194] pci 0000:01:03.0: supports D1 D2
[ 0.386288] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.386464] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.386469] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff]
[ 0.386538] pci 0000:02:04.0: [0e11:b178] type 00 class 0x010400
[ 0.386558] pci 0000:02:04.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.386566] pci 0000:02:04.0: reg 0x18: [io 0x5000-0x50ff]
[ 0.386577] pci 0000:02:04.0: reg 0x1c: [mem 0xf5ef0000-0xf5ef3fff 64bit pref]
[ 0.386590] pci 0000:02:04.0: reg 0x30: [mem 0x00000000-0x00003fff pref]
[ 0.386620] pci 0000:02:04.0: supports D1
[ 0.386695] pci 0000:02:06.0: [14e4:1648] type 00 class 0x020000
[ 0.386711] pci 0000:02:06.0: reg 0x10: [mem 0xf7fb0000-0xf7fbffff 64bit]
[ 0.386768] pci 0000:02:06.0: PME# supported from D3hot D3cold
[ 0.386837] pci 0000:02:06.1: [14e4:1648] type 00 class 0x020000
[ 0.386853] pci 0000:02:06.1: reg 0x10: [mem 0xf7fa0000-0xf7faffff 64bit]
[ 0.386910] pci 0000:02:06.1: PME# supported from D3hot D3cold
[ 0.386997] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.387173] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.387177] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.387182] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.387348] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 0.388612] ACPI: PCI Root Bridge [CFG1] (domain 0000 [bus 04-08])
[ 0.388793] acpi PNP0A03:01: _OSC: OS supports [Segments MSI]
[ 0.388972] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.390613] acpi PNP0A03:01: host bridge window [io 0x6000-0xffff] (ignored)
[ 0.390616] PCI: root bus 04: hardware-probed resources
[ 0.390621] acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.390962] PCI host bridge to bus 0000:04
[ 0.391131] pci_bus 0000:04: root bus resource [bus 04-08]
[ 0.391305] pci_bus 0000:04: root bus resource [io 0x6000-0xffff]
[ 0.391482] pci_bus 0000:04: root bus resource [mem 0xf8000000-0xfdffffff]
[ 0.391681] pci 0000:04:09.0: [1022:7450] type 01 class 0x060400
[ 0.391794] pci 0000:04:09.1: [1022:7451] type 00 class 0x080010
[ 0.391899] pci 0000:04:0a.0: [1022:7450] type 01 class 0x060400
[ 0.392014] pci 0000:04:0a.1: [1022:7451] type 00 class 0x080010
[ 0.392127] pci 0000:04:0b.0: [1022:7450] type 01 class 0x060400
[ 0.392227] pci 0000:04:0b.1: [1022:7451] type 00 class 0x080010
[ 0.392315] pci 0000:04:0c.0: [1022:7450] type 01 class 0x060400
[ 0.392409] pci 0000:04:0c.1: [1022:7451] type 00 class 0x080010
[ 0.392633] pci 0000:04:09.0: PCI bridge to [bus 05]
[ 0.392931] pci 0000:04:0a.0: PCI bridge to [bus 06]
[ 0.393259] pci 0000:04:0b.0: PCI bridge to [bus 07]
[ 0.393578] pci 0000:04:0c.0: PCI bridge to [bus 08]
[ 0.393996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *7 10 11)
[ 0.394642] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 *10 11)
[ 0.395284] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 *11)
[ 0.395926] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11)
[ 0.396645] ACPI: \_SB_.CFG0: notify handler is installed
[ 0.396671] ACPI: \_SB_.CFG1: notify handler is installed
[ 0.396703] Found 2 acpi root devices
[ 0.396870] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.396870] vgaarb: loaded
[ 0.396870] vgaarb: bridge control possible 0000:01:03.0
[ 0.396870] SCSI subsystem initialized
[ 0.397002] PCI: Using ACPI for IRQ routing
[ 0.397172] PCI: pci_cache_line_size set to 64 bytes
[ 0.397260] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.397265] e820: reserve RAM buffer [mem 0xbfff6800-0xbfffffff]
[ 0.397267] e820: reserve RAM buffer [mem 0x3fffff000-0x3ffffffff]
[ 0.397563] Switched to clocksource refined-jiffies
[ 0.397563] pnp: PnP ACPI init
[ 0.397563] ACPI: bus type PNP registered
[ 0.397563] system 00:00: [io 0x0230-0x0233] has been reserved
[ 0.397563] system 00:00: [io 0x0260-0x0267] has been reserved
[ 0.400014] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.400197] system 00:00: [io 0x0800-0x081f] has been reserved
[ 0.400377] system 00:00: [io 0x0900-0x0903] has been reserved
[ 0.400559] system 00:00: [io 0x0904-0x0907] has been reserved
[ 0.400740] system 00:00: [io 0x0908-0x090b] has been reserved
[ 0.400921] system 00:00: [io 0x090c-0x092e] has been reserved
[ 0.401103] system 00:00: [io 0x092f] has been reserved
[ 0.401281] system 00:00: [io 0x0930-0x09ff] has been reserved
[ 0.401462] system 00:00: [io 0x0c80-0x0c87] has been reserved
[ 0.401644] system 00:00: [io 0x0cf9] could not be reserved
[ 0.401824] system 00:00: [io 0x02f8-0x02ff] has been reserved
[ 0.402012] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.402034] pnp 00:01: [dma 7]
[ 0.402070] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.402106] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.402179] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.402225] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.402264] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.402536] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.402733] pnp 00:07: [dma 2]
[ 0.402784] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.403034] pnp: PnP ACPI: found 8 devices
[ 0.403207] ACPI: bus type PNP unregistered
[ 0.410262] Switched to clocksource acpi_pm
[ 0.410262] pci 0000:00:03.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[ 0.410262] pci 0000:01:03.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.410262] pci 0000:01:02.2: BAR 6: assigned [mem 0xc0020000-0xc002ffff pref]
[ 0.410262] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.410262] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.410262] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff]
[ 0.410262] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xc00fffff pref]
[ 0.410262] pci 0000:02:04.0: BAR 6: assigned [mem 0xf5e00000-0xf5e03fff pref]
[ 0.410385] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.410564] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.410746] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.410933] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.411218] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 0.411402] pci_bus 0000:00: resource 4 [io 0x0000-0x5fff]
[ 0.411406] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xf7ffffff]
[ 0.411409] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.411412] pci_bus 0000:00: resource 7 [mem 0xfe000000-0xffffffff]
[ 0.411415] pci_bus 0000:00: resource 8 [mem 0x400000000-0xfcffffffff]
[ 0.411418] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.411421] pci_bus 0000:01: resource 1 [mem 0xf5f00000-0xf7efffff]
[ 0.411424] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc00fffff pref]
[ 0.411427] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.411430] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.411433] pci_bus 0000:02: resource 2 [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.411464] pci 0000:04:09.0: PCI bridge to [bus 05]
[ 0.411649] pci 0000:04:0a.0: PCI bridge to [bus 06]
[ 0.411833] pci 0000:04:0b.0: PCI bridge to [bus 07]
[ 0.412032] pci 0000:04:0c.0: PCI bridge to [bus 08]
[ 0.412215] pci_bus 0000:04: resource 4 [io 0x6000-0xffff]
[ 0.412218] pci_bus 0000:04: resource 5 [mem 0xf8000000-0xfdffffff]
[ 0.412380] NET: Registered protocol family 2
[ 0.413090] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.414480] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.415517] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.415825] TCP: reno registered
[ 0.416137] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.416605] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.417201] NET: Registered protocol family 1
[ 0.417418] pci 0000:00:04.3: boot interrupts on device [1022:746b] already disabled
[ 0.417706] pci 0000:00:07.0: MSI quirk detected; subordinate MSI disabled
[ 0.417892] pci 0000:00:07.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.418082] pci 0000:00:08.0: MSI quirk detected; subordinate MSI disabled
[ 0.418268] pci 0000:00:08.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.560094] pci 0000:01:03.0: Boot video device
[ 0.560111] pci 0000:04:09.0: MSI quirk detected; subordinate MSI disabled
[ 0.560304] pci 0000:04:09.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.560535] pci 0000:04:0a.0: MSI quirk detected; subordinate MSI disabled
[ 0.560760] pci 0000:04:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.560993] pci 0000:04:0b.0: MSI quirk detected; subordinate MSI disabled
[ 0.561218] pci 0000:04:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.561451] pci 0000:04:0c.0: MSI quirk detected; subordinate MSI disabled
[ 0.561668] pci 0000:04:0c.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.561896] PCI: CLS 64 bytes, default 64
[ 0.564784] PCI-DMA: Disabling AGP.
[ 0.565374] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.565552] PCI-DMA: using GART IOMMU.
[ 0.565727] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.575606] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.593214] gcov: could not create file
[ 0.659644] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.664181] msgmni has been set to 30074
[ 0.664751] cryptomgr_test (65) used greatest stack depth: 7224 bytes left
[ 0.664991] cryptomgr_test (66) used greatest stack depth: 6840 bytes left
[ 0.665329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.665624] io scheduler noop registered
[ 0.665791] io scheduler deadline registered
[ 0.666017] io scheduler cfq registered (default)
[ 0.666305] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.666614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.666895] ACPI: Power Button [PWRF]
[ 0.667116] ACPI: processor limited to max C-state 1
[ 0.667510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.688224] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.730243] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.731109] Linux agpgart interface v0.103
[ 0.731298] HP CISS Driver (v 3.6.26)
[ 0.731839] cciss 0000:02:04.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date.
[ 0.872416] cciss 0000:02:04.0: cciss0: <0xb178> at PCI 0000:02:04.0 IRQ 18 using DAC
[ 0.877382] cciss/c0d0: p1 p2 < p5 >
[ 0.878191] scsi0 : cciss
[ 0.878585] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.880785] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.880994] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.881387] mousedev: PS/2 mouse device common for all mice
[ 0.881739] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.882205] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.882524] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram
[ 0.882997] TCP: cubic registered
[ 0.883414] NET: Registered protocol family 10
[ 0.883936] NET: Registered protocol family 17
[ 0.884175] Key type dns_resolver registered
[ 0.884741] registered taskstats version 1
[ 0.887179] rtc_cmos rtc_cmos: setting system clock to 2014-01-21 10:31:39 UTC (1390300299)
[ 0.933094] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.941431] EXT4-fs (cciss!c0d0p1): couldn't mount as ext3 due to feature incompatibilities
[ 0.942217] EXT4-fs (cciss!c0d0p1): couldn't mount as ext2 due to feature incompatibilities
[ 0.953652] EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.954025] VFS: Mounted root (ext4 filesystem) readonly on device 104:1.
[ 0.969624] devtmpfs: mounted
[ 0.971649] Freeing unused kernel memory: 872K (ffffffff81ce0000 - ffffffff81dba000)
[ 0.971936] Write protecting the kernel read-only data: 10240k
[ 0.979810] Freeing unused kernel memory: 1912K (ffff880001622000 - ffff880001800000)
[ 0.983189] Freeing unused kernel memory: 772K (ffff88000193f000 - ffff880001a00000)
[ 1.408114] modprobe (80) used greatest stack depth: 4616 bytes left
[ 2.155425] udevd[198]: starting version 175
[ 2.416089] shpchp 0000:00:07.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.416394] shpchp 0000:00:07.0: Cannot reserve MMIO region
[ 2.416689] shpchp 0000:00:08.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.416987] shpchp 0000:00:08.0: Cannot reserve MMIO region
[ 2.417342] shpchp 0000:04:09.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.417690] shpchp 0000:04:09.0: Cannot reserve MMIO region
[ 2.417972] shpchp 0000:04:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.418265] shpchp 0000:04:0a.0: Cannot reserve MMIO region
[ 2.418470] shpchp 0000:04:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.418761] shpchp 0000:04:0b.0: Cannot reserve MMIO region
[ 2.418959] shpchp 0000:04:0c.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.419253] shpchp 0000:04:0c.0: Cannot reserve MMIO region
[ 2.419515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.425824] ioapic: probe of 0000:00:07.1 failed with error -22
[ 2.427377] ioapic: probe of 0000:00:08.1 failed with error -22
[ 2.427607] ioapic: probe of 0000:04:09.1 failed with error -22
[ 2.427809] ioapic: probe of 0000:04:0a.1 failed with error -22
[ 2.428098] ioapic: probe of 0000:04:0b.1 failed with error -22
[ 2.428300] ioapic: probe of 0000:04:0c.1 failed with error -22
[ 2.449575] libata version 3.00 loaded.
[ 2.453281] AMD768 RNG detected
[ 2.454634] pata_amd 0000:00:04.1: version 0.4.1
[ 2.470241] scsi1 : pata_amd
[ 2.484421] scsi2 : pata_amd
[ 2.484862] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[ 2.485093] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[ 2.504619] hpwdt 0000:01:02.0: This server does not have an iLO2+ ASIC.
[ 2.523020] pps_core: LinuxPPS API ver. 1 registered
[ 2.523242] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.548143] ACPI: bus type USB registered
[ 2.548486] usbcore: registered new interface driver usbfs
[ 2.548730] usbcore: registered new interface driver hub
[ 2.555879] usbcore: registered new device driver usb
[ 2.567628] PTP clock support registered
[ 2.594803] tg3.c:v3.134 (Sep 16, 2013)
[ 2.606767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.617386] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.634146] BUG: unable to handle kernel paging request at 00000000b4343e88
[ 2.634499] IP: [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.634766] PGD 0
[ 2.635009] Oops: 0000 [#1] SMP
[ 2.635210] Floppy drive(s): fd0 is 1.44M
[ 2.635718] Modules linked in: floppy(+) edac_core(+) pcspkr k8temp(+) ehci_hcd tg3(+) ptp usbcore pps_core libphy hpwdt hpilo usb_common i2c_amd756 i2c_core pata_amd amd_rng libata ioapic evdev shpchp
[ 2.636037] CPU: 2 PID: 368 Comm: modprobe Not tainted 3.13.0 #45
[ 2.636037] Hardware name: HP ProLiant DL585 G1, BIOS A01 02/14/2007
[ 2.636037] task: ffff8803f981c400 ti: ffff8803f98be000 task.ti: ffff8803f98be000
[ 2.636037] RIP: 0010:[<ffffffff8109e31b>] [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.636037] RSP: 0018:ffff8803f98bfd78 EFLAGS: 00010206
[ 2.636037] RAX: ffffffff81ba70c0 RBX: 00000000b4343e88 RCX: 00000000000010cd
[ 2.636037] RDX: ffffffff81ac40a8 RSI: 00000000000149a0 RDI: 00000000b4343e88
[ 2.636037] RBP: ffffffffa0231958 R08: 00000000000149a0 R09: ffff8802fbc149a0
[ 2.636037] R10: ffffea0007e73980 R11: ffff8800b8803b00 R12: ffffffffa0231940
[ 2.636037] R13: ffff8803f98bfe78 R14: 0000000000000000 R15: 0000000000000000
[ 2.636037] FS: 00007f375b73a700(0000) GS:ffff8802fbc00000(0000) knlGS:0000000000000000
[ 2.636037] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.636037] CR2: 00000000b4343e88 CR3: 00000000bc337000 CR4: 00000000000007e0
[ 2.636037] Stack:
[ 2.636037] ffffffff81ac40a0 ffffffff81607663 ffffffffa0230400 ffffffff8160772b
[ 2.636037] 0000000000000000 ffffffff81110ac5 0000000000000004 ffffffff810f7b2b
[ 2.636037] ffffffff810f4000 0000000000000000 0000000000000000 ffffffff00000003
[ 2.636037] Call Trace:
[ 2.636037] [<ffffffff81607663>] ? __mutex_unlock_slowpath+0x53/0x80
[ 2.636037] [<ffffffff8160772b>] ? mutex_unlock+0x2b/0x40
[ 2.636037] [<ffffffff81110ac5>] ? __gcov_init+0x65/0xb0
[ 2.636037] [<ffffffff810f7b2b>] ? load_module+0x223b/0x2710
[ 2.636037] [<ffffffff810f4000>] ? get_modinfo.isra.35+0x110/0x110
[ 2.636037] [<ffffffff8160a0f2>] ? page_fault+0x22/0x30
[ 2.636037] [<ffffffff810f80ee>] ? SyS_init_module+0xee/0x140
[ 2.636037] [<ffffffff816131a1>] ? tracesys+0xd4/0xd9
[ 2.649431] tg3 0000:02:06.0 eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e3
[ 2.649435] tg3 0000:02:06.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.649438] tg3 0000:02:06.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
[ 2.649441] tg3 0000:02:06.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 2.636037] Code: 48 83 ec 08 31 d2 48 ff 05 13 58 da 00 e8 ae fb ff ff 48 ff 05 0f 58 da 00 48 83 c4 08 c3 66 90 48 ff 05 a9 54 da 00 53 48 89 fb <48> 8b 07 a8 0c 75 18 48 89 df 31 d2 be 03 00 00 00 e8 7f fb ff
[ 2.651880] FDC 0 is a National Semiconductor PC87306
[ 2.650994] RIP [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.650994] RSP <ffff8803f98bfd78>
[ 2.650994] CR2: 00000000b4343e88
[ 2.653524] ---[ end trace 1c83e7195a307878 ]---
[ 2.705936] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.707494] ohci-pci: OHCI PCI platform driver
[ 2.708957] tg3 0000:02:06.1 eth1: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e2
[ 2.709270] tg3 0000:02:06.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.709581] tg3 0000:02:06.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.709858] tg3 0000:02:06.1 eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 2.710323] ohci-pci 0000:01:00.0: OHCI PCI host controller
[ 2.710525] ohci-pci 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 2.710884] ohci-pci 0000:01:00.0: irq 19, io mem 0xf7ef0000
[ 2.764430] ata1.00: ATAPI: COMPAQ CD-ROM SN-124, N104, max PIO4
[ 2.766281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.766512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.766858] usb usb1: Product: OHCI PCI host controller
[ 2.767073] usb usb1: Manufacturer: Linux 3.13.0 ohci_hcd
[ 2.767293] usb usb1: SerialNumber: 0000:01:00.0
[ 2.767948] hub 1-0:1.0: USB hub found
[ 2.768245] hub 1-0:1.0: 3 ports detected
[ 2.769201] ohci-pci 0000:01:00.1: OHCI PCI host controller
[ 2.769398] ohci-pci 0000:01:00.1: new USB bus registered, assigned bus number 2
[ 2.769723] ohci-pci 0000:01:00.1: irq 19, io mem 0xf7ee0000
[ 2.774138] ata1.00: configured for PIO4
[ 2.777134] scsi 1:0:0:0: CD-ROM COMPAQ CD-ROM SN-124 N104 PQ: 0 ANSI: 5
[ 2.778189] ata2: port disabled--ignoring
[ 2.826315] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.826519] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.826812] usb usb2: Product: OHCI PCI host controller
[ 2.826989] usb usb2: Manufacturer: Linux 3.13.0 ohci_hcd
[ 2.827187] usb usb2: SerialNumber: 0000:01:00.1
[ 2.827811] hub 2-0:1.0: USB hub found
[ 2.829783] hub 2-0:1.0: 3 ports detected
[ 2.848876] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 2.849088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.849653] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.904261] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 3.114130] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 3.270271] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 63.829832] random: nonblocking pool is initialized
[ 64.340712] Adding 2927612k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2927612k
[ 64.366248] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: (null)
[ 64.507995] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: errors=remount-ro
[ 64.715372] loop: module loaded
[ 66.167305] ip (1882) used greatest stack depth: 4264 bytes left
[ 66.692131] RPC: Registered named UNIX socket transport module.
[ 66.692442] RPC: Registered udp transport module.
[ 66.692620] RPC: Registered tcp transport module.
[ 66.692796] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 66.725621] FS-Cache: Loaded
[ 66.768870] FS-Cache: Netfs 'nfs' registered for caching
[ 66.830715] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 66.889416] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 68.357541] powernow-k8: Power state transitions not supported
[ 68.357762] powernow-k8: Power state transitions not supported
[ 68.357984] powernow-k8: Power state transitions not supported
[ 68.358210] powernow-k8: Power state transitions not supported
[ 68.560384] tg3 0000:02:06.0 eth0: Link is up at 100 Mbps, full duplex
[ 68.560579] tg3 0000:02:06.0 eth0: Flow control is on for TX and on for RX
[ 68.560864] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
===================================================================
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0 (mroos@dl585) (gcc version 4.7.2 (Debian 4.7.2-5) ) #45 SMP Tue Jan 21 11:57:29 EET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfff67ff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfff6800-0x00000000bfffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fdc00000-0x00000000fdc00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc10000-0x00000000fdc10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc20000-0x00000000fdc20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc30000-0x00000000fdc30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ffffefff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: HP ProLiant DL585 G1, BIOS A01 02/14/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3fffff max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0000000000 mask FF80000000 write-back
[ 0.000000] 2 base 0100000000 mask FF00000000 write-back
[ 0.000000] 3 base 0200000000 mask FE00000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfff6 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02106000, 0x02106fff] PGTABLE
[ 0.000000] BRK [0x02107000, 0x02107fff] PGTABLE
[ 0.000000] BRK [0x02108000, 0x02108fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3ffc00000-0x3ffdfffff]
[ 0.000000] [mem 0x3ffc00000-0x3ffdfffff] page 2M
[ 0.000000] BRK [0x02109000, 0x02109fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3fc000000-0x3ffbfffff]
[ 0.000000] [mem 0x3fc000000-0x3ffbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x380000000-0x3fbffffff]
[ 0.000000] [mem 0x380000000-0x3fbffffff] page 2M
[ 0.000000] BRK [0x0210a000, 0x0210afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfff5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfff5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x37fffffff]
[ 0.000000] [mem 0x100000000-0x37fffffff] page 2M
[ 0.000000] BRK [0x0210b000, 0x0210bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3ffe00000-0x3ffffefff]
[ 0.000000] [mem 0x3ffe00000-0x3ffffefff] page 4k
[ 0.000000] ACPI: RSDP 00000000000f4f20 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bfff6c00 000044 (v01 HP A01 00000002 \xffffffd2? 0000162E)
[ 0.000000] ACPI: FACP 00000000bfff6c80 0000F4 (v03 HP A01 00000002 \xffffffd2? 0000162E)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131115/tbfadt-653)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1bControlBlock: 32, using default 16 (20131115/tbfadt-653)
[ 0.000000] ACPI: DSDT 00000000bfff6d80 0051D5 (v01 HP DSDT 00000001 MSFT 02000001)
[ 0.000000] ACPI: FACS 00000000bfff68c0 000040
[ 0.000000] ACPI: APIC 00000000bfff6900 0000D0 (v01 HP 00000083 00000002 00000000)
[ 0.000000] ACPI: SPCR 00000000bfff6a00 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
[ 0.000000] ACPI: SRAT 00000000bfff6a80 000150 (v01 HP A01 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 0x01 -> Node 1
[ 0.000000] SRAT: PXM 3 -> APIC 0x02 -> Node 2
[ 0.000000] SRAT: PXM 4 -> APIC 0x03 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xffffffff]
[ 0.000000] SRAT: Node 1 PXM 2 [mem 0x100000000-0x1ffffffff]
[ 0.000000] SRAT: Node 2 PXM 3 [mem 0x200000000-0x2ffffffff]
[ 0.000000] SRAT: Node 3 PXM 4 [mem 0x300000000-0x3ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xffffffff]
[ 0.000000] NODE_DATA [mem 0xbfff3000-0xbfff5fff]
[ 0.000000] Initmem setup node 1 [mem 0x100000000-0x1ffffffff]
[ 0.000000] NODE_DATA [mem 0x1ffffd000-0x1ffffffff]
[ 0.000000] Initmem setup node 2 [mem 0x200000000-0x2ffffffff]
[ 0.000000] NODE_DATA [mem 0x2ffffd000-0x2ffffffff]
[ 0.000000] Initmem setup node 3 [mem 0x300000000-0x3ffffefff]
[ 0.000000] NODE_DATA [mem 0x3ffffc000-0x3ffffefff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bce00000-ffff8800bfdfffff] on node 0
[ 0.000000] [ffffea0004000000-ffffea0007ffffff] PMD -> [ffff8801fbe00000-ffff8801ffdfffff] on node 1
[ 0.000000] [ffffea0008000000-ffffea000bffffff] PMD -> [ffff8802fbe00000-ffff8802ffdfffff] on node 2
[ 0.000000] [ffffea000c000000-ffffea000fffffff] PMD -> [ffff8803fb400000-ffff8803ff3fffff] on node 3
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x3ffffefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbfff5fff]
[ 0.000000] node 1: [mem 0x100000000-0x1ffffffff]
[ 0.000000] node 2: [mem 0x200000000-0x2ffffffff]
[ 0.000000] node 3: [mem 0x300000000-0x3ffffefff]
[ 0.000000] On node 0 totalpages: 786324
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782326 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048575
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048575 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec10000, GSI 24-27
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28])
[ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec20000, GSI 28-31
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32])
[ 0.000000] IOAPIC[3]: apic_id 7, version 17, address 0xfdc00000, GSI 32-35
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36])
[ 0.000000] IOAPIC[4]: apic_id 8, version 17, address 0xfdc10000, GSI 36-39
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfdc20000] gsi_base[40])
[ 0.000000] IOAPIC[5]: apic_id 9, version 17, address 0xfdc20000, GSI 40-43
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfdc30000] gsi_base[44])
[ 0.000000] IOAPIC[6]: apic_id 10, version 17, address 0xfdc30000, GSI 44-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff6000-0xbfff6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff7000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfdbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc00000-0xfdc00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc01000-0xfdc0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc10000-0xfdc10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc11000-0xfdc1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc20000-0xfdc20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc21000-0xfdc2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc30000-0xfdc30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc31000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfdbfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:4
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bcc00000 s76032 r8192 d22272 u1048576
[ 0.000000] pcpu-alloc: s76032 r8192 d22272 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 4 [1] 1 5 [2] 2 6 [3] 3 7
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 3870590
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 15332028K/15728204K available (6233K kernel code, 2939K rwdata, 1276K rodata, 872K init, 3348K bss, 396176K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2197.164 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.012231] Calibrating delay loop (skipped), value calculated using timer frequency.. 4394.32 BogoMIPS (lpj=8788656)
[ 0.012648] pid_max: default: 32768 minimum: 301
[ 0.015311] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.032957] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.041188] Mount-cache hash table entries: 256
[ 0.041829] Initializing cgroup subsys memory
[ 0.042069] Initializing cgroup subsys devices
[ 0.042280] Initializing cgroup subsys freezer
[ 0.042491] Initializing cgroup subsys net_cls
[ 0.042692] Initializing cgroup subsys blkio
[ 0.042897] Initializing cgroup subsys perf_event
[ 0.043107] Initializing cgroup subsys hugetlb
[ 0.043352] tseg: 0000000000
[ 0.043367] mce: CPU supports 5 MCE banks
[ 0.043592] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.043592] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.043592] tlb_flushall_shift: 4
[ 0.044110] Freeing SMP alternatives memory: 20K (ffffffff81dba000 - ffffffff81dbf000)
[ 0.044460] ACPI: Core revision 20131115
[ 0.048571] ACPI: All ACPI Tables successfully acquired
[ 0.049828] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089731] smpboot: CPU0: AMD Opteron (tm) Processor 848 (fam: 0f, model: 05, stepping: 08)
[ 0.092000] Performance Events: AMD PMU driver.
[ 0.092000] ... version: 0
[ 0.092000] ... bit width: 48
[ 0.092000] ... generic registers: 4
[ 0.092000] ... value mask: 0000ffffffffffff
[ 0.092000] ... max period: 00007fffffffffff
[ 0.092000] ... fixed-purpose events: 0
[ 0.092000] ... event mask: 000000000000000f
[ 0.092000] x86: Booting SMP configuration:
[ 0.101942] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.092000] .... node #1, CPUs: #1
[ 0.180565] .... node #2, CPUs: #2
[ 0.268498] .... node #3, CPUs: #3
[ 0.356178] x86: Booted up 4 nodes, 4 CPUs
[ 0.356498] smpboot: Total of 4 processors activated (17578.03 BogoMIPS)
[ 0.358634] devtmpfs: initialized
[ 0.358634] gcov: version magic: 0x3430372a
[ 0.360275] NET: Registered protocol family 16
[ 0.360588] cpuidle: using governor ladder
[ 0.360757] cpuidle: using governor menu
[ 0.360931] node 0 link 0: io port [1000, 5fff]
[ 0.360935] node 1 link 0: io port [6000, ffff]
[ 0.360938] TOM: 00000000c0000000 aka 3072M
[ 0.361108] node 0 link 0: mmio [f5f00000, f7ffffff]
[ 0.361113] node 0 link 0: mmio [f5e00000, f5efffff]
[ 0.361116] node 0 link 0: mmio [a0000, bffff]
[ 0.361119] node 0 link 0: mmio [fe000000, ffffffff]
[ 0.361121] node 1 link 0: mmio [f8000000, fdffffff]
[ 0.361124] TOM2: 0000000400000000 aka 16384M
[ 0.361296] bus: [bus 00-03] on node 0 link 0
[ 0.361298] bus: 00 [io 0x0000-0x5fff]
[ 0.361300] bus: 00 [mem 0xc0000000-0xf7ffffff]
[ 0.361302] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.361304] bus: 00 [mem 0xfe000000-0xffffffff]
[ 0.361306] bus: 00 [mem 0x400000000-0xfcffffffff]
[ 0.361308] bus: [bus 04-08] on node 1 link 0
[ 0.361309] bus: 04 [io 0x6000-0xffff]
[ 0.361311] bus: 04 [mem 0xf8000000-0xfdffffff]
[ 0.361328] ACPI: bus type PCI registered
[ 0.361554] PCI: Using configuration type 1 for base access
[ 0.361934] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.362110] mtrr: probably your BIOS does not setup all CPUs.
[ 0.362284] mtrr: corrected configuration.
[ 0.363135] bio: create slab <bio-0> at 0
[ 0.363135] ACPI: Added _OSI(Module Device)
[ 0.364011] ACPI: Added _OSI(Processor Device)
[ 0.364181] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.364351] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.369593] ACPI: Interpreter enabled
[ 0.369770] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.370171] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.370569] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[ 0.370977] ACPI: (supports S0 S4 S5)
[ 0.371142] ACPI: Using IOAPIC for interrupt routing
[ 0.371362] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.379391] ACPI: PCI Root Bridge [CFG0] (domain 0000 [bus 00-03])
[ 0.379579] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.379760] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.381558] acpi PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.381561] acpi PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
[ 0.381564] acpi PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
[ 0.381567] acpi PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored)
[ 0.381570] acpi PNP0A03:00: host bridge window [io 0x1000-0x5fff] (ignored)
[ 0.381573] acpi PNP0A03:00: host bridge window [mem 0xf5f00000-0xf7ffffff] (ignored)
[ 0.381576] acpi PNP0A03:00: host bridge window [mem 0xf5e00000-0xf5efffff] (ignored)
[ 0.381579] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.381583] PCI: root bus 00: hardware-probed resources
[ 0.381594] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.381955] PCI host bridge to bus 0000:00
[ 0.382127] pci_bus 0000:00: root bus resource [bus 00-03]
[ 0.382302] pci_bus 0000:00: root bus resource [io 0x0000-0x5fff]
[ 0.382481] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff]
[ 0.382661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.382841] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xffffffff]
[ 0.383022] pci_bus 0000:00: root bus resource [mem 0x400000000-0xfcffffffff]
[ 0.383227] pci 0000:00:03.0: [1022:7460] type 01 class 0x060400
[ 0.383391] pci 0000:00:04.0: [1022:7468] type 00 class 0x060100
[ 0.383517] pci 0000:00:04.1: [1022:7469] type 00 class 0x01018a
[ 0.383555] pci 0000:00:04.1: reg 0x20: [io 0x2000-0x200f]
[ 0.383635] pci 0000:00:04.3: [1022:746b] type 00 class 0x068000
[ 0.383773] pci 0000:00:07.0: [1022:7450] type 01 class 0x060400
[ 0.383882] pci 0000:00:07.1: [1022:7451] type 00 class 0x080010
[ 0.383989] pci 0000:00:08.0: [1022:7450] type 01 class 0x060400
[ 0.384112] pci 0000:00:08.1: [1022:7451] type 00 class 0x080010
[ 0.384235] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.384331] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.384402] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.384474] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.384551] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
[ 0.384642] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
[ 0.384715] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
[ 0.384785] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
[ 0.384871] pci 0000:00:1a.0: [1022:1100] type 00 class 0x060000
[ 0.384963] pci 0000:00:1a.1: [1022:1101] type 00 class 0x060000
[ 0.385038] pci 0000:00:1a.2: [1022:1102] type 00 class 0x060000
[ 0.385113] pci 0000:00:1a.3: [1022:1103] type 00 class 0x060000
[ 0.385189] pci 0000:00:1b.0: [1022:1100] type 00 class 0x060000
[ 0.385278] pci 0000:00:1b.1: [1022:1101] type 00 class 0x060000
[ 0.385354] pci 0000:00:1b.2: [1022:1102] type 00 class 0x060000
[ 0.385428] pci 0000:00:1b.3: [1022:1103] type 00 class 0x060000
[ 0.385574] pci 0000:01:00.0: [1022:7464] type 00 class 0x0c0310
[ 0.385590] pci 0000:01:00.0: reg 0x10: [mem 0xf7ef0000-0xf7ef0fff]
[ 0.385707] pci 0000:01:00.1: [1022:7464] type 00 class 0x0c0310
[ 0.385724] pci 0000:01:00.1: reg 0x10: [mem 0xf7ee0000-0xf7ee0fff]
[ 0.385852] pci 0000:01:02.0: [0e11:b203] type 00 class 0x088000
[ 0.385873] pci 0000:01:02.0: reg 0x10: [io 0x4800-0x48ff]
[ 0.385885] pci 0000:01:02.0: reg 0x14: [mem 0xf7eb0000-0xf7eb01ff]
[ 0.386029] pci 0000:01:02.2: [0e11:b204] type 00 class 0x088000
[ 0.386052] pci 0000:01:02.2: reg 0x10: [io 0x4000-0x40ff]
[ 0.386065] pci 0000:01:02.2: reg 0x14: [mem 0xf7ea0000-0xf7ea07ff]
[ 0.386078] pci 0000:01:02.2: reg 0x18: [mem 0xf7e90000-0xf7e91fff]
[ 0.386091] pci 0000:01:02.2: reg 0x1c: [mem 0xf7e00000-0xf7e7ffff]
[ 0.386125] pci 0000:01:02.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.386162] pci 0000:01:02.2: PME# supported from D0 D3hot D3cold
[ 0.386251] pci 0000:01:03.0: [1002:4752] type 00 class 0x030000
[ 0.386271] pci 0000:01:03.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.386284] pci 0000:01:03.0: reg 0x14: [io 0x4400-0x44ff]
[ 0.386296] pci 0000:01:03.0: reg 0x18: [mem 0xf5ff0000-0xf5ff0fff]
[ 0.386338] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.386372] pci 0000:01:03.0: supports D1 D2
[ 0.386466] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.386642] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.386647] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff]
[ 0.386716] pci 0000:02:04.0: [0e11:b178] type 00 class 0x010400
[ 0.386736] pci 0000:02:04.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.386743] pci 0000:02:04.0: reg 0x18: [io 0x5000-0x50ff]
[ 0.386754] pci 0000:02:04.0: reg 0x1c: [mem 0xf5ef0000-0xf5ef3fff 64bit pref]
[ 0.386767] pci 0000:02:04.0: reg 0x30: [mem 0x00000000-0x00003fff pref]
[ 0.386798] pci 0000:02:04.0: supports D1
[ 0.386870] pci 0000:02:06.0: [14e4:1648] type 00 class 0x020000
[ 0.386886] pci 0000:02:06.0: reg 0x10: [mem 0xf7fb0000-0xf7fbffff 64bit]
[ 0.386944] pci 0000:02:06.0: PME# supported from D3hot D3cold
[ 0.387015] pci 0000:02:06.1: [14e4:1648] type 00 class 0x020000
[ 0.387030] pci 0000:02:06.1: reg 0x10: [mem 0xf7fa0000-0xf7faffff 64bit]
[ 0.387088] pci 0000:02:06.1: PME# supported from D3hot D3cold
[ 0.387173] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.387348] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.387352] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.387357] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.387526] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 0.388748] ACPI: PCI Root Bridge [CFG1] (domain 0000 [bus 04-08])
[ 0.388929] acpi PNP0A03:01: _OSC: OS supports [Segments MSI]
[ 0.389108] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.390650] acpi PNP0A03:01: host bridge window [io 0x6000-0xffff] (ignored)
[ 0.390654] PCI: root bus 04: hardware-probed resources
[ 0.390659] acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.391001] PCI host bridge to bus 0000:04
[ 0.391172] pci_bus 0000:04: root bus resource [bus 04-08]
[ 0.391347] pci_bus 0000:04: root bus resource [io 0x6000-0xffff]
[ 0.391525] pci_bus 0000:04: root bus resource [mem 0xf8000000-0xfdffffff]
[ 0.391724] pci 0000:04:09.0: [1022:7450] type 01 class 0x060400
[ 0.391844] pci 0000:04:09.1: [1022:7451] type 00 class 0x080010
[ 0.391951] pci 0000:04:0a.0: [1022:7450] type 01 class 0x060400
[ 0.392075] pci 0000:04:0a.1: [1022:7451] type 00 class 0x080010
[ 0.392184] pci 0000:04:0b.0: [1022:7450] type 01 class 0x060400
[ 0.392287] pci 0000:04:0b.1: [1022:7451] type 00 class 0x080010
[ 0.392380] pci 0000:04:0c.0: [1022:7450] type 01 class 0x060400
[ 0.392476] pci 0000:04:0c.1: [1022:7451] type 00 class 0x080010
[ 0.392707] pci 0000:04:09.0: PCI bridge to [bus 05]
[ 0.393008] pci 0000:04:0a.0: PCI bridge to [bus 06]
[ 0.393347] pci 0000:04:0b.0: PCI bridge to [bus 07]
[ 0.393678] pci 0000:04:0c.0: PCI bridge to [bus 08]
[ 0.394104] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *7 10 11)
[ 0.394753] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 *10 11)
[ 0.395398] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 *11)
[ 0.396061] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11)
[ 0.396781] ACPI: \_SB_.CFG0: notify handler is installed
[ 0.396809] ACPI: \_SB_.CFG1: notify handler is installed
[ 0.396843] Found 2 acpi root devices
[ 0.397011] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.397011] vgaarb: loaded
[ 0.397011] vgaarb: bridge control possible 0000:01:03.0
[ 0.397011] SCSI subsystem initialized
[ 0.397011] PCI: Using ACPI for IRQ routing
[ 0.397180] PCI: pci_cache_line_size set to 64 bytes
[ 0.397263] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.397267] e820: reserve RAM buffer [mem 0xbfff6800-0xbfffffff]
[ 0.397270] e820: reserve RAM buffer [mem 0x3fffff000-0x3ffffffff]
[ 0.397568] Switched to clocksource refined-jiffies
[ 0.397568] pnp: PnP ACPI init
[ 0.397568] ACPI: bus type PNP registered
[ 0.397568] system 00:00: [io 0x0230-0x0233] has been reserved
[ 0.400016] system 00:00: [io 0x0260-0x0267] has been reserved
[ 0.400197] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.400380] system 00:00: [io 0x0800-0x081f] has been reserved
[ 0.400561] system 00:00: [io 0x0900-0x0903] has been reserved
[ 0.400743] system 00:00: [io 0x0904-0x0907] has been reserved
[ 0.400924] system 00:00: [io 0x0908-0x090b] has been reserved
[ 0.401105] system 00:00: [io 0x090c-0x092e] has been reserved
[ 0.401287] system 00:00: [io 0x092f] has been reserved
[ 0.401465] system 00:00: [io 0x0930-0x09ff] has been reserved
[ 0.401646] system 00:00: [io 0x0c80-0x0c87] has been reserved
[ 0.401829] system 00:00: [io 0x0cf9] could not be reserved
[ 0.402010] system 00:00: [io 0x02f8-0x02ff] has been reserved
[ 0.402196] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.402220] pnp 00:01: [dma 7]
[ 0.402256] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.402293] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.402367] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.402416] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.402457] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.402738] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.402942] pnp 00:07: [dma 2]
[ 0.402991] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.403243] pnp: PnP ACPI: found 8 devices
[ 0.403417] ACPI: bus type PNP unregistered
[ 0.410520] Switched to clocksource acpi_pm
[ 0.410520] pci 0000:00:03.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[ 0.410520] pci 0000:01:03.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.410520] pci 0000:01:02.2: BAR 6: assigned [mem 0xc0020000-0xc002ffff pref]
[ 0.410520] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.410520] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.410520] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff]
[ 0.410520] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xc00fffff pref]
[ 0.410520] pci 0000:02:04.0: BAR 6: assigned [mem 0xf5e00000-0xf5e03fff pref]
[ 0.410520] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.410569] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.410751] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.410937] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.411221] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 0.411405] pci_bus 0000:00: resource 4 [io 0x0000-0x5fff]
[ 0.411408] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xf7ffffff]
[ 0.411411] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.411414] pci_bus 0000:00: resource 7 [mem 0xfe000000-0xffffffff]
[ 0.411417] pci_bus 0000:00: resource 8 [mem 0x400000000-0xfcffffffff]
[ 0.411421] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.411424] pci_bus 0000:01: resource 1 [mem 0xf5f00000-0xf7efffff]
[ 0.411427] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc00fffff pref]
[ 0.411430] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.411433] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.411436] pci_bus 0000:02: resource 2 [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.411467] pci 0000:04:09.0: PCI bridge to [bus 05]
[ 0.411652] pci 0000:04:0a.0: PCI bridge to [bus 06]
[ 0.411835] pci 0000:04:0b.0: PCI bridge to [bus 07]
[ 0.412032] pci 0000:04:0c.0: PCI bridge to [bus 08]
[ 0.412216] pci_bus 0000:04: resource 4 [io 0x6000-0xffff]
[ 0.412220] pci_bus 0000:04: resource 5 [mem 0xf8000000-0xfdffffff]
[ 0.412380] NET: Registered protocol family 2
[ 0.413110] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.414497] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.415512] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.415838] TCP: reno registered
[ 0.416150] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.416624] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.417223] NET: Registered protocol family 1
[ 0.417442] pci 0000:00:04.3: boot interrupts on device [1022:746b] already disabled
[ 0.417728] pci 0000:00:07.0: MSI quirk detected; subordinate MSI disabled
[ 0.417915] pci 0000:00:07.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.418105] pci 0000:00:08.0: MSI quirk detected; subordinate MSI disabled
[ 0.418289] pci 0000:00:08.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.560095] pci 0000:01:03.0: Boot video device
[ 0.560112] pci 0000:04:09.0: MSI quirk detected; subordinate MSI disabled
[ 0.560300] pci 0000:04:09.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.560492] pci 0000:04:0a.0: MSI quirk detected; subordinate MSI disabled
[ 0.560676] pci 0000:04:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.560867] pci 0000:04:0b.0: MSI quirk detected; subordinate MSI disabled
[ 0.561052] pci 0000:04:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.561243] pci 0000:04:0c.0: MSI quirk detected; subordinate MSI disabled
[ 0.561428] pci 0000:04:0c.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.561616] PCI: CLS 64 bytes, default 64
[ 0.564484] PCI-DMA: Disabling AGP.
[ 0.564940] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.565119] PCI-DMA: using GART IOMMU.
[ 0.565296] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.574274] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.591848] gcov: could not create file
[ 0.658982] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.663476] msgmni has been set to 30074
[ 0.664056] cryptomgr_test (65) used greatest stack depth: 7224 bytes left
[ 0.664348] cryptomgr_test (66) used greatest stack depth: 6824 bytes left
[ 0.664687] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.665046] io scheduler noop registered
[ 0.665244] io scheduler deadline registered
[ 0.665512] io scheduler cfq registered (default)
[ 0.665833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.666188] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.666526] ACPI: Power Button [PWRF]
[ 0.666786] ACPI: processor limited to max C-state 1
[ 0.667228] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.688025] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.730748] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.731611] Linux agpgart interface v0.103
[ 0.731801] HP CISS Driver (v 3.6.26)
[ 0.732407] cciss 0000:02:04.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date.
[ 0.852930] cciss 0000:02:04.0: cciss0: <0xb178> at PCI 0000:02:04.0 IRQ 18 using DAC
[ 0.857656] cciss/c0d0: p1 p2 < p5 >
[ 0.858450] scsi0 : cciss
[ 0.858840] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.861580] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.861800] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.862190] mousedev: PS/2 mouse device common for all mice
[ 0.862509] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.862955] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.863277] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram
[ 0.863739] TCP: cubic registered
[ 0.864217] NET: Registered protocol family 10
[ 0.864734] NET: Registered protocol family 17
[ 0.864924] Key type dns_resolver registered
[ 0.865492] registered taskstats version 1
[ 0.867897] rtc_cmos rtc_cmos: setting system clock to 2014-01-21 10:38:13 UTC (1390300693)
[ 0.913701] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.922173] EXT4-fs (cciss!c0d0p1): couldn't mount as ext3 due to feature incompatibilities
[ 0.922965] EXT4-fs (cciss!c0d0p1): couldn't mount as ext2 due to feature incompatibilities
[ 0.935319] EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.935627] VFS: Mounted root (ext4 filesystem) readonly on device 104:1.
[ 0.951380] devtmpfs: mounted
[ 0.953292] Freeing unused kernel memory: 872K (ffffffff81ce0000 - ffffffff81dba000)
[ 0.953579] Write protecting the kernel read-only data: 10240k
[ 0.961249] Freeing unused kernel memory: 1912K (ffff880001622000 - ffff880001800000)
[ 0.964585] Freeing unused kernel memory: 772K (ffff88000193f000 - ffff880001a00000)
[ 1.368522] modprobe (80) used greatest stack depth: 4616 bytes left
[ 2.127804] udevd[198]: starting version 175
[ 2.406772] AMD768 RNG detected
[ 2.418385] BUG: unable to handle kernel paging request at 00000000b4343e88
[ 2.418723] IP: [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.418981] PGD 0
[ 2.419197] ioapic: probe of 0000:00:07.1 failed with error -22
[ 2.419315] ioapic: probe of 0000:00:08.1 failed with error -22
[ 2.419583] Oops: 0000 [#1] SMP
[ 2.419879] Modules linked in: ioapic(+) i2c_core(+) amd_rng evdev
[ 2.420351] CPU: 1 PID: 281 Comm: modprobe Not tainted 3.13.0 #45
[ 2.420351] Hardware name: HP ProLiant DL585 G1, BIOS A01 02/14/2007
[ 2.420351] task: ffff8800bc403300 ti: ffff8800b31d2000 task.ti: ffff8800b31d2000
[ 2.420351] RIP: 0010:[<ffffffff8109e31b>] [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.420351] RSP: 0018:ffff8800b31d3d78 EFLAGS: 00010202
[ 2.420351] RAX: ffffffff81ba70c0 RBX: 00000000b4343e88 RCX: 0000000000000c89
[ 2.420351] RDX: ffffffff81ac40a8 RSI: 00000000000149a0 RDI: 00000000b4343e88
[ 2.420351] RBP: ffffffffa000b038 R08: 00000000000149a0 R09: ffff8801fbc149a0
[ 2.420351] R10: ffffea0007e76480 R11: ffff8800b8803b00 R12: ffffffffa000b020
[ 2.420351] R13: ffff8800b31d3e78 R14: 0000000000000000 R15: 0000000000000000
[ 2.420351] FS: 00007f24c6b1b700(0000) GS:ffff8801fbc00000(0000) knlGS:0000000000000000
[ 2.420351] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.422955] CR2: 00000000b4343e88 CR3: 00000001f9dad000 CR4: 00000000000007e0
[ 2.422955] Stack:
[ 2.422955] ffffffff81ac40a0 ffffffff81607663 ffffffffa0009260 ffffffff8160772b
[ 2.422955] 0000000000000000 ffffffff81110ac5 0000000000000000 ffffffff810f7b2b
[ 2.422955] ffffffff810f4000 0000000000000000 0000000000000000 ffffffff00000003
[ 2.422955] Call Trace:
[ 2.422955] [<ffffffff81607663>] ? __mutex_unlock_slowpath+0x53/0x80
[ 2.422955] [<ffffffff8160772b>] ? mutex_unlock+0x2b/0x40
[ 2.422955] [<ffffffff81110ac5>] ? __gcov_init+0x65/0xb0
[ 2.422955] [<ffffffff810f7b2b>] ? load_module+0x223b/0x2710
[ 2.422955] [<ffffffff810f4000>] ? get_modinfo.isra.35+0x110/0x110
[ 2.422955] [<ffffffff8160a0f2>] ? page_fault+0x22/0x30
[ 2.422955] [<ffffffff810f80ee>] ? SyS_init_module+0xee/0x140
[ 2.422955] [<ffffffff816131a1>] ? tracesys+0xd4/0xd9
[ 2.422955] Code: 48 83 ec 08 31 d2 48 ff 05 13 58 da 00 e8 ae fb ff ff 48 ff 05 0f 58 da 00 48 83 c4 08 c3 66 90 48 ff 05 a9 54 da 00 53 48 89 fb <48> 8b 07 a8 0c 75 18 48 89 df 31 d2 be 03 00 00 00 e8 7f fb ff
[ 2.429521] RIP [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.429521] RSP <ffff8800b31d3d78>
[ 2.429521] CR2: 00000000b4343e88
[ 2.431890] ---[ end trace 0a363fc577f200bc ]---
[ 2.437265] ioapic: probe of 0000:04:09.1 failed with error -22
[ 2.437635] ioapic: probe of 0000:04:0a.1 failed with error -22
[ 2.437878] ioapic: probe of 0000:04:0b.1 failed with error -22
[ 2.438076] ioapic: probe of 0000:04:0c.1 failed with error -22
[ 2.457220] libata version 3.00 loaded.
[ 2.468706] pata_amd 0000:00:04.1: version 0.4.1
[ 2.472980] scsi1 : pata_amd
[ 2.475770] scsi2 : pata_amd
[ 2.476105] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[ 2.476290] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[ 2.479315] shpchp 0000:00:07.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.479620] shpchp 0000:00:07.0: Cannot reserve MMIO region
[ 2.479837] shpchp 0000:00:08.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.480206] shpchp 0000:00:08.0: Cannot reserve MMIO region
[ 2.480682] shpchp 0000:04:09.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.481030] shpchp 0000:04:09.0: Cannot reserve MMIO region
[ 2.481336] shpchp 0000:04:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.481632] shpchp 0000:04:0a.0: Cannot reserve MMIO region
[ 2.481839] shpchp 0000:04:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.482133] shpchp 0000:04:0b.0: Cannot reserve MMIO region
[ 2.482334] shpchp 0000:04:0c.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.482622] shpchp 0000:04:0c.0: Cannot reserve MMIO region
[ 2.482878] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.514443] Floppy drive(s): fd0 is 1.44M
[ 2.553238] hpwdt 0000:01:02.0: This server does not have an iLO2+ ASIC.
[ 2.557128] FDC 0 is a National Semiconductor PC87306
[ 2.571647] pps_core: LinuxPPS API ver. 1 registered
[ 2.571855] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.579664] PTP clock support registered
[ 2.582727] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.606762] tg3.c:v3.134 (Sep 16, 2013)
[ 2.628580] EDAC MC: Ver: 3.0.0
[ 2.663683] tg3 0000:02:06.0 eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e3
[ 2.663978] tg3 0000:02:06.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.664288] tg3 0000:02:06.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
[ 2.664566] tg3 0000:02:06.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 2.691072] ACPI: bus type USB registered
[ 2.691494] usbcore: registered new interface driver usbfs
[ 2.691765] usbcore: registered new interface driver hub
[ 2.692281] usbcore: registered new device driver usb
[ 2.714797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.720380] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.724330] tg3 0000:02:06.1 eth1: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e2
[ 2.724632] tg3 0000:02:06.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.724918] tg3 0000:02:06.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.725197] tg3 0000:02:06.1 eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 2.752381] ata1.00: ATAPI: COMPAQ CD-ROM SN-124, N104, max PIO4
[ 2.768267] ata1.00: configured for PIO4
[ 2.769278] scsi 1:0:0:0: CD-ROM COMPAQ CD-ROM SN-124 N104 PQ: 0 ANSI: 5
[ 2.770300] ata2: port disabled--ignoring
[ 2.793159] ohci-pci: OHCI PCI platform driver
[ 2.793616] ohci-pci 0000:01:00.0: OHCI PCI host controller
[ 2.793810] ohci-pci 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 2.794149] ohci-pci 0000:01:00.0: irq 19, io mem 0xf7ef0000
[ 2.799683] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 2.799885] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.800383] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.810962] MCE: In-kernel MCE decoding enabled.
[ 2.849243] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.850833] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.851058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.851338] usb usb1: Product: OHCI PCI host controller
[ 2.851515] usb usb1: Manufacturer: Linux 3.13.0 ohci_hcd
[ 2.851693] usb usb1: SerialNumber: 0000:01:00.0
[ 2.854488] hub 1-0:1.0: USB hub found
[ 2.854748] hub 1-0:1.0: 3 ports detected
[ 2.855773] ohci-pci 0000:01:00.1: OHCI PCI host controller
[ 2.855976] ohci-pci 0000:01:00.1: new USB bus registered, assigned bus number 2
[ 2.856385] ohci-pci 0000:01:00.1: irq 19, io mem 0xf7ee0000
[ 2.856446] AMD64 EDAC driver v3.4.0
[ 2.858498] EDAC amd64: DRAM ECC enabled.
[ 2.858676] EDAC amd64: K8 revE or earlier detected (node 0).
[ 2.859122] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 2.859308] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 2.859725] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 2.860220] EDAC amd64: DRAM ECC enabled.
[ 2.860445] EDAC amd64: K8 revE or earlier detected (node 1).
[ 2.860738] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 2.860930] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 2.861457] EDAC MC1: Giving out device to module amd64_edac controller K8: DEV 0000:00:19.2 (INTERRUPT)
[ 2.861874] EDAC amd64: DRAM ECC enabled.
[ 2.862102] EDAC amd64: K8 revE or earlier detected (node 2).
[ 2.862430] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 2.862625] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 2.863354] EDAC MC2: Giving out device to module amd64_edac controller K8: DEV 0000:00:1a.2 (INTERRUPT)
[ 2.865352] EDAC amd64: DRAM ECC enabled.
[ 2.865566] EDAC amd64: K8 revE or earlier detected (node 3).
[ 2.865879] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 2.866081] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 2.866595] EDAC MC3: Giving out device to module amd64_edac controller K8: DEV 0000:00:1b.2 (INTERRUPT)
[ 2.868712] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 2.914360] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.914593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.914890] usb usb2: Product: OHCI PCI host controller
[ 2.915102] usb usb2: Manufacturer: Linux 3.13.0 ohci_hcd
[ 2.915291] usb usb2: SerialNumber: 0000:01:00.1
[ 2.915858] hub 2-0:1.0: USB hub found
[ 2.916158] hub 2-0:1.0: 3 ports detected
[ 2.917434] modprobe (351) used greatest stack depth: 4424 bytes left
[ 3.106874] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 3.263036] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 3.684663] random: nonblocking pool is initialized
[ 3.810175] Adding 2927612k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2927612k
[ 3.837569] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: (null)
[ 3.973001] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: errors=remount-ro
[ 4.167126] loop: module loaded
[ 5.620763] ip (1514) used greatest stack depth: 4264 bytes left
[ 6.106409] RPC: Registered named UNIX socket transport module.
[ 6.106690] RPC: Registered udp transport module.
[ 6.106873] RPC: Registered tcp transport module.
[ 6.107049] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.127667] FS-Cache: Loaded
[ 6.170867] FS-Cache: Netfs 'nfs' registered for caching
[ 6.236861] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.548432] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.839665] powernow-k8: Power state transitions not supported
[ 7.839877] powernow-k8: Power state transitions not supported
[ 7.840108] powernow-k8: Power state transitions not supported
[ 7.840348] powernow-k8: Power state transitions not supported
[ 8.130772] tg3 0000:02:06.0 eth0: Link is up at 100 Mbps, full duplex
[ 8.130966] tg3 0000:02:06.0 eth0: Flow control is on for TX and on for RX
[ 8.131198] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-01-21 10:34 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88 Meelis Roos
@ 2014-01-21 22:10 ` Andrew Morton
2014-01-22 15:33 ` Meelis Roos
0 siblings, 1 reply; 14+ messages in thread
From: Andrew Morton @ 2014-01-21 22:10 UTC (permalink / raw)
To: Meelis Roos; +Cc: Linux Kernel list, Peter Oberparleiter
On Tue, 21 Jan 2014 12:34:24 +0200 (EET) Meelis Roos <mroos@linux.ee> wrote:
> My HP DL585 G1 gets a the following BUG on module load with 3.13. Have
> not noticed it with any earlier kernel, including 3.13-rc8.
>
> BUG: unable to handle kernel paging request at 00000000b4343e88
>
> This is somewhat reproducible - on second boot, it was ordered
> differently with respect to other boot messages. Second dmesg is also
> below.
It looks like gcov exploded when running a module's constructors or
init function, but I'm unable to work out which module it was :(
> ...
>
> [ 2.606767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.617386] input: PC Speaker as /devices/platform/pcspkr/input/input3
> [ 2.634146] BUG: unable to handle kernel paging request at 00000000b4343e88
> [ 2.634499] IP: [<ffffffff8109e31b>] wake_up_process+0xb/0x50
> [ 2.634766] PGD 0
> [ 2.635009] Oops: 0000 [#1] SMP
> [ 2.635210] Floppy drive(s): fd0 is 1.44M
> [ 2.635718] Modules linked in: floppy(+) edac_core(+) pcspkr k8temp(+) ehci_hcd tg3(+) ptp usbcore pps_core libphy hpwdt hpilo usb_common i2c_amd756 i2c_core pata_amd amd_rng libata ioapic evdev shpchp
> [ 2.636037] CPU: 2 PID: 368 Comm: modprobe Not tainted 3.13.0 #45
> [ 2.636037] Hardware name: HP ProLiant DL585 G1, BIOS A01 02/14/2007
> [ 2.636037] task: ffff8803f981c400 ti: ffff8803f98be000 task.ti: ffff8803f98be000
> [ 2.636037] RIP: 0010:[<ffffffff8109e31b>] [<ffffffff8109e31b>] wake_up_process+0xb/0x50
> [ 2.636037] RSP: 0018:ffff8803f98bfd78 EFLAGS: 00010206
> [ 2.636037] RAX: ffffffff81ba70c0 RBX: 00000000b4343e88 RCX: 00000000000010cd
> [ 2.636037] RDX: ffffffff81ac40a8 RSI: 00000000000149a0 RDI: 00000000b4343e88
> [ 2.636037] RBP: ffffffffa0231958 R08: 00000000000149a0 R09: ffff8802fbc149a0
> [ 2.636037] R10: ffffea0007e73980 R11: ffff8800b8803b00 R12: ffffffffa0231940
> [ 2.636037] R13: ffff8803f98bfe78 R14: 0000000000000000 R15: 0000000000000000
> [ 2.636037] FS: 00007f375b73a700(0000) GS:ffff8802fbc00000(0000) knlGS:0000000000000000
> [ 2.636037] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 2.636037] CR2: 00000000b4343e88 CR3: 00000000bc337000 CR4: 00000000000007e0
> [ 2.636037] Stack:
> [ 2.636037] ffffffff81ac40a0 ffffffff81607663 ffffffffa0230400 ffffffff8160772b
> [ 2.636037] 0000000000000000 ffffffff81110ac5 0000000000000004 ffffffff810f7b2b
> [ 2.636037] ffffffff810f4000 0000000000000000 0000000000000000 ffffffff00000003
> [ 2.636037] Call Trace:
> [ 2.636037] [<ffffffff81607663>] ? __mutex_unlock_slowpath+0x53/0x80
> [ 2.636037] [<ffffffff8160772b>] ? mutex_unlock+0x2b/0x40
> [ 2.636037] [<ffffffff81110ac5>] ? __gcov_init+0x65/0xb0
> [ 2.636037] [<ffffffff810f7b2b>] ? load_module+0x223b/0x2710
> [ 2.636037] [<ffffffff810f4000>] ? get_modinfo.isra.35+0x110/0x110
> [ 2.636037] [<ffffffff8160a0f2>] ? page_fault+0x22/0x30
> [ 2.636037] [<ffffffff810f80ee>] ? SyS_init_module+0xee/0x140
> [ 2.636037] [<ffffffff816131a1>] ? tracesys+0xd4/0xd9
> [ 2.649431] tg3 0000:02:06.0 eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e3
> [ 2.649435] tg3 0000:02:06.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
> [ 2.649438] tg3 0000:02:06.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
> [ 2.649441] tg3 0000:02:06.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
> [ 2.636037] Code: 48 83 ec 08 31 d2 48 ff 05 13 58 da 00 e8 ae fb ff ff 48 ff 05 0f 58 da 00 48 83 c4 08 c3 66 90 48 ff 05 a9 54 da 00 53 48 89 fb <48> 8b 07 a8 0c 75 18 48 89 df 31 d2 be 03 00 00 00 e8 7f fb ff
> [ 2.651880] FDC 0 is a National Semiconductor PC87306
> [ 2.650994] RIP [<ffffffff8109e31b>] wake_up_process+0xb/0x50
> [ 2.650994] RSP <ffff8803f98bfd78>
> [ 2.650994] CR2: 00000000b4343e88
> [ 2.653524] ---[ end trace 1c83e7195a307878 ]---
> [ 2.705936] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>
> ...
>
Maybe it's tg3.
Could you add `ignore_loglevel' to the kernel boot parameters? That
should make all pr_debug()s come out and they include the module's
name.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-01-21 22:10 ` Andrew Morton
@ 2014-01-22 15:33 ` Meelis Roos
2014-01-24 13:47 ` Peter Oberparleiter
0 siblings, 1 reply; 14+ messages in thread
From: Meelis Roos @ 2014-01-22 15:33 UTC (permalink / raw)
To: Andrew Morton; +Cc: Linux Kernel list, Peter Oberparleiter
> It looks like gcov exploded when running a module's constructors or
> init function, but I'm unable to work out which module it was :(
[...]
> Maybe it's tg3.
>
> Could you add `ignore_loglevel' to the kernel boot parameters? That
> should make all pr_debug()s come out and they include the module's
> name.
Not much help - perhaps initcall_debug=1 ? Last one ise also below.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0 (mroos@dl585) (gcc version 4.7.2 (Debian 4.7.2-5) ) #45 SMP Tue Jan 21 11:57:29 EET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro ignore_loglevel
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfff67ff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfff6800-0x00000000bfffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fdc00000-0x00000000fdc00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc10000-0x00000000fdc10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc20000-0x00000000fdc20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc30000-0x00000000fdc30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ffffefff] usable
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: HP ProLiant DL585 G1, BIOS A01 02/14/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3fffff max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0000000000 mask FF80000000 write-back
[ 0.000000] 2 base 0100000000 mask FF00000000 write-back
[ 0.000000] 3 base 0200000000 mask FE00000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfff6 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02106000, 0x02106fff] PGTABLE
[ 0.000000] BRK [0x02107000, 0x02107fff] PGTABLE
[ 0.000000] BRK [0x02108000, 0x02108fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3ffc00000-0x3ffdfffff]
[ 0.000000] [mem 0x3ffc00000-0x3ffdfffff] page 2M
[ 0.000000] BRK [0x02109000, 0x02109fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3fc000000-0x3ffbfffff]
[ 0.000000] [mem 0x3fc000000-0x3ffbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x380000000-0x3fbffffff]
[ 0.000000] [mem 0x380000000-0x3fbffffff] page 2M
[ 0.000000] BRK [0x0210a000, 0x0210afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfff5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfff5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x37fffffff]
[ 0.000000] [mem 0x100000000-0x37fffffff] page 2M
[ 0.000000] BRK [0x0210b000, 0x0210bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3ffe00000-0x3ffffefff]
[ 0.000000] [mem 0x3ffe00000-0x3ffffefff] page 4k
[ 0.000000] ACPI: RSDP 00000000000f4f20 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bfff6c00 000044 (v01 HP A01 00000002 \xffffffd2? 0000162E)
[ 0.000000] ACPI: FACP 00000000bfff6c80 0000F4 (v03 HP A01 00000002 \xffffffd2? 0000162E)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131115/tbfadt-653)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1bControlBlock: 32, using default 16 (20131115/tbfadt-653)
[ 0.000000] ACPI: DSDT 00000000bfff6d80 0051D5 (v01 HP DSDT 00000001 MSFT 02000001)
[ 0.000000] ACPI: FACS 00000000bfff68c0 000040
[ 0.000000] ACPI: APIC 00000000bfff6900 0000D0 (v01 HP 00000083 00000002 00000000)
[ 0.000000] ACPI: SPCR 00000000bfff6a00 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
[ 0.000000] ACPI: SRAT 00000000bfff6a80 000150 (v01 HP A01 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 0x01 -> Node 1
[ 0.000000] SRAT: PXM 3 -> APIC 0x02 -> Node 2
[ 0.000000] SRAT: PXM 4 -> APIC 0x03 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xffffffff]
[ 0.000000] SRAT: Node 1 PXM 2 [mem 0x100000000-0x1ffffffff]
[ 0.000000] SRAT: Node 2 PXM 3 [mem 0x200000000-0x2ffffffff]
[ 0.000000] SRAT: Node 3 PXM 4 [mem 0x300000000-0x3ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xffffffff]
[ 0.000000] NODE_DATA [mem 0xbfff3000-0xbfff5fff]
[ 0.000000] Initmem setup node 1 [mem 0x100000000-0x1ffffffff]
[ 0.000000] NODE_DATA [mem 0x1ffffd000-0x1ffffffff]
[ 0.000000] Initmem setup node 2 [mem 0x200000000-0x2ffffffff]
[ 0.000000] NODE_DATA [mem 0x2ffffd000-0x2ffffffff]
[ 0.000000] Initmem setup node 3 [mem 0x300000000-0x3ffffefff]
[ 0.000000] NODE_DATA [mem 0x3ffffc000-0x3ffffefff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bce00000-ffff8800bfdfffff] on node 0
[ 0.000000] [ffffea0004000000-ffffea0007ffffff] PMD -> [ffff8801fbe00000-ffff8801ffdfffff] on node 1
[ 0.000000] [ffffea0008000000-ffffea000bffffff] PMD -> [ffff8802fbe00000-ffff8802ffdfffff] on node 2
[ 0.000000] [ffffea000c000000-ffffea000fffffff] PMD -> [ffff8803fb400000-ffff8803ff3fffff] on node 3
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x3ffffefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbfff5fff]
[ 0.000000] node 1: [mem 0x100000000-0x1ffffffff]
[ 0.000000] node 2: [mem 0x200000000-0x2ffffffff]
[ 0.000000] node 3: [mem 0x300000000-0x3ffffefff]
[ 0.000000] On node 0 totalpages: 786324
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782326 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048575
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048575 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec10000, GSI 24-27
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28])
[ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec20000, GSI 28-31
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32])
[ 0.000000] IOAPIC[3]: apic_id 7, version 17, address 0xfdc00000, GSI 32-35
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36])
[ 0.000000] IOAPIC[4]: apic_id 8, version 17, address 0xfdc10000, GSI 36-39
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfdc20000] gsi_base[40])
[ 0.000000] IOAPIC[5]: apic_id 9, version 17, address 0xfdc20000, GSI 40-43
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfdc30000] gsi_base[44])
[ 0.000000] IOAPIC[6]: apic_id 10, version 17, address 0xfdc30000, GSI 44-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff6000-0xbfff6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff7000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfdbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc00000-0xfdc00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc01000-0xfdc0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc10000-0xfdc10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc11000-0xfdc1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc20000-0xfdc20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc21000-0xfdc2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc30000-0xfdc30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc31000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfdbfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:4
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bcc00000 s76032 r8192 d22272 u1048576
[ 0.000000] pcpu-alloc: s76032 r8192 d22272 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 4 [1] 1 5 [2] 2 6 [3] 3 7
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 3870590
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ fc7e000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 15332028K/15728204K available (6233K kernel code, 2939K rwdata, 1276K rodata, 872K init, 3348K bss, 396176K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2196.885 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.008219] Calibrating delay loop (skipped), value calculated using timer frequency.. 4393.77 BogoMIPS (lpj=8787540)
[ 0.008641] pid_max: default: 32768 minimum: 301
[ 0.011313] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.029485] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.037717] Mount-cache hash table entries: 256
[ 0.038357] Initializing cgroup subsys memory
[ 0.038592] Initializing cgroup subsys devices
[ 0.038787] Initializing cgroup subsys freezer
[ 0.038995] Initializing cgroup subsys net_cls
[ 0.039203] Initializing cgroup subsys blkio
[ 0.039407] Initializing cgroup subsys perf_event
[ 0.039607] Initializing cgroup subsys hugetlb
[ 0.039844] tseg: 0000000000
[ 0.040022] mce: CPU supports 5 MCE banks
[ 0.040242] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.040242] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.040242] tlb_flushall_shift: 4
[ 0.040825] Freeing SMP alternatives memory: 20K (ffffffff81dba000 - ffffffff81dbf000)
[ 0.041172] ACPI: Core revision 20131115
[ 0.045216] ACPI: All ACPI Tables successfully acquired
[ 0.046398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.086259] smpboot: CPU0: AMD Opteron (tm) Processor 848 (fam: 0f, model: 05, stepping: 08)
[ 0.088000] Performance Events: AMD PMU driver.
[ 0.088000] ... version: 0
[ 0.088000] ... bit width: 48
[ 0.088000] ... generic registers: 4
[ 0.088000] ... value mask: 0000ffffffffffff
[ 0.088000] ... max period: 00007fffffffffff
[ 0.088000] ... fixed-purpose events: 0
[ 0.088000] ... event mask: 000000000000000f
[ 0.088000] x86: Booting SMP configuration:
[ 0.097962] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088000] .... node #1, CPUs: #1
[ 0.176539] .... node #2, CPUs: #2
[ 0.264578] .... node #3, CPUs: #3
[ 0.352176] x86: Booted up 4 nodes, 4 CPUs
[ 0.352498] smpboot: Total of 4 processors activated (17577.45 BogoMIPS)
[ 0.354663] devtmpfs: initialized
[ 0.354663] gcov: version magic: 0x3430372a
[ 0.356285] NET: Registered protocol family 16
[ 0.356594] cpuidle: using governor ladder
[ 0.356762] cpuidle: using governor menu
[ 0.356936] node 0 link 0: io port [1000, 5fff]
[ 0.357107] node 1 link 0: io port [6000, ffff]
[ 0.357278] TOM: 00000000c0000000 aka 3072M
[ 0.357448] node 0 link 0: mmio [f5f00000, f7ffffff]
[ 0.357680] node 0 link 0: mmio [f5e00000, f5efffff]
[ 0.357910] node 0 link 0: mmio [a0000, bffff]
[ 0.358138] node 0 link 0: mmio [fe000000, ffffffff]
[ 0.358367] node 1 link 0: mmio [f8000000, fdffffff]
[ 0.358596] TOM2: 0000000400000000 aka 16384M
[ 0.358768] bus: [bus 00-03] on node 0 link 0
[ 0.358936] bus: 00 [io 0x0000-0x5fff]
[ 0.359102] bus: 00 [mem 0xc0000000-0xf7ffffff]
[ 0.359272] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.359440] bus: 00 [mem 0xfe000000-0xffffffff]
[ 0.359609] bus: 00 [mem 0x400000000-0xfcffffffff]
[ 0.359779] bus: [bus 04-08] on node 1 link 0
[ 0.360010] bus: 04 [io 0x6000-0xffff]
[ 0.360176] bus: 04 [mem 0xf8000000-0xfdffffff]
[ 0.360365] ACPI: bus type PCI registered
[ 0.360592] PCI: Using configuration type 1 for base access
[ 0.360979] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.361155] mtrr: probably your BIOS does not setup all CPUs.
[ 0.361329] mtrr: corrected configuration.
[ 0.362146] bio: create slab <bio-0> at 0
[ 0.362146] ACPI: Added _OSI(Module Device)
[ 0.362146] ACPI: Added _OSI(Processor Device)
[ 0.362146] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.362146] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.368545] ACPI: Interpreter enabled
[ 0.368721] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.369123] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.369523] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[ 0.369931] ACPI: (supports S0 S4 S5)
[ 0.370098] ACPI: Using IOAPIC for interrupt routing
[ 0.370317] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.378023] ACPI: PCI Root Bridge [CFG0] (domain 0000 [bus 00-03])
[ 0.378211] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.378392] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.380273] acpi PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.380456] acpi PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
[ 0.380637] acpi PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
[ 0.380819] acpi PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored)
[ 0.381001] acpi PNP0A03:00: host bridge window [io 0x1000-0x5fff] (ignored)
[ 0.381183] acpi PNP0A03:00: host bridge window [mem 0xf5f00000-0xf7ffffff] (ignored)
[ 0.381460] acpi PNP0A03:00: host bridge window [mem 0xf5e00000-0xf5efffff] (ignored)
[ 0.381736] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.382014] PCI: root bus 00: hardware-probed resources
[ 0.382197] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.382558] PCI host bridge to bus 0000:00
[ 0.382730] pci_bus 0000:00: root bus resource [bus 00-03]
[ 0.382905] pci_bus 0000:00: root bus resource [io 0x0000-0x5fff]
[ 0.383082] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff]
[ 0.383263] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.383444] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xffffffff]
[ 0.383624] pci_bus 0000:00: root bus resource [mem 0x400000000-0xfcffffffff]
[ 0.383829] pci 0000:00:03.0: [1022:7460] type 01 class 0x060400
[ 0.384173] pci 0000:00:04.0: [1022:7468] type 00 class 0x060100
[ 0.384473] pci 0000:00:04.1: [1022:7469] type 00 class 0x01018a
[ 0.384685] pci 0000:00:04.1: reg 0x20: [io 0x2000-0x200f]
[ 0.384938] pci 0000:00:04.3: [1022:746b] type 00 class 0x068000
[ 0.385248] pci 0000:00:07.0: [1022:7450] type 01 class 0x060400
[ 0.385533] pci 0000:00:07.1: [1022:7451] type 00 class 0x080010
[ 0.385811] pci 0000:00:08.0: [1022:7450] type 01 class 0x060400
[ 0.386090] pci 0000:00:08.1: [1022:7451] type 00 class 0x080010
[ 0.386387] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.386646] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.386895] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.387142] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.387390] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
[ 0.387654] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
[ 0.387904] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
[ 0.388071] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
[ 0.388326] pci 0000:00:1a.0: [1022:1100] type 00 class 0x060000
[ 0.388589] pci 0000:00:1a.1: [1022:1101] type 00 class 0x060000
[ 0.388836] pci 0000:00:1a.2: [1022:1102] type 00 class 0x060000
[ 0.389091] pci 0000:00:1a.3: [1022:1103] type 00 class 0x060000
[ 0.389337] pci 0000:00:1b.0: [1022:1100] type 00 class 0x060000
[ 0.389596] pci 0000:00:1b.1: [1022:1101] type 00 class 0x060000
[ 0.389843] pci 0000:00:1b.2: [1022:1102] type 00 class 0x060000
[ 0.390092] pci 0000:00:1b.3: [1022:1103] type 00 class 0x060000
[ 0.390413] pci 0000:01:00.0: [1022:7464] type 00 class 0x0c0310
[ 0.390603] pci 0000:01:00.0: reg 0x10: [mem 0xf7ef0000-0xf7ef0fff]
[ 0.392121] pci 0000:01:00.1: [1022:7464] type 00 class 0x0c0310
[ 0.392312] pci 0000:01:00.1: reg 0x10: [mem 0xf7ee0000-0xf7ee0fff]
[ 0.392617] pci 0000:01:02.0: [0e11:b203] type 00 class 0x088000
[ 0.392814] pci 0000:01:02.0: reg 0x10: [io 0x4800-0x48ff]
[ 0.392999] pci 0000:01:02.0: reg 0x14: [mem 0xf7eb0000-0xf7eb01ff]
[ 0.393324] pci 0000:01:02.2: [0e11:b204] type 00 class 0x088000
[ 0.393563] pci 0000:01:02.2: reg 0x10: [io 0x4000-0x40ff]
[ 0.393783] pci 0000:01:02.2: reg 0x14: [mem 0xf7ea0000-0xf7ea07ff]
[ 0.394014] pci 0000:01:02.2: reg 0x18: [mem 0xf7e90000-0xf7e91fff]
[ 0.394241] pci 0000:01:02.2: reg 0x1c: [mem 0xf7e00000-0xf7e7ffff]
[ 0.394493] pci 0000:01:02.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.394741] pci 0000:01:02.2: PME# supported from D0 D3hot D3cold
[ 0.395053] pci 0000:01:03.0: [1002:4752] type 00 class 0x030000
[ 0.395286] pci 0000:01:03.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.396028] pci 0000:01:03.0: reg 0x14: [io 0x4400-0x44ff]
[ 0.396213] pci 0000:01:03.0: reg 0x18: [mem 0xf5ff0000-0xf5ff0fff]
[ 0.396430] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.396640] pci 0000:01:03.0: supports D1 D2
[ 0.396902] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.397077] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.397257] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff]
[ 0.397520] pci 0000:02:04.0: [0e11:b178] type 00 class 0x010400
[ 0.397714] pci 0000:02:04.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.397899] pci 0000:02:04.0: reg 0x18: [io 0x5000-0x50ff]
[ 0.398082] pci 0000:02:04.0: reg 0x1c: [mem 0xf5ef0000-0xf5ef3fff 64bit pref]
[ 0.398366] pci 0000:02:04.0: reg 0x30: [mem 0x00000000-0x00003fff pref]
[ 0.398573] pci 0000:02:04.0: supports D1
[ 0.398815] pci 0000:02:06.0: [14e4:1648] type 00 class 0x020000
[ 0.399005] pci 0000:02:06.0: reg 0x10: [mem 0xf7fb0000-0xf7fbffff 64bit]
[ 0.399239] pci 0000:02:06.0: PME# supported from D3hot D3cold
[ 0.399488] pci 0000:02:06.1: [14e4:1648] type 00 class 0x020000
[ 0.399678] pci 0000:02:06.1: reg 0x10: [mem 0xf7fa0000-0xf7faffff 64bit]
[ 0.399913] pci 0000:02:06.1: PME# supported from D3hot D3cold
[ 0.400094] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.400270] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.400449] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.400632] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.401071] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 0.402282] ACPI: PCI Root Bridge [CFG1] (domain 0000 [bus 04-08])
[ 0.402463] acpi PNP0A03:01: _OSC: OS supports [Segments MSI]
[ 0.402643] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.404387] acpi PNP0A03:01: host bridge window [io 0x6000-0xffff] (ignored)
[ 0.404571] PCI: root bus 04: hardware-probed resources
[ 0.404745] acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.405085] PCI host bridge to bus 0000:04
[ 0.405255] pci_bus 0000:04: root bus resource [bus 04-08]
[ 0.405430] pci_bus 0000:04: root bus resource [io 0x6000-0xffff]
[ 0.405608] pci_bus 0000:04: root bus resource [mem 0xf8000000-0xfdffffff]
[ 0.405807] pci 0000:04:09.0: [1022:7450] type 01 class 0x060400
[ 0.406102] pci 0000:04:09.1: [1022:7451] type 00 class 0x080010
[ 0.406385] pci 0000:04:0a.0: [1022:7450] type 01 class 0x060400
[ 0.406672] pci 0000:04:0a.1: [1022:7451] type 00 class 0x080010
[ 0.406954] pci 0000:04:0b.0: [1022:7450] type 01 class 0x060400
[ 0.407228] pci 0000:04:0b.1: [1022:7451] type 00 class 0x080010
[ 0.407501] pci 0000:04:0c.0: [1022:7450] type 01 class 0x060400
[ 0.407774] pci 0000:04:0c.1: [1022:7451] type 00 class 0x080010
[ 0.408193] pci 0000:04:09.0: PCI bridge to [bus 05]
[ 0.408498] pci 0000:04:0a.0: PCI bridge to [bus 06]
[ 0.408835] pci 0000:04:0b.0: PCI bridge to [bus 07]
[ 0.409158] pci 0000:04:0c.0: PCI bridge to [bus 08]
[ 0.409581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *7 10 11)
[ 0.410230] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 *10 11)
[ 0.410875] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 *11)
[ 0.411519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11)
[ 0.412143] ACPI: \_SB_.CFG0: notify handler is installed
[ 0.412342] ACPI: \_SB_.CFG1: notify handler is installed
[ 0.412546] Found 2 acpi root devices
[ 0.412880] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.412880] vgaarb: loaded
[ 0.412880] vgaarb: bridge control possible 0000:01:03.0
[ 0.412880] SCSI subsystem initialized
[ 0.413010] PCI: Using ACPI for IRQ routing
[ 0.413180] PCI: pci_cache_line_size set to 64 bytes
[ 0.413435] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.413613] e820: reserve RAM buffer [mem 0xbfff6800-0xbfffffff]
[ 0.413789] e820: reserve RAM buffer [mem 0x3fffff000-0x3ffffffff]
[ 0.414281] Switched to clocksource refined-jiffies
[ 0.414281] pnp: PnP ACPI init
[ 0.414281] ACPI: bus type PNP registered
[ 0.416457] system 00:00: [io 0x0230-0x0233] has been reserved
[ 0.416639] system 00:00: [io 0x0260-0x0267] has been reserved
[ 0.416821] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.417002] system 00:00: [io 0x0800-0x081f] has been reserved
[ 0.417182] system 00:00: [io 0x0900-0x0903] has been reserved
[ 0.417363] system 00:00: [io 0x0904-0x0907] has been reserved
[ 0.417545] system 00:00: [io 0x0908-0x090b] has been reserved
[ 0.417726] system 00:00: [io 0x090c-0x092e] has been reserved
[ 0.417907] system 00:00: [io 0x092f] has been reserved
[ 0.418086] system 00:00: [io 0x0930-0x09ff] has been reserved
[ 0.418267] system 00:00: [io 0x0c80-0x0c87] has been reserved
[ 0.418449] system 00:00: [io 0x0cf9] could not be reserved
[ 0.418630] system 00:00: [io 0x02f8-0x02ff] has been reserved
[ 0.418817] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.419021] pnp 00:01: [dma 7]
[ 0.419224] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.419441] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.419697] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.420053] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.420371] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.420827] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.421307] pnp 00:07: [dma 2]
[ 0.421525] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.421964] pnp: PnP ACPI: found 8 devices
[ 0.422137] ACPI: bus type PNP unregistered
[ 0.429307] Switched to clocksource acpi_pm
[ 0.429307] pci 0000:00:03.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[ 0.429307] pci 0000:01:03.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.429307] pci 0000:01:02.2: BAR 6: assigned [mem 0xc0020000-0xc002ffff pref]
[ 0.429307] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.429481] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.429668] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff]
[ 0.429858] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xc00fffff pref]
[ 0.430151] pci 0000:02:04.0: BAR 6: assigned [mem 0xf5e00000-0xf5e03fff pref]
[ 0.430436] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.430616] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.430838] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.431028] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.431319] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 0.431507] pci_bus 0000:00: resource 4 [io 0x0000-0x5fff]
[ 0.431689] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xf7ffffff]
[ 0.431873] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.432072] pci_bus 0000:00: resource 7 [mem 0xfe000000-0xffffffff]
[ 0.432258] pci_bus 0000:00: resource 8 [mem 0x400000000-0xfcffffffff]
[ 0.432443] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.432624] pci_bus 0000:01: resource 1 [mem 0xf5f00000-0xf7efffff]
[ 0.432808] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc00fffff pref]
[ 0.432996] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.433178] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.433361] pci_bus 0000:02: resource 2 [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.433672] pci 0000:04:09.0: PCI bridge to [bus 05]
[ 0.433859] pci 0000:04:0a.0: PCI bridge to [bus 06]
[ 0.434046] pci 0000:04:0b.0: PCI bridge to [bus 07]
[ 0.434230] pci 0000:04:0c.0: PCI bridge to [bus 08]
[ 0.434415] pci_bus 0000:04: resource 4 [io 0x6000-0xffff]
[ 0.434597] pci_bus 0000:04: resource 5 [mem 0xf8000000-0xfdffffff]
[ 0.434943] NET: Registered protocol family 2
[ 0.435635] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.436996] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.437995] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.438308] TCP: reno registered
[ 0.438539] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438994] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.439623] NET: Registered protocol family 1
[ 0.439850] pci 0000:00:04.3: boot interrupts on device [1022:746b] already disabled
[ 0.440191] pci 0000:00:07.0: MSI quirk detected; subordinate MSI disabled
[ 0.440380] pci 0000:00:07.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.440573] pci 0000:00:08.0: MSI quirk detected; subordinate MSI disabled
[ 0.440760] pci 0000:00:08.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.584087] pci 0000:01:03.0: Boot video device
[ 0.584287] pci 0000:04:09.0: MSI quirk detected; subordinate MSI disabled
[ 0.584516] pci 0000:04:09.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.584753] pci 0000:04:0a.0: MSI quirk detected; subordinate MSI disabled
[ 0.584981] pci 0000:04:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.585218] pci 0000:04:0b.0: MSI quirk detected; subordinate MSI disabled
[ 0.585443] pci 0000:04:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.585677] pci 0000:04:0c.0: MSI quirk detected; subordinate MSI disabled
[ 0.585903] pci 0000:04:0c.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.586093] PCI: CLS 64 bytes, default 64
[ 0.589330] PCI-DMA: Disabling AGP.
[ 0.589875] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.590090] PCI-DMA: using GART IOMMU.
[ 0.590295] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.599674] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.617401] gcov: could not create file
[ 0.684694] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.689464] msgmni has been set to 30074
[ 0.690090] cryptomgr_test (65) used greatest stack depth: 7224 bytes left
[ 0.690359] cryptomgr_test (66) used greatest stack depth: 6840 bytes left
[ 0.690932] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.691293] io scheduler noop registered
[ 0.691507] io scheduler deadline registered
[ 0.691763] io scheduler cfq registered (default)
[ 0.692134] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.692523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.692890] ACPI: Power Button [PWRF]
[ 0.693183] ACPI: processor limited to max C-state 1
[ 0.693658] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.714472] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.763827] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.764812] Linux agpgart interface v0.103
[ 0.765016] HP CISS Driver (v 3.6.26)
[ 0.765605] cciss 0000:02:04.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date.
[ 0.964349] cciss 0000:02:04.0: cciss0: <0xb178> at PCI 0000:02:04.0 IRQ 18 using DAC
[ 0.967412] cciss/c0d0: p1 p2 < p5 >
[ 0.968125] scsi0 : cciss
[ 0.968593] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 0.970780] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.970963] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.971359] mousedev: PS/2 mouse device common for all mice
[ 0.971622] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.971997] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.972268] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram
[ 0.972659] TCP: cubic registered
[ 0.973034] NET: Registered protocol family 10
[ 0.973520] NET: Registered protocol family 17
[ 0.973705] Key type dns_resolver registered
[ 0.974399] registered taskstats version 1
[ 0.976689] rtc_cmos rtc_cmos: setting system clock to 2014-01-22 15:33:41 UTC (1390404821)
[ 1.022923] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.031144] EXT4-fs (cciss!c0d0p1): couldn't mount as ext3 due to feature incompatibilities
[ 1.031820] EXT4-fs (cciss!c0d0p1): couldn't mount as ext2 due to feature incompatibilities
[ 1.034725] EXT4-fs (cciss!c0d0p1): INFO: recovery required on readonly filesystem
[ 1.035002] EXT4-fs (cciss!c0d0p1): write access will be enabled during recovery
[ 1.081519] EXT4-fs (cciss!c0d0p1): recovery complete
[ 1.083430] EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.083802] VFS: Mounted root (ext4 filesystem) readonly on device 104:1.
[ 1.098495] devtmpfs: mounted
[ 1.100440] Freeing unused kernel memory: 872K (ffffffff81ce0000 - ffffffff81dba000)
[ 1.100761] Write protecting the kernel read-only data: 10240k
[ 1.108396] Freeing unused kernel memory: 1912K (ffff880001622000 - ffff880001800000)
[ 1.111602] Freeing unused kernel memory: 772K (ffff88000193f000 - ffff880001a00000)
[ 1.675465] modprobe (79) used greatest stack depth: 4664 bytes left
[ 2.414806] udevd[196]: starting version 175
[ 2.499868] mv (220) used greatest stack depth: 4648 bytes left
[ 2.738629] shpchp 0000:00:07.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.738945] shpchp 0000:00:07.0: Cannot reserve MMIO region
[ 2.739146] shpchp 0000:00:08.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.739459] shpchp 0000:00:08.0: Cannot reserve MMIO region
[ 2.739763] shpchp 0000:04:09.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.740193] shpchp 0000:04:09.0: Cannot reserve MMIO region
[ 2.743391] shpchp 0000:04:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.743690] shpchp 0000:04:0a.0: Cannot reserve MMIO region
[ 2.743986] shpchp 0000:04:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.744325] shpchp 0000:04:0b.0: Cannot reserve MMIO region
[ 2.744603] shpchp 0000:04:0c.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.744895] shpchp 0000:04:0c.0: Cannot reserve MMIO region
[ 2.745371] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.778828] Floppy drive(s): fd0 is 1.44M
[ 2.800978] FDC 0 is a National Semiconductor PC87306
[ 2.823899] ioapic: probe of 0000:00:07.1 failed with error -22
[ 2.824281] ioapic: probe of 0000:00:08.1 failed with error -22
[ 2.829318] ioapic: probe of 0000:04:09.1 failed with error -22
[ 2.829564] ioapic: probe of 0000:04:0a.1 failed with error -22
[ 2.829764] ioapic: probe of 0000:04:0b.1 failed with error -22
[ 2.829962] ioapic: probe of 0000:04:0c.1 failed with error -22
[ 2.839512] hpwdt 0000:01:02.0: This server does not have an iLO2+ ASIC.
[ 2.891602] EDAC MC: Ver: 3.0.0
[ 2.898151] libata version 3.00 loaded.
[ 2.902840] BUG: unable to handle kernel paging request at 00000000b4343e88
[ 2.903158] IP: [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.903408] PGD 0
[ 2.903510] AMD768 RNG detected
[ 2.903823] Oops: 0000 [#1] SMP
[ 2.904131] Modules linked in: amd_rng pata_amd(+) libata edac_core usb_common hpwdt ioapic k8temp floppy shpchp evdev
[ 2.905151] CPU: 3 PID: 323 Comm: modprobe Not tainted 3.13.0 #45
[ 2.905332] Hardware name: HP ProLiant DL585 G1, BIOS A01 02/14/2007
[ 2.905514] task: ffff8801f9f76600 ti: ffff8801f9d8e000 task.ti: ffff8801f9d8e000
[ 2.905793] RIP: 0010:[<ffffffff8109e31b>] [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.905883] RSP: 0018:ffff8801f9d8fd78 EFLAGS: 00010202
[ 2.905883] RAX: ffffffff81ba70c0 RBX: 00000000b4343e88 RCX: 0000000000001951
[ 2.905883] RDX: ffffffff81ac40a8 RSI: 00000000000149a0 RDI: 00000000b4343e88
[ 2.905883] RBP: ffffffffa0012718 R08: 00000000000149a0 R09: ffff8803ffa149a0
[ 2.905883] R10: ffffea000fe69680 R11: ffff8800b8803b00 R12: ffffffffa0012700
[ 2.905883] R13: ffff8801f9d8fe78 R14: 0000000000000000 R15: 0000000000000000
[ 2.905883] FS: 00007f387d0e7700(0000) GS:ffff8803ffa00000(0000) knlGS:0000000000000000
[ 2.905883] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.905883] CR2: 00000000b4343e88 CR3: 00000003f99fe000 CR4: 00000000000007e0
[ 2.905883] Stack:
[ 2.905883] ffffffff81ac40a0 ffffffff81607663 ffffffffa0011240 ffffffff8160772b
[ 2.905883] 0000000000000000 ffffffff81110ac5 0000000000000000 ffffffff810f7b2b
[ 2.908898] ffffffff810f4000 0000000000000000 0000000000000000 ffffffff00000003
[ 2.908898] Call Trace:
[ 2.908898] [<ffffffff81607663>] ? __mutex_unlock_slowpath+0x53/0x80
[ 2.908898] [<ffffffff8160772b>] ? mutex_unlock+0x2b/0x40
[ 2.908898] [<ffffffff81110ac5>] ? __gcov_init+0x65/0xb0
[ 2.908898] [<ffffffff810f7b2b>] ? load_module+0x223b/0x2710
[ 2.908898] [<ffffffff810f4000>] ? get_modinfo.isra.35+0x110/0x110
[ 2.908898] [<ffffffff8160a0f2>] ? page_fault+0x22/0x30
[ 2.908898] [<ffffffff810f80ee>] ? SyS_init_module+0xee/0x140
[ 2.908898] [<ffffffff816131a1>] ? tracesys+0xd4/0xd9
[ 2.908898] Code: 48 83 ec 08 31 d2 48 ff 05 13 58 da 00 e8 ae fb ff ff 48 ff 05 0f 58 da 00 48 83 c4 08 c3 66 90 48 ff 05 a9 54 da 00 53 48 89 fb <48> 8b 07 a8 0c 75 18 48 89 df 31 d2 be 03 00 00 00 e8 7f fb ff
[ 2.908898] RIP [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.908898] RSP <ffff8801f9d8fd78>
[ 2.908898] CR2: 00000000b4343e88
[ 2.916317] ---[ end trace 973dd11151d177ba ]---
[ 2.917618] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.946614] ACPI: bus type USB registered
[ 2.946891] usbcore: registered new interface driver usbfs
[ 2.947109] usbcore: registered new interface driver hub
[ 2.947510] usbcore: registered new device driver usb
[ 2.954139] pps_core: LinuxPPS API ver. 1 registered
[ 2.954339] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.966554] PTP clock support registered
[ 2.990198] tg3.c:v3.134 (Sep 16, 2013)
[ 3.003316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.007771] MCE: In-kernel MCE decoding enabled.
[ 3.029302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.039727] tg3 0000:02:06.0 eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e3
[ 3.040053] tg3 0000:02:06.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 3.040342] tg3 0000:02:06.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
[ 3.040620] tg3 0000:02:06.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 3.051824] AMD64 EDAC driver v3.4.0
[ 3.052083] EDAC amd64: DRAM ECC enabled.
[ 3.052259] EDAC amd64: K8 revE or earlier detected (node 0).
[ 3.052500] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 3.052677] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 3.053106] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 3.053506] EDAC amd64: DRAM ECC enabled.
[ 3.055500] EDAC amd64: K8 revE or earlier detected (node 1).
[ 3.055759] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 3.055945] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 3.056572] EDAC MC1: Giving out device to module amd64_edac controller K8: DEV 0000:00:19.2 (INTERRUPT)
[ 3.057060] EDAC amd64: DRAM ECC enabled.
[ 3.057280] EDAC amd64: K8 revE or earlier detected (node 2).
[ 3.057559] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 3.057742] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 3.058162] EDAC MC2: Giving out device to module amd64_edac controller K8: DEV 0000:00:1a.2 (INTERRUPT)
[ 3.058594] EDAC amd64: DRAM ECC enabled.
[ 3.058799] EDAC amd64: K8 revE or earlier detected (node 3).
[ 3.059088] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 3.059274] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 3.059742] EDAC MC3: Giving out device to module amd64_edac controller K8: DEV 0000:00:1b.2 (INTERRUPT)
[ 3.060252] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 3.104784] tg3 0000:02:06.1 eth1: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e2
[ 3.105083] tg3 0000:02:06.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 3.105368] tg3 0000:02:06.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 3.105645] tg3 0000:02:06.1 eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 3.107665] ohci-pci: OHCI PCI platform driver
[ 3.108335] ohci-pci 0000:01:00.0: OHCI PCI host controller
[ 3.108579] ohci-pci 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 3.108959] ohci-pci 0000:01:00.0: irq 19, io mem 0xf7ef0000
[ 3.166199] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.166393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.166667] usb usb1: Product: OHCI PCI host controller
[ 3.166849] usb usb1: Manufacturer: Linux 3.13.0 ohci_hcd
[ 3.167023] usb usb1: SerialNumber: 0000:01:00.0
[ 3.167465] hub 1-0:1.0: USB hub found
[ 3.167679] hub 1-0:1.0: 3 ports detected
[ 3.168438] ohci-pci 0000:01:00.1: OHCI PCI host controller
[ 3.168625] ohci-pci 0000:01:00.1: new USB bus registered, assigned bus number 2
[ 3.168935] ohci-pci 0000:01:00.1: irq 19, io mem 0xf7ee0000
[ 3.226121] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.226308] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.226658] usb usb2: Product: OHCI PCI host controller
[ 3.226863] usb usb2: Manufacturer: Linux 3.13.0 ohci_hcd
[ 3.227067] usb usb2: SerialNumber: 0000:01:00.1
[ 3.227459] hub 2-0:1.0: USB hub found
[ 3.227685] hub 2-0:1.0: 3 ports detected
[ 3.443046] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 3.601263] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.052221] random: nonblocking pool is initialized
[ 4.080996] Adding 2927612k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2927612k
[ 4.106768] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: (null)
[ 4.238578] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: errors=remount-ro
[ 4.440808] loop: module loaded
[ 5.898495] ip (1493) used greatest stack depth: 4264 bytes left
[ 6.332945] RPC: Registered named UNIX socket transport module.
[ 6.333233] RPC: Registered udp transport module.
[ 6.333403] RPC: Registered tcp transport module.
[ 6.333573] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.358649] FS-Cache: Loaded
[ 6.401705] FS-Cache: Netfs 'nfs' registered for caching
[ 6.467861] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.846236] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.086894] powernow-k8: Power state transitions not supported
[ 8.087107] powernow-k8: Power state transitions not supported
[ 8.087334] powernow-k8: Power state transitions not supported
[ 8.087561] powernow-k8: Power state transitions not supported
[ 8.470772] tg3 0000:02:06.0 eth0: Link is up at 100 Mbps, full duplex
[ 8.471071] tg3 0000:02:06.0 eth0: Flow control is on for TX and on for RX
[ 8.471307] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
================================
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0 (mroos@dl585) (gcc version 4.7.2 (Debian 4.7.2-5) ) #45 SMP Tue Jan 21 11:57:29 EET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro ignore_loglevel initcall_debug=1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfff67ff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfff6800-0x00000000bfffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000fdc00000-0x00000000fdc00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc10000-0x00000000fdc10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc20000-0x00000000fdc20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdc30000-0x00000000fdc30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ffffefff] usable
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: HP ProLiant DL585 G1, BIOS A01 02/14/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x3fffff max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0000000000 mask FF80000000 write-back
[ 0.000000] 2 base 0100000000 mask FF00000000 write-back
[ 0.000000] 3 base 0200000000 mask FE00000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfff6 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02106000, 0x02106fff] PGTABLE
[ 0.000000] BRK [0x02107000, 0x02107fff] PGTABLE
[ 0.000000] BRK [0x02108000, 0x02108fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3ffc00000-0x3ffdfffff]
[ 0.000000] [mem 0x3ffc00000-0x3ffdfffff] page 2M
[ 0.000000] BRK [0x02109000, 0x02109fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3fc000000-0x3ffbfffff]
[ 0.000000] [mem 0x3fc000000-0x3ffbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x380000000-0x3fbffffff]
[ 0.000000] [mem 0x380000000-0x3fbffffff] page 2M
[ 0.000000] BRK [0x0210a000, 0x0210afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfff5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfff5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x37fffffff]
[ 0.000000] [mem 0x100000000-0x37fffffff] page 2M
[ 0.000000] BRK [0x0210b000, 0x0210bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x3ffe00000-0x3ffffefff]
[ 0.000000] [mem 0x3ffe00000-0x3ffffefff] page 4k
[ 0.000000] ACPI: RSDP 00000000000f4f20 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bfff6c00 000044 (v01 HP A01 00000002 \xffffffd2? 0000162E)
[ 0.000000] ACPI: FACP 00000000bfff6c80 0000F4 (v03 HP A01 00000002 \xffffffd2? 0000162E)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20131115/tbfadt-653)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1bControlBlock: 32, using default 16 (20131115/tbfadt-653)
[ 0.000000] ACPI: DSDT 00000000bfff6d80 0051D5 (v01 HP DSDT 00000001 MSFT 02000001)
[ 0.000000] ACPI: FACS 00000000bfff68c0 000040
[ 0.000000] ACPI: APIC 00000000bfff6900 0000D0 (v01 HP 00000083 00000002 00000000)
[ 0.000000] ACPI: SPCR 00000000bfff6a00 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
[ 0.000000] ACPI: SRAT 00000000bfff6a80 000150 (v01 HP A01 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 0x01 -> Node 1
[ 0.000000] SRAT: PXM 3 -> APIC 0x02 -> Node 2
[ 0.000000] SRAT: PXM 4 -> APIC 0x03 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 1 [mem 0x00000000-0xffffffff]
[ 0.000000] SRAT: Node 1 PXM 2 [mem 0x100000000-0x1ffffffff]
[ 0.000000] SRAT: Node 2 PXM 3 [mem 0x200000000-0x2ffffffff]
[ 0.000000] SRAT: Node 3 PXM 4 [mem 0x300000000-0x3ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xffffffff]
[ 0.000000] NODE_DATA [mem 0xbfff3000-0xbfff5fff]
[ 0.000000] Initmem setup node 1 [mem 0x100000000-0x1ffffffff]
[ 0.000000] NODE_DATA [mem 0x1ffffd000-0x1ffffffff]
[ 0.000000] Initmem setup node 2 [mem 0x200000000-0x2ffffffff]
[ 0.000000] NODE_DATA [mem 0x2ffffd000-0x2ffffffff]
[ 0.000000] Initmem setup node 3 [mem 0x300000000-0x3ffffefff]
[ 0.000000] NODE_DATA [mem 0x3ffffc000-0x3ffffefff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bce00000-ffff8800bfdfffff] on node 0
[ 0.000000] [ffffea0004000000-ffffea0007ffffff] PMD -> [ffff8801fbe00000-ffff8801ffdfffff] on node 1
[ 0.000000] [ffffea0008000000-ffffea000bffffff] PMD -> [ffff8802fbe00000-ffff8802ffdfffff] on node 2
[ 0.000000] [ffffea000c000000-ffffea000fffffff] PMD -> [ffff8803fb400000-ffff8803ff3fffff] on node 3
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x3ffffefff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbfff5fff]
[ 0.000000] node 1: [mem 0x100000000-0x1ffffffff]
[ 0.000000] node 2: [mem 0x200000000-0x2ffffffff]
[ 0.000000] node 3: [mem 0x300000000-0x3ffffefff]
[ 0.000000] On node 0 totalpages: 786324
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12224 pages used for memmap
[ 0.000000] DMA32 zone: 782326 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048576 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048575
[ 0.000000] Normal zone: 16384 pages used for memmap
[ 0.000000] Normal zone: 1048575 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfec10000, GSI 24-27
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[28])
[ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfec20000, GSI 28-31
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfdc00000] gsi_base[32])
[ 0.000000] IOAPIC[3]: apic_id 7, version 17, address 0xfdc00000, GSI 32-35
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfdc10000] gsi_base[36])
[ 0.000000] IOAPIC[4]: apic_id 8, version 17, address 0xfdc10000, GSI 36-39
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfdc20000] gsi_base[40])
[ 0.000000] IOAPIC[5]: apic_id 9, version 17, address 0xfdc20000, GSI 40-43
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfdc30000] gsi_base[44])
[ 0.000000] IOAPIC[6]: apic_id 10, version 17, address 0xfdc30000, GSI 44-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff6000-0xbfff6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfff7000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfdbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc00000-0xfdc00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc01000-0xfdc0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc10000-0xfdc10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc11000-0xfdc1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc20000-0xfdc20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc21000-0xfdc2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc30000-0xfdc30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdc31000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfdbfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:4
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800bcc00000 s76032 r8192 d22272 u1048576
[ 0.000000] pcpu-alloc: s76032 r8192 d22272 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 4 [1] 1 5 [2] 2 6 [3] 3 7
[ 0.000000] Built 4 zonelists in Node order, mobility grouping on. Total pages: 3870590
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0 root=/dev/cciss/c0d0p1 ro ignore_loglevel initcall_debug=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 15332028K/15728204K available (6233K kernel code, 2939K rwdata, 1276K rodata, 872K init, 3348K bss, 396176K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:4352 nr_irqs:1152 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Enabling automatic NUMA balancing. Configure with numa_balancing= or sysctl
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2197.104 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.012223] Calibrating delay loop (skipped), value calculated using timer frequency.. 4394.20 BogoMIPS (lpj=8788416)
[ 0.012647] pid_max: default: 32768 minimum: 301
[ 0.015439] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.032956] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.041193] Mount-cache hash table entries: 256
[ 0.041819] Initializing cgroup subsys memory
[ 0.042062] Initializing cgroup subsys devices
[ 0.042270] Initializing cgroup subsys freezer
[ 0.042480] Initializing cgroup subsys net_cls
[ 0.042689] Initializing cgroup subsys blkio
[ 0.042891] Initializing cgroup subsys perf_event
[ 0.043095] Initializing cgroup subsys hugetlb
[ 0.043340] tseg: 0000000000
[ 0.043544] mce: CPU supports 5 MCE banks
[ 0.043765] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.043765] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.043765] tlb_flushall_shift: 4
[ 0.044110] Freeing SMP alternatives memory: 20K (ffffffff81dba000 - ffffffff81dbf000)
[ 0.044460] ACPI: Core revision 20131115
[ 0.048761] ACPI: All ACPI Tables successfully acquired
[ 0.050020] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089886] smpboot: CPU0: AMD Opteron (tm) Processor 848 (fam: 0f, model: 05, stepping: 08)
[ 0.092000] calling set_real_mode_permissions+0x0/0xbf @ 1
[ 0.092000] initcall set_real_mode_permissions+0x0/0xbf returned 0 after 0 usecs
[ 0.092000] calling init_hw_perf_events+0x0/0x6e0 @ 1
[ 0.092000] Performance Events: AMD PMU driver.
[ 0.092000] ... version: 0
[ 0.092000] ... bit width: 48
[ 0.092000] ... generic registers: 4
[ 0.092000] ... value mask: 0000ffffffffffff
[ 0.092000] ... max period: 00007fffffffffff
[ 0.092000] ... fixed-purpose events: 0
[ 0.092000] ... event mask: 000000000000000f
[ 0.092000] initcall init_hw_perf_events+0x0/0x6e0 returned 0 after 0 usecs
[ 0.092000] calling register_trigger_all_cpu_backtrace+0x0/0x21 @ 1
[ 0.092000] initcall register_trigger_all_cpu_backtrace+0x0/0x21 returned 0 after 0 usecs
[ 0.092000] calling spawn_ksoftirqd+0x0/0x46 @ 1
[ 0.092000] initcall spawn_ksoftirqd+0x0/0x46 returned 0 after 0 usecs
[ 0.092000] calling init_workqueues+0x0/0x773 @ 1
[ 0.092000] initcall init_workqueues+0x0/0x773 returned 0 after 0 usecs
[ 0.092006] calling migration_init+0x0/0x9d @ 1
[ 0.092209] initcall migration_init+0x0/0x9d returned 0 after 0 usecs
[ 0.092430] calling check_cpu_stall_init+0x0/0x26 @ 1
[ 0.092643] initcall check_cpu_stall_init+0x0/0x26 returned 0 after 0 usecs
[ 0.092848] calling rcu_register_oom_notifier+0x0/0x1f @ 1
[ 0.093068] initcall rcu_register_oom_notifier+0x0/0x1f returned 0 after 0 usecs
[ 0.093413] calling rcu_scheduler_really_started+0x0/0x14 @ 1
[ 0.093631] initcall rcu_scheduler_really_started+0x0/0x14 returned 0 after 0 usecs
[ 0.093974] calling rcu_spawn_gp_kthread+0x0/0x1a5 @ 1
[ 0.094565] initcall rcu_spawn_gp_kthread+0x0/0x1a5 returned 0 after 0 usecs
[ 0.094785] calling cpu_stop_init+0x0/0xa5 @ 1
[ 0.095024] initcall cpu_stop_init+0x0/0xa5 returned 0 after 0 usecs
[ 0.095246] calling jump_label_init_module+0x0/0x1d @ 1
[ 0.095460] initcall jump_label_init_module+0x0/0x1d returned 0 after 0 usecs
[ 0.095686] calling rand_initialize+0x0/0x50 @ 1
[ 0.096030] initcall rand_initialize+0x0/0x50 returned 0 after 0 usecs
[ 0.096456] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096971] x86: Booting SMP configuration:
[ 0.097178] .... node #1, CPUs: #1
[ 0.188602] .... node #2, CPUs: #2
[ 0.276537] .... node #3, CPUs: #3
[ 0.364163] x86: Booted up 4 nodes, 4 CPUs
[ 0.364485] smpboot: Total of 4 processors activated (17577.91 BogoMIPS)
[ 0.366624] devtmpfs: initialized
[ 0.366624] gcov: version magic: 0x3430372a
[ 0.366624] calling ipc_ns_init+0x0/0x21 @ 1
[ 0.368028] initcall ipc_ns_init+0x0/0x21 returned 0 after 0 usecs
[ 0.368208] calling init_mmap_min_addr+0x0/0x18 @ 1
[ 0.368382] initcall init_mmap_min_addr+0x0/0x18 returned 0 after 0 usecs
[ 0.368566] calling init_cpufreq_transition_notifier_list+0x0/0x26 @ 1
[ 0.368751] initcall init_cpufreq_transition_notifier_list+0x0/0x26 returned 0 after 0 usecs
[ 0.369031] calling net_ns_init+0x0/0x167 @ 1
[ 0.369336] initcall net_ns_init+0x0/0x167 returned 0 after 0 usecs
[ 0.369336] calling e820_mark_nvs_memory+0x0/0x52 @ 1
[ 0.369336] initcall e820_mark_nvs_memory+0x0/0x52 returned 0 after 0 usecs
[ 0.369336] calling cpufreq_tsc+0x0/0x4c @ 1
[ 0.369336] initcall cpufreq_tsc+0x0/0x4c returned 0 after 0 usecs
[ 0.369336] calling reboot_init+0x0/0x32 @ 1
[ 0.369336] initcall reboot_init+0x0/0x32 returned 0 after 0 usecs
[ 0.369336] calling init_lapic_sysfs+0x0/0x36 @ 1
[ 0.369471] initcall init_lapic_sysfs+0x0/0x36 returned 0 after 0 usecs
[ 0.369651] calling cpu_hotplug_pm_sync_init+0x0/0x1f @ 1
[ 0.369827] initcall cpu_hotplug_pm_sync_init+0x0/0x1f returned 0 after 0 usecs
[ 0.370101] calling alloc_frozen_cpus+0x0/0xa @ 1
[ 0.370272] initcall alloc_frozen_cpus+0x0/0xa returned 0 after 0 usecs
[ 0.370451] calling wq_sysfs_init+0x0/0x1f @ 1
[ 0.372044] initcall wq_sysfs_init+0x0/0x1f returned 0 after 0 usecs
[ 0.372224] calling ksysfs_init+0x0/0xe6 @ 1
[ 0.372399] initcall ksysfs_init+0x0/0xe6 returned 0 after 0 usecs
[ 0.372577] calling pm_init+0x0/0xca @ 1
[ 0.372781] initcall pm_init+0x0/0xca returned 0 after 0 usecs
[ 0.372960] calling pm_disk_init+0x0/0x25 @ 1
[ 0.373135] initcall pm_disk_init+0x0/0x25 returned 0 after 0 usecs
[ 0.373315] calling swsusp_header_init+0x0/0x50 @ 1
[ 0.373489] initcall swsusp_header_init+0x0/0x50 returned 0 after 0 usecs
[ 0.373670] calling init_jiffies_clocksource+0x0/0x1d @ 1
[ 0.373848] initcall init_jiffies_clocksource+0x0/0x1d returned 0 after 0 usecs
[ 0.374121] calling cgroup_wq_init+0x0/0x49 @ 1
[ 0.374308] initcall cgroup_wq_init+0x0/0x49 returned 0 after 0 usecs
[ 0.374488] calling init_zero_pfn+0x0/0x42 @ 1
[ 0.374660] initcall init_zero_pfn+0x0/0x42 returned 0 after 0 usecs
[ 0.374839] calling memory_failure_init+0x0/0xc8 @ 1
[ 0.375013] initcall memory_failure_init+0x0/0xc8 returned 0 after 0 usecs
[ 0.375193] calling fsnotify_init+0x0/0x38 @ 1
[ 0.375365] initcall fsnotify_init+0x0/0x38 returned 0 after 0 usecs
[ 0.375543] calling filelock_init+0x0/0xaf @ 1
[ 0.375717] initcall filelock_init+0x0/0xaf returned 0 after 0 usecs
[ 0.375895] calling init_script_binfmt+0x0/0x2f @ 1
[ 0.376010] initcall init_script_binfmt+0x0/0x2f returned 0 after 0 usecs
[ 0.376190] calling init_elf_binfmt+0x0/0x30 @ 1
[ 0.376362] initcall init_elf_binfmt+0x0/0x30 returned 0 after 0 usecs
[ 0.376542] calling init_compat_elf_binfmt+0x0/0x31 @ 1
[ 0.376717] initcall init_compat_elf_binfmt+0x0/0x31 returned 0 after 0 usecs
[ 0.376898] calling debugfs_init+0x0/0x86 @ 1
[ 0.377072] initcall debugfs_init+0x0/0x86 returned 0 after 0 usecs
[ 0.377250] calling prandom_init+0x0/0x100 @ 1
[ 0.377424] initcall prandom_init+0x0/0x100 returned 0 after 0 usecs
[ 0.377602] calling cpufreq_core_init+0x0/0x5f @ 1
[ 0.377775] initcall cpufreq_core_init+0x0/0x5f returned 0 after 0 usecs
[ 0.377955] calling cpuidle_init+0x0/0x69 @ 1
[ 0.378129] initcall cpuidle_init+0x0/0x69 returned 0 after 0 usecs
[ 0.378307] calling bsp_pm_check_init+0x0/0x1f @ 1
[ 0.378479] initcall bsp_pm_check_init+0x0/0x1f returned 0 after 0 usecs
[ 0.378659] calling sock_init+0x0/0xec @ 1
[ 0.378921] initcall sock_init+0x0/0xec returned 0 after 0 usecs
[ 0.379140] calling net_inuse_init+0x0/0x38 @ 1
[ 0.379354] initcall net_inuse_init+0x0/0x38 returned 0 after 0 usecs
[ 0.380006] calling netpoll_init+0x0/0x32 @ 1
[ 0.380214] initcall netpoll_init+0x0/0x32 returned 0 after 0 usecs
[ 0.380433] calling netlink_proto_init+0x0/0x2b1 @ 1
[ 0.380652] NET: Registered protocol family 16
[ 0.380877] initcall netlink_proto_init+0x0/0x2b1 returned 0 after 0 usecs
[ 0.381101] calling bdi_class_init+0x0/0x72 @ 1
[ 0.381353] initcall bdi_class_init+0x0/0x72 returned 0 after 0 usecs
[ 0.381574] calling kobject_uevent_init+0x0/0x1d @ 1
[ 0.381780] initcall kobject_uevent_init+0x0/0x1d returned 0 after 0 usecs
[ 0.381993] calling pcibus_class_init+0x0/0x24 @ 1
[ 0.384028] initcall pcibus_class_init+0x0/0x24 returned 0 after 0 usecs
[ 0.384251] calling pci_driver_init+0x0/0x1d @ 1
[ 0.384472] initcall pci_driver_init+0x0/0x1d returned 0 after 0 usecs
[ 0.384689] calling tty_class_init+0x0/0x48 @ 1
[ 0.384905] initcall tty_class_init+0x0/0x48 returned 0 after 0 usecs
[ 0.385118] calling vtconsole_class_init+0x0/0x129 @ 1
[ 0.385361] initcall vtconsole_class_init+0x0/0x129 returned 0 after 0 usecs
[ 0.385585] calling wakeup_sources_debugfs_init+0x0/0x36 @ 1
[ 0.385803] initcall wakeup_sources_debugfs_init+0x0/0x36 returned 0 after 0 usecs
[ 0.386148] calling register_node_type+0x0/0x24 @ 1
[ 0.386378] initcall register_node_type+0x0/0x24 returned 0 after 0 usecs
[ 0.386600] calling init_ladder+0x0/0x1f @ 1
[ 0.386802] cpuidle: using governor ladder
[ 0.387005] initcall init_ladder+0x0/0x1f returned 0 after 0 usecs
[ 0.387222] calling init_menu+0x0/0x1d @ 1
[ 0.387424] cpuidle: using governor menu
[ 0.387629] initcall init_menu+0x0/0x1d returned 0 after 0 usecs
[ 0.387824] calling amd_postcore_init+0x0/0x1ed @ 1
[ 0.388012] node 0 link 0: io port [1000, 5fff]
[ 0.388223] node 1 link 0: io port [6000, ffff]
[ 0.388435] TOM: 00000000c0000000 aka 3072M
[ 0.388646] node 0 link 0: mmio [f5f00000, f7ffffff]
[ 0.388909] node 0 link 0: mmio [f5e00000, f5efffff]
[ 0.389182] node 0 link 0: mmio [a0000, bffff]
[ 0.389453] node 0 link 0: mmio [fe000000, ffffffff]
[ 0.389726] node 1 link 0: mmio [f8000000, fdffffff]
[ 0.389990] TOM2: 0000000400000000 aka 16384M
[ 0.390196] bus: [bus 00-03] on node 0 link 0
[ 0.390401] bus: 00 [io 0x0000-0x5fff]
[ 0.390604] bus: 00 [mem 0xc0000000-0xf7ffffff]
[ 0.390809] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.391015] bus: 00 [mem 0xfe000000-0xffffffff]
[ 0.391218] bus: 00 [mem 0x400000000-0xfcffffffff]
[ 0.391427] bus: [bus 04-08] on node 1 link 0
[ 0.391635] bus: 04 [io 0x6000-0xffff]
[ 0.391828] bus: 04 [mem 0xf8000000-0xfdffffff]
[ 0.392006] initcall amd_postcore_init+0x0/0x1ed returned 0 after 3906 usecs
[ 0.392243] calling arch_kdebugfs_init+0x0/0x3b @ 1
[ 0.392459] initcall arch_kdebugfs_init+0x0/0x3b returned 0 after 0 usecs
[ 0.392680] calling mtrr_if_init+0x0/0x9a @ 1
[ 0.392891] initcall mtrr_if_init+0x0/0x9a returned 0 after 0 usecs
[ 0.393109] calling ffh_cstate_init+0x0/0x3f @ 1
[ 0.393320] initcall ffh_cstate_init+0x0/0x3f returned -1 after 0 usecs
[ 0.393543] calling acpi_pci_init+0x0/0xa1 @ 1
[ 0.393741] ACPI: bus type PCI registered
[ 0.393949] initcall acpi_pci_init+0x0/0xa1 returned 0 after 0 usecs
[ 0.394170] calling dmi_id_init+0x0/0x4d4 @ 1
[ 0.394419] initcall dmi_id_init+0x0/0x4d4 returned 0 after 0 usecs
[ 0.394639] calling iommu_init+0x0/0x7d @ 1
[ 0.394832] initcall iommu_init+0x0/0x7d returned 0 after 0 usecs
[ 0.395049] calling pci_arch_init+0x0/0xbc @ 1
[ 0.395270] PCI: Using configuration type 1 for base access
[ 0.395491] initcall pci_arch_init+0x0/0xbc returned 0 after 0 usecs
[ 0.395721] calling topology_init+0x0/0xe9 @ 1
[ 0.396219] initcall topology_init+0x0/0xe9 returned 0 after 0 usecs
[ 0.396439] calling mtrr_init_finialize+0x0/0x64 @ 1
[ 0.396652] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.396860] mtrr: probably your BIOS does not setup all CPUs.
[ 0.397077] mtrr: corrected configuration.
[ 0.397285] initcall mtrr_init_finialize+0x0/0x64 returned 0 after 0 usecs
[ 0.397507] calling init_vdso+0x0/0x27e @ 1
[ 0.397720] initcall init_vdso+0x0/0x27e returned 0 after 0 usecs
[ 0.397938] calling sysenter_setup+0x0/0x2d8 @ 1
[ 0.398153] initcall sysenter_setup+0x0/0x2d8 returned 0 after 0 usecs
[ 0.398364] calling param_sysfs_init+0x0/0x296 @ 1
[ 0.399081] initcall param_sysfs_init+0x0/0x296 returned 0 after 0 usecs
[ 0.399296] calling pm_sysrq_init+0x0/0x24 @ 1
[ 0.399507] initcall pm_sysrq_init+0x0/0x24 returned 0 after 0 usecs
[ 0.399723] calling default_bdi_init+0x0/0x93 @ 1
[ 0.400153] initcall default_bdi_init+0x0/0x93 returned 0 after 3906 usecs
[ 0.400341] calling mem_cgroup_init+0x0/0x2a3 @ 1
[ 0.400579] initcall mem_cgroup_init+0x0/0x2a3 returned 0 after 0 usecs
[ 0.400799] calling init_bio+0x0/0x193 @ 1
[ 0.401012] bio: create slab <bio-0> at 0
[ 0.401302] initcall init_bio+0x0/0x193 returned 0 after 0 usecs
[ 0.401302] calling fsnotify_notification_init+0x0/0xad @ 1
[ 0.401302] initcall fsnotify_notification_init+0x0/0xad returned 0 after 0 usecs
[ 0.401302] calling cryptomgr_init+0x0/0x1d @ 1
[ 0.401302] initcall cryptomgr_init+0x0/0x1d returned 0 after 0 usecs
[ 0.401302] calling blk_settings_init+0x0/0x2c @ 1
[ 0.401414] initcall blk_settings_init+0x0/0x2c returned 0 after 0 usecs
[ 0.401630] calling blk_ioc_init+0x0/0x35 @ 1
[ 0.401842] initcall blk_ioc_init+0x0/0x35 returned 0 after 0 usecs
[ 0.402060] calling blk_softirq_init+0x0/0x99 @ 1
[ 0.402260] initcall blk_softirq_init+0x0/0x99 returned 0 after 0 usecs
[ 0.404007] calling blk_iopoll_setup+0x0/0x99 @ 1
[ 0.404220] initcall blk_iopoll_setup+0x0/0x99 returned 0 after 0 usecs
[ 0.404429] calling blk_mq_init+0x0/0x8c @ 1
[ 0.404636] initcall blk_mq_init+0x0/0x8c returned 0 after 0 usecs
[ 0.404853] calling genhd_device_init+0x0/0xa2 @ 1
[ 0.405129] initcall genhd_device_init+0x0/0xa2 returned 0 after 0 usecs
[ 0.405129] calling pci_slot_init+0x0/0x70 @ 1
[ 0.405129] initcall pci_slot_init+0x0/0x70 returned 0 after 0 usecs
[ 0.405129] calling acpi_init+0x0/0x3f1 @ 1
[ 0.405129] ACPI: Added _OSI(Module Device)
[ 0.405180] ACPI: Added _OSI(Processor Device)
[ 0.405357] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.405528] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.411943] ACPI: Interpreter enabled
[ 0.412014] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.412416] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.412816] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[ 0.413225] ACPI: (supports S0 S4 S5)
[ 0.413391] ACPI: Using IOAPIC for interrupt routing
[ 0.413608] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.421877] ACPI: PCI Root Bridge [CFG0] (domain 0000 [bus 00-03])
[ 0.422064] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.422247] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.424209] acpi PNP0A03:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.424391] acpi PNP0A03:00: host bridge window [io 0x03b0-0x03bb] (ignored)
[ 0.424573] acpi PNP0A03:00: host bridge window [io 0x03c0-0x03df] (ignored)
[ 0.424754] acpi PNP0A03:00: host bridge window [io 0x03e0-0x0fff] (ignored)
[ 0.424936] acpi PNP0A03:00: host bridge window [io 0x1000-0x5fff] (ignored)
[ 0.425120] acpi PNP0A03:00: host bridge window [mem 0xf5f00000-0xf7ffffff] (ignored)
[ 0.425397] acpi PNP0A03:00: host bridge window [mem 0xf5e00000-0xf5efffff] (ignored)
[ 0.425674] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.425953] PCI: root bus 00: hardware-probed resources
[ 0.426134] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.426502] PCI host bridge to bus 0000:00
[ 0.426675] pci_bus 0000:00: root bus resource [bus 00-03]
[ 0.426850] pci_bus 0000:00: root bus resource [io 0x0000-0x5fff]
[ 0.427028] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf7ffffff]
[ 0.427208] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.427389] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xffffffff]
[ 0.427569] pci_bus 0000:00: root bus resource [mem 0x400000000-0xfcffffffff]
[ 0.427774] pci 0000:00:03.0: [1022:7460] type 01 class 0x060400
[ 0.428143] pci 0000:00:04.0: [1022:7468] type 00 class 0x060100
[ 0.428453] pci 0000:00:04.1: [1022:7469] type 00 class 0x01018a
[ 0.428668] pci 0000:00:04.1: reg 0x20: [io 0x2000-0x200f]
[ 0.428925] pci 0000:00:04.3: [1022:746b] type 00 class 0x068000
[ 0.429238] pci 0000:00:07.0: [1022:7450] type 01 class 0x060400
[ 0.429524] pci 0000:00:07.1: [1022:7451] type 00 class 0x080010
[ 0.429804] pci 0000:00:08.0: [1022:7450] type 01 class 0x060400
[ 0.430080] pci 0000:00:08.1: [1022:7451] type 00 class 0x080010
[ 0.430385] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.430643] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.430898] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.431146] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.431400] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
[ 0.431666] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
[ 0.431916] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
[ 0.432076] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
[ 0.432333] pci 0000:00:1a.0: [1022:1100] type 00 class 0x060000
[ 0.432597] pci 0000:00:1a.1: [1022:1101] type 00 class 0x060000
[ 0.432848] pci 0000:00:1a.2: [1022:1102] type 00 class 0x060000
[ 0.433100] pci 0000:00:1a.3: [1022:1103] type 00 class 0x060000
[ 0.433354] pci 0000:00:1b.0: [1022:1100] type 00 class 0x060000
[ 0.433615] pci 0000:00:1b.1: [1022:1101] type 00 class 0x060000
[ 0.433868] pci 0000:00:1b.2: [1022:1102] type 00 class 0x060000
[ 0.434118] pci 0000:00:1b.3: [1022:1103] type 00 class 0x060000
[ 0.434444] pci 0000:01:00.0: [1022:7464] type 00 class 0x0c0310
[ 0.434634] pci 0000:01:00.0: reg 0x10: [mem 0xf7ef0000-0xf7ef0fff]
[ 0.434928] pci 0000:01:00.1: [1022:7464] type 00 class 0x0c0310
[ 0.435120] pci 0000:01:00.1: reg 0x10: [mem 0xf7ee0000-0xf7ee0fff]
[ 0.435425] pci 0000:01:02.0: [0e11:b203] type 00 class 0x088000
[ 0.435620] pci 0000:01:02.0: reg 0x10: [io 0x4800-0x48ff]
[ 0.435805] pci 0000:01:02.0: reg 0x14: [mem 0xf7eb0000-0xf7eb01ff]
[ 0.436143] pci 0000:01:02.2: [0e11:b204] type 00 class 0x088000
[ 0.436341] pci 0000:01:02.2: reg 0x10: [io 0x4000-0x40ff]
[ 0.436527] pci 0000:01:02.2: reg 0x14: [mem 0xf7ea0000-0xf7ea07ff]
[ 0.438422] pci 0000:01:02.2: reg 0x18: [mem 0xf7e90000-0xf7e91fff]
[ 0.438609] pci 0000:01:02.2: reg 0x1c: [mem 0xf7e00000-0xf7e7ffff]
[ 0.438818] pci 0000:01:02.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.439032] pci 0000:01:02.2: PME# supported from D0 D3hot D3cold
[ 0.439297] pci 0000:01:03.0: [1002:4752] type 00 class 0x030000
[ 0.439492] pci 0000:01:03.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.439680] pci 0000:01:03.0: reg 0x14: [io 0x4400-0x44ff]
[ 0.439864] pci 0000:01:03.0: reg 0x18: [mem 0xf5ff0000-0xf5ff0fff]
[ 0.440045] pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.440259] pci 0000:01:03.0: supports D1 D2
[ 0.440518] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.440694] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.440874] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff]
[ 0.441127] pci 0000:02:04.0: [0e11:b178] type 00 class 0x010400
[ 0.441322] pci 0000:02:04.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.441507] pci 0000:02:04.0: reg 0x18: [io 0x5000-0x50ff]
[ 0.441690] pci 0000:02:04.0: reg 0x1c: [mem 0xf5ef0000-0xf5ef3fff 64bit pref]
[ 0.441974] pci 0000:02:04.0: reg 0x30: [mem 0x00000000-0x00003fff pref]
[ 0.442183] pci 0000:02:04.0: supports D1
[ 0.442422] pci 0000:02:06.0: [14e4:1648] type 00 class 0x020000
[ 0.442612] pci 0000:02:06.0: reg 0x10: [mem 0xf7fb0000-0xf7fbffff 64bit]
[ 0.442847] pci 0000:02:06.0: PME# supported from D3hot D3cold
[ 0.443092] pci 0000:02:06.1: [14e4:1648] type 00 class 0x020000
[ 0.443282] pci 0000:02:06.1: reg 0x10: [mem 0xf7fa0000-0xf7faffff 64bit]
[ 0.443517] pci 0000:02:06.1: PME# supported from D3hot D3cold
[ 0.443780] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.444009] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.444189] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.444372] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.444815] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 0.446032] ACPI: PCI Root Bridge [CFG1] (domain 0000 [bus 04-08])
[ 0.446363] acpi PNP0A03:01: _OSC: OS supports [Segments MSI]
[ 0.446543] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.448241] acpi PNP0A03:01: host bridge window [io 0x6000-0xffff] (ignored)
[ 0.448425] PCI: root bus 04: hardware-probed resources
[ 0.448600] acpi PNP0A03:01: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.448941] PCI host bridge to bus 0000:04
[ 0.449110] pci_bus 0000:04: root bus resource [bus 04-08]
[ 0.449286] pci_bus 0000:04: root bus resource [io 0x6000-0xffff]
[ 0.449463] pci_bus 0000:04: root bus resource [mem 0xf8000000-0xfdffffff]
[ 0.449664] pci 0000:04:09.0: [1022:7450] type 01 class 0x060400
[ 0.449957] pci 0000:04:09.1: [1022:7451] type 00 class 0x080010
[ 0.450242] pci 0000:04:0a.0: [1022:7450] type 01 class 0x060400
[ 0.450528] pci 0000:04:0a.1: [1022:7451] type 00 class 0x080010
[ 0.450814] pci 0000:04:0b.0: [1022:7450] type 01 class 0x060400
[ 0.451088] pci 0000:04:0b.1: [1022:7451] type 00 class 0x080010
[ 0.451365] pci 0000:04:0c.0: [1022:7450] type 01 class 0x060400
[ 0.451639] pci 0000:04:0c.1: [1022:7451] type 00 class 0x080010
[ 0.452051] pci 0000:04:09.0: PCI bridge to [bus 05]
[ 0.452361] pci 0000:04:0a.0: PCI bridge to [bus 06]
[ 0.452706] pci 0000:04:0b.0: PCI bridge to [bus 07]
[ 0.453039] pci 0000:04:0c.0: PCI bridge to [bus 08]
[ 0.453472] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *7 10 11)
[ 0.454124] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 7 *10 11)
[ 0.454770] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 7 10 *11)
[ 0.455416] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *5 7 10 11)
[ 0.456161] ACPI: \_SB_.CFG0: notify handler is installed
[ 0.456361] ACPI: \_SB_.CFG1: notify handler is installed
[ 0.456565] Found 2 acpi root devices
[ 0.456809] initcall acpi_init+0x0/0x3f1 returned 0 after 50781 usecs
[ 0.456990] calling pnp_init+0x0/0x1d @ 1
[ 0.457172] initcall pnp_init+0x0/0x1d returned 0 after 0 usecs
[ 0.457349] calling misc_init+0x0/0x116 @ 1
[ 0.457535] initcall misc_init+0x0/0x116 returned 0 after 0 usecs
[ 0.457714] calling vga_arb_device_init+0x0/0x147 @ 1
[ 0.457957] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.457957] vgaarb: loaded
[ 0.457957] vgaarb: bridge control possible 0000:01:03.0
[ 0.457957] initcall vga_arb_device_init+0x0/0x147 returned 0 after 0 usecs
[ 0.457957] calling dma_buf_init+0x0/0xa4 @ 1
[ 0.457957] initcall dma_buf_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.457957] calling init_scsi+0x0/0xfd @ 1
[ 0.457957] SCSI subsystem initialized
[ 0.457957] initcall init_scsi+0x0/0xfd returned 0 after 0 usecs
[ 0.457957] calling serio_init+0x0/0x43 @ 1
[ 0.460009] initcall serio_init+0x0/0x43 returned 0 after 3906 usecs
[ 0.460190] calling input_init+0x0/0x1ac @ 1
[ 0.460371] initcall input_init+0x0/0x1ac returned 0 after 0 usecs
[ 0.460548] calling rtc_init+0x0/0x82 @ 1
[ 0.460722] initcall rtc_init+0x0/0x82 returned 0 after 0 usecs
[ 0.460899] calling power_supply_class_init+0x0/0x5b @ 1
[ 0.461079] initcall power_supply_class_init+0x0/0x5b returned 0 after 0 usecs
[ 0.461351] calling hwmon_init+0x0/0x19a @ 1
[ 0.461532] initcall hwmon_init+0x0/0x19a returned 0 after 0 usecs
[ 0.461709] calling watchdog_init+0x0/0x95 @ 1
[ 0.461885] initcall watchdog_init+0x0/0x95 returned 0 after 0 usecs
[ 0.462063] calling leds_init+0x0/0x50 @ 1
[ 0.462237] initcall leds_init+0x0/0x50 returned 0 after 0 usecs
[ 0.462415] calling pci_subsys_init+0x0/0x90 @ 1
[ 0.462586] PCI: Using ACPI for IRQ routing
[ 0.462755] PCI: pci_cache_line_size set to 64 bytes
[ 0.463014] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.463192] e820: reserve RAM buffer [mem 0xbfff6800-0xbfffffff]
[ 0.463369] e820: reserve RAM buffer [mem 0x3fffff000-0x3ffffffff]
[ 0.463551] initcall pci_subsys_init+0x0/0x90 returned 0 after 0 usecs
[ 0.463730] calling proto_init+0x0/0x1d @ 1
[ 0.463903] initcall proto_init+0x0/0x1d returned 0 after 0 usecs
[ 0.464007] calling net_dev_init+0x0/0x2e1 @ 1
[ 0.464338] initcall net_dev_init+0x0/0x2e1 returned 0 after 0 usecs
[ 0.464517] calling neigh_init+0x0/0xa7 @ 1
[ 0.464687] initcall neigh_init+0x0/0xa7 returned 0 after 0 usecs
[ 0.464864] calling fib_rules_init+0x0/0xf9 @ 1
[ 0.465036] initcall fib_rules_init+0x0/0xf9 returned 0 after 0 usecs
[ 0.465214] calling pktsched_init+0x0/0x169 @ 1
[ 0.465390] initcall pktsched_init+0x0/0x169 returned 0 after 0 usecs
[ 0.465568] calling tc_filter_init+0x0/0x6e @ 1
[ 0.465740] initcall tc_filter_init+0x0/0x6e returned 0 after 0 usecs
[ 0.465918] calling tc_action_init+0x0/0x6e @ 1
[ 0.466089] initcall tc_action_init+0x0/0x6e returned 0 after 0 usecs
[ 0.466268] calling genl_init+0x0/0xc5 @ 1
[ 0.466446] initcall genl_init+0x0/0xc5 returned 0 after 0 usecs
[ 0.466644] calling nmi_warning_debugfs+0x0/0x32 @ 1
[ 0.466821] initcall nmi_warning_debugfs+0x0/0x32 returned 0 after 0 usecs
[ 0.467002] calling hpet_late_init+0x0/0x18f @ 1
[ 0.467173] initcall hpet_late_init+0x0/0x18f returned -19 after 0 usecs
[ 0.467352] calling init_amd_nbs+0x0/0x66 @ 1
[ 0.467617] initcall init_amd_nbs+0x0/0x66 returned 0 after 0 usecs
[ 0.467797] calling clocksource_done_booting+0x0/0x69 @ 1
[ 0.468105] Switched to clocksource refined-jiffies
[ 0.468330] initcall clocksource_done_booting+0x0/0x69 returned 0 after 0 usecs
[ 0.468619] calling init_pipe_fs+0x0/0x6c @ 1
[ 0.468958] initcall init_pipe_fs+0x0/0x6c returned 0 after 0 usecs
[ 0.469144] calling eventpoll_init+0x0/0xf3 @ 1
[ 0.469338] initcall eventpoll_init+0x0/0xf3 returned 0 after 0 usecs
[ 0.469525] calling anon_inode_init+0x0/0x7c @ 1
[ 0.469721] initcall anon_inode_init+0x0/0x7c returned 0 after 0 usecs
[ 0.469909] calling blk_scsi_ioctl_init+0x0/0x4cd @ 1
[ 0.470093] initcall blk_scsi_ioctl_init+0x0/0x4cd returned 0 after 0 usecs
[ 0.470281] calling acpi_event_init+0x0/0x7a @ 1
[ 0.470502] initcall acpi_event_init+0x0/0x7a returned 0 after 0 usecs
[ 0.470688] calling pnp_system_init+0x0/0x1d @ 1
[ 0.470925] initcall pnp_system_init+0x0/0x1d returned 0 after 0 usecs
[ 0.471111] calling pnpacpi_init+0x0/0xd2 @ 1
[ 0.471288] pnp: PnP ACPI init
[ 0.471497] ACPI: bus type PNP registered
[ 0.472224] system 00:00: [io 0x0230-0x0233] has been reserved
[ 0.472408] system 00:00: [io 0x0260-0x0267] has been reserved
[ 0.472592] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.472776] system 00:00: [io 0x0800-0x081f] has been reserved
[ 0.472960] system 00:00: [io 0x0900-0x0903] has been reserved
[ 0.473144] system 00:00: [io 0x0904-0x0907] has been reserved
[ 0.473329] system 00:00: [io 0x0908-0x090b] has been reserved
[ 0.473511] system 00:00: [io 0x090c-0x092e] has been reserved
[ 0.473695] system 00:00: [io 0x092f] has been reserved
[ 0.473876] system 00:00: [io 0x0930-0x09ff] has been reserved
[ 0.474060] system 00:00: [io 0x0c80-0x0c87] has been reserved
[ 0.474245] system 00:00: [io 0x0cf9] could not be reserved
[ 0.474426] system 00:00: [io 0x02f8-0x02ff] has been reserved
[ 0.474616] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.474822] pnp 00:01: [dma 7]
[ 0.475027] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.475247] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.475508] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.475739] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.476047] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.476513] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.476996] pnp 00:07: [dma 2]
[ 0.477216] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.477651] pnp: PnP ACPI: found 8 devices
[ 0.477826] ACPI: bus type PNP unregistered
[ 0.478003] initcall pnpacpi_init+0x0/0xd2 returned 0 after 7812 usecs
[ 0.478190] calling chr_dev_init+0x0/0x122 @ 1
[ 0.480080] initcall chr_dev_init+0x0/0x122 returned 0 after 3906 usecs
[ 0.480269] calling firmware_class_init+0x0/0x11f @ 1
[ 0.480462] initcall firmware_class_init+0x0/0x11f returned 0 after 0 usecs
[ 0.480650] calling thermal_init+0x0/0xf7 @ 1
[ 0.480853] initcall thermal_init+0x0/0xf7 returned 0 after 0 usecs
[ 0.484015] calling cpufreq_gov_performance_init+0x0/0x1d @ 1
[ 0.484200] initcall cpufreq_gov_performance_init+0x0/0x1d returned 0 after 0 usecs
[ 0.484487] calling cpufreq_gov_dbs_init+0x0/0x1d @ 1
[ 0.484667] initcall cpufreq_gov_dbs_init+0x0/0x1d returned 0 after 0 usecs
[ 0.486663] calling init_acpi_pm_clocksource+0x0/0x151 @ 1
[ 0.491459] Switched to clocksource acpi_pm
[ 0.491459] initcall init_acpi_pm_clocksource+0x0/0x151 returned 0 after 4155 usecs
[ 0.491459] calling pcibios_assign_resources+0x0/0xfe @ 1
[ 0.491459] pci 0000:00:03.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[ 0.491459] pci 0000:01:03.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.491459] pci 0000:01:02.2: BAR 6: assigned [mem 0xc0020000-0xc002ffff pref]
[ 0.491459] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.491459] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff]
[ 0.491459] pci 0000:00:03.0: bridge window [mem 0xf5f00000-0xf7efffff]
[ 0.491459] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xc00fffff pref]
[ 0.491459] pci 0000:02:04.0: BAR 6: assigned [mem 0xf5e00000-0xf5e03fff pref]
[ 0.491459] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.491459] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 0.491459] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.491459] pci 0000:00:07.0: bridge window [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.491660] pci 0000:00:08.0: PCI bridge to [bus 03]
[ 0.491846] pci_bus 0000:00: resource 4 [io 0x0000-0x5fff]
[ 0.492042] pci_bus 0000:00: resource 5 [mem 0xc0000000-0xf7ffffff]
[ 0.492224] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.492405] pci_bus 0000:00: resource 7 [mem 0xfe000000-0xffffffff]
[ 0.492589] pci_bus 0000:00: resource 8 [mem 0x400000000-0xfcffffffff]
[ 0.492772] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.492951] pci_bus 0000:01: resource 1 [mem 0xf5f00000-0xf7efffff]
[ 0.493133] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc00fffff pref]
[ 0.493317] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.493496] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.493677] pci_bus 0000:02: resource 2 [mem 0xf5e00000-0xf5efffff 64bit pref]
[ 0.493985] pci 0000:04:09.0: PCI bridge to [bus 05]
[ 0.494169] pci 0000:04:0a.0: PCI bridge to [bus 06]
[ 0.494351] pci 0000:04:0b.0: PCI bridge to [bus 07]
[ 0.494534] pci 0000:04:0c.0: PCI bridge to [bus 08]
[ 0.494716] pci_bus 0000:04: resource 4 [io 0x6000-0xffff]
[ 0.494895] pci_bus 0000:04: resource 5 [mem 0xf8000000-0xfdffffff]
[ 0.495080] initcall pcibios_assign_resources+0x0/0xfe returned 0 after 6140 usecs
[ 0.495364] calling sysctl_core_init+0x0/0x3e @ 1
[ 0.495571] initcall sysctl_core_init+0x0/0x3e returned 0 after 28 usecs
[ 0.495754] calling inet_init+0x0/0x4fb @ 1
[ 0.496038] NET: Registered protocol family 2
[ 0.496673] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.498004] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.499020] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.499340] TCP: reno registered
[ 0.499565] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.500092] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.500694] initcall inet_init+0x0/0x4fb returned 0 after 4642 usecs
[ 0.500879] calling ipv4_offload_init+0x0/0x9d @ 1
[ 0.501059] initcall ipv4_offload_init+0x0/0x9d returned 0 after 3 usecs
[ 0.501243] calling af_unix_init+0x0/0x75 @ 1
[ 0.501419] NET: Registered protocol family 1
[ 0.501602] initcall af_unix_init+0x0/0x75 returned 0 after 180 usecs
[ 0.501787] calling ipv6_offload_init+0x0/0xd0 @ 1
[ 0.501969] initcall ipv6_offload_init+0x0/0xd0 returned 0 after 3 usecs
[ 0.502154] calling pci_apply_final_quirks+0x0/0x184 @ 1
[ 0.502367] pci 0000:00:04.3: boot interrupts on device [1022:746b] already disabled
[ 0.502656] pci 0000:00:07.0: MSI quirk detected; subordinate MSI disabled
[ 0.502849] pci 0000:00:07.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.503041] pci 0000:00:08.0: MSI quirk detected; subordinate MSI disabled
[ 0.503232] pci 0000:00:08.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.644092] pci 0000:01:03.0: Boot video device
[ 0.644283] pci 0000:04:09.0: MSI quirk detected; subordinate MSI disabled
[ 0.644472] pci 0000:04:09.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.644665] pci 0000:04:0a.0: MSI quirk detected; subordinate MSI disabled
[ 0.644854] pci 0000:04:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.645047] pci 0000:04:0b.0: MSI quirk detected; subordinate MSI disabled
[ 0.645237] pci 0000:04:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.645431] pci 0000:04:0c.0: MSI quirk detected; subordinate MSI disabled
[ 0.645622] pci 0000:04:0c.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.645813] PCI: CLS 64 bytes, default 64
[ 0.645988] initcall pci_apply_final_quirks+0x0/0x184 returned 0 after 140285 usecs
[ 0.646273] calling default_rootfs+0x0/0x99 @ 1
[ 0.646517] initcall default_rootfs+0x0/0x99 returned 0 after 64 usecs
[ 0.646704] calling pci_iommu_init+0x0/0x68 @ 1
[ 0.649145] PCI-DMA: Disabling AGP.
[ 0.649606] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.649785] PCI-DMA: using GART IOMMU.
[ 0.649962] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.657992] initcall pci_iommu_init+0x0/0x68 returned 0 after 10825 usecs
[ 0.658198] calling ir_dev_scope_init+0x0/0x2a @ 1
[ 0.658376] initcall ir_dev_scope_init+0x0/0x2a returned 0 after 1 usecs
[ 0.658583] calling i8259A_init_ops+0x0/0x36 @ 1
[ 0.658763] initcall i8259A_init_ops+0x0/0x36 returned 0 after 3 usecs
[ 0.658946] calling vsyscall_init+0x0/0x39 @ 1
[ 0.659155] initcall vsyscall_init+0x0/0x39 returned 0 after 32 usecs
[ 0.659342] calling sbf_init+0x0/0x199 @ 1
[ 0.659519] initcall sbf_init+0x0/0x199 returned 0 after 1 usecs
[ 0.659701] calling init_tsc_clocksource+0x0/0x126 @ 1
[ 0.659909] initcall init_tsc_clocksource+0x0/0x126 returned 0 after 27 usecs
[ 0.660131] calling add_rtc_cmos+0x0/0x100 @ 1
[ 0.660437] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.660789] initcall add_rtc_cmos+0x0/0x100 returned 0 after 444 usecs
[ 0.661015] calling i8237A_init_ops+0x0/0x1f @ 1
[ 0.661225] initcall i8237A_init_ops+0x0/0x1f returned 0 after 1 usecs
[ 0.661432] calling cache_sysfs_init+0x0/0xa3 @ 1
[ 0.661831] initcall cache_sysfs_init+0x0/0xa3 returned 0 after 183 usecs
[ 0.662054] calling amd_uncore_init+0x0/0x1c1 @ 1
[ 0.662266] initcall amd_uncore_init+0x0/0x1c1 returned -19 after 1 usecs
[ 0.662491] calling amd_iommu_pc_init+0x0/0x203 @ 1
[ 0.662711] initcall amd_iommu_pc_init+0x0/0x203 returned -19 after 2 usecs
[ 0.662936] calling intel_uncore_init+0x0/0x50b @ 1
[ 0.663154] initcall intel_uncore_init+0x0/0x50b returned -19 after 1 usecs
[ 0.663374] calling amd_ibs_init+0x0/0x36a @ 1
[ 0.663592] initcall amd_ibs_init+0x0/0x36a returned -19 after 1 usecs
[ 0.663816] calling ioapic_init_ops+0x0/0x1f @ 1
[ 0.664063] initcall ioapic_init_ops+0x0/0x1f returned 0 after 1 usecs
[ 0.664292] calling add_pcspkr+0x0/0x71 @ 1
[ 0.664528] initcall add_pcspkr+0x0/0x71 returned 0 after 24 usecs
[ 0.664749] calling sysfb_init+0x0/0xe7 @ 1
[ 0.664979] initcall sysfb_init+0x0/0xe7 returned 0 after 16 usecs
[ 0.665202] calling ia32_binfmt_init+0x0/0x11 @ 1
[ 0.665424] initcall ia32_binfmt_init+0x0/0x11 returned 0 after 14 usecs
[ 0.665649] calling init_aout_binfmt+0x0/0x2f @ 1
[ 0.665865] initcall init_aout_binfmt+0x0/0x2f returned 0 after 2 usecs
[ 0.666089] calling proc_execdomains_init+0x0/0x3b @ 1
[ 0.666307] initcall proc_execdomains_init+0x0/0x3b returned 0 after 12 usecs
[ 0.666535] calling ioresources_init+0x0/0x6a @ 1
[ 0.666744] initcall ioresources_init+0x0/0x6a returned 0 after 4 usecs
[ 0.666967] calling uid_cache_init+0x0/0xd9 @ 1
[ 0.667186] initcall uid_cache_init+0x0/0xd9 returned 0 after 14 usecs
[ 0.667410] calling init_posix_timers+0x0/0x275 @ 1
[ 0.667664] initcall init_posix_timers+0x0/0x275 returned 0 after 45 usecs
[ 0.667881] calling init_posix_cpu_timers+0x0/0xa8 @ 1
[ 0.668124] initcall init_posix_cpu_timers+0x0/0xa8 returned 0 after 2 usecs
[ 0.668356] calling proc_schedstat_init+0x0/0x3b @ 1
[ 0.668570] initcall proc_schedstat_init+0x0/0x3b returned 0 after 3 usecs
[ 0.668794] calling init_sched_debug_procfs+0x0/0x51 @ 1
[ 0.669011] initcall init_sched_debug_procfs+0x0/0x51 returned 0 after 2 usecs
[ 0.669358] calling snapshot_device_init+0x0/0x1d @ 1
[ 0.669727] initcall snapshot_device_init+0x0/0x1d returned 0 after 147 usecs
[ 0.669958] calling irq_pm_init_ops+0x0/0x1f @ 1
[ 0.670171] initcall irq_pm_init_ops+0x0/0x1f returned 0 after 2 usecs
[ 0.670391] calling create_proc_profile+0x0/0x3b0 @ 1
[ 0.670611] initcall create_proc_profile+0x0/0x3b0 returned 0 after 1 usecs
[ 0.670837] calling timekeeping_init_ops+0x0/0x1f @ 1
[ 0.671059] initcall timekeeping_init_ops+0x0/0x1f returned 0 after 1 usecs
[ 0.671277] calling init_clocksource_sysfs+0x0/0xae @ 1
[ 0.671531] initcall init_clocksource_sysfs+0x0/0xae returned 0 after 48 usecs
[ 0.671865] calling init_timer_list_procfs+0x0/0x51 @ 1
[ 0.672120] initcall init_timer_list_procfs+0x0/0x51 returned 0 after 4 usecs
[ 0.672343] calling alarmtimer_init+0x0/0x1f6 @ 1
[ 0.672612] initcall alarmtimer_init+0x0/0x1f6 returned 0 after 52 usecs
[ 0.672836] calling clockevents_init_sysfs+0x0/0x161 @ 1
[ 0.673211] initcall clockevents_init_sysfs+0x0/0x161 returned 0 after 160 usecs
[ 0.673544] calling init_tstats_procfs+0x0/0x51 @ 1
[ 0.673765] initcall init_tstats_procfs+0x0/0x51 returned 0 after 4 usecs
[ 0.673983] calling futex_init+0x0/0x89 @ 1
[ 0.674210] initcall futex_init+0x0/0x89 returned 0 after 14 usecs
[ 0.674431] calling proc_dma_init+0x0/0x3b @ 1
[ 0.674652] initcall proc_dma_init+0x0/0x3b returned 0 after 2 usecs
[ 0.674877] calling proc_modules_init+0x0/0x3b @ 1
[ 0.675091] initcall proc_modules_init+0x0/0x3b returned 0 after 3 usecs
[ 0.675310] calling kallsyms_init+0x0/0x40 @ 1
[ 0.675524] initcall kallsyms_init+0x0/0x40 returned 0 after 3 usecs
[ 0.675749] calling user_namespaces_init+0x0/0x38 @ 1
[ 0.675979] initcall user_namespaces_init+0x0/0x38 returned 0 after 12 usecs
[ 0.676230] calling pid_namespaces_init+0x0/0x38 @ 1
[ 0.676442] initcall pid_namespaces_init+0x0/0x38 returned 0 after 11 usecs
[ 0.676656] calling gcov_init+0x0/0x1d @ 1
[ 0.676869] initcall gcov_init+0x0/0x1d returned 0 after 2 usecs
[ 0.677084] calling gcov_fs_init+0x0/0x13f @ 1
[ 0.693718] gcov: could not create file
[ 0.741798] initcall gcov_fs_init+0x0/0x13f returned 0 after 62987 usecs
[ 0.741995] calling init_kprobes+0x0/0x1f5 @ 1
[ 0.758444] initcall init_kprobes+0x0/0x1f5 returned 0 after 15889 usecs
[ 0.760801] calling hung_task_init+0x0/0x6f @ 1
[ 0.761149] initcall hung_task_init+0x0/0x6f returned 0 after 131 usecs
[ 0.761362] calling utsname_sysctl_init+0x0/0x1f @ 1
[ 0.761600] initcall utsname_sysctl_init+0x0/0x1f returned 0 after 21 usecs
[ 0.761824] calling irq_work_init_cpu_notifier+0x0/0x34 @ 1
[ 0.762049] initcall irq_work_init_cpu_notifier+0x0/0x34 returned 0 after 6 usecs
[ 0.762385] calling perf_event_sysfs_init+0x0/0xe0 @ 1
[ 0.762732] initcall perf_event_sysfs_init+0x0/0xe0 returned 0 after 129 usecs
[ 0.763073] calling init_per_zone_wmark_min+0x0/0x131 @ 1
[ 0.764762] initcall init_per_zone_wmark_min+0x0/0x131 returned 0 after 1433 usecs
[ 0.765115] calling kswapd_init+0x0/0xb8 @ 1
[ 0.765755] initcall kswapd_init+0x0/0xb8 returned 0 after 422 usecs
[ 0.765952] calling extfrag_debug_init+0x0/0xb1 @ 1
[ 0.766160] initcall extfrag_debug_init+0x0/0xb1 returned 0 after 27 usecs
[ 0.766373] calling setup_vmstat+0x0/0x12c @ 1
[ 0.766623] initcall setup_vmstat+0x0/0x12c returned 0 after 37 usecs
[ 0.766854] calling mm_sysfs_init+0x0/0x40 @ 1
[ 0.767064] initcall mm_sysfs_init+0x0/0x40 returned 0 after 5 usecs
[ 0.767287] calling mm_compute_batch_init+0x0/0xb5 @ 1
[ 0.767506] initcall mm_compute_batch_init+0x0/0xb5 returned 0 after 1 usecs
[ 0.767734] calling slab_proc_init+0x0/0x3e @ 1
[ 0.767951] initcall slab_proc_init+0x0/0x3e returned 0 after 3 usecs
[ 0.768192] calling init_reserve_notifier+0x0/0xa @ 1
[ 0.768400] initcall init_reserve_notifier+0x0/0xa returned 0 after 1 usecs
[ 0.768629] calling init_admin_reserve+0x0/0x50 @ 1
[ 0.768847] initcall init_admin_reserve+0x0/0x50 returned 0 after 1 usecs
[ 0.769071] calling init_user_reserve+0x0/0x50 @ 1
[ 0.769288] initcall init_user_reserve+0x0/0x50 returned 0 after 1 usecs
[ 0.769509] calling proc_vmalloc_init+0x0/0x3e @ 1
[ 0.769726] initcall proc_vmalloc_init+0x0/0x3e returned 0 after 3 usecs
[ 0.769949] calling procswaps_init+0x0/0x3b @ 1
[ 0.770164] initcall procswaps_init+0x0/0x3b returned 0 after 3 usecs
[ 0.770382] calling hugetlb_init+0x0/0x757 @ 1
[ 0.770602] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.770862] initcall hugetlb_init+0x0/0x757 returned 0 after 257 usecs
[ 0.771078] calling mmu_notifier_init+0x0/0x1d @ 1
[ 0.771300] initcall mmu_notifier_init+0x0/0x1d returned 0 after 5 usecs
[ 0.771523] calling ksm_init+0x0/0x20d @ 1
[ 0.771854] initcall ksm_init+0x0/0x20d returned 0 after 129 usecs
[ 0.772093] calling slab_sysfs_init+0x0/0x163 @ 1
[ 0.774042] initcall slab_sysfs_init+0x0/0x163 returned 0 after 1698 usecs
[ 0.774269] calling hugepage_init+0x0/0x1e5 @ 1
[ 0.775908] initcall hugepage_init+0x0/0x1e5 returned 0 after 1404 usecs
[ 0.776154] calling fcntl_init+0x0/0x35 @ 1
[ 0.776362] initcall fcntl_init+0x0/0x35 returned 0 after 5 usecs
[ 0.776584] calling proc_filesystems_init+0x0/0x3b @ 1
[ 0.776809] initcall proc_filesystems_init+0x0/0x3b returned 0 after 5 usecs
[ 0.777038] calling dio_init+0x0/0x38 @ 1
[ 0.777251] initcall dio_init+0x0/0x38 returned 0 after 3 usecs
[ 0.777468] calling fsnotify_mark_init+0x0/0x60 @ 1
[ 0.777784] initcall fsnotify_mark_init+0x0/0x60 returned 0 after 97 usecs
[ 0.778018] calling dnotify_init+0x0/0x9b @ 1
[ 0.778314] initcall dnotify_init+0x0/0x9b returned 0 after 79 usecs
[ 0.778540] calling inotify_user_setup+0x0/0x82 @ 1
[ 0.778763] initcall inotify_user_setup+0x0/0x82 returned 0 after 6 usecs
[ 0.778987] calling fanotify_user_setup+0x0/0x64 @ 1
[ 0.779209] initcall fanotify_user_setup+0x0/0x64 returned 0 after 5 usecs
[ 0.779435] calling aio_setup+0x0/0x9d @ 1
[ 0.779682] initcall aio_setup+0x0/0x9d returned 0 after 33 usecs
[ 0.779895] calling proc_locks_init+0x0/0x3d @ 1
[ 0.780137] initcall proc_locks_init+0x0/0x3d returned 0 after 8 usecs
[ 0.780358] calling init_sys32_ioctl+0x0/0x33 @ 1
[ 0.780668] initcall init_sys32_ioctl+0x0/0x33 returned 0 after 100 usecs
[ 0.780895] calling init_mbcache+0x0/0x1f @ 1
[ 0.781112] initcall init_mbcache+0x0/0x1f returned 0 after 1 usecs
[ 0.781333] calling proc_cmdline_init+0x0/0x3b @ 1
[ 0.781546] initcall proc_cmdline_init+0x0/0x3b returned 0 after 2 usecs
[ 0.781773] calling proc_consoles_init+0x0/0x3b @ 1
[ 0.781984] initcall proc_consoles_init+0x0/0x3b returned 0 after 2 usecs
[ 0.782205] calling proc_cpuinfo_init+0x0/0x3b @ 1
[ 0.782417] initcall proc_cpuinfo_init+0x0/0x3b returned 0 after 2 usecs
[ 0.782642] calling proc_devices_init+0x0/0x3b @ 1
[ 0.782863] initcall proc_devices_init+0x0/0x3b returned 0 after 2 usecs
[ 0.783081] calling proc_interrupts_init+0x0/0x3b @ 1
[ 0.783301] initcall proc_interrupts_init+0x0/0x3b returned 0 after 2 usecs
[ 0.783530] calling proc_loadavg_init+0x0/0x3c @ 1
[ 0.783751] initcall proc_loadavg_init+0x0/0x3c returned 0 after 2 usecs
[ 0.783977] calling proc_meminfo_init+0x0/0x3b @ 1
[ 0.784200] initcall proc_meminfo_init+0x0/0x3b returned 0 after 3 usecs
[ 0.784425] calling proc_stat_init+0x0/0x3b @ 1
[ 0.784639] initcall proc_stat_init+0x0/0x3b returned 0 after 3 usecs
[ 0.784854] calling proc_uptime_init+0x0/0x3b @ 1
[ 0.785070] initcall proc_uptime_init+0x0/0x3b returned 0 after 2 usecs
[ 0.785297] calling proc_version_init+0x0/0x3b @ 1
[ 0.785516] initcall proc_version_init+0x0/0x3b returned 0 after 2 usecs
[ 0.785739] calling proc_softirqs_init+0x0/0x3b @ 1
[ 0.785943] initcall proc_softirqs_init+0x0/0x3b returned 0 after 3 usecs
[ 0.786166] calling proc_kcore_init+0x0/0x10b @ 1
[ 0.786384] initcall proc_kcore_init+0x0/0x10b returned 0 after 13 usecs
[ 0.786607] calling proc_kmsg_init+0x0/0x3e @ 1
[ 0.786812] initcall proc_kmsg_init+0x0/0x3e returned 0 after 3 usecs
[ 0.787035] calling proc_page_init+0x0/0x70 @ 1
[ 0.787255] initcall proc_page_init+0x0/0x70 returned 0 after 4 usecs
[ 0.787466] calling init_devpts_fs+0x0/0x95 @ 1
[ 0.787723] initcall init_devpts_fs+0x0/0x95 returned 0 after 40 usecs
[ 0.787938] calling ext4_init_fs+0x0/0x3cf @ 1
[ 0.788439] initcall ext4_init_fs+0x0/0x3cf returned 0 after 269 usecs
[ 0.788665] calling journal_init+0x0/0x1e7 @ 1
[ 0.789097] initcall journal_init+0x0/0x1e7 returned 0 after 210 usecs
[ 0.789313] calling init_ramfs_fs+0x0/0x93 @ 1
[ 0.789528] initcall init_ramfs_fs+0x0/0x93 returned 0 after 1 usecs
[ 0.789755] calling init_hugetlbfs_fs+0x0/0x1ed @ 1
[ 0.790081] initcall init_hugetlbfs_fs+0x0/0x1ed returned 0 after 104 usecs
[ 0.790307] calling ipc_init+0x0/0x43 @ 1
[ 0.790517] msgmni has been set to 30074
[ 0.790731] initcall ipc_init+0x0/0x43 returned 0 after 213 usecs
[ 0.790952] calling ipc_sysctl_init+0x0/0x1f @ 1
[ 0.791181] initcall ipc_sysctl_init+0x0/0x1f returned 0 after 12 usecs
[ 0.791409] calling init_mqueue_fs+0x0/0xf3 @ 1
[ 0.791720] initcall init_mqueue_fs+0x0/0xf3 returned 0 after 90 usecs
[ 0.791948] calling key_proc_init+0x0/0x53 @ 1
[ 0.792180] initcall key_proc_init+0x0/0x53 returned 0 after 4 usecs
[ 0.792397] calling crypto_wq_init+0x0/0x4a @ 1
[ 0.792783] initcall crypto_wq_init+0x0/0x4a returned 0 after 162 usecs
[ 0.793015] calling crypto_algapi_init+0x0/0x18 @ 1
[ 0.793237] initcall crypto_algapi_init+0x0/0x18 returned 0 after 4 usecs
[ 0.793454] calling chainiv_module_init+0x0/0x1e @ 1
[ 0.793674] initcall chainiv_module_init+0x0/0x1e returned 0 after 3 usecs
[ 0.793901] calling eseqiv_module_init+0x0/0x1d @ 1
[ 0.794119] initcall eseqiv_module_init+0x0/0x1d returned 0 after 1 usecs
[ 0.794338] calling md5_mod_init+0x0/0x1d @ 1
[ 0.794700] cryptomgr_test (65) used greatest stack depth: 6840 bytes left
[ 0.794711] initcall md5_mod_init+0x0/0x1d returned 0 after 152 usecs
[ 0.794714] calling aes_init+0x0/0x1d @ 1
[ 0.795482] initcall aes_init+0x0/0x1d returned 0 after 745 usecs
[ 0.795713] calling crc32c_mod_init+0x0/0x1d @ 1
[ 0.796095] initcall crc32c_mod_init+0x0/0x1d returned 0 after 162 usecs
[ 0.796324] calling krng_mod_init+0x0/0x1d @ 1
[ 0.796693] initcall krng_mod_init+0x0/0x1d returned 0 after 148 usecs
[ 0.796921] calling proc_genhd_init+0x0/0x6c @ 1
[ 0.797153] initcall proc_genhd_init+0x0/0x6c returned 0 after 14 usecs
[ 0.797358] calling bsg_init+0x0/0x1ab @ 1
[ 0.797626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.797970] initcall bsg_init+0x0/0x1ab returned 0 after 391 usecs
[ 0.798194] calling noop_init+0x0/0x1d @ 1
[ 0.798393] io scheduler noop registered
[ 0.798602] initcall noop_init+0x0/0x1d returned 0 after 204 usecs
[ 0.798823] calling deadline_init+0x0/0x1d @ 1
[ 0.799038] io scheduler deadline registered
[ 0.799249] initcall deadline_init+0x0/0x1d returned 0 after 205 usecs
[ 0.799461] calling cfq_init+0x0/0x110 @ 1
[ 0.799739] io scheduler cfq registered (default)
[ 0.799942] initcall cfq_init+0x0/0x110 returned 0 after 260 usecs
[ 0.800202] calling percpu_counter_startup+0x0/0x2b @ 1
[ 0.800418] initcall percpu_counter_startup+0x0/0x2b returned 0 after 6 usecs
[ 0.800645] calling pci_proc_init+0x0/0x98 @ 1
[ 0.800969] initcall pci_proc_init+0x0/0x98 returned 0 after 110 usecs
[ 0.801190] calling pci_hotplug_init+0x0/0x68 @ 1
[ 0.801390] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.801575] initcall pci_hotplug_init+0x0/0x68 returned 0 after 179 usecs
[ 0.801760] calling acpi_reserve_resources+0x0/0x13f @ 1
[ 0.801949] initcall acpi_reserve_resources+0x0/0x13f returned 0 after 10 usecs
[ 0.802229] calling acpi_button_driver_init+0x0/0x1d @ 1
[ 0.802553] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.802844] ACPI: Power Button [PWRF]
[ 0.803055] initcall acpi_button_driver_init+0x0/0x1d returned 0 after 629 usecs
[ 0.803336] calling acpi_processor_driver_init+0x0/0x7f @ 1
[ 0.803545] ACPI: processor limited to max C-state 1
[ 0.803849] initcall acpi_processor_driver_init+0x0/0x7f returned 0 after 323 usecs
[ 0.804157] calling acpi_pad_init+0x0/0x167 @ 1
[ 0.804335] initcall acpi_pad_init+0x0/0x167 returned -22 after 1 usecs
[ 0.804519] calling pty_init+0x0/0x2a5 @ 1
[ 0.804786] initcall pty_init+0x0/0x2a5 returned 0 after 89 usecs
[ 0.804969] calling sysrq_init+0x0/0x14e @ 1
[ 0.805150] initcall sysrq_init+0x0/0x14e returned 0 after 6 usecs
[ 0.805331] calling serial8250_init+0x0/0x26b @ 1
[ 0.805509] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.826241] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.872640] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.873240] initcall serial8250_init+0x0/0x26b returned 0 after 66142 usecs
[ 0.875636] calling serial_pci_driver_init+0x0/0x26 @ 1
[ 0.875975] initcall serial_pci_driver_init+0x0/0x26 returned 0 after 114 usecs
[ 0.876356] calling hpet_init+0x0/0xa1 @ 1
[ 0.876663] initcall hpet_init+0x0/0xa1 returned 0 after 82 usecs
[ 0.876885] calling agp_init+0x0/0x3b @ 1
[ 0.877096] Linux agpgart interface v0.103
[ 0.877306] initcall agp_init+0x0/0x3b returned 0 after 204 usecs
[ 0.877528] calling agp_amd64_mod_init+0x0/0x40 @ 1
[ 0.877746] initcall agp_amd64_mod_init+0x0/0x40 returned -19 after 1 usecs
[ 0.877970] calling topology_sysfs_init+0x0/0xa0 @ 1
[ 0.878212] initcall topology_sysfs_init+0x0/0xa0 returned 0 after 25 usecs
[ 0.878442] calling cciss_init+0x0/0xf5 @ 1
[ 0.878653] HP CISS Driver (v 3.6.26)
[ 0.879250] cciss 0000:02:04.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date.
[ 0.999857] cciss 0000:02:04.0: cciss0: <0xb178> at PCI 0000:02:04.0 IRQ 18 using DAC
[ 1.002977] cciss/c0d0: p1 p2 < p5 >
[ 1.003728] scsi0 : cciss
[ 1.004097] initcall cciss_init+0x0/0xf5 returned 0 after 122500 usecs
[ 1.004137] calling 1_do_scan_async+0x0/0x260 @ 7
[ 1.004474] calling init_sd+0x0/0x220 @ 1
[ 1.004712] initcall 1_do_scan_async+0x0/0x260 returned 0 after 549 usecs
[ 1.004718] initcall init_sd+0x0/0x220 returned 0 after 57 usecs
[ 1.004722] calling net_olddevs_init+0x0/0x92 @ 1
[ 1.004736] initcall net_olddevs_init+0x0/0x92 returned 0 after 9 usecs
[ 1.004738] calling i8042_init+0x0/0x5b5 @ 1
[ 1.004786] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.006736] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.006915] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.007113] initcall i8042_init+0x0/0x5b5 returned 0 after 2312 usecs
[ 1.007293] calling mousedev_init+0x0/0xd9 @ 1
[ 1.007677] mousedev: PS/2 mouse device common for all mice
[ 1.007856] initcall mousedev_init+0x0/0xd9 returned 0 after 381 usecs
[ 1.008070] calling atkbd_init+0x0/0x39 @ 1
[ 1.008274] initcall atkbd_init+0x0/0x39 returned 0 after 24 usecs
[ 1.008453] calling cmos_init+0x0/0xaa @ 1
[ 1.008687] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.009071] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.009319] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram
[ 1.009511] initcall cmos_init+0x0/0xaa returned 0 after 867 usecs
[ 1.009690] calling sock_diag_init+0x0/0x1d @ 1
[ 1.009876] initcall sock_diag_init+0x0/0x1d returned 0 after 13 usecs
[ 1.010054] calling flow_cache_init_global+0x0/0x1ef @ 1
[ 1.010354] initcall flow_cache_init_global+0x0/0x1ef returned 0 after 120 usecs
[ 1.010629] calling blackhole_module_init+0x0/0x1d @ 1
[ 1.010807] initcall blackhole_module_init+0x0/0x1d returned 0 after 3 usecs
[ 1.010988] calling init_cgroup_cls+0x0/0x67 @ 1
[ 1.011163] initcall init_cgroup_cls+0x0/0x67 returned 0 after 2 usecs
[ 1.011355] calling sysctl_ipv4_init+0x0/0xc5 @ 1
[ 1.011582] initcall sysctl_ipv4_init+0x0/0xc5 returned 0 after 52 usecs
[ 1.011762] calling ipv4_netfilter_init+0x0/0x1d @ 1
[ 1.011937] initcall ipv4_netfilter_init+0x0/0x1d returned 0 after 1 usecs
[ 1.012153] calling cubictcp_register+0x0/0x7c @ 1
[ 1.012331] TCP: cubic registered
[ 1.012500] initcall cubictcp_register+0x0/0x7c returned 0 after 165 usecs
[ 1.012682] calling tcp_memcontrol_init+0x0/0x49 @ 1
[ 1.012859] initcall tcp_memcontrol_init+0x0/0x49 returned 0 after 3 usecs
[ 1.013039] calling inet6_init+0x0/0x659 @ 1
[ 1.013409] NET: Registered protocol family 10
[ 1.013893] initcall inet6_init+0x0/0x659 returned 0 after 666 usecs
[ 1.014073] calling packet_init+0x0/0x67 @ 1
[ 1.014243] NET: Registered protocol family 17
[ 1.014417] initcall packet_init+0x0/0x67 returned 0 after 169 usecs
[ 1.014595] calling init_dns_resolver+0x0/0x136 @ 1
[ 1.014778] Key type dns_resolver registered
[ 1.014949] initcall init_dns_resolver+0x0/0x136 returned 0 after 176 usecs
[ 1.015131] calling mcheck_init_device+0x0/0x1bf @ 1
[ 1.015526] initcall mcheck_init_device+0x0/0x1bf returned 0 after 215 usecs
[ 1.015729] calling mcheck_debugfs_init+0x0/0x5d @ 1
[ 1.015924] initcall mcheck_debugfs_init+0x0/0x5d returned 0 after 21 usecs
[ 1.016130] calling severities_debugfs_init+0x0/0x62 @ 1
[ 1.016320] initcall severities_debugfs_init+0x0/0x62 returned 0 after 14 usecs
[ 1.016595] calling threshold_init_device+0x0/0x78 @ 1
[ 1.016773] initcall threshold_init_device+0x0/0x78 returned 0 after 3 usecs
[ 1.016955] calling hpet_insert_resource+0x0/0x38 @ 1
[ 1.017132] initcall hpet_insert_resource+0x0/0x38 returned 1 after 1 usecs
[ 1.017313] calling update_mp_table+0x0/0x6a1 @ 1
[ 1.017488] initcall update_mp_table+0x0/0x6a1 returned 0 after 1 usecs
[ 1.017668] calling lapic_insert_resource+0x0/0x53 @ 1
[ 1.017847] initcall lapic_insert_resource+0x0/0x53 returned 0 after 4 usecs
[ 1.018029] calling io_apic_bug_finalize+0x0/0x24 @ 1
[ 1.018204] initcall io_apic_bug_finalize+0x0/0x24 returned 0 after 1 usecs
[ 1.018384] calling print_ICs+0x0/0x6d2 @ 1
[ 1.018556] initcall print_ICs+0x0/0x6d2 returned 0 after 1 usecs
[ 1.018733] calling check_early_ioremap_leak+0x0/0x8d @ 1
[ 1.018910] initcall check_early_ioremap_leak+0x0/0x8d returned 0 after 1 usecs
[ 1.019184] calling pat_memtype_list_init+0x0/0x47 @ 1
[ 1.019364] initcall pat_memtype_list_init+0x0/0x47 returned 0 after 4 usecs
[ 1.019546] calling init_oops_id+0x0/0x50 @ 1
[ 1.019721] initcall init_oops_id+0x0/0x50 returned 0 after 3 usecs
[ 1.019900] calling sched_init_debug+0x0/0x31 @ 1
[ 1.020100] initcall sched_init_debug+0x0/0x31 returned 0 after 4 usecs
[ 1.020279] calling pm_qos_power_init+0x0/0x8b @ 1
[ 1.020678] initcall pm_qos_power_init+0x0/0x8b returned 0 after 218 usecs
[ 1.020859] calling pm_debugfs_init+0x0/0x2f @ 1
[ 1.021038] initcall pm_debugfs_init+0x0/0x2f returned 0 after 6 usecs
[ 1.021218] calling printk_late_init+0x0/0x64 @ 1
[ 1.021403] initcall printk_late_init+0x0/0x64 returned 0 after 2 usecs
[ 1.021583] calling tk_debug_sleep_time_init+0x0/0x55 @ 1
[ 1.021763] initcall tk_debug_sleep_time_init+0x0/0x55 returned 0 after 4 usecs
[ 1.022039] calling debugfs_kprobe_init+0x0/0xe0 @ 1
[ 1.022222] initcall debugfs_kprobe_init+0x0/0xe0 returned 0 after 7 usecs
[ 1.022403] calling taskstats_init+0x0/0x85 @ 1
[ 1.022596] registered taskstats version 1
[ 1.022766] initcall taskstats_init+0x0/0x85 returned 0 after 186 usecs
[ 1.022946] calling max_swapfiles_check+0x0/0xa @ 1
[ 1.023122] initcall max_swapfiles_check+0x0/0xa returned 0 after 1 usecs
[ 1.023305] calling set_recommended_min_free_kbytes+0x0/0xe0 @ 1
[ 1.024931] initcall set_recommended_min_free_kbytes+0x0/0xe0 returned 0 after 1412 usecs
[ 1.025210] calling init_root_keyring+0x0/0x16 @ 1
[ 1.025409] initcall init_root_keyring+0x0/0x16 returned 0 after 24 usecs
[ 1.025593] calling prandom_reseed+0x0/0x75 @ 1
[ 1.025789] initcall prandom_reseed+0x0/0x75 returned 0 after 23 usecs
[ 1.025969] calling pci_resource_alignment_sysfs_init+0x0/0x2f @ 1
[ 1.026151] initcall pci_resource_alignment_sysfs_init+0x0/0x2f returned 0 after 3 usecs
[ 1.026428] calling pci_sysfs_init+0x0/0x78 @ 1
[ 1.026986] initcall pci_sysfs_init+0x0/0x78 returned 0 after 376 usecs
[ 1.027167] calling deferred_probe_initcall+0x0/0xa0 @ 1
[ 1.027536] initcall deferred_probe_initcall+0x0/0xa0 returned 0 after 187 usecs
[ 1.027811] calling rtc_hctosys+0x0/0x17d @ 1
[ 1.028087] rtc_cmos rtc_cmos: setting system clock to 2014-01-22 15:37:51 UTC (1390405071)
[ 1.028371] initcall rtc_hctosys+0x0/0x17d returned 0 after 378 usecs
[ 1.028550] calling firmware_memmap_init+0x0/0x43 @ 1
[ 1.028777] initcall firmware_memmap_init+0x0/0x43 returned 0 after 51 usecs
[ 1.028959] calling pci_mmcfg_late_insert_resources+0x0/0x69 @ 1
[ 1.029139] initcall pci_mmcfg_late_insert_resources+0x0/0x69 returned 0 after 1 usecs
[ 1.029414] calling tcp_congestion_default+0x0/0x1d @ 1
[ 1.029591] initcall tcp_congestion_default+0x0/0x1d returned 0 after 2 usecs
[ 1.029773] calling software_resume+0x0/0x400 @ 1
[ 1.029947] initcall software_resume+0x0/0x400 returned -2 after 1 usecs
[ 1.059989] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.067489] async_waiting @ 1
[ 1.067658] async_continuing @ 1 after 1 usec
[ 1.068402] EXT4-fs (cciss!c0d0p1): couldn't mount as ext3 due to feature incompatibilities
[ 1.069091] EXT4-fs (cciss!c0d0p1): couldn't mount as ext2 due to feature incompatibilities
[ 1.083041] EXT4-fs (cciss!c0d0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.083338] VFS: Mounted root (ext4 filesystem) readonly on device 104:1.
[ 1.099070] devtmpfs: mounted
[ 1.099245] async_waiting @ 1
[ 1.099411] async_continuing @ 1 after 1 usec
[ 1.101272] Freeing unused kernel memory: 872K (ffffffff81ce0000 - ffffffff81dba000)
[ 1.101551] Write protecting the kernel read-only data: 10240k
[ 1.109064] Freeing unused kernel memory: 1912K (ffff880001622000 - ffff880001800000)
[ 1.112288] Freeing unused kernel memory: 772K (ffff88000193f000 - ffff880001a00000)
[ 1.538484] modprobe (78) used greatest stack depth: 5264 bytes left
[ 1.629710] stty (82) used greatest stack depth: 4648 bytes left
[ 2.028489] mountpoint (131) used greatest stack depth: 4640 bytes left
[ 2.277946] udevd[196]: starting version 175
[ 2.494424] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 261
[ 2.494706] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -19 after 72 usecs
[ 2.513747] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 255
[ 2.514115] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -19 after 103 usecs
[ 2.547566] calling shpcd_init+0x0/0x1000 [shpchp] @ 273
[ 2.549728] shpchp 0000:00:07.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.550013] shpchp 0000:00:07.0: Cannot reserve MMIO region
[ 2.550204] shpchp 0000:00:08.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.550500] shpchp 0000:00:08.0: Cannot reserve MMIO region
[ 2.550844] shpchp 0000:04:09.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.551195] shpchp 0000:04:09.0: Cannot reserve MMIO region
[ 2.554702] shpchp 0000:04:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.555005] shpchp 0000:04:0a.0: Cannot reserve MMIO region
[ 2.555202] shpchp 0000:04:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.555492] shpchp 0000:04:0b.0: Cannot reserve MMIO region
[ 2.555697] shpchp 0000:04:0c.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 2.555987] shpchp 0000:04:0c.0: Cannot reserve MMIO region
[ 2.556393] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.556602] initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 6775 usecs
[ 2.558520] calling evdev_init+0x0/0x1000 [evdev] @ 270
[ 2.561274] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 2453 usecs
[ 2.581726] calling ata_init+0x0/0x4dc [libata] @ 275
[ 2.587599] calling mod_init+0x0/0x1000 [amd_rng] @ 277
[ 2.587843] AMD768 RNG detected
[ 2.588288] initcall mod_init+0x0/0x1000 [amd_rng] returned 0 after 463 usecs
[ 2.593908] libata version 3.00 loaded.
[ 2.594160] initcall ata_init+0x0/0x4dc [libata] returned 0 after 11893 usecs
[ 2.600377] calling i2c_init+0x0/0x1000 [i2c_core] @ 277
[ 2.600726] initcall i2c_init+0x0/0x1000 [i2c_core] returned 0 after 76 usecs
[ 2.602350] calling hpwdt_driver_init+0x0/0x1000 [hpwdt] @ 309
[ 2.602711] hpwdt 0000:01:02.0: This server does not have an iLO2+ ASIC.
[ 2.603646] initcall hpwdt_driver_init+0x0/0x1000 [hpwdt] returned 0 after 1040 usecs
[ 2.616355] calling ilo_init+0x0/0x1000 [hpilo] @ 311
[ 2.618458] initcall ilo_init+0x0/0x1000 [hpilo] returned 0 after 1812 usecs
[ 2.623247] calling amd756_driver_init+0x0/0x1000 [i2c_amd756] @ 277
[ 2.624300] calling amd_pci_driver_init+0x0/0x1000 [pata_amd] @ 275
[ 2.624883] pata_amd 0000:00:04.1: version 0.4.1
[ 2.624916] initcall amd756_driver_init+0x0/0x1000 [i2c_amd756] returned 0 after 1375 usecs
[ 2.632660] scsi1 : pata_amd
[ 2.640282] scsi2 : pata_amd
[ 2.640696] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[ 2.640945] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[ 2.641292] initcall amd_pci_driver_init+0x0/0x1000 [pata_amd] returned 0 after 16348 usecs
[ 2.646837] calling usb_init+0x0/0x266 [usbcore] @ 308
[ 2.647100] ACPI: bus type USB registered
[ 2.647391] usbcore: registered new interface driver usbfs
[ 2.647663] usbcore: registered new interface driver hub
[ 2.654477] usbcore: registered new device driver usb
[ 2.654742] initcall usb_init+0x0/0x266 [usbcore] returned 0 after 7425 usecs
[ 2.680624] calling phy_init+0x0/0x59 [libphy] @ 359
[ 2.680926] initcall phy_init+0x0/0x59 [libphy] returned 0 after 82 usecs
[ 2.690525] calling pps_init+0x0/0x1000 [pps_core] @ 351
[ 2.690755] pps_core: LinuxPPS API ver. 1 registered
[ 2.690929] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.691215] initcall pps_init+0x0/0x1000 [pps_core] returned 0 after 481 usecs
[ 2.701327] calling ptp_init+0x0/0x1000 [ptp] @ 351
[ 2.701547] PTP clock support registered
[ 2.701723] initcall ptp_init+0x0/0x1000 [ptp] returned 0 after 193 usecs
[ 2.703333] calling ioapic_driver_init+0x0/0x1000 [ioapic] @ 356
[ 2.705061] calling ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 308
[ 2.705276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.705468] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 184 usecs
[ 2.724097] ioapic: probe of 0000:00:07.1 failed with error -22
[ 2.729857] ioapic: probe of 0000:00:08.1 failed with error -22
[ 2.730851] ioapic: probe of 0000:04:09.1 failed with error -22
[ 2.731127] ioapic: probe of 0000:04:0a.1 failed with error -22
[ 2.731360] ioapic: probe of 0000:04:0b.1 failed with error -22
[ 2.731597] ioapic: probe of 0000:04:0c.1 failed with error -22
[ 2.731926] initcall ioapic_driver_init+0x0/0x1000 [ioapic] returned 0 after 27701 usecs
[ 2.758948] calling psmouse_init+0x0/0xc7 [psmouse] @ 383
[ 2.759571] initcall psmouse_init+0x0/0xc7 [psmouse] returned 0 after 374 usecs
[ 2.767517] BUG: unable to handle kernel paging request at 00000000b4343e88
[ 2.767842] IP: [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.768109] PGD 0
[ 2.768290] calling pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] @ 385
[ 2.768440] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.768673] initcall pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] returned 0 after 365 usecs
[ 2.768252] Oops: 0000 [#1] SMP
[ 2.768252] Modules linked in: pcspkr k8temp(+) psmouse ehci_hcd ioapic ptp pps_core libphy usbcore pata_amd i2c_amd756 hpilo usb_common hpwdt i2c_core amd_rng libata evdev shpchp
[ 2.770697] CPU: 1 PID: 369 Comm: modprobe Not tainted 3.13.0 #45
[ 2.770697] Hardware name: HP ProLiant DL585 G1, BIOS A01 02/14/2007
[ 2.770697] task: ffff8800b30f3300 ti: ffff8800b321a000 task.ti: ffff8800b321a000
[ 2.770697] RIP: 0010:[<ffffffff8109e31b>] [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.770697] RSP: 0018:ffff8800b321bd78 EFLAGS: 00010202
[ 2.770697] RAX: ffffffff81ba70c0 RBX: 00000000b4343e88 RCX: 0000000000003334
[ 2.770697] RDX: ffffffff81ac40a8 RSI: 00000000000149a0 RDI: 00000000b4343e88
[ 2.770697] RBP: ffffffffa00af6b8 R08: 00000000000149a0 R09: ffff8801fbc149a0
[ 2.770697] R10: ffffea000be73140 R11: ffff8800b8803b00 R12: ffffffffa00af6a0
[ 2.770697] R13: ffff8800b321be78 R14: 0000000000000000 R15: 0000000000000000
[ 2.770697] FS: 00007fd0f5614700(0000) GS:ffff8801fbc00000(0000) knlGS:0000000000000000
[ 2.770697] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.770697] CR2: 00000000b4343e88 CR3: 00000001f9f37000 CR4: 00000000000007e0
[ 2.770697] Stack:
[ 2.770697] ffffffff81ac40a0 ffffffff81607663 ffffffffa00af220 ffffffff8160772b
[ 2.770697] 0000000000000000 ffffffff81110ac5 0000000000000000 ffffffff810f7b2b
[ 2.770697] ffffffff810f4000 0000000000000000 0000000000000000 ffffffff00000003
[ 2.770697] Call Trace:
[ 2.770697] [<ffffffff81607663>] ? __mutex_unlock_slowpath+0x53/0x80
[ 2.770697] [<ffffffff8160772b>] ? mutex_unlock+0x2b/0x40
[ 2.770697] [<ffffffff81110ac5>] ? __gcov_init+0x65/0xb0
[ 2.770697] [<ffffffff810f7b2b>] ? load_module+0x223b/0x2710
[ 2.770697] [<ffffffff810f4000>] ? get_modinfo.isra.35+0x110/0x110
[ 2.770697] [<ffffffff8160a0f2>] ? page_fault+0x22/0x30
[ 2.770697] [<ffffffff810f80ee>] ? SyS_init_module+0xee/0x140
[ 2.770697] [<ffffffff816131a1>] ? tracesys+0xd4/0xd9
[ 2.770697] Code: 48 83 ec 08 31 d2 48 ff 05 13 58 da 00 e8 ae fb ff ff 48 ff 05 0f 58 da 00 48 83 c4 08 c3 66 90 48 ff 05 a9 54 da 00 53 48 89 fb <48> 8b 07 a8 0c 75 18 48 89 df 31 d2 be 03 00 00 00 e8 7f fb ff
[ 2.770697] RIP [<ffffffff8109e31b>] wake_up_process+0xb/0x50
[ 2.770697] RSP <ffff8800b321bd78>
[ 2.770697] CR2: 00000000b4343e88
[ 2.783281] ---[ end trace 38add4c3f78d74c5 ]---
[ 2.786341] calling ohci_hcd_mod_init+0x0/0x1000 [ohci_hcd] @ 310
[ 2.786569] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.786768] initcall ohci_hcd_mod_init+0x0/0x1000 [ohci_hcd] returned 0 after 191 usecs
[ 2.798568] calling edac_init+0x0/0xe9b [edac_core] @ 374
[ 2.798766] EDAC MC: Ver: 3.0.0
[ 2.799490] initcall edac_init+0x0/0xe9b [edac_core] returned 0 after 698 usecs
[ 2.801651] calling floppy_module_init+0x0/0xbea [floppy] @ 350
[ 2.802239] Floppy drive(s): fd0 is 1.44M
[ 2.818740] FDC 0 is a National Semiconductor PC87306
[ 2.820578] calling tg3_driver_init+0x0/0x1000 [tg3] @ 359
[ 2.820908] tg3.c:v3.134 (Sep 16, 2013)
[ 2.822985] initcall floppy_module_init+0x0/0xbea [floppy] returned 0 after 20583 usecs
[ 2.847117] calling ohci_pci_init+0x0/0x1000 [ohci_pci] @ 308
[ 2.847357] ohci-pci: OHCI PCI platform driver
[ 2.847899] ohci-pci 0000:01:00.0: OHCI PCI host controller
[ 2.848195] ohci-pci 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 2.848618] ohci-pci 0000:01:00.0: irq 19, io mem 0xf7ef0000
[ 2.862807] calling mce_amd_init+0x0/0x1000 [edac_mce_amd] @ 360
[ 2.863044] MCE: In-kernel MCE decoding enabled.
[ 2.863266] initcall mce_amd_init+0x0/0x1000 [edac_mce_amd] returned 0 after 215 usecs
[ 2.876804] tg3 0000:02:06.0 eth0: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e3
[ 2.877178] tg3 0000:02:06.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.877539] tg3 0000:02:06.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
[ 2.877863] tg3 0000:02:06.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 2.890170] calling amd64_edac_init+0x0/0x1000 [amd64_edac_mod] @ 374
[ 2.890412] AMD64 EDAC driver v3.4.0
[ 2.890777] EDAC amd64: DRAM ECC enabled.
[ 2.890986] EDAC amd64: K8 revE or earlier detected (node 0).
[ 2.891244] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 2.891459] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 2.891861] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 2.892632] EDAC amd64: DRAM ECC enabled.
[ 2.892855] EDAC amd64: K8 revE or earlier detected (node 1).
[ 2.893167] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 2.893392] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 2.895958] EDAC MC1: Giving out device to module amd64_edac controller K8: DEV 0000:00:19.2 (INTERRUPT)
[ 2.896517] EDAC amd64: DRAM ECC enabled.
[ 2.896771] EDAC amd64: K8 revE or earlier detected (node 2).
[ 2.897065] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 2.897284] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 2.897708] EDAC MC2: Giving out device to module amd64_edac controller K8: DEV 0000:00:1a.2 (INTERRUPT)
[ 2.898167] EDAC amd64: DRAM ECC enabled.
[ 2.898425] EDAC amd64: K8 revE or earlier detected (node 3).
[ 2.898732] EDAC amd64: CS6: Registered Double data rate SDRAM
[ 2.898921] EDAC amd64: CS7: Registered Double data rate SDRAM
[ 2.899423] EDAC MC3: Giving out device to module amd64_edac controller K8: DEV 0000:00:1b.2 (INTERRUPT)
[ 2.901186] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 2.901523] initcall amd64_edac_init+0x0/0x1000 [amd64_edac_mod] returned 0 after 10840 usecs
[ 2.916393] ata1.00: ATAPI: COMPAQ CD-ROM SN-124, N104, max PIO4
[ 2.925664] tg3 0000:02:06.1 eth1: Tigon3 [partno(349321-001) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:13:21:07:9c:e2
[ 2.925970] tg3 0000:02:06.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.926256] tg3 0000:02:06.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.926532] tg3 0000:02:06.1 eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 2.928980] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.929021] initcall tg3_driver_init+0x0/0x1000 [tg3] returned 0 after 105679 usecs
[ 2.929455] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.929738] usb usb1: Product: OHCI PCI host controller
[ 2.929921] usb usb1: Manufacturer: Linux 3.13.0 ohci_hcd
[ 2.930096] usb usb1: SerialNumber: 0000:01:00.0
[ 2.930581] hub 1-0:1.0: USB hub found
[ 2.930786] hub 1-0:1.0: 3 ports detected
[ 2.931633] ohci-pci 0000:01:00.1: OHCI PCI host controller
[ 2.931823] ohci-pci 0000:01:00.1: new USB bus registered, assigned bus number 2
[ 2.932184] ohci-pci 0000:01:00.1: irq 19, io mem 0xf7ee0000
[ 2.933338] ata1.00: configured for PIO4
[ 2.934299] scsi 1:0:0:0: CD-ROM COMPAQ CD-ROM SN-124 N104 PQ: 0 ANSI: 5
[ 2.934945] ata2: port disabled--ignoring
[ 2.954973] calling cdrom_init+0x0/0x1000 [cdrom] @ 405
[ 2.955190] initcall cdrom_init+0x0/0x1000 [cdrom] returned 0 after 16 usecs
[ 2.959414] calling init_sr+0x0/0x1000 [sr_mod] @ 405
[ 2.963608] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 2.963800] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.964366] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.964641] initcall init_sr+0x0/0x1000 [sr_mod] returned 0 after 4904 usecs
[ 2.990169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.990395] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.990738] usb usb2: Product: OHCI PCI host controller
[ 2.990951] usb usb2: Manufacturer: Linux 3.13.0 ohci_hcd
[ 2.991164] usb usb2: SerialNumber: 0000:01:00.1
[ 2.991600] hub 2-0:1.0: USB hub found
[ 2.991830] hub 2-0:1.0: 3 ports detected
[ 2.992466] initcall ohci_pci_init+0x0/0x1000 [ohci_pci] returned 0 after 141686 usecs
[ 3.011707] calling init_sg+0x0/0x1000 [sg] @ 406
[ 3.012222] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 3.012449] initcall init_sg+0x0/0x1000 [sg] returned 0 after 491 usecs
[ 3.251943] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 3.407998] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3
[ 63.903788] random: nonblocking pool is initialized
[ 64.426955] Adding 2927612k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2927612k
[ 64.453187] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: (null)
[ 64.589877] EXT4-fs (cciss!c0d0p1): re-mounted. Opts: errors=remount-ro
[ 64.792149] calling loop_init+0x0/0x1000 [loop] @ 1062
[ 64.797878] loop: module loaded
[ 64.798086] initcall loop_init+0x0/0x1000 [loop] returned 0 after 5588 usecs
[ 66.268625] ip (1882) used greatest stack depth: 4264 bytes left
[ 66.766098] calling init_sunrpc+0x0/0xd0 [sunrpc] @ 1982
[ 66.766808] RPC: Registered named UNIX socket transport module.
[ 66.766995] RPC: Registered udp transport module.
[ 66.767232] RPC: Registered tcp transport module.
[ 66.767406] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 66.767615] initcall init_sunrpc+0x0/0xd0 [sunrpc] returned 0 after 1171 usecs
[ 66.787687] calling fscache_init+0x0/0x2c6 [fscache] @ 1984
[ 66.788262] FS-Cache: Loaded
[ 66.788476] initcall fscache_init+0x0/0x2c6 [fscache] returned 0 after 539 usecs
[ 66.802289] calling init_nlm+0x0/0x1000 [lockd] @ 1984
[ 66.802518] initcall init_nlm+0x0/0x1000 [lockd] returned 0 after 24 usecs
[ 66.826604] calling init_nfs_fs+0x0/0x255 [nfs] @ 1984
[ 66.826815] FS-Cache: Netfs 'nfs' registered for caching
[ 66.827571] initcall init_nfs_fs+0x0/0x255 [nfs] returned 0 after 733 usecs
[ 66.867947] calling init_rpcsec_gss+0x0/0x1000 [auth_rpcgss] @ 1986
[ 66.868266] initcall init_rpcsec_gss+0x0/0x1000 [auth_rpcgss] returned 0 after 39 usecs
[ 66.893334] calling init_nfsd+0x0/0x1000 [nfsd] @ 1986
[ 66.893571] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 66.894240] initcall init_nfsd+0x0/0x1000 [nfsd] returned 0 after 630 usecs
[ 67.182938] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 68.277569] calling cpufreq_stats_init+0x0/0x1000 [cpufreq_stats] @ 2368
[ 68.277783] initcall cpufreq_stats_init+0x0/0x1000 [cpufreq_stats] returned 0 after 7 usecs
[ 68.320894] calling cpufreq_gov_powersave_init+0x0/0x1000 [cpufreq_powersave] @ 2437
[ 68.321220] initcall cpufreq_gov_powersave_init+0x0/0x1000 [cpufreq_powersave] returned 0 after 5 usecs
[ 68.345768] calling cpufreq_gov_userspace_init+0x0/0x1000 [cpufreq_userspace] @ 2470
[ 68.346089] initcall cpufreq_gov_userspace_init+0x0/0x1000 [cpufreq_userspace] returned 0 after 4 usecs
[ 68.489130] calling cpufreq_gov_dbs_init+0x0/0x1000 [cpufreq_conservative] @ 2492
[ 68.489427] initcall cpufreq_gov_dbs_init+0x0/0x1000 [cpufreq_conservative] returned 0 after 3 usecs
[ 68.560281] calling powernowk8_init+0x0/0x2fb [powernow_k8] @ 2553
[ 68.560510] powernow-k8: Power state transitions not supported
[ 68.560714] powernow-k8: Power state transitions not supported
[ 68.560925] powernow-k8: Power state transitions not supported
[ 68.561168] powernow-k8: Power state transitions not supported
[ 68.561389] initcall powernowk8_init+0x0/0x2fb [powernow_k8] returned -19 after 869 usecs
[ 68.587095] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 2590
[ 68.587392] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -19 after 77 usecs
[ 68.878402] tg3 0000:02:06.0 eth0: Link is up at 100 Mbps, full duplex
[ 68.878750] tg3 0000:02:06.0 eth0: Flow control is on for TX and on for RX
[ 68.878997] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-01-22 15:33 ` Meelis Roos
@ 2014-01-24 13:47 ` Peter Oberparleiter
2014-01-24 20:54 ` Meelis Roos
0 siblings, 1 reply; 14+ messages in thread
From: Peter Oberparleiter @ 2014-01-24 13:47 UTC (permalink / raw)
To: Meelis Roos; +Cc: Andrew Morton, Linux Kernel list
On 22.01.2014 16:33, Meelis Roos wrote:
>> It looks like gcov exploded when running a module's constructors or
>> init function, but I'm unable to work out which module it was :(
> [...]
>
>> Maybe it's tg3.
>>
>> Could you add `ignore_loglevel' to the kernel boot parameters? That
>> should make all pr_debug()s come out and they include the module's
>> name.
I'm not sure if this related, but all 3 kernel logs consistently contain
this error message:
> [ 0.617401] gcov: could not create file
which should only be shown in case of severe out-of-memory situations or
duplicate object file names.
Could you retry with the following patch applied (2 times if possible)
and send dmesg output?
-----
diff -Naurp a/kernel/gcov/base.c b/kernel/gcov/base.c
--- a/kernel/gcov/base.c
+++ b/kernel/gcov/base.c
@@ -31,6 +31,7 @@ void __gcov_init(struct gcov_info *info)
{
static unsigned int gcov_version;
+ pr_warn("__gcov_init(%s): enter\n", gcov_info_filename(info));
mutex_lock(&gcov_lock);
if (gcov_version == 0) {
gcov_version = gcov_info_version(info);
@@ -48,6 +49,7 @@ void __gcov_init(struct gcov_info *info)
if (gcov_events_enabled)
gcov_event(GCOV_ADD, info);
mutex_unlock(&gcov_lock);
+ pr_warn("__gcov_init(%s): exit\n", gcov_info_filename(info));
}
EXPORT_SYMBOL(__gcov_init);
diff -Naurp a/kernel/gcov/fs.c b/kernel/gcov/fs.c
--- a/kernel/gcov/fs.c
+++ b/kernel/gcov/fs.c
@@ -450,7 +450,7 @@ static struct gcov_node *new_node(struct
} else
node->dentry = debugfs_create_dir(node->name, parent->dentry);
if (!node->dentry) {
- pr_warn("could not create file\n");
+ pr_warn("could not create file (%s)\n", node->name);
kfree(node);
return NULL;
}
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-01-24 13:47 ` Peter Oberparleiter
@ 2014-01-24 20:54 ` Meelis Roos
2014-01-27 15:53 ` Peter Oberparleiter
0 siblings, 1 reply; 14+ messages in thread
From: Meelis Roos @ 2014-01-24 20:54 UTC (permalink / raw)
To: Peter Oberparleiter; +Cc: Andrew Morton, Linux Kernel list
[-- Attachment #1: Type: TEXT/PLAIN, Size: 902 bytes --]
> >> It looks like gcov exploded when running a module's constructors or
> >> init function, but I'm unable to work out which module it was :(
> > [...]
> >
> >> Maybe it's tg3.
> >>
> >> Could you add `ignore_loglevel' to the kernel boot parameters? That
> >> should make all pr_debug()s come out and they include the module's
> >> name.
>
> I'm not sure if this related, but all 3 kernel logs consistently contain
> this error message:
>
> > [ 0.617401] gcov: could not create file
>
> which should only be shown in case of severe out-of-memory situations or
> duplicate object file names.
>
> Could you retry with the following patch applied (2 times if possible)
> and send dmesg output?
This seems to be relevant - now there is a reproducible crash during the
printk. Captured end of the backtrace from HP ILO as image, attached.
This is reproducible.
--
Meelis Roos (mroos@linux.ee)
[-- Attachment #2: Type: IMAGE/png, Size: 11663 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-01-24 20:54 ` Meelis Roos
@ 2014-01-27 15:53 ` Peter Oberparleiter
2014-01-28 6:33 ` Meelis Roos
0 siblings, 1 reply; 14+ messages in thread
From: Peter Oberparleiter @ 2014-01-27 15:53 UTC (permalink / raw)
To: Meelis Roos; +Cc: Andrew Morton, Linux Kernel list
On 24.01.2014 21:54, Meelis Roos wrote:
>>>> It looks like gcov exploded when running a module's constructors or
>>>> init function, but I'm unable to work out which module it was :(
>>> [...]
>>>
>>>> Maybe it's tg3.
>>>>
>>>> Could you add `ignore_loglevel' to the kernel boot parameters? That
>>>> should make all pr_debug()s come out and they include the module's
>>>> name.
>>
>> I'm not sure if this related, but all 3 kernel logs consistently contain
>> this error message:
>>
>>> [ 0.617401] gcov: could not create file
>>
>> which should only be shown in case of severe out-of-memory situations or
>> duplicate object file names.
>>
>> Could you retry with the following patch applied (2 times if possible)
>> and send dmesg output?
>
> This seems to be relevant - now there is a reproducible crash during the
> printk. Captured end of the backtrace from HP ILO as image, attached.
> This is reproducible.
Ok, that's a lead. It appears that gcov-kernel receives gcov_info
structures in an unexpected format. Based on your previous dmesg output,
your kernel was compiled using gcc 4.7.2 which gcov-kernel should be able
to handle just fine. Could you please try out this debugging patch
(replacing the previous one)? Output will likely be quite verbose, so you
might consider using log_buf_len=1M or similar as kernel parameter.
-----
diff -Naurp a/kernel/gcov/base.c b/kernel/gcov/base.c
--- a/kernel/gcov/base.c
+++ b/kernel/gcov/base.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/printk.h>
#include "gcov.h"
static int gcov_events_enabled;
@@ -31,6 +32,9 @@ void __gcov_init(struct gcov_info *info)
{
static unsigned int gcov_version;
+ pr_warn("__gcov_init(%p): enter\n", info);
+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_ADDRESS, 16, 4, info,
+ 64, true);
mutex_lock(&gcov_lock);
if (gcov_version == 0) {
gcov_version = gcov_info_version(info);
@@ -48,6 +52,7 @@ void __gcov_init(struct gcov_info *info)
if (gcov_events_enabled)
gcov_event(GCOV_ADD, info);
mutex_unlock(&gcov_lock);
+ pr_warn("__gcov_init(%p): exit\n", info);
}
EXPORT_SYMBOL(__gcov_init);
diff -Naurp a/kernel/module.c b/kernel/module.c
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3003,8 +3003,11 @@ static void do_mod_ctors(struct module *
#ifdef CONFIG_CONSTRUCTORS
unsigned long i;
- for (i = 0; i < mod->num_ctors; i++)
+ for (i = 0; i < mod->num_ctors; i++) {
+ pr_warn("Calling mod(%s)->ctors[%d]=%p\n", mod->name, i,
+ mod->ctors[i]);
mod->ctors[i]();
+ }
#endif
}
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-01-27 15:53 ` Peter Oberparleiter
@ 2014-01-28 6:33 ` Meelis Roos
2014-01-29 15:05 ` Peter Oberparleiter
0 siblings, 1 reply; 14+ messages in thread
From: Meelis Roos @ 2014-01-28 6:33 UTC (permalink / raw)
To: Peter Oberparleiter; +Cc: Andrew Morton, Linux Kernel list
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1468 bytes --]
> >>>> It looks like gcov exploded when running a module's constructors or
> >>>> init function, but I'm unable to work out which module it was :(
> >>> [...]
> >>>
> >>>> Maybe it's tg3.
> >>>>
> >>>> Could you add `ignore_loglevel' to the kernel boot parameters? That
> >>>> should make all pr_debug()s come out and they include the module's
> >>>> name.
> >>
> >> I'm not sure if this related, but all 3 kernel logs consistently contain
> >> this error message:
> >>
> >>> [ 0.617401] gcov: could not create file
> >>
> >> which should only be shown in case of severe out-of-memory situations or
> >> duplicate object file names.
> >>
> >> Could you retry with the following patch applied (2 times if possible)
> >> and send dmesg output?
> >
> > This seems to be relevant - now there is a reproducible crash during the
> > printk. Captured end of the backtrace from HP ILO as image, attached.
> > This is reproducible.
>
> Ok, that's a lead. It appears that gcov-kernel receives gcov_info
> structures in an unexpected format. Based on your previous dmesg output,
> your kernel was compiled using gcc 4.7.2 which gcov-kernel should be able
> to handle just fine. Could you please try out this debugging patch
> (replacing the previous one)? Output will likely be quite verbose, so you
> might consider using log_buf_len=1M or similar as kernel parameter.
I do not get very far - it still crashes on startuo. PNG attached.
--
Meelis Roos (mroos@linux.ee)
[-- Attachment #2: Type: IMAGE/png, Size: 11829 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-01-28 6:33 ` Meelis Roos
@ 2014-01-29 15:05 ` Peter Oberparleiter
[not found] ` <alpine.SOC.1.00.1401292242390.12718@math.ut.ee>
0 siblings, 1 reply; 14+ messages in thread
From: Peter Oberparleiter @ 2014-01-29 15:05 UTC (permalink / raw)
To: Meelis Roos; +Cc: Andrew Morton, Linux Kernel list
On 28.01.2014 07:33, Meelis Roos wrote:
>>>>>> It looks like gcov exploded when running a module's constructors or
>>>>>> init function, but I'm unable to work out which module it was :(
>>>>> [...]
>>>>>
>>>>>> Maybe it's tg3.
>>>>>>
>>>>>> Could you add `ignore_loglevel' to the kernel boot parameters? That
>>>>>> should make all pr_debug()s come out and they include the module's
>>>>>> name.
>>>>
>>>> I'm not sure if this related, but all 3 kernel logs consistently contain
>>>> this error message:
>>>>
>>>>> [ 0.617401] gcov: could not create file
>>>>
>>>> which should only be shown in case of severe out-of-memory situations or
>>>> duplicate object file names.
>>>>
>>>> Could you retry with the following patch applied (2 times if possible)
>>>> and send dmesg output?
>>>
>>> This seems to be relevant - now there is a reproducible crash during the
>>> printk. Captured end of the backtrace from HP ILO as image, attached.
>>> This is reproducible.
>>
>> Ok, that's a lead. It appears that gcov-kernel receives gcov_info
>> structures in an unexpected format. Based on your previous dmesg output,
>> your kernel was compiled using gcc 4.7.2 which gcov-kernel should be able
>> to handle just fine. Could you please try out this debugging patch
>> (replacing the previous one)? Output will likely be quite verbose, so you
>> might consider using log_buf_len=1M or similar as kernel parameter.
>
> I do not get very far - it still crashes on startuo. PNG attached.
I tried to reproduce this behavior a couple of times with no success.
Could you post your kernel configuration? I've also modified the
debugging patch to ensure that the gcov_info structure passed to
gcov_init() is no longer accessed beyond displaying the first 64
bytes. If you could apply this and send dmesg output, this might
hopefully provide a clue as to why the kernel cannot handle these
data structures correctly.
diff -Naurp a/kernel/gcov/base.c b/kernel/gcov/base.c
--- a/kernel/gcov/base.c
+++ b/kernel/gcov/base.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/printk.h>
#include "gcov.h"
static int gcov_events_enabled;
@@ -31,6 +32,10 @@ void __gcov_init(struct gcov_info *info)
{
static unsigned int gcov_version;
+ pr_warn("__gcov_init(%p): enter\n", info);
+ print_hex_dump(KERN_WARNING, "", DUMP_PREFIX_ADDRESS, 16, 4, info,
+ 64, true);
+ return;
mutex_lock(&gcov_lock);
if (gcov_version == 0) {
gcov_version = gcov_info_version(info);
diff -Naurp a/kernel/module.c b/kernel/module.c
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3003,8 +3003,11 @@ static void do_mod_ctors(struct module *
#ifdef CONFIG_CONSTRUCTORS
unsigned long i;
- for (i = 0; i < mod->num_ctors; i++)
+ for (i = 0; i < mod->num_ctors; i++) {
+ pr_warn("Calling mod(%s)->ctors[%ld]=%p\n", mod->name, i,
+ mod->ctors[i]);
mod->ctors[i]();
+ }
#endif
}
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
[not found] ` <alpine.SOC.1.00.1401292242390.12718@math.ut.ee>
@ 2014-01-31 15:50 ` Peter Oberparleiter
2014-02-05 17:00 ` Peter Oberparleiter
0 siblings, 1 reply; 14+ messages in thread
From: Peter Oberparleiter @ 2014-01-31 15:50 UTC (permalink / raw)
To: Meelis Roos
Cc: Andrew Morton, Linux Kernel list, Borislav Petkov, H. Peter Anvin
On 29.01.2014 21:44, Meelis Roos wrote:
>>> I do not get very far - it still crashes on startuo. PNG attached.
>>
>> I tried to reproduce this behavior a couple of times with no success.
>> Could you post your kernel configuration? I've also modified the
>> debugging patch to ensure that the gcov_info structure passed to
>> gcov_init() is no longer accessed beyond displaying the first 64
>> bytes. If you could apply this and send dmesg output, this might
>> hopefully provide a clue as to why the kernel cannot handle these
>> data structures correctly.
>
> This patch makes it boot. dmesg and config are below.
Using your config I was able to reproduce the crash and locate the
cause. Commit d61931d89b, "x86: Add optimized popcnt variants" adds
option -fcall-saved-rdi to the compile flags of lib/hweight.c when
compiling for x86_64. Together with options --coverage and -O2, this
results in a broken constructor being generated by GCC for this object
file which in turn causes __gcov_init() to overwrite random memory
locations (a mutex in your case).
I tried to report this as a bug against GCC [1] but the report was
closed as invalid citing the following section from GCC documentation
for -fcall-saved-*:
It is an error to use this flag with the frame pointer or stack
pointer. Use of this flag for other registers that have fixed
pervasive roles in the machine's execution model produces disastrous
results.
Apparently %rdi is the first parameter register on x86_64 and therefore
qualifies as having a fixed pervasive role.
Digging deeper into the history of commit d61931d89b I found a
discussion [2] indicating that the use of -fcall-saved-rdi is not
strictly necessary with a dummy inline asm constraint being a potential
alternative. I've added Borislav Petkov and H. Peter Anvin who have been
involved in the discussion of this commit to CC:, hoping that they might
be able to provide a solution to this problem.
[1] http://gcc.gnu.org/bugzilla/show_bug.cgi?id=60008
[2] http://lkml.org/lkml/2010/2/23/24
--
Peter Oberparleiter
Linux on System z Development - IBM Germany
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-01-31 15:50 ` Peter Oberparleiter
@ 2014-02-05 17:00 ` Peter Oberparleiter
2014-02-05 17:36 ` H. Peter Anvin
2014-02-06 6:19 ` 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88 Meelis Roos
0 siblings, 2 replies; 14+ messages in thread
From: Peter Oberparleiter @ 2014-02-05 17:00 UTC (permalink / raw)
To: Meelis Roos; +Cc: Andrew Morton, Linux Kernel list, H. Peter Anvin
On 31.01.2014 16:50, Peter Oberparleiter wrote:
> On 29.01.2014 21:44, Meelis Roos wrote:
>>>> I do not get very far - it still crashes on startuo. PNG attached.
>>>
>>> I tried to reproduce this behavior a couple of times with no success.
>>> Could you post your kernel configuration? I've also modified the
>>> debugging patch to ensure that the gcov_info structure passed to
>>> gcov_init() is no longer accessed beyond displaying the first 64
>>> bytes. If you could apply this and send dmesg output, this might
>>> hopefully provide a clue as to why the kernel cannot handle these
>>> data structures correctly.
>>
>> This patch makes it boot. dmesg and config are below.
>
> Using your config I was able to reproduce the crash and locate the
> cause. Commit d61931d89b, "x86: Add optimized popcnt variants" adds
> option -fcall-saved-rdi to the compile flags of lib/hweight.c when
> compiling for x86_64. Together with options --coverage and -O2, this
> results in a broken constructor being generated by GCC for this object
> file which in turn causes __gcov_init() to overwrite random memory
> locations (a mutex in your case).
Could you give this patch a try? It is a variation of the approach
proposed in the discussion mentioned earlier and fixes the problem
on my system.
--
diff -Naurp a/arch/x86/include/asm/arch_hweight.h b/arch/x86/include/asm/arch_hweight.h
--- a/arch/x86/include/asm/arch_hweight.h
+++ b/arch/x86/include/asm/arch_hweight.h
@@ -25,9 +25,18 @@ static inline unsigned int __arch_hweigh
{
unsigned int res = 0;
+#ifdef CONFIG_X86_32
asm (ALTERNATIVE("call __sw_hweight32", POPCNT32, X86_FEATURE_POPCNT)
: "="REG_OUT (res)
: REG_IN (w));
+#else
+ /* Tell gcc that %rdi is clobbered as an input operand */
+ unsigned long dummy;
+
+ asm (ALTERNATIVE("call __sw_hweight32", POPCNT32, X86_FEATURE_POPCNT)
+ : "="REG_OUT (res), "=D" (dummy)
+ : REG_IN (w));
+#endif /* CONFIG_X86_32 */
return res;
}
@@ -50,8 +59,11 @@ static inline unsigned long __arch_hweig
return __arch_hweight32((u32)w) +
__arch_hweight32((u32)(w >> 32));
#else
+ /* Tell gcc that %rdi is clobbered as an input operand */
+ unsigned long dummy;
+
asm (ALTERNATIVE("call __sw_hweight64", POPCNT64, X86_FEATURE_POPCNT)
- : "="REG_OUT (res)
+ : "="REG_OUT (res), "=D" (dummy)
: REG_IN (w));
#endif /* CONFIG_X86_32 */
diff -Naurp a/arch/x86/Kconfig b/arch/x86/Kconfig
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -254,7 +254,7 @@ config X86_32_LAZY_GS
config ARCH_HWEIGHT_CFLAGS
string
default "-fcall-saved-ecx -fcall-saved-edx" if X86_32
- default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64
+ default "-fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64
config ARCH_SUPPORTS_UPROBES
def_bool y
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-02-05 17:00 ` Peter Oberparleiter
@ 2014-02-05 17:36 ` H. Peter Anvin
2014-02-06 14:58 ` Peter Oberparleiter
2014-02-06 6:19 ` 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88 Meelis Roos
1 sibling, 1 reply; 14+ messages in thread
From: H. Peter Anvin @ 2014-02-05 17:36 UTC (permalink / raw)
To: Peter Oberparleiter, Meelis Roos; +Cc: Andrew Morton, Linux Kernel list
On 02/05/2014 09:00 AM, Peter Oberparleiter wrote:
>
> Could you give this patch a try? It is a variation of the approach
> proposed in the discussion mentioned earlier and fixes the problem
> on my system.
>
I would rather suggest that we explicitly disable gcov etc. from these
kinds of small, magic primitives. Honestly, you're just trying to put a
bandaid on a gaping wound.
The real thing here is that hweight.c is not a normal C file, and we
shouldn't treat is as such. It is a constrained environment, and trying
to tack crap like gcov to it is bound to lose, simply because gcov
doesn't know the rules it has to play by.
Even with the below change, if gcov clobbers, say, %rdx we're still screwed.
-hpa
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-02-05 17:00 ` Peter Oberparleiter
2014-02-05 17:36 ` H. Peter Anvin
@ 2014-02-06 6:19 ` Meelis Roos
1 sibling, 0 replies; 14+ messages in thread
From: Meelis Roos @ 2014-02-06 6:19 UTC (permalink / raw)
To: Peter Oberparleiter; +Cc: Andrew Morton, Linux Kernel list, H. Peter Anvin
> > Using your config I was able to reproduce the crash and locate the
> > cause. Commit d61931d89b, "x86: Add optimized popcnt variants" adds
> > option -fcall-saved-rdi to the compile flags of lib/hweight.c when
> > compiling for x86_64. Together with options --coverage and -O2, this
> > results in a broken constructor being generated by GCC for this object
> > file which in turn causes __gcov_init() to overwrite random memory
> > locations (a mutex in your case).
>
> Could you give this patch a try? It is a variation of the approach
> proposed in the discussion mentioned earlier and fixes the problem
> on my system.
It works for me too - the machine booted up with no problem.
--
Meelis Roos (mroos@linux.ee)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88
2014-02-05 17:36 ` H. Peter Anvin
@ 2014-02-06 14:58 ` Peter Oberparleiter
2014-02-06 15:18 ` [tip:x86/urgent] x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y tip-bot for Peter Oberparleiter
0 siblings, 1 reply; 14+ messages in thread
From: Peter Oberparleiter @ 2014-02-06 14:58 UTC (permalink / raw)
To: H. Peter Anvin, Meelis Roos; +Cc: Andrew Morton, Linux Kernel list
On 05.02.2014 18:36, H. Peter Anvin wrote:
> On 02/05/2014 09:00 AM, Peter Oberparleiter wrote:
>>
>> Could you give this patch a try? It is a variation of the approach
>> proposed in the discussion mentioned earlier and fixes the problem
>> on my system.
>>
>
> I would rather suggest that we explicitly disable gcov etc. from these
> kinds of small, magic primitives. Honestly, you're just trying to put a
> bandaid on a gaping wound.
>
> The real thing here is that hweight.c is not a normal C file, and we
> shouldn't treat is as such. It is a constrained environment, and trying
> to tack crap like gcov to it is bound to lose, simply because gcov
> doesn't know the rules it has to play by.
>
> Even with the below change, if gcov clobbers, say, %rdx we're still screwed.
I'm fine with the proposed alternative of disabling gcov profiling for
lib/hweight.c. The patch below fixes the problem on my test system.
---
x86/hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y
Commit d61931d89b, "x86: Add optimized popcnt variants" introduced
compile flag -fcall-saved-rdi for lib/hweight.c. When combined with
options -fprofile-arcs and -O2, this flag causes gcc to generate broken
constructor code. As a result, a 64 bit x86 kernel compiled with
CONFIG_GCOV_PROFILE_ALL=y prints message "gcov: could not create file"
and runs into sproadic BUGs during boot.
This patch avoids the bug by excluding lib/hweight.o from coverage
profiling.
Reported-by: Meelis Roos <mroos@linux.ee>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
---
lib/Makefile | 1 +
1 file changed, 1 insertion(+)
diff -Naurp a/lib/Makefile b/lib/Makefile
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o
obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
+GCOV_PROFILE_hweight.o := n
CFLAGS_hweight.o = $(subst $(quote),,$(CONFIG_ARCH_HWEIGHT_CFLAGS))
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
^ permalink raw reply [flat|nested] 14+ messages in thread
* [tip:x86/urgent] x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y
2014-02-06 14:58 ` Peter Oberparleiter
@ 2014-02-06 15:18 ` tip-bot for Peter Oberparleiter
0 siblings, 0 replies; 14+ messages in thread
From: tip-bot for Peter Oberparleiter @ 2014-02-06 15:18 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, oberpar, hpa, mingo, stable, akpm, mroos, tglx
Commit-ID: 6583327c4dd55acbbf2a6f25e775b28b3abf9a42
Gitweb: http://git.kernel.org/tip/6583327c4dd55acbbf2a6f25e775b28b3abf9a42
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
AuthorDate: Thu, 6 Feb 2014 15:58:20 +0100
Committer: H. Peter Anvin <hpa@zytor.com>
CommitDate: Thu, 6 Feb 2014 07:15:20 -0800
x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y
Commit d61931d89b, "x86: Add optimized popcnt variants" introduced
compile flag -fcall-saved-rdi for lib/hweight.c. When combined with
options -fprofile-arcs and -O2, this flag causes gcc to generate
broken constructor code. As a result, a 64 bit x86 kernel compiled
with CONFIG_GCOV_PROFILE_ALL=y prints message "gcov: could not create
file" and runs into sproadic BUGs during boot.
The gcc people indicate that these kinds of problems are endemic when
using ad hoc calling conventions. It is therefore best to treat any
file compiled with ad hoc calling conventions as an isolated
environment and avoid things like profiling or coverage analysis,
since those subsystems assume a "normal" calling conventions.
This patch avoids the bug by excluding lib/hweight.o from coverage
profiling.
Reported-by: Meelis Roos <mroos@linux.ee>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/52F3A30C.7050205@linux.vnet.ibm.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
---
lib/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/lib/Makefile b/lib/Makefile
index a459c31..04944e9 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
+GCOV_PROFILE_hweight.o := n
CFLAGS_hweight.o = $(subst $(quote),,$(CONFIG_ARCH_HWEIGHT_CFLAGS))
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
^ permalink raw reply related [flat|nested] 14+ messages in thread
end of thread, other threads:[~2014-02-06 15:18 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-21 10:34 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88 Meelis Roos
2014-01-21 22:10 ` Andrew Morton
2014-01-22 15:33 ` Meelis Roos
2014-01-24 13:47 ` Peter Oberparleiter
2014-01-24 20:54 ` Meelis Roos
2014-01-27 15:53 ` Peter Oberparleiter
2014-01-28 6:33 ` Meelis Roos
2014-01-29 15:05 ` Peter Oberparleiter
[not found] ` <alpine.SOC.1.00.1401292242390.12718@math.ut.ee>
2014-01-31 15:50 ` Peter Oberparleiter
2014-02-05 17:00 ` Peter Oberparleiter
2014-02-05 17:36 ` H. Peter Anvin
2014-02-06 14:58 ` Peter Oberparleiter
2014-02-06 15:18 ` [tip:x86/urgent] x86, hweight: Fix BUG when booting with CONFIG_GCOV_PROFILE_ALL=y tip-bot for Peter Oberparleiter
2014-02-06 6:19 ` 3.13: BUG: unable to handle kernel paging request at 00000000b4343e88 Meelis Roos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).