[PATCH v2] ARM: dts: add bcm2835-pwm bindings

[PATCH v2] ARM: dts: add bcm2835-pwm bindings

[Bart Tanghe]

To probe the bcm2835-pwm driver properly, this dts bindings has to be added 
to the bcm2835 dtsi file.
In expectation of a bcm2835 clock driver, I've added fixed-clock clock binding.
---
Changes in v2:
 - status set to disabled
 - follow the clock naming convention

Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be>

diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 3342cb1..ba76bb4 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -146,6 +147,14 @@
 			interrupts = <1 9>;
 		};
 
+		pwm: pwm@7e20e000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clk_pwm>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		arm-pmu {
 			compatible = "arm,arm1176-pmu";
 		};
@@ -179,5 +188,13 @@
 			clock-output-names = "spi";
 			clock-frequency = <250000000>;
 		};
+
+		clk_pwm: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-output-names = "pwm";
+			clock-frequency = <9200000>;
+		};
 	};
 };

Re: [PATCH v2] ARM: dts: add bcm2835-pwm bindings

[Stephen Warren]

On 01/07/2015 04:00 AM, Bart Tanghe wrote:
> To probe the bcm2835-pwm driver properly, this dts bindings has to be added 
> to the bcm2835 dtsi file.
> In expectation of a bcm2835 clock driver, I've added fixed-clock clock binding.

> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi

> +		pwm: pwm@7e20e000 {
> +			compatible = "brcm,bcm2835-pwm";
> +			reg = <0x7e20c000 0x28>;
> +			clocks = <&clk_pwm>;
> +			#pwm-cells = <2>;
> +			status = "disabled";
> +		};

Can the nodes be kept sorted by reg value; I think this should be added
between the existing i2c@20205000 and sdhci@7e300000 nodes.

Aside from that,
Acked-by: Stephen Warren <swarren@wwwdotorg.org>