* Re: [ANNOUNCE]: SCST 3.0 released
[not found] <scr50ftb8lekn4h1of5mqdd9.1411196360032@email.android.com>
@ 2014-09-22 4:28 ` Vladislav Bolkhovitin
0 siblings, 0 replies; 2+ messages in thread
From: Vladislav Bolkhovitin @ 2014-09-22 4:28 UTC (permalink / raw)
To: scst.niko; +Cc: scst-devel, linux-kernel, linux-scsi
No, because it's too new, but you can always get it from the git. Or you
can use stable Emulex driver for 16Gb connectivity. It's not in the
bundle only because of the Emulex policy.
Thanks,
Vlad
On 9/19/2014 23:59, scst.niko@gmail.com wrote:
> Does 16Gb qla2x00t included?
>
> 发自我的小米手机
>
> Vladislav Bolkhovitin <vst@vlnb.net>于 2014-9-20 下午2:39写道:
>
> Hi All,
>
> I'm glad to announce that SCST 3.0 has just been released. This
> release includes SCST
> core, target drivers iSCSI-SCST for iSCSI, including iSER support
> (thanks to
> Mellanox!), qla2x00t for QLogic Fibre Channel adapters, ib_srpt for
> InfiniBand SRP,
> fcst for FCoE and scst_local for local loopback-like access as well
> as SCST management
> utility scstadmin. Also separately you can download from Emulex
> development portal
> stable and fully functional target driver for the current generation
> of Emulex Fibre
> Channel adapters.
>
> SCST is alternative SCSI target stack for Linux. SCST allows
> creation of sophisticated
> storage devices, which provide advanced functionality, like
> replication, thin
> provisioning, deduplication, high availability, automatic backup,
> etc. Majority of
> recently developed SAN appliances, especially higher end ones, are
> SCST based. It might
> well be that your favorite storage appliance running SCST in the
> firmware.
>
> More info about SCST and its modules you can find on:
> http://scst.sourceforge.net
>
> Thanks to all who made it happen!
>
> Vlad
^ permalink raw reply [flat|nested] 2+ messages in thread
* [ANNOUNCE]: SCST 3.0 released
@ 2014-09-20 6:39 Vladislav Bolkhovitin
0 siblings, 0 replies; 2+ messages in thread
From: Vladislav Bolkhovitin @ 2014-09-20 6:39 UTC (permalink / raw)
To: scst-devel; +Cc: linux-kernel, linux-scsi
Hi All,
I'm glad to announce that SCST 3.0 has just been released. This release includes SCST
core, target drivers iSCSI-SCST for iSCSI, including iSER support (thanks to
Mellanox!), qla2x00t for QLogic Fibre Channel adapters, ib_srpt for InfiniBand SRP,
fcst for FCoE and scst_local for local loopback-like access as well as SCST management
utility scstadmin. Also separately you can download from Emulex development portal
stable and fully functional target driver for the current generation of Emulex Fibre
Channel adapters.
SCST is alternative SCSI target stack for Linux. SCST allows creation of sophisticated
storage devices, which provide advanced functionality, like replication, thin
provisioning, deduplication, high availability, automatic backup, etc. Majority of
recently developed SAN appliances, especially higher end ones, are SCST based. It might
well be that your favorite storage appliance running SCST in the firmware.
More info about SCST and its modules you can find on: http://scst.sourceforge.net
Thanks to all who made it happen!
Vlad
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-09-22 4:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <scr50ftb8lekn4h1of5mqdd9.1411196360032@email.android.com>
2014-09-22 4:28 ` [ANNOUNCE]: SCST 3.0 released Vladislav Bolkhovitin
2014-09-20 6:39 Vladislav Bolkhovitin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).