* [PATCHv3 0/2] Adding driver for Xilinx LogiCORE IP mailbox.
@ 2015-05-28 21:52 Moritz Fischer
2015-05-28 21:52 ` [PATCHv3 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver Moritz Fischer
2015-05-28 21:52 ` [PATCHv3 2/2] mailbox: Adding driver for Xilinx LogiCORE IP mailbox Moritz Fischer
0 siblings, 2 replies; 5+ messages in thread
From: Moritz Fischer @ 2015-05-28 21:52 UTC (permalink / raw)
To: jassisinghbrar
Cc: linux-kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, michal.simek, soren.brinkmann, akpm, gregkh, mchehab,
arnd, joe, jingoohan1, devicetree, linux-arm-kernel,
Moritz Fischer
This patchset adds mailbox framework integration for the Xilinx LogiCORE IP
mailbox. The Xilinx LogiCORE IP mailbox is a fpga softcore that allows
interprocessor communication between AXI4 stream / memory mapped
processors.
Changes from v1:
- Fixed error condition for IRQ from >= 0 to > 0
- Fixed clock enable
- Cleaned up docs
Changes from v1:
- Added common clock framework support
- Deal with IRQs that happend before driver load,
since HW will not let us know about them when we enable IRQs
Changes from v0:
- Several stylistic issues
- Dropped superfluous intr_mode member
- Really masking the IRQs on mailbox_shutdown
- No longer using polling by accident in non-IRQ mode
- Swapped doc and driver commits
Moritz Fischer (2):
dts: Adding docs for Xilinx LogiCORE IP mailbox driver.
mailbox: Adding driver for Xilinx LogiCORE IP mailbox.
.../bindings/mailbox/xilinx-mailbox.txt | 44 +++
MAINTAINERS | 7 +
drivers/mailbox/Kconfig | 8 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mailbox-xilinx.c | 353 +++++++++++++++++++
5 files changed, 414 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
create mode 100644 drivers/mailbox/mailbox-xilinx.c
--
2.4.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCHv3 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver.
2015-05-28 21:52 [PATCHv3 0/2] Adding driver for Xilinx LogiCORE IP mailbox Moritz Fischer
@ 2015-05-28 21:52 ` Moritz Fischer
2015-05-29 5:55 ` Michal Simek
2015-05-28 21:52 ` [PATCHv3 2/2] mailbox: Adding driver for Xilinx LogiCORE IP mailbox Moritz Fischer
1 sibling, 1 reply; 5+ messages in thread
From: Moritz Fischer @ 2015-05-28 21:52 UTC (permalink / raw)
To: jassisinghbrar
Cc: linux-kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, michal.simek, soren.brinkmann, akpm, gregkh, mchehab,
arnd, joe, jingoohan1, devicetree, linux-arm-kernel,
Moritz Fischer
Changes from v2:
- Addressed Michal's stylistic comments
- Fixed typo in compatible string
Changes from v1:
- Added common clock framework support
Changes from v0:
- Fixed example bindings
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
---
.../bindings/mailbox/xilinx-mailbox.txt | 44 ++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
new file mode 100644
index 0000000..ca76efd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
@@ -0,0 +1,44 @@
+Xilinx Mailbox Driver
+=====================
+
+Required properties:
+- compatible : "xlnx,mailbox-2.1".
+- reg : physical base address of the mailbox and length of
+ memory mapped region.
+- #mbox-cells : common mailbox binding property to identify the number
+ of cells required for the mailbox specifier, should be 1
+- clocks : phandle to clock provider
+- clock-names : must be 'mbox'
+
+Optional properties:
+- interrupt-parent : interrupt source phandle
+- interrupts : interrupt number, The interrupt specifier format
+ depends on the interrupt controller parent.
+
+Example:
+ mbox: mailbox@40400000 {
+ compatible = "xlnx,mailbox-2.1";
+ reg = <0x40400000 0x3c>;
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+ #mbox-cells = <1>;
+ clocks = <&clkc 15>;
+ clock-names = "mbox";
+ };
+
+Mailbox client
+===============
+"mboxes" and the optional "mbox-names" (please see
+Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value
+of the mboxes property should contain a phandle to the mailbox controller
+device node and second argument is the channel index. It must be 0 (hardware
+support only one channel). The equivalent "mbox-names" property value can be
+used to give a name to the communication channel to be used by the client user.
+
+Example:
+ mclient0: mclient0@400 {
+ compatible = "client-1.0";
+ reg = <0x400 0x10>;
+ mbox-names = "mbox";
+ mboxes = <&mbox 0>;
+ };
--
2.4.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCHv3 2/2] mailbox: Adding driver for Xilinx LogiCORE IP mailbox.
2015-05-28 21:52 [PATCHv3 0/2] Adding driver for Xilinx LogiCORE IP mailbox Moritz Fischer
2015-05-28 21:52 ` [PATCHv3 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver Moritz Fischer
@ 2015-05-28 21:52 ` Moritz Fischer
2015-05-29 5:57 ` Michal Simek
1 sibling, 1 reply; 5+ messages in thread
From: Moritz Fischer @ 2015-05-28 21:52 UTC (permalink / raw)
To: jassisinghbrar
Cc: linux-kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, michal.simek, soren.brinkmann, akpm, gregkh, mchehab,
arnd, joe, jingoohan1, devicetree, linux-arm-kernel,
Moritz Fischer
The Xilinx LogiCORE IP mailbox is a FPGA core that allows for
interprocessor communication via AXI4 memory mapped / AXI4 stream
interfaces.
It is single channel per core and allows for transmit and receive.
Changes from v2:
- Fixed error handling for IRQ from >= 0 to > 0
- Fixed error handling for clock enabling
- Addressed Michal's stylistic comments
Changes from v1:
- Added common clock framework support
- Deal with IRQs that happend before driver load,
since HW will not let us know about them when we enable IRQs
Changes from v0:
- Several stylistic issues
- Dropped superfluous intr_mode member
- Really masking the IRQs on mailbox_shutdown
- No longer using polling by accident in non-IRQ mode
- Swapped doc and driver commits
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
---
MAINTAINERS | 7 +
drivers/mailbox/Kconfig | 8 +
drivers/mailbox/Makefile | 2 +
drivers/mailbox/mailbox-xilinx.c | 353 ++++++++++++++++++++++++++++++++++
4 files changed, 370 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index f8e0afb..f1f0d10 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10986,6 +10986,13 @@ M: John Linn <John.Linn@xilinx.com>
S: Maintained
F: drivers/net/ethernet/xilinx/xilinx_axienet*
+XILINX MAILBOX DRIVER
+M: Moritz Fischer <moritz.fischer@ettus.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/mailbox/mailbox-xilinx.c
+F: Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
+
XILINX UARTLITE SERIAL DRIVER
M: Peter Korsgaard <jacmet@sunsite.dk>
L: linux-serial@vger.kernel.org
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 84b0a2d..e11e4b2 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -60,4 +60,12 @@ config ALTERA_MBOX
An implementation of the Altera Mailbox soft core. It is used
to send message between processors. Say Y here if you want to use the
Altera mailbox support.
+
+config XILINX_MBOX
+ tristate "Xilinx Mailbox"
+ help
+ An implementation of the Xilinx Mailbox soft core. It is used
+ to send message between processors. Say Y here if you want to use the
+ Xilinx mailbox support.
+
endif
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index b18201e..d28a028 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -11,3 +11,5 @@ obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mailbox.o
obj-$(CONFIG_PCC) += pcc.o
obj-$(CONFIG_ALTERA_MBOX) += mailbox-altera.o
+
+obj-$(CONFIG_XILINX_MBOX) += mailbox-xilinx.o
diff --git a/drivers/mailbox/mailbox-xilinx.c b/drivers/mailbox/mailbox-xilinx.c
new file mode 100644
index 0000000..680d2f9
--- /dev/null
+++ b/drivers/mailbox/mailbox-xilinx.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright (c) 2015, National Instruments Corp. All rights reserved.
+ *
+ * Driver for the Xilinx LogiCORE mailbox IP block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME "xilinx-mailbox"
+
+/* register offsets */
+#define MAILBOX_REG_WRDATA 0x00
+#define MAILBOX_REG_RDDATA 0x08
+#define MAILBOX_REG_STATUS 0x10
+#define MAILBOX_REG_ERROR 0x14
+#define MAILBOX_REG_SIT 0x18
+#define MAILBOX_REG_RIT 0x1c
+#define MAILBOX_REG_IS 0x20
+#define MAILBOX_REG_IE 0x24
+#define MAILBOX_REG_IP 0x28
+
+/* status register */
+#define STS_RTA BIT(3)
+#define STS_STA BIT(2)
+#define STS_FULL BIT(1)
+#define STS_EMPTY BIT(0)
+
+/* error register */
+#define ERR_FULL BIT(1)
+#define ERR_EMPTY BIT(0)
+
+/* mailbox interrupt status register */
+#define INT_STATUS_ERR BIT(2)
+#define INT_STATUS_RTI BIT(1)
+#define INT_STATUS_STI BIT(0)
+
+/* mailbox interrupt enable register */
+#define INT_ENABLE_ERR BIT(2)
+#define INT_ENABLE_RTI BIT(1)
+#define INT_ENABLE_STI BIT(0)
+
+#define MBOX_POLLING_MS 5 /* polling interval 5ms */
+
+struct xilinx_mbox {
+ int irq;
+ void __iomem *mbox_base;
+ struct clk *clk;
+ struct device *dev;
+ struct mbox_controller controller;
+
+ /* if the controller supports only RX polling mode */
+ struct timer_list rxpoll_timer;
+};
+
+static struct xilinx_mbox *mbox_chan_to_xilinx_mbox(struct mbox_chan *chan)
+{
+ if (!chan || !chan->con_priv)
+ return NULL;
+
+ return (struct xilinx_mbox *)chan->con_priv;
+}
+
+static inline bool xilinx_mbox_full(struct xilinx_mbox *mbox)
+{
+ u32 status;
+
+ status = readl_relaxed(mbox->mbox_base + MAILBOX_REG_STATUS);
+
+ return status & STS_FULL;
+}
+
+static inline bool xilinx_mbox_pending(struct xilinx_mbox *mbox)
+{
+ u32 status;
+
+ status = readl_relaxed(mbox->mbox_base + MAILBOX_REG_STATUS);
+
+ return !(status & STS_EMPTY);
+}
+
+static void xilinx_mbox_intmask(struct xilinx_mbox *mbox, u32 mask, bool enable)
+{
+ u32 mask_reg;
+
+ mask_reg = readl_relaxed(mbox->mbox_base + MAILBOX_REG_IE);
+ if (enable)
+ mask_reg |= mask;
+ else
+ mask_reg &= ~mask;
+
+ writel_relaxed(mask_reg, mbox->mbox_base + MAILBOX_REG_IE);
+}
+
+
+static inline void xilinx_mbox_rx_intmask(struct xilinx_mbox *mbox, bool enable)
+{
+ xilinx_mbox_intmask(mbox, INT_ENABLE_RTI, enable);
+}
+
+static inline void xilinx_mbox_tx_intmask(struct xilinx_mbox *mbox, bool enable)
+{
+ xilinx_mbox_intmask(mbox, INT_ENABLE_STI, enable);
+}
+
+static void xilinx_mbox_rx_data(struct mbox_chan *chan)
+{
+ struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
+ u32 data;
+
+ if (xilinx_mbox_pending(mbox)) {
+ data = readl_relaxed(mbox->mbox_base + MAILBOX_REG_RDDATA);
+ mbox_chan_received_data(chan, (void *)data);
+ }
+}
+
+static void xilinx_mbox_poll_rx(unsigned long data)
+{
+ struct mbox_chan *chan = (struct mbox_chan *)data;
+ struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
+
+ xilinx_mbox_rx_data(chan);
+
+ mod_timer(&mbox->rxpoll_timer,
+ jiffies + msecs_to_jiffies(MBOX_POLLING_MS));
+}
+
+static irqreturn_t xilinx_mbox_interrupt(int irq, void *p)
+{
+ u32 mask;
+ struct mbox_chan *chan = (struct mbox_chan *)p;
+ struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
+
+ mask = readl_relaxed(mbox->mbox_base + MAILBOX_REG_IS);
+ if (mask & INT_STATUS_RTI)
+ xilinx_mbox_rx_data(chan);
+
+ /* mask irqs *before* notifying done, require tx_block=true */
+ if (mask & INT_STATUS_STI) {
+ xilinx_mbox_tx_intmask(mbox, false);
+ mbox_chan_txdone(chan, 0);
+ }
+
+ writel_relaxed(mask, mbox->mbox_base + MAILBOX_REG_IS);
+
+ return IRQ_HANDLED;
+}
+
+static int xilinx_mbox_startup(struct mbox_chan *chan)
+{
+ int ret;
+ struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
+
+ if (mbox->irq > 0) {
+ ret = request_irq(mbox->irq, xilinx_mbox_interrupt, 0,
+ dev_name(mbox->dev), chan);
+ if (unlikely(ret)) {
+ dev_err(mbox->dev,
+ "failed to register mailbox interrupt:%d\n",
+ ret);
+ return ret;
+ }
+
+ xilinx_mbox_rx_intmask(mbox, true);
+
+ /* if fifo was full already, we didn't get an interrupt */
+ while (xilinx_mbox_pending(mbox))
+ xilinx_mbox_rx_data(chan);
+
+ return 0;
+ }
+
+ /* setup polling timer */
+ setup_timer(&mbox->rxpoll_timer, xilinx_mbox_poll_rx,
+ (unsigned long)chan);
+ mod_timer(&mbox->rxpoll_timer,
+ jiffies + msecs_to_jiffies(MBOX_POLLING_MS));
+
+ return 0;
+}
+
+static int xilinx_mbox_send_data(struct mbox_chan *chan, void *data)
+{
+ struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
+ u32 *udata = (u32 *)data;
+
+ if (!mbox || !data)
+ return -EINVAL;
+
+ if (xilinx_mbox_full(mbox))
+ return -EBUSY;
+
+ /* enable interrupt before send */
+ if (mbox->irq >= 0)
+ xilinx_mbox_tx_intmask(mbox, true);
+
+ writel_relaxed(*udata, mbox->mbox_base + MAILBOX_REG_WRDATA);
+
+ return 0;
+}
+
+static bool xilinx_mbox_last_tx_done(struct mbox_chan *chan)
+{
+ struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
+
+ /* return false if mailbox is full */
+ return !xilinx_mbox_full(mbox);
+}
+
+static bool xilinx_mbox_peek_data(struct mbox_chan *chan)
+{
+ struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
+
+ return xilinx_mbox_pending(mbox);
+}
+
+static void xilinx_mbox_shutdown(struct mbox_chan *chan)
+{
+ struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
+
+ if (mbox->irq > 0) {
+ /* mask all interrupts */
+ writel_relaxed(0, mbox->mbox_base + MAILBOX_REG_IE);
+ free_irq(mbox->irq, chan);
+ } else {
+ del_timer_sync(&mbox->rxpoll_timer);
+ }
+}
+
+static struct mbox_chan_ops xilinx_mbox_ops = {
+ .send_data = xilinx_mbox_send_data,
+ .startup = xilinx_mbox_startup,
+ .shutdown = xilinx_mbox_shutdown,
+ .last_tx_done = xilinx_mbox_last_tx_done,
+ .peek_data = xilinx_mbox_peek_data,
+};
+
+static int xilinx_mbox_probe(struct platform_device *pdev)
+{
+ struct xilinx_mbox *mbox;
+ struct resource *regs;
+ struct mbox_chan *chans;
+ int ret;
+
+ mbox = devm_kzalloc(&pdev->dev, sizeof(*mbox), GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ /* get clk and enable */
+ mbox->clk = devm_clk_get(&pdev->dev, "mbox");
+ if (IS_ERR(mbox->clk)) {
+ dev_err(&pdev->dev, "Couldn't get clk.\n");
+ return PTR_ERR(mbox->clk);
+ }
+
+ /* allocated one channel */
+ chans = devm_kzalloc(&pdev->dev, sizeof(*chans), GFP_KERNEL);
+ if (!chans)
+ return -ENOMEM;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ mbox->mbox_base = devm_ioremap_resource(&pdev->dev, regs);
+ if (IS_ERR(mbox->mbox_base))
+ return PTR_ERR(mbox->mbox_base);
+
+ mbox->irq = platform_get_irq(pdev, 0);
+ /* if irq is present, we can use it, otherwise, poll */
+ if (mbox->irq > 0) {
+ mbox->controller.txdone_irq = true;
+ } else {
+ dev_info(&pdev->dev, "IRQ not found, fallback to polling.\n");
+ mbox->controller.txdone_poll = true;
+ mbox->controller.txpoll_period = MBOX_POLLING_MS;
+ }
+
+ mbox->dev = &pdev->dev;
+
+ /* hardware supports only one channel. */
+ chans[0].con_priv = mbox;
+ mbox->controller.dev = mbox->dev;
+ mbox->controller.num_chans = 1;
+ mbox->controller.chans = chans;
+ mbox->controller.ops = &xilinx_mbox_ops;
+
+
+ /* prep and enable the clock */
+ clk_prepare_enable(mbox->clk);
+
+ ret = mbox_controller_register(&mbox->controller);
+ if (ret) {
+ dev_err(&pdev->dev, "Register mailbox failed\n");
+ clk_disable_unprepare(mbox->clk);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, mbox);
+
+ return 0;
+}
+
+static int xilinx_mbox_remove(struct platform_device *pdev)
+{
+ struct xilinx_mbox *mbox = platform_get_drvdata(pdev);
+
+ if (!mbox)
+ return -EINVAL;
+
+ mbox_controller_unregister(&mbox->controller);
+
+ clk_disable_unprepare(mbox->clk);
+
+ return 0;
+}
+
+static const struct of_device_id xilinx_mbox_match[] = {
+ { .compatible = "xlnx,mailbox-2.1" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, xilinx_mbox_match);
+
+static struct platform_driver xilinx_mbox_driver = {
+ .probe = xilinx_mbox_probe,
+ .remove = xilinx_mbox_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = xilinx_mbox_match,
+ },
+};
+
+module_platform_driver(xilinx_mbox_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Xilinx mailbox specific functions");
+MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
+MODULE_ALIAS("platform:xilinx-mailbox");
--
2.4.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCHv3 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver.
2015-05-28 21:52 ` [PATCHv3 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver Moritz Fischer
@ 2015-05-29 5:55 ` Michal Simek
0 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2015-05-29 5:55 UTC (permalink / raw)
To: Moritz Fischer, jassisinghbrar
Cc: linux-kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, michal.simek, soren.brinkmann, akpm, gregkh, mchehab,
arnd, joe, jingoohan1, devicetree, linux-arm-kernel
On 05/28/2015 11:52 PM, Moritz Fischer wrote:
> Changes from v2:
> - Addressed Michal's stylistic comments
> - Fixed typo in compatible string
>
> Changes from v1:
> - Added common clock framework support
>
> Changes from v0:
> - Fixed example bindings
>
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> ---
> .../bindings/mailbox/xilinx-mailbox.txt | 44 ++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
> new file mode 100644
> index 0000000..ca76efd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
> @@ -0,0 +1,44 @@
> +Xilinx Mailbox Driver
> +=====================
> +
> +Required properties:
> +- compatible : "xlnx,mailbox-2.1".
> +- reg : physical base address of the mailbox and length of
> + memory mapped region.
> +- #mbox-cells : common mailbox binding property to identify the number
> + of cells required for the mailbox specifier, should be 1
> +- clocks : phandle to clock provider
> +- clock-names : must be 'mbox'
> +
> +Optional properties:
> +- interrupt-parent : interrupt source phandle
> +- interrupts : interrupt number, The interrupt specifier format
> + depends on the interrupt controller parent.
> +
> +Example:
> + mbox: mailbox@40400000 {
> + compatible = "xlnx,mailbox-2.1";
> + reg = <0x40400000 0x3c>;
> + interrupt-parent = <&intc>;
> + interrupts = <5>;
> + #mbox-cells = <1>;
> + clocks = <&clkc 15>;
> + clock-names = "mbox";
> + };
> +
> +Mailbox client
> +===============
> +"mboxes" and the optional "mbox-names" (please see
> +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value
> +of the mboxes property should contain a phandle to the mailbox controller
> +device node and second argument is the channel index. It must be 0 (hardware
> +support only one channel). The equivalent "mbox-names" property value can be
> +used to give a name to the communication channel to be used by the client user.
> +
> +Example:
> + mclient0: mclient0@400 {
> + compatible = "client-1.0";
> + reg = <0x400 0x10>;
> + mbox-names = "mbox";
> + mboxes = <&mbox 0>;
> + };
>
I see you still keep there 0x3c but that's minor detail.
Acked-by: Michal Simek <michal.simek@xilinx.com>
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCHv3 2/2] mailbox: Adding driver for Xilinx LogiCORE IP mailbox.
2015-05-28 21:52 ` [PATCHv3 2/2] mailbox: Adding driver for Xilinx LogiCORE IP mailbox Moritz Fischer
@ 2015-05-29 5:57 ` Michal Simek
0 siblings, 0 replies; 5+ messages in thread
From: Michal Simek @ 2015-05-29 5:57 UTC (permalink / raw)
To: Moritz Fischer, jassisinghbrar
Cc: linux-kernel, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, michal.simek, soren.brinkmann, akpm, gregkh, mchehab,
arnd, joe, jingoohan1, devicetree, linux-arm-kernel
On 05/28/2015 11:52 PM, Moritz Fischer wrote:
> The Xilinx LogiCORE IP mailbox is a FPGA core that allows for
> interprocessor communication via AXI4 memory mapped / AXI4 stream
> interfaces.
>
> It is single channel per core and allows for transmit and receive.
>
> Changes from v2:
> - Fixed error handling for IRQ from >= 0 to > 0
> - Fixed error handling for clock enabling
> - Addressed Michal's stylistic comments
>
> Changes from v1:
> - Added common clock framework support
> - Deal with IRQs that happend before driver load,
> since HW will not let us know about them when we enable IRQs
>
> Changes from v0:
> - Several stylistic issues
> - Dropped superfluous intr_mode member
> - Really masking the IRQs on mailbox_shutdown
> - No longer using polling by accident in non-IRQ mode
> - Swapped doc and driver commits
>
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> ---
> MAINTAINERS | 7 +
> drivers/mailbox/Kconfig | 8 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/mailbox-xilinx.c | 353 ++++++++++++++++++++++++++++++++++
> 4 files changed, 370 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f8e0afb..f1f0d10 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10986,6 +10986,13 @@ M: John Linn <John.Linn@xilinx.com>
> S: Maintained
> F: drivers/net/ethernet/xilinx/xilinx_axienet*
>
> +XILINX MAILBOX DRIVER
> +M: Moritz Fischer <moritz.fischer@ettus.com>
> +L: linux-kernel@vger.kernel.org
> +S: Maintained
> +F: drivers/mailbox/mailbox-xilinx.c
> +F: Documentation/devicetree/bindings/mailbox/xilinx-mailbox.txt
> +
> XILINX UARTLITE SERIAL DRIVER
> M: Peter Korsgaard <jacmet@sunsite.dk>
> L: linux-serial@vger.kernel.org
> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> index 84b0a2d..e11e4b2 100644
> --- a/drivers/mailbox/Kconfig
> +++ b/drivers/mailbox/Kconfig
> @@ -60,4 +60,12 @@ config ALTERA_MBOX
> An implementation of the Altera Mailbox soft core. It is used
> to send message between processors. Say Y here if you want to use the
> Altera mailbox support.
> +
> +config XILINX_MBOX
> + tristate "Xilinx Mailbox"
> + help
> + An implementation of the Xilinx Mailbox soft core. It is used
> + to send message between processors. Say Y here if you want to use the
> + Xilinx mailbox support.
> +
> endif
> diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> index b18201e..d28a028 100644
> --- a/drivers/mailbox/Makefile
> +++ b/drivers/mailbox/Makefile
> @@ -11,3 +11,5 @@ obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mailbox.o
> obj-$(CONFIG_PCC) += pcc.o
>
> obj-$(CONFIG_ALTERA_MBOX) += mailbox-altera.o
> +
> +obj-$(CONFIG_XILINX_MBOX) += mailbox-xilinx.o
> diff --git a/drivers/mailbox/mailbox-xilinx.c b/drivers/mailbox/mailbox-xilinx.c
> new file mode 100644
> index 0000000..680d2f9
> --- /dev/null
> +++ b/drivers/mailbox/mailbox-xilinx.c
> @@ -0,0 +1,353 @@
> +/*
> + * Copyright (c) 2015, National Instruments Corp. All rights reserved.
> + *
> + * Driver for the Xilinx LogiCORE mailbox IP block
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mailbox_controller.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#define DRIVER_NAME "xilinx-mailbox"
> +
> +/* register offsets */
> +#define MAILBOX_REG_WRDATA 0x00
> +#define MAILBOX_REG_RDDATA 0x08
> +#define MAILBOX_REG_STATUS 0x10
> +#define MAILBOX_REG_ERROR 0x14
> +#define MAILBOX_REG_SIT 0x18
> +#define MAILBOX_REG_RIT 0x1c
> +#define MAILBOX_REG_IS 0x20
> +#define MAILBOX_REG_IE 0x24
> +#define MAILBOX_REG_IP 0x28
> +
> +/* status register */
> +#define STS_RTA BIT(3)
> +#define STS_STA BIT(2)
> +#define STS_FULL BIT(1)
> +#define STS_EMPTY BIT(0)
> +
> +/* error register */
> +#define ERR_FULL BIT(1)
> +#define ERR_EMPTY BIT(0)
> +
> +/* mailbox interrupt status register */
> +#define INT_STATUS_ERR BIT(2)
> +#define INT_STATUS_RTI BIT(1)
> +#define INT_STATUS_STI BIT(0)
> +
> +/* mailbox interrupt enable register */
> +#define INT_ENABLE_ERR BIT(2)
> +#define INT_ENABLE_RTI BIT(1)
> +#define INT_ENABLE_STI BIT(0)
> +
> +#define MBOX_POLLING_MS 5 /* polling interval 5ms */
> +
> +struct xilinx_mbox {
> + int irq;
> + void __iomem *mbox_base;
> + struct clk *clk;
> + struct device *dev;
> + struct mbox_controller controller;
> +
> + /* if the controller supports only RX polling mode */
> + struct timer_list rxpoll_timer;
> +};
> +
> +static struct xilinx_mbox *mbox_chan_to_xilinx_mbox(struct mbox_chan *chan)
> +{
> + if (!chan || !chan->con_priv)
> + return NULL;
> +
> + return (struct xilinx_mbox *)chan->con_priv;
> +}
> +
> +static inline bool xilinx_mbox_full(struct xilinx_mbox *mbox)
> +{
> + u32 status;
> +
> + status = readl_relaxed(mbox->mbox_base + MAILBOX_REG_STATUS);
> +
> + return status & STS_FULL;
> +}
> +
> +static inline bool xilinx_mbox_pending(struct xilinx_mbox *mbox)
> +{
> + u32 status;
> +
> + status = readl_relaxed(mbox->mbox_base + MAILBOX_REG_STATUS);
> +
> + return !(status & STS_EMPTY);
> +}
> +
> +static void xilinx_mbox_intmask(struct xilinx_mbox *mbox, u32 mask, bool enable)
> +{
> + u32 mask_reg;
> +
> + mask_reg = readl_relaxed(mbox->mbox_base + MAILBOX_REG_IE);
> + if (enable)
> + mask_reg |= mask;
> + else
> + mask_reg &= ~mask;
> +
> + writel_relaxed(mask_reg, mbox->mbox_base + MAILBOX_REG_IE);
> +}
> +
> +
> +static inline void xilinx_mbox_rx_intmask(struct xilinx_mbox *mbox, bool enable)
> +{
> + xilinx_mbox_intmask(mbox, INT_ENABLE_RTI, enable);
> +}
> +
> +static inline void xilinx_mbox_tx_intmask(struct xilinx_mbox *mbox, bool enable)
> +{
> + xilinx_mbox_intmask(mbox, INT_ENABLE_STI, enable);
> +}
> +
> +static void xilinx_mbox_rx_data(struct mbox_chan *chan)
> +{
> + struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
> + u32 data;
> +
> + if (xilinx_mbox_pending(mbox)) {
> + data = readl_relaxed(mbox->mbox_base + MAILBOX_REG_RDDATA);
> + mbox_chan_received_data(chan, (void *)data);
> + }
> +}
> +
> +static void xilinx_mbox_poll_rx(unsigned long data)
> +{
> + struct mbox_chan *chan = (struct mbox_chan *)data;
> + struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
> +
> + xilinx_mbox_rx_data(chan);
> +
> + mod_timer(&mbox->rxpoll_timer,
> + jiffies + msecs_to_jiffies(MBOX_POLLING_MS));
> +}
> +
> +static irqreturn_t xilinx_mbox_interrupt(int irq, void *p)
> +{
> + u32 mask;
> + struct mbox_chan *chan = (struct mbox_chan *)p;
> + struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
> +
> + mask = readl_relaxed(mbox->mbox_base + MAILBOX_REG_IS);
> + if (mask & INT_STATUS_RTI)
> + xilinx_mbox_rx_data(chan);
> +
> + /* mask irqs *before* notifying done, require tx_block=true */
> + if (mask & INT_STATUS_STI) {
> + xilinx_mbox_tx_intmask(mbox, false);
> + mbox_chan_txdone(chan, 0);
> + }
> +
> + writel_relaxed(mask, mbox->mbox_base + MAILBOX_REG_IS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int xilinx_mbox_startup(struct mbox_chan *chan)
> +{
> + int ret;
> + struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
> +
> + if (mbox->irq > 0) {
> + ret = request_irq(mbox->irq, xilinx_mbox_interrupt, 0,
> + dev_name(mbox->dev), chan);
> + if (unlikely(ret)) {
> + dev_err(mbox->dev,
> + "failed to register mailbox interrupt:%d\n",
> + ret);
> + return ret;
> + }
> +
> + xilinx_mbox_rx_intmask(mbox, true);
> +
> + /* if fifo was full already, we didn't get an interrupt */
> + while (xilinx_mbox_pending(mbox))
> + xilinx_mbox_rx_data(chan);
> +
> + return 0;
> + }
> +
> + /* setup polling timer */
> + setup_timer(&mbox->rxpoll_timer, xilinx_mbox_poll_rx,
> + (unsigned long)chan);
> + mod_timer(&mbox->rxpoll_timer,
> + jiffies + msecs_to_jiffies(MBOX_POLLING_MS));
> +
> + return 0;
> +}
> +
> +static int xilinx_mbox_send_data(struct mbox_chan *chan, void *data)
> +{
> + struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
> + u32 *udata = (u32 *)data;
> +
> + if (!mbox || !data)
> + return -EINVAL;
> +
> + if (xilinx_mbox_full(mbox))
> + return -EBUSY;
> +
> + /* enable interrupt before send */
> + if (mbox->irq >= 0)
> + xilinx_mbox_tx_intmask(mbox, true);
> +
> + writel_relaxed(*udata, mbox->mbox_base + MAILBOX_REG_WRDATA);
> +
> + return 0;
> +}
> +
> +static bool xilinx_mbox_last_tx_done(struct mbox_chan *chan)
> +{
> + struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
> +
> + /* return false if mailbox is full */
> + return !xilinx_mbox_full(mbox);
> +}
> +
> +static bool xilinx_mbox_peek_data(struct mbox_chan *chan)
> +{
> + struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
> +
> + return xilinx_mbox_pending(mbox);
> +}
> +
> +static void xilinx_mbox_shutdown(struct mbox_chan *chan)
> +{
> + struct xilinx_mbox *mbox = mbox_chan_to_xilinx_mbox(chan);
> +
> + if (mbox->irq > 0) {
> + /* mask all interrupts */
> + writel_relaxed(0, mbox->mbox_base + MAILBOX_REG_IE);
> + free_irq(mbox->irq, chan);
> + } else {
> + del_timer_sync(&mbox->rxpoll_timer);
> + }
> +}
> +
> +static struct mbox_chan_ops xilinx_mbox_ops = {
> + .send_data = xilinx_mbox_send_data,
> + .startup = xilinx_mbox_startup,
> + .shutdown = xilinx_mbox_shutdown,
> + .last_tx_done = xilinx_mbox_last_tx_done,
> + .peek_data = xilinx_mbox_peek_data,
> +};
> +
> +static int xilinx_mbox_probe(struct platform_device *pdev)
> +{
> + struct xilinx_mbox *mbox;
> + struct resource *regs;
> + struct mbox_chan *chans;
> + int ret;
> +
> + mbox = devm_kzalloc(&pdev->dev, sizeof(*mbox), GFP_KERNEL);
> + if (!mbox)
> + return -ENOMEM;
> +
> + /* get clk and enable */
> + mbox->clk = devm_clk_get(&pdev->dev, "mbox");
> + if (IS_ERR(mbox->clk)) {
> + dev_err(&pdev->dev, "Couldn't get clk.\n");
> + return PTR_ERR(mbox->clk);
> + }
> +
> + /* allocated one channel */
> + chans = devm_kzalloc(&pdev->dev, sizeof(*chans), GFP_KERNEL);
> + if (!chans)
> + return -ENOMEM;
> +
> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + mbox->mbox_base = devm_ioremap_resource(&pdev->dev, regs);
> + if (IS_ERR(mbox->mbox_base))
> + return PTR_ERR(mbox->mbox_base);
> +
> + mbox->irq = platform_get_irq(pdev, 0);
> + /* if irq is present, we can use it, otherwise, poll */
> + if (mbox->irq > 0) {
> + mbox->controller.txdone_irq = true;
> + } else {
> + dev_info(&pdev->dev, "IRQ not found, fallback to polling.\n");
> + mbox->controller.txdone_poll = true;
> + mbox->controller.txpoll_period = MBOX_POLLING_MS;
> + }
> +
> + mbox->dev = &pdev->dev;
> +
> + /* hardware supports only one channel. */
> + chans[0].con_priv = mbox;
> + mbox->controller.dev = mbox->dev;
> + mbox->controller.num_chans = 1;
> + mbox->controller.chans = chans;
> + mbox->controller.ops = &xilinx_mbox_ops;
> +
> +
only one empty line here but otherwise
Acked-by: Michal Simek <michal.simek@xilinx.com>
Thanks,
Michal
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-05-29 5:57 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-28 21:52 [PATCHv3 0/2] Adding driver for Xilinx LogiCORE IP mailbox Moritz Fischer
2015-05-28 21:52 ` [PATCHv3 1/2] dts: Adding docs for Xilinx LogiCORE IP mailbox driver Moritz Fischer
2015-05-29 5:55 ` Michal Simek
2015-05-28 21:52 ` [PATCHv3 2/2] mailbox: Adding driver for Xilinx LogiCORE IP mailbox Moritz Fischer
2015-05-29 5:57 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).