[PATCH 0/5] x86,vdso: Restore a bunch of section headers

[PATCH 0/5] x86,vdso: Restore a bunch of section headers

[Andy Lutomirski]

This series makes me sad.  It brings the 64-bit vdso back above 4kB,
like it was in 3.15.  It's also just silly, but it seems to be
needed to keep binutils happy when debugging the vdso.

Patch 5 isn't really necessary, and is likely not 3.16 material.
It's useful for testing the rest of this series, though.

Andy Lutomirski (5):
  x86,vdso: Discard the __bug_table section
  x86,vdso2c: Use better macros for ELF bitness
  x86,vdso: Improve the fake section headers
  x86,vdso: Remove some redundant in-memory section headers
  x86,vdso: Create .build-id links for unstripped vdso files

 arch/x86/vdso/Makefile                   |  13 +-
 arch/x86/vdso/vdso-fakesections.c        |  41 +++----
 arch/x86/vdso/vdso-layout.lds.S          |  64 +++++++---
 arch/x86/vdso/vdso.lds.S                 |   2 +
 arch/x86/vdso/vdso2c.c                   |  73 ++++++------
 arch/x86/vdso/vdso2c.h                   | 197 ++++++++++++++++++++++++++-----
 arch/x86/vdso/vdso32/vdso-fakesections.c |   1 +
 arch/x86/vdso/vdsox32.lds.S              |   2 +
 8 files changed, 279 insertions(+), 114 deletions(-)
 create mode 100644 arch/x86/vdso/vdso32/vdso-fakesections.c

-- 
1.9.3

[PATCH 1/5] x86,vdso: Discard the __bug_table section

[Andy Lutomirski]

It serves no purpose in user code.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/vdso-layout.lds.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/vdso/vdso-layout.lds.S
index 2ec72f6..c84166c 100644
--- a/arch/x86/vdso/vdso-layout.lds.S
+++ b/arch/x86/vdso/vdso-layout.lds.S
@@ -75,6 +75,7 @@ SECTIONS
 	/DISCARD/ : {
 		*(.discard)
 		*(.discard.*)
+		*(__bug_table)
 	}
 }
 
-- 
1.9.3

[PATCH 2/5] x86,vdso2c: Use better macros for ELF bitness

[Andy Lutomirski]

Rather than using a separate macro for each replacement, use generic
macros.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/vdso2c.c | 42 +++++++++++++-----------------------------
 arch/x86/vdso/vdso2c.h | 23 ++++++++++++-----------
 2 files changed, 25 insertions(+), 40 deletions(-)

diff --git a/arch/x86/vdso/vdso2c.c b/arch/x86/vdso/vdso2c.c
index 7a6bf50..7343899 100644
--- a/arch/x86/vdso/vdso2c.c
+++ b/arch/x86/vdso/vdso2c.c
@@ -83,37 +83,21 @@ extern void bad_put_le(void);
 
 #define NSYMS (sizeof(required_syms) / sizeof(required_syms[0]))
 
-#define BITS 64
-#define GOFUNC go64
-#define Elf_Ehdr Elf64_Ehdr
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Phdr Elf64_Phdr
-#define Elf_Sym Elf64_Sym
-#define Elf_Dyn Elf64_Dyn
+#define BITSFUNC3(name, bits) name##bits
+#define BITSFUNC2(name, bits) BITSFUNC3(name, bits)
+#define BITSFUNC(name) BITSFUNC2(name, ELF_BITS)
+
+#define ELF_BITS_XFORM2(bits, x) Elf##bits##_##x
+#define ELF_BITS_XFORM(bits, x) ELF_BITS_XFORM2(bits, x)
+#define ELF(x) ELF_BITS_XFORM(ELF_BITS, x)
+
+#define ELF_BITS 64
 #include "vdso2c.h"
-#undef BITS
-#undef GOFUNC
-#undef Elf_Ehdr
-#undef Elf_Shdr
-#undef Elf_Phdr
-#undef Elf_Sym
-#undef Elf_Dyn
-
-#define BITS 32
-#define GOFUNC go32
-#define Elf_Ehdr Elf32_Ehdr
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Phdr Elf32_Phdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Dyn Elf32_Dyn
+#undef ELF_BITS
+
+#define ELF_BITS 32
 #include "vdso2c.h"
-#undef BITS
-#undef GOFUNC
-#undef Elf_Ehdr
-#undef Elf_Shdr
-#undef Elf_Phdr
-#undef Elf_Sym
-#undef Elf_Dyn
+#undef ELF_BITS
 
 static void go(void *addr, size_t len, FILE *outfile, const char *name)
 {
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index c6eefaf..8e185ce 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -4,23 +4,24 @@
  * are built for 32-bit userspace.
  */
 
-static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name)
+static void BITSFUNC(go)(void *addr, size_t len,
+			 FILE *outfile, const char *name)
 {
 	int found_load = 0;
 	unsigned long load_size = -1;  /* Work around bogus warning */
 	unsigned long data_size;
-	Elf_Ehdr *hdr = (Elf_Ehdr *)addr;
+	ELF(Ehdr) *hdr = (ELF(Ehdr) *)addr;
 	int i;
 	unsigned long j;
-	Elf_Shdr *symtab_hdr = NULL, *strtab_hdr, *secstrings_hdr,
+	ELF(Shdr) *symtab_hdr = NULL, *strtab_hdr, *secstrings_hdr,
 		*alt_sec = NULL;
-	Elf_Dyn *dyn = 0, *dyn_end = 0;
+	ELF(Dyn) *dyn = 0, *dyn_end = 0;
 	const char *secstrings;
 	uint64_t syms[NSYMS] = {};
 
 	uint64_t fake_sections_value = 0, fake_sections_size = 0;
 
-	Elf_Phdr *pt = (Elf_Phdr *)(addr + GET_LE(&hdr->e_phoff));
+	ELF(Phdr) *pt = (ELF(Phdr) *)(addr + GET_LE(&hdr->e_phoff));
 
 	/* Walk the segment table. */
 	for (i = 0; i < GET_LE(&hdr->e_phnum); i++) {
@@ -61,7 +62,7 @@ static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name)
 		GET_LE(&hdr->e_shentsize)*GET_LE(&hdr->e_shstrndx);
 	secstrings = addr + GET_LE(&secstrings_hdr->sh_offset);
 	for (i = 0; i < GET_LE(&hdr->e_shnum); i++) {
-		Elf_Shdr *sh = addr + GET_LE(&hdr->e_shoff) +
+		ELF(Shdr) *sh = addr + GET_LE(&hdr->e_shoff) +
 			GET_LE(&hdr->e_shentsize) * i;
 		if (GET_LE(&sh->sh_type) == SHT_SYMTAB)
 			symtab_hdr = sh;
@@ -82,7 +83,7 @@ static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name)
 	     i < GET_LE(&symtab_hdr->sh_size) / GET_LE(&symtab_hdr->sh_entsize);
 	     i++) {
 		int k;
-		Elf_Sym *sym = addr + GET_LE(&symtab_hdr->sh_offset) +
+		ELF(Sym) *sym = addr + GET_LE(&symtab_hdr->sh_offset) +
 			GET_LE(&symtab_hdr->sh_entsize) * i;
 		const char *name = addr + GET_LE(&strtab_hdr->sh_offset) +
 			GET_LE(&sym->st_name);
@@ -123,12 +124,12 @@ static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name)
 		fail("end_mapping must be a multiple of 4096\n");
 
 	/* Remove sections or use fakes */
-	if (fake_sections_size % sizeof(Elf_Shdr))
+	if (fake_sections_size % sizeof(ELF(Shdr)))
 		fail("vdso_fake_sections size is not a multiple of %ld\n",
-		     (long)sizeof(Elf_Shdr));
+		     (long)sizeof(ELF(Shdr)));
 	PUT_LE(&hdr->e_shoff, fake_sections_value);
-	PUT_LE(&hdr->e_shentsize, fake_sections_value ? sizeof(Elf_Shdr) : 0);
-	PUT_LE(&hdr->e_shnum, fake_sections_size / sizeof(Elf_Shdr));
+	PUT_LE(&hdr->e_shentsize, fake_sections_value ? sizeof(ELF(Shdr)) : 0);
+	PUT_LE(&hdr->e_shnum, fake_sections_size / sizeof(ELF(Shdr)));
 	PUT_LE(&hdr->e_shstrndx, SHN_UNDEF);
 
 	if (!name) {
-- 
1.9.3

[PATCH 3/5] x86,vdso: Improve the fake section headers

[Andy Lutomirski]

Fully stripping the vDSO has other unfortunate side effects:

 - binutils is unable to find ELF notes without a SHT_NOTE section.

 - Even elfutils has trouble: it can find ELF notes without a section
   table at all, but if a section table is present, it won't look for
   PT_NOTE.

 - gdb wants section names to match between stripped DSOs and their
   symbols; otherwise it will corrupt symbol addresses.

We're also breaking the rules: section 0 is supposed to be SHT_NULL.

Fix these problems by building a better fake section table.  While
we're at it, we might as well let buggy Go versions keep working well
by giving the SHT_DYNSYM entry the correct size.

This is a bit unfortunate: it adds quite a bit of size to the vdso
image.

If/when binutils improves and the improved versions become widespread,
it would be worth considering dropping most of this.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/Makefile                   |   4 +-
 arch/x86/vdso/vdso-fakesections.c        |  44 ++++----
 arch/x86/vdso/vdso-layout.lds.S          |  40 +++++--
 arch/x86/vdso/vdso.lds.S                 |   2 +
 arch/x86/vdso/vdso2c.c                   |  31 ++++--
 arch/x86/vdso/vdso2c.h                   | 180 +++++++++++++++++++++++++++----
 arch/x86/vdso/vdso32/vdso-fakesections.c |   1 +
 arch/x86/vdso/vdsox32.lds.S              |   2 +
 8 files changed, 237 insertions(+), 67 deletions(-)
 create mode 100644 arch/x86/vdso/vdso32/vdso-fakesections.c

diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 3c0809a..2c1ca98 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -11,7 +11,6 @@ VDSO32-$(CONFIG_COMPAT)		:= y
 
 # files to link into the vdso
 vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o vdso-fakesections.o
-vobjs-nox32 := vdso-fakesections.o
 
 # files to link into kernel
 obj-y				+= vma.o
@@ -134,7 +133,7 @@ override obj-dirs = $(dir $(obj)) $(obj)/vdso32/
 
 targets += vdso32/vdso32.lds
 targets += vdso32/note.o vdso32/vclock_gettime.o $(vdso32.so-y:%=vdso32/%.o)
-targets += vdso32/vclock_gettime.o
+targets += vdso32/vclock_gettime.o vdso32/vdso-fakesections.o
 
 $(obj)/vdso32.o: $(vdso32-images:%=$(obj)/%)
 
@@ -155,6 +154,7 @@ $(vdso32-images:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
 $(vdso32-images:%=$(obj)/%.dbg): $(obj)/vdso32-%.so.dbg: FORCE \
 				 $(obj)/vdso32/vdso32.lds \
 				 $(obj)/vdso32/vclock_gettime.o \
+				 $(obj)/vdso32/vdso-fakesections.o \
 				 $(obj)/vdso32/note.o \
 				 $(obj)/vdso32/%.o
 	$(call if_changed,vdso)
diff --git a/arch/x86/vdso/vdso-fakesections.c b/arch/x86/vdso/vdso-fakesections.c
index cb8a8d7..56927a7 100644
--- a/arch/x86/vdso/vdso-fakesections.c
+++ b/arch/x86/vdso/vdso-fakesections.c
@@ -2,31 +2,23 @@
  * Copyright 2014 Andy Lutomirski
  * Subject to the GNU Public License, v.2
  *
- * Hack to keep broken Go programs working.
- *
- * The Go runtime had a couple of bugs: it would read the section table to try
- * to figure out how many dynamic symbols there were (it shouldn't have looked
- * at the section table at all) and, if there were no SHT_SYNDYM section table
- * entry, it would use an uninitialized value for the number of symbols.  As a
- * workaround, we supply a minimal section table.  vdso2c will adjust the
- * in-memory image so that "vdso_fake_sections" becomes the section table.
- *
- * The bug was introduced by:
- * https://code.google.com/p/go/source/detail?r=56ea40aac72b (2012-08-31)
- * and is being addressed in the Go runtime in this issue:
- * https://code.google.com/p/go/issues/detail?id=8197
+ * String table for loadable section headers.  See vdso2c.h for why
+ * this exists.
  */
 
-#ifndef __x86_64__
-#error This hack is specific to the 64-bit vDSO
-#endif
-
-#include <linux/elf.h>
-
-extern const __visible struct elf64_shdr vdso_fake_sections[];
-const __visible struct elf64_shdr vdso_fake_sections[] = {
-	{
-		.sh_type = SHT_DYNSYM,
-		.sh_entsize = sizeof(Elf64_Sym),
-	}
-};
+const char fake_shstrtab[] __attribute__((section(".fake_shstrtab"))) =
+	".hash\0"
+	".dynsym\0"
+	".dynstr\0"
+	".gnu.version\0"
+	".gnu.version_d\0"
+	".dynamic\0"
+	".rodata\0"
+	".fake_shstrtab\0"  /* Yay, self-referential code. */
+	".note\0"
+	".data\0"
+	".altinstructions\0"
+	".altinstr_replacement\0"
+	".eh_frame_hdr\0"
+	".eh_frame\0"
+	".text";
diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/vdso/vdso-layout.lds.S
index c84166c..e4cbc21 100644
--- a/arch/x86/vdso/vdso-layout.lds.S
+++ b/arch/x86/vdso/vdso-layout.lds.S
@@ -6,6 +6,16 @@
  * This script controls its layout.
  */
 
+#if defined(BUILD_VDSO64)
+# define SHDR_SIZE 64
+#elif defined(BUILD_VDSO32) || defined(BUILD_VDSOX32)
+# define SHDR_SIZE 40
+#else
+# error unknown VDSO target
+#endif
+
+#define NUM_FAKE_SHDRS 16
+
 SECTIONS
 {
 	. = SIZEOF_HEADERS;
@@ -25,15 +35,29 @@ SECTIONS
 
 	.dynamic	: { *(.dynamic) }		:text	:dynamic
 
-	.rodata		: { *(.rodata*) }		:text
+	.rodata		: {
+		*(.rodata*)
+
+		/*
+		 * Ideally this would live in a C file, but that won't
+		 * work cleanly for x32 until we start building the x32
+		 * C code using an x32 toolchain.
+		 */
+		VDSO_FAKE_SECTION_TABLE_START = .;
+		. = . + NUM_FAKE_SHDRS * SHDR_SIZE;
+		VDSO_FAKE_SECTION_TABLE_END = .;
+	}						:text
+
+	.fake_shstrtab	: { *(.fake_shstrtab) }		:text
+
 	.data		: {
-	      *(.data*)
-	      *(.sdata*)
-	      *(.got.plt) *(.got)
-	      *(.gnu.linkonce.d.*)
-	      *(.bss*)
-	      *(.dynbss*)
-	      *(.gnu.linkonce.b.*)
+		*(.data*)
+		*(.sdata*)
+		*(.got.plt) *(.got)
+		*(.gnu.linkonce.d.*)
+		*(.bss*)
+		*(.dynbss*)
+		*(.gnu.linkonce.b.*)
 	}
 
 	.altinstructions	: { *(.altinstructions) }
diff --git a/arch/x86/vdso/vdso.lds.S b/arch/x86/vdso/vdso.lds.S
index 75e3404..6807932 100644
--- a/arch/x86/vdso/vdso.lds.S
+++ b/arch/x86/vdso/vdso.lds.S
@@ -6,6 +6,8 @@
  * the DSO.
  */
 
+#define BUILD_VDSO64
+
 #include "vdso-layout.lds.S"
 
 /*
diff --git a/arch/x86/vdso/vdso2c.c b/arch/x86/vdso/vdso2c.c
index 7343899..238dbe82 100644
--- a/arch/x86/vdso/vdso2c.c
+++ b/arch/x86/vdso/vdso2c.c
@@ -23,6 +23,8 @@ enum {
 	sym_vvar_page,
 	sym_hpet_page,
 	sym_end_mapping,
+	sym_VDSO_FAKE_SECTION_TABLE_START,
+	sym_VDSO_FAKE_SECTION_TABLE_END,
 };
 
 const int special_pages[] = {
@@ -30,15 +32,26 @@ const int special_pages[] = {
 	sym_hpet_page,
 };
 
-char const * const required_syms[] = {
-	[sym_vvar_page] = "vvar_page",
-	[sym_hpet_page] = "hpet_page",
-	[sym_end_mapping] = "end_mapping",
-	"VDSO32_NOTE_MASK",
-	"VDSO32_SYSENTER_RETURN",
-	"__kernel_vsyscall",
-	"__kernel_sigreturn",
-	"__kernel_rt_sigreturn",
+struct vdso_sym {
+	const char *name;
+	bool export;
+};
+
+struct vdso_sym required_syms[] = {
+	[sym_vvar_page] = {"vvar_page", true},
+	[sym_hpet_page] = {"hpet_page", true},
+	[sym_end_mapping] = {"end_mapping", true},
+	[sym_VDSO_FAKE_SECTION_TABLE_START] = {
+		"VDSO_FAKE_SECTION_TABLE_START", false
+	},
+	[sym_VDSO_FAKE_SECTION_TABLE_END] = {
+		"VDSO_FAKE_SECTION_TABLE_END", false
+	},
+	{"VDSO32_NOTE_MASK", true},
+	{"VDSO32_SYSENTER_RETURN", true},
+	{"__kernel_vsyscall", true},
+	{"__kernel_sigreturn", true},
+	{"__kernel_rt_sigreturn", true},
 };
 
 __attribute__((format(printf, 1, 2))) __attribute__((noreturn))
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index 8e185ce..f01ed4b 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -4,6 +4,116 @@
  * are built for 32-bit userspace.
  */
 
+/*
+ * We're writing a section table for a few reasons:
+ *
+ * The Go runtime had a couple of bugs: it would read the section
+ * table to try to figure out how many dynamic symbols there were (it
+ * shouldn't have looked at the section table at all) and, if there
+ * were no SHT_SYNDYM section table entry, it would use an
+ * uninitialized value for the number of symbols.  An empty DYNSYM
+ * table would work, but I see no reason not to write a valid one (and
+ * keep full performance for old Go programs).  This hack is only
+ * needed on x86_64.
+ *
+ * The bug was introduced on 2012-08-31 by:
+ * https://code.google.com/p/go/source/detail?r=56ea40aac72b
+ * and was fixed on 2014-06-13 by:
+ * https://code.google.com/p/go/source/detail?r=fc1cd5e12595
+ *
+ * Binutils has issues debugging the vDSO: it reads the section table to
+ * find SHT_NOTE; it won't look at PT_NOTE for the in-memory vDSO, which
+ * would break build-id if we removed the section table.  Binutils
+ * also requires that shstrndx != 0.  See:
+ * https://sourceware.org/bugzilla/show_bug.cgi?id=17064
+ *
+ * elfutils might not look for PT_NOTE if there is a section table at
+ * all.  I don't know whether this matters for any practical purpose.
+ *
+ * For simplicity, rather than hacking up a partial section table, we
+ * just write a mostly complete one.  We omit non-dynamic symbols,
+ * though, since they're rather large.
+ *
+ * Once binutils gets fixed, we might be able to drop this for all but
+ * the 64-bit vdso, since build-id only works in kernel RPMs, and
+ * systems that update to new enough kernel RPMs will likely update
+ * binutils in sync.  build-id has never worked for home-built kernel
+ * RPMs without manual symlinking, and I suspect that no one ever does
+ * that.
+ */
+struct BITSFUNC(fake_sections)
+{
+	ELF(Shdr) *table;
+	unsigned long table_offset;
+	int count, max_count;
+
+	int in_shstrndx;
+	unsigned long shstr_offset;
+	const char *shstrtab;
+	size_t shstrtab_len;
+
+	int out_shstrndx;
+};
+
+static unsigned int BITSFUNC(find_shname)(struct BITSFUNC(fake_sections) *out,
+					  const char *name)
+{
+	const char *outname = out->shstrtab;
+	while (outname - out->shstrtab < out->shstrtab_len) {
+		if (!strcmp(name, outname))
+			return (outname - out->shstrtab) + out->shstr_offset;
+		outname += strlen(outname) + 1;
+	}
+
+	if (*name)
+		printf("Warning: could not find output name \"%s\"\n", name);
+	return out->shstr_offset + out->shstrtab_len - 1;  /* Use a null. */
+}
+
+static void BITSFUNC(init_sections)(struct BITSFUNC(fake_sections) *out)
+{
+	if (!out->in_shstrndx)
+		fail("didn't find the fake shstrndx\n");
+
+	memset(out->table, 0, out->max_count * sizeof(ELF(Shdr)));
+
+	if (out->max_count < 1)
+		fail("we need at least two fake output sections\n");
+
+	PUT_LE(&out->table[0].sh_type, SHT_NULL);
+	PUT_LE(&out->table[0].sh_name, BITSFUNC(find_shname)(out, ""));
+
+	out->count = 1;
+}
+
+static void BITSFUNC(copy_section)(struct BITSFUNC(fake_sections) *out,
+				   int in_idx, const ELF(Shdr) *in,
+				   const char *name)
+{
+	uint64_t flags = GET_LE(&in->sh_flags);
+
+	bool copy = flags & SHF_ALLOC;
+
+	if (!copy)
+		return;
+
+	if (out->count >= out->max_count)
+		fail("too many copied sections (max = %d)\n", out->max_count);
+
+	if (in_idx == out->in_shstrndx)
+		out->out_shstrndx = out->count;
+
+	out->table[out->count] = *in;
+	PUT_LE(&out->table[out->count].sh_name,
+	       BITSFUNC(find_shname)(out, name));
+
+	/* elfutils requires that a strtab have the correct type. */
+	if (!strcmp(name, ".fake_shstrtab"))
+		PUT_LE(&out->table[out->count].sh_type, SHT_STRTAB);
+
+	out->count++;
+}
+
 static void BITSFUNC(go)(void *addr, size_t len,
 			 FILE *outfile, const char *name)
 {
@@ -19,7 +129,7 @@ static void BITSFUNC(go)(void *addr, size_t len,
 	const char *secstrings;
 	uint64_t syms[NSYMS] = {};
 
-	uint64_t fake_sections_value = 0, fake_sections_size = 0;
+	struct BITSFUNC(fake_sections) fake_sections = {};
 
 	ELF(Phdr) *pt = (ELF(Phdr) *)(addr + GET_LE(&hdr->e_phoff));
 
@@ -89,23 +199,57 @@ static void BITSFUNC(go)(void *addr, size_t len,
 			GET_LE(&sym->st_name);
 
 		for (k = 0; k < NSYMS; k++) {
-			if (!strcmp(name, required_syms[k])) {
+			if (!strcmp(name, required_syms[k].name)) {
 				if (syms[k]) {
 					fail("duplicate symbol %s\n",
-					     required_syms[k]);
+					     required_syms[k].name);
 				}
 				syms[k] = GET_LE(&sym->st_value);
 			}
 		}
 
-		if (!strcmp(name, "vdso_fake_sections")) {
-			if (fake_sections_value)
-				fail("duplicate vdso_fake_sections\n");
-			fake_sections_value = GET_LE(&sym->st_value);
-			fake_sections_size = GET_LE(&sym->st_size);
+		if (!strcmp(name, "fake_shstrtab")) {
+			ELF(Shdr) *sh;
+
+			fake_sections.in_shstrndx = GET_LE(&sym->st_shndx);
+			fake_sections.shstrtab = addr + GET_LE(&sym->st_value);
+			fake_sections.shstrtab_len = GET_LE(&sym->st_size);
+			sh = addr + GET_LE(&hdr->e_shoff) +
+				GET_LE(&hdr->e_shentsize) *
+				fake_sections.in_shstrndx;
+			fake_sections.shstr_offset = GET_LE(&sym->st_value) -
+				GET_LE(&sh->sh_addr);
 		}
 	}
 
+	/* Build the output section table. */
+	if (!syms[sym_VDSO_FAKE_SECTION_TABLE_START] ||
+	    !syms[sym_VDSO_FAKE_SECTION_TABLE_END])
+		fail("couldn't find fake section table\n");
+	if ((syms[sym_VDSO_FAKE_SECTION_TABLE_END] -
+	     syms[sym_VDSO_FAKE_SECTION_TABLE_START]) % sizeof(ELF(Shdr)))
+		fail("fake section table size isn't a multiple of sizeof(Shdr)\n");
+	fake_sections.table = addr + syms[sym_VDSO_FAKE_SECTION_TABLE_START];
+	fake_sections.table_offset = syms[sym_VDSO_FAKE_SECTION_TABLE_START];
+	fake_sections.max_count = (syms[sym_VDSO_FAKE_SECTION_TABLE_END] -
+				   syms[sym_VDSO_FAKE_SECTION_TABLE_START]) /
+		sizeof(ELF(Shdr));
+
+	BITSFUNC(init_sections)(&fake_sections);
+	for (i = 0; i < GET_LE(&hdr->e_shnum); i++) {
+		ELF(Shdr) *sh = addr + GET_LE(&hdr->e_shoff) +
+			GET_LE(&hdr->e_shentsize) * i;
+		BITSFUNC(copy_section)(&fake_sections, i, sh,
+				       secstrings + GET_LE(&sh->sh_name));
+	}
+	if (!fake_sections.out_shstrndx)
+		fail("didn't generate shstrndx?!?\n");
+
+	PUT_LE(&hdr->e_shoff, fake_sections.table_offset);
+	PUT_LE(&hdr->e_shentsize, sizeof(ELF(Shdr)));
+	PUT_LE(&hdr->e_shnum, fake_sections.count);
+	PUT_LE(&hdr->e_shstrndx, fake_sections.out_shstrndx);
+
 	/* Validate mapping addresses. */
 	for (i = 0; i < sizeof(special_pages) / sizeof(special_pages[0]); i++) {
 		if (!syms[i])
@@ -113,25 +257,17 @@ static void BITSFUNC(go)(void *addr, size_t len,
 
 		if (syms[i] % 4096)
 			fail("%s must be a multiple of 4096\n",
-			     required_syms[i]);
+			     required_syms[i].name);
 		if (syms[i] < data_size)
 			fail("%s must be after the text mapping\n",
-			     required_syms[i]);
+			     required_syms[i].name);
 		if (syms[sym_end_mapping] < syms[i] + 4096)
-			fail("%s overruns end_mapping\n", required_syms[i]);
+			fail("%s overruns end_mapping\n",
+			     required_syms[i].name);
 	}
 	if (syms[sym_end_mapping] % 4096)
 		fail("end_mapping must be a multiple of 4096\n");
 
-	/* Remove sections or use fakes */
-	if (fake_sections_size % sizeof(ELF(Shdr)))
-		fail("vdso_fake_sections size is not a multiple of %ld\n",
-		     (long)sizeof(ELF(Shdr)));
-	PUT_LE(&hdr->e_shoff, fake_sections_value);
-	PUT_LE(&hdr->e_shentsize, fake_sections_value ? sizeof(ELF(Shdr)) : 0);
-	PUT_LE(&hdr->e_shnum, fake_sections_size / sizeof(ELF(Shdr)));
-	PUT_LE(&hdr->e_shstrndx, SHN_UNDEF);
-
 	if (!name) {
 		fwrite(addr, load_size, 1, outfile);
 		return;
@@ -169,9 +305,9 @@ static void BITSFUNC(go)(void *addr, size_t len,
 			(unsigned long)GET_LE(&alt_sec->sh_size));
 	}
 	for (i = 0; i < NSYMS; i++) {
-		if (syms[i])
+		if (required_syms[i].export && syms[i])
 			fprintf(outfile, "\t.sym_%s = 0x%" PRIx64 ",\n",
-				required_syms[i], syms[i]);
+				required_syms[i].name, syms[i]);
 	}
 	fprintf(outfile, "};\n");
 }
diff --git a/arch/x86/vdso/vdso32/vdso-fakesections.c b/arch/x86/vdso/vdso32/vdso-fakesections.c
new file mode 100644
index 0000000..541468e
--- /dev/null
+++ b/arch/x86/vdso/vdso32/vdso-fakesections.c
@@ -0,0 +1 @@
+#include "../vdso-fakesections.c"
diff --git a/arch/x86/vdso/vdsox32.lds.S b/arch/x86/vdso/vdsox32.lds.S
index 46b991b..697c11e 100644
--- a/arch/x86/vdso/vdsox32.lds.S
+++ b/arch/x86/vdso/vdsox32.lds.S
@@ -6,6 +6,8 @@
  * the DSO.
  */
 
+#define BUILD_VDSOX32
+
 #include "vdso-layout.lds.S"
 
 /*
-- 
1.9.3

[PATCH 4/5] x86,vdso: Remove some redundant in-memory section headers

[Andy Lutomirski]

.data doesn't need to be separate from .rodata: they're both readonly.

.altinstructions and .altinstr_replacement aren't needed by anything
except vdso2c; strip them from the final image.

While we're at it, rather than aligning the actual executable text,
just shove some unused-at-runtime data in between real data and
text.

My vdso image is still above 4k, but I'm disinclined to try to
trim it harder for 3.16.  For future trimming, I suspect that these
sections could be moved to later in the file and dropped from
the in-memory image:

.gnu.version and .gnu.version_d   (this may lose versions in gdb)
.eh_frame                         (should be harmless)
.eh_frame_hdr                     (I'm not really sure)
.hash                             (AFAIK nothing needs this section header)

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/vdso-fakesections.c |  3 ---
 arch/x86/vdso/vdso-layout.lds.S   | 43 +++++++++++++++++++++------------------
 arch/x86/vdso/vdso2c.h            |  4 +++-
 3 files changed, 26 insertions(+), 24 deletions(-)

diff --git a/arch/x86/vdso/vdso-fakesections.c b/arch/x86/vdso/vdso-fakesections.c
index 56927a7..aa5fbfa 100644
--- a/arch/x86/vdso/vdso-fakesections.c
+++ b/arch/x86/vdso/vdso-fakesections.c
@@ -16,9 +16,6 @@ const char fake_shstrtab[] __attribute__((section(".fake_shstrtab"))) =
 	".rodata\0"
 	".fake_shstrtab\0"  /* Yay, self-referential code. */
 	".note\0"
-	".data\0"
-	".altinstructions\0"
-	".altinstr_replacement\0"
 	".eh_frame_hdr\0"
 	".eh_frame\0"
 	".text";
diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/vdso/vdso-layout.lds.S
index e4cbc21..9197544 100644
--- a/arch/x86/vdso/vdso-layout.lds.S
+++ b/arch/x86/vdso/vdso-layout.lds.S
@@ -14,7 +14,7 @@
 # error unknown VDSO target
 #endif
 
-#define NUM_FAKE_SHDRS 16
+#define NUM_FAKE_SHDRS 13
 
 SECTIONS
 {
@@ -28,15 +28,17 @@ SECTIONS
 	.gnu.version_d	: { *(.gnu.version_d) }
 	.gnu.version_r	: { *(.gnu.version_r) }
 
-	.note		: { *(.note.*) }		:text	:note
-
-	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
-	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
-
 	.dynamic	: { *(.dynamic) }		:text	:dynamic
 
 	.rodata		: {
 		*(.rodata*)
+		*(.data*)
+		*(.sdata*)
+		*(.got.plt) *(.got)
+		*(.gnu.linkonce.d.*)
+		*(.bss*)
+		*(.dynbss*)
+		*(.gnu.linkonce.b.*)
 
 		/*
 		 * Ideally this would live in a C file, but that won't
@@ -50,28 +52,29 @@ SECTIONS
 
 	.fake_shstrtab	: { *(.fake_shstrtab) }		:text
 
-	.data		: {
-		*(.data*)
-		*(.sdata*)
-		*(.got.plt) *(.got)
-		*(.gnu.linkonce.d.*)
-		*(.bss*)
-		*(.dynbss*)
-		*(.gnu.linkonce.b.*)
-	}
 
-	.altinstructions	: { *(.altinstructions) }
-	.altinstr_replacement	: { *(.altinstr_replacement) }
+	.note		: { *(.note.*) }		:text	:note
+
+	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
+	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
+
 
 	/*
-	 * Align the actual code well away from the non-instruction data.
-	 * This is the best thing for the I-cache.
+	 * Text is well-separated from actual data: there's plenty of
+	 * stuff that isn't used at runtime in between.
 	 */
-	. = ALIGN(0x100);
 
 	.text		: { *(.text*) }			:text	=0x90909090,
 
 	/*
+	 * At the end so that eu-elflint stays happy when vdso2c strips
+	 * these.  A better implementation would avoid allocating space
+	 * for these.
+	 */
+	.altinstructions	: { *(.altinstructions) }	:text
+	.altinstr_replacement	: { *(.altinstr_replacement) }	:text
+
+	/*
 	 * The remainder of the vDSO consists of special pages that are
 	 * shared between the kernel and userspace.  It needs to be at the
 	 * end so that it doesn't overlap the mapping of the actual
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index f01ed4b..f42e2dd 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -92,7 +92,9 @@ static void BITSFUNC(copy_section)(struct BITSFUNC(fake_sections) *out,
 {
 	uint64_t flags = GET_LE(&in->sh_flags);
 
-	bool copy = flags & SHF_ALLOC;
+	bool copy = flags & SHF_ALLOC &&
+		strcmp(name, ".altinstructions") &&
+		strcmp(name, ".altinstr_replacement");
 
 	if (!copy)
 		return;
-- 
1.9.3

[PATCH 5/5] x86,vdso: Create .build-id links for unstripped vdso files

[Andy Lutomirski]

With this change, doing 'make vdso_install' and telling gdb:

set debug-file-directory /lib/modules/KVER/vdso

will enable vdso debugging with symbols.  This is useful for
testing, but kernel RPM builds will probably want to manually delete
these symlinks or otherwise do something sensible when they strip
the vdso/*.so files.

This may break make vdso_install with binutils before 2.17.50.0.17.
On the other hand, make vdso_install was probably never useful with
earlier binutils, since the installed files are AFAIK completely
useless without build-id.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/Makefile | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 2c1ca98..ac16c17 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -176,7 +176,14 @@ GCOV_PROFILE := n
 # Install the unstripped copies of vdso*.so.
 #
 quiet_cmd_vdso_install = INSTALL $(@:install_%=%)
-      cmd_vdso_install = cp $< $(MODLIB)/vdso/$(@:install_%=%)
+define cmd_vdso_install
+	buildid=`readelf -n $< |grep 'Build ID' |sed -e 's/^.*Build ID: \(.*\)$$/\1/'`; \
+	first=`echo $$buildid | cut -b-2`; \
+	last=`echo $$buildid | cut -b3-`; \
+	cp $< "$(MODLIB)/vdso/$(@:install_%=%)"; \
+	mkdir -p "$(MODLIB)/vdso/.build-id/$$first"; \
+	ln -sf "../../$(@:install_%=%)" "$(MODLIB)/vdso/.build-id/$$first/$$last.debug"
+endef
 
 vdso_img_insttargets := $(vdso_img_sodbg:%.dbg=install_%)
 
-- 
1.9.3

Re: [PATCH 0/5] x86,vdso: Restore a bunch of section headers

[H. Peter Anvin]

On 06/18/2014 03:59 PM, Andy Lutomirski wrote:
> This series makes me sad.  It brings the 64-bit vdso back above 4kB,
> like it was in 3.15.  It's also just silly, but it seems to be
> needed to keep binutils happy when debugging the vdso.

Oh well... it is only a single page across the entire kernel... there
are worse things in the world.

	-hpa

Re: [PATCH 5/5] x86,vdso: Create .build-id links for unstripped vdso files

[H. Peter Anvin]

On 06/18/2014 03:59 PM, Andy Lutomirski wrote:
> 
> This may break make vdso_install with binutils before 2.17.50.0.17.
> On the other hand, make vdso_install was probably never useful with
> earlier binutils, since the installed files are AFAIK completely
> useless without build-id.
> 

How does it fail?

	-hpa

Re: [PATCH 5/5] x86,vdso: Create .build-id links for unstripped vdso files

[Andy Lutomirski]

On Thu, Jun 19, 2014 at 3:46 PM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 06/18/2014 03:59 PM, Andy Lutomirski wrote:
>>
>> This may break make vdso_install with binutils before 2.17.50.0.17.
>> On the other hand, make vdso_install was probably never useful with
>> earlier binutils, since the installed files are AFAIK completely
>> useless without build-id.
>>
>
> How does it fail?

If --build-id=none on modern binutils accurately replicates old
binutils, it fails by silently creating a broken symlink called
.debug.  If you want this patch for 3.16, I can send a better version
that just doesn't create the links on old binutils.

>
>         -hpa
>
>



-- 
Andy Lutomirski
AMA Capital Management, LLC

[tip:x86/urgent] x86/vdso: Discard the __bug_table section

[tip-bot for Andy Lutomirski]

Commit-ID:  5f56e7167e6d438324fcba87018255d81e201383
Gitweb:     http://git.kernel.org/tip/5f56e7167e6d438324fcba87018255d81e201383
Author:     Andy Lutomirski <luto@amacapital.net>
AuthorDate: Wed, 18 Jun 2014 15:59:46 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 19 Jun 2014 15:44:51 -0700

x86/vdso: Discard the __bug_table section

It serves no purpose in user code.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/2a5bebff42defd8a5e81d96f7dc00f21143c80e8.1403129369.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/vdso/vdso-layout.lds.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/vdso/vdso-layout.lds.S
index 2ec72f6..c84166c 100644
--- a/arch/x86/vdso/vdso-layout.lds.S
+++ b/arch/x86/vdso/vdso-layout.lds.S
@@ -75,6 +75,7 @@ SECTIONS
 	/DISCARD/ : {
 		*(.discard)
 		*(.discard.*)
+		*(__bug_table)
 	}
 }
 

[tip:x86/urgent] x86/vdso2c: Use better macros for ELF bitness

[tip-bot for Andy Lutomirski]

Commit-ID:  c1979c370273fd9f7326ffa27a63b9ddb0f495f4
Gitweb:     http://git.kernel.org/tip/c1979c370273fd9f7326ffa27a63b9ddb0f495f4
Author:     Andy Lutomirski <luto@amacapital.net>
AuthorDate: Wed, 18 Jun 2014 15:59:47 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 19 Jun 2014 15:44:59 -0700

x86/vdso2c: Use better macros for ELF bitness

Rather than using a separate macro for each replacement, use generic
macros.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/d953cd2e70ceee1400985d091188cdd65fba2f05.1403129369.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/vdso/vdso2c.c | 42 +++++++++++++-----------------------------
 arch/x86/vdso/vdso2c.h | 23 ++++++++++++-----------
 2 files changed, 25 insertions(+), 40 deletions(-)

diff --git a/arch/x86/vdso/vdso2c.c b/arch/x86/vdso/vdso2c.c
index 7a6bf50..7343899 100644
--- a/arch/x86/vdso/vdso2c.c
+++ b/arch/x86/vdso/vdso2c.c
@@ -83,37 +83,21 @@ extern void bad_put_le(void);
 
 #define NSYMS (sizeof(required_syms) / sizeof(required_syms[0]))
 
-#define BITS 64
-#define GOFUNC go64
-#define Elf_Ehdr Elf64_Ehdr
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Phdr Elf64_Phdr
-#define Elf_Sym Elf64_Sym
-#define Elf_Dyn Elf64_Dyn
+#define BITSFUNC3(name, bits) name##bits
+#define BITSFUNC2(name, bits) BITSFUNC3(name, bits)
+#define BITSFUNC(name) BITSFUNC2(name, ELF_BITS)
+
+#define ELF_BITS_XFORM2(bits, x) Elf##bits##_##x
+#define ELF_BITS_XFORM(bits, x) ELF_BITS_XFORM2(bits, x)
+#define ELF(x) ELF_BITS_XFORM(ELF_BITS, x)
+
+#define ELF_BITS 64
 #include "vdso2c.h"
-#undef BITS
-#undef GOFUNC
-#undef Elf_Ehdr
-#undef Elf_Shdr
-#undef Elf_Phdr
-#undef Elf_Sym
-#undef Elf_Dyn
-
-#define BITS 32
-#define GOFUNC go32
-#define Elf_Ehdr Elf32_Ehdr
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Phdr Elf32_Phdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Dyn Elf32_Dyn
+#undef ELF_BITS
+
+#define ELF_BITS 32
 #include "vdso2c.h"
-#undef BITS
-#undef GOFUNC
-#undef Elf_Ehdr
-#undef Elf_Shdr
-#undef Elf_Phdr
-#undef Elf_Sym
-#undef Elf_Dyn
+#undef ELF_BITS
 
 static void go(void *addr, size_t len, FILE *outfile, const char *name)
 {
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index c6eefaf..8e185ce 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -4,23 +4,24 @@
  * are built for 32-bit userspace.
  */
 
-static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name)
+static void BITSFUNC(go)(void *addr, size_t len,
+			 FILE *outfile, const char *name)
 {
 	int found_load = 0;
 	unsigned long load_size = -1;  /* Work around bogus warning */
 	unsigned long data_size;
-	Elf_Ehdr *hdr = (Elf_Ehdr *)addr;
+	ELF(Ehdr) *hdr = (ELF(Ehdr) *)addr;
 	int i;
 	unsigned long j;
-	Elf_Shdr *symtab_hdr = NULL, *strtab_hdr, *secstrings_hdr,
+	ELF(Shdr) *symtab_hdr = NULL, *strtab_hdr, *secstrings_hdr,
 		*alt_sec = NULL;
-	Elf_Dyn *dyn = 0, *dyn_end = 0;
+	ELF(Dyn) *dyn = 0, *dyn_end = 0;
 	const char *secstrings;
 	uint64_t syms[NSYMS] = {};
 
 	uint64_t fake_sections_value = 0, fake_sections_size = 0;
 
-	Elf_Phdr *pt = (Elf_Phdr *)(addr + GET_LE(&hdr->e_phoff));
+	ELF(Phdr) *pt = (ELF(Phdr) *)(addr + GET_LE(&hdr->e_phoff));
 
 	/* Walk the segment table. */
 	for (i = 0; i < GET_LE(&hdr->e_phnum); i++) {
@@ -61,7 +62,7 @@ static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name)
 		GET_LE(&hdr->e_shentsize)*GET_LE(&hdr->e_shstrndx);
 	secstrings = addr + GET_LE(&secstrings_hdr->sh_offset);
 	for (i = 0; i < GET_LE(&hdr->e_shnum); i++) {
-		Elf_Shdr *sh = addr + GET_LE(&hdr->e_shoff) +
+		ELF(Shdr) *sh = addr + GET_LE(&hdr->e_shoff) +
 			GET_LE(&hdr->e_shentsize) * i;
 		if (GET_LE(&sh->sh_type) == SHT_SYMTAB)
 			symtab_hdr = sh;
@@ -82,7 +83,7 @@ static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name)
 	     i < GET_LE(&symtab_hdr->sh_size) / GET_LE(&symtab_hdr->sh_entsize);
 	     i++) {
 		int k;
-		Elf_Sym *sym = addr + GET_LE(&symtab_hdr->sh_offset) +
+		ELF(Sym) *sym = addr + GET_LE(&symtab_hdr->sh_offset) +
 			GET_LE(&symtab_hdr->sh_entsize) * i;
 		const char *name = addr + GET_LE(&strtab_hdr->sh_offset) +
 			GET_LE(&sym->st_name);
@@ -123,12 +124,12 @@ static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name)
 		fail("end_mapping must be a multiple of 4096\n");
 
 	/* Remove sections or use fakes */
-	if (fake_sections_size % sizeof(Elf_Shdr))
+	if (fake_sections_size % sizeof(ELF(Shdr)))
 		fail("vdso_fake_sections size is not a multiple of %ld\n",
-		     (long)sizeof(Elf_Shdr));
+		     (long)sizeof(ELF(Shdr)));
 	PUT_LE(&hdr->e_shoff, fake_sections_value);
-	PUT_LE(&hdr->e_shentsize, fake_sections_value ? sizeof(Elf_Shdr) : 0);
-	PUT_LE(&hdr->e_shnum, fake_sections_size / sizeof(Elf_Shdr));
+	PUT_LE(&hdr->e_shentsize, fake_sections_value ? sizeof(ELF(Shdr)) : 0);
+	PUT_LE(&hdr->e_shnum, fake_sections_size / sizeof(ELF(Shdr)));
 	PUT_LE(&hdr->e_shstrndx, SHN_UNDEF);
 
 	if (!name) {

[tip:x86/urgent] x86/vdso: Improve the fake section headers

[tip-bot for Andy Lutomirski]

Commit-ID:  bfad381c0d1e19cae8461e105d8d4387dd2a14fe
Gitweb:     http://git.kernel.org/tip/bfad381c0d1e19cae8461e105d8d4387dd2a14fe
Author:     Andy Lutomirski <luto@amacapital.net>
AuthorDate: Wed, 18 Jun 2014 15:59:48 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 19 Jun 2014 15:45:12 -0700

x86/vdso: Improve the fake section headers

Fully stripping the vDSO has other unfortunate side effects:

 - binutils is unable to find ELF notes without a SHT_NOTE section.

 - Even elfutils has trouble: it can find ELF notes without a section
   table at all, but if a section table is present, it won't look for
   PT_NOTE.

 - gdb wants section names to match between stripped DSOs and their
   symbols; otherwise it will corrupt symbol addresses.

We're also breaking the rules: section 0 is supposed to be SHT_NULL.

Fix these problems by building a better fake section table.  While
we're at it, we might as well let buggy Go versions keep working well
by giving the SHT_DYNSYM entry the correct size.

This is a bit unfortunate: it adds quite a bit of size to the vdso
image.

If/when binutils improves and the improved versions become widespread,
it would be worth considering dropping most of this.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/0e546a5eeaafdf1840e6ee654a55c1e727c26663.1403129369.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/vdso/Makefile                   |   4 +-
 arch/x86/vdso/vdso-fakesections.c        |  44 ++++----
 arch/x86/vdso/vdso-layout.lds.S          |  40 +++++--
 arch/x86/vdso/vdso.lds.S                 |   2 +
 arch/x86/vdso/vdso2c.c                   |  31 ++++--
 arch/x86/vdso/vdso2c.h                   | 180 +++++++++++++++++++++++++++----
 arch/x86/vdso/vdso32/vdso-fakesections.c |   1 +
 arch/x86/vdso/vdsox32.lds.S              |   2 +
 8 files changed, 237 insertions(+), 67 deletions(-)

diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 3c0809a..2c1ca98 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -11,7 +11,6 @@ VDSO32-$(CONFIG_COMPAT)		:= y
 
 # files to link into the vdso
 vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o vdso-fakesections.o
-vobjs-nox32 := vdso-fakesections.o
 
 # files to link into kernel
 obj-y				+= vma.o
@@ -134,7 +133,7 @@ override obj-dirs = $(dir $(obj)) $(obj)/vdso32/
 
 targets += vdso32/vdso32.lds
 targets += vdso32/note.o vdso32/vclock_gettime.o $(vdso32.so-y:%=vdso32/%.o)
-targets += vdso32/vclock_gettime.o
+targets += vdso32/vclock_gettime.o vdso32/vdso-fakesections.o
 
 $(obj)/vdso32.o: $(vdso32-images:%=$(obj)/%)
 
@@ -155,6 +154,7 @@ $(vdso32-images:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
 $(vdso32-images:%=$(obj)/%.dbg): $(obj)/vdso32-%.so.dbg: FORCE \
 				 $(obj)/vdso32/vdso32.lds \
 				 $(obj)/vdso32/vclock_gettime.o \
+				 $(obj)/vdso32/vdso-fakesections.o \
 				 $(obj)/vdso32/note.o \
 				 $(obj)/vdso32/%.o
 	$(call if_changed,vdso)
diff --git a/arch/x86/vdso/vdso-fakesections.c b/arch/x86/vdso/vdso-fakesections.c
index cb8a8d7..56927a7 100644
--- a/arch/x86/vdso/vdso-fakesections.c
+++ b/arch/x86/vdso/vdso-fakesections.c
@@ -2,31 +2,23 @@
  * Copyright 2014 Andy Lutomirski
  * Subject to the GNU Public License, v.2
  *
- * Hack to keep broken Go programs working.
- *
- * The Go runtime had a couple of bugs: it would read the section table to try
- * to figure out how many dynamic symbols there were (it shouldn't have looked
- * at the section table at all) and, if there were no SHT_SYNDYM section table
- * entry, it would use an uninitialized value for the number of symbols.  As a
- * workaround, we supply a minimal section table.  vdso2c will adjust the
- * in-memory image so that "vdso_fake_sections" becomes the section table.
- *
- * The bug was introduced by:
- * https://code.google.com/p/go/source/detail?r=56ea40aac72b (2012-08-31)
- * and is being addressed in the Go runtime in this issue:
- * https://code.google.com/p/go/issues/detail?id=8197
+ * String table for loadable section headers.  See vdso2c.h for why
+ * this exists.
  */
 
-#ifndef __x86_64__
-#error This hack is specific to the 64-bit vDSO
-#endif
-
-#include <linux/elf.h>
-
-extern const __visible struct elf64_shdr vdso_fake_sections[];
-const __visible struct elf64_shdr vdso_fake_sections[] = {
-	{
-		.sh_type = SHT_DYNSYM,
-		.sh_entsize = sizeof(Elf64_Sym),
-	}
-};
+const char fake_shstrtab[] __attribute__((section(".fake_shstrtab"))) =
+	".hash\0"
+	".dynsym\0"
+	".dynstr\0"
+	".gnu.version\0"
+	".gnu.version_d\0"
+	".dynamic\0"
+	".rodata\0"
+	".fake_shstrtab\0"  /* Yay, self-referential code. */
+	".note\0"
+	".data\0"
+	".altinstructions\0"
+	".altinstr_replacement\0"
+	".eh_frame_hdr\0"
+	".eh_frame\0"
+	".text";
diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/vdso/vdso-layout.lds.S
index c84166c..e4cbc21 100644
--- a/arch/x86/vdso/vdso-layout.lds.S
+++ b/arch/x86/vdso/vdso-layout.lds.S
@@ -6,6 +6,16 @@
  * This script controls its layout.
  */
 
+#if defined(BUILD_VDSO64)
+# define SHDR_SIZE 64
+#elif defined(BUILD_VDSO32) || defined(BUILD_VDSOX32)
+# define SHDR_SIZE 40
+#else
+# error unknown VDSO target
+#endif
+
+#define NUM_FAKE_SHDRS 16
+
 SECTIONS
 {
 	. = SIZEOF_HEADERS;
@@ -25,15 +35,29 @@ SECTIONS
 
 	.dynamic	: { *(.dynamic) }		:text	:dynamic
 
-	.rodata		: { *(.rodata*) }		:text
+	.rodata		: {
+		*(.rodata*)
+
+		/*
+		 * Ideally this would live in a C file, but that won't
+		 * work cleanly for x32 until we start building the x32
+		 * C code using an x32 toolchain.
+		 */
+		VDSO_FAKE_SECTION_TABLE_START = .;
+		. = . + NUM_FAKE_SHDRS * SHDR_SIZE;
+		VDSO_FAKE_SECTION_TABLE_END = .;
+	}						:text
+
+	.fake_shstrtab	: { *(.fake_shstrtab) }		:text
+
 	.data		: {
-	      *(.data*)
-	      *(.sdata*)
-	      *(.got.plt) *(.got)
-	      *(.gnu.linkonce.d.*)
-	      *(.bss*)
-	      *(.dynbss*)
-	      *(.gnu.linkonce.b.*)
+		*(.data*)
+		*(.sdata*)
+		*(.got.plt) *(.got)
+		*(.gnu.linkonce.d.*)
+		*(.bss*)
+		*(.dynbss*)
+		*(.gnu.linkonce.b.*)
 	}
 
 	.altinstructions	: { *(.altinstructions) }
diff --git a/arch/x86/vdso/vdso.lds.S b/arch/x86/vdso/vdso.lds.S
index 75e3404..6807932 100644
--- a/arch/x86/vdso/vdso.lds.S
+++ b/arch/x86/vdso/vdso.lds.S
@@ -6,6 +6,8 @@
  * the DSO.
  */
 
+#define BUILD_VDSO64
+
 #include "vdso-layout.lds.S"
 
 /*
diff --git a/arch/x86/vdso/vdso2c.c b/arch/x86/vdso/vdso2c.c
index 7343899..238dbe82 100644
--- a/arch/x86/vdso/vdso2c.c
+++ b/arch/x86/vdso/vdso2c.c
@@ -23,6 +23,8 @@ enum {
 	sym_vvar_page,
 	sym_hpet_page,
 	sym_end_mapping,
+	sym_VDSO_FAKE_SECTION_TABLE_START,
+	sym_VDSO_FAKE_SECTION_TABLE_END,
 };
 
 const int special_pages[] = {
@@ -30,15 +32,26 @@ const int special_pages[] = {
 	sym_hpet_page,
 };
 
-char const * const required_syms[] = {
-	[sym_vvar_page] = "vvar_page",
-	[sym_hpet_page] = "hpet_page",
-	[sym_end_mapping] = "end_mapping",
-	"VDSO32_NOTE_MASK",
-	"VDSO32_SYSENTER_RETURN",
-	"__kernel_vsyscall",
-	"__kernel_sigreturn",
-	"__kernel_rt_sigreturn",
+struct vdso_sym {
+	const char *name;
+	bool export;
+};
+
+struct vdso_sym required_syms[] = {
+	[sym_vvar_page] = {"vvar_page", true},
+	[sym_hpet_page] = {"hpet_page", true},
+	[sym_end_mapping] = {"end_mapping", true},
+	[sym_VDSO_FAKE_SECTION_TABLE_START] = {
+		"VDSO_FAKE_SECTION_TABLE_START", false
+	},
+	[sym_VDSO_FAKE_SECTION_TABLE_END] = {
+		"VDSO_FAKE_SECTION_TABLE_END", false
+	},
+	{"VDSO32_NOTE_MASK", true},
+	{"VDSO32_SYSENTER_RETURN", true},
+	{"__kernel_vsyscall", true},
+	{"__kernel_sigreturn", true},
+	{"__kernel_rt_sigreturn", true},
 };
 
 __attribute__((format(printf, 1, 2))) __attribute__((noreturn))
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index 8e185ce..f01ed4b 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -4,6 +4,116 @@
  * are built for 32-bit userspace.
  */
 
+/*
+ * We're writing a section table for a few reasons:
+ *
+ * The Go runtime had a couple of bugs: it would read the section
+ * table to try to figure out how many dynamic symbols there were (it
+ * shouldn't have looked at the section table at all) and, if there
+ * were no SHT_SYNDYM section table entry, it would use an
+ * uninitialized value for the number of symbols.  An empty DYNSYM
+ * table would work, but I see no reason not to write a valid one (and
+ * keep full performance for old Go programs).  This hack is only
+ * needed on x86_64.
+ *
+ * The bug was introduced on 2012-08-31 by:
+ * https://code.google.com/p/go/source/detail?r=56ea40aac72b
+ * and was fixed on 2014-06-13 by:
+ * https://code.google.com/p/go/source/detail?r=fc1cd5e12595
+ *
+ * Binutils has issues debugging the vDSO: it reads the section table to
+ * find SHT_NOTE; it won't look at PT_NOTE for the in-memory vDSO, which
+ * would break build-id if we removed the section table.  Binutils
+ * also requires that shstrndx != 0.  See:
+ * https://sourceware.org/bugzilla/show_bug.cgi?id=17064
+ *
+ * elfutils might not look for PT_NOTE if there is a section table at
+ * all.  I don't know whether this matters for any practical purpose.
+ *
+ * For simplicity, rather than hacking up a partial section table, we
+ * just write a mostly complete one.  We omit non-dynamic symbols,
+ * though, since they're rather large.
+ *
+ * Once binutils gets fixed, we might be able to drop this for all but
+ * the 64-bit vdso, since build-id only works in kernel RPMs, and
+ * systems that update to new enough kernel RPMs will likely update
+ * binutils in sync.  build-id has never worked for home-built kernel
+ * RPMs without manual symlinking, and I suspect that no one ever does
+ * that.
+ */
+struct BITSFUNC(fake_sections)
+{
+	ELF(Shdr) *table;
+	unsigned long table_offset;
+	int count, max_count;
+
+	int in_shstrndx;
+	unsigned long shstr_offset;
+	const char *shstrtab;
+	size_t shstrtab_len;
+
+	int out_shstrndx;
+};
+
+static unsigned int BITSFUNC(find_shname)(struct BITSFUNC(fake_sections) *out,
+					  const char *name)
+{
+	const char *outname = out->shstrtab;
+	while (outname - out->shstrtab < out->shstrtab_len) {
+		if (!strcmp(name, outname))
+			return (outname - out->shstrtab) + out->shstr_offset;
+		outname += strlen(outname) + 1;
+	}
+
+	if (*name)
+		printf("Warning: could not find output name \"%s\"\n", name);
+	return out->shstr_offset + out->shstrtab_len - 1;  /* Use a null. */
+}
+
+static void BITSFUNC(init_sections)(struct BITSFUNC(fake_sections) *out)
+{
+	if (!out->in_shstrndx)
+		fail("didn't find the fake shstrndx\n");
+
+	memset(out->table, 0, out->max_count * sizeof(ELF(Shdr)));
+
+	if (out->max_count < 1)
+		fail("we need at least two fake output sections\n");
+
+	PUT_LE(&out->table[0].sh_type, SHT_NULL);
+	PUT_LE(&out->table[0].sh_name, BITSFUNC(find_shname)(out, ""));
+
+	out->count = 1;
+}
+
+static void BITSFUNC(copy_section)(struct BITSFUNC(fake_sections) *out,
+				   int in_idx, const ELF(Shdr) *in,
+				   const char *name)
+{
+	uint64_t flags = GET_LE(&in->sh_flags);
+
+	bool copy = flags & SHF_ALLOC;
+
+	if (!copy)
+		return;
+
+	if (out->count >= out->max_count)
+		fail("too many copied sections (max = %d)\n", out->max_count);
+
+	if (in_idx == out->in_shstrndx)
+		out->out_shstrndx = out->count;
+
+	out->table[out->count] = *in;
+	PUT_LE(&out->table[out->count].sh_name,
+	       BITSFUNC(find_shname)(out, name));
+
+	/* elfutils requires that a strtab have the correct type. */
+	if (!strcmp(name, ".fake_shstrtab"))
+		PUT_LE(&out->table[out->count].sh_type, SHT_STRTAB);
+
+	out->count++;
+}
+
 static void BITSFUNC(go)(void *addr, size_t len,
 			 FILE *outfile, const char *name)
 {
@@ -19,7 +129,7 @@ static void BITSFUNC(go)(void *addr, size_t len,
 	const char *secstrings;
 	uint64_t syms[NSYMS] = {};
 
-	uint64_t fake_sections_value = 0, fake_sections_size = 0;
+	struct BITSFUNC(fake_sections) fake_sections = {};
 
 	ELF(Phdr) *pt = (ELF(Phdr) *)(addr + GET_LE(&hdr->e_phoff));
 
@@ -89,23 +199,57 @@ static void BITSFUNC(go)(void *addr, size_t len,
 			GET_LE(&sym->st_name);
 
 		for (k = 0; k < NSYMS; k++) {
-			if (!strcmp(name, required_syms[k])) {
+			if (!strcmp(name, required_syms[k].name)) {
 				if (syms[k]) {
 					fail("duplicate symbol %s\n",
-					     required_syms[k]);
+					     required_syms[k].name);
 				}
 				syms[k] = GET_LE(&sym->st_value);
 			}
 		}
 
-		if (!strcmp(name, "vdso_fake_sections")) {
-			if (fake_sections_value)
-				fail("duplicate vdso_fake_sections\n");
-			fake_sections_value = GET_LE(&sym->st_value);
-			fake_sections_size = GET_LE(&sym->st_size);
+		if (!strcmp(name, "fake_shstrtab")) {
+			ELF(Shdr) *sh;
+
+			fake_sections.in_shstrndx = GET_LE(&sym->st_shndx);
+			fake_sections.shstrtab = addr + GET_LE(&sym->st_value);
+			fake_sections.shstrtab_len = GET_LE(&sym->st_size);
+			sh = addr + GET_LE(&hdr->e_shoff) +
+				GET_LE(&hdr->e_shentsize) *
+				fake_sections.in_shstrndx;
+			fake_sections.shstr_offset = GET_LE(&sym->st_value) -
+				GET_LE(&sh->sh_addr);
 		}
 	}
 
+	/* Build the output section table. */
+	if (!syms[sym_VDSO_FAKE_SECTION_TABLE_START] ||
+	    !syms[sym_VDSO_FAKE_SECTION_TABLE_END])
+		fail("couldn't find fake section table\n");
+	if ((syms[sym_VDSO_FAKE_SECTION_TABLE_END] -
+	     syms[sym_VDSO_FAKE_SECTION_TABLE_START]) % sizeof(ELF(Shdr)))
+		fail("fake section table size isn't a multiple of sizeof(Shdr)\n");
+	fake_sections.table = addr + syms[sym_VDSO_FAKE_SECTION_TABLE_START];
+	fake_sections.table_offset = syms[sym_VDSO_FAKE_SECTION_TABLE_START];
+	fake_sections.max_count = (syms[sym_VDSO_FAKE_SECTION_TABLE_END] -
+				   syms[sym_VDSO_FAKE_SECTION_TABLE_START]) /
+		sizeof(ELF(Shdr));
+
+	BITSFUNC(init_sections)(&fake_sections);
+	for (i = 0; i < GET_LE(&hdr->e_shnum); i++) {
+		ELF(Shdr) *sh = addr + GET_LE(&hdr->e_shoff) +
+			GET_LE(&hdr->e_shentsize) * i;
+		BITSFUNC(copy_section)(&fake_sections, i, sh,
+				       secstrings + GET_LE(&sh->sh_name));
+	}
+	if (!fake_sections.out_shstrndx)
+		fail("didn't generate shstrndx?!?\n");
+
+	PUT_LE(&hdr->e_shoff, fake_sections.table_offset);
+	PUT_LE(&hdr->e_shentsize, sizeof(ELF(Shdr)));
+	PUT_LE(&hdr->e_shnum, fake_sections.count);
+	PUT_LE(&hdr->e_shstrndx, fake_sections.out_shstrndx);
+
 	/* Validate mapping addresses. */
 	for (i = 0; i < sizeof(special_pages) / sizeof(special_pages[0]); i++) {
 		if (!syms[i])
@@ -113,25 +257,17 @@ static void BITSFUNC(go)(void *addr, size_t len,
 
 		if (syms[i] % 4096)
 			fail("%s must be a multiple of 4096\n",
-			     required_syms[i]);
+			     required_syms[i].name);
 		if (syms[i] < data_size)
 			fail("%s must be after the text mapping\n",
-			     required_syms[i]);
+			     required_syms[i].name);
 		if (syms[sym_end_mapping] < syms[i] + 4096)
-			fail("%s overruns end_mapping\n", required_syms[i]);
+			fail("%s overruns end_mapping\n",
+			     required_syms[i].name);
 	}
 	if (syms[sym_end_mapping] % 4096)
 		fail("end_mapping must be a multiple of 4096\n");
 
-	/* Remove sections or use fakes */
-	if (fake_sections_size % sizeof(ELF(Shdr)))
-		fail("vdso_fake_sections size is not a multiple of %ld\n",
-		     (long)sizeof(ELF(Shdr)));
-	PUT_LE(&hdr->e_shoff, fake_sections_value);
-	PUT_LE(&hdr->e_shentsize, fake_sections_value ? sizeof(ELF(Shdr)) : 0);
-	PUT_LE(&hdr->e_shnum, fake_sections_size / sizeof(ELF(Shdr)));
-	PUT_LE(&hdr->e_shstrndx, SHN_UNDEF);
-
 	if (!name) {
 		fwrite(addr, load_size, 1, outfile);
 		return;
@@ -169,9 +305,9 @@ static void BITSFUNC(go)(void *addr, size_t len,
 			(unsigned long)GET_LE(&alt_sec->sh_size));
 	}
 	for (i = 0; i < NSYMS; i++) {
-		if (syms[i])
+		if (required_syms[i].export && syms[i])
 			fprintf(outfile, "\t.sym_%s = 0x%" PRIx64 ",\n",
-				required_syms[i], syms[i]);
+				required_syms[i].name, syms[i]);
 	}
 	fprintf(outfile, "};\n");
 }
diff --git a/arch/x86/vdso/vdso32/vdso-fakesections.c b/arch/x86/vdso/vdso32/vdso-fakesections.c
new file mode 100644
index 0000000..541468e
--- /dev/null
+++ b/arch/x86/vdso/vdso32/vdso-fakesections.c
@@ -0,0 +1 @@
+#include "../vdso-fakesections.c"
diff --git a/arch/x86/vdso/vdsox32.lds.S b/arch/x86/vdso/vdsox32.lds.S
index 46b991b..697c11e 100644
--- a/arch/x86/vdso/vdsox32.lds.S
+++ b/arch/x86/vdso/vdsox32.lds.S
@@ -6,6 +6,8 @@
  * the DSO.
  */
 
+#define BUILD_VDSOX32
+
 #include "vdso-layout.lds.S"
 
 /*

[tip:x86/urgent] x86/vdso: Remove some redundant in-memory section headers

[tip-bot for Andy Lutomirski]

Commit-ID:  0e3727a8839c988a3c56170bc8da76d55a16acad
Gitweb:     http://git.kernel.org/tip/0e3727a8839c988a3c56170bc8da76d55a16acad
Author:     Andy Lutomirski <luto@amacapital.net>
AuthorDate: Wed, 18 Jun 2014 15:59:49 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Thu, 19 Jun 2014 15:45:26 -0700

x86/vdso: Remove some redundant in-memory section headers

.data doesn't need to be separate from .rodata: they're both readonly.

.altinstructions and .altinstr_replacement aren't needed by anything
except vdso2c; strip them from the final image.

While we're at it, rather than aligning the actual executable text,
just shove some unused-at-runtime data in between real data and
text.

My vdso image is still above 4k, but I'm disinclined to try to
trim it harder for 3.16.  For future trimming, I suspect that these
sections could be moved to later in the file and dropped from
the in-memory image:

.gnu.version and .gnu.version_d   (this may lose versions in gdb)
.eh_frame                         (should be harmless)
.eh_frame_hdr                     (I'm not really sure)
.hash                             (AFAIK nothing needs this section header)

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/2e96d0c49016ea6d026a614ae645e93edd325961.1403129369.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/vdso/vdso-fakesections.c |  3 ---
 arch/x86/vdso/vdso-layout.lds.S   | 43 +++++++++++++++++++++------------------
 arch/x86/vdso/vdso2c.h            |  4 +++-
 3 files changed, 26 insertions(+), 24 deletions(-)

diff --git a/arch/x86/vdso/vdso-fakesections.c b/arch/x86/vdso/vdso-fakesections.c
index 56927a7..aa5fbfa 100644
--- a/arch/x86/vdso/vdso-fakesections.c
+++ b/arch/x86/vdso/vdso-fakesections.c
@@ -16,9 +16,6 @@ const char fake_shstrtab[] __attribute__((section(".fake_shstrtab"))) =
 	".rodata\0"
 	".fake_shstrtab\0"  /* Yay, self-referential code. */
 	".note\0"
-	".data\0"
-	".altinstructions\0"
-	".altinstr_replacement\0"
 	".eh_frame_hdr\0"
 	".eh_frame\0"
 	".text";
diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/vdso/vdso-layout.lds.S
index e4cbc21..9197544 100644
--- a/arch/x86/vdso/vdso-layout.lds.S
+++ b/arch/x86/vdso/vdso-layout.lds.S
@@ -14,7 +14,7 @@
 # error unknown VDSO target
 #endif
 
-#define NUM_FAKE_SHDRS 16
+#define NUM_FAKE_SHDRS 13
 
 SECTIONS
 {
@@ -28,15 +28,17 @@ SECTIONS
 	.gnu.version_d	: { *(.gnu.version_d) }
 	.gnu.version_r	: { *(.gnu.version_r) }
 
-	.note		: { *(.note.*) }		:text	:note
-
-	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
-	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
-
 	.dynamic	: { *(.dynamic) }		:text	:dynamic
 
 	.rodata		: {
 		*(.rodata*)
+		*(.data*)
+		*(.sdata*)
+		*(.got.plt) *(.got)
+		*(.gnu.linkonce.d.*)
+		*(.bss*)
+		*(.dynbss*)
+		*(.gnu.linkonce.b.*)
 
 		/*
 		 * Ideally this would live in a C file, but that won't
@@ -50,28 +52,29 @@ SECTIONS
 
 	.fake_shstrtab	: { *(.fake_shstrtab) }		:text
 
-	.data		: {
-		*(.data*)
-		*(.sdata*)
-		*(.got.plt) *(.got)
-		*(.gnu.linkonce.d.*)
-		*(.bss*)
-		*(.dynbss*)
-		*(.gnu.linkonce.b.*)
-	}
 
-	.altinstructions	: { *(.altinstructions) }
-	.altinstr_replacement	: { *(.altinstr_replacement) }
+	.note		: { *(.note.*) }		:text	:note
+
+	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
+	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
+
 
 	/*
-	 * Align the actual code well away from the non-instruction data.
-	 * This is the best thing for the I-cache.
+	 * Text is well-separated from actual data: there's plenty of
+	 * stuff that isn't used at runtime in between.
 	 */
-	. = ALIGN(0x100);
 
 	.text		: { *(.text*) }			:text	=0x90909090,
 
 	/*
+	 * At the end so that eu-elflint stays happy when vdso2c strips
+	 * these.  A better implementation would avoid allocating space
+	 * for these.
+	 */
+	.altinstructions	: { *(.altinstructions) }	:text
+	.altinstr_replacement	: { *(.altinstr_replacement) }	:text
+
+	/*
 	 * The remainder of the vDSO consists of special pages that are
 	 * shared between the kernel and userspace.  It needs to be at the
 	 * end so that it doesn't overlap the mapping of the actual
diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index f01ed4b..f42e2dd 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -92,7 +92,9 @@ static void BITSFUNC(copy_section)(struct BITSFUNC(fake_sections) *out,
 {
 	uint64_t flags = GET_LE(&in->sh_flags);
 
-	bool copy = flags & SHF_ALLOC;
+	bool copy = flags & SHF_ALLOC &&
+		strcmp(name, ".altinstructions") &&
+		strcmp(name, ".altinstr_replacement");
 
 	if (!copy)
 		return;

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[Ingo Molnar]

[-- Attachment #1: Type: text/plain, Size: 1058 bytes --]


* tip-bot for Andy Lutomirski <tipbot@zytor.com> wrote:

> Commit-ID:  5f56e7167e6d438324fcba87018255d81e201383
> Gitweb:     http://git.kernel.org/tip/5f56e7167e6d438324fcba87018255d81e201383
> Author:     Andy Lutomirski <luto@amacapital.net>
> AuthorDate: Wed, 18 Jun 2014 15:59:46 -0700
> Committer:  H. Peter Anvin <hpa@linux.intel.com>
> CommitDate: Thu, 19 Jun 2014 15:44:51 -0700
> 
> x86/vdso: Discard the __bug_table section
> 
> It serves no purpose in user code.
> 
> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
> Link: http://lkml.kernel.org/r/2a5bebff42defd8a5e81d96f7dc00f21143c80e8.1403129369.git.luto@amacapital.net
> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
> ---
>  arch/x86/vdso/vdso-layout.lds.S | 1 +
>  1 file changed, 1 insertion(+)

One of the recent x86/urgent vdso commits causes this build failure:

 Error: too many copied sections (max = 13)
 make[2]: *** [arch/x86/vdso/vdso-image-64.c] Error 1
 make[1]: *** [arch/x86/vdso] Error 2
 make: *** [arch/x86] Error 2

with the attached config.

Thanks,

	Ingo

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 105576 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.16.0-rc2 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not set
CONFIG_NO_HZ_FULL_SYSIDLE=y
CONFIG_NO_HZ_FULL_SYSIDLE_SMALL=8
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
# CONFIG_TASK_IO_ACCOUNTING is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_RCU_USER_QS=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_RCU_FAST_NO_HZ is not set
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
# CONFIG_MEMCG_KMEM is not set
CONFIG_CGROUP_HUGETLB=y
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_CMDLINE_PARSER=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=m
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_GOLDFISH=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_KVMTOOL_TEST_ENABLE is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
# CONFIG_XEN_PVH is not set
# CONFIG_KVM_GUEST is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_BOUNCE is not set
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ACPI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
CONFIG_PCIEASPM_PERFORMANCE=y
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA is not set
# CONFIG_CARDBUS is not set

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_RAPIDIO=y
# CONFIG_RAPIDIO_TSI721 is not set
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
# CONFIG_RAPIDIO_DMA_ENGINE is not set
# CONFIG_RAPIDIO_DEBUG is not set
# CONFIG_RAPIDIO_ENUM_BASIC is not set

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
# CONFIG_RAPIDIO_TSI568 is not set
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_IOSF_MBI=m
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=m
CONFIG_UNIX_DIAG=m
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
CONFIG_ATM=m
CONFIG_ATM_LANE=m
CONFIG_STP=y
CONFIG_GARP=m
CONFIG_BRIDGE=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
# CONFIG_IPDDP is not set
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_PHONET=y
CONFIG_IEEE802154=m
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=m
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_PLUG=y

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
CONFIG_BATMAN_ADV_DEBUG=y
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=y
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
# CONFIG_CAN_BCM is not set
# CONFIG_CAN_GW is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_SLCAN is not set
# CONFIG_CAN_DEV is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
# CONFIG_KS959_DONGLE is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
# CONFIG_VIA_FIR is not set
CONFIG_MCS_FIR=m
CONFIG_BT=m
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
# CONFIG_BT_HCIUART_H4 is not set
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
CONFIG_BT_ATH3K=m
# CONFIG_BT_WILINK is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_REGULATOR is not set
CONFIG_RFKILL_GPIO=m
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
# CONFIG_CAIF_USB is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
CONFIG_NFC_NCI=m
# CONFIG_NFC_NCI_SPI is not set
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=m
# CONFIG_NFC_WILINK is not set
CONFIG_NFC_TRF7970A=m
CONFIG_NFC_SIM=m
# CONFIG_NFC_PORT100 is not set
CONFIG_NFC_MRVL=m
CONFIG_NFC_MRVL_USB=m
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_CMA is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=m
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
CONFIG_SM_FTL=m
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=m
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=m
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=m
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_BCH=m
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=m
CONFIG_MTD_NAND_DENALI=m
CONFIG_MTD_NAND_DENALI_PCI=m
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_DOCG4=m
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
CONFIG_MTD_SPI_NOR=m
# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
# CONFIG_BLK_DEV is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_CS5535_MFGPT=m
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=m
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_TI_DAC7512 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
CONFIG_USB_SWITCH_FSA9480=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
# CONFIG_EEPROM_93CX6 is not set
CONFIG_EEPROM_93XX46=m
CONFIG_CB710_CORE=m
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=m
CONFIG_SENSORS_LIS3_SPI=m
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=y
# CONFIG_INTEL_MEI_ME is not set
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=m

#
# Intel MIC Host Driver
#
CONFIG_INTEL_MIC_HOST=m

#
# Intel MIC Card Driver
#
CONFIG_INTEL_MIC_CARD=y
CONFIG_GENWQE=y
CONFIG_ECHO=y
CONFIG_HAVE_IDE=y
CONFIG_IDE=m

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8172=m
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_AHCI_PLATFORM=m
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_SX4=m
# CONFIG_ATA_BMDMA is not set

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=y
# CONFIG_TCM_PSCSI is not set
CONFIG_LOOPBACK_TARGET=y
# CONFIG_ISCSI_TARGET is not set
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
CONFIG_FIREWIRE_SBP2=m
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=m
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_DUMMY is not set
CONFIG_EQUALIZER=y
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_RIONET=m
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_LANAI=m
# CONFIG_ATM_ENI is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
CONFIG_ATM_HORIZON_DEBUG=y
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=m

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
CONFIG_CAIF_SPI_SLAVE=y
# CONFIG_CAIF_SPI_SYNC is not set
CONFIG_CAIF_HSI=m
# CONFIG_CAIF_VIRTIO is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_RING=m

#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_ETHERNET is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not set
# CONFIG_SKFP is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=m
CONFIG_AMD_PHY=m
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=m
CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=m
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_MICREL_KS8995MA=m
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=y
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=y
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
CONFIG_USB_NET_KALMIA=y
# CONFIG_USB_NET_QMI_WWAN is not set
CONFIG_USB_HSO=m
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_CDC_PHONET is not set
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
CONFIG_WLAN=y
CONFIG_PRISM54=y
# CONFIG_HOSTAP is not set
# CONFIG_WL_TI is not set

#
# WiMAX Wireless Broadband devices
#
# CONFIG_WIMAX_I2400M_USB is not set
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
# CONFIG_HDLC_PPP is not set
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
# CONFIG_DLCI is not set
# CONFIG_LAPBETHER is not set
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKEHARD=m
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
CONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set
# CONFIG_ISDN_X25 is not set

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y

#
# D-channel protocol features
#
# CONFIG_HISAX_EURO is not set
CONFIG_HISAX_1TR6=y
# CONFIG_HISAX_NI1 is not set
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
# CONFIG_HISAX_TELESPCI is not set
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
CONFIG_HISAX_ELSA=y
# CONFIG_HISAX_DIEHLDIVA is not set
# CONFIG_HISAX_SEDLBAUER is not set
CONFIG_HISAX_NETJET=y
# CONFIG_HISAX_NETJET_U is not set
CONFIG_HISAX_NICCY=y
# CONFIG_HISAX_BKM_A4T is not set
# CONFIG_HISAX_SCT_QUADRO is not set
CONFIG_HISAX_GAZEL=y
# CONFIG_HISAX_HFC_PCI is not set
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_ENTERNOW_PCI is not set
CONFIG_HISAX_DEBUG=y

#
# HiSax PCMCIA card service modules
#

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=y
CONFIG_HISAX_HFC4S8S=y
CONFIG_HISAX_FRITZ_PCIPNP=y

#
# Active cards
#
CONFIG_ISDN_CAPI=m
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
# CONFIG_ISDN_CAPI_CAPIDRV is not set

#
# CAPI hardware drivers
#
# CONFIG_CAPI_AVM is not set
# CONFIG_CAPI_EICON is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set
CONFIG_ISDN_HDLC=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=m
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=m
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=m
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AS5011=m
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_JOYSTICK_WALKERA0701=y
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
# CONFIG_INPUT_AD714X_SPI is not set
CONFIG_INPUT_ARIZONA_HAPTICS=m
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_MAX8925_ONKEY=m
# CONFIG_INPUT_MC13783_PWRBUTTON is not set
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_MPU3050=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
CONFIG_INPUT_GPIO_TILT_POLLED=y
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=y
# CONFIG_INPUT_RETU_PWRBUTTON is not set
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA9052_ONKEY=m
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_WM831X_ON is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_N_GSM=m
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=y
CONFIG_GOLDFISH_TTY=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DW=m

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MRST_MAX3110 is not set
CONFIG_SERIAL_MFD_HSU=m
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=m
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_ALTERA_JTAGUART=m
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_XEN is not set
CONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=m
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=m
CONFIG_R3964=y
# CONFIG_APPLICOM is not set
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_NSC=m
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_ST33_I2C=m
CONFIG_TCG_XEN=m
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=m
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=y
# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_GPIO=m
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_PXA2XX_PCI is not set
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_XCOMM=m
# CONFIG_SPI_XILINX is not set
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MMIO=m

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=m
CONFIG_SPMI=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
# CONFIG_HSI_CHAR is not set

#
# PPS support
#
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m
CONFIG_DP83640_PHY=m
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_F7188X=m
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_VX855=y

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_ARIZONA is not set
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TPS65912=y
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_ADP5520=m
CONFIG_GPIO_ADP5588=m

#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=m
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_AMD8111 is not set
CONFIG_GPIO_INTEL_MID=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y

#
# AC97 GPIO expanders:
#
# CONFIG_GPIO_UCB1400 is not set

#
# LPC GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y

#
# USB GPIO expanders:
#
CONFIG_GPIO_VIPERBOARD=m
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=m
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_MAX8925_POWER=m
CONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=m
# CONFIG_CHARGER_PCF50633 is not set
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=m
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_MAX8997=y
# CONFIG_CHARGER_MAX8998 is not set
# CONFIG_CHARGER_BQ2415X is not set
CONFIG_CHARGER_BQ24190=m
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
CONFIG_SENSORS_HIH6130=m
CONFIG_SENSORS_IIO_HWMON=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=m
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=m
CONFIG_SENSORS_HTU21=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1275 is not set
CONFIG_SENSORS_LM25066=m
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_WM831X is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_WM831X_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=m
CONFIG_DW_WATCHDOG=y
CONFIG_RETU_WATCHDOG=y
CONFIG_ACQUIRE_WDT=m
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=y
CONFIG_ALIM7101_WDT=y
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_GEODE_WDT=m
# CONFIG_SBC_FITPC2_WATCHDOG is not set
CONFIG_EUROTECH_WDT=y
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
# CONFIG_HPWDT_NMI_DECODING is not set
# CONFIG_SC1200_WDT is not set
CONFIG_PC87413_WDT=y
# CONFIG_NV_TCO is not set
CONFIG_60XX_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=m
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=m
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_MC13XXX=m
# CONFIG_MFD_MC13XXX_SPI is not set
CONFIG_MFD_MC13XXX_I2C=m
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_MFD_JANZ_CMODIO=m
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_UCB1400_CORE=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RTSX_PCI=m
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=m
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=m
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=m
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TIMBERDALE=m
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_ARIZONA_SPI=y
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM8607=m
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_AD5398=m
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_ARIZONA=m
CONFIG_REGULATOR_AXP20X=m
CONFIG_REGULATOR_DA9052=m
CONFIG_REGULATOR_DA9055=m
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9210=y
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LTC3589=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=m
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8907 is not set
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MC13XXX_CORE=m
CONFIG_REGULATOR_MC13783=m
CONFIG_REGULATOR_MC13892=m
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=m
# CONFIG_REGULATOR_S2MPA01 is not set
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=m
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=m
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65217=m
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS6586X=m
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_WM831X=m
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_RC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_DVB_CORE=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
# CONFIG_VIDEO_SH_VEU is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_SMS_SDIO_DRV is not set
CONFIG_MEDIA_PARPORT_SUPPORT=y
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=y
CONFIG_VIDEO_W9966=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_RADIO_SI4713=m
CONFIG_USB_SI4713=m
CONFIG_PLATFORM_SI4713=m
CONFIG_I2C_SI4713=m
CONFIG_RADIO_SI476X=m
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
CONFIG_USB_MA901=y
# CONFIG_RADIO_TEA5764 is not set
CONFIG_RADIO_SAA7706H=m
CONFIG_RADIO_TEF6862=m
CONFIG_RADIO_TIMBERDALE=m
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=m

#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_MEDIA_ATTACH=y

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
CONFIG_VIDEO_TDA7432=y
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
CONFIG_VIDEO_TEA6420=m
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_UDA1342=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_SONY_BTF_MPX=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_ML86V7667=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA7191=m
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=m
CONFIG_VIDEO_TW2804=m
CONFIG_VIDEO_TW9903=m
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
# CONFIG_VIDEO_CX25840 is not set

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
# CONFIG_VIDEO_SAA7185 is not set
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=m
CONFIG_VIDEO_AK881X=m
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
CONFIG_VIDEO_OV7640=m
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_VS6624=m
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_SR030PC30=y

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
CONFIG_VIDEO_AS3645A=m
CONFIG_VIDEO_LM3560=y
# CONFIG_VIDEO_LM3646 is not set

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
# CONFIG_VIDEO_UPD64083 is not set

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=m
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA8290 is not set
CONFIG_MEDIA_TUNER_TDA827X=y
# CONFIG_MEDIA_TUNER_TDA18271 is not set
CONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
CONFIG_MEDIA_TUNER_MT20XX=m
# CONFIG_MEDIA_TUNER_MT2060 is not set
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_XC4000 is not set
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_M88TS2022 is not set
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=y
# CONFIG_MEDIA_TUNER_IT913X is not set
CONFIG_MEDIA_TUNER_R820T=m

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_M88DS3103=y

#
# Multistandard (cable + terrestrial) frontends
#
# CONFIG_DVB_DRXK is not set
CONFIG_DVB_TDA18271C2DD=m

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
CONFIG_DVB_CX24123=m
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
CONFIG_DVB_STV0288=y
CONFIG_DVB_STB6000=m
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=m
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=m
# CONFIG_DVB_TUA6100 is not set
CONFIG_DVB_CX24116=m
# CONFIG_DVB_CX24117 is not set
# CONFIG_DVB_SI21XX is not set
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
# CONFIG_DVB_MB86A16 is not set
# CONFIG_DVB_TDA10071 is not set

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=y
CONFIG_DVB_L64781=y
CONFIG_DVB_TDA1004X=y
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=y
# CONFIG_DVB_TDA10048 is not set
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=y
CONFIG_DVB_HD29L2=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
# CONFIG_DVB_RTL2830 is not set
CONFIG_DVB_RTL2832=y
# CONFIG_DVB_SI2168 is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
# CONFIG_DVB_TDA10021 is not set
CONFIG_DVB_TDA10023=y
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
CONFIG_DVB_OR51211=y
CONFIG_DVB_OR51132=y
# CONFIG_DVB_BCM3510 is not set
CONFIG_DVB_LGDT330X=y
# CONFIG_DVB_LGDT3305 is not set
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=y
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=m
# CONFIG_DVB_S5H1411 is not set

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
# CONFIG_DVB_TUNER_DIB0070 is not set
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=y
# CONFIG_DVB_LNBP21 is not set
CONFIG_DVB_LNBP22=y
# CONFIG_DVB_ISL6405 is not set
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
# CONFIG_DVB_LGS8GXX is not set
CONFIG_DVB_ATBM8830=y
# CONFIG_DVB_TDA665x is not set
CONFIG_DVB_IX2505V=y
# CONFIG_DVB_M88RS2000 is not set
CONFIG_DVB_AF9033=m

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16

#
# Direct Rendering Manager
#
# CONFIG_DRM is not set

#
# Frame buffer Devices
#
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=m
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_S6E63M0 is not set
# CONFIG_LCD_LD9040 is not set
CONFIG_LCD_AMS369FG06=m
# CONFIG_LCD_LMS501KF03 is not set
CONFIG_LCD_HX8357=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_LM3533=m
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=m
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=m
CONFIG_BACKLIGHT_LM3639=m
# CONFIG_BACKLIGHT_OT200 is not set
# CONFIG_BACKLIGHT_TPS65217 is not set
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=m
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=y
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=y
# CONFIG_SND_ATIIXP_MODEM is not set
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=y
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=y
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
CONFIG_SND_GINA24=m
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=y
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
CONFIG_SND_ENS1370=y
# CONFIG_SND_ENS1371 is not set
CONFIG_SND_ES1938=m
# CONFIG_SND_ES1968 is not set
CONFIG_SND_FM801=y
# CONFIG_SND_FM801_TEA575X_BOOL is not set
CONFIG_SND_HDSP=y

#
# Don't forget to add built-in firmwares for HDSP driver
#
CONFIG_SND_HDSPM=m
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=y
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=m
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=y
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=m

#
# Set to Y if you want auto-loading the codec driver
#
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m

#
# Set to Y if you want auto-loading the codec driver
#
CONFIG_SND_HDA_CODEC_CIRRUS=y
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m

#
# Set to Y if you want auto-loading the codec driver
#
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_SPI=y
# CONFIG_SND_USB is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=m
# CONFIG_SND_ATMEL_SOC is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_SAI is not set
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
CONFIG_SND_SOC_FSL_UTILS=m
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# CONFIG_SND_SOC_INTEL_SST is not set
CONFIG_SND_SOC_I2C_AND_SPI=m

#
# CODEC drivers
#
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_AK4104=m
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
CONFIG_SND_SOC_ALC5623=m
# CONFIG_SND_SOC_CS42L52 is not set
CONFIG_SND_SOC_CS42L56=m
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4270=m
# CONFIG_SND_SOC_CS4271 is not set
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
CONFIG_SND_SOC_HDMI_CODEC=m
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1792A is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SI476X=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_STA350 is not set
CONFIG_SND_SOC_TAS5086=m
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
# CONFIG_SND_SOC_WM8737 is not set
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
CONFIG_SND_SOC_WM8804=m
# CONFIG_SND_SOC_WM8903 is not set
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_VMIDI is not set
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=y
CONFIG_SOUND_MPU401=y
CONFIG_SOUND_PAS=m
# CONFIG_SOUND_PSS is not set
CONFIG_SOUND_SB=y
CONFIG_SOUND_YM3812=y
CONFIG_SOUND_UART6850=y
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
# CONFIG_SC6600_JOY is not set
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_SOUND_KAHLUA=y
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=y
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CP2112=m
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELECOM is not set
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=y
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
CONFIG_HID_HUION=m
CONFIG_HID_KEYTOUCH=y
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=m
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
CONFIG_I2C_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
# CONFIG_USB_OTG_FSM is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=m
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_FUSBH200_HCD=m
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_MAX3421_HCD=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HCD_BCMA is not set
CONFIG_USB_HCD_TEST_MODE=y
# CONFIG_USB_RENESAS_USBHS is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=y
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_GADGET is not set
# CONFIG_USB_MUSB_DUAL_ROLE is not set
# CONFIG_USB_MUSB_TUSB6010 is not set
CONFIG_USB_MUSB_UX500=m
CONFIG_USB_UX500_DMA=y
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=m
# CONFIG_USB_DWC3_HOST is not set
CONFIG_USB_DWC3_GADGET=y
# CONFIG_USB_DWC3_DUAL_ROLE is not set

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=m

#
# Debugging features
#
CONFIG_USB_DWC3_DEBUG=y
# CONFIG_USB_DWC3_VERBOSE is not set
# CONFIG_USB_DWC2 is not set
CONFIG_USB_CHIPIDEA=y
# CONFIG_USB_CHIPIDEA_UDC is not set
# CONFIG_USB_CHIPIDEA_HOST is not set
# CONFIG_USB_CHIPIDEA_DEBUG is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not set
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=m
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_METRO=m
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=m
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_ZTE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=m
CONFIG_USB_EHSET_TEST_FIXTURE=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_UEAGLEATM is not set
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_SAMSUNG_USBPHY=y
CONFIG_SAMSUNG_USB2PHY=y
CONFIG_SAMSUNG_USB3PHY=y
CONFIG_USB_GPIO_VBUS=m
# CONFIG_TAHVO_USB is not set
CONFIG_USB_ISP1301=m
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
# CONFIG_USB_GADGET_VERBOSE is not set
CONFIG_USB_GADGET_DEBUG_FILES=y
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FOTG210_UDC is not set
CONFIG_USB_GR_UDC=m
CONFIG_USB_R8A66597=m
CONFIG_USB_PXA27X=y
# CONFIG_USB_MV_UDC is not set
CONFIG_USB_MV_U3D=y
# CONFIG_USB_M66592 is not set
CONFIG_USB_AMD5536UDC=y
# CONFIG_USB_NET2272 is not set
CONFIG_USB_NET2280=y
CONFIG_USB_GOKU=m
CONFIG_USB_EG20T=m
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_F_ACM=m
CONFIG_USB_F_SS_LB=m
CONFIG_USB_U_SERIAL=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_F_NCM=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_MASS_STORAGE=m
# CONFIG_USB_CONFIGFS is not set
CONFIG_USB_ZERO=m
CONFIG_USB_ZERO_HNPTEST=y
CONFIG_USB_AUDIO=m
CONFIG_GADGET_UAC1=y
# CONFIG_USB_ETH is not set
CONFIG_USB_G_NCM=m
CONFIG_USB_GADGETFS=m
# CONFIG_USB_FUNCTIONFS is not set
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_GADGET_TARGET=m
# CONFIG_USB_G_SERIAL is not set
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
# CONFIG_USB_G_NOKIA is not set
CONFIG_USB_G_ACM_MS=m
CONFIG_USB_G_MULTI=m
# CONFIG_USB_G_MULTI_RNDIS is not set
CONFIG_USB_G_MULTI_CDC=y
CONFIG_USB_G_HID=m
# CONFIG_USB_G_DBGP is not set
CONFIG_USB_G_WEBCAM=m
# CONFIG_UWB is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_MMC_BLOCK is not set
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_GOLDFISH=y
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_PCI=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3533 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_DA9052=m
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_REGULATOR=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_MAX8997=m
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_MAX8907 is not set
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=m
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_ISL12057=m
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=m
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=m
CONFIG_RTC_DRV_S35390A=m
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=y
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
CONFIG_RTC_DRV_S5M=m

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
CONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_DS3234=y
CONFIG_RTC_DRV_PCF2123=y
# CONFIG_RTC_DRV_RX4581 is not set
CONFIG_RTC_DRV_MCP795=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DA9052 is not set
# CONFIG_RTC_DRV_DA9055 is not set
CONFIG_RTC_DRV_DA9063=y
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_WM831X=m
CONFIG_RTC_DRV_PCF50633=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_MC13XXX=m
CONFIG_RTC_DRV_MOXART=m
CONFIG_RTC_DRV_XGENE=m

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=m
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
CONFIG_INTEL_IOATDMA=y
# CONFIG_DW_DMAC_CORE is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_TIMB_DMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_SCRUB_PAGES is not set
# CONFIG_XEN_DEV_EVTCHN is not set
CONFIG_XENFS=m
# CONFIG_XEN_COMPAT_XENFS is not set
# CONFIG_XEN_SYS_HYPERVISOR is not set
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_HAVE_PVMMU=y
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
# CONFIG_GOLDFISH_PIPE is not set
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=m
# CONFIG_CHROMEOS_PSTORE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y

#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=m

#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_ADC_JACK=m
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_ARIZONA=m
# CONFIG_MEMORY is not set
CONFIG_IIO=m
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2

#
# Accelerometers
#
CONFIG_BMA180=m
CONFIG_HID_SENSOR_ACCEL_3D=m
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
CONFIG_KXSD9=m
# CONFIG_MMA8452 is not set

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=m
# CONFIG_AD7266 is not set
CONFIG_AD7298=m
CONFIG_AD7476=m
CONFIG_AD7791=m
CONFIG_AD7793=m
CONFIG_AD7887=m
# CONFIG_AD7923 is not set
CONFIG_AD799X=m
CONFIG_MAX1363=m
CONFIG_MCP320X=m
# CONFIG_MCP3422 is not set
CONFIG_NAU7802=m
# CONFIG_TI_ADC081C is not set
CONFIG_TI_AM335X_ADC=m
# CONFIG_VIPERBOARD_ADC is not set

#
# Amplifiers
#
CONFIG_AD8366=m

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
CONFIG_IIO_ST_SENSORS_I2C=m
CONFIG_IIO_ST_SENSORS_SPI=m
CONFIG_IIO_ST_SENSORS_CORE=m

#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5360=m
CONFIG_AD5380=m
CONFIG_AD5421=m
CONFIG_AD5446=m
CONFIG_AD5449=m
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
CONFIG_AD5686=m
# CONFIG_AD5755 is not set
CONFIG_AD5764=m
# CONFIG_AD5791 is not set
CONFIG_AD7303=m
CONFIG_MAX517=m
CONFIG_MCP4725=m

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
CONFIG_ADIS16136=m
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_IIO_ST_GYRO_3AXIS=m
CONFIG_IIO_ST_GYRO_I2C_3AXIS=m
CONFIG_IIO_ST_GYRO_SPI_3AXIS=m
# CONFIG_ITG3200 is not set

#
# Humidity sensors
#
# CONFIG_DHT11 is not set
CONFIG_SI7005=m

#
# Inertial measurement units
#
CONFIG_ADIS16400=m
# CONFIG_ADIS16480 is not set
# CONFIG_INV_MPU6050_IIO is not set
CONFIG_IIO_ADIS_LIB=m
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_APDS9300=m
CONFIG_CM32181=m
CONFIG_CM36651=m
# CONFIG_GP2AP020A00F is not set
# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_HID_SENSOR_PROX is not set
# CONFIG_SENSORS_LM3533 is not set
# CONFIG_LTR501 is not set
CONFIG_TCS3472=m
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL4531 is not set
# CONFIG_VCNL4000 is not set

#
# Magnetometer sensors
#
CONFIG_AK8975=m
# CONFIG_MAG3110 is not set
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m

#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=m

#
# Pressure sensors
#
CONFIG_HID_SENSOR_PRESS=m
# CONFIG_MPL115 is not set
CONFIG_MPL3115=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_IIO_ST_PRESS_SPI=m

#
# Lightning sensors
#
CONFIG_AS3935=m

#
# Temperature sensors
#
# CONFIG_MLX90614 is not set
CONFIG_TMP006=m
# CONFIG_NTB is not set
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
# CONFIG_VME_CA91CX42 is not set
# CONFIG_VME_TSI148 is not set

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=m

#
# VME Device Drivers
#
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=m
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_GOOGLE_FIRMWARE=y

#
# Google Firmware Drivers
#
CONFIG_GOOGLE_MEMCONSOLE=m

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_XFS_WARN=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_FS_O2CB is not set
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
CONFIG_OCFS2_DEBUG_FS=y
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_HFSPLUS_FS_POSIX_ACL=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
# CONFIG_JFFS2_FS_SECURITY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=y
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
# CONFIG_F2FS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
# CONFIG_NCPFS_NLS is not set
CONFIG_NCPFS_EXTRAS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=m
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=m
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
# CONFIG_NLS_MAC_CROATIAN is not set
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
CONFIG_DEBUG_KMEMLEAK_TEST=m
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM_RB=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
CONFIG_RCU_TRACE=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_NOTIFIER_ERROR_INJECTION=m
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_PROFILE_ALL_BRANCHES=y
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_KPROBE_EVENT is not set
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_RING_BUFFER_STARTUP_TEST=y

#
# Runtime Testing
#
# CONFIG_LKDTM is not set
CONFIG_TEST_LIST_SORT=y
# CONFIG_KPROBES_SANITY_TEST is not set
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_TEST_MODULE=m
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_DEBUG_BOOT_PARAMS is not set
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_RMD128=m
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_LZ4=m
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
CONFIG_KVM_MMU_AUDIT=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_FONT_SUPPORT=m
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[Andy Lutomirski]

On Sun, Jun 22, 2014 at 1:47 AM, Ingo Molnar <mingo@kernel.org> wrote:
>
> * tip-bot for Andy Lutomirski <tipbot@zytor.com> wrote:
>
>> Commit-ID:  5f56e7167e6d438324fcba87018255d81e201383
>> Gitweb:     http://git.kernel.org/tip/5f56e7167e6d438324fcba87018255d81e201383
>> Author:     Andy Lutomirski <luto@amacapital.net>
>> AuthorDate: Wed, 18 Jun 2014 15:59:46 -0700
>> Committer:  H. Peter Anvin <hpa@linux.intel.com>
>> CommitDate: Thu, 19 Jun 2014 15:44:51 -0700
>>
>> x86/vdso: Discard the __bug_table section
>>
>> It serves no purpose in user code.
>>
>> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
>> Link: http://lkml.kernel.org/r/2a5bebff42defd8a5e81d96f7dc00f21143c80e8.1403129369.git.luto@amacapital.net
>> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
>> ---
>>  arch/x86/vdso/vdso-layout.lds.S | 1 +
>>  1 file changed, 1 insertion(+)
>
> One of the recent x86/urgent vdso commits causes this build failure:
>
>  Error: too many copied sections (max = 13)

I can't reproduce this with your config, which suggestes a binutils
issue, which is annoying.  Can you tell me what version of ld you're
using and send me the output of:

for i in arch/x86/vdso/*.so.dbg; do echo $i; eu-readelf -S $i; done

To summarize, the issue is that, in 3.16, the vvar area is accessed in
a PC-relative manner from the vdso code.  So we have:

vdso page 1 | vdso page 2 | vvar page 1 | vvar page 2  (where the
number of vdso pages can vary)

The difficulty comes from the fact that a decent amount of userspace
code wants the vdso to have some section headers, and linkers don't
stick section headers into allocatable sections, since section headers
were never intended to be memory mapped.  So there's a risk that the
section headers dangle off the last loadable page in the vdso, at
which point they overlap the vvar area.  I've seen this happen.

The "solution" in tip is to move the section headers into a real
allocatable area reserved for that purpose.  The error you're seeing
is that I didn't allocate enough space for all the allocatable section
headers.

This crap almost makes me want to go back to something closer to
Stefani's implementation of sticking vvar before the vdso so we can
safely leave non-allocatable crap dangling off the end of the vdso.  I
don't really want to play section header whack-a-mole.  We could also
just give up on space efficiency and allocate space for several extra
section headers (and their associated names!).

--Andy

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[Andy Lutomirski]

On Sun, Jun 22, 2014 at 9:59 AM, Andy Lutomirski <luto@amacapital.net> wrote:
> On Sun, Jun 22, 2014 at 1:47 AM, Ingo Molnar <mingo@kernel.org> wrote:
>>
>> * tip-bot for Andy Lutomirski <tipbot@zytor.com> wrote:
>>
>>> Commit-ID:  5f56e7167e6d438324fcba87018255d81e201383
>>> Gitweb:     http://git.kernel.org/tip/5f56e7167e6d438324fcba87018255d81e201383
>>> Author:     Andy Lutomirski <luto@amacapital.net>
>>> AuthorDate: Wed, 18 Jun 2014 15:59:46 -0700
>>> Committer:  H. Peter Anvin <hpa@linux.intel.com>
>>> CommitDate: Thu, 19 Jun 2014 15:44:51 -0700
>>>
>>> x86/vdso: Discard the __bug_table section
>>>
>>> It serves no purpose in user code.
>>>
>>> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
>>> Link: http://lkml.kernel.org/r/2a5bebff42defd8a5e81d96f7dc00f21143c80e8.1403129369.git.luto@amacapital.net
>>> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
>>> ---
>>>  arch/x86/vdso/vdso-layout.lds.S | 1 +
>>>  1 file changed, 1 insertion(+)
>>
>> One of the recent x86/urgent vdso commits causes this build failure:
>>
>>  Error: too many copied sections (max = 13)
>
> I can't reproduce this with your config, which suggestes a binutils
> issue, which is annoying.  Can you tell me what version of ld you're
> using and send me the output of:
>
> for i in arch/x86/vdso/*.so.dbg; do echo $i; eu-readelf -S $i; done

Ping!

The current state of this is obviously not so good, but I don't know
how to proceed.

--Andy

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[H. Peter Anvin]

On 06/24/2014 11:19 AM, Andy Lutomirski wrote:
>>>
>>> One of the recent x86/urgent vdso commits causes this build failure:
>>>
>>>  Error: too many copied sections (max = 13)
>>
>> I can't reproduce this with your config, which suggestes a binutils
>> issue, which is annoying.  Can you tell me what version of ld you're
>> using and send me the output of:
>>
>> for i in arch/x86/vdso/*.so.dbg; do echo $i; eu-readelf -S $i; done
> 
> Ping!
> 
> The current state of this is obviously not so good, but I don't know
> how to proceed.
> 

We used to have this kind of problems with PHDRs, where ld would guess
how much space it would need, somehow guess wrong, and fall on its face.

I think we want to actually print the number that we are trying to copy
in addition to the maximum, and I also noticed the test looks wrong.
Thus I would like to propose the following patch as a diagnostic:

diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index f42e2ddc663d..94158e100f26 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -99,8 +99,9 @@ static void BITSFUNC(copy_section)(struct
BITSFUNC(fake_sections) *out,
        if (!copy)
                return;

-       if (out->count >= out->max_count)
-               fail("too many copied sections (max = %d)\n",
out->max_count);
+       if (out->count > out->max_count)
+               fail("too many copied sections (max = %d, need = %d)\n",
+                    out->max_count, out->count);

        if (in_idx == out->in_shstrndx)
                out->out_shstrndx = out->count;

Does anyone have any objection?  Andy, I presume I am correct that =>
should be > there?

	-hpa

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[H. Peter Anvin]

[-- Attachment #1: Type: text/plain, Size: 1190 bytes --]

On 06/22/2014 01:47 AM, Ingo Molnar wrote:
> 
> * tip-bot for Andy Lutomirski <tipbot@zytor.com> wrote:
> 
>> Commit-ID:  5f56e7167e6d438324fcba87018255d81e201383
>> Gitweb:     http://git.kernel.org/tip/5f56e7167e6d438324fcba87018255d81e201383
>> Author:     Andy Lutomirski <luto@amacapital.net>
>> AuthorDate: Wed, 18 Jun 2014 15:59:46 -0700
>> Committer:  H. Peter Anvin <hpa@linux.intel.com>
>> CommitDate: Thu, 19 Jun 2014 15:44:51 -0700
>>
>> x86/vdso: Discard the __bug_table section
>>
>> It serves no purpose in user code.
>>
>> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
>> Link: http://lkml.kernel.org/r/2a5bebff42defd8a5e81d96f7dc00f21143c80e8.1403129369.git.luto@amacapital.net
>> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
>> ---
>>  arch/x86/vdso/vdso-layout.lds.S | 1 +
>>  1 file changed, 1 insertion(+)
> 
> One of the recent x86/urgent vdso commits causes this build failure:
> 
>  Error: too many copied sections (max = 13)
>  make[2]: *** [arch/x86/vdso/vdso-image-64.c] Error 1
>  make[1]: *** [arch/x86/vdso] Error 2
>  make: *** [arch/x86] Error 2
> 
> with the attached config.
> 

Hi Ingo,

Could you try this with the attached patch?

	-hpa



[-- Attachment #2: 0001-x86-vdso-Make-vdso2c-print-the-number-of-sections-ne.patch --]
[-- Type: text/x-patch, Size: 1310 bytes --]

>From e28dc3efe8a8880206e90886cc12649f87fa1848 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, 24 Jun 2014 11:26:18 -0700
Subject: [PATCH] x86/vdso: Make vdso2c print the number of sections needed on
 error

If we run out of space for section, at least make the error message
print the amount of space we need so we can actually diagnose it.
Furthermore, the test should be > instead of >= (it is okay to have
exactly the maximum number of sections.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/20140622084754.GA15094@gmail.com
---
 arch/x86/vdso/vdso2c.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index f42e2ddc663d..94158e100f26 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -99,8 +99,9 @@ static void BITSFUNC(copy_section)(struct BITSFUNC(fake_sections) *out,
 	if (!copy)
 		return;
 
-	if (out->count >= out->max_count)
-		fail("too many copied sections (max = %d)\n", out->max_count);
+	if (out->count > out->max_count)
+		fail("too many copied sections (max = %d, need = %d)\n",
+		     out->max_count, out->count);
 
 	if (in_idx == out->in_shstrndx)
 		out->out_shstrndx = out->count;
-- 
1.9.3

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[Andy Lutomirski]

On Tue, Jun 24, 2014 at 11:26 AM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 06/24/2014 11:19 AM, Andy Lutomirski wrote:
>>>>
>>>> One of the recent x86/urgent vdso commits causes this build failure:
>>>>
>>>>  Error: too many copied sections (max = 13)
>>>
>>> I can't reproduce this with your config, which suggestes a binutils
>>> issue, which is annoying.  Can you tell me what version of ld you're
>>> using and send me the output of:
>>>
>>> for i in arch/x86/vdso/*.so.dbg; do echo $i; eu-readelf -S $i; done
>>
>> Ping!
>>
>> The current state of this is obviously not so good, but I don't know
>> how to proceed.
>>
>
> We used to have this kind of problems with PHDRs, where ld would guess
> how much space it would need, somehow guess wrong, and fall on its face.
>
> I think we want to actually print the number that we are trying to copy
> in addition to the maximum, and I also noticed the test looks wrong.
> Thus I would like to propose the following patch as a diagnostic:
>
> diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
> index f42e2ddc663d..94158e100f26 100644
> --- a/arch/x86/vdso/vdso2c.h
> +++ b/arch/x86/vdso/vdso2c.h
> @@ -99,8 +99,9 @@ static void BITSFUNC(copy_section)(struct
> BITSFUNC(fake_sections) *out,
>         if (!copy)
>                 return;
>
> -       if (out->count >= out->max_count)
> -               fail("too many copied sections (max = %d)\n",
> out->max_count);
> +       if (out->count > out->max_count)
> +               fail("too many copied sections (max = %d, need = %d)\n",
> +                    out->max_count, out->count);
>

I think the old test was correct: we haven't incremented count yet
(it's a couple lines below), so count is the zero-based index to which
we're writing.

I thought of doing the need = %d thing, but I think that the output is
a foregone conclusion: count == max_count + 1 when this fails.  A list
of all the section names would be more interesting, but eu-readelf -S
will tell is that.

--Andy

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[H. Peter Anvin]

[-- Attachment #1: Type: text/plain, Size: 1158 bytes --]

On 06/24/2014 11:37 AM, Andy Lutomirski wrote:
>>
>> diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
>> index f42e2ddc663d..94158e100f26 100644
>> --- a/arch/x86/vdso/vdso2c.h
>> +++ b/arch/x86/vdso/vdso2c.h
>> @@ -99,8 +99,9 @@ static void BITSFUNC(copy_section)(struct
>> BITSFUNC(fake_sections) *out,
>>         if (!copy)
>>                 return;
>>
>> -       if (out->count >= out->max_count)
>> -               fail("too many copied sections (max = %d)\n",
>> out->max_count);
>> +       if (out->count > out->max_count)
>> +               fail("too many copied sections (max = %d, need = %d)\n",
>> +                    out->max_count, out->count);
>>
> 
> I think the old test was correct: we haven't incremented count yet
> (it's a couple lines below), so count is the zero-based index to which
> we're writing.
> 
> I thought of doing the need = %d thing, but I think that the output is
> a foregone conclusion: count == max_count + 1 when this fails.  A list
> of all the section names would be more interesting, but eu-readelf -S
> will tell is that.
> 

Well, I have reproduced this failure.  eu-readelf output included.

	-hpa


[-- Attachment #2: err --]
[-- Type: text/plain, Size: 9972 bytes --]

o.test/arch/x86/vdso/vdso32-int80.so.dbg
There are 27 section headers, starting at offset 0x9774:

Section Headers:
[Nr] Name                 Type         Addr     Off    Size   ES Flags Lk Inf Al
[ 0]                      NULL         00000000 000000 000000  0        0   0  0
[ 1] .hash                HASH         000000b4 0000b4 000038  4 A      2   0  4
[ 2] .dynsym              DYNSYM       000000ec 0000ec 000090 16 A      3   1  4
[ 3] .dynstr              STRTAB       0000017c 00017c 000095  0 A      0   0  1
[ 4] .gnu.version         GNU_versym   00000212 000212 000012  2 A      2   0  2
[ 5] .gnu.version_d       GNU_verdef   00000224 000224 000054  0 A      3   3  4
[ 6] .dynamic             DYNAMIC      00000278 000278 000080  8 WA     3   0  4
[ 7] .rodata              PROGBITS     000002f8 0002f8 000228  4 WA     0   0  4
[ 8] .fake_shstrtab       PROGBITS     00000520 000520 000076  0 A      0   0 32
[ 9] .note                NOTE         00000598 000598 000060  0 A      0   0  4
[10] .eh_frame_hdr        PROGBITS     000005f8 0005f8 000024  0 A      0   0  4
[11] .eh_frame            PROGBITS     0000061c 00061c 0000f4  0 A      0   0  4
[12] .text                PROGBITS     00000710 000710 000633  0 AX     0   0 16
[13] .altinstructions     PROGBITS     00000d43 000d43 000018  0 A      0   0  1
[14] .altinstr_replacement PROGBITS     00000d5b 000d5b 000006  0 AX     0   0  1
[15] .debug_info          PROGBITS     00000000 000d61 004a84  0        0   0  1
[16] .debug_abbrev        PROGBITS     00000000 0057e5 000519  0        0   0  1
[17] .debug_loc           PROGBITS     00000000 005cfe 00064f  0        0   0  1
[18] .debug_aranges       PROGBITS     00000000 006350 000058  0        0   0  8
[19] .debug_ranges        PROGBITS     00000000 0063a8 000208  0        0   0  1
[20] .debug_line          PROGBITS     00000000 0065b0 00077b  0        0   0  1
[21] .debug_str           PROGBITS     00000000 006d2b 0027f2  1 MS     0   0  1
[22] .comment             PROGBITS     00000000 00951d 00002c  1 MS     0   0  1
[23] .debug_frame         PROGBITS     00000000 00954c 000100  0        0   0  4
[24] .shstrtab            STRTAB       00000000 00964c 000127  0        0   0  1
[25] .symtab              SYMTAB       00000000 009bac 000380 16       26  48  4
[26] .strtab              STRTAB       00000000 009f2c 000226  0        0   0  1

o.test/arch/x86/vdso/vdso32-syscall.so.dbg
There are 27 section headers, starting at offset 0x979c:

Section Headers:
[Nr] Name                 Type         Addr     Off    Size   ES Flags Lk Inf Al
[ 0]                      NULL         00000000 000000 000000  0        0   0  0
[ 1] .hash                HASH         000000b4 0000b4 000038  4 A      2   0  4
[ 2] .dynsym              DYNSYM       000000ec 0000ec 000090 16 A      3   1  4
[ 3] .dynstr              STRTAB       0000017c 00017c 000095  0 A      0   0  1
[ 4] .gnu.version         GNU_versym   00000212 000212 000012  2 A      2   0  2
[ 5] .gnu.version_d       GNU_verdef   00000224 000224 000054  0 A      3   3  4
[ 6] .dynamic             DYNAMIC      00000278 000278 000080  8 WA     3   0  4
[ 7] .rodata              PROGBITS     000002f8 0002f8 000220  4 WA     0   0  4
[ 8] .fake_shstrtab       PROGBITS     00000520 000520 000076  0 A      0   0 32
[ 9] .note                NOTE         00000598 000598 000060  0 A      0   0  4
[10] .eh_frame_hdr        PROGBITS     000005f8 0005f8 000024  0 A      0   0  4
[11] .eh_frame            PROGBITS     0000061c 00061c 0000fc  0 A      0   0  4
[12] .text                PROGBITS     00000720 000720 000640  0 AX     0   0 16
[13] .altinstructions     PROGBITS     00000d60 000d60 000018  0 A      0   0  1
[14] .altinstr_replacement PROGBITS     00000d78 000d78 000006  0 AX     0   0  1
[15] .debug_info          PROGBITS     00000000 000d7e 004a84  0        0   0  1
[16] .debug_abbrev        PROGBITS     00000000 005802 000519  0        0   0  1
[17] .debug_loc           PROGBITS     00000000 005d1b 00064f  0        0   0  1
[18] .debug_aranges       PROGBITS     00000000 006370 000058  0        0   0  8
[19] .debug_ranges        PROGBITS     00000000 0063c8 000208  0        0   0  1
[20] .debug_line          PROGBITS     00000000 0065d0 000783  0        0   0  1
[21] .debug_str           PROGBITS     00000000 006d53 0027f2  1 MS     0   0  1
[22] .comment             PROGBITS     00000000 009545 00002c  1 MS     0   0  1
[23] .debug_frame         PROGBITS     00000000 009574 000100  0        0   0  4
[24] .shstrtab            STRTAB       00000000 009674 000127  0        0   0  1
[25] .symtab              SYMTAB       00000000 009bd4 000380 16       26  48  4
[26] .strtab              STRTAB       00000000 009f54 000228  0        0   0  1

o.test/arch/x86/vdso/vdso32-sysenter.so.dbg
There are 27 section headers, starting at offset 0x97ac:

Section Headers:
[Nr] Name                 Type         Addr     Off    Size   ES Flags Lk Inf Al
[ 0]                      NULL         00000000 000000 000000  0        0   0  0
[ 1] .hash                HASH         000000b4 0000b4 000038  4 A      2   0  4
[ 2] .dynsym              DYNSYM       000000ec 0000ec 000090 16 A      3   1  4
[ 3] .dynstr              STRTAB       0000017c 00017c 000095  0 A      0   0  1
[ 4] .gnu.version         GNU_versym   00000212 000212 000012  2 A      2   0  2
[ 5] .gnu.version_d       GNU_verdef   00000224 000224 000054  0 A      3   3  4
[ 6] .dynamic             DYNAMIC      00000278 000278 000080  8 WA     3   0  4
[ 7] .rodata              PROGBITS     000002f8 0002f8 000214  4 WA     0   0  4
[ 8] .fake_shstrtab       PROGBITS     00000520 000520 000076  0 A      0   0 32
[ 9] .note                NOTE         00000598 000598 000060  0 A      0   0  4
[10] .eh_frame_hdr        PROGBITS     000005f8 0005f8 000024  0 A      0   0  4
[11] .eh_frame            PROGBITS     0000061c 00061c 000108  0 A      0   0  4
[12] .text                PROGBITS     00000730 000730 000644  0 AX     0   0 16
[13] .altinstructions     PROGBITS     00000d74 000d74 000018  0 A      0   0  1
[14] .altinstr_replacement PROGBITS     00000d8c 000d8c 000006  0 AX     0   0  1
[15] .debug_info          PROGBITS     00000000 000d92 004a84  0        0   0  1
[16] .debug_abbrev        PROGBITS     00000000 005816 000519  0        0   0  1
[17] .debug_loc           PROGBITS     00000000 005d2f 00064f  0        0   0  1
[18] .debug_aranges       PROGBITS     00000000 006380 000058  0        0   0  8
[19] .debug_ranges        PROGBITS     00000000 0063d8 000208  0        0   0  1
[20] .debug_line          PROGBITS     00000000 0065e0 000784  0        0   0  1
[21] .debug_str           PROGBITS     00000000 006d64 0027f2  1 MS     0   0  1
[22] .comment             PROGBITS     00000000 009556 00002c  1 MS     0   0  1
[23] .debug_frame         PROGBITS     00000000 009584 000100  0        0   0  4
[24] .shstrtab            STRTAB       00000000 009684 000127  0        0   0  1
[25] .symtab              SYMTAB       00000000 009be4 000390 16       26  49  4
[26] .strtab              STRTAB       00000000 009f74 000240  0        0   0  1

o.test/arch/x86/vdso/vdso64.so.dbg
There are 28 section headers, starting at offset 0xfb38:

Section Headers:
[Nr] Name                 Type         Addr             Off      Size     ES Flags Lk Inf Al
[ 0]                      NULL         0000000000000000 00000000 00000000  0        0   0  0
[ 1] .hash                HASH         0000000000000120 00000120 00000040  4 A      2   0  8
[ 2] .dynsym              DYNSYM       0000000000000160 00000160 00000108 24 A      3   2  8
[ 3] .dynstr              STRTAB       0000000000000268 00000268 0000005e  0 A      0   0  1
[ 4] .gnu.version         GNU_versym   00000000000002c6 000002c6 00000016  2 A      2   0  2
[ 5] .gnu.version_d       GNU_verdef   00000000000002e0 000002e0 00000038  0 A      3   2  8
[ 6] .dynamic             DYNAMIC      0000000000000318 00000318 00000130 16 WA     3   0  8
[ 7] .rodata              PROGBITS     0000000000000448 00000448 0000039c  8 WA     0   0  8
[ 8] _ftrace_branch       PROGBITS     00000000000007e4 000007e4 00000078  0 WA     0   0  4
[ 9] .fake_shstrtab       PROGBITS     0000000000000860 00000860 00000076  0 A      0   0 32
[10] .note                NOTE         00000000000008d8 000008d8 0000003c  0 A      0   0  4
[11] .eh_frame_hdr        PROGBITS     0000000000000914 00000914 0000002c  0 A      0   0  4
[12] .eh_frame            PROGBITS     0000000000000940 00000940 000000e8  0 A      0   0  8
[13] .text                PROGBITS     0000000000000a30 00000a30 000008bc  0 AX     0   0 16
[14] .altinstructions     PROGBITS     00000000000012ec 000012ec 000000d8  0 A      0   0  1
[15] .altinstr_replacement PROGBITS     00000000000013c4 000013c4 00000036  0 AX     0   0  1
[16] .rela.dyn            RELA         0000000000001400 00001400 00000090 24 A      2   0  8
[17] .debug_info          PROGBITS     0000000000000000 00001490 0000719f  0        0   0  1
[18] .debug_abbrev        PROGBITS     0000000000000000 0000862f 0000083c  0        0   0  1
[19] .debug_loc           PROGBITS     0000000000000000 00008e6b 0000296c  0        0   0  1
[20] .debug_aranges       PROGBITS     0000000000000000 0000b7d7 00000080  0        0   0  1
[21] .debug_ranges        PROGBITS     0000000000000000 0000b857 00000bb0  0        0   0  1
[22] .debug_line          PROGBITS     0000000000000000 0000c407 00000afd  0        0   0  1
[23] .debug_str           PROGBITS     0000000000000000 0000cf04 00002ad2  1 MS     0   0  1
[24] .comment             PROGBITS     0000000000000000 0000f9d6 0000002c  1 MS     0   0  1
[25] .shstrtab            STRTAB       0000000000000000 0000fa02 00000133  0        0   0  1
[26] .symtab              SYMTAB       0000000000000000 00010238 000004f8 24       27  44  8
[27] .strtab              STRTAB       0000000000000000 00010730 0000018f  0        0   0  1

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[H. Peter Anvin]

On 06/24/2014 11:29 AM, H. Peter Anvin wrote:
> 
> Hi Ingo,
> 
> Could you try this with the attached patch?
> 

Nevermind, not useful...

	-hpa

Re: [tip:x86/urgent] x86/vdso: Discard the __bug_table section

[Andy Lutomirski]

On Tue, Jun 24, 2014 at 11:43 AM, H. Peter Anvin <hpa@zytor.com> wrote:
> On 06/24/2014 11:37 AM, Andy Lutomirski wrote:
>>>
>>> diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
>>> index f42e2ddc663d..94158e100f26 100644
>>> --- a/arch/x86/vdso/vdso2c.h
>>> +++ b/arch/x86/vdso/vdso2c.h
>>> @@ -99,8 +99,9 @@ static void BITSFUNC(copy_section)(struct
>>> BITSFUNC(fake_sections) *out,
>>>         if (!copy)
>>>                 return;
>>>
>>> -       if (out->count >= out->max_count)
>>> -               fail("too many copied sections (max = %d)\n",
>>> out->max_count);
>>> +       if (out->count > out->max_count)
>>> +               fail("too many copied sections (max = %d, need = %d)\n",
>>> +                    out->max_count, out->count);
>>>
>>
>> I think the old test was correct: we haven't incremented count yet
>> (it's a couple lines below), so count is the zero-based index to which
>> we're writing.
>>
>> I thought of doing the need = %d thing, but I think that the output is
>> a foregone conclusion: count == max_count + 1 when this fails.  A list
>> of all the section names would be more interesting, but eu-readelf -S
>> will tell is that.
>>
>
> Well, I have reproduced this failure.  eu-readelf output included.

It's branch profiling.  Patches coming.

>
>         -hpa
>



-- 
Andy Lutomirski
AMA Capital Management, LLC

[PATCH 0/2] x86: Build fixes for tip/x86/urgent

[Andy Lutomirski]

For reasons that I don't quite understand, the current code to
disable branch profiling in the vdso wasn't working right.  Redo it
better.

Patch 2 is a sanity check: if that error happens, then something
is wrong with the vdso.

Andy Lutomirski (2):
  x86,vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile
  x86,vdso2c: Error out if DT_RELA is present

 arch/x86/vdso/Makefile         | 4 +++-
 arch/x86/vdso/vclock_gettime.c | 3 ---
 arch/x86/vdso/vdso2c.h         | 2 +-
 3 files changed, 4 insertions(+), 5 deletions(-)

-- 
1.9.3

[PATCH 1/2] x86,vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile

[Andy Lutomirski]

It should really apply to everything in the vdso, and putting it in
the C files seems unreliable.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/Makefile         | 4 +++-
 arch/x86/vdso/vclock_gettime.c | 3 ---
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 68a15c4..61b04fe 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -66,7 +66,8 @@ $(obj)/vdso-image-%.c: $(obj)/vdso%.so.dbg $(obj)/vdso2c FORCE
 #
 CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \
        $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) \
-       -fno-omit-frame-pointer -foptimize-sibling-calls
+       -fno-omit-frame-pointer -foptimize-sibling-calls \
+       -DDISABLE_BRANCH_PROFILING
 
 $(vobjs): KBUILD_CFLAGS += $(CFL)
 
@@ -149,6 +150,7 @@ KBUILD_CFLAGS_32 += -m32 -msoft-float -mregparm=0 -fpic
 KBUILD_CFLAGS_32 += $(call cc-option, -fno-stack-protector)
 KBUILD_CFLAGS_32 += $(call cc-option, -foptimize-sibling-calls)
 KBUILD_CFLAGS_32 += -fno-omit-frame-pointer
+KBUILD_CFLAGS_32 += -DDISABLE_BRANCH_PROFILING
 $(vdso32-images:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
 
 $(vdso32-images:%=$(obj)/%.dbg): $(obj)/vdso32-%.so.dbg: FORCE \
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index b2e4f49..9793322 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -11,9 +11,6 @@
  * Check with readelf after changing.
  */
 
-/* Disable profiling for userspace code: */
-#define DISABLE_BRANCH_PROFILING
-
 #include <uapi/linux/time.h>
 #include <asm/vgtod.h>
 #include <asm/hpet.h>
-- 
1.9.3

[PATCH 2/2] x86,vdso2c: Error out if DT_RELA is present

[Andy Lutomirski]

It was missing from the list of inappropriate dynamic entries.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/vdso2c.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index f42e2dd..df95a2f 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -164,7 +164,7 @@ static void BITSFUNC(go)(void *addr, size_t len,
 	for (i = 0; dyn + i < dyn_end &&
 		     GET_LE(&dyn[i].d_tag) != DT_NULL; i++) {
 		typeof(dyn[i].d_tag) tag = GET_LE(&dyn[i].d_tag);
-		if (tag == DT_REL || tag == DT_RELSZ ||
+		if (tag == DT_REL || tag == DT_RELSZ || tag == DT_RELA ||
 		    tag == DT_RELENT || tag == DT_TEXTREL)
 			fail("vdso image contains dynamic relocations\n");
 	}
-- 
1.9.3

Re: [PATCH 1/2] x86,vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile

[H. Peter Anvin]

On 06/24/2014 12:50 PM, Andy Lutomirski wrote:
> It should really apply to everything in the vdso, and putting it in
> the C files seems unreliable.

Please write a more detailed patch description.  In this case, it was
causing build failures, and that should be noted in the description.

> It was missing from the list of inappropriate dynamic entries.

Same here -- what kind of problems does this cause or indicate?

	-hpa

[PATCH v2 0/2] x86: Build fixes for tip/x86/urgent

[Andy Lutomirski]

For reasons that I don't quite understand, the current code to
disable branch profiling in the vdso wasn't working right.  Redo it
better.

Patch 2 is a sanity check: if that error happens, then something
is wrong with the vdso.

Changes from v1: Improved patch descriptions

Andy Lutomirski (2):
  x86,vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile
  x86,vdso2c: Error out if DT_RELA is present

 arch/x86/vdso/Makefile         | 4 +++-
 arch/x86/vdso/vclock_gettime.c | 3 ---
 arch/x86/vdso/vdso2c.h         | 2 +-
 3 files changed, 4 insertions(+), 5 deletions(-)

-- 
1.9.3

[PATCH v2 1/2] x86,vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile

[Andy Lutomirski]

DISABLE_BRANCH_PROFILING turns off branch profiling (i.e. a
redefinition of 'if').  Branch profiling depends on a bunch of
kernel-internal symbols and generates extra output sections, none of
which are useful or functional in the vDSO.

It's currently turned off for vclock_gettime.c, but vgetcpu.c also
triggers branch profiling, so just turn it off in the makefile.

This fixes the build on some configurations: the vdso could contain
undefined symbols, and the fake section table overflowed due to
ftrace's added sections.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/Makefile         | 4 +++-
 arch/x86/vdso/vclock_gettime.c | 3 ---
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 68a15c4..61b04fe 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -66,7 +66,8 @@ $(obj)/vdso-image-%.c: $(obj)/vdso%.so.dbg $(obj)/vdso2c FORCE
 #
 CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \
        $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) \
-       -fno-omit-frame-pointer -foptimize-sibling-calls
+       -fno-omit-frame-pointer -foptimize-sibling-calls \
+       -DDISABLE_BRANCH_PROFILING
 
 $(vobjs): KBUILD_CFLAGS += $(CFL)
 
@@ -149,6 +150,7 @@ KBUILD_CFLAGS_32 += -m32 -msoft-float -mregparm=0 -fpic
 KBUILD_CFLAGS_32 += $(call cc-option, -fno-stack-protector)
 KBUILD_CFLAGS_32 += $(call cc-option, -foptimize-sibling-calls)
 KBUILD_CFLAGS_32 += -fno-omit-frame-pointer
+KBUILD_CFLAGS_32 += -DDISABLE_BRANCH_PROFILING
 $(vdso32-images:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
 
 $(vdso32-images:%=$(obj)/%.dbg): $(obj)/vdso32-%.so.dbg: FORCE \
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index b2e4f49..9793322 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -11,9 +11,6 @@
  * Check with readelf after changing.
  */
 
-/* Disable profiling for userspace code: */
-#define DISABLE_BRANCH_PROFILING
-
 #include <uapi/linux/time.h>
 #include <asm/vgtod.h>
 #include <asm/hpet.h>
-- 
1.9.3

[PATCH v2 2/2] x86,vdso2c: Error out if DT_RELA is present

[Andy Lutomirski]

vdso2c was checking for various types of relocations to detect when
the vdso had undefined symbols or was otherwise dependent on
relocation at load time.  Undefined symbols in the vdso would fail if
accessed at runtime, and certain implementation errors (e.g. branch
profiling or incorrect symbol visibilities) could result in data
access through the GOT that requires relocations.  This could be
as simple as:

    extern char foo;
    return foo;

Without some kind of visibility control, the compiler would assume
that foo could be interposed at load time and would generate a
relocation.

My toolchain emits explicit-addent (RELA) instead of implicit-addent
(REL) relocations for data access, and vdso2c forgot to detect those.

Whether these bad relocations would actually fail at runtime depends
on what the linker sticks in the unrelocated references.  Nonetheless,
these relocations have no business existing in the vDSO and should be
fixed rather than silently ignored.

This error could trigger on some configurations due to branch
profiling.  The previous patch fixed that.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
---
 arch/x86/vdso/vdso2c.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index f42e2dd..df95a2f 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -164,7 +164,7 @@ static void BITSFUNC(go)(void *addr, size_t len,
 	for (i = 0; dyn + i < dyn_end &&
 		     GET_LE(&dyn[i].d_tag) != DT_NULL; i++) {
 		typeof(dyn[i].d_tag) tag = GET_LE(&dyn[i].d_tag);
-		if (tag == DT_REL || tag == DT_RELSZ ||
+		if (tag == DT_REL || tag == DT_RELSZ || tag == DT_RELA ||
 		    tag == DT_RELENT || tag == DT_TEXTREL)
 			fail("vdso image contains dynamic relocations\n");
 	}
-- 
1.9.3

[tip:x86/urgent] x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile

[tip-bot for Andy Lutomirski]

Commit-ID:  46b57a76930f01ebf31230ed35af5beeccb5ad95
Gitweb:     http://git.kernel.org/tip/46b57a76930f01ebf31230ed35af5beeccb5ad95
Author:     Andy Lutomirski <luto@amacapital.net>
AuthorDate: Tue, 24 Jun 2014 13:46:52 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Tue, 24 Jun 2014 13:53:00 -0700

x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile

DISABLE_BRANCH_PROFILING turns off branch profiling (i.e. a
redefinition of 'if').  Branch profiling depends on a bunch of
kernel-internal symbols and generates extra output sections, none of
which are useful or functional in the vDSO.

It's currently turned off for vclock_gettime.c, but vgetcpu.c also
triggers branch profiling, so just turn it off in the makefile.

This fixes the build on some configurations: the vdso could contain
undefined symbols, and the fake section table overflowed due to
ftrace's added sections.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/bf1ec29e03b2bbc081f6dcaefa64db1c3a83fb21.1403642755.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/vdso/Makefile         | 4 +++-
 arch/x86/vdso/vclock_gettime.c | 3 ---
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 68a15c4..61b04fe 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -66,7 +66,8 @@ $(obj)/vdso-image-%.c: $(obj)/vdso%.so.dbg $(obj)/vdso2c FORCE
 #
 CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \
        $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) \
-       -fno-omit-frame-pointer -foptimize-sibling-calls
+       -fno-omit-frame-pointer -foptimize-sibling-calls \
+       -DDISABLE_BRANCH_PROFILING
 
 $(vobjs): KBUILD_CFLAGS += $(CFL)
 
@@ -149,6 +150,7 @@ KBUILD_CFLAGS_32 += -m32 -msoft-float -mregparm=0 -fpic
 KBUILD_CFLAGS_32 += $(call cc-option, -fno-stack-protector)
 KBUILD_CFLAGS_32 += $(call cc-option, -foptimize-sibling-calls)
 KBUILD_CFLAGS_32 += -fno-omit-frame-pointer
+KBUILD_CFLAGS_32 += -DDISABLE_BRANCH_PROFILING
 $(vdso32-images:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
 
 $(vdso32-images:%=$(obj)/%.dbg): $(obj)/vdso32-%.so.dbg: FORCE \
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index b2e4f49..9793322 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -11,9 +11,6 @@
  * Check with readelf after changing.
  */
 
-/* Disable profiling for userspace code: */
-#define DISABLE_BRANCH_PROFILING
-
 #include <uapi/linux/time.h>
 #include <asm/vgtod.h>
 #include <asm/hpet.h>

[tip:x86/urgent] x86/vdso: Error out in vdso2c if DT_RELA is present

[tip-bot for Andy Lutomirski]

Commit-ID:  6a89d71078dad9b1c49ccdf1ffa656fbe36ccd1e
Gitweb:     http://git.kernel.org/tip/6a89d71078dad9b1c49ccdf1ffa656fbe36ccd1e
Author:     Andy Lutomirski <luto@amacapital.net>
AuthorDate: Tue, 24 Jun 2014 13:46:53 -0700
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Tue, 24 Jun 2014 13:53:57 -0700

x86/vdso: Error out in vdso2c if DT_RELA is present

vdso2c was checking for various types of relocations to detect when
the vdso had undefined symbols or was otherwise dependent on
relocation at load time.  Undefined symbols in the vdso would fail if
accessed at runtime, and certain implementation errors (e.g. branch
profiling or incorrect symbol visibilities) could result in data
access through the GOT that requires relocations.  This could be
as simple as:

    extern char foo;
    return foo;

Without some kind of visibility control, the compiler would assume
that foo could be interposed at load time and would generate a
relocation.

x86-64 and x32 (as opposed to i386) use explicit-addent (RELA) instead
of implicit-addent (REL) relocations for data access, and vdso2c
forgot to detect those.

Whether these bad relocations would actually fail at runtime depends
on what the linker sticks in the unrelocated references.  Nonetheless,
these relocations have no business existing in the vDSO and should be
fixed rather than silently ignored.

This error could trigger on some configurations due to branch
profiling.  The previous patch fixed that.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/74ef0c00b4d2a3b573e00a4113874e62f772e348.1403642755.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/vdso/vdso2c.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h
index f42e2dd..df95a2f 100644
--- a/arch/x86/vdso/vdso2c.h
+++ b/arch/x86/vdso/vdso2c.h
@@ -164,7 +164,7 @@ static void BITSFUNC(go)(void *addr, size_t len,
 	for (i = 0; dyn + i < dyn_end &&
 		     GET_LE(&dyn[i].d_tag) != DT_NULL; i++) {
 		typeof(dyn[i].d_tag) tag = GET_LE(&dyn[i].d_tag);
-		if (tag == DT_REL || tag == DT_RELSZ ||
+		if (tag == DT_REL || tag == DT_RELSZ || tag == DT_RELA ||
 		    tag == DT_RELENT || tag == DT_TEXTREL)
 			fail("vdso image contains dynamic relocations\n");
 	}