[PATCH v2 0/6] Add dwc3 usb3 DT node and various phy cleanup

[PATCH v2 0/6] Add dwc3 usb3 DT node and various phy cleanup

[Peter Griffin]

Hi,

This series primarily adds the dwc3 DT node which activates the usb3 controller on
the stih407-b2120 and stih410-b2120 platforms.

As part of getting this working I noticed some various errors with the DT
documentation examples for how we reference the PHYs which I've also fixed.

Whilst doing this I also noticed the miphy365 (found on stih415/6 platforms) could
now use the generic PHY constants which are used by miphy28, so I've updated this
driver and the DT docs accoringly. Note there is no ABI breakage with this change.

Also miphy28lp driver isn't included in STI section of MAINTAINERS, so rectify that.

regards,

Peter.

Changes in v2:
- Update commit to explicitly say no ABI breakage (Rob)
- Rebase series on v4.0-rc6 (Pete)
- Collect up Acks (Pete)

Peter Griffin (6):
  phy: miphy365x: Use the generic phy type constants in
    dt-bindings/phy/phy.h
  ahci: st: Update the DT example for how to obtain the PHY.
  ARM: DT: STi: STiH407: Update picophyreset for the usb3 controllers
    usb2 phy
  ARM: DT: STi: STiH407: Add dwc3 usb3 DT node.
  usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.
  MAINTAINERS: Add phy-miphy28lp.c to ARCH/STI architecture

 Documentation/devicetree/bindings/ata/ahci-st.txt  |  4 ++--
 .../devicetree/bindings/phy/phy-miphy365x.txt      |  8 +++----
 Documentation/devicetree/bindings/usb/dwc3-st.txt  |  7 +++---
 MAINTAINERS                                        |  1 +
 arch/arm/boot/dts/stih407-family.dtsi              | 27 +++++++++++++++++++++-
 arch/arm/boot/dts/stih416.dtsi                     |  4 ++--
 drivers/phy/phy-miphy365x.c                        | 14 +++++------
 include/dt-bindings/phy/phy-miphy365x.h            | 14 -----------
 8 files changed, 45 insertions(+), 34 deletions(-)
 delete mode 100644 include/dt-bindings/phy/phy-miphy365x.h

-- 
1.9.1

[PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Peter Griffin]

Now there are generic phy type constants declared in phy.h, migrate over to
using them rather than defining our own. This change has been done as one
atomic commit to be bisectable.

Note: The values of the defines are the same, so there is no ABI breakage
with this patch.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/devicetree/bindings/phy/phy-miphy365x.txt |  8 ++++----
 arch/arm/boot/dts/stih416.dtsi                          |  4 ++--
 drivers/phy/phy-miphy365x.c                             | 14 +++++++-------
 include/dt-bindings/phy/phy-miphy365x.h                 | 14 --------------
 4 files changed, 13 insertions(+), 27 deletions(-)
 delete mode 100644 include/dt-bindings/phy/phy-miphy365x.h

diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
index 9802d5d..8772900 100644
--- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
+++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
@@ -20,8 +20,8 @@ Required nodes	:  A sub-node is required for each channel the controller
 Required properties (port (child) node):
 - #phy-cells 	: Should be 1 (See second example)
 		  Cell after port phandle is device type from:
-			- MIPHY_TYPE_SATA
-			- MIPHY_TYPE_PCI
+			- PHY_TYPE_SATA
+			- PHY_TYPE_PCI
 - reg        	: Address and length of register sets for each device in
 		  "reg-names"
 - reg-names     : The names of the register addresses corresponding to the
@@ -68,10 +68,10 @@ property, containing a phandle to the phy port node and a device type.
 
 Example:
 
-#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/phy/phy.h>
 
 	sata0: sata@fe380000 {
 		...
-		phys	  = <&phy_port0 MIPHY_TYPE_SATA>;
+		phys	  = <&phy_port0 PHY_TYPE_SATA>;
 		...
 	};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index ea28eba..eeb7afe 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -10,7 +10,7 @@
 #include "stih416-clock.dtsi"
 #include "stih416-pinctrl.dtsi"
 
-#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset-controller/stih416-resets.h>
 / {
@@ -306,7 +306,7 @@
 			reg             = <0xfe380000 0x1000>;
 			interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
 			interrupt-names = "hostc";
-			phys	        = <&phy_port0 MIPHY_TYPE_SATA>;
+			phys	        = <&phy_port0 PHY_TYPE_SATA>;
 			phy-names       = "sata-phy";
 			resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
 					  <&softreset STIH416_SATA0_SOFTRESET>;
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
index 51b459d..019c2d7 100644
--- a/drivers/phy/phy-miphy365x.c
+++ b/drivers/phy/phy-miphy365x.c
@@ -25,7 +25,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
-#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/phy/phy.h>
 
 #define HFC_TIMEOUT		100
 
@@ -177,7 +177,7 @@ static u8 rx_tx_spd[] = {
 static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
 			      struct miphy365x_dev *miphy_dev)
 {
-	bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
+	bool sata = (miphy_phy->type == PHY_TYPE_SATA);
 
 	return regmap_update_bits(miphy_dev->regmap,
 				  miphy_phy->ctrlreg,
@@ -431,7 +431,7 @@ static int miphy365x_init(struct phy *phy)
 	}
 
 	/* Initialise Miphy for PCIe or SATA */
-	if (miphy_phy->type == MIPHY_TYPE_PCIE)
+	if (miphy_phy->type == PHY_TYPE_PCIE)
 		ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev);
 	else
 		ret = miphy365x_init_sata_port(miphy_phy, miphy_dev);
@@ -455,8 +455,8 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
 		return ret;
 	}
 
-	if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
-	      (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
+	if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) ||
+	      (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE)))
 		return 0;
 
 	miphy_phy->base = of_iomap(phynode, index);
@@ -499,8 +499,8 @@ static struct phy *miphy365x_xlate(struct device *dev,
 
 	miphy_phy->type = args->args[0];
 
-	if (!(miphy_phy->type == MIPHY_TYPE_SATA ||
-	      miphy_phy->type == MIPHY_TYPE_PCIE)) {
+	if (!(miphy_phy->type == PHY_TYPE_SATA ||
+	      miphy_phy->type == PHY_TYPE_PCIE)) {
 		dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type);
 		return ERR_PTR(-EINVAL);
 	}
diff --git a/include/dt-bindings/phy/phy-miphy365x.h b/include/dt-bindings/phy/phy-miphy365x.h
deleted file mode 100644
index 8ef8aba..0000000
--- a/include/dt-bindings/phy/phy-miphy365x.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * This header provides constants for the phy framework
- * based on the STMicroelectronics MiPHY365x.
- *
- * Author: Lee Jones <lee.jones@linaro.org>
- */
-#ifndef _DT_BINDINGS_PHY_MIPHY
-#define _DT_BINDINGS_PHY_MIPHY
-
-#define MIPHY_TYPE_SATA		1
-#define MIPHY_TYPE_PCIE		2
-#define MIPHY_TYPE_USB		3
-
-#endif /* _DT_BINDINGS_PHY_MIPHY */
-- 
1.9.1

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Kishon Vijay Abraham I]

Hi Patrice, Maxime,

On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
> Now there are generic phy type constants declared in phy.h, migrate over to
> using them rather than defining our own. This change has been done as one
> atomic commit to be bisectable.
>
> Note: The values of the defines are the same, so there is no ABI breakage
> with this patch.
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>

Are you okay for this patch to go via PHY tree? It modifies arch/arm/boot/dts
/stih416.dtsi.

Thanks
Kishon
> ---
>   Documentation/devicetree/bindings/phy/phy-miphy365x.txt |  8 ++++----
>   arch/arm/boot/dts/stih416.dtsi                          |  4 ++--
>   drivers/phy/phy-miphy365x.c                             | 14 +++++++-------
>   include/dt-bindings/phy/phy-miphy365x.h                 | 14 --------------
>   4 files changed, 13 insertions(+), 27 deletions(-)
>   delete mode 100644 include/dt-bindings/phy/phy-miphy365x.h
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> index 9802d5d..8772900 100644
> --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> @@ -20,8 +20,8 @@ Required nodes	:  A sub-node is required for each channel the controller
>   Required properties (port (child) node):
>   - #phy-cells 	: Should be 1 (See second example)
>   		  Cell after port phandle is device type from:
> -			- MIPHY_TYPE_SATA
> -			- MIPHY_TYPE_PCI
> +			- PHY_TYPE_SATA
> +			- PHY_TYPE_PCI
>   - reg        	: Address and length of register sets for each device in
>   		  "reg-names"
>   - reg-names     : The names of the register addresses corresponding to the
> @@ -68,10 +68,10 @@ property, containing a phandle to the phy port node and a device type.
>
>   Example:
>
> -#include <dt-bindings/phy/phy-miphy365x.h>
> +#include <dt-bindings/phy/phy.h>
>
>   	sata0: sata@fe380000 {
>   		...
> -		phys	  = <&phy_port0 MIPHY_TYPE_SATA>;
> +		phys	  = <&phy_port0 PHY_TYPE_SATA>;
>   		...
>   	};
> diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> index ea28eba..eeb7afe 100644
> --- a/arch/arm/boot/dts/stih416.dtsi
> +++ b/arch/arm/boot/dts/stih416.dtsi
> @@ -10,7 +10,7 @@
>   #include "stih416-clock.dtsi"
>   #include "stih416-pinctrl.dtsi"
>
> -#include <dt-bindings/phy/phy-miphy365x.h>
> +#include <dt-bindings/phy/phy.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/reset-controller/stih416-resets.h>
>   / {
> @@ -306,7 +306,7 @@
>   			reg             = <0xfe380000 0x1000>;
>   			interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
>   			interrupt-names = "hostc";
> -			phys	        = <&phy_port0 MIPHY_TYPE_SATA>;
> +			phys	        = <&phy_port0 PHY_TYPE_SATA>;
>   			phy-names       = "sata-phy";
>   			resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
>   					  <&softreset STIH416_SATA0_SOFTRESET>;
> diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
> index 51b459d..019c2d7 100644
> --- a/drivers/phy/phy-miphy365x.c
> +++ b/drivers/phy/phy-miphy365x.c
> @@ -25,7 +25,7 @@
>   #include <linux/mfd/syscon.h>
>   #include <linux/regmap.h>
>
> -#include <dt-bindings/phy/phy-miphy365x.h>
> +#include <dt-bindings/phy/phy.h>
>
>   #define HFC_TIMEOUT		100
>
> @@ -177,7 +177,7 @@ static u8 rx_tx_spd[] = {
>   static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
>   			      struct miphy365x_dev *miphy_dev)
>   {
> -	bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
> +	bool sata = (miphy_phy->type == PHY_TYPE_SATA);
>
>   	return regmap_update_bits(miphy_dev->regmap,
>   				  miphy_phy->ctrlreg,
> @@ -431,7 +431,7 @@ static int miphy365x_init(struct phy *phy)
>   	}
>
>   	/* Initialise Miphy for PCIe or SATA */
> -	if (miphy_phy->type == MIPHY_TYPE_PCIE)
> +	if (miphy_phy->type == PHY_TYPE_PCIE)
>   		ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev);
>   	else
>   		ret = miphy365x_init_sata_port(miphy_phy, miphy_dev);
> @@ -455,8 +455,8 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
>   		return ret;
>   	}
>
> -	if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
> -	      (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
> +	if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) ||
> +	      (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE)))
>   		return 0;
>
>   	miphy_phy->base = of_iomap(phynode, index);
> @@ -499,8 +499,8 @@ static struct phy *miphy365x_xlate(struct device *dev,
>
>   	miphy_phy->type = args->args[0];
>
> -	if (!(miphy_phy->type == MIPHY_TYPE_SATA ||
> -	      miphy_phy->type == MIPHY_TYPE_PCIE)) {
> +	if (!(miphy_phy->type == PHY_TYPE_SATA ||
> +	      miphy_phy->type == PHY_TYPE_PCIE)) {
>   		dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type);
>   		return ERR_PTR(-EINVAL);
>   	}
> diff --git a/include/dt-bindings/phy/phy-miphy365x.h b/include/dt-bindings/phy/phy-miphy365x.h
> deleted file mode 100644
> index 8ef8aba..0000000
> --- a/include/dt-bindings/phy/phy-miphy365x.h
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -/*
> - * This header provides constants for the phy framework
> - * based on the STMicroelectronics MiPHY365x.
> - *
> - * Author: Lee Jones <lee.jones@linaro.org>
> - */
> -#ifndef _DT_BINDINGS_PHY_MIPHY
> -#define _DT_BINDINGS_PHY_MIPHY
> -
> -#define MIPHY_TYPE_SATA		1
> -#define MIPHY_TYPE_PCIE		2
> -#define MIPHY_TYPE_USB		3
> -
> -#endif /* _DT_BINDINGS_PHY_MIPHY */
>

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Lee Jones]

On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:

> Hi Patrice, Maxime,
> 
> On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
> >Now there are generic phy type constants declared in phy.h, migrate over to
> >using them rather than defining our own. This change has been done as one
> >atomic commit to be bisectable.
> >
> >Note: The values of the defines are the same, so there is no ABI breakage
> >with this patch.
> >
> >Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> >Acked-by: Rob Herring <robh@kernel.org>
> >Acked-by: Lee Jones <lee.jones@linaro.org>
> 
> Are you okay for this patch to go via PHY tree? It modifies arch/arm/boot/dts
> /stih416.dtsi.

These files need to be changed simultaneously in order to prevent
breakage during bisection and the like.  I think the best bet moving
forward is to pull this into its own branch, tag it and send Maxime a
pull-request to the immutable branch.  It's the best way to minimise
merge conflicts during the v4.1 merge window.

> >---
> >  Documentation/devicetree/bindings/phy/phy-miphy365x.txt |  8 ++++----
> >  arch/arm/boot/dts/stih416.dtsi                          |  4 ++--
> >  drivers/phy/phy-miphy365x.c                             | 14 +++++++-------
> >  include/dt-bindings/phy/phy-miphy365x.h                 | 14 --------------
> >  4 files changed, 13 insertions(+), 27 deletions(-)
> >  delete mode 100644 include/dt-bindings/phy/phy-miphy365x.h
> >
> >diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> >index 9802d5d..8772900 100644
> >--- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> >+++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> >@@ -20,8 +20,8 @@ Required nodes	:  A sub-node is required for each channel the controller
> >  Required properties (port (child) node):
> >  - #phy-cells 	: Should be 1 (See second example)
> >  		  Cell after port phandle is device type from:
> >-			- MIPHY_TYPE_SATA
> >-			- MIPHY_TYPE_PCI
> >+			- PHY_TYPE_SATA
> >+			- PHY_TYPE_PCI
> >  - reg        	: Address and length of register sets for each device in
> >  		  "reg-names"
> >  - reg-names     : The names of the register addresses corresponding to the
> >@@ -68,10 +68,10 @@ property, containing a phandle to the phy port node and a device type.
> >
> >  Example:
> >
> >-#include <dt-bindings/phy/phy-miphy365x.h>
> >+#include <dt-bindings/phy/phy.h>
> >
> >  	sata0: sata@fe380000 {
> >  		...
> >-		phys	  = <&phy_port0 MIPHY_TYPE_SATA>;
> >+		phys	  = <&phy_port0 PHY_TYPE_SATA>;
> >  		...
> >  	};
> >diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> >index ea28eba..eeb7afe 100644
> >--- a/arch/arm/boot/dts/stih416.dtsi
> >+++ b/arch/arm/boot/dts/stih416.dtsi
> >@@ -10,7 +10,7 @@
> >  #include "stih416-clock.dtsi"
> >  #include "stih416-pinctrl.dtsi"
> >
> >-#include <dt-bindings/phy/phy-miphy365x.h>
> >+#include <dt-bindings/phy/phy.h>
> >  #include <dt-bindings/interrupt-controller/arm-gic.h>
> >  #include <dt-bindings/reset-controller/stih416-resets.h>
> >  / {
> >@@ -306,7 +306,7 @@
> >  			reg             = <0xfe380000 0x1000>;
> >  			interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
> >  			interrupt-names = "hostc";
> >-			phys	        = <&phy_port0 MIPHY_TYPE_SATA>;
> >+			phys	        = <&phy_port0 PHY_TYPE_SATA>;
> >  			phy-names       = "sata-phy";
> >  			resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
> >  					  <&softreset STIH416_SATA0_SOFTRESET>;
> >diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
> >index 51b459d..019c2d7 100644
> >--- a/drivers/phy/phy-miphy365x.c
> >+++ b/drivers/phy/phy-miphy365x.c
> >@@ -25,7 +25,7 @@
> >  #include <linux/mfd/syscon.h>
> >  #include <linux/regmap.h>
> >
> >-#include <dt-bindings/phy/phy-miphy365x.h>
> >+#include <dt-bindings/phy/phy.h>
> >
> >  #define HFC_TIMEOUT		100
> >
> >@@ -177,7 +177,7 @@ static u8 rx_tx_spd[] = {
> >  static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
> >  			      struct miphy365x_dev *miphy_dev)
> >  {
> >-	bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
> >+	bool sata = (miphy_phy->type == PHY_TYPE_SATA);
> >
> >  	return regmap_update_bits(miphy_dev->regmap,
> >  				  miphy_phy->ctrlreg,
> >@@ -431,7 +431,7 @@ static int miphy365x_init(struct phy *phy)
> >  	}
> >
> >  	/* Initialise Miphy for PCIe or SATA */
> >-	if (miphy_phy->type == MIPHY_TYPE_PCIE)
> >+	if (miphy_phy->type == PHY_TYPE_PCIE)
> >  		ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev);
> >  	else
> >  		ret = miphy365x_init_sata_port(miphy_phy, miphy_dev);
> >@@ -455,8 +455,8 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
> >  		return ret;
> >  	}
> >
> >-	if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
> >-	      (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
> >+	if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) ||
> >+	      (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE)))
> >  		return 0;
> >
> >  	miphy_phy->base = of_iomap(phynode, index);
> >@@ -499,8 +499,8 @@ static struct phy *miphy365x_xlate(struct device *dev,
> >
> >  	miphy_phy->type = args->args[0];
> >
> >-	if (!(miphy_phy->type == MIPHY_TYPE_SATA ||
> >-	      miphy_phy->type == MIPHY_TYPE_PCIE)) {
> >+	if (!(miphy_phy->type == PHY_TYPE_SATA ||
> >+	      miphy_phy->type == PHY_TYPE_PCIE)) {
> >  		dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type);
> >  		return ERR_PTR(-EINVAL);
> >  	}
> >diff --git a/include/dt-bindings/phy/phy-miphy365x.h b/include/dt-bindings/phy/phy-miphy365x.h
> >deleted file mode 100644
> >index 8ef8aba..0000000
> >--- a/include/dt-bindings/phy/phy-miphy365x.h
> >+++ /dev/null
> >@@ -1,14 +0,0 @@
> >-/*
> >- * This header provides constants for the phy framework
> >- * based on the STMicroelectronics MiPHY365x.
> >- *
> >- * Author: Lee Jones <lee.jones@linaro.org>
> >- */
> >-#ifndef _DT_BINDINGS_PHY_MIPHY
> >-#define _DT_BINDINGS_PHY_MIPHY
> >-
> >-#define MIPHY_TYPE_SATA		1
> >-#define MIPHY_TYPE_PCIE		2
> >-#define MIPHY_TYPE_USB		3
> >-
> >-#endif /* _DT_BINDINGS_PHY_MIPHY */
> >

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Peter Griffin]

Hi Lee,

On Tue, 31 Mar 2015, Lee Jones wrote:
> On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
> 
> > Hi Patrice, Maxime,
> > 
> > On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
> > >Now there are generic phy type constants declared in phy.h, migrate over to
> > >using them rather than defining our own. This change has been done as one
> > >atomic commit to be bisectable.
> > >
> > >Note: The values of the defines are the same, so there is no ABI breakage
> > >with this patch.
> > >
> > >Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> > >Acked-by: Rob Herring <robh@kernel.org>
> > >Acked-by: Lee Jones <lee.jones@linaro.org>
> > 
> > Are you okay for this patch to go via PHY tree? It modifies arch/arm/boot/dts
> > /stih416.dtsi.
> 
> These files need to be changed simultaneously in order to prevent
> breakage during bisection and the like.

That is why it has been authored as one atomic commit. See commit message above.

regards,

Peter

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Lee Jones]

On Tue, 31 Mar 2015, Peter Griffin wrote:
> On Tue, 31 Mar 2015, Lee Jones wrote:
> > On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
> > 
> > > Hi Patrice, Maxime,
> > > 
> > > On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
> > > >Now there are generic phy type constants declared in phy.h, migrate over to
> > > >using them rather than defining our own. This change has been done as one
> > > >atomic commit to be bisectable.
> > > >
> > > >Note: The values of the defines are the same, so there is no ABI breakage
> > > >with this patch.
> > > >
> > > >Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> > > >Acked-by: Rob Herring <robh@kernel.org>
> > > >Acked-by: Lee Jones <lee.jones@linaro.org>
> > > 
> > > Are you okay for this patch to go via PHY tree? It modifies arch/arm/boot/dts
> > > /stih416.dtsi.
> > 
> > These files need to be changed simultaneously in order to prevent
> > breakage during bisection and the like.
> 
> That is why it has been authored as one atomic commit. See commit message above.

I already know you know why you did it.  The comment was for Kishon.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Kishon Vijay Abraham I]

Maxime,

On Tuesday 31 March 2015 01:10 PM, Lee Jones wrote:
> On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
>
>> Hi Patrice, Maxime,
>>
>> On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
>>> Now there are generic phy type constants declared in phy.h, migrate over to
>>> using them rather than defining our own. This change has been done as one
>>> atomic commit to be bisectable.
>>>
>>> Note: The values of the defines are the same, so there is no ABI breakage
>>> with this patch.
>>>
>>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
>>> Acked-by: Rob Herring <robh@kernel.org>
>>> Acked-by: Lee Jones <lee.jones@linaro.org>
>>
>> Are you okay for this patch to go via PHY tree? It modifies arch/arm/boot/dts
>> /stih416.dtsi.
>
> These files need to be changed simultaneously in order to prevent
> breakage during bisection and the like.  I think the best bet moving
> forward is to pull this into its own branch, tag it and send Maxime a
> pull-request to the immutable branch.  It's the best way to minimise
> merge conflicts during the v4.1 merge window.

okay. I still need an Ack from Maxime.

Thanks
Kishon

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Maxime Coquelin]

Hi Kishon,

On 03/31/2015 05:30 PM, Kishon Vijay Abraham I wrote:
> Maxime,
>
> On Tuesday 31 March 2015 01:10 PM, Lee Jones wrote:
>> On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
>>
>>> Hi Patrice, Maxime,
>>>
>>> On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
>>>> Now there are generic phy type constants declared in phy.h, migrate 
>>>> over to
>>>> using them rather than defining our own. This change has been done 
>>>> as one
>>>> atomic commit to be bisectable.
>>>>
>>>> Note: The values of the defines are the same, so there is no ABI 
>>>> breakage
>>>> with this patch.
>>>>
>>>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
>>>> Acked-by: Rob Herring <robh@kernel.org>
>>>> Acked-by: Lee Jones <lee.jones@linaro.org>
>>>
>>> Are you okay for this patch to go via PHY tree? It modifies 
>>> arch/arm/boot/dts
>>> /stih416.dtsi.
>>
>> These files need to be changed simultaneously in order to prevent
>> breakage during bisection and the like.  I think the best bet moving
>> forward is to pull this into its own branch, tag it and send Maxime a
>> pull-request to the immutable branch.  It's the best way to minimise
>> merge conflicts during the v4.1 merge window.
>
> okay. I still need an Ack from Maxime.

You have my Ack.

I haven't sent a pull request for STi DT files for v4.1 now, and it is 
too late to send one.
So creating an immutable tag is not even needed in my opinion, you can 
just take the DT patch.

Thanks,
Maxime

>
> Thanks
> Kishon

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Lee Jones]

On Tue, 31 Mar 2015, Maxime Coquelin wrote:

> Hi Kishon,
> On 03/31/2015 05:30 PM, Kishon Vijay Abraham I wrote:
> >Maxime,
> >
> >On Tuesday 31 March 2015 01:10 PM, Lee Jones wrote:
> >>On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
> >>
> >>>Hi Patrice, Maxime,
> >>>
> >>>On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
> >>>>Now there are generic phy type constants declared in phy.h,
> >>>>migrate over to
> >>>>using them rather than defining our own. This change has
> >>>>been done as one
> >>>>atomic commit to be bisectable.
> >>>>
> >>>>Note: The values of the defines are the same, so there is no
> >>>>ABI breakage
> >>>>with this patch.
> >>>>
> >>>>Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> >>>>Acked-by: Rob Herring <robh@kernel.org>
> >>>>Acked-by: Lee Jones <lee.jones@linaro.org>
> >>>
> >>>Are you okay for this patch to go via PHY tree? It modifies
> >>>arch/arm/boot/dts
> >>>/stih416.dtsi.
> >>
> >>These files need to be changed simultaneously in order to prevent
> >>breakage during bisection and the like.  I think the best bet moving
> >>forward is to pull this into its own branch, tag it and send Maxime a
> >>pull-request to the immutable branch.  It's the best way to minimise
> >>merge conflicts during the v4.1 merge window.
> >
> >okay. I still need an Ack from Maxime.
> 
> You have my Ack.
> 
> I haven't sent a pull request for STi DT files for v4.1 now, and it
> is too late to send one.
> So creating an immutable tag is not even needed in my opinion, you
> can just take the DT patch.

Kishon,

I saw that you took the MAINTAINERS patch, but not this one.  If it's
because you are still unsure about it, I agree with Maxime, you can
just take this patch without fear of conflict.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Kishon Vijay Abraham I]

Hi,

On Wednesday 01 April 2015 12:45 PM, Lee Jones wrote:
> On Tue, 31 Mar 2015, Maxime Coquelin wrote:
>
>> Hi Kishon,
>> On 03/31/2015 05:30 PM, Kishon Vijay Abraham I wrote:
>>> Maxime,
>>>
>>> On Tuesday 31 March 2015 01:10 PM, Lee Jones wrote:
>>>> On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
>>>>
>>>>> Hi Patrice, Maxime,
>>>>>
>>>>> On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
>>>>>> Now there are generic phy type constants declared in phy.h,
>>>>>> migrate over to
>>>>>> using them rather than defining our own. This change has
>>>>>> been done as one
>>>>>> atomic commit to be bisectable.
>>>>>>
>>>>>> Note: The values of the defines are the same, so there is no
>>>>>> ABI breakage
>>>>>> with this patch.
>>>>>>
>>>>>> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
>>>>>> Acked-by: Rob Herring <robh@kernel.org>
>>>>>> Acked-by: Lee Jones <lee.jones@linaro.org>
>>>>>
>>>>> Are you okay for this patch to go via PHY tree? It modifies
>>>>> arch/arm/boot/dts
>>>>> /stih416.dtsi.
>>>>
>>>> These files need to be changed simultaneously in order to prevent
>>>> breakage during bisection and the like.  I think the best bet moving
>>>> forward is to pull this into its own branch, tag it and send Maxime a
>>>> pull-request to the immutable branch.  It's the best way to minimise
>>>> merge conflicts during the v4.1 merge window.
>>>
>>> okay. I still need an Ack from Maxime.
>>
>> You have my Ack.
>>
>> I haven't sent a pull request for STi DT files for v4.1 now, and it
>> is too late to send one.
>> So creating an immutable tag is not even needed in my opinion, you
>> can just take the DT patch.
>
> Kishon,
>
> I saw that you took the MAINTAINERS patch, but not this one.  If it's
> because you are still unsure about it, I agree with Maxime, you can
> just take this patch without fear of conflict.

I've took this already
https://git.kernel.org/cgit/linux/kernel/git/kishon/linux-phy.git/commit/?h=next&id=76fa6deabab05688a1653c2f66224be4a3c08d6a

-Kishon

Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h

[Lee Jones]

On Wed, 01 Apr 2015, Kishon Vijay Abraham I wrote:

> Hi,
> 
> On Wednesday 01 April 2015 12:45 PM, Lee Jones wrote:
> >On Tue, 31 Mar 2015, Maxime Coquelin wrote:
> >
> >>Hi Kishon,
> >>On 03/31/2015 05:30 PM, Kishon Vijay Abraham I wrote:
> >>>Maxime,
> >>>
> >>>On Tuesday 31 March 2015 01:10 PM, Lee Jones wrote:
> >>>>On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
> >>>>
> >>>>>Hi Patrice, Maxime,
> >>>>>
> >>>>>On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
> >>>>>>Now there are generic phy type constants declared in phy.h,
> >>>>>>migrate over to
> >>>>>>using them rather than defining our own. This change has
> >>>>>>been done as one
> >>>>>>atomic commit to be bisectable.
> >>>>>>
> >>>>>>Note: The values of the defines are the same, so there is no
> >>>>>>ABI breakage
> >>>>>>with this patch.
> >>>>>>
> >>>>>>Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> >>>>>>Acked-by: Rob Herring <robh@kernel.org>
> >>>>>>Acked-by: Lee Jones <lee.jones@linaro.org>
> >>>>>
> >>>>>Are you okay for this patch to go via PHY tree? It modifies
> >>>>>arch/arm/boot/dts
> >>>>>/stih416.dtsi.
> >>>>
> >>>>These files need to be changed simultaneously in order to prevent
> >>>>breakage during bisection and the like.  I think the best bet moving
> >>>>forward is to pull this into its own branch, tag it and send Maxime a
> >>>>pull-request to the immutable branch.  It's the best way to minimise
> >>>>merge conflicts during the v4.1 merge window.
> >>>
> >>>okay. I still need an Ack from Maxime.
> >>
> >>You have my Ack.
> >>
> >>I haven't sent a pull request for STi DT files for v4.1 now, and it
> >>is too late to send one.
> >>So creating an immutable tag is not even needed in my opinion, you
> >>can just take the DT patch.
> >
> >Kishon,
> >
> >I saw that you took the MAINTAINERS patch, but not this one.  If it's
> >because you are still unsure about it, I agree with Maxime, you can
> >just take this patch without fear of conflict.
> 
> I've took this already
> https://git.kernel.org/cgit/linux/kernel/git/kishon/linux-phy.git/commit/?h=next&id=76fa6deabab05688a1653c2f66224be4a3c08d6a

I missed that.  Thanks for pointing it out.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH v2 2/6] ahci: st: Update the DT example for how to obtain the PHY.

[Peter Griffin]

The example is wrong in that the phys property should take a
phandle to the phy port.

Also with the changing over to generic PHY type constants we also
update that as well.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 Documentation/devicetree/bindings/ata/ahci-st.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
index 0574a77..1331202 100644
--- a/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
@@ -11,7 +11,7 @@ Required properties:
  - reset-names	   :   Associated names must be; "pwr-dwn" and "sw-rst"
  - clocks	   : The phandle for the clock
  - clock-names	   :   Associated name must be; "ahci_clk"
- - phys		   : The phandle for the PHY device
+ - phys		   : The phandle for the PHY port
  - phy-names	   :   Associated name must be; "ahci_phy"
 
 Example:
@@ -21,7 +21,7 @@ Example:
 		reg             = <0xfe380000 0x1000>;
 		interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
 		interrupt-names = "hostc";
-		phys	        = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
+		phys	        = <&phy_port0 PHY_TYPE_SATA>;
 		phy-names       = "ahci_phy";
 		resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
 				  <&softreset STIH416_SATA0_SOFTRESET>;
-- 
1.9.1

[PATCH v2 3/6] ARM: DT: STi: STiH407: Update picophyreset for the usb3 controllers usb2 phy

[Peter Griffin]

Ths picophyreset is incorrectly defined, which stops the usb2 phy being
taken out of reset.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c06a546..186412d 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -280,7 +280,7 @@
 			#phy-cells = <0>;
 			st,syscfg = <&syscfg_core 0x100 0xf4>;
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
+				 <&picophyreset STIH407_PICOPHY2_RESET>;
 			reset-names = "global", "port";
 		};
 
-- 
1.9.1

[PATCH v2 4/6] ARM: DT: STi: STiH407: Add dwc3 usb3 DT node.

[Peter Griffin]

Now that both usb2 and usb3 phy drivers, and also the ST dwc3 glue code
are all present upstream, we can add the dwc3 DT node and have a working
usb3 controller on stih407-b2120 and stih410-b2020.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 186412d..a57c06e 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -7,6 +7,7 @@
  * publishhed by the Free Software Foundation.
  */
 #include "stih407-pinctrl.dtsi"
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/reset-controller/stih407-resets.h>
 / {
 	#address-cells = <1>;
@@ -336,5 +337,29 @@
 				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 			};
 		};
+
+		st_dwc3: dwc3@8f94000 {
+			compatible	= "st,stih407-dwc3";
+			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names	= "reg-glue", "syscfg-reg";
+			st,syscfg	= <&syscfg_core>;
+			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
+					  <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names	= "powerdown", "softreset";
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_usb3>;
+			ranges;
+
+			dwc3: dwc3@9900000 {
+				compatible	= "snps,dwc3";
+				reg		= <0x09900000 0x100000>;
+				interrupts	= <GIC_SPI 155 IRQ_TYPE_NONE>;
+				dr_mode		= "host";
+				phy-names	= "usb2-phy", "usb3-phy";
+				phys		= <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>;
+			};
+		};
 	};
 };
-- 
1.9.1

[PATCH v2 5/6] usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.

[Peter Griffin]

There is a subtle typo phys-names should be phy-names. Using the
current example means you don't have working usb (as you fail to
obtain the phys). Also update the example to use the generic phy
type constants which are now used for miphy28.

Additionaly also remove the unnecessary new line in the example.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/usb/dwc3-st.txt | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index f9d7025..01c71b1 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -49,8 +49,7 @@ st_dwc3: dwc3@8f94000 {
 	st,syscfg	= <&syscfg_core>;
 	resets		= <&powerdown STIH407_USB3_POWERDOWN>,
 			  <&softreset STIH407_MIPHY2_SOFTRESET>;
-	reset-names	= "powerdown",
-			  "softreset";
+	reset-names	= "powerdown", "softreset";
 	#address-cells	= <1>;
 	#size-cells	= <1>;
 	pinctrl-names	= "default";
@@ -62,7 +61,7 @@ st_dwc3: dwc3@8f94000 {
 		reg		= <0x09900000 0x100000>;
 		interrupts	= <GIC_SPI 155 IRQ_TYPE_NONE>;
 		dr_mode		= "host";
-		phys-names      = "usb2-phy", "usb3-phy";
-		phys            = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>;
+		phy-names	= "usb2-phy", "usb3-phy";
+		phys		= <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>;
 	};
 };
-- 
1.9.1

[PATCH v2 6/6] MAINTAINERS: Add phy-miphy28lp.c to ARCH/STI architecture

[Peter Griffin]

This patch adds the phy-miphy28lp.c phy driver found on STMicroelectronics
stih407 family SoC's into the STI arch section of the maintainers file.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 1de6afa..fa1bb4f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1469,6 +1469,7 @@ F:	drivers/clocksource/arm_global_timer.c
 F:	drivers/i2c/busses/i2c-st.c
 F:	drivers/media/rc/st_rc.c
 F:	drivers/mmc/host/sdhci-st.c
+F:	drivers/phy/phy-miphy28lp.c
 F:	drivers/phy/phy-stih407-usb.c
 F:	drivers/phy/phy-stih41x-usb.c
 F:	drivers/pinctrl/pinctrl-st.c
-- 
1.9.1

Re: [PATCH v2 6/6] MAINTAINERS: Add phy-miphy28lp.c to ARCH/STI architecture

[Kishon Vijay Abraham I]

Hi,

On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
> This patch adds the phy-miphy28lp.c phy driver found on STMicroelectronics
> stih407 family SoC's into the STI arch section of the maintainers file.
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
>   MAINTAINERS | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1de6afa..fa1bb4f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1469,6 +1469,7 @@ F:	drivers/clocksource/arm_global_timer.c
>   F:	drivers/i2c/busses/i2c-st.c
>   F:	drivers/media/rc/st_rc.c
>   F:	drivers/mmc/host/sdhci-st.c
> +F:	drivers/phy/phy-miphy28lp.c

add for miphy365x.c as well?

-Kishon

Re: [PATCH v2 6/6] MAINTAINERS: Add phy-miphy28lp.c to ARCH/STI architecture

[Peter Griffin]

Hi Kishon,

On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
<snip>

> >diff --git a/MAINTAINERS b/MAINTAINERS
> >index 1de6afa..fa1bb4f 100644
> >--- a/MAINTAINERS
> >+++ b/MAINTAINERS
> >@@ -1469,6 +1469,7 @@ F:	drivers/clocksource/arm_global_timer.c
> >  F:	drivers/i2c/busses/i2c-st.c
> >  F:	drivers/media/rc/st_rc.c
> >  F:	drivers/mmc/host/sdhci-st.c
> >+F:	drivers/phy/phy-miphy28lp.c
> 
> add for miphy365x.c as well?

Yes we should also be adding miphy365x.c as well.

Would you like me to send a seperate patch for that?

regards,

Peter.

Re: [PATCH v2 6/6] MAINTAINERS: Add phy-miphy28lp.c to ARCH/STI architecture

[Kishon Vijay Abraham I]

Hi,

On Tuesday 31 March 2015 11:10 PM, Peter Griffin wrote:
> Hi Kishon,
>
> On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:
> <snip>
>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 1de6afa..fa1bb4f 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -1469,6 +1469,7 @@ F:	drivers/clocksource/arm_global_timer.c
>>>   F:	drivers/i2c/busses/i2c-st.c
>>>   F:	drivers/media/rc/st_rc.c
>>>   F:	drivers/mmc/host/sdhci-st.c
>>> +F:	drivers/phy/phy-miphy28lp.c
>>
>> add for miphy365x.c as well?
>
> Yes we should also be adding miphy365x.c as well.
>
> Would you like me to send a seperate patch for that?

you can send an update to this patch. Haven't merged this one yet.

Thanks
Kishon