From: Wei Ni <wni@nvidia.com>
To: Mikko Perttunen <mperttunen@nvidia.com>, <edubezval@gmail.com>,
<khali@linux-fr.org>, <linux@roeck-us.net>,
<swarren@wwwdotorg.org>
Cc: <lm-sensors@lm-sensors.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 1/4] hwmon: (lm90) split set&show temp as common codes
Date: Tue, 26 Aug 2014 10:27:43 +0800 [thread overview]
Message-ID: <53FBF09F.8050502@nvidia.com> (raw)
In-Reply-To: <53FB2AAA.30601@nvidia.com>
On 08/25/2014 08:23 PM, Mikko Perttunen wrote:
> FWIW, please fix the authorship information for next version.
Sorry, I didn't get your point, did you mean I should remove the line
"From: lightning314 <wni@nvidia.com>" ? Yes I made a mistake on it, I
will remove it in next version.
Thanks.
Wei.
>
> Cheers,
> Mikko
>
> On 25/08/14 09:29, Wei Ni wrote:
>> From: lightning314 <wni@nvidia.com>
>>
>> Split set&show temp codes as common functions, so we can use it
>> directly when implement linux thermal framework.
>> And handle error return value for the lm90_select_remote_channel
>> and write_tempx, then set_temp8 and set_temp11 could return it
>> to user-space.
>>
>> Signed-off-by: Wei Ni <wni@nvidia.com>
>> Signed-off-by: Jean Delvare <khali@linux-fr.org>
>> ---
>> drivers/hwmon/lm90.c | 164
>> ++++++++++++++++++++++++++++++++++-----------------
>> 1 file changed, 109 insertions(+), 55 deletions(-)
>>
>> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
>> index c9ff08d..cb33dcf 100644
>> --- a/drivers/hwmon/lm90.c
>> +++ b/drivers/hwmon/lm90.c
>> @@ -473,20 +473,23 @@ static int lm90_read16(struct i2c_client
>> *client, u8 regh, u8 regl, u16 *value)
>> * various registers have different meanings as a result of selecting a
>> * non-default remote channel.
>> */
>> -static inline void lm90_select_remote_channel(struct i2c_client *client,
>> - struct lm90_data *data,
>> - int channel)
>> +static inline int lm90_select_remote_channel(struct i2c_client *client,
>> + struct lm90_data *data,
>> + int channel)
>> {
>> u8 config;
>> + int err = 0;
>>
>> if (data->kind == max6696) {
>> lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
>> config &= ~0x08;
>> if (channel)
>> config |= 0x08;
>> - i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
>> - config);
>> + err = i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
>> + config);
>> }
>> +
>> + return err;
>> }
>>
>> /*
>> @@ -759,29 +762,34 @@ static u16 temp_to_u16_adt7461(struct lm90_data
>> *data, long val)
>> * Sysfs stuff
>> */
>>
>> -static ssize_t show_temp8(struct device *dev, struct device_attribute
>> *devattr,
>> - char *buf)
>> +static int read_temp8(struct device *dev, int index)
>> {
>> - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>> struct lm90_data *data = lm90_update_device(dev);
>> int temp;
>>
>> if (data->kind == adt7461 || data->kind == tmp451)
>> - temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
>> + temp = temp_from_u8_adt7461(data, data->temp8[index]);
>> else if (data->kind == max6646)
>> - temp = temp_from_u8(data->temp8[attr->index]);
>> + temp = temp_from_u8(data->temp8[index]);
>> else
>> - temp = temp_from_s8(data->temp8[attr->index]);
>> + temp = temp_from_s8(data->temp8[index]);
>>
>> /* +16 degrees offset for temp2 for the LM99 */
>> - if (data->kind == lm99 && attr->index == 3)
>> + if (data->kind == lm99 && index == 3)
>> temp += 16000;
>>
>> - return sprintf(buf, "%d\n", temp);
>> + return temp;
>> }
>>
>> -static ssize_t set_temp8(struct device *dev, struct device_attribute
>> *devattr,
>> - const char *buf, size_t count)
>> +static ssize_t show_temp8(struct device *dev, struct device_attribute
>> *devattr,
>> + char *buf)
>> +{
>> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>> +
>> + return sprintf(buf, "%d\n", read_temp8(dev, attr->index));
>> +}
>> +
>> +static int write_temp8(struct device *dev, int index, long val)
>> {
>> static const u8 reg[TEMP8_REG_NUM] = {
>> LM90_REG_W_LOCAL_LOW,
>> @@ -794,60 +802,79 @@ static ssize_t set_temp8(struct device *dev,
>> struct device_attribute *devattr,
>> MAX6659_REG_W_REMOTE_EMERG,
>> };
>>
>> - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>> struct lm90_data *data = dev_get_drvdata(dev);
>> struct i2c_client *client = data->client;
>> - int nr = attr->index;
>> - long val;
>> int err;
>>
>> - err = kstrtol(buf, 10, &val);
>> - if (err < 0)
>> - return err;
>> -
>> /* +16 degrees offset for temp2 for the LM99 */
>> - if (data->kind == lm99 && attr->index == 3)
>> + if (data->kind == lm99 && index == 3)
>> val -= 16000;
>>
>> mutex_lock(&data->update_lock);
>> if (data->kind == adt7461 || data->kind == tmp451)
>> - data->temp8[nr] = temp_to_u8_adt7461(data, val);
>> + data->temp8[index] = temp_to_u8_adt7461(data, val);
>> else if (data->kind == max6646)
>> - data->temp8[nr] = temp_to_u8(val);
>> + data->temp8[index] = temp_to_u8(val);
>> else
>> - data->temp8[nr] = temp_to_s8(val);
>> -
>> - lm90_select_remote_channel(client, data, nr >= 6);
>> - i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]);
>> - lm90_select_remote_channel(client, data, 0);
>> + data->temp8[index] = temp_to_s8(val);
>>
>> + if ((err = lm90_select_remote_channel(client, data, index >= 6)) ||
>> + (err = i2c_smbus_write_byte_data(client, reg[index],
>> + data->temp8[index])) ||
>> + (err = lm90_select_remote_channel(client, data, 0)))
>> + dev_err(dev, "write_temp8 failed, err %d\n", err);
>> mutex_unlock(&data->update_lock);
>> +
>> + return err;
>> +}
>> +
>> +static ssize_t set_temp8(struct device *dev, struct device_attribute
>> *devattr,
>> + const char *buf, size_t count)
>> +{
>> + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>> + int index = attr->index;
>> + long val;
>> + int err;
>> +
>> + err = kstrtol(buf, 10, &val);
>> + if (err < 0)
>> + return err;
>> +
>> + err = write_temp8(dev, index, val);
>> + if (err < 0)
>> + return err;
>> +
>> return count;
>> }
>>
>> -static ssize_t show_temp11(struct device *dev, struct
>> device_attribute *devattr,
>> - char *buf)
>> +static int read_temp11(struct device *dev, int index)
>> {
>> - struct sensor_device_attribute_2 *attr =
>> to_sensor_dev_attr_2(devattr);
>> struct lm90_data *data = lm90_update_device(dev);
>> int temp;
>>
>> if (data->kind == adt7461 || data->kind == tmp451)
>> - temp = temp_from_u16_adt7461(data, data->temp11[attr->index]);
>> + temp = temp_from_u16_adt7461(data, data->temp11[index]);
>> else if (data->kind == max6646)
>> - temp = temp_from_u16(data->temp11[attr->index]);
>> + temp = temp_from_u16(data->temp11[index]);
>> else
>> - temp = temp_from_s16(data->temp11[attr->index]);
>> + temp = temp_from_s16(data->temp11[index]);
>>
>> /* +16 degrees offset for temp2 for the LM99 */
>> - if (data->kind == lm99 && attr->index <= 2)
>> + if (data->kind == lm99 && index <= 2)
>> temp += 16000;
>>
>> - return sprintf(buf, "%d\n", temp);
>> + return temp;
>> }
>>
>> -static ssize_t set_temp11(struct device *dev, struct device_attribute
>> *devattr,
>> - const char *buf, size_t count)
>> +static ssize_t show_temp11(struct device *dev, struct
>> device_attribute *devattr,
>> + char *buf)
>> +{
>> + struct sensor_device_attribute_2 *attr =
>> to_sensor_dev_attr_2(devattr);
>> +
>> + return sprintf(buf, "%d\n", read_temp11(dev, attr->index));
>> +}
>> +
>> +static int write_temp11(struct device *dev, int nr, int index, long val)
>> {
>> struct {
>> u8 high;
>> @@ -861,18 +888,10 @@ static ssize_t set_temp11(struct device *dev,
>> struct device_attribute *devattr,
>> { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 1 }
>> };
>>
>> - struct sensor_device_attribute_2 *attr =
>> to_sensor_dev_attr_2(devattr);
>> struct lm90_data *data = dev_get_drvdata(dev);
>> struct i2c_client *client = data->client;
>> - int nr = attr->nr;
>> - int index = attr->index;
>> - long val;
>> int err;
>>
>> - err = kstrtol(buf, 10, &val);
>> - if (err < 0)
>> - return err;
>> -
>> /* +16 degrees offset for temp2 for the LM99 */
>> if (data->kind == lm99 && index <= 2)
>> val -= 16000;
>> @@ -887,15 +906,50 @@ static ssize_t set_temp11(struct device *dev,
>> struct device_attribute *devattr,
>> else
>> data->temp11[index] = temp_to_s8(val) << 8;
>>
>> - lm90_select_remote_channel(client, data, reg[nr].channel);
>> - i2c_smbus_write_byte_data(client, reg[nr].high,
>> - data->temp11[index] >> 8);
>> - if (data->flags & LM90_HAVE_REM_LIMIT_EXT)
>> - i2c_smbus_write_byte_data(client, reg[nr].low,
>> - data->temp11[index] & 0xff);
>> - lm90_select_remote_channel(client, data, 0);
>> + err = lm90_select_remote_channel(client, data, reg[nr].channel);
>> + if (err)
>> + goto error;
>> +
>> + err = i2c_smbus_write_byte_data(client, reg[nr].high,
>> + data->temp11[index] >> 8);
>> + if (err)
>> + goto error;
>> +
>> + if (data->flags & LM90_HAVE_REM_LIMIT_EXT) {
>> + err = i2c_smbus_write_byte_data(client, reg[nr].low,
>> + data->temp11[index] & 0xff);
>> + if (err)
>> + goto error;
>> + }
>> +
>> + err = lm90_select_remote_channel(client, data, 0);
>> +
>> +error:
>> + if (err)
>> + dev_err(dev, "write_temp11 failed, err %d\n", err);
>>
>> mutex_unlock(&data->update_lock);
>> +
>> + return err;
>> +}
>> +
>> +static ssize_t set_temp11(struct device *dev, struct device_attribute
>> *devattr,
>> + const char *buf, size_t count)
>> +{
>> + struct sensor_device_attribute_2 *attr =
>> to_sensor_dev_attr_2(devattr);
>> + int nr = attr->nr;
>> + int index = attr->index;
>> + long val;
>> + int err;
>> +
>> + err = kstrtol(buf, 10, &val);
>> + if (err < 0)
>> + return err;
>> +
>> + err = write_temp11(dev, nr, index, val);
>> + if (err < 0)
>> + return err;
>> +
>> return count;
>> }
>>
>>
next prev parent reply other threads:[~2014-08-26 2:27 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-25 6:29 [PATCH v3 0/4] expose lm90 to thermal fw Wei Ni
2014-08-25 6:29 ` [PATCH v3 1/4] hwmon: (lm90) split set&show temp as common codes Wei Ni
2014-08-25 12:23 ` Mikko Perttunen
2014-08-26 2:27 ` Wei Ni [this message]
2014-08-26 12:17 ` Eduardo Valentin
2014-08-26 16:37 ` Stephen Warren
2014-08-27 2:25 ` Wei Ni
2014-08-25 6:29 ` [PATCH v3 2/4] hwmon: lm90: expose to thermal fw via DT nodes Wei Ni
2014-08-25 6:29 ` [PATCH v3 3/4] thermal: add more description for thermal-zones Wei Ni
2014-08-25 11:07 ` Eduardo Valentin
2014-08-26 2:17 ` Wei Ni
2014-08-26 12:12 ` Eduardo Valentin
2014-08-27 2:54 ` Wei Ni
2014-08-27 13:32 ` Eduardo Valentin
2014-08-28 1:50 ` Wei Ni
2014-08-28 13:21 ` Eduardo Valentin
2014-08-29 3:03 ` Wei Ni
2014-08-29 11:32 ` edubezval
2014-09-01 10:26 ` Wei Ni
2014-09-05 9:41 ` Wei Ni
2014-08-30 19:43 ` Eduardo Valentin
2014-09-10 8:14 ` Wei Ni
2014-09-10 14:10 ` Eduardo Valentin
2014-08-26 3:03 ` Wei Ni
2014-08-26 12:08 ` Eduardo Valentin
2014-08-27 2:31 ` Wei Ni
2014-08-25 6:29 ` [PATCH v3 4/4] ARM: tegra: dalmore: add thermal zones for nct1008 Wei Ni
2014-08-25 11:08 ` Eduardo Valentin
2014-08-26 2:21 ` Wei Ni
2014-08-25 11:10 ` Eduardo Valentin
2014-08-26 2:24 ` Wei Ni
-- strict thread matches above, loose matches on Subject: below --
2013-07-12 7:48 [PATCH v3 0/4] Lm90 Enhancements Wei Ni
2013-07-12 7:48 ` [PATCH v3 1/4] hwmon: (lm90) split set&show temp as common codes Wei Ni
2013-07-12 13:26 ` Jean Delvare
2013-07-12 13:50 ` Guenter Roeck
2013-07-12 14:30 ` Jean Delvare
2013-07-12 14:40 ` Guenter Roeck
2013-07-15 6:25 ` Wei Ni
2013-07-15 7:24 ` Jean Delvare
2013-07-15 9:14 ` Wei Ni
2013-07-15 17:52 ` Jean Delvare
2013-07-17 4:26 ` Thierry Reding
2013-07-17 5:14 ` Guenter Roeck
2013-07-17 6:26 ` Wei Ni
2013-07-17 9:11 ` Jean Delvare
2013-07-17 9:54 ` Wei Ni
2013-07-15 6:05 ` Wei Ni
2013-07-15 7:29 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FBF09F.8050502@nvidia.com \
--to=wni@nvidia.com \
--cc=edubezval@gmail.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mperttunen@nvidia.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).