* [PATCH v2 0/8] Add Analogix Core Display Port Driver
@ 2015-08-07 10:34 Yakir Yang
2015-08-07 10:37 ` [PATCH v2 1/8] drm: exynos/dp: fix code style Yakir Yang
` (7 more replies)
0 siblings, 8 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:34 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
Hi all,
The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
share the same IP, so a lot of parts can be re-used. I split the common
code into bridge directory, then rk3288 and exynos only need to keep
some platform code. Cause I can't find the exact IP name of exynos dp
controller, so I decide to name dp core driver with "analogix" which I
find in rk3288 eDP TRM ;)
Beyond that, there are three light registers setting differents bewteen
exynos and rk3288.
1. RK3288 have five special pll resigters which not indicata in exynos
dp controller.
2. The address of DP_PHY_PD(dp phy power manager register) are different
between rk3288 and exynos.
3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp debug
register).
My series patches can be divider into two parts: One for spliting the
analogix_dp code from exynos dp driver. Another are trying to add rk3288
platform special code.
Thanks,
- Yakir
Changes in v2:
- Take Joe Preches advise, improved commit message more readable, and
avoid using some uncommon style like bellow:
- retval = exynos_dp_read_bytes_from_i2c(...
...)
+ retval =
+ exynos_dp_read_bytes_from_i2c(......);
- Take Jingoo Han suggest, cause I jsut improve parts
of the code, so just remove my name from author list.
- Take Jingoo Han suggest, remove new copyright
- Fix compiled failed dut to analogix_dp_device misspell
- Add GNU license v2 declared and samsung copyright
- Fix compile failed dut to phy_pd_addr variable misspell error
Yakir Yang (8):
drm: exynos/dp: fix code style
drm: exynos/dp: convert to drm bridge mode
drm: bridge: analogix_dp: split exynos dp driver to bridge dir
drm: rockchip/dp: add rockchip platform dp driver
drm: bridge/analogix_dp: add platform device type support
drm: bridge: analogix_dp: add some rk3288 special registers setting
drm: bridge: analogix_dp: try force hpd after plug in lookup failed
drm: bridge/analogix_dp: expand the delay time for hpd detect
drivers/gpu/drm/bridge/Kconfig | 5 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/analogix_dp_core.c | 1397 +++++++++++++++++++
drivers/gpu/drm/bridge/analogix_dp_core.h | 286 ++++
drivers/gpu/drm/bridge/analogix_dp_reg.c | 1294 ++++++++++++++++++
.../exynos_dp_reg.h => bridge/analogix_dp_reg.h} | 270 ++--
drivers/gpu/drm/exynos/Kconfig | 5 +-
drivers/gpu/drm/exynos/Makefile | 2 +-
drivers/gpu/drm/exynos/analogix_dp-exynos.c | 238 ++++
drivers/gpu/drm/exynos/exynos_dp_core.c | 1416 --------------------
drivers/gpu/drm/exynos/exynos_dp_core.h | 282 ----
drivers/gpu/drm/exynos/exynos_dp_reg.c | 1263 -----------------
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 420 ++++++
include/drm/bridge/analogix_dp.h | 38 +
16 files changed, 3835 insertions(+), 3093 deletions(-)
create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.c
create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.h
create mode 100644 drivers/gpu/drm/bridge/analogix_dp_reg.c
rename drivers/gpu/drm/{exynos/exynos_dp_reg.h => bridge/analogix_dp_reg.h} (62%)
create mode 100644 drivers/gpu/drm/exynos/analogix_dp-exynos.c
delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.c
delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h
delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.c
create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
create mode 100644 include/drm/bridge/analogix_dp.h
--
1.9.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 1/8] drm: exynos/dp: fix code style
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
@ 2015-08-07 10:37 ` Yakir Yang
2015-08-07 10:40 ` [PATCH v2 2/8] drm: exynos/dp: convert to drm bridge mode Yakir Yang
` (6 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:37 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
After run "checkpatch.pl -f --subjective" command, I see there
are lots of alignment problem in exynos_dp driver, so let just
fix them.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- Take Joe Preches advise, improved commit message more readable, and
avoid using some uncommon style like bellow:
- retval = exynos_dp_read_bytes_from_i2c(...
...)
+ retval =
+ exynos_dp_read_bytes_from_i2c(......);
drivers/gpu/drm/exynos/exynos_dp_core.c | 219 ++++++++++++++++----------------
drivers/gpu/drm/exynos/exynos_dp_core.h | 53 ++++----
drivers/gpu/drm/exynos/exynos_dp_reg.c | 100 +++++++--------
3 files changed, 182 insertions(+), 190 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c
index 172b800..562f4a8 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_core.c
+++ b/drivers/gpu/drm/exynos/exynos_dp_core.c
@@ -114,8 +114,8 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
/* Read Extension Flag, Number of 128-byte EDID extension blocks */
retval = exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_EXTENSION_FLAG,
- &extend_block);
+ EDID_EXTENSION_FLAG,
+ &extend_block);
if (retval)
return retval;
@@ -123,10 +123,11 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
dev_dbg(dp->dev, "EDID data includes a single extension!\n");
/* Read EDID data */
- retval = exynos_dp_read_bytes_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- &edid[EDID_HEADER_PATTERN]);
+ retval = exynos_dp_read_bytes_from_i2c(
+ dp, I2C_EDID_DEVICE_ADDR,
+ EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH,
+ &edid[EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
@@ -138,11 +139,11 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
}
/* Read additional EDID data */
- retval = exynos_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_BLOCK_LENGTH,
- EDID_BLOCK_LENGTH,
- &edid[EDID_BLOCK_LENGTH]);
+ retval = exynos_dp_read_bytes_from_i2c(
+ dp, I2C_EDID_DEVICE_ADDR,
+ EDID_BLOCK_LENGTH,
+ EDID_BLOCK_LENGTH,
+ &edid[EDID_BLOCK_LENGTH]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
@@ -154,24 +155,22 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
}
exynos_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- &test_vector);
+ &test_vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
- exynos_dp_write_byte_to_dpcd(dp,
- DP_TEST_EDID_CHECKSUM,
+ exynos_dp_write_byte_to_dpcd(
+ dp, DP_TEST_EDID_CHECKSUM,
edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
- exynos_dp_write_byte_to_dpcd(dp,
- DP_TEST_RESPONSE,
+ exynos_dp_write_byte_to_dpcd(
+ dp, DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
}
} else {
dev_info(dp->dev, "EDID data does not include any extensions.\n");
/* Read EDID data */
- retval = exynos_dp_read_bytes_from_i2c(dp,
- I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- &edid[EDID_HEADER_PATTERN]);
+ retval = exynos_dp_read_bytes_from_i2c(
+ dp, I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH, &edid[EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
@@ -182,16 +181,15 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
return -EIO;
}
- exynos_dp_read_byte_from_dpcd(dp,
- DP_TEST_REQUEST,
- &test_vector);
+ exynos_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
+ &test_vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
- exynos_dp_write_byte_to_dpcd(dp,
- DP_TEST_EDID_CHECKSUM,
- edid[EDID_CHECKSUM]);
- exynos_dp_write_byte_to_dpcd(dp,
- DP_TEST_RESPONSE,
- DP_TEST_EDID_CHECKSUM_WRITE);
+ exynos_dp_write_byte_to_dpcd(
+ dp, DP_TEST_EDID_CHECKSUM,
+ edid[EDID_CHECKSUM]);
+ exynos_dp_write_byte_to_dpcd(
+ dp, DP_TEST_RESPONSE,
+ DP_TEST_EDID_CHECKSUM_WRITE);
}
}
@@ -206,8 +204,7 @@ static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
int retval;
/* Read DPCD DP_DPCD_REV~RECEIVE_PORT1_CAP_1 */
- retval = exynos_dp_read_bytes_from_dpcd(dp, DP_DPCD_REV,
- 12, buf);
+ retval = exynos_dp_read_bytes_from_dpcd(dp, DP_DPCD_REV, 12, buf);
if (retval)
return retval;
@@ -222,19 +219,21 @@ static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
}
static void exynos_dp_enable_rx_to_enhanced_mode(struct exynos_dp_device *dp,
- bool enable)
+ bool enable)
{
u8 data;
exynos_dp_read_byte_from_dpcd(dp, DP_LANE_COUNT_SET, &data);
if (enable)
- exynos_dp_write_byte_to_dpcd(dp, DP_LANE_COUNT_SET,
- DP_LANE_COUNT_ENHANCED_FRAME_EN |
- DPCD_LANE_COUNT_SET(data));
+ exynos_dp_write_byte_to_dpcd(
+ dp, DP_LANE_COUNT_SET,
+ DP_LANE_COUNT_ENHANCED_FRAME_EN |
+ DPCD_LANE_COUNT_SET(data));
else
- exynos_dp_write_byte_to_dpcd(dp, DP_LANE_COUNT_SET,
- DPCD_LANE_COUNT_SET(data));
+ exynos_dp_write_byte_to_dpcd(
+ dp, DP_LANE_COUNT_SET,
+ DPCD_LANE_COUNT_SET(data));
}
static int exynos_dp_is_enhanced_mode_available(struct exynos_dp_device *dp)
@@ -261,13 +260,12 @@ static void exynos_dp_training_pattern_dis(struct exynos_dp_device *dp)
{
exynos_dp_set_training_pattern(dp, DP_NONE);
- exynos_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- DP_TRAINING_PATTERN_DISABLE);
+ exynos_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET,
+ DP_TRAINING_PATTERN_DISABLE);
}
static void exynos_dp_set_lane_lane_pre_emphasis(struct exynos_dp_device *dp,
- int pre_emphasis, int lane)
+ int pre_emphasis, int lane)
{
switch (lane) {
case 0:
@@ -307,15 +305,14 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp)
/* Setup RX configuration */
buf[0] = dp->link_train.link_rate;
buf[1] = dp->link_train.lane_count;
- retval = exynos_dp_write_bytes_to_dpcd(dp, DP_LINK_BW_SET,
- 2, buf);
+ retval = exynos_dp_write_bytes_to_dpcd(dp, DP_LINK_BW_SET, 2, buf);
if (retval)
return retval;
/* Set TX pre-emphasis to minimum */
for (lane = 0; lane < lane_count; lane++)
- exynos_dp_set_lane_lane_pre_emphasis(dp,
- PRE_EMPHASIS_LEVEL_0, lane);
+ exynos_dp_set_lane_lane_pre_emphasis(dp, PRE_EMPHASIS_LEVEL_0,
+ lane);
/* Wait for PLL lock */
pll_tries = 0;
@@ -333,9 +330,9 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp)
exynos_dp_set_training_pattern(dp, TRAINING_PTN1);
/* Set RX training pattern */
- retval = exynos_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- DP_LINK_SCRAMBLING_DISABLE | DP_TRAINING_PATTERN_1);
+ retval = exynos_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET,
+ DP_LINK_SCRAMBLING_DISABLE |
+ DP_TRAINING_PATTERN_1);
if (retval)
return retval;
@@ -344,7 +341,7 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp)
DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
retval = exynos_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
- lane_count, buf);
+ lane_count, buf);
return retval;
}
@@ -352,7 +349,7 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp)
static unsigned char exynos_dp_get_lane_status(u8 link_status[2], int lane)
{
int shift = (lane & 1) * 4;
- u8 link_value = link_status[lane>>1];
+ u8 link_value = link_status[lane >> 1];
return (link_value >> shift) & 0xf;
}
@@ -371,7 +368,7 @@ static int exynos_dp_clock_recovery_ok(u8 link_status[2], int lane_count)
}
static int exynos_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
- int lane_count)
+ int lane_count)
{
int lane;
u8 lane_status;
@@ -390,10 +387,10 @@ static int exynos_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
}
static unsigned char exynos_dp_get_adjust_request_voltage(u8 adjust_request[2],
- int lane)
+ int lane)
{
int shift = (lane & 1) * 4;
- u8 link_value = adjust_request[lane>>1];
+ u8 link_value = adjust_request[lane >> 1];
return (link_value >> shift) & 0x3;
}
@@ -403,13 +400,13 @@ static unsigned char exynos_dp_get_adjust_request_pre_emphasis(
int lane)
{
int shift = (lane & 1) * 4;
- u8 link_value = adjust_request[lane>>1];
+ u8 link_value = adjust_request[lane >> 1];
return ((link_value >> shift) & 0xc) >> 2;
}
static void exynos_dp_set_lane_link_training(struct exynos_dp_device *dp,
- u8 training_lane_set, int lane)
+ u8 training_lane_set, int lane)
{
switch (lane) {
case 0:
@@ -465,7 +462,7 @@ static void exynos_dp_reduce_link_rate(struct exynos_dp_device *dp)
}
static void exynos_dp_get_adjust_training_lane(struct exynos_dp_device *dp,
- u8 adjust_request[2])
+ u8 adjust_request[2])
{
int lane, lane_count;
u8 voltage_swing, pre_emphasis, training_lane;
@@ -498,13 +495,13 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
lane_count = dp->link_train.lane_count;
- retval = exynos_dp_read_bytes_from_dpcd(dp,
- DP_LANE0_1_STATUS, 2, link_status);
+ retval = exynos_dp_read_bytes_from_dpcd(dp, DP_LANE0_1_STATUS,
+ 2, link_status);
if (retval)
return retval;
- retval = exynos_dp_read_bytes_from_dpcd(dp,
- DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request);
+ retval = exynos_dp_read_bytes_from_dpcd(dp, DP_ADJUST_REQUEST_LANE0_1,
+ 2, adjust_request);
if (retval)
return retval;
@@ -512,8 +509,8 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
/* set training pattern 2 for EQ */
exynos_dp_set_training_pattern(dp, TRAINING_PTN2);
- retval = exynos_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
+ retval = exynos_dp_write_byte_to_dpcd(
+ dp, DP_TRAINING_PATTERN_SET,
DP_LINK_SCRAMBLING_DISABLE |
DP_TRAINING_PATTERN_2);
if (retval)
@@ -551,11 +548,11 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
exynos_dp_get_adjust_training_lane(dp, adjust_request);
for (lane = 0; lane < lane_count; lane++)
- exynos_dp_set_lane_link_training(dp,
- dp->link_train.training_lane[lane], lane);
+ exynos_dp_set_lane_link_training(
+ dp, dp->link_train.training_lane[lane], lane);
- retval = exynos_dp_write_bytes_to_dpcd(dp,
- DP_TRAINING_LANE0_SET, lane_count,
+ retval = exynos_dp_write_bytes_to_dpcd(
+ dp, DP_TRAINING_LANE0_SET, lane_count,
dp->link_train.training_lane);
if (retval)
return retval;
@@ -573,8 +570,8 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
lane_count = dp->link_train.lane_count;
- retval = exynos_dp_read_bytes_from_dpcd(dp,
- DP_LANE0_1_STATUS, 2, link_status);
+ retval = exynos_dp_read_bytes_from_dpcd(dp, DP_LANE0_1_STATUS,
+ 2, link_status);
if (retval)
return retval;
@@ -583,13 +580,13 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
return -EIO;
}
- retval = exynos_dp_read_bytes_from_dpcd(dp,
- DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request);
+ retval = exynos_dp_read_bytes_from_dpcd(dp, DP_ADJUST_REQUEST_LANE0_1,
+ 2, adjust_request);
if (retval)
return retval;
- retval = exynos_dp_read_byte_from_dpcd(dp,
- DP_LANE_ALIGN_STATUS_UPDATED, &link_align);
+ retval = exynos_dp_read_byte_from_dpcd(
+ dp, DP_LANE_ALIGN_STATUS_UPDATED, &link_align);
if (retval)
return retval;
@@ -628,17 +625,18 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
}
for (lane = 0; lane < lane_count; lane++)
- exynos_dp_set_lane_link_training(dp,
- dp->link_train.training_lane[lane], lane);
+ exynos_dp_set_lane_link_training(
+ dp, dp->link_train.training_lane[lane], lane);
retval = exynos_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
- lane_count, dp->link_train.training_lane);
+ lane_count,
+ dp->link_train.training_lane);
return retval;
}
static void exynos_dp_get_max_rx_bandwidth(struct exynos_dp_device *dp,
- u8 *bandwidth)
+ u8 *bandwidth)
{
u8 data;
@@ -651,7 +649,7 @@ static void exynos_dp_get_max_rx_bandwidth(struct exynos_dp_device *dp,
}
static void exynos_dp_get_max_rx_lane_count(struct exynos_dp_device *dp,
- u8 *lane_count)
+ u8 *lane_count)
{
u8 data;
@@ -664,8 +662,8 @@ static void exynos_dp_get_max_rx_lane_count(struct exynos_dp_device *dp,
}
static void exynos_dp_init_training(struct exynos_dp_device *dp,
- enum link_lane_count_type max_lane,
- enum link_rate_type max_rate)
+ enum link_lane_count_type max_lane,
+ enum link_rate_type max_rate)
{
/*
* MACRO_RST must be applied after the PLL_LOCK to avoid
@@ -678,7 +676,7 @@ static void exynos_dp_init_training(struct exynos_dp_device *dp,
exynos_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
- (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
+ (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
dp->link_train.link_rate);
dp->link_train.link_rate = LINK_RATE_1_62GBPS;
@@ -738,8 +736,7 @@ static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
}
static int exynos_dp_set_link_train(struct exynos_dp_device *dp,
- u32 count,
- u32 bwtype)
+ u32 count, u32 bwtype)
{
int i;
int retval;
@@ -830,21 +827,19 @@ static void exynos_dp_enable_scramble(struct exynos_dp_device *dp, bool enable)
if (enable) {
exynos_dp_enable_scrambling(dp);
- exynos_dp_read_byte_from_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- &data);
- exynos_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
+ exynos_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET,
+ &data);
+ exynos_dp_write_byte_to_dpcd(
+ dp, DP_TRAINING_PATTERN_SET,
(u8)(data & ~DP_LINK_SCRAMBLING_DISABLE));
} else {
exynos_dp_disable_scrambling(dp);
- exynos_dp_read_byte_from_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- &data);
- exynos_dp_write_byte_to_dpcd(dp,
- DP_TRAINING_PATTERN_SET,
- (u8)(data | DP_LINK_SCRAMBLING_DISABLE));
+ exynos_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET,
+ &data);
+ exynos_dp_write_byte_to_dpcd(
+ dp, DP_TRAINING_PATTERN_SET,
+ (u8)(data | DP_LINK_SCRAMBLING_DISABLE));
}
}
@@ -915,7 +910,7 @@ static void exynos_dp_commit(struct exynos_drm_display *display)
}
ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
+ dp->video_info->link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
@@ -1004,7 +999,7 @@ static struct drm_connector_helper_funcs exynos_dp_connector_helper_funcs = {
/* returns the number of bridges attached */
static int exynos_drm_attach_lcd_bridge(struct exynos_dp_device *dp,
- struct drm_encoder *encoder)
+ struct drm_encoder *encoder)
{
int ret;
@@ -1020,7 +1015,7 @@ static int exynos_drm_attach_lcd_bridge(struct exynos_dp_device *dp,
}
static int exynos_dp_create_connector(struct exynos_drm_display *display,
- struct drm_encoder *encoder)
+ struct drm_encoder *encoder)
{
struct exynos_dp_device *dp = display_to_dp(display);
struct drm_connector *connector = &dp->connector;
@@ -1038,7 +1033,8 @@ static int exynos_dp_create_connector(struct exynos_drm_display *display,
connector->polled = DRM_CONNECTOR_POLL_HPD;
ret = drm_connector_init(dp->drm_dev, connector,
- &exynos_dp_connector_funcs, DRM_MODE_CONNECTOR_eDP);
+ &exynos_dp_connector_funcs,
+ DRM_MODE_CONNECTOR_eDP);
if (ret) {
DRM_ERROR("Failed to initialize connector with drm\n");
return ret;
@@ -1148,8 +1144,8 @@ static struct video_info *exynos_dp_dt_parse_pdata(struct device *dev)
struct device_node *dp_node = dev->of_node;
struct video_info *dp_video_config;
- dp_video_config = devm_kzalloc(dev,
- sizeof(*dp_video_config), GFP_KERNEL);
+ dp_video_config = devm_kzalloc(dev, sizeof(*dp_video_config),
+ GFP_KERNEL);
if (!dp_video_config)
return ERR_PTR(-ENOMEM);
@@ -1163,37 +1159,37 @@ static struct video_info *exynos_dp_dt_parse_pdata(struct device *dev)
of_property_read_bool(dp_node, "interlaced");
if (of_property_read_u32(dp_node, "samsung,color-space",
- &dp_video_config->color_space)) {
+ &dp_video_config->color_space)) {
dev_err(dev, "failed to get color-space\n");
return ERR_PTR(-EINVAL);
}
if (of_property_read_u32(dp_node, "samsung,dynamic-range",
- &dp_video_config->dynamic_range)) {
+ &dp_video_config->dynamic_range)) {
dev_err(dev, "failed to get dynamic-range\n");
return ERR_PTR(-EINVAL);
}
if (of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
- &dp_video_config->ycbcr_coeff)) {
+ &dp_video_config->ycbcr_coeff)) {
dev_err(dev, "failed to get ycbcr-coeff\n");
return ERR_PTR(-EINVAL);
}
if (of_property_read_u32(dp_node, "samsung,color-depth",
- &dp_video_config->color_depth)) {
+ &dp_video_config->color_depth)) {
dev_err(dev, "failed to get color-depth\n");
return ERR_PTR(-EINVAL);
}
if (of_property_read_u32(dp_node, "samsung,link-rate",
- &dp_video_config->link_rate)) {
+ &dp_video_config->link_rate)) {
dev_err(dev, "failed to get link-rate\n");
return ERR_PTR(-EINVAL);
}
if (of_property_read_u32(dp_node, "samsung,lane-count",
- &dp_video_config->lane_count)) {
+ &dp_video_config->lane_count)) {
dev_err(dev, "failed to get lane-count\n");
return ERR_PTR(-EINVAL);
}
@@ -1206,7 +1202,7 @@ static int exynos_dp_dt_parse_panel(struct exynos_dp_device *dp)
int ret;
ret = of_get_videomode(dp->dev->of_node, &dp->priv.vm,
- OF_USE_NATIVE_MODE);
+ OF_USE_NATIVE_MODE);
if (ret) {
DRM_ERROR("failed: of_get_videomode() : %d\n", ret);
return ret;
@@ -1302,7 +1298,7 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
exynos_dp_init_dp(dp);
ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler,
- irq_flags, "exynos-dp", dp);
+ irq_flags, "exynos-dp", dp);
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
return ret;
@@ -1315,7 +1311,7 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
}
static void exynos_dp_unbind(struct device *dev, struct device *master,
- void *data)
+ void *data)
{
struct exynos_dp_device *dp = dev_get_drvdata(dev);
@@ -1334,7 +1330,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
struct exynos_dp_device *dp;
dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
- GFP_KERNEL);
+ GFP_KERNEL);
if (!dp)
return -ENOMEM;
@@ -1358,8 +1354,9 @@ static int exynos_dp_probe(struct platform_device *pdev)
of_node_put(bridge_node);
if (!dp->bridge)
return -EPROBE_DEFER;
- } else
+ } else {
return -EPROBE_DEFER;
+ }
}
return component_add(&pdev->dev, &exynos_dp_ops);
diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.h b/drivers/gpu/drm/exynos/exynos_dp_core.h
index a4e7996..c321ad5 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_core.h
+++ b/drivers/gpu/drm/exynos/exynos_dp_core.h
@@ -180,8 +180,8 @@ void exynos_dp_config_interrupt(struct exynos_dp_device *dp);
enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp);
void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable);
void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
- enum analog_power_block block,
- bool enable);
+ enum analog_power_block block,
+ bool enable);
void exynos_dp_init_analog_func(struct exynos_dp_device *dp);
void exynos_dp_init_hpd(struct exynos_dp_device *dp);
enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp);
@@ -192,50 +192,50 @@ int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp);
void exynos_dp_enable_sw_function(struct exynos_dp_device *dp);
int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp);
int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned char data);
+ unsigned int reg_addr,
+ unsigned char data);
int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned char *data);
+ unsigned int reg_addr,
+ unsigned char *data);
int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[]);
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[]);
int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[]);
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[]);
int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
unsigned int device_addr,
unsigned int reg_addr);
int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int *data);
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int *data);
int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char edid[]);
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char edid[]);
void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype);
void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype);
void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count);
void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count);
void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable);
void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
- enum pattern_set pattern);
+ enum pattern_set pattern);
void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level);
void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level);
void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level);
void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level);
void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
- u32 training_lane);
+ u32 training_lane);
void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
- u32 training_lane);
+ u32 training_lane);
void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
- u32 training_lane);
+ u32 training_lane);
void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
- u32 training_lane);
+ u32 training_lane);
u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp);
u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp);
u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp);
@@ -246,9 +246,8 @@ void exynos_dp_init_video(struct exynos_dp_device *dp);
void exynos_dp_set_video_color_format(struct exynos_dp_device *dp);
int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp);
void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
- enum clock_recovery_m_value_type type,
- u32 m_value,
- u32 n_value);
+ enum clock_recovery_m_value_type type,
+ u32 m_value, u32 n_value);
void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type);
void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable);
void exynos_dp_start_video(struct exynos_dp_device *dp);
diff --git a/drivers/gpu/drm/exynos/exynos_dp_reg.c b/drivers/gpu/drm/exynos/exynos_dp_reg.c
index c1f87a2..9aa483d 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_reg.c
+++ b/drivers/gpu/drm/exynos/exynos_dp_reg.c
@@ -202,8 +202,8 @@ void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable)
}
void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
- enum analog_power_block block,
- bool enable)
+ enum analog_power_block block,
+ bool enable)
{
u32 reg;
@@ -399,8 +399,8 @@ void exynos_dp_init_aux(struct exynos_dp_device *dp)
exynos_dp_reset_aux(dp);
/* Disable AUX transaction H/W retry */
- reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0)|
- AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+ reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0) |
+ AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
writel(reg, dp->reg_base + EXYNOS_DP_AUX_HW_RETRY_CTL);
/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
@@ -483,8 +483,8 @@ int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp)
}
int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned char data)
+ unsigned int reg_addr,
+ unsigned char data)
{
u32 reg;
int i;
@@ -519,17 +519,16 @@ int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
retval = exynos_dp_start_aux_transaction(dp);
if (retval == 0)
break;
- else
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
}
return retval;
}
int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned char *data)
+ unsigned int reg_addr,
+ unsigned char *data)
{
u32 reg;
int i;
@@ -560,9 +559,8 @@ int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
retval = exynos_dp_start_aux_transaction(dp);
if (retval == 0)
break;
- else
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
}
/* Read data buffer */
@@ -573,9 +571,9 @@ int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
}
int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[])
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[])
{
u32 reg;
unsigned int start_offset;
@@ -625,9 +623,9 @@ int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
retval = exynos_dp_start_aux_transaction(dp);
if (retval == 0)
break;
- else
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
+ __func__);
}
start_offset += cur_data_count;
@@ -637,9 +635,9 @@ int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
}
int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[])
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[])
{
u32 reg;
unsigned int start_offset;
@@ -683,9 +681,9 @@ int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
retval = exynos_dp_start_aux_transaction(dp);
if (retval == 0)
break;
- else
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
+ __func__);
}
for (cur_data_idx = 0; cur_data_idx < cur_data_count;
@@ -736,9 +734,9 @@ int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
}
int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int *data)
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int *data)
{
u32 reg;
int i;
@@ -767,9 +765,8 @@ int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
retval = exynos_dp_start_aux_transaction(dp);
if (retval == 0)
break;
- else
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
}
/* Read data */
@@ -780,10 +777,10 @@ int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
}
int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char edid[])
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char edid[])
{
u32 reg;
unsigned int i, j;
@@ -807,8 +804,8 @@ int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
* request without sending address
*/
if (!defer)
- retval = exynos_dp_select_i2c_device(dp,
- device_addr, reg_addr + i);
+ retval = exynos_dp_select_i2c_device(
+ dp, device_addr, reg_addr + i);
else
defer = 0;
@@ -828,15 +825,14 @@ int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
retval = exynos_dp_start_aux_transaction(dp);
if (retval == 0)
break;
- else
- dev_dbg(dp->dev,
- "%s: Aux Transaction fail!\n",
- __func__);
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
+ __func__);
}
/* Check if Rx sends defer */
reg = readl(dp->reg_base + EXYNOS_DP_AUX_RX_COMM);
if (reg == AUX_RX_COMM_AUX_DEFER ||
- reg == AUX_RX_COMM_I2C_DEFER) {
+ reg == AUX_RX_COMM_I2C_DEFER) {
dev_err(dp->dev, "Defer: %d\n\n", reg);
defer = 1;
}
@@ -901,7 +897,7 @@ void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable)
}
void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
- enum pattern_set pattern)
+ enum pattern_set pattern)
{
u32 reg;
@@ -974,7 +970,7 @@ void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level)
}
void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
- u32 training_lane)
+ u32 training_lane)
{
u32 reg;
@@ -983,7 +979,7 @@ void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
}
void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
- u32 training_lane)
+ u32 training_lane)
{
u32 reg;
@@ -992,7 +988,7 @@ void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
}
void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
- u32 training_lane)
+ u32 training_lane)
{
u32 reg;
@@ -1001,7 +997,7 @@ void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
}
void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
- u32 training_lane)
+ u32 training_lane)
{
u32 reg;
@@ -1125,9 +1121,9 @@ int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp)
}
void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
- enum clock_recovery_m_value_type type,
- u32 m_value,
- u32 n_value)
+ enum clock_recovery_m_value_type type,
+ u32 m_value,
+ u32 n_value)
{
u32 reg;
@@ -1221,7 +1217,7 @@ void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp)
u32 reg;
reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
- reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N);
+ reg &= ~(MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N);
reg |= MASTER_VID_FUNC_EN_N;
writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 2/8] drm: exynos/dp: convert to drm bridge mode
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
2015-08-07 10:37 ` [PATCH v2 1/8] drm: exynos/dp: fix code style Yakir Yang
@ 2015-08-07 10:40 ` Yakir Yang
2015-08-07 10:43 ` [PATCH v2 3/8] drm: bridge: analogix_dp: split exynos dp driver to bridge dir Yakir Yang
` (5 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:40 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
In order to move exynos dp code to bridge directory,
we need to convert driver drm bridge mode first. As
dp driver already have a ptn3460 bridge, so we need
to move ptn bridge to the next bridge of dp bridge.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- Take Jingoo Han suggest, cause I jsut improve parts
of the code, so just remove my name from author list.
drivers/gpu/drm/exynos/exynos_dp_core.c | 194 ++++++++++++++++++++------------
drivers/gpu/drm/exynos/exynos_dp_core.h | 1 +
2 files changed, 123 insertions(+), 72 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c
index 562f4a8..2b87406 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_core.c
+++ b/drivers/gpu/drm/exynos/exynos_dp_core.c
@@ -997,59 +997,6 @@ static struct drm_connector_helper_funcs exynos_dp_connector_helper_funcs = {
.best_encoder = exynos_dp_best_encoder,
};
-/* returns the number of bridges attached */
-static int exynos_drm_attach_lcd_bridge(struct exynos_dp_device *dp,
- struct drm_encoder *encoder)
-{
- int ret;
-
- encoder->bridge = dp->bridge;
- dp->bridge->encoder = encoder;
- ret = drm_bridge_attach(encoder->dev, dp->bridge);
- if (ret) {
- DRM_ERROR("Failed to attach bridge to drm\n");
- return ret;
- }
-
- return 0;
-}
-
-static int exynos_dp_create_connector(struct exynos_drm_display *display,
- struct drm_encoder *encoder)
-{
- struct exynos_dp_device *dp = display_to_dp(display);
- struct drm_connector *connector = &dp->connector;
- int ret;
-
- dp->encoder = encoder;
-
- /* Pre-empt DP connector creation if there's a bridge */
- if (dp->bridge) {
- ret = exynos_drm_attach_lcd_bridge(dp, encoder);
- if (!ret)
- return 0;
- }
-
- connector->polled = DRM_CONNECTOR_POLL_HPD;
-
- ret = drm_connector_init(dp->drm_dev, connector,
- &exynos_dp_connector_funcs,
- DRM_MODE_CONNECTOR_eDP);
- if (ret) {
- DRM_ERROR("Failed to initialize connector with drm\n");
- return ret;
- }
-
- drm_connector_helper_add(connector, &exynos_dp_connector_helper_funcs);
- drm_connector_register(connector);
- drm_mode_connector_attach_encoder(connector, encoder);
-
- if (dp->panel)
- ret = drm_panel_attach(dp->panel, &dp->connector);
-
- return ret;
-}
-
static void exynos_dp_phy_init(struct exynos_dp_device *dp)
{
if (dp->phy)
@@ -1114,23 +1061,126 @@ static void exynos_dp_poweroff(struct exynos_dp_device *dp)
}
}
-static void exynos_dp_dpms(struct exynos_drm_display *display, int mode)
+/* returns the number of bridges attached */
+static int exynos_drm_attach_lcd_bridge(struct exynos_dp_device *dp,
+ struct drm_encoder *encoder)
+{
+ int ret;
+
+ dp->bridge->next = dp->ptn_bridge;
+ dp->bridge->encoder = encoder;
+ ret = drm_bridge_attach(encoder->dev, dp->bridge);
+ if (ret) {
+ DRM_ERROR("Failed to attach ptn bridge to drm\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int exynos_dp_bridge_attach(struct drm_bridge *bridge)
+{
+
+ struct exynos_dp_device *dp = bridge->driver_private;
+ struct drm_encoder *encoder = dp->encoder;
+ struct drm_connector *connector = &dp->connector;
+ int ret;
+
+ if (!bridge->encoder) {
+ DRM_ERROR("Parent encoder object not found");
+ return -ENODEV;
+ }
+
+ encoder->bridge = bridge;
+
+ /* Pre-empt DP connector creation if there's a bridge */
+ if (dp->ptn_bridge) {
+ ret = exynos_drm_attach_lcd_bridge(dp, encoder);
+ if (ret)
+ return -ENODEV;
+ }
+
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+ ret = drm_connector_init(dp->drm_dev, connector,
+ &exynos_dp_connector_funcs, DRM_MODE_CONNECTOR_eDP);
+ if (ret) {
+ DRM_ERROR("Failed to initialize connector with drm\n");
+ return ret;
+ }
+
+ drm_connector_helper_add(connector, &exynos_dp_connector_helper_funcs);
+ drm_connector_register(connector);
+ drm_mode_connector_attach_encoder(connector, encoder);
+
+ if (dp->panel)
+ ret = drm_panel_attach(dp->panel, &dp->connector);
+
+ return ret;
+}
+
+static void exynos_dp_bridge_nop(struct drm_bridge *bridge)
+{
+ /* do nothing */
+}
+
+static void exynos_dp_bridge_enable(struct drm_bridge *bridge)
+{
+ struct exynos_dp_device *dp = bridge->driver_private;
+
+ exynos_dp_poweron(dp);
+ dp->dpms_mode = DRM_MODE_DPMS_ON;
+}
+
+static void exynos_dp_bridge_disable(struct drm_bridge *bridge)
+{
+ struct exynos_dp_device *dp = bridge->driver_private;
+
+ exynos_dp_poweroff(dp);
+ dp->dpms_mode = DRM_MODE_DPMS_OFF;
+}
+
+static const struct drm_bridge_funcs exynos_dp_bridge_funcs = {
+ .enable = exynos_dp_bridge_enable,
+ .disable = exynos_dp_bridge_disable,
+ .pre_enable = exynos_dp_bridge_nop,
+ .post_disable = exynos_dp_bridge_nop,
+ .attach = exynos_dp_bridge_attach,
+};
+
+static int exynos_dp_create_connector(struct exynos_drm_display *display,
+ struct drm_encoder *encoder)
{
struct exynos_dp_device *dp = display_to_dp(display);
+ struct drm_device *drm_dev = dp->drm_dev;
+ struct drm_bridge *bridge;
+ int ret;
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- exynos_dp_poweron(dp);
- break;
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- case DRM_MODE_DPMS_OFF:
- exynos_dp_poweroff(dp);
- break;
- default:
- break;
+ bridge = devm_kzalloc(drm_dev->dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge) {
+ DRM_ERROR("failed to allocate for drm bridge\n");
+ return -ENOMEM;
}
- dp->dpms_mode = mode;
+
+ dp->bridge = bridge;
+ dp->encoder = encoder;
+
+ bridge->driver_private = dp;
+ bridge->encoder = dp->encoder;
+ bridge->funcs = &exynos_dp_bridge_funcs;
+
+ ret = drm_bridge_attach(drm_dev, bridge);
+ if (ret) {
+ DRM_ERROR("failed to attach drm bridge\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void exynos_dp_dpms(struct exynos_drm_display *display, int mode)
+{
+ /* do nothing */
}
static struct exynos_drm_display_ops exynos_dp_display_ops = {
@@ -1242,7 +1292,7 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
}
}
- if (!dp->panel && !dp->bridge) {
+ if (!dp->panel && !dp->ptn_bridge) {
ret = exynos_dp_dt_parse_panel(dp);
if (ret)
return ret;
@@ -1315,7 +1365,7 @@ static void exynos_dp_unbind(struct device *dev, struct device *master,
{
struct exynos_dp_device *dp = dev_get_drvdata(dev);
- exynos_dp_dpms(&dp->display, DRM_MODE_DPMS_OFF);
+ exynos_dp_bridge_disable(dp->bridge);
}
static const struct component_ops exynos_dp_ops = {
@@ -1350,9 +1400,9 @@ static int exynos_dp_probe(struct platform_device *pdev)
if (endpoint) {
bridge_node = of_graph_get_remote_port_parent(endpoint);
if (bridge_node) {
- dp->bridge = of_drm_find_bridge(bridge_node);
+ dp->ptn_bridge = of_drm_find_bridge(bridge_node);
of_node_put(bridge_node);
- if (!dp->bridge)
+ if (!dp->ptn_bridge)
return -EPROBE_DEFER;
} else {
return -EPROBE_DEFER;
@@ -1374,7 +1424,7 @@ static int exynos_dp_suspend(struct device *dev)
{
struct exynos_dp_device *dp = dev_get_drvdata(dev);
- exynos_dp_dpms(&dp->display, DRM_MODE_DPMS_OFF);
+ exynos_dp_bridge_disable(dp->bridge);
return 0;
}
@@ -1382,7 +1432,7 @@ static int exynos_dp_resume(struct device *dev)
{
struct exynos_dp_device *dp = dev_get_drvdata(dev);
- exynos_dp_dpms(&dp->display, DRM_MODE_DPMS_ON);
+ exynos_dp_bridge_enable(dp->bridge);
return 0;
}
#endif
diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.h b/drivers/gpu/drm/exynos/exynos_dp_core.h
index c321ad5..29bd56e 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_core.h
+++ b/drivers/gpu/drm/exynos/exynos_dp_core.h
@@ -154,6 +154,7 @@ struct exynos_dp_device {
struct drm_encoder *encoder;
struct drm_panel *panel;
struct drm_bridge *bridge;
+ struct drm_bridge *ptn_bridge;
struct clk *clock;
unsigned int irq;
void __iomem *reg_base;
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 3/8] drm: bridge: analogix_dp: split exynos dp driver to bridge dir
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
2015-08-07 10:37 ` [PATCH v2 1/8] drm: exynos/dp: fix code style Yakir Yang
2015-08-07 10:40 ` [PATCH v2 2/8] drm: exynos/dp: convert to drm bridge mode Yakir Yang
@ 2015-08-07 10:43 ` Yakir Yang
2015-08-07 10:46 ` [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver Yakir Yang
` (4 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:43 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
Split the dp core driver from exynos directory to bridge
directory, and rename the core driver to analogix_dp_*,
leave the platform code to analogix_dp-exynos.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- Take Jingoo Han suggest, remove new copyright
- Fix compiled failed dut to analogix_dp_device misspell
drivers/gpu/drm/bridge/Kconfig | 5 +
drivers/gpu/drm/bridge/Makefile | 1 +
.../exynos_dp_core.c => bridge/analogix_dp_core.c} | 764 ++++++------
drivers/gpu/drm/bridge/analogix_dp_core.h | 285 +++++
drivers/gpu/drm/bridge/analogix_dp_reg.c | 1265 ++++++++++++++++++++
.../exynos_dp_reg.h => bridge/analogix_dp_reg.h} | 258 ++--
drivers/gpu/drm/exynos/Kconfig | 5 +-
drivers/gpu/drm/exynos/Makefile | 2 +-
drivers/gpu/drm/exynos/analogix_dp-exynos.c | 237 ++++
drivers/gpu/drm/exynos/exynos_dp_core.h | 282 -----
drivers/gpu/drm/exynos/exynos_dp_reg.c | 1259 -------------------
include/drm/bridge/analogix_dp.h | 22 +
12 files changed, 2288 insertions(+), 2097 deletions(-)
rename drivers/gpu/drm/{exynos/exynos_dp_core.c => bridge/analogix_dp_core.c} (53%)
create mode 100644 drivers/gpu/drm/bridge/analogix_dp_core.h
create mode 100644 drivers/gpu/drm/bridge/analogix_dp_reg.c
rename drivers/gpu/drm/{exynos/exynos_dp_reg.h => bridge/analogix_dp_reg.h} (64%)
create mode 100644 drivers/gpu/drm/exynos/analogix_dp-exynos.c
delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h
delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.c
create mode 100644 include/drm/bridge/analogix_dp.h
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index acef322..c7638b5 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -3,6 +3,11 @@ config DRM_DW_HDMI
depends on DRM
select DRM_KMS_HELPER
+config DRM_ANALOGIX_DP
+ tristate
+ depends on DRM
+ select DRM_KMS_HELPER
+
config DRM_PTN3460
tristate "PTN3460 DP/LVDS bridge"
depends on DRM
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 8dfebd9..a7ee559 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -3,3 +3,4 @@ ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_PS8622) += ps8622.o
obj-$(CONFIG_DRM_PTN3460) += ptn3460.o
obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
+obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp_core.o analogix_dp_reg.o
diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/bridge/analogix_dp_core.c
similarity index 53%
rename from drivers/gpu/drm/exynos/exynos_dp_core.c
rename to drivers/gpu/drm/bridge/analogix_dp_core.c
index 2b87406..44be01d 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.c
@@ -1,5 +1,5 @@
/*
- * Samsung SoC DP (Display Port) interface driver.
+ * Analogix Core DP (Display Port) interface driver.
*
* Copyright (C) 2012 Samsung Electronics Co., Ltd.
* Author: Jingoo Han <jg1.han@samsung.com>
@@ -31,51 +31,42 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_panel.h>
-#include "exynos_dp_core.h"
+#include <drm/bridge/analogix_dp.h>
-#define ctx_from_connector(c) container_of(c, struct exynos_dp_device, \
- connector)
+#include "analogix_dp_core.h"
-static inline struct exynos_drm_crtc *dp_to_crtc(struct exynos_dp_device *dp)
-{
- return to_exynos_crtc(dp->encoder->crtc);
-}
-
-static inline struct exynos_dp_device *
-display_to_dp(struct exynos_drm_display *d)
-{
- return container_of(d, struct exynos_dp_device, display);
-}
+#define connector_to_dp(c) \
+ container_of(c, struct analogix_dp_device, connector)
struct bridge_init {
struct i2c_client *client;
struct device_node *node;
};
-static void exynos_dp_init_dp(struct exynos_dp_device *dp)
+static void analogix_dp_init_dp(struct analogix_dp_device *dp)
{
- exynos_dp_reset(dp);
+ analogix_dp_reset(dp);
- exynos_dp_swreset(dp);
+ analogix_dp_swreset(dp);
- exynos_dp_init_analog_param(dp);
- exynos_dp_init_interrupt(dp);
+ analogix_dp_init_analog_param(dp);
+ analogix_dp_init_interrupt(dp);
/* SW defined function Normal operation */
- exynos_dp_enable_sw_function(dp);
+ analogix_dp_enable_sw_function(dp);
- exynos_dp_config_interrupt(dp);
- exynos_dp_init_analog_func(dp);
+ analogix_dp_config_interrupt(dp);
+ analogix_dp_init_analog_func(dp);
- exynos_dp_init_hpd(dp);
- exynos_dp_init_aux(dp);
+ analogix_dp_init_hpd(dp);
+ analogix_dp_init_aux(dp);
}
-static int exynos_dp_detect_hpd(struct exynos_dp_device *dp)
+static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
{
int timeout_loop = 0;
- while (exynos_dp_get_plug_in_status(dp) != 0) {
+ while (analogix_dp_get_plug_in_status(dp) != 0) {
timeout_loop++;
if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
dev_err(dp->dev, "failed to get hpd plug status\n");
@@ -87,7 +78,7 @@ static int exynos_dp_detect_hpd(struct exynos_dp_device *dp)
return 0;
}
-static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
+static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data)
{
int i;
unsigned char sum = 0;
@@ -98,7 +89,7 @@ static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
return sum;
}
-static int exynos_dp_read_edid(struct exynos_dp_device *dp)
+static int analogix_dp_read_edid(struct analogix_dp_device *dp)
{
unsigned char edid[EDID_BLOCK_LENGTH * 2];
unsigned int extend_block = 0;
@@ -113,9 +104,9 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
*/
/* Read Extension Flag, Number of 128-byte EDID extension blocks */
- retval = exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
- EDID_EXTENSION_FLAG,
- &extend_block);
+ retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
+ EDID_EXTENSION_FLAG,
+ &extend_block);
if (retval)
return retval;
@@ -123,44 +114,44 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
dev_dbg(dp->dev, "EDID data includes a single extension!\n");
/* Read EDID data */
- retval = exynos_dp_read_bytes_from_i2c(
- dp, I2C_EDID_DEVICE_ADDR,
- EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH,
- &edid[EDID_HEADER_PATTERN]);
+ retval = analogix_dp_read_bytes_from_i2c(
+ dp, I2C_EDID_DEVICE_ADDR,
+ EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH,
+ &edid[EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
}
- sum = exynos_dp_calc_edid_check_sum(edid);
+ sum = analogix_dp_calc_edid_check_sum(edid);
if (sum != 0) {
dev_err(dp->dev, "EDID bad checksum!\n");
return -EIO;
}
/* Read additional EDID data */
- retval = exynos_dp_read_bytes_from_i2c(
- dp, I2C_EDID_DEVICE_ADDR,
- EDID_BLOCK_LENGTH,
- EDID_BLOCK_LENGTH,
- &edid[EDID_BLOCK_LENGTH]);
+ retval = analogix_dp_read_bytes_from_i2c(
+ dp, I2C_EDID_DEVICE_ADDR,
+ EDID_BLOCK_LENGTH,
+ EDID_BLOCK_LENGTH,
+ &edid[EDID_BLOCK_LENGTH]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
}
- sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
+ sum = analogix_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
if (sum != 0) {
dev_err(dp->dev, "EDID bad checksum!\n");
return -EIO;
}
- exynos_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- &test_vector);
+ analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
+ &test_vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
- exynos_dp_write_byte_to_dpcd(
+ analogix_dp_write_byte_to_dpcd(
dp, DP_TEST_EDID_CHECKSUM,
edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
- exynos_dp_write_byte_to_dpcd(
+ analogix_dp_write_byte_to_dpcd(
dp, DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
}
@@ -168,26 +159,28 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
dev_info(dp->dev, "EDID data does not include any extensions.\n");
/* Read EDID data */
- retval = exynos_dp_read_bytes_from_i2c(
- dp, I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN,
- EDID_BLOCK_LENGTH, &edid[EDID_HEADER_PATTERN]);
+ retval = analogix_dp_read_bytes_from_i2c(
+ dp, I2C_EDID_DEVICE_ADDR,
+ EDID_HEADER_PATTERN,
+ EDID_BLOCK_LENGTH,
+ &edid[EDID_HEADER_PATTERN]);
if (retval != 0) {
dev_err(dp->dev, "EDID Read failed!\n");
return -EIO;
}
- sum = exynos_dp_calc_edid_check_sum(edid);
+ sum = analogix_dp_calc_edid_check_sum(edid);
if (sum != 0) {
dev_err(dp->dev, "EDID bad checksum!\n");
return -EIO;
}
- exynos_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
- &test_vector);
+ analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST,
+ &test_vector);
if (test_vector & DP_TEST_LINK_EDID_READ) {
- exynos_dp_write_byte_to_dpcd(
+ analogix_dp_write_byte_to_dpcd(
dp, DP_TEST_EDID_CHECKSUM,
edid[EDID_CHECKSUM]);
- exynos_dp_write_byte_to_dpcd(
+ analogix_dp_write_byte_to_dpcd(
dp, DP_TEST_RESPONSE,
DP_TEST_EDID_CHECKSUM_WRITE);
}
@@ -197,20 +190,20 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
return 0;
}
-static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
+static int analogix_dp_handle_edid(struct analogix_dp_device *dp)
{
u8 buf[12];
int i;
int retval;
/* Read DPCD DP_DPCD_REV~RECEIVE_PORT1_CAP_1 */
- retval = exynos_dp_read_bytes_from_dpcd(dp, DP_DPCD_REV, 12, buf);
+ retval = analogix_dp_read_bytes_from_dpcd(dp, DP_DPCD_REV, 12, buf);
if (retval)
return retval;
/* Read EDID */
for (i = 0; i < 3; i++) {
- retval = exynos_dp_read_edid(dp);
+ retval = analogix_dp_read_edid(dp);
if (!retval)
break;
}
@@ -218,74 +211,76 @@ static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
return retval;
}
-static void exynos_dp_enable_rx_to_enhanced_mode(struct exynos_dp_device *dp,
- bool enable)
+static void
+analogix_dp_enable_rx_to_enhanced_mode(struct analogix_dp_device *dp,
+ bool enable)
{
u8 data;
- exynos_dp_read_byte_from_dpcd(dp, DP_LANE_COUNT_SET, &data);
+ analogix_dp_read_byte_from_dpcd(dp, DP_LANE_COUNT_SET, &data);
if (enable)
- exynos_dp_write_byte_to_dpcd(
+ analogix_dp_write_byte_to_dpcd(
dp, DP_LANE_COUNT_SET,
DP_LANE_COUNT_ENHANCED_FRAME_EN |
DPCD_LANE_COUNT_SET(data));
else
- exynos_dp_write_byte_to_dpcd(
+ analogix_dp_write_byte_to_dpcd(
dp, DP_LANE_COUNT_SET,
DPCD_LANE_COUNT_SET(data));
}
-static int exynos_dp_is_enhanced_mode_available(struct exynos_dp_device *dp)
+static int analogix_dp_is_enhanced_mode_available(struct analogix_dp_device *dp)
{
u8 data;
int retval;
- exynos_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data);
+ analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data);
retval = DPCD_ENHANCED_FRAME_CAP(data);
return retval;
}
-static void exynos_dp_set_enhanced_mode(struct exynos_dp_device *dp)
+static void analogix_dp_set_enhanced_mode(struct analogix_dp_device *dp)
{
u8 data;
- data = exynos_dp_is_enhanced_mode_available(dp);
- exynos_dp_enable_rx_to_enhanced_mode(dp, data);
- exynos_dp_enable_enhanced_mode(dp, data);
+ data = analogix_dp_is_enhanced_mode_available(dp);
+ analogix_dp_enable_rx_to_enhanced_mode(dp, data);
+ analogix_dp_enable_enhanced_mode(dp, data);
}
-static void exynos_dp_training_pattern_dis(struct exynos_dp_device *dp)
+static void analogix_dp_training_pattern_dis(struct analogix_dp_device *dp)
{
- exynos_dp_set_training_pattern(dp, DP_NONE);
+ analogix_dp_set_training_pattern(dp, DP_NONE);
- exynos_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET,
- DP_TRAINING_PATTERN_DISABLE);
+ analogix_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET,
+ DP_TRAINING_PATTERN_DISABLE);
}
-static void exynos_dp_set_lane_lane_pre_emphasis(struct exynos_dp_device *dp,
- int pre_emphasis, int lane)
+static void
+analogix_dp_set_lane_lane_pre_emphasis(struct analogix_dp_device *dp,
+ int pre_emphasis, int lane)
{
switch (lane) {
case 0:
- exynos_dp_set_lane0_pre_emphasis(dp, pre_emphasis);
+ analogix_dp_set_lane0_pre_emphasis(dp, pre_emphasis);
break;
case 1:
- exynos_dp_set_lane1_pre_emphasis(dp, pre_emphasis);
+ analogix_dp_set_lane1_pre_emphasis(dp, pre_emphasis);
break;
case 2:
- exynos_dp_set_lane2_pre_emphasis(dp, pre_emphasis);
+ analogix_dp_set_lane2_pre_emphasis(dp, pre_emphasis);
break;
case 3:
- exynos_dp_set_lane3_pre_emphasis(dp, pre_emphasis);
+ analogix_dp_set_lane3_pre_emphasis(dp, pre_emphasis);
break;
}
}
-static int exynos_dp_link_start(struct exynos_dp_device *dp)
+static int analogix_dp_link_start(struct analogix_dp_device *dp)
{
u8 buf[4];
int lane, lane_count, pll_tries, retval;
@@ -299,24 +294,24 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp)
dp->link_train.cr_loop[lane] = 0;
/* Set link rate and count as you want to establish*/
- exynos_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
- exynos_dp_set_lane_count(dp, dp->link_train.lane_count);
+ analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
+ analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
/* Setup RX configuration */
buf[0] = dp->link_train.link_rate;
buf[1] = dp->link_train.lane_count;
- retval = exynos_dp_write_bytes_to_dpcd(dp, DP_LINK_BW_SET, 2, buf);
+ retval = analogix_dp_write_bytes_to_dpcd(dp, DP_LINK_BW_SET, 2, buf);
if (retval)
return retval;
/* Set TX pre-emphasis to minimum */
for (lane = 0; lane < lane_count; lane++)
- exynos_dp_set_lane_lane_pre_emphasis(dp, PRE_EMPHASIS_LEVEL_0,
- lane);
+ analogix_dp_set_lane_lane_pre_emphasis(
+ dp, PRE_EMPHASIS_LEVEL_0, lane);
/* Wait for PLL lock */
pll_tries = 0;
- while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+ while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
if (pll_tries == DP_TIMEOUT_LOOP_COUNT) {
dev_err(dp->dev, "Wait for PLL lock timed out\n");
return -ETIMEDOUT;
@@ -327,12 +322,12 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp)
}
/* Set training pattern 1 */
- exynos_dp_set_training_pattern(dp, TRAINING_PTN1);
+ analogix_dp_set_training_pattern(dp, TRAINING_PTN1);
/* Set RX training pattern */
- retval = exynos_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET,
- DP_LINK_SCRAMBLING_DISABLE |
- DP_TRAINING_PATTERN_1);
+ retval = analogix_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET,
+ DP_LINK_SCRAMBLING_DISABLE |
+ DP_TRAINING_PATTERN_1);
if (retval)
return retval;
@@ -340,13 +335,13 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp)
buf[lane] = DP_TRAIN_PRE_EMPH_LEVEL_0 |
DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
- retval = exynos_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
- lane_count, buf);
+ retval = analogix_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
+ lane_count, buf);
return retval;
}
-static unsigned char exynos_dp_get_lane_status(u8 link_status[2], int lane)
+static unsigned char analogix_dp_get_lane_status(u8 link_status[2], int lane)
{
int shift = (lane & 1) * 4;
u8 link_value = link_status[lane >> 1];
@@ -354,21 +349,21 @@ static unsigned char exynos_dp_get_lane_status(u8 link_status[2], int lane)
return (link_value >> shift) & 0xf;
}
-static int exynos_dp_clock_recovery_ok(u8 link_status[2], int lane_count)
+static int analogix_dp_clock_recovery_ok(u8 link_status[2], int lane_count)
{
int lane;
u8 lane_status;
for (lane = 0; lane < lane_count; lane++) {
- lane_status = exynos_dp_get_lane_status(link_status, lane);
+ lane_status = analogix_dp_get_lane_status(link_status, lane);
if ((lane_status & DP_LANE_CR_DONE) == 0)
return -EINVAL;
}
return 0;
}
-static int exynos_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
- int lane_count)
+static int analogix_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
+ int lane_count)
{
int lane;
u8 lane_status;
@@ -377,7 +372,7 @@ static int exynos_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
return -EINVAL;
for (lane = 0; lane < lane_count; lane++) {
- lane_status = exynos_dp_get_lane_status(link_status, lane);
+ lane_status = analogix_dp_get_lane_status(link_status, lane);
lane_status &= DP_CHANNEL_EQ_BITS;
if (lane_status != DP_CHANNEL_EQ_BITS)
return -EINVAL;
@@ -386,8 +381,8 @@ static int exynos_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
return 0;
}
-static unsigned char exynos_dp_get_adjust_request_voltage(u8 adjust_request[2],
- int lane)
+static unsigned char
+analogix_dp_get_adjust_request_voltage(u8 adjust_request[2], int lane)
{
int shift = (lane & 1) * 4;
u8 link_value = adjust_request[lane >> 1];
@@ -395,7 +390,7 @@ static unsigned char exynos_dp_get_adjust_request_voltage(u8 adjust_request[2],
return (link_value >> shift) & 0x3;
}
-static unsigned char exynos_dp_get_adjust_request_pre_emphasis(
+static unsigned char analogix_dp_get_adjust_request_pre_emphasis(
u8 adjust_request[2],
int lane)
{
@@ -405,45 +400,45 @@ static unsigned char exynos_dp_get_adjust_request_pre_emphasis(
return ((link_value >> shift) & 0xc) >> 2;
}
-static void exynos_dp_set_lane_link_training(struct exynos_dp_device *dp,
- u8 training_lane_set, int lane)
+static void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp,
+ u8 training_lane_set, int lane)
{
switch (lane) {
case 0:
- exynos_dp_set_lane0_link_training(dp, training_lane_set);
+ analogix_dp_set_lane0_link_training(dp, training_lane_set);
break;
case 1:
- exynos_dp_set_lane1_link_training(dp, training_lane_set);
+ analogix_dp_set_lane1_link_training(dp, training_lane_set);
break;
case 2:
- exynos_dp_set_lane2_link_training(dp, training_lane_set);
+ analogix_dp_set_lane2_link_training(dp, training_lane_set);
break;
case 3:
- exynos_dp_set_lane3_link_training(dp, training_lane_set);
+ analogix_dp_set_lane3_link_training(dp, training_lane_set);
break;
}
}
-static unsigned int exynos_dp_get_lane_link_training(
- struct exynos_dp_device *dp,
+static unsigned int analogix_dp_get_lane_link_training(
+ struct analogix_dp_device *dp,
int lane)
{
u32 reg;
switch (lane) {
case 0:
- reg = exynos_dp_get_lane0_link_training(dp);
+ reg = analogix_dp_get_lane0_link_training(dp);
break;
case 1:
- reg = exynos_dp_get_lane1_link_training(dp);
+ reg = analogix_dp_get_lane1_link_training(dp);
break;
case 2:
- reg = exynos_dp_get_lane2_link_training(dp);
+ reg = analogix_dp_get_lane2_link_training(dp);
break;
case 3:
- reg = exynos_dp_get_lane3_link_training(dp);
+ reg = analogix_dp_get_lane3_link_training(dp);
break;
default:
WARN_ON(1);
@@ -453,25 +448,25 @@ static unsigned int exynos_dp_get_lane_link_training(
return reg;
}
-static void exynos_dp_reduce_link_rate(struct exynos_dp_device *dp)
+static void analogix_dp_reduce_link_rate(struct analogix_dp_device *dp)
{
- exynos_dp_training_pattern_dis(dp);
- exynos_dp_set_enhanced_mode(dp);
+ analogix_dp_training_pattern_dis(dp);
+ analogix_dp_set_enhanced_mode(dp);
dp->link_train.lt_state = FAILED;
}
-static void exynos_dp_get_adjust_training_lane(struct exynos_dp_device *dp,
- u8 adjust_request[2])
+static void analogix_dp_get_adjust_training_lane(struct analogix_dp_device *dp,
+ u8 adjust_request[2])
{
int lane, lane_count;
u8 voltage_swing, pre_emphasis, training_lane;
lane_count = dp->link_train.lane_count;
for (lane = 0; lane < lane_count; lane++) {
- voltage_swing = exynos_dp_get_adjust_request_voltage(
+ voltage_swing = analogix_dp_get_adjust_request_voltage(
adjust_request, lane);
- pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
+ pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis(
adjust_request, lane);
training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) |
DPCD_PRE_EMPHASIS_SET(pre_emphasis);
@@ -485,7 +480,7 @@ static void exynos_dp_get_adjust_training_lane(struct exynos_dp_device *dp,
}
}
-static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
+static int analogix_dp_process_clock_recovery(struct analogix_dp_device *dp)
{
int lane, lane_count, retval;
u8 voltage_swing, pre_emphasis, training_lane;
@@ -495,24 +490,24 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
lane_count = dp->link_train.lane_count;
- retval = exynos_dp_read_bytes_from_dpcd(dp, DP_LANE0_1_STATUS,
- 2, link_status);
+ retval = analogix_dp_read_bytes_from_dpcd(
+ dp, DP_LANE0_1_STATUS, 2, link_status);
if (retval)
return retval;
- retval = exynos_dp_read_bytes_from_dpcd(dp, DP_ADJUST_REQUEST_LANE0_1,
- 2, adjust_request);
+ retval = analogix_dp_read_bytes_from_dpcd(
+ dp, DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request);
if (retval)
return retval;
- if (exynos_dp_clock_recovery_ok(link_status, lane_count) == 0) {
+ if (analogix_dp_clock_recovery_ok(link_status, lane_count) == 0) {
/* set training pattern 2 for EQ */
- exynos_dp_set_training_pattern(dp, TRAINING_PTN2);
+ analogix_dp_set_training_pattern(dp, TRAINING_PTN2);
- retval = exynos_dp_write_byte_to_dpcd(
- dp, DP_TRAINING_PATTERN_SET,
- DP_LINK_SCRAMBLING_DISABLE |
- DP_TRAINING_PATTERN_2);
+ retval = analogix_dp_write_byte_to_dpcd(
+ dp, DP_TRAINING_PATTERN_SET,
+ DP_LINK_SCRAMBLING_DISABLE |
+ DP_TRAINING_PATTERN_2);
if (retval)
return retval;
@@ -520,12 +515,12 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
dp->link_train.lt_state = EQUALIZER_TRAINING;
} else {
for (lane = 0; lane < lane_count; lane++) {
- training_lane = exynos_dp_get_lane_link_training(
+ training_lane = analogix_dp_get_lane_link_training(
dp, lane);
- voltage_swing = exynos_dp_get_adjust_request_voltage(
- adjust_request, lane);
- pre_emphasis = exynos_dp_get_adjust_request_pre_emphasis(
+ voltage_swing = analogix_dp_get_adjust_request_voltage(
adjust_request, lane);
+ pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis(
+ adjust_request, lane);
if (DPCD_VOLTAGE_SWING_GET(training_lane) ==
voltage_swing &&
@@ -539,19 +534,19 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
dev_err(dp->dev, "CR Max reached (%d,%d,%d)\n",
dp->link_train.cr_loop[lane],
voltage_swing, pre_emphasis);
- exynos_dp_reduce_link_rate(dp);
+ analogix_dp_reduce_link_rate(dp);
return -EIO;
}
}
}
- exynos_dp_get_adjust_training_lane(dp, adjust_request);
+ analogix_dp_get_adjust_training_lane(dp, adjust_request);
for (lane = 0; lane < lane_count; lane++)
- exynos_dp_set_lane_link_training(
+ analogix_dp_set_lane_link_training(
dp, dp->link_train.training_lane[lane], lane);
- retval = exynos_dp_write_bytes_to_dpcd(
+ retval = analogix_dp_write_bytes_to_dpcd(
dp, DP_TRAINING_LANE0_SET, lane_count,
dp->link_train.training_lane);
if (retval)
@@ -560,7 +555,7 @@ static int exynos_dp_process_clock_recovery(struct exynos_dp_device *dp)
return retval;
}
-static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
+static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp)
{
int lane, lane_count, retval;
u32 reg;
@@ -570,46 +565,46 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
lane_count = dp->link_train.lane_count;
- retval = exynos_dp_read_bytes_from_dpcd(dp, DP_LANE0_1_STATUS,
- 2, link_status);
+ retval = analogix_dp_read_bytes_from_dpcd(dp, DP_LANE0_1_STATUS,
+ 2, link_status);
if (retval)
return retval;
- if (exynos_dp_clock_recovery_ok(link_status, lane_count)) {
- exynos_dp_reduce_link_rate(dp);
+ if (analogix_dp_clock_recovery_ok(link_status, lane_count)) {
+ analogix_dp_reduce_link_rate(dp);
return -EIO;
}
- retval = exynos_dp_read_bytes_from_dpcd(dp, DP_ADJUST_REQUEST_LANE0_1,
- 2, adjust_request);
+ retval = analogix_dp_read_bytes_from_dpcd(dp, DP_ADJUST_REQUEST_LANE0_1,
+ 2, adjust_request);
if (retval)
return retval;
- retval = exynos_dp_read_byte_from_dpcd(
+ retval = analogix_dp_read_byte_from_dpcd(
dp, DP_LANE_ALIGN_STATUS_UPDATED, &link_align);
if (retval)
return retval;
- exynos_dp_get_adjust_training_lane(dp, adjust_request);
+ analogix_dp_get_adjust_training_lane(dp, adjust_request);
- if (!exynos_dp_channel_eq_ok(link_status, link_align, lane_count)) {
+ if (!analogix_dp_channel_eq_ok(link_status, link_align, lane_count)) {
/* traing pattern Set to Normal */
- exynos_dp_training_pattern_dis(dp);
+ analogix_dp_training_pattern_dis(dp);
dev_info(dp->dev, "Link Training success!\n");
- exynos_dp_get_link_bandwidth(dp, ®);
+ analogix_dp_get_link_bandwidth(dp, ®);
dp->link_train.link_rate = reg;
dev_dbg(dp->dev, "final bandwidth = %.2x\n",
dp->link_train.link_rate);
- exynos_dp_get_lane_count(dp, ®);
+ analogix_dp_get_lane_count(dp, ®);
dp->link_train.lane_count = reg;
dev_dbg(dp->dev, "final lane count = %.2x\n",
dp->link_train.lane_count);
/* set enhanced mode if available */
- exynos_dp_set_enhanced_mode(dp);
+ analogix_dp_set_enhanced_mode(dp);
dp->link_train.lt_state = FINISHED;
return 0;
@@ -620,23 +615,23 @@ static int exynos_dp_process_equalizer_training(struct exynos_dp_device *dp)
if (dp->link_train.eq_loop > MAX_EQ_LOOP) {
dev_err(dp->dev, "EQ Max loop\n");
- exynos_dp_reduce_link_rate(dp);
+ analogix_dp_reduce_link_rate(dp);
return -EIO;
}
for (lane = 0; lane < lane_count; lane++)
- exynos_dp_set_lane_link_training(
+ analogix_dp_set_lane_link_training(
dp, dp->link_train.training_lane[lane], lane);
- retval = exynos_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
- lane_count,
- dp->link_train.training_lane);
+ retval = analogix_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
+ lane_count,
+ dp->link_train.training_lane);
return retval;
}
-static void exynos_dp_get_max_rx_bandwidth(struct exynos_dp_device *dp,
- u8 *bandwidth)
+static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
+ u8 *bandwidth)
{
u8 data;
@@ -644,12 +639,12 @@ static void exynos_dp_get_max_rx_bandwidth(struct exynos_dp_device *dp,
* For DP rev.1.1, Maximum link rate of Main Link lanes
* 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
*/
- exynos_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
+ analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data);
*bandwidth = data;
}
-static void exynos_dp_get_max_rx_lane_count(struct exynos_dp_device *dp,
- u8 *lane_count)
+static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp,
+ u8 *lane_count)
{
u8 data;
@@ -657,23 +652,23 @@ static void exynos_dp_get_max_rx_lane_count(struct exynos_dp_device *dp,
* For DP rev.1.1, Maximum number of Main Link lanes
* 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
*/
- exynos_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data);
+ analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data);
*lane_count = DPCD_MAX_LANE_COUNT(data);
}
-static void exynos_dp_init_training(struct exynos_dp_device *dp,
- enum link_lane_count_type max_lane,
- enum link_rate_type max_rate)
+static void analogix_dp_init_training(struct analogix_dp_device *dp,
+ enum link_lane_count_type max_lane,
+ enum link_rate_type max_rate)
{
/*
* MACRO_RST must be applied after the PLL_LOCK to avoid
* the DP inter pair skew issue for at least 10 us
*/
- exynos_dp_reset_macro(dp);
+ analogix_dp_reset_macro(dp);
/* Initialize by reading RX's DPCD */
- exynos_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
- exynos_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
+ analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
+ analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) &&
(dp->link_train.link_rate != LINK_RATE_2_70GBPS)) {
@@ -695,10 +690,10 @@ static void exynos_dp_init_training(struct exynos_dp_device *dp,
dp->link_train.link_rate = max_rate;
/* All DP analog module power up */
- exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
+ analogix_dp_set_analog_power_down(dp, POWER_ALL, 0);
}
-static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
+static int analogix_dp_sw_link_training(struct analogix_dp_device *dp)
{
int retval = 0, training_finished = 0;
@@ -708,17 +703,17 @@ static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
while (!retval && !training_finished) {
switch (dp->link_train.lt_state) {
case START:
- retval = exynos_dp_link_start(dp);
+ retval = analogix_dp_link_start(dp);
if (retval)
dev_err(dp->dev, "LT link start failed!\n");
break;
case CLOCK_RECOVERY:
- retval = exynos_dp_process_clock_recovery(dp);
+ retval = analogix_dp_process_clock_recovery(dp);
if (retval)
dev_err(dp->dev, "LT CR failed!\n");
break;
case EQUALIZER_TRAINING:
- retval = exynos_dp_process_equalizer_training(dp);
+ retval = analogix_dp_process_equalizer_training(dp);
if (retval)
dev_err(dp->dev, "LT EQ failed!\n");
break;
@@ -735,15 +730,15 @@ static int exynos_dp_sw_link_training(struct exynos_dp_device *dp)
return retval;
}
-static int exynos_dp_set_link_train(struct exynos_dp_device *dp,
- u32 count, u32 bwtype)
+static int analogix_dp_set_link_train(struct analogix_dp_device *dp,
+ u32 count, u32 bwtype)
{
int i;
int retval;
for (i = 0; i < DP_TIMEOUT_LOOP_COUNT; i++) {
- exynos_dp_init_training(dp, count, bwtype);
- retval = exynos_dp_sw_link_training(dp);
+ analogix_dp_init_training(dp, count, bwtype);
+ retval = analogix_dp_sw_link_training(dp);
if (retval == 0)
break;
@@ -753,24 +748,24 @@ static int exynos_dp_set_link_train(struct exynos_dp_device *dp,
return retval;
}
-static int exynos_dp_config_video(struct exynos_dp_device *dp)
+static int analogix_dp_config_video(struct analogix_dp_device *dp)
{
int retval = 0;
int timeout_loop = 0;
int done_count = 0;
- exynos_dp_config_video_slave_mode(dp);
+ analogix_dp_config_video_slave_mode(dp);
- exynos_dp_set_video_color_format(dp);
+ analogix_dp_set_video_color_format(dp);
- if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+ if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
dev_err(dp->dev, "PLL is not locked yet.\n");
return -EINVAL;
}
for (;;) {
timeout_loop++;
- if (exynos_dp_is_slave_video_stream_clock_on(dp) == 0)
+ if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
break;
if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
dev_err(dp->dev, "Timeout of video streamclk ok\n");
@@ -781,25 +776,25 @@ static int exynos_dp_config_video(struct exynos_dp_device *dp)
}
/* Set to use the register calculated M/N video */
- exynos_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
+ analogix_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
/* For video bist, Video timing must be generated by register */
- exynos_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE);
+ analogix_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE);
/* Disable video mute */
- exynos_dp_enable_video_mute(dp, 0);
+ analogix_dp_enable_video_mute(dp, 0);
/* Configure video slave mode */
- exynos_dp_enable_video_master(dp, 0);
+ analogix_dp_enable_video_master(dp, 0);
/* Enable video */
- exynos_dp_start_video(dp);
+ analogix_dp_start_video(dp);
timeout_loop = 0;
for (;;) {
timeout_loop++;
- if (exynos_dp_is_video_stream_on(dp) == 0) {
+ if (analogix_dp_is_video_stream_on(dp) == 0) {
done_count++;
if (done_count > 10)
break;
@@ -820,45 +815,46 @@ static int exynos_dp_config_video(struct exynos_dp_device *dp)
return retval;
}
-static void exynos_dp_enable_scramble(struct exynos_dp_device *dp, bool enable)
+static void analogix_dp_enable_scramble(struct analogix_dp_device *dp,
+ bool enable)
{
u8 data;
if (enable) {
- exynos_dp_enable_scrambling(dp);
+ analogix_dp_enable_scrambling(dp);
- exynos_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET,
- &data);
- exynos_dp_write_byte_to_dpcd(
- dp, DP_TRAINING_PATTERN_SET,
- (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE));
+ analogix_dp_read_byte_from_dpcd(
+ dp, DP_TRAINING_PATTERN_SET, &data);
+ analogix_dp_write_byte_to_dpcd(
+ dp, DP_TRAINING_PATTERN_SET,
+ (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE));
} else {
- exynos_dp_disable_scrambling(dp);
+ analogix_dp_disable_scrambling(dp);
- exynos_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET,
- &data);
- exynos_dp_write_byte_to_dpcd(
+ analogix_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET,
+ &data);
+ analogix_dp_write_byte_to_dpcd(
dp, DP_TRAINING_PATTERN_SET,
(u8)(data | DP_LINK_SCRAMBLING_DISABLE));
}
}
-static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
+static irqreturn_t analogix_dp_irq_handler(int irq, void *arg)
{
- struct exynos_dp_device *dp = arg;
+ struct analogix_dp_device *dp = arg;
enum dp_irq_type irq_type;
- irq_type = exynos_dp_get_irq_type(dp);
+ irq_type = analogix_dp_get_irq_type(dp);
switch (irq_type) {
case DP_IRQ_TYPE_HP_CABLE_IN:
dev_dbg(dp->dev, "Received irq - cable in\n");
schedule_work(&dp->hotplug_work);
- exynos_dp_clear_hotplug_interrupts(dp);
+ analogix_dp_clear_hotplug_interrupts(dp);
break;
case DP_IRQ_TYPE_HP_CABLE_OUT:
dev_dbg(dp->dev, "Received irq - cable out\n");
- exynos_dp_clear_hotplug_interrupts(dp);
+ analogix_dp_clear_hotplug_interrupts(dp);
break;
case DP_IRQ_TYPE_HP_CHANGE:
/*
@@ -867,7 +863,7 @@ static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
* only handle cable changes.
*/
dev_dbg(dp->dev, "Received irq - hotplug change; ignoring.\n");
- exynos_dp_clear_hotplug_interrupts(dp);
+ analogix_dp_clear_hotplug_interrupts(dp);
break;
default:
dev_err(dp->dev, "Received irq - unknown type!\n");
@@ -876,94 +872,93 @@ static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
-static void exynos_dp_hotplug(struct work_struct *work)
+static void analogix_dp_hotplug(struct work_struct *work)
{
- struct exynos_dp_device *dp;
+ struct analogix_dp_device *dp;
- dp = container_of(work, struct exynos_dp_device, hotplug_work);
+ dp = container_of(work, struct analogix_dp_device, hotplug_work);
if (dp->drm_dev)
drm_helper_hpd_irq_event(dp->drm_dev);
}
-static void exynos_dp_commit(struct exynos_drm_display *display)
+static void analogix_dp_commit(struct analogix_dp_device *dp)
{
- struct exynos_dp_device *dp = display_to_dp(display);
int ret;
/* Keep the panel disabled while we configure video */
- if (dp->panel) {
- if (drm_panel_disable(dp->panel))
+ if (dp->plat_data && dp->plat_data->panel) {
+ if (drm_panel_disable(dp->plat_data->panel))
DRM_ERROR("failed to disable the panel\n");
}
- ret = exynos_dp_detect_hpd(dp);
+ ret = analogix_dp_detect_hpd(dp);
if (ret) {
/* Cable has been disconnected, we're done */
return;
}
- ret = exynos_dp_handle_edid(dp);
+ ret = analogix_dp_handle_edid(dp);
if (ret) {
dev_err(dp->dev, "unable to handle edid\n");
return;
}
- ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
- dp->video_info->link_rate);
+ ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
+ dp->video_info->link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
}
- exynos_dp_enable_scramble(dp, 1);
- exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
- exynos_dp_enable_enhanced_mode(dp, 1);
+ analogix_dp_enable_scramble(dp, 1);
+ analogix_dp_enable_rx_to_enhanced_mode(dp, 1);
+ analogix_dp_enable_enhanced_mode(dp, 1);
- exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
- exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
+ analogix_dp_set_lane_count(dp, dp->video_info->lane_count);
+ analogix_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
- exynos_dp_init_video(dp);
- ret = exynos_dp_config_video(dp);
+ analogix_dp_init_video(dp);
+ ret = analogix_dp_config_video(dp);
if (ret)
dev_err(dp->dev, "unable to config video\n");
/* Safe to enable the panel now */
- if (dp->panel) {
- if (drm_panel_enable(dp->panel))
+ if (dp->plat_data && dp->plat_data->panel) {
+ if (drm_panel_enable(dp->plat_data->panel))
DRM_ERROR("failed to enable the panel\n");
}
}
-static enum drm_connector_status exynos_dp_detect(
+static enum drm_connector_status analogix_dp_detect(
struct drm_connector *connector, bool force)
{
return connector_status_connected;
}
-static void exynos_dp_connector_destroy(struct drm_connector *connector)
+static void analogix_dp_connector_destroy(struct drm_connector *connector)
{
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
}
-static struct drm_connector_funcs exynos_dp_connector_funcs = {
+static struct drm_connector_funcs analogix_dp_connector_funcs = {
.dpms = drm_atomic_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
- .detect = exynos_dp_detect,
- .destroy = exynos_dp_connector_destroy,
+ .detect = analogix_dp_detect,
+ .destroy = analogix_dp_connector_destroy,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
-static int exynos_dp_get_modes(struct drm_connector *connector)
+static int analogix_dp_get_modes(struct drm_connector *connector)
{
- struct exynos_dp_device *dp = ctx_from_connector(connector);
+ struct analogix_dp_device *dp = connector_to_dp(connector);
struct drm_display_mode *mode;
- if (dp->panel)
- return drm_panel_get_modes(dp->panel);
+ if (dp->plat_data && dp->plat_data->panel)
+ return drm_panel_get_modes(dp->plat_data->panel);
mode = drm_mode_create(connector->dev);
if (!mode) {
@@ -984,64 +979,60 @@ static int exynos_dp_get_modes(struct drm_connector *connector)
return 1;
}
-static struct drm_encoder *exynos_dp_best_encoder(
+static struct drm_encoder *analogix_dp_best_encoder(
struct drm_connector *connector)
{
- struct exynos_dp_device *dp = ctx_from_connector(connector);
+ struct analogix_dp_device *dp = connector_to_dp(connector);
return dp->encoder;
}
-static struct drm_connector_helper_funcs exynos_dp_connector_helper_funcs = {
- .get_modes = exynos_dp_get_modes,
- .best_encoder = exynos_dp_best_encoder,
+static struct drm_connector_helper_funcs analogix_dp_connector_helper_funcs = {
+ .get_modes = analogix_dp_get_modes,
+ .best_encoder = analogix_dp_best_encoder,
};
-static void exynos_dp_phy_init(struct exynos_dp_device *dp)
+static void analogix_dp_phy_init(struct analogix_dp_device *dp)
{
if (dp->phy)
phy_power_on(dp->phy);
}
-static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
+static void analogix_dp_phy_exit(struct analogix_dp_device *dp)
{
if (dp->phy)
phy_power_off(dp->phy);
}
-static void exynos_dp_poweron(struct exynos_dp_device *dp)
+static void analogix_dp_poweron(struct analogix_dp_device *dp)
{
- struct exynos_drm_crtc *crtc = dp_to_crtc(dp);
-
if (dp->dpms_mode == DRM_MODE_DPMS_ON)
return;
- if (dp->panel) {
- if (drm_panel_prepare(dp->panel)) {
+ if (dp->plat_data && dp->plat_data->panel) {
+ if (drm_panel_prepare(dp->plat_data->panel)) {
DRM_ERROR("failed to setup the panel\n");
return;
}
}
- if (crtc->ops->clock_enable)
- crtc->ops->clock_enable(dp_to_crtc(dp), true);
+ if (dp->plat_data && dp->plat_data->power_on)
+ dp->plat_data->power_on(dp->plat_data);
clk_prepare_enable(dp->clock);
- exynos_dp_phy_init(dp);
- exynos_dp_init_dp(dp);
+ analogix_dp_phy_init(dp);
+ analogix_dp_init_dp(dp);
enable_irq(dp->irq);
- exynos_dp_commit(&dp->display);
+ analogix_dp_commit(dp);
}
-static void exynos_dp_poweroff(struct exynos_dp_device *dp)
+static void analogix_dp_poweroff(struct analogix_dp_device *dp)
{
- struct exynos_drm_crtc *crtc = dp_to_crtc(dp);
-
if (dp->dpms_mode != DRM_MODE_DPMS_ON)
return;
- if (dp->panel) {
- if (drm_panel_disable(dp->panel)) {
+ if (dp->plat_data && dp->plat_data->panel) {
+ if (drm_panel_disable(dp->plat_data->panel)) {
DRM_ERROR("failed to disable the panel\n");
return;
}
@@ -1049,39 +1040,21 @@ static void exynos_dp_poweroff(struct exynos_dp_device *dp)
disable_irq(dp->irq);
flush_work(&dp->hotplug_work);
- exynos_dp_phy_exit(dp);
+ analogix_dp_phy_exit(dp);
clk_disable_unprepare(dp->clock);
- if (crtc->ops->clock_enable)
- crtc->ops->clock_enable(dp_to_crtc(dp), false);
+ if (dp->plat_data && dp->plat_data->power_off)
+ dp->plat_data->power_off(dp->plat_data);
- if (dp->panel) {
- if (drm_panel_unprepare(dp->panel))
+ if (dp->plat_data && dp->plat_data->panel) {
+ if (drm_panel_unprepare(dp->plat_data->panel))
DRM_ERROR("failed to turnoff the panel\n");
}
}
-/* returns the number of bridges attached */
-static int exynos_drm_attach_lcd_bridge(struct exynos_dp_device *dp,
- struct drm_encoder *encoder)
+static int analogix_dp_bridge_attach(struct drm_bridge *bridge)
{
- int ret;
-
- dp->bridge->next = dp->ptn_bridge;
- dp->bridge->encoder = encoder;
- ret = drm_bridge_attach(encoder->dev, dp->bridge);
- if (ret) {
- DRM_ERROR("Failed to attach ptn bridge to drm\n");
- return ret;
- }
-
- return 0;
-}
-
-static int exynos_dp_bridge_attach(struct drm_bridge *bridge)
-{
-
- struct exynos_dp_device *dp = bridge->driver_private;
+ struct analogix_dp_device *dp = bridge->driver_private;
struct drm_encoder *encoder = dp->encoder;
struct drm_connector *connector = &dp->connector;
int ret;
@@ -1093,66 +1066,77 @@ static int exynos_dp_bridge_attach(struct drm_bridge *bridge)
encoder->bridge = bridge;
- /* Pre-empt DP connector creation if there's a bridge */
- if (dp->ptn_bridge) {
- ret = exynos_drm_attach_lcd_bridge(dp, encoder);
- if (ret)
- return -ENODEV;
- }
-
connector->polled = DRM_CONNECTOR_POLL_HPD;
ret = drm_connector_init(dp->drm_dev, connector,
- &exynos_dp_connector_funcs, DRM_MODE_CONNECTOR_eDP);
+ &analogix_dp_connector_funcs,
+ DRM_MODE_CONNECTOR_eDP);
if (ret) {
DRM_ERROR("Failed to initialize connector with drm\n");
return ret;
}
- drm_connector_helper_add(connector, &exynos_dp_connector_helper_funcs);
+ drm_connector_helper_add(connector,
+ &analogix_dp_connector_helper_funcs);
drm_connector_register(connector);
drm_mode_connector_attach_encoder(connector, encoder);
- if (dp->panel)
- ret = drm_panel_attach(dp->panel, &dp->connector);
+ if (dp->plat_data && dp->plat_data->panel) {
+ ret = drm_panel_attach(dp->plat_data->panel, &dp->connector);
+ if (ret) {
+ DRM_ERROR("Failed to attach panel\n");
+ return ret;
+ }
+ }
+
+ /*
+ * This should be the end of attach function, caused
+ * we should ensure dp bridge could attach first.
+ */
+ if (dp->plat_data && dp->plat_data->attach) {
+ ret = dp->plat_data->attach(dp->plat_data, bridge);
+ if (ret) {
+ DRM_ERROR("Failed at platform attch func\n");
+ return ret;
+ }
+ }
- return ret;
+ return 0;
}
-static void exynos_dp_bridge_nop(struct drm_bridge *bridge)
+static void analogix_dp_bridge_nop(struct drm_bridge *bridge)
{
/* do nothing */
}
-static void exynos_dp_bridge_enable(struct drm_bridge *bridge)
+static void analogix_dp_bridge_enable(struct drm_bridge *bridge)
{
- struct exynos_dp_device *dp = bridge->driver_private;
+ struct analogix_dp_device *dp = bridge->driver_private;
- exynos_dp_poweron(dp);
+ analogix_dp_poweron(dp);
dp->dpms_mode = DRM_MODE_DPMS_ON;
}
-static void exynos_dp_bridge_disable(struct drm_bridge *bridge)
+static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
{
- struct exynos_dp_device *dp = bridge->driver_private;
+ struct analogix_dp_device *dp = bridge->driver_private;
- exynos_dp_poweroff(dp);
+ analogix_dp_poweroff(dp);
dp->dpms_mode = DRM_MODE_DPMS_OFF;
}
-static const struct drm_bridge_funcs exynos_dp_bridge_funcs = {
- .enable = exynos_dp_bridge_enable,
- .disable = exynos_dp_bridge_disable,
- .pre_enable = exynos_dp_bridge_nop,
- .post_disable = exynos_dp_bridge_nop,
- .attach = exynos_dp_bridge_attach,
+static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
+ .enable = analogix_dp_bridge_enable,
+ .disable = analogix_dp_bridge_disable,
+ .pre_enable = analogix_dp_bridge_nop,
+ .post_disable = analogix_dp_bridge_nop,
+ .attach = analogix_dp_bridge_attach,
};
-static int exynos_dp_create_connector(struct exynos_drm_display *display,
- struct drm_encoder *encoder)
+static int analogix_dp_bridge_register(struct drm_device *drm_dev,
+ struct analogix_dp_device *dp)
+
{
- struct exynos_dp_device *dp = display_to_dp(display);
- struct drm_device *drm_dev = dp->drm_dev;
struct drm_bridge *bridge;
int ret;
@@ -1163,11 +1147,10 @@ static int exynos_dp_create_connector(struct exynos_drm_display *display,
}
dp->bridge = bridge;
- dp->encoder = encoder;
bridge->driver_private = dp;
bridge->encoder = dp->encoder;
- bridge->funcs = &exynos_dp_bridge_funcs;
+ bridge->funcs = &analogix_dp_bridge_funcs;
ret = drm_bridge_attach(drm_dev, bridge);
if (ret) {
@@ -1178,18 +1161,7 @@ static int exynos_dp_create_connector(struct exynos_drm_display *display,
return 0;
}
-static void exynos_dp_dpms(struct exynos_drm_display *display, int mode)
-{
- /* do nothing */
-}
-
-static struct exynos_drm_display_ops exynos_dp_display_ops = {
- .create_connector = exynos_dp_create_connector,
- .dpms = exynos_dp_dpms,
- .commit = exynos_dp_commit,
-};
-
-static struct video_info *exynos_dp_dt_parse_pdata(struct device *dev)
+static struct video_info *analogix_dp_dt_parse_pdata(struct device *dev)
{
struct device_node *dp_node = dev->of_node;
struct video_info *dp_video_config;
@@ -1247,7 +1219,7 @@ static struct video_info *exynos_dp_dt_parse_pdata(struct device *dev)
return dp_video_config;
}
-static int exynos_dp_dt_parse_panel(struct exynos_dp_device *dp)
+static int analogix_dp_dt_parse_panel(struct analogix_dp_device *dp)
{
int ret;
@@ -1260,19 +1232,33 @@ static int exynos_dp_dt_parse_panel(struct exynos_dp_device *dp)
return 0;
}
-static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
+int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
+ struct drm_encoder *encoder,
+ struct analogix_dp_plat_data *plat_data)
{
- struct exynos_dp_device *dp = dev_get_drvdata(dev);
struct platform_device *pdev = to_platform_device(dev);
- struct drm_device *drm_dev = data;
+ struct analogix_dp_device *dp;
struct resource *res;
unsigned int irq_flags;
int ret = 0;
+ dp = devm_kzalloc(dev, sizeof(struct analogix_dp_device), GFP_KERNEL);
+ if (!dp)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, dp);
+
dp->dev = &pdev->dev;
dp->dpms_mode = DRM_MODE_DPMS_OFF;
- dp->video_info = exynos_dp_dt_parse_pdata(&pdev->dev);
+ /*
+ * platform dp driver need containor_of the plat_data to get
+ * the driver private data, so we need to store the point of
+ * plat_data, not the context of plat_data.
+ */
+ dp->plat_data = plat_data;
+
+ dp->video_info = analogix_dp_dt_parse_pdata(&pdev->dev);
if (IS_ERR(dp->video_info))
return PTR_ERR(dp->video_info);
@@ -1292,8 +1278,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
}
}
- if (!dp->panel && !dp->ptn_bridge) {
- ret = exynos_dp_dt_parse_panel(dp);
+ if (!dp->plat_data || !dp->plat_data->panel) {
+ ret = analogix_dp_dt_parse_panel(dp);
if (ret)
return ret;
}
@@ -1341,14 +1327,14 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
return -ENODEV;
}
- INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
+ INIT_WORK(&dp->hotplug_work, analogix_dp_hotplug);
- exynos_dp_phy_init(dp);
+ analogix_dp_phy_init(dp);
- exynos_dp_init_dp(dp);
+ analogix_dp_init_dp(dp);
- ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler,
- irq_flags, "exynos-dp", dp);
+ ret = devm_request_irq(&pdev->dev, dp->irq, analogix_dp_irq_handler,
+ irq_flags, "analogix-dp", dp);
if (ret) {
dev_err(&pdev->dev, "failed to request irq\n");
return ret;
@@ -1356,108 +1342,38 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
disable_irq(dp->irq);
dp->drm_dev = drm_dev;
+ dp->encoder = encoder;
- return exynos_drm_create_enc_conn(drm_dev, &dp->display);
-}
-
-static void exynos_dp_unbind(struct device *dev, struct device *master,
- void *data)
-{
- struct exynos_dp_device *dp = dev_get_drvdata(dev);
-
- exynos_dp_bridge_disable(dp->bridge);
-}
-
-static const struct component_ops exynos_dp_ops = {
- .bind = exynos_dp_bind,
- .unbind = exynos_dp_unbind,
-};
-
-static int exynos_dp_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device_node *panel_node, *bridge_node, *endpoint;
- struct exynos_dp_device *dp;
-
- dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
- GFP_KERNEL);
- if (!dp)
- return -ENOMEM;
-
- dp->display.type = EXYNOS_DISPLAY_TYPE_LCD;
- dp->display.ops = &exynos_dp_display_ops;
- platform_set_drvdata(pdev, dp);
-
- panel_node = of_parse_phandle(dev->of_node, "panel", 0);
- if (panel_node) {
- dp->panel = of_drm_find_panel(panel_node);
- of_node_put(panel_node);
- if (!dp->panel)
- return -EPROBE_DEFER;
- }
-
- endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
- if (endpoint) {
- bridge_node = of_graph_get_remote_port_parent(endpoint);
- if (bridge_node) {
- dp->ptn_bridge = of_drm_find_bridge(bridge_node);
- of_node_put(bridge_node);
- if (!dp->ptn_bridge)
- return -EPROBE_DEFER;
- } else {
- return -EPROBE_DEFER;
- }
- }
-
- return component_add(&pdev->dev, &exynos_dp_ops);
+ return analogix_dp_bridge_register(drm_dev, dp);
}
+EXPORT_SYMBOL_GPL(analogix_dp_bind);
-static int exynos_dp_remove(struct platform_device *pdev)
+void analogix_dp_unbind(struct device *dev, struct device *master, void *data)
{
- component_del(&pdev->dev, &exynos_dp_ops);
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
- return 0;
+ analogix_dp_bridge_disable(dp->bridge);
}
+EXPORT_SYMBOL_GPL(analogix_dp_unbind);
-#ifdef CONFIG_PM_SLEEP
-static int exynos_dp_suspend(struct device *dev)
+int analogix_dp_suspend(struct device *dev)
{
- struct exynos_dp_device *dp = dev_get_drvdata(dev);
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
- exynos_dp_bridge_disable(dp->bridge);
+ analogix_dp_bridge_disable(dp->bridge);
return 0;
}
+EXPORT_SYMBOL_GPL(analogix_dp_suspend);
-static int exynos_dp_resume(struct device *dev)
+int analogix_dp_resume(struct device *dev)
{
- struct exynos_dp_device *dp = dev_get_drvdata(dev);
+ struct analogix_dp_device *dp = dev_get_drvdata(dev);
- exynos_dp_bridge_enable(dp->bridge);
+ analogix_dp_bridge_enable(dp->bridge);
return 0;
}
-#endif
-
-static const struct dev_pm_ops exynos_dp_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(exynos_dp_suspend, exynos_dp_resume)
-};
-
-static const struct of_device_id exynos_dp_match[] = {
- { .compatible = "samsung,exynos5-dp" },
- {},
-};
-MODULE_DEVICE_TABLE(of, exynos_dp_match);
-
-struct platform_driver dp_driver = {
- .probe = exynos_dp_probe,
- .remove = exynos_dp_remove,
- .driver = {
- .name = "exynos-dp",
- .owner = THIS_MODULE,
- .pm = &exynos_dp_pm_ops,
- .of_match_table = exynos_dp_match,
- },
-};
+EXPORT_SYMBOL_GPL(analogix_dp_resume);
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
-MODULE_DESCRIPTION("Samsung SoC DP Driver");
+MODULE_DESCRIPTION("Analogix Core DP Driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix_dp_core.h
new file mode 100644
index 0000000..713c57f
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.h
@@ -0,0 +1,285 @@
+/*
+ * Header file for Samsung DP (Display Port) interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _ANALOGIX_DP_CORE_H
+#define _ANALOGIX_DP_CORE_H
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/exynos_drm.h>
+
+#define DP_TIMEOUT_LOOP_COUNT 100
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 5
+
+enum link_rate_type {
+ LINK_RATE_1_62GBPS = 0x06,
+ LINK_RATE_2_70GBPS = 0x0a
+};
+
+enum link_lane_count_type {
+ LANE_COUNT1 = 1,
+ LANE_COUNT2 = 2,
+ LANE_COUNT4 = 4
+};
+
+enum link_training_state {
+ START,
+ CLOCK_RECOVERY,
+ EQUALIZER_TRAINING,
+ FINISHED,
+ FAILED
+};
+
+enum voltage_swing_level {
+ VOLTAGE_LEVEL_0,
+ VOLTAGE_LEVEL_1,
+ VOLTAGE_LEVEL_2,
+ VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+ PRE_EMPHASIS_LEVEL_0,
+ PRE_EMPHASIS_LEVEL_1,
+ PRE_EMPHASIS_LEVEL_2,
+ PRE_EMPHASIS_LEVEL_3,
+};
+
+enum pattern_set {
+ PRBS7,
+ D10_2,
+ TRAINING_PTN1,
+ TRAINING_PTN2,
+ DP_NONE
+};
+
+enum color_space {
+ COLOR_RGB,
+ COLOR_YCBCR422,
+ COLOR_YCBCR444
+};
+
+enum color_depth {
+ COLOR_6,
+ COLOR_8,
+ COLOR_10,
+ COLOR_12
+};
+
+enum color_coefficient {
+ COLOR_YCBCR601,
+ COLOR_YCBCR709
+};
+
+enum dynamic_range {
+ VESA,
+ CEA
+};
+
+enum pll_status {
+ PLL_UNLOCKED,
+ PLL_LOCKED
+};
+
+enum clock_recovery_m_value_type {
+ CALCULATED_M,
+ REGISTER_M
+};
+
+enum video_timing_recognition_type {
+ VIDEO_TIMING_FROM_CAPTURE,
+ VIDEO_TIMING_FROM_REGISTER
+};
+
+enum analog_power_block {
+ AUX_BLOCK,
+ CH0_BLOCK,
+ CH1_BLOCK,
+ CH2_BLOCK,
+ CH3_BLOCK,
+ ANALOG_TOTAL,
+ POWER_ALL
+};
+
+enum dp_irq_type {
+ DP_IRQ_TYPE_HP_CABLE_IN,
+ DP_IRQ_TYPE_HP_CABLE_OUT,
+ DP_IRQ_TYPE_HP_CHANGE,
+ DP_IRQ_TYPE_UNKNOWN,
+};
+
+struct video_info {
+ char *name;
+
+ bool h_sync_polarity;
+ bool v_sync_polarity;
+ bool interlaced;
+
+ enum color_space color_space;
+ enum dynamic_range dynamic_range;
+ enum color_coefficient ycbcr_coeff;
+ enum color_depth color_depth;
+
+ enum link_rate_type link_rate;
+ enum link_lane_count_type lane_count;
+};
+
+struct link_train {
+ int eq_loop;
+ int cr_loop[4];
+
+ u8 link_rate;
+ u8 lane_count;
+ u8 training_lane[4];
+
+ enum link_training_state lt_state;
+};
+
+struct analogix_dp_device {
+ struct device *dev;
+ struct drm_device *drm_dev;
+ struct drm_connector connector;
+ struct drm_encoder *encoder;
+ struct drm_bridge *bridge;
+ struct clk *clock;
+ unsigned int irq;
+ void __iomem *reg_base;
+
+ struct video_info *video_info;
+ struct link_train link_train;
+ struct work_struct hotplug_work;
+ struct phy *phy;
+ int dpms_mode;
+ int hpd_gpio;
+
+ struct analogix_dp_plat_data *plat_data;
+
+ struct exynos_drm_panel_info priv;
+};
+
+/* analogix_dp_reg.c */
+void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_stop_video(struct analogix_dp_device *dp);
+void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_init_analog_param(struct analogix_dp_device *dp);
+void analogix_dp_init_interrupt(struct analogix_dp_device *dp);
+void analogix_dp_reset(struct analogix_dp_device *dp);
+void analogix_dp_swreset(struct analogix_dp_device *dp);
+void analogix_dp_config_interrupt(struct analogix_dp_device *dp);
+enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp);
+void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
+ enum analog_power_block block,
+ bool enable);
+void analogix_dp_init_analog_func(struct analogix_dp_device *dp);
+void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
+void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
+void analogix_dp_reset_aux(struct analogix_dp_device *dp);
+void analogix_dp_init_aux(struct analogix_dp_device *dp);
+int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp);
+void analogix_dp_enable_sw_function(struct analogix_dp_device *dp);
+int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp);
+int analogix_dp_write_byte_to_dpcd(struct analogix_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned char data);
+int analogix_dp_read_byte_from_dpcd(struct analogix_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned char *data);
+int analogix_dp_write_bytes_to_dpcd(struct analogix_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[]);
+int analogix_dp_read_bytes_from_dpcd(struct analogix_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[]);
+int analogix_dp_select_i2c_device(struct analogix_dp_device *dp,
+ unsigned int device_addr,
+ unsigned int reg_addr);
+int analogix_dp_read_byte_from_i2c(struct analogix_dp_device *dp,
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int *data);
+int analogix_dp_read_bytes_from_i2c(struct analogix_dp_device *dp,
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char edid[]);
+void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype);
+void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype);
+void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count);
+void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count);
+void analogix_dp_enable_enhanced_mode(struct analogix_dp_device *dp,
+ bool enable);
+void analogix_dp_set_training_pattern(struct analogix_dp_device *dp,
+ enum pattern_set pattern);
+void analogix_dp_set_lane0_pre_emphasis(struct analogix_dp_device *dp,
+ u32 level);
+void analogix_dp_set_lane1_pre_emphasis(struct analogix_dp_device *dp,
+ u32 level);
+void analogix_dp_set_lane2_pre_emphasis(struct analogix_dp_device *dp,
+ u32 level);
+void analogix_dp_set_lane3_pre_emphasis(struct analogix_dp_device *dp,
+ u32 level);
+void analogix_dp_set_lane0_link_training(struct analogix_dp_device *dp,
+ u32 training_lane);
+void analogix_dp_set_lane1_link_training(struct analogix_dp_device *dp,
+ u32 training_lane);
+void analogix_dp_set_lane2_link_training(struct analogix_dp_device *dp,
+ u32 training_lane);
+void analogix_dp_set_lane3_link_training(struct analogix_dp_device *dp,
+ u32 training_lane);
+u32 analogix_dp_get_lane0_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane1_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane2_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane3_link_training(struct analogix_dp_device *dp);
+void analogix_dp_reset_macro(struct analogix_dp_device *dp);
+void analogix_dp_init_video(struct analogix_dp_device *dp);
+
+void analogix_dp_set_video_color_format(struct analogix_dp_device *dp);
+int analogix_dp_is_slave_video_stream_clock_on(struct analogix_dp_device *dp);
+void analogix_dp_set_video_cr_mn(struct analogix_dp_device *dp,
+ enum clock_recovery_m_value_type type,
+ u32 m_value, u32 n_value);
+void analogix_dp_set_video_timing_mode(struct analogix_dp_device *dp, u32 type);
+void analogix_dp_enable_video_master(struct analogix_dp_device *dp,
+ bool enable);
+void analogix_dp_start_video(struct analogix_dp_device *dp);
+int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp);
+void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp);
+void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
+void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
+
+/* I2C EDID Chip ID, Slave Address */
+#define I2C_EDID_DEVICE_ADDR 0x50
+#define I2C_E_EDID_DEVICE_ADDR 0x30
+
+#define EDID_BLOCK_LENGTH 0x80
+#define EDID_HEADER_PATTERN 0x00
+#define EDID_EXTENSION_FLAG 0x7e
+#define EDID_CHECKSUM 0x7f
+
+/* DP_MAX_LANE_COUNT */
+#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
+#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
+
+/* DP_LANE_COUNT_SET */
+#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
+
+/* DP_TRAINING_LANE0_SET */
+#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
+#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
+#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
+#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
+
+#endif /* _ANALOGIX_DP_CORE_H */
diff --git a/drivers/gpu/drm/bridge/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix_dp_reg.c
new file mode 100644
index 0000000..cc5cdbf
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix_dp_reg.c
@@ -0,0 +1,1265 @@
+/*
+ * Samsung DP (Display port) register interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include "analogix_dp_core.h"
+#include "analogix_dp_reg.h"
+
+#define COMMON_INT_MASK_1 0
+#define COMMON_INT_MASK_2 0
+#define COMMON_INT_MASK_3 0
+#define COMMON_INT_MASK_4 (HOTPLUG_CHG | HPD_LOST | PLUG)
+#define INT_STA_MASK INT_HPD
+
+void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable)
+{
+ u32 reg;
+
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+ reg |= HDCP_VIDEO_MUTE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+ reg &= ~HDCP_VIDEO_MUTE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+ }
+}
+
+void analogix_dp_stop_video(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+ reg &= ~VIDEO_EN;
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+}
+
+void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable)
+{
+ u32 reg;
+
+ if (enable)
+ reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
+ LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
+ else
+ reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
+ LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+
+ writel(reg, dp->reg_base + ANALOGIX_DP_LANE_MAP);
+}
+
+void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = TX_TERMINAL_CTRL_50_OHM;
+ writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_1);
+
+ reg = SEL_24M | TX_DVDD_BIT_1_0625V;
+ writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
+
+ reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
+ writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
+
+ reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM |
+ TX_CUR1_2X | TX_CUR_16_MA;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PLL_FILTER_CTL_1);
+
+ reg = CH3_AMP_400_MV | CH2_AMP_400_MV |
+ CH1_AMP_400_MV | CH0_AMP_400_MV;
+ writel(reg, dp->reg_base + ANALOGIX_DP_TX_AMP_TUNING_CTL);
+}
+
+void analogix_dp_init_interrupt(struct analogix_dp_device *dp)
+{
+ /* Set interrupt pin assertion polarity as high */
+ writel(INT_POL1 | INT_POL0, dp->reg_base + ANALOGIX_DP_INT_CTL);
+
+ /* Clear pending regisers */
+ writel(0xff, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+ writel(0x4f, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_2);
+ writel(0xe0, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_3);
+ writel(0xe7, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+ writel(0x63, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+ /* 0:mask,1: unmask */
+ writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_1);
+ writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_2);
+ writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_3);
+ writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+ writel(0x00, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+void analogix_dp_reset(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ analogix_dp_stop_video(dp);
+ analogix_dp_enable_video_mute(dp, 0);
+
+ reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
+ AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
+ HDCP_FUNC_EN_N | SW_FUNC_EN_N;
+ writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+
+ reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
+ SERDES_FIFO_FUNC_EN_N |
+ LS_CLK_DOMAIN_FUNC_EN_N;
+ writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+
+ usleep_range(20, 30);
+
+ analogix_dp_lane_swap(dp, 0);
+
+ writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+ writel(0x40, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+ writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+ writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+
+ writel(0x0, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+ writel(0x0, dp->reg_base + ANALOGIX_DP_HDCP_CTL);
+
+ writel(0x5e, dp->reg_base + ANALOGIX_DP_HPD_DEGLITCH_L);
+ writel(0x1a, dp->reg_base + ANALOGIX_DP_HPD_DEGLITCH_H);
+
+ writel(0x10, dp->reg_base + ANALOGIX_DP_LINK_DEBUG_CTL);
+
+ writel(0x0, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+
+ writel(0x0, dp->reg_base + ANALOGIX_DP_VIDEO_FIFO_THRD);
+ writel(0x20, dp->reg_base + ANALOGIX_DP_AUDIO_MARGIN);
+
+ writel(0x4, dp->reg_base + ANALOGIX_DP_M_VID_GEN_FILTER_TH);
+ writel(0x2, dp->reg_base + ANALOGIX_DP_M_AUD_GEN_FILTER_TH);
+
+ writel(0x00000101, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+}
+
+void analogix_dp_swreset(struct analogix_dp_device *dp)
+{
+ writel(RESET_DP_TX, dp->reg_base + ANALOGIX_DP_TX_SW_RESET);
+}
+
+void analogix_dp_config_interrupt(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ /* 0: mask, 1: unmask */
+ reg = COMMON_INT_MASK_1;
+ writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_1);
+
+ reg = COMMON_INT_MASK_2;
+ writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_2);
+
+ reg = COMMON_INT_MASK_3;
+ writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_3);
+
+ reg = COMMON_INT_MASK_4;
+ writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+
+ reg = INT_STA_MASK;
+ writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+ if (reg & PLL_LOCK)
+ return PLL_LOCKED;
+ else
+ return PLL_UNLOCKED;
+}
+
+void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable)
+{
+ u32 reg;
+
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
+ reg |= DP_PLL_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL);
+ reg &= ~DP_PLL_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL);
+ }
+}
+
+void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
+ enum analog_power_block block,
+ bool enable)
+{
+ u32 reg;
+
+ switch (block) {
+ case AUX_BLOCK:
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg |= AUX_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg &= ~AUX_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ }
+ break;
+ case CH0_BLOCK:
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg |= CH0_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg &= ~CH0_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ }
+ break;
+ case CH1_BLOCK:
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg |= CH1_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg &= ~CH1_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ }
+ break;
+ case CH2_BLOCK:
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg |= CH2_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg &= ~CH2_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ }
+ break;
+ case CH3_BLOCK:
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg |= CH3_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg &= ~CH3_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ }
+ break;
+ case ANALOG_TOTAL:
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg |= DP_PHY_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg &= ~DP_PHY_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ }
+ break;
+ case POWER_ALL:
+ if (enable) {
+ reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
+ CH1_PD | CH0_PD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ } else {
+ writel(0x00, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+void analogix_dp_init_analog_func(struct analogix_dp_device *dp)
+{
+ u32 reg;
+ int timeout_loop = 0;
+
+ analogix_dp_set_analog_power_down(dp, POWER_ALL, 0);
+
+ reg = PLL_LOCK_CHG;
+ writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+ reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
+ writel(reg, dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+
+ /* Power up PLL */
+ if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+ analogix_dp_set_pll_power_down(dp, 0);
+
+ while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+ timeout_loop++;
+ if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ dev_err(dp->dev, "failed to get pll lock status\n");
+ return;
+ }
+ usleep_range(10, 20);
+ }
+ }
+
+ /* Enable Serdes FIFO function and Link symbol clock domain module */
+ reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+ reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
+ | AUX_FUNC_EN_N);
+ writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+}
+
+void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ if (gpio_is_valid(dp->hpd_gpio))
+ return;
+
+ reg = HOTPLUG_CHG | HPD_LOST | PLUG;
+ writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+
+ reg = INT_HPD;
+ writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA);
+}
+
+void analogix_dp_init_hpd(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ if (gpio_is_valid(dp->hpd_gpio))
+ return;
+
+ analogix_dp_clear_hotplug_interrupts(dp);
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+ reg &= ~(F_HPD | HPD_CTRL);
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
+enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ if (gpio_is_valid(dp->hpd_gpio)) {
+ reg = gpio_get_value(dp->hpd_gpio);
+ if (reg)
+ return DP_IRQ_TYPE_HP_CABLE_IN;
+ else
+ return DP_IRQ_TYPE_HP_CABLE_OUT;
+ } else {
+ /* Parse hotplug interrupt status register */
+ reg = readl(dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+
+ if (reg & PLUG)
+ return DP_IRQ_TYPE_HP_CABLE_IN;
+
+ if (reg & HPD_LOST)
+ return DP_IRQ_TYPE_HP_CABLE_OUT;
+
+ if (reg & HOTPLUG_CHG)
+ return DP_IRQ_TYPE_HP_CHANGE;
+
+ return DP_IRQ_TYPE_UNKNOWN;
+ }
+}
+
+void analogix_dp_reset_aux(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ /* Disable AUX channel module */
+ reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+ reg |= AUX_FUNC_EN_N;
+ writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+}
+
+void analogix_dp_init_aux(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ /* Clear inerrupts related to AUX channel */
+ reg = RPLY_RECEIV | AUX_ERR;
+ writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+ analogix_dp_reset_aux(dp);
+
+ /* Disable AUX transaction H/W retry */
+ reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0) |
+ AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL);
+
+ /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+ reg = DEFER_CTRL_EN | DEFER_COUNT(1);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_DEFER_CTL);
+
+ /* Enable AUX channel module */
+ reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+ reg &= ~AUX_FUNC_EN_N;
+ writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+}
+
+int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ if (gpio_is_valid(dp->hpd_gpio)) {
+ if (gpio_get_value(dp->hpd_gpio))
+ return 0;
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+ if (reg & HPD_STATUS)
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+void analogix_dp_enable_sw_function(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+ reg &= ~SW_FUNC_EN_N;
+ writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+}
+
+int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp)
+{
+ int reg;
+ int retval = 0;
+ int timeout_loop = 0;
+
+ /* Enable AUX CH operation */
+ reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+ reg |= AUX_EN;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+
+ /* Is AUX CH command reply received? */
+ reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+ while (!(reg & RPLY_RECEIV)) {
+ timeout_loop++;
+ if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+ dev_err(dp->dev, "AUX CH command reply failed!\n");
+ return -ETIMEDOUT;
+ }
+ reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+ usleep_range(10, 11);
+ }
+
+ /* Clear interrupt source for AUX CH command reply */
+ writel(RPLY_RECEIV, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+ /* Clear interrupt source for AUX CH access error */
+ reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+ if (reg & AUX_ERR) {
+ writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
+ return -EREMOTEIO;
+ }
+
+ /* Check AUX CH error access status */
+ reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_STA);
+ if ((reg & AUX_STATUS_MASK) != 0) {
+ dev_err(dp->dev, "AUX CH error happens: %d\n\n",
+ reg & AUX_STATUS_MASK);
+ return -EREMOTEIO;
+ }
+
+ return retval;
+}
+
+int analogix_dp_write_byte_to_dpcd(struct analogix_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned char data)
+{
+ u32 reg;
+ int i;
+ int retval;
+
+ for (i = 0; i < 3; i++) {
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(reg_addr);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+ reg = AUX_ADDR_15_8(reg_addr);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+ reg = AUX_ADDR_19_16(reg_addr);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+ /* Write data buffer */
+ reg = (unsigned int)data;
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
+
+ /*
+ * Set DisplayPort transaction and write 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = analogix_dp_start_aux_transaction(dp);
+ if (retval == 0)
+ break;
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
+ }
+
+ return retval;
+}
+
+int analogix_dp_read_byte_from_dpcd(struct analogix_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned char *data)
+{
+ u32 reg;
+ int i;
+ int retval;
+
+ for (i = 0; i < 3; i++) {
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(reg_addr);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+ reg = AUX_ADDR_15_8(reg_addr);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+ reg = AUX_ADDR_19_16(reg_addr);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+ /*
+ * Set DisplayPort transaction and read 1 byte
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = analogix_dp_start_aux_transaction(dp);
+ if (retval == 0)
+ break;
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
+ }
+
+ /* Read data buffer */
+ reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
+ *data = (unsigned char)(reg & 0xff);
+
+ return retval;
+}
+
+int analogix_dp_write_bytes_to_dpcd(struct analogix_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[])
+{
+ u32 reg;
+ unsigned int start_offset;
+ unsigned int cur_data_count;
+ unsigned int cur_data_idx;
+ int i;
+ int retval = 0;
+
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+ start_offset = 0;
+ while (start_offset < count) {
+ /* Buffer size of AUX CH is 16 * 4bytes */
+ if ((count - start_offset) > 16)
+ cur_data_count = 16;
+ else
+ cur_data_count = count - start_offset;
+
+ for (i = 0; i < 3; i++) {
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(reg_addr + start_offset);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+ reg = AUX_ADDR_15_8(reg_addr + start_offset);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+ reg = AUX_ADDR_19_16(reg_addr + start_offset);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+ for (cur_data_idx = 0; cur_data_idx < cur_data_count;
+ cur_data_idx++) {
+ reg = data[start_offset + cur_data_idx];
+ writel(reg, dp->reg_base +
+ ANALOGIX_DP_BUF_DATA_0 +
+ 4 * cur_data_idx);
+ }
+
+ /*
+ * Set DisplayPort transaction and write
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_LENGTH(cur_data_count) |
+ AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = analogix_dp_start_aux_transaction(dp);
+ if (retval == 0)
+ break;
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
+ __func__);
+ }
+
+ start_offset += cur_data_count;
+ }
+
+ return retval;
+}
+
+int analogix_dp_read_bytes_from_dpcd(struct analogix_dp_device *dp,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char data[])
+{
+ u32 reg;
+ unsigned int start_offset;
+ unsigned int cur_data_count;
+ unsigned int cur_data_idx;
+ int i;
+ int retval = 0;
+
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+ start_offset = 0;
+ while (start_offset < count) {
+ /* Buffer size of AUX CH is 16 * 4bytes */
+ if ((count - start_offset) > 16)
+ cur_data_count = 16;
+ else
+ cur_data_count = count - start_offset;
+
+ /* AUX CH Request Transaction process */
+ for (i = 0; i < 3; i++) {
+ /* Select DPCD device address */
+ reg = AUX_ADDR_7_0(reg_addr + start_offset);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+ reg = AUX_ADDR_15_8(reg_addr + start_offset);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+ reg = AUX_ADDR_19_16(reg_addr + start_offset);
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+ /*
+ * Set DisplayPort transaction and read
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_LENGTH(cur_data_count) |
+ AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = analogix_dp_start_aux_transaction(dp);
+ if (retval == 0)
+ break;
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
+ __func__);
+ }
+
+ for (cur_data_idx = 0; cur_data_idx < cur_data_count;
+ cur_data_idx++) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0
+ + 4 * cur_data_idx);
+ data[start_offset + cur_data_idx] =
+ (unsigned char)reg;
+ }
+
+ start_offset += cur_data_count;
+ }
+
+ return retval;
+}
+
+int analogix_dp_select_i2c_device(struct analogix_dp_device *dp,
+ unsigned int device_addr,
+ unsigned int reg_addr)
+{
+ u32 reg;
+ int retval;
+
+ /* Set EDID device address */
+ reg = device_addr;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+ writel(0x0, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+ writel(0x0, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+ /* Set offset from base address of EDID device */
+ writel(reg_addr, dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
+
+ /*
+ * Set I2C transaction and write address
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
+ AUX_TX_COMM_WRITE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = analogix_dp_start_aux_transaction(dp);
+ if (retval != 0)
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
+
+ return retval;
+}
+
+int analogix_dp_read_byte_from_i2c(struct analogix_dp_device *dp,
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int *data)
+{
+ u32 reg;
+ int i;
+ int retval;
+
+ for (i = 0; i < 3; i++) {
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+ /* Select EDID device */
+ retval = analogix_dp_select_i2c_device(dp, device_addr,
+ reg_addr);
+ if (retval != 0)
+ continue;
+
+ /*
+ * Set I2C transaction and read data
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_TX_COMM_I2C_TRANSACTION |
+ AUX_TX_COMM_READ;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = analogix_dp_start_aux_transaction(dp);
+ if (retval == 0)
+ break;
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
+ }
+
+ /* Read data */
+ if (retval == 0)
+ *data = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
+
+ return retval;
+}
+
+int analogix_dp_read_bytes_from_i2c(struct analogix_dp_device *dp,
+ unsigned int device_addr,
+ unsigned int reg_addr,
+ unsigned int count,
+ unsigned char edid[])
+{
+ u32 reg;
+ unsigned int i, j;
+ unsigned int cur_data_idx;
+ unsigned int defer = 0;
+ int retval = 0;
+
+ for (i = 0; i < count; i += 16) {
+ for (j = 0; j < 3; j++) {
+ /* Clear AUX CH data buffer */
+ reg = BUF_CLR;
+ writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+ /* Set normal AUX CH command */
+ reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+ reg &= ~ADDR_ONLY;
+ writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+
+ /*
+ * If Rx sends defer, Tx sends only reads
+ * request without sending address
+ */
+ if (!defer)
+ retval = analogix_dp_select_i2c_device(
+ dp, device_addr, reg_addr + i);
+ else
+ defer = 0;
+
+ if (retval == 0) {
+ /*
+ * Set I2C transaction and write data
+ * If bit 3 is 1, DisplayPort transaction.
+ * If Bit 3 is 0, I2C transaction.
+ */
+ reg = AUX_LENGTH(16) |
+ AUX_TX_COMM_I2C_TRANSACTION |
+ AUX_TX_COMM_READ;
+ writel(reg, dp->reg_base +
+ ANALOGIX_DP_AUX_CH_CTL_1);
+
+ /* Start AUX transaction */
+ retval = analogix_dp_start_aux_transaction(dp);
+ if (retval == 0)
+ break;
+
+ dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
+ __func__);
+ }
+ /* Check if Rx sends defer */
+ reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM);
+ if (reg == AUX_RX_COMM_AUX_DEFER ||
+ reg == AUX_RX_COMM_I2C_DEFER) {
+ dev_err(dp->dev, "Defer: %d\n\n", reg);
+ defer = 1;
+ }
+ }
+
+ for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0
+ + 4 * cur_data_idx);
+ edid[i + cur_data_idx] = (unsigned char)reg;
+ }
+ }
+
+ return retval;
+}
+
+void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
+{
+ u32 reg;
+
+ reg = bwtype;
+ if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS))
+ writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+}
+
+void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+ *bwtype = reg;
+}
+
+void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count)
+{
+ u32 reg;
+
+ reg = count;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+}
+
+void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+ *count = reg;
+}
+
+void analogix_dp_enable_enhanced_mode(struct analogix_dp_device *dp,
+ bool enable)
+{
+ u32 reg;
+
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+ reg |= ENHANCED;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+ reg &= ~ENHANCED;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+ }
+}
+
+void analogix_dp_set_training_pattern(struct analogix_dp_device *dp,
+ enum pattern_set pattern)
+{
+ u32 reg;
+
+ switch (pattern) {
+ case PRBS7:
+ reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
+ writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+ break;
+ case D10_2:
+ reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
+ writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+ break;
+ case TRAINING_PTN1:
+ reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
+ writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+ break;
+ case TRAINING_PTN2:
+ reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
+ writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+ break;
+ case DP_NONE:
+ reg = SCRAMBLING_ENABLE |
+ LINK_QUAL_PATTERN_SET_DISABLE |
+ SW_TRAINING_PATTERN_SET_NORMAL;
+ writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+ break;
+ default:
+ break;
+ }
+}
+
+void analogix_dp_set_lane0_pre_emphasis(struct analogix_dp_device *dp,
+ u32 level)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+ reg &= ~PRE_EMPHASIS_SET_MASK;
+ reg |= level << PRE_EMPHASIS_SET_SHIFT;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane1_pre_emphasis(struct analogix_dp_device *dp,
+ u32 level)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+ reg &= ~PRE_EMPHASIS_SET_MASK;
+ reg |= level << PRE_EMPHASIS_SET_SHIFT;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane2_pre_emphasis(struct analogix_dp_device *dp,
+ u32 level)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+ reg &= ~PRE_EMPHASIS_SET_MASK;
+ reg |= level << PRE_EMPHASIS_SET_SHIFT;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane3_pre_emphasis(struct analogix_dp_device *dp,
+ u32 level)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+ reg &= ~PRE_EMPHASIS_SET_MASK;
+ reg |= level << PRE_EMPHASIS_SET_SHIFT;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane0_link_training(struct analogix_dp_device *dp,
+ u32 training_lane)
+{
+ u32 reg;
+
+ reg = training_lane;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane1_link_training(struct analogix_dp_device *dp,
+ u32 training_lane)
+{
+ u32 reg;
+
+ reg = training_lane;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane2_link_training(struct analogix_dp_device *dp,
+ u32 training_lane)
+{
+ u32 reg;
+
+ reg = training_lane;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane3_link_training(struct analogix_dp_device *dp,
+ u32 training_lane)
+{
+ u32 reg;
+
+ reg = training_lane;
+ writel(reg, dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane0_link_training(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+ return reg;
+}
+
+u32 analogix_dp_get_lane1_link_training(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+ return reg;
+}
+
+u32 analogix_dp_get_lane2_link_training(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+ return reg;
+}
+
+u32 analogix_dp_get_lane3_link_training(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+ return reg;
+}
+
+void analogix_dp_reset_macro(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_PHY_TEST);
+ reg |= MACRO_RST;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+
+ /* 10 us is the minimum reset time. */
+ usleep_range(10, 20);
+
+ reg &= ~MACRO_RST;
+ writel(reg, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+}
+
+void analogix_dp_init_video(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
+ writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+
+ reg = 0x0;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+ reg = CHA_CRI(4) | CHA_CTRL;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+
+ reg = 0x0;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+
+ reg = VID_HRES_TH(2) | VID_VRES_TH(0);
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_8);
+}
+
+void analogix_dp_set_video_color_format(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ /* Configure the input color depth, color space, dynamic range */
+ reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
+ (dp->video_info->color_depth << IN_BPC_SHIFT) |
+ (dp->video_info->color_space << IN_COLOR_F_SHIFT);
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_2);
+
+ /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+ reg &= ~IN_YC_COEFFI_MASK;
+ if (dp->video_info->ycbcr_coeff)
+ reg |= IN_YC_COEFFI_ITU709;
+ else
+ reg |= IN_YC_COEFFI_ITU601;
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+}
+
+int analogix_dp_is_slave_video_stream_clock_on(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+ if (!(reg & DET_STA)) {
+ dev_dbg(dp->dev, "Input stream clock not detected.\n");
+ return -EINVAL;
+ }
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+ dev_dbg(dp->dev, "wait SYS_CTL_2.\n");
+
+ if (reg & CHA_STA) {
+ dev_dbg(dp->dev, "Input stream clk is changing\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void analogix_dp_set_video_cr_mn(struct analogix_dp_device *dp,
+ enum clock_recovery_m_value_type type,
+ u32 m_value, u32 n_value)
+{
+ u32 reg;
+
+ if (type == REGISTER_M) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+ reg |= FIX_M_VID;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+ reg = m_value & 0xff;
+ writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_0);
+ reg = (m_value >> 8) & 0xff;
+ writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_1);
+ reg = (m_value >> 16) & 0xff;
+ writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_2);
+
+ reg = n_value & 0xff;
+ writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_0);
+ reg = (n_value >> 8) & 0xff;
+ writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_1);
+ reg = (n_value >> 16) & 0xff;
+ writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_2);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+ reg &= ~FIX_M_VID;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+
+ writel(0x00, dp->reg_base + ANALOGIX_DP_N_VID_0);
+ writel(0x80, dp->reg_base + ANALOGIX_DP_N_VID_1);
+ writel(0x00, dp->reg_base + ANALOGIX_DP_N_VID_2);
+ }
+}
+
+void analogix_dp_set_video_timing_mode(struct analogix_dp_device *dp, u32 type)
+{
+ u32 reg;
+
+ if (type == VIDEO_TIMING_FROM_CAPTURE) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+ reg &= ~FORMAT_SEL;
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+ reg |= FORMAT_SEL;
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+ }
+}
+
+void analogix_dp_enable_video_master(struct analogix_dp_device *dp, bool enable)
+{
+ u32 reg;
+
+ if (enable) {
+ reg = readl(dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+ reg &= ~VIDEO_MODE_MASK;
+ reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+ } else {
+ reg = readl(dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+ reg &= ~VIDEO_MODE_MASK;
+ reg |= VIDEO_MODE_SLAVE_MODE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+ }
+}
+
+void analogix_dp_start_video(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+ reg |= VIDEO_EN;
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+}
+
+int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+ if (!(reg & STRM_VALID)) {
+ dev_dbg(dp->dev, "Input video stream is not detected.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+ reg &= ~(MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N);
+ reg |= MASTER_VID_FUNC_EN_N;
+ writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+ reg &= ~INTERACE_SCAN_CFG;
+ reg |= (dp->video_info->interlaced << 2);
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+ reg &= ~VSYNC_POLARITY_CFG;
+ reg |= (dp->video_info->v_sync_polarity << 1);
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+ reg &= ~HSYNC_POLARITY_CFG;
+ reg |= (dp->video_info->h_sync_polarity << 0);
+ writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+ reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+}
+
+void analogix_dp_enable_scrambling(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+ reg &= ~SCRAMBLING_DISABLE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+}
+
+void analogix_dp_disable_scrambling(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+ reg |= SCRAMBLING_DISABLE;
+ writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+}
diff --git a/drivers/gpu/drm/exynos/exynos_dp_reg.h b/drivers/gpu/drm/bridge/analogix_dp_reg.h
similarity index 64%
rename from drivers/gpu/drm/exynos/exynos_dp_reg.h
rename to drivers/gpu/drm/bridge/analogix_dp_reg.h
index 2e9bd0e..bed226f 100644
--- a/drivers/gpu/drm/exynos/exynos_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix_dp_reg.h
@@ -1,5 +1,5 @@
/*
- * Register definition file for Samsung DP driver
+ * Register definition file for Analogix Core DP driver
*
* Copyright (C) 2012 Samsung Electronics Co., Ltd.
* Author: Jingoo Han <jg1.han@samsung.com>
@@ -9,96 +9,96 @@
* published by the Free Software Foundation.
*/
-#ifndef _EXYNOS_DP_REG_H
-#define _EXYNOS_DP_REG_H
-
-#define EXYNOS_DP_TX_SW_RESET 0x14
-#define EXYNOS_DP_FUNC_EN_1 0x18
-#define EXYNOS_DP_FUNC_EN_2 0x1C
-#define EXYNOS_DP_VIDEO_CTL_1 0x20
-#define EXYNOS_DP_VIDEO_CTL_2 0x24
-#define EXYNOS_DP_VIDEO_CTL_3 0x28
-
-#define EXYNOS_DP_VIDEO_CTL_8 0x3C
-#define EXYNOS_DP_VIDEO_CTL_10 0x44
-
-#define EXYNOS_DP_LANE_MAP 0x35C
-
-#define EXYNOS_DP_ANALOG_CTL_1 0x370
-#define EXYNOS_DP_ANALOG_CTL_2 0x374
-#define EXYNOS_DP_ANALOG_CTL_3 0x378
-#define EXYNOS_DP_PLL_FILTER_CTL_1 0x37C
-#define EXYNOS_DP_TX_AMP_TUNING_CTL 0x380
-
-#define EXYNOS_DP_AUX_HW_RETRY_CTL 0x390
-
-#define EXYNOS_DP_COMMON_INT_STA_1 0x3C4
-#define EXYNOS_DP_COMMON_INT_STA_2 0x3C8
-#define EXYNOS_DP_COMMON_INT_STA_3 0x3CC
-#define EXYNOS_DP_COMMON_INT_STA_4 0x3D0
-#define EXYNOS_DP_INT_STA 0x3DC
-#define EXYNOS_DP_COMMON_INT_MASK_1 0x3E0
-#define EXYNOS_DP_COMMON_INT_MASK_2 0x3E4
-#define EXYNOS_DP_COMMON_INT_MASK_3 0x3E8
-#define EXYNOS_DP_COMMON_INT_MASK_4 0x3EC
-#define EXYNOS_DP_INT_STA_MASK 0x3F8
-#define EXYNOS_DP_INT_CTL 0x3FC
-
-#define EXYNOS_DP_SYS_CTL_1 0x600
-#define EXYNOS_DP_SYS_CTL_2 0x604
-#define EXYNOS_DP_SYS_CTL_3 0x608
-#define EXYNOS_DP_SYS_CTL_4 0x60C
-
-#define EXYNOS_DP_PKT_SEND_CTL 0x640
-#define EXYNOS_DP_HDCP_CTL 0x648
-
-#define EXYNOS_DP_LINK_BW_SET 0x680
-#define EXYNOS_DP_LANE_COUNT_SET 0x684
-#define EXYNOS_DP_TRAINING_PTN_SET 0x688
-#define EXYNOS_DP_LN0_LINK_TRAINING_CTL 0x68C
-#define EXYNOS_DP_LN1_LINK_TRAINING_CTL 0x690
-#define EXYNOS_DP_LN2_LINK_TRAINING_CTL 0x694
-#define EXYNOS_DP_LN3_LINK_TRAINING_CTL 0x698
-
-#define EXYNOS_DP_DEBUG_CTL 0x6C0
-#define EXYNOS_DP_HPD_DEGLITCH_L 0x6C4
-#define EXYNOS_DP_HPD_DEGLITCH_H 0x6C8
-#define EXYNOS_DP_LINK_DEBUG_CTL 0x6E0
-
-#define EXYNOS_DP_M_VID_0 0x700
-#define EXYNOS_DP_M_VID_1 0x704
-#define EXYNOS_DP_M_VID_2 0x708
-#define EXYNOS_DP_N_VID_0 0x70C
-#define EXYNOS_DP_N_VID_1 0x710
-#define EXYNOS_DP_N_VID_2 0x714
-
-#define EXYNOS_DP_PLL_CTL 0x71C
-#define EXYNOS_DP_PHY_PD 0x720
-#define EXYNOS_DP_PHY_TEST 0x724
-
-#define EXYNOS_DP_VIDEO_FIFO_THRD 0x730
-#define EXYNOS_DP_AUDIO_MARGIN 0x73C
-
-#define EXYNOS_DP_M_VID_GEN_FILTER_TH 0x764
-#define EXYNOS_DP_M_AUD_GEN_FILTER_TH 0x778
-#define EXYNOS_DP_AUX_CH_STA 0x780
-#define EXYNOS_DP_AUX_CH_DEFER_CTL 0x788
-#define EXYNOS_DP_AUX_RX_COMM 0x78C
-#define EXYNOS_DP_BUFFER_DATA_CTL 0x790
-#define EXYNOS_DP_AUX_CH_CTL_1 0x794
-#define EXYNOS_DP_AUX_ADDR_7_0 0x798
-#define EXYNOS_DP_AUX_ADDR_15_8 0x79C
-#define EXYNOS_DP_AUX_ADDR_19_16 0x7A0
-#define EXYNOS_DP_AUX_CH_CTL_2 0x7A4
-
-#define EXYNOS_DP_BUF_DATA_0 0x7C0
-
-#define EXYNOS_DP_SOC_GENERAL_CTL 0x800
-
-/* EXYNOS_DP_TX_SW_RESET */
+#ifndef _ANALOGIX_DP_REG_H
+#define _ANALOGIX_DP_REG_H
+
+#define ANALOGIX_DP_TX_SW_RESET 0x14
+#define ANALOGIX_DP_FUNC_EN_1 0x18
+#define ANALOGIX_DP_FUNC_EN_2 0x1C
+#define ANALOGIX_DP_VIDEO_CTL_1 0x20
+#define ANALOGIX_DP_VIDEO_CTL_2 0x24
+#define ANALOGIX_DP_VIDEO_CTL_3 0x28
+
+#define ANALOGIX_DP_VIDEO_CTL_8 0x3C
+#define ANALOGIX_DP_VIDEO_CTL_10 0x44
+
+#define ANALOGIX_DP_LANE_MAP 0x35C
+
+#define ANALOGIX_DP_ANALOG_CTL_1 0x370
+#define ANALOGIX_DP_ANALOG_CTL_2 0x374
+#define ANALOGIX_DP_ANALOG_CTL_3 0x378
+#define ANALOGIX_DP_PLL_FILTER_CTL_1 0x37C
+#define ANALOGIX_DP_TX_AMP_TUNING_CTL 0x380
+
+#define ANALOGIX_DP_AUX_HW_RETRY_CTL 0x390
+
+#define ANALOGIX_DP_COMMON_INT_STA_1 0x3C4
+#define ANALOGIX_DP_COMMON_INT_STA_2 0x3C8
+#define ANALOGIX_DP_COMMON_INT_STA_3 0x3CC
+#define ANALOGIX_DP_COMMON_INT_STA_4 0x3D0
+#define ANALOGIX_DP_INT_STA 0x3DC
+#define ANALOGIX_DP_COMMON_INT_MASK_1 0x3E0
+#define ANALOGIX_DP_COMMON_INT_MASK_2 0x3E4
+#define ANALOGIX_DP_COMMON_INT_MASK_3 0x3E8
+#define ANALOGIX_DP_COMMON_INT_MASK_4 0x3EC
+#define ANALOGIX_DP_INT_STA_MASK 0x3F8
+#define ANALOGIX_DP_INT_CTL 0x3FC
+
+#define ANALOGIX_DP_SYS_CTL_1 0x600
+#define ANALOGIX_DP_SYS_CTL_2 0x604
+#define ANALOGIX_DP_SYS_CTL_3 0x608
+#define ANALOGIX_DP_SYS_CTL_4 0x60C
+
+#define ANALOGIX_DP_PKT_SEND_CTL 0x640
+#define ANALOGIX_DP_HDCP_CTL 0x648
+
+#define ANALOGIX_DP_LINK_BW_SET 0x680
+#define ANALOGIX_DP_LANE_COUNT_SET 0x684
+#define ANALOGIX_DP_TRAINING_PTN_SET 0x688
+#define ANALOGIX_DP_LN0_LINK_TRAINING_CTL 0x68C
+#define ANALOGIX_DP_LN1_LINK_TRAINING_CTL 0x690
+#define ANALOGIX_DP_LN2_LINK_TRAINING_CTL 0x694
+#define ANALOGIX_DP_LN3_LINK_TRAINING_CTL 0x698
+
+#define ANALOGIX_DP_DEBUG_CTL 0x6C0
+#define ANALOGIX_DP_HPD_DEGLITCH_L 0x6C4
+#define ANALOGIX_DP_HPD_DEGLITCH_H 0x6C8
+#define ANALOGIX_DP_LINK_DEBUG_CTL 0x6E0
+
+#define ANALOGIX_DP_M_VID_0 0x700
+#define ANALOGIX_DP_M_VID_1 0x704
+#define ANALOGIX_DP_M_VID_2 0x708
+#define ANALOGIX_DP_N_VID_0 0x70C
+#define ANALOGIX_DP_N_VID_1 0x710
+#define ANALOGIX_DP_N_VID_2 0x714
+
+#define ANALOGIX_DP_PLL_CTL 0x71C
+#define ANALOGIX_DP_PHY_PD 0x720
+#define ANALOGIX_DP_PHY_TEST 0x724
+
+#define ANALOGIX_DP_VIDEO_FIFO_THRD 0x730
+#define ANALOGIX_DP_AUDIO_MARGIN 0x73C
+
+#define ANALOGIX_DP_M_VID_GEN_FILTER_TH 0x764
+#define ANALOGIX_DP_M_AUD_GEN_FILTER_TH 0x778
+#define ANALOGIX_DP_AUX_CH_STA 0x780
+#define ANALOGIX_DP_AUX_CH_DEFER_CTL 0x788
+#define ANALOGIX_DP_AUX_RX_COMM 0x78C
+#define ANALOGIX_DP_BUFFER_DATA_CTL 0x790
+#define ANALOGIX_DP_AUX_CH_CTL_1 0x794
+#define ANALOGIX_DP_AUX_ADDR_7_0 0x798
+#define ANALOGIX_DP_AUX_ADDR_15_8 0x79C
+#define ANALOGIX_DP_AUX_ADDR_19_16 0x7A0
+#define ANALOGIX_DP_AUX_CH_CTL_2 0x7A4
+
+#define ANALOGIX_DP_BUF_DATA_0 0x7C0
+
+#define ANALOGIX_DP_SOC_GENERAL_CTL 0x800
+
+/* ANALOGIX_DP_TX_SW_RESET */
#define RESET_DP_TX (0x1 << 0)
-/* EXYNOS_DP_FUNC_EN_1 */
+/* ANALOGIX_DP_FUNC_EN_1 */
#define MASTER_VID_FUNC_EN_N (0x1 << 7)
#define SLAVE_VID_FUNC_EN_N (0x1 << 5)
#define AUD_FIFO_FUNC_EN_N (0x1 << 4)
@@ -107,17 +107,17 @@
#define CRC_FUNC_EN_N (0x1 << 1)
#define SW_FUNC_EN_N (0x1 << 0)
-/* EXYNOS_DP_FUNC_EN_2 */
+/* ANALOGIX_DP_FUNC_EN_2 */
#define SSC_FUNC_EN_N (0x1 << 7)
#define AUX_FUNC_EN_N (0x1 << 2)
#define SERDES_FIFO_FUNC_EN_N (0x1 << 1)
#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0)
-/* EXYNOS_DP_VIDEO_CTL_1 */
+/* ANALOGIX_DP_VIDEO_CTL_1 */
#define VIDEO_EN (0x1 << 7)
#define HDCP_VIDEO_MUTE (0x1 << 6)
-/* EXYNOS_DP_VIDEO_CTL_1 */
+/* ANALOGIX_DP_VIDEO_CTL_1 */
#define IN_D_RANGE_MASK (0x1 << 7)
#define IN_D_RANGE_SHIFT (7)
#define IN_D_RANGE_CEA (0x1 << 7)
@@ -134,7 +134,7 @@
#define IN_COLOR_F_YCBCR422 (0x1 << 0)
#define IN_COLOR_F_RGB (0x0 << 0)
-/* EXYNOS_DP_VIDEO_CTL_3 */
+/* ANALOGIX_DP_VIDEO_CTL_3 */
#define IN_YC_COEFFI_MASK (0x1 << 7)
#define IN_YC_COEFFI_SHIFT (7)
#define IN_YC_COEFFI_ITU709 (0x1 << 7)
@@ -144,17 +144,17 @@
#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
-/* EXYNOS_DP_VIDEO_CTL_8 */
+/* ANALOGIX_DP_VIDEO_CTL_8 */
#define VID_HRES_TH(x) (((x) & 0xf) << 4)
#define VID_VRES_TH(x) (((x) & 0xf) << 0)
-/* EXYNOS_DP_VIDEO_CTL_10 */
+/* ANALOGIX_DP_VIDEO_CTL_10 */
#define FORMAT_SEL (0x1 << 4)
#define INTERACE_SCAN_CFG (0x1 << 2)
#define VSYNC_POLARITY_CFG (0x1 << 1)
#define HSYNC_POLARITY_CFG (0x1 << 0)
-/* EXYNOS_DP_LANE_MAP */
+/* ANALOGIX_DP_LANE_MAP */
#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
#define LANE3_MAP_LOGIC_LANE_2 (0x2 << 6)
@@ -172,30 +172,30 @@
#define LANE0_MAP_LOGIC_LANE_2 (0x2 << 0)
#define LANE0_MAP_LOGIC_LANE_3 (0x3 << 0)
-/* EXYNOS_DP_ANALOG_CTL_1 */
+/* ANALOGIX_DP_ANALOG_CTL_1 */
#define TX_TERMINAL_CTRL_50_OHM (0x1 << 4)
-/* EXYNOS_DP_ANALOG_CTL_2 */
+/* ANALOGIX_DP_ANALOG_CTL_2 */
#define SEL_24M (0x1 << 3)
#define TX_DVDD_BIT_1_0625V (0x4 << 0)
-/* EXYNOS_DP_ANALOG_CTL_3 */
+/* ANALOGIX_DP_ANALOG_CTL_3 */
#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5)
#define VCO_BIT_600_MICRO (0x5 << 0)
-/* EXYNOS_DP_PLL_FILTER_CTL_1 */
+/* ANALOGIX_DP_PLL_FILTER_CTL_1 */
#define PD_RING_OSC (0x1 << 6)
#define AUX_TERMINAL_CTRL_50_OHM (0x2 << 4)
#define TX_CUR1_2X (0x1 << 2)
#define TX_CUR_16_MA (0x3 << 0)
-/* EXYNOS_DP_TX_AMP_TUNING_CTL */
+/* ANALOGIX_DP_TX_AMP_TUNING_CTL */
#define CH3_AMP_400_MV (0x0 << 24)
#define CH2_AMP_400_MV (0x0 << 16)
#define CH1_AMP_400_MV (0x0 << 8)
#define CH0_AMP_400_MV (0x0 << 0)
-/* EXYNOS_DP_AUX_HW_RETRY_CTL */
+/* ANALOGIX_DP_AUX_HW_RETRY_CTL */
#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8)
#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3)
#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3)
@@ -204,7 +204,7 @@
#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3)
#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0)
-/* EXYNOS_DP_COMMON_INT_STA_1 */
+/* ANALOGIX_DP_COMMON_INT_STA_1 */
#define VSYNC_DET (0x1 << 7)
#define PLL_LOCK_CHG (0x1 << 6)
#define SPDIF_ERR (0x1 << 5)
@@ -214,19 +214,19 @@
#define VID_CLK_CHG (0x1 << 1)
#define SW_INT (0x1 << 0)
-/* EXYNOS_DP_COMMON_INT_STA_2 */
+/* ANALOGIX_DP_COMMON_INT_STA_2 */
#define ENC_EN_CHG (0x1 << 6)
#define HW_BKSV_RDY (0x1 << 3)
#define HW_SHA_DONE (0x1 << 2)
#define HW_AUTH_STATE_CHG (0x1 << 1)
#define HW_AUTH_DONE (0x1 << 0)
-/* EXYNOS_DP_COMMON_INT_STA_3 */
+/* ANALOGIX_DP_COMMON_INT_STA_3 */
#define AFIFO_UNDER (0x1 << 7)
#define AFIFO_OVER (0x1 << 6)
#define R0_CHK_FLAG (0x1 << 5)
-/* EXYNOS_DP_COMMON_INT_STA_4 */
+/* ANALOGIX_DP_COMMON_INT_STA_4 */
#define PSR_ACTIVE (0x1 << 7)
#define PSR_INACTIVE (0x1 << 6)
#define SPDIF_BI_PHASE_ERR (0x1 << 5)
@@ -234,29 +234,29 @@
#define HPD_LOST (0x1 << 1)
#define PLUG (0x1 << 0)
-/* EXYNOS_DP_INT_STA */
+/* ANALOGIX_DP_INT_STA */
#define INT_HPD (0x1 << 6)
#define HW_TRAINING_FINISH (0x1 << 5)
#define RPLY_RECEIV (0x1 << 1)
#define AUX_ERR (0x1 << 0)
-/* EXYNOS_DP_INT_CTL */
+/* ANALOGIX_DP_INT_CTL */
#define SOFT_INT_CTRL (0x1 << 2)
#define INT_POL1 (0x1 << 1)
#define INT_POL0 (0x1 << 0)
-/* EXYNOS_DP_SYS_CTL_1 */
+/* ANALOGIX_DP_SYS_CTL_1 */
#define DET_STA (0x1 << 2)
#define FORCE_DET (0x1 << 1)
#define DET_CTRL (0x1 << 0)
-/* EXYNOS_DP_SYS_CTL_2 */
+/* ANALOGIX_DP_SYS_CTL_2 */
#define CHA_CRI(x) (((x) & 0xf) << 4)
#define CHA_STA (0x1 << 2)
#define FORCE_CHA (0x1 << 1)
#define CHA_CTRL (0x1 << 0)
-/* EXYNOS_DP_SYS_CTL_3 */
+/* ANALOGIX_DP_SYS_CTL_3 */
#define HPD_STATUS (0x1 << 6)
#define F_HPD (0x1 << 5)
#define HPD_CTRL (0x1 << 4)
@@ -265,13 +265,13 @@
#define F_VALID (0x1 << 1)
#define VALID_CTRL (0x1 << 0)
-/* EXYNOS_DP_SYS_CTL_4 */
+/* ANALOGIX_DP_SYS_CTL_4 */
#define FIX_M_AUD (0x1 << 4)
#define ENHANCED (0x1 << 3)
#define FIX_M_VID (0x1 << 2)
#define M_VID_UPDATE_CTRL (0x3 << 0)
-/* EXYNOS_DP_TRAINING_PTN_SET */
+/* ANALOGIX_DP_TRAINING_PTN_SET */
#define SCRAMBLER_TYPE (0x1 << 9)
#define HW_LINK_TRAINING_PATTERN (0x1 << 8)
#define SCRAMBLING_DISABLE (0x1 << 5)
@@ -285,24 +285,24 @@
#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0)
#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0)
-/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */
+/* ANALOGIX_DP_LN0_LINK_TRAINING_CTL */
#define PRE_EMPHASIS_SET_MASK (0x3 << 3)
#define PRE_EMPHASIS_SET_SHIFT (3)
-/* EXYNOS_DP_DEBUG_CTL */
+/* ANALOGIX_DP_DEBUG_CTL */
#define PLL_LOCK (0x1 << 4)
#define F_PLL_LOCK (0x1 << 3)
#define PLL_LOCK_CTRL (0x1 << 2)
#define PN_INV (0x1 << 0)
-/* EXYNOS_DP_PLL_CTL */
+/* ANALOGIX_DP_PLL_CTL */
#define DP_PLL_PD (0x1 << 7)
#define DP_PLL_RESET (0x1 << 6)
#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4)
#define DP_PLL_REF_BIT_1_1250V (0x5 << 0)
#define DP_PLL_REF_BIT_1_2500V (0x7 << 0)
-/* EXYNOS_DP_PHY_PD */
+/* ANALOGIX_DP_PHY_PD */
#define DP_PHY_PD (0x1 << 5)
#define AUX_PD (0x1 << 4)
#define CH3_PD (0x1 << 3)
@@ -310,28 +310,28 @@
#define CH1_PD (0x1 << 1)
#define CH0_PD (0x1 << 0)
-/* EXYNOS_DP_PHY_TEST */
+/* ANALOGIX_DP_PHY_TEST */
#define MACRO_RST (0x1 << 5)
#define CH1_TEST (0x1 << 1)
#define CH0_TEST (0x1 << 0)
-/* EXYNOS_DP_AUX_CH_STA */
+/* ANALOGIX_DP_AUX_CH_STA */
#define AUX_BUSY (0x1 << 4)
#define AUX_STATUS_MASK (0xf << 0)
-/* EXYNOS_DP_AUX_CH_DEFER_CTL */
+/* ANALOGIX_DP_AUX_CH_DEFER_CTL */
#define DEFER_CTRL_EN (0x1 << 7)
#define DEFER_COUNT(x) (((x) & 0x7f) << 0)
-/* EXYNOS_DP_AUX_RX_COMM */
+/* ANALOGIX_DP_AUX_RX_COMM */
#define AUX_RX_COMM_I2C_DEFER (0x2 << 2)
#define AUX_RX_COMM_AUX_DEFER (0x2 << 0)
-/* EXYNOS_DP_BUFFER_DATA_CTL */
+/* ANALOGIX_DP_BUFFER_DATA_CTL */
#define BUF_CLR (0x1 << 7)
#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0)
-/* EXYNOS_DP_AUX_CH_CTL_1 */
+/* ANALOGIX_DP_AUX_CH_CTL_1 */
#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4)
#define AUX_TX_COMM_MASK (0xf << 0)
#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3)
@@ -340,20 +340,20 @@
#define AUX_TX_COMM_WRITE (0x0 << 0)
#define AUX_TX_COMM_READ (0x1 << 0)
-/* EXYNOS_DP_AUX_ADDR_7_0 */
+/* ANALOGIX_DP_AUX_ADDR_7_0 */
#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff)
-/* EXYNOS_DP_AUX_ADDR_15_8 */
+/* ANALOGIX_DP_AUX_ADDR_15_8 */
#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff)
-/* EXYNOS_DP_AUX_ADDR_19_16 */
+/* ANALOGIX_DP_AUX_ADDR_19_16 */
#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f)
-/* EXYNOS_DP_AUX_CH_CTL_2 */
+/* ANALOGIX_DP_AUX_CH_CTL_2 */
#define ADDR_ONLY (0x1 << 1)
#define AUX_EN (0x1 << 0)
-/* EXYNOS_DP_SOC_GENERAL_CTL */
+/* ANALOGIX_DP_SOC_GENERAL_CTL */
#define AUDIO_MODE_SPDIF_MODE (0x1 << 8)
#define AUDIO_MODE_MASTER_MODE (0x0 << 8)
#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4)
@@ -363,4 +363,4 @@
#define VIDEO_MODE_SLAVE_MODE (0x1 << 0)
#define VIDEO_MODE_MASTER_MODE (0x0 << 0)
-#endif /* _EXYNOS_DP_REG_H */
+#endif /* _ANALOGIX_DP_REG_H */
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 43003c4..b33549c 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -54,9 +54,10 @@ config DRM_EXYNOS_DSI
help
This enables support for Exynos MIPI-DSI device.
-config DRM_EXYNOS_DP
- bool "EXYNOS DRM DP driver support"
+config DRM_EXYNOS_ANALOGIX_DP
+ bool "EXYNOS specific extensions for Analogix DP driver"
depends on DRM_EXYNOS && (DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON) && (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
+ select DRM_ANALOGIX_DP
default DRM_EXYNOS
select DRM_PANEL
help
diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile
index 7de0b10..cda4d26 100644
--- a/drivers/gpu/drm/exynos/Makefile
+++ b/drivers/gpu/drm/exynos/Makefile
@@ -14,7 +14,7 @@ exynosdrm-$(CONFIG_DRM_EXYNOS5433_DECON) += exynos5433_drm_decon.o
exynosdrm-$(CONFIG_DRM_EXYNOS7_DECON) += exynos7_drm_decon.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DPI) += exynos_drm_dpi.o
exynosdrm-$(CONFIG_DRM_EXYNOS_DSI) += exynos_drm_dsi.o
-exynosdrm-$(CONFIG_DRM_EXYNOS_DP) += exynos_dp_core.o exynos_dp_reg.o
+exynosdrm-$(CONFIG_DRM_EXYNOS_ANALOGIX_DP) += analogix_dp-exynos.o
exynosdrm-$(CONFIG_DRM_EXYNOS_HDMI) += exynos_hdmi.o exynos_mixer.o
exynosdrm-$(CONFIG_DRM_EXYNOS_VIDI) += exynos_drm_vidi.o
exynosdrm-$(CONFIG_DRM_EXYNOS_G2D) += exynos_drm_g2d.o
diff --git a/drivers/gpu/drm/exynos/analogix_dp-exynos.c b/drivers/gpu/drm/exynos/analogix_dp-exynos.c
new file mode 100644
index 0000000..1468ce7
--- /dev/null
+++ b/drivers/gpu/drm/exynos/analogix_dp-exynos.c
@@ -0,0 +1,237 @@
+/*
+ * Samsung SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/component.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_panel.h>
+#include <drm/bridge/ptn3460.h>
+
+#include <drm/exynos_drm.h>
+#include "exynos_drm_drv.h"
+
+#define plat_data_to_dp(pd) \
+ container_of(pd, struct exynos_dp_device, plat_data)
+
+struct exynos_dp_device {
+ struct exynos_drm_display display;
+ struct drm_bridge *ptn_bridge;
+ struct drm_device *drm_dev;
+ struct device *dev;
+
+ struct analogix_dp_plat_data plat_data;
+};
+
+int exynos_dp_crtc_clock_enable(struct analogix_dp_plat_data *plat_data,
+ bool enable)
+{
+ struct exynos_dp_device *dp = plat_data_to_dp(plat_data);
+ struct drm_encoder *encoder = dp->display.encoder;
+ struct exynos_drm_crtc *crtc;
+
+ if (!encoder)
+ return -1;
+
+ crtc = to_exynos_crtc(encoder->crtc);
+ if (crtc && crtc->ops && crtc->ops->clock_enable)
+ crtc->ops->clock_enable(crtc, enable);
+
+ return 0;
+}
+
+static int exynos_dp_poweron(struct analogix_dp_plat_data *plat_data)
+{
+ exynos_dp_crtc_clock_enable(plat_data, true);
+}
+
+static int exynos_dp_poweroff(struct analogix_dp_plat_data *plat_data)
+{
+ exynos_dp_crtc_clock_enable(plat_data, false);
+}
+
+static int exynos_dp_bridge_attach(struct analogix_dp_plat_data *plat_data,
+ struct drm_bridge *bridge)
+{
+ struct exynos_dp_device *dp = plat_data_to_dp(plat_data);
+ struct drm_encoder *encoder = dp->display.encoder;
+ int ret;
+
+ /* Pre-empt DP connector creation if there's a bridge */
+ if (dp->ptn_bridge) {
+ dp->bridge->next = dp->ptn_bridge;
+ dp->bridge->encoder = encoder;
+ ret = drm_bridge_attach(encoder->dev, dp->bridge);
+ if (ret) {
+ DRM_ERROR("Failed to attach bridge to drm\n");
+ bridge->next = NULL;
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void exynos_dp_dpms(struct exynos_drm_display *display, int mode)
+{
+ /* do nothing */
+}
+
+static int exynos_dp_create_connector(struct exynos_drm_display *display,
+ struct drm_encoder *encoder)
+{
+ /* do nothing */
+ return 0;
+}
+
+static void exynos_dp_commit(struct exynos_drm_display *display)
+{
+ /* do nothing */
+}
+
+static struct exynos_drm_display_ops exynos_dp_display_ops = {
+ .create_connector = exynos_dp_create_connector,
+ .dpms = exynos_dp_dpms,
+ .commit = exynos_dp_commit,
+};
+
+static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
+{
+ struct exynos_dp_device *dp = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ int ret;
+
+ /*
+ * Just like the probe function said, we don't need the
+ * device drvrate anymore, we should leave the charge to
+ * analogix dp driver, set the device drvdata to NULL.
+ */
+ dev_set_drvdata(dev, NULL);
+
+ dp->dev = dev;
+ dp->drm_dev = drm_dev;
+
+ dp->plat_data.power_on = exynos_dp_poweron;
+ dp->plat_data.power_off = exynos_dp_poweroff;
+ dp->plat_data.attach = exynos_dp_bridge_attach;
+
+ ret = exynos_drm_create_enc_conn(dp->drm_dev, &dp->display);
+ if (ret) {
+ DRM_ERROR("exynos dp create enc_conn failed\n");
+ return ret;
+ }
+
+ return analogix_dp_bind(dev, dp->drm_dev, dp->display.encoder,
+ &dp->plat_data);
+}
+
+static void exynos_dp_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ return analogix_dp_unbind(dev, master, data);
+}
+
+static const struct component_ops exynos_dp_ops = {
+ .bind = exynos_dp_bind,
+ .unbind = exynos_dp_unbind,
+};
+
+static int exynos_dp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *panel_node, *bridge_node, *endpoint;
+ struct exynos_dp_device *dp;
+
+ dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
+ GFP_KERNEL);
+ if (!dp)
+ return -ENOMEM;
+
+ /*
+ * We just use the drvdata until driver run into component
+ * add function, and then we would set drvdata to null, so
+ * that analogix dp driver would take charge of the drvdata.
+ */
+ platform_set_drvdata(pdev, dp);
+
+ dp->display.type = EXYNOS_DISPLAY_TYPE_LCD;
+ dp->display.ops = &exynos_dp_display_ops;
+
+ panel_node = of_parse_phandle(dev->of_node, "panel", 0);
+ if (panel_node) {
+ dp->panel = of_drm_find_panel(panel_node);
+ of_node_put(panel_node);
+ if (!dp->panel)
+ return -EPROBE_DEFER;
+ }
+
+ endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
+ if (endpoint) {
+ bridge_node = of_graph_get_remote_port_parent(endpoint);
+ if (bridge_node) {
+ dp->ptn_bridge = of_drm_find_bridge(bridge_node);
+ of_node_put(bridge_node);
+ if (!dp->ptn_bridge)
+ return -EPROBE_DEFER;
+ } else {
+ return -EPROBE_DEFER;
+ }
+ }
+
+ return component_add(&pdev->dev, &exynos_dp_ops);
+}
+
+static int exynos_dp_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &exynos_dp_ops);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_dp_suspend(struct device *dev)
+{
+ return analogix_dp_suspend(dev);
+}
+
+static int exynos_dp_resume(struct device *dev)
+{
+ return analogix_dp_resume(dev);
+}
+#endif
+
+static const struct dev_pm_ops exynos_dp_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(exynos_dp_suspend, exynos_dp_resume)
+};
+
+static const struct of_device_id exynos_dp_match[] = {
+ { .compatible = "samsung,exynos5-dp" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos_dp_match);
+
+struct platform_driver dp_driver = {
+ .probe = exynos_dp_probe,
+ .remove = exynos_dp_remove,
+ .driver = {
+ .name = "exynos-dp",
+ .owner = THIS_MODULE,
+ .pm = &exynos_dp_pm_ops,
+ .of_match_table = exynos_dp_match,
+ },
+};
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Samsung Specific Analogix-DP Driver Extension");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.h b/drivers/gpu/drm/exynos/exynos_dp_core.h
deleted file mode 100644
index 29bd56e..0000000
--- a/drivers/gpu/drm/exynos/exynos_dp_core.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * Header file for Samsung DP (Display Port) interface driver.
- *
- * Copyright (C) 2012 Samsung Electronics Co., Ltd.
- * Author: Jingoo Han <jg1.han@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef _EXYNOS_DP_CORE_H
-#define _EXYNOS_DP_CORE_H
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_dp_helper.h>
-#include <drm/exynos_drm.h>
-
-#include "exynos_drm_drv.h"
-
-#define DP_TIMEOUT_LOOP_COUNT 100
-#define MAX_CR_LOOP 5
-#define MAX_EQ_LOOP 5
-
-enum link_rate_type {
- LINK_RATE_1_62GBPS = 0x06,
- LINK_RATE_2_70GBPS = 0x0a
-};
-
-enum link_lane_count_type {
- LANE_COUNT1 = 1,
- LANE_COUNT2 = 2,
- LANE_COUNT4 = 4
-};
-
-enum link_training_state {
- START,
- CLOCK_RECOVERY,
- EQUALIZER_TRAINING,
- FINISHED,
- FAILED
-};
-
-enum voltage_swing_level {
- VOLTAGE_LEVEL_0,
- VOLTAGE_LEVEL_1,
- VOLTAGE_LEVEL_2,
- VOLTAGE_LEVEL_3,
-};
-
-enum pre_emphasis_level {
- PRE_EMPHASIS_LEVEL_0,
- PRE_EMPHASIS_LEVEL_1,
- PRE_EMPHASIS_LEVEL_2,
- PRE_EMPHASIS_LEVEL_3,
-};
-
-enum pattern_set {
- PRBS7,
- D10_2,
- TRAINING_PTN1,
- TRAINING_PTN2,
- DP_NONE
-};
-
-enum color_space {
- COLOR_RGB,
- COLOR_YCBCR422,
- COLOR_YCBCR444
-};
-
-enum color_depth {
- COLOR_6,
- COLOR_8,
- COLOR_10,
- COLOR_12
-};
-
-enum color_coefficient {
- COLOR_YCBCR601,
- COLOR_YCBCR709
-};
-
-enum dynamic_range {
- VESA,
- CEA
-};
-
-enum pll_status {
- PLL_UNLOCKED,
- PLL_LOCKED
-};
-
-enum clock_recovery_m_value_type {
- CALCULATED_M,
- REGISTER_M
-};
-
-enum video_timing_recognition_type {
- VIDEO_TIMING_FROM_CAPTURE,
- VIDEO_TIMING_FROM_REGISTER
-};
-
-enum analog_power_block {
- AUX_BLOCK,
- CH0_BLOCK,
- CH1_BLOCK,
- CH2_BLOCK,
- CH3_BLOCK,
- ANALOG_TOTAL,
- POWER_ALL
-};
-
-enum dp_irq_type {
- DP_IRQ_TYPE_HP_CABLE_IN,
- DP_IRQ_TYPE_HP_CABLE_OUT,
- DP_IRQ_TYPE_HP_CHANGE,
- DP_IRQ_TYPE_UNKNOWN,
-};
-
-struct video_info {
- char *name;
-
- bool h_sync_polarity;
- bool v_sync_polarity;
- bool interlaced;
-
- enum color_space color_space;
- enum dynamic_range dynamic_range;
- enum color_coefficient ycbcr_coeff;
- enum color_depth color_depth;
-
- enum link_rate_type link_rate;
- enum link_lane_count_type lane_count;
-};
-
-struct link_train {
- int eq_loop;
- int cr_loop[4];
-
- u8 link_rate;
- u8 lane_count;
- u8 training_lane[4];
-
- enum link_training_state lt_state;
-};
-
-struct exynos_dp_device {
- struct exynos_drm_display display;
- struct device *dev;
- struct drm_device *drm_dev;
- struct drm_connector connector;
- struct drm_encoder *encoder;
- struct drm_panel *panel;
- struct drm_bridge *bridge;
- struct drm_bridge *ptn_bridge;
- struct clk *clock;
- unsigned int irq;
- void __iomem *reg_base;
-
- struct video_info *video_info;
- struct link_train link_train;
- struct work_struct hotplug_work;
- struct phy *phy;
- int dpms_mode;
- int hpd_gpio;
-
- struct exynos_drm_panel_info priv;
-};
-
-/* exynos_dp_reg.c */
-void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_stop_video(struct exynos_dp_device *dp);
-void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_init_analog_param(struct exynos_dp_device *dp);
-void exynos_dp_init_interrupt(struct exynos_dp_device *dp);
-void exynos_dp_reset(struct exynos_dp_device *dp);
-void exynos_dp_swreset(struct exynos_dp_device *dp);
-void exynos_dp_config_interrupt(struct exynos_dp_device *dp);
-enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp);
-void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
- enum analog_power_block block,
- bool enable);
-void exynos_dp_init_analog_func(struct exynos_dp_device *dp);
-void exynos_dp_init_hpd(struct exynos_dp_device *dp);
-enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp);
-void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp);
-void exynos_dp_reset_aux(struct exynos_dp_device *dp);
-void exynos_dp_init_aux(struct exynos_dp_device *dp);
-int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp);
-void exynos_dp_enable_sw_function(struct exynos_dp_device *dp);
-int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp);
-int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned char data);
-int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned char *data);
-int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[]);
-int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[]);
-int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr);
-int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int *data);
-int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char edid[]);
-void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype);
-void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype);
-void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count);
-void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count);
-void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
- enum pattern_set pattern);
-void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level);
-void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level);
-void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level);
-void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level);
-void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
- u32 training_lane);
-void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
- u32 training_lane);
-void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
- u32 training_lane);
-void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
- u32 training_lane);
-u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp);
-u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp);
-u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp);
-u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp);
-void exynos_dp_reset_macro(struct exynos_dp_device *dp);
-void exynos_dp_init_video(struct exynos_dp_device *dp);
-
-void exynos_dp_set_video_color_format(struct exynos_dp_device *dp);
-int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp);
-void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
- enum clock_recovery_m_value_type type,
- u32 m_value, u32 n_value);
-void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type);
-void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable);
-void exynos_dp_start_video(struct exynos_dp_device *dp);
-int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp);
-void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp);
-void exynos_dp_enable_scrambling(struct exynos_dp_device *dp);
-void exynos_dp_disable_scrambling(struct exynos_dp_device *dp);
-
-/* I2C EDID Chip ID, Slave Address */
-#define I2C_EDID_DEVICE_ADDR 0x50
-#define I2C_E_EDID_DEVICE_ADDR 0x30
-
-#define EDID_BLOCK_LENGTH 0x80
-#define EDID_HEADER_PATTERN 0x00
-#define EDID_EXTENSION_FLAG 0x7e
-#define EDID_CHECKSUM 0x7f
-
-/* DP_MAX_LANE_COUNT */
-#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1)
-#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f)
-
-/* DP_LANE_COUNT_SET */
-#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f)
-
-/* DP_TRAINING_LANE0_SET */
-#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3)
-#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3)
-#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0)
-#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3)
-
-#endif /* _EXYNOS_DP_CORE_H */
diff --git a/drivers/gpu/drm/exynos/exynos_dp_reg.c b/drivers/gpu/drm/exynos/exynos_dp_reg.c
deleted file mode 100644
index 9aa483d..0000000
--- a/drivers/gpu/drm/exynos/exynos_dp_reg.c
+++ /dev/null
@@ -1,1259 +0,0 @@
-/*
- * Samsung DP (Display port) register interface driver.
- *
- * Copyright (C) 2012 Samsung Electronics Co., Ltd.
- * Author: Jingoo Han <jg1.han@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include "exynos_dp_core.h"
-#include "exynos_dp_reg.h"
-
-#define COMMON_INT_MASK_1 0
-#define COMMON_INT_MASK_2 0
-#define COMMON_INT_MASK_3 0
-#define COMMON_INT_MASK_4 (HOTPLUG_CHG | HPD_LOST | PLUG)
-#define INT_STA_MASK INT_HPD
-
-void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable)
-{
- u32 reg;
-
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
- reg |= HDCP_VIDEO_MUTE;
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
- reg &= ~HDCP_VIDEO_MUTE;
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
- }
-}
-
-void exynos_dp_stop_video(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
- reg &= ~VIDEO_EN;
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-}
-
-void exynos_dp_lane_swap(struct exynos_dp_device *dp, bool enable)
-{
- u32 reg;
-
- if (enable)
- reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
- LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
- else
- reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
- LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
-
- writel(reg, dp->reg_base + EXYNOS_DP_LANE_MAP);
-}
-
-void exynos_dp_init_analog_param(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = TX_TERMINAL_CTRL_50_OHM;
- writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_1);
-
- reg = SEL_24M | TX_DVDD_BIT_1_0625V;
- writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_2);
-
- reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
- writel(reg, dp->reg_base + EXYNOS_DP_ANALOG_CTL_3);
-
- reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM |
- TX_CUR1_2X | TX_CUR_16_MA;
- writel(reg, dp->reg_base + EXYNOS_DP_PLL_FILTER_CTL_1);
-
- reg = CH3_AMP_400_MV | CH2_AMP_400_MV |
- CH1_AMP_400_MV | CH0_AMP_400_MV;
- writel(reg, dp->reg_base + EXYNOS_DP_TX_AMP_TUNING_CTL);
-}
-
-void exynos_dp_init_interrupt(struct exynos_dp_device *dp)
-{
- /* Set interrupt pin assertion polarity as high */
- writel(INT_POL1 | INT_POL0, dp->reg_base + EXYNOS_DP_INT_CTL);
-
- /* Clear pending regisers */
- writel(0xff, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
- writel(0x4f, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_2);
- writel(0xe0, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_3);
- writel(0xe7, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
- writel(0x63, dp->reg_base + EXYNOS_DP_INT_STA);
-
- /* 0:mask,1: unmask */
- writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
- writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
- writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
- writel(0x00, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
- writel(0x00, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
-}
-
-void exynos_dp_reset(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- exynos_dp_stop_video(dp);
- exynos_dp_enable_video_mute(dp, 0);
-
- reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
- AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
- HDCP_FUNC_EN_N | SW_FUNC_EN_N;
- writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
-
- reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
- SERDES_FIFO_FUNC_EN_N |
- LS_CLK_DOMAIN_FUNC_EN_N;
- writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-
- usleep_range(20, 30);
-
- exynos_dp_lane_swap(dp, 0);
-
- writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
- writel(0x40, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
- writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
- writel(0x0, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-
- writel(0x0, dp->reg_base + EXYNOS_DP_PKT_SEND_CTL);
- writel(0x0, dp->reg_base + EXYNOS_DP_HDCP_CTL);
-
- writel(0x5e, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_L);
- writel(0x1a, dp->reg_base + EXYNOS_DP_HPD_DEGLITCH_H);
-
- writel(0x10, dp->reg_base + EXYNOS_DP_LINK_DEBUG_CTL);
-
- writel(0x0, dp->reg_base + EXYNOS_DP_PHY_TEST);
-
- writel(0x0, dp->reg_base + EXYNOS_DP_VIDEO_FIFO_THRD);
- writel(0x20, dp->reg_base + EXYNOS_DP_AUDIO_MARGIN);
-
- writel(0x4, dp->reg_base + EXYNOS_DP_M_VID_GEN_FILTER_TH);
- writel(0x2, dp->reg_base + EXYNOS_DP_M_AUD_GEN_FILTER_TH);
-
- writel(0x00000101, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
-}
-
-void exynos_dp_swreset(struct exynos_dp_device *dp)
-{
- writel(RESET_DP_TX, dp->reg_base + EXYNOS_DP_TX_SW_RESET);
-}
-
-void exynos_dp_config_interrupt(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- /* 0: mask, 1: unmask */
- reg = COMMON_INT_MASK_1;
- writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_1);
-
- reg = COMMON_INT_MASK_2;
- writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_2);
-
- reg = COMMON_INT_MASK_3;
- writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_3);
-
- reg = COMMON_INT_MASK_4;
- writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_MASK_4);
-
- reg = INT_STA_MASK;
- writel(reg, dp->reg_base + EXYNOS_DP_INT_STA_MASK);
-}
-
-enum pll_status exynos_dp_get_pll_lock_status(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
- if (reg & PLL_LOCK)
- return PLL_LOCKED;
- else
- return PLL_UNLOCKED;
-}
-
-void exynos_dp_set_pll_power_down(struct exynos_dp_device *dp, bool enable)
-{
- u32 reg;
-
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
- reg |= DP_PLL_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_PLL_CTL);
- reg &= ~DP_PLL_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PLL_CTL);
- }
-}
-
-void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
- enum analog_power_block block,
- bool enable)
-{
- u32 reg;
-
- switch (block) {
- case AUX_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg |= AUX_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg &= ~AUX_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- }
- break;
- case CH0_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg |= CH0_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg &= ~CH0_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- }
- break;
- case CH1_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg |= CH1_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg &= ~CH1_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- }
- break;
- case CH2_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg |= CH2_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg &= ~CH2_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- }
- break;
- case CH3_BLOCK:
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg |= CH3_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg &= ~CH3_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- }
- break;
- case ANALOG_TOTAL:
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg |= DP_PHY_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_PD);
- reg &= ~DP_PHY_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- }
- break;
- case POWER_ALL:
- if (enable) {
- reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
- CH1_PD | CH0_PD;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_PD);
- } else {
- writel(0x00, dp->reg_base + EXYNOS_DP_PHY_PD);
- }
- break;
- default:
- break;
- }
-}
-
-void exynos_dp_init_analog_func(struct exynos_dp_device *dp)
-{
- u32 reg;
- int timeout_loop = 0;
-
- exynos_dp_set_analog_power_down(dp, POWER_ALL, 0);
-
- reg = PLL_LOCK_CHG;
- writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
-
- reg = readl(dp->reg_base + EXYNOS_DP_DEBUG_CTL);
- reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
- writel(reg, dp->reg_base + EXYNOS_DP_DEBUG_CTL);
-
- /* Power up PLL */
- if (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
- exynos_dp_set_pll_power_down(dp, 0);
-
- while (exynos_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
- timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
- dev_err(dp->dev, "failed to get pll lock status\n");
- return;
- }
- usleep_range(10, 20);
- }
- }
-
- /* Enable Serdes FIFO function and Link symbol clock domain module */
- reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
- reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
- | AUX_FUNC_EN_N);
- writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-}
-
-void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- if (gpio_is_valid(dp->hpd_gpio))
- return;
-
- reg = HOTPLUG_CHG | HPD_LOST | PLUG;
- writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
-
- reg = INT_HPD;
- writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
-}
-
-void exynos_dp_init_hpd(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- if (gpio_is_valid(dp->hpd_gpio))
- return;
-
- exynos_dp_clear_hotplug_interrupts(dp);
-
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
- reg &= ~(F_HPD | HPD_CTRL);
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-}
-
-enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- if (gpio_is_valid(dp->hpd_gpio)) {
- reg = gpio_get_value(dp->hpd_gpio);
- if (reg)
- return DP_IRQ_TYPE_HP_CABLE_IN;
- else
- return DP_IRQ_TYPE_HP_CABLE_OUT;
- } else {
- /* Parse hotplug interrupt status register */
- reg = readl(dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
-
- if (reg & PLUG)
- return DP_IRQ_TYPE_HP_CABLE_IN;
-
- if (reg & HPD_LOST)
- return DP_IRQ_TYPE_HP_CABLE_OUT;
-
- if (reg & HOTPLUG_CHG)
- return DP_IRQ_TYPE_HP_CHANGE;
-
- return DP_IRQ_TYPE_UNKNOWN;
- }
-}
-
-void exynos_dp_reset_aux(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- /* Disable AUX channel module */
- reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
- reg |= AUX_FUNC_EN_N;
- writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-}
-
-void exynos_dp_init_aux(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- /* Clear inerrupts related to AUX channel */
- reg = RPLY_RECEIV | AUX_ERR;
- writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
-
- exynos_dp_reset_aux(dp);
-
- /* Disable AUX transaction H/W retry */
- reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0) |
- AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_HW_RETRY_CTL);
-
- /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
- reg = DEFER_CTRL_EN | DEFER_COUNT(1);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_DEFER_CTL);
-
- /* Enable AUX channel module */
- reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_2);
- reg &= ~AUX_FUNC_EN_N;
- writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
-}
-
-int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- if (gpio_is_valid(dp->hpd_gpio)) {
- if (gpio_get_value(dp->hpd_gpio))
- return 0;
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
- if (reg & HPD_STATUS)
- return 0;
- }
-
- return -EINVAL;
-}
-
-void exynos_dp_enable_sw_function(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
- reg &= ~SW_FUNC_EN_N;
- writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
-}
-
-int exynos_dp_start_aux_transaction(struct exynos_dp_device *dp)
-{
- int reg;
- int retval = 0;
- int timeout_loop = 0;
-
- /* Enable AUX CH operation */
- reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
- reg |= AUX_EN;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
-
- /* Is AUX CH command reply received? */
- reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
- while (!(reg & RPLY_RECEIV)) {
- timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
- dev_err(dp->dev, "AUX CH command reply failed!\n");
- return -ETIMEDOUT;
- }
- reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
- usleep_range(10, 11);
- }
-
- /* Clear interrupt source for AUX CH command reply */
- writel(RPLY_RECEIV, dp->reg_base + EXYNOS_DP_INT_STA);
-
- /* Clear interrupt source for AUX CH access error */
- reg = readl(dp->reg_base + EXYNOS_DP_INT_STA);
- if (reg & AUX_ERR) {
- writel(AUX_ERR, dp->reg_base + EXYNOS_DP_INT_STA);
- return -EREMOTEIO;
- }
-
- /* Check AUX CH error access status */
- reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_STA);
- if ((reg & AUX_STATUS_MASK) != 0) {
- dev_err(dp->dev, "AUX CH error happens: %d\n\n",
- reg & AUX_STATUS_MASK);
- return -EREMOTEIO;
- }
-
- return retval;
-}
-
-int exynos_dp_write_byte_to_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned char data)
-{
- u32 reg;
- int i;
- int retval;
-
- for (i = 0; i < 3; i++) {
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
- /* Select DPCD device address */
- reg = AUX_ADDR_7_0(reg_addr);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
- reg = AUX_ADDR_15_8(reg_addr);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
- reg = AUX_ADDR_19_16(reg_addr);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
- /* Write data buffer */
- reg = (unsigned int)data;
- writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
-
- /*
- * Set DisplayPort transaction and write 1 byte
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = exynos_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
- }
-
- return retval;
-}
-
-int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned char *data)
-{
- u32 reg;
- int i;
- int retval;
-
- for (i = 0; i < 3; i++) {
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
- /* Select DPCD device address */
- reg = AUX_ADDR_7_0(reg_addr);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
- reg = AUX_ADDR_15_8(reg_addr);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
- reg = AUX_ADDR_19_16(reg_addr);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
- /*
- * Set DisplayPort transaction and read 1 byte
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = exynos_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
- }
-
- /* Read data buffer */
- reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
- *data = (unsigned char)(reg & 0xff);
-
- return retval;
-}
-
-int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[])
-{
- u32 reg;
- unsigned int start_offset;
- unsigned int cur_data_count;
- unsigned int cur_data_idx;
- int i;
- int retval = 0;
-
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
- start_offset = 0;
- while (start_offset < count) {
- /* Buffer size of AUX CH is 16 * 4bytes */
- if ((count - start_offset) > 16)
- cur_data_count = 16;
- else
- cur_data_count = count - start_offset;
-
- for (i = 0; i < 3; i++) {
- /* Select DPCD device address */
- reg = AUX_ADDR_7_0(reg_addr + start_offset);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
- reg = AUX_ADDR_15_8(reg_addr + start_offset);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
- reg = AUX_ADDR_19_16(reg_addr + start_offset);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
- for (cur_data_idx = 0; cur_data_idx < cur_data_count;
- cur_data_idx++) {
- reg = data[start_offset + cur_data_idx];
- writel(reg, dp->reg_base + EXYNOS_DP_BUF_DATA_0
- + 4 * cur_data_idx);
- }
-
- /*
- * Set DisplayPort transaction and write
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_LENGTH(cur_data_count) |
- AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = exynos_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
- }
-
- start_offset += cur_data_count;
- }
-
- return retval;
-}
-
-int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char data[])
-{
- u32 reg;
- unsigned int start_offset;
- unsigned int cur_data_count;
- unsigned int cur_data_idx;
- int i;
- int retval = 0;
-
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
- start_offset = 0;
- while (start_offset < count) {
- /* Buffer size of AUX CH is 16 * 4bytes */
- if ((count - start_offset) > 16)
- cur_data_count = 16;
- else
- cur_data_count = count - start_offset;
-
- /* AUX CH Request Transaction process */
- for (i = 0; i < 3; i++) {
- /* Select DPCD device address */
- reg = AUX_ADDR_7_0(reg_addr + start_offset);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
- reg = AUX_ADDR_15_8(reg_addr + start_offset);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
- reg = AUX_ADDR_19_16(reg_addr + start_offset);
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
- /*
- * Set DisplayPort transaction and read
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_LENGTH(cur_data_count) |
- AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = exynos_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
- }
-
- for (cur_data_idx = 0; cur_data_idx < cur_data_count;
- cur_data_idx++) {
- reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
- + 4 * cur_data_idx);
- data[start_offset + cur_data_idx] =
- (unsigned char)reg;
- }
-
- start_offset += cur_data_count;
- }
-
- return retval;
-}
-
-int exynos_dp_select_i2c_device(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr)
-{
- u32 reg;
- int retval;
-
- /* Set EDID device address */
- reg = device_addr;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
- writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_15_8);
- writel(0x0, dp->reg_base + EXYNOS_DP_AUX_ADDR_19_16);
-
- /* Set offset from base address of EDID device */
- writel(reg_addr, dp->reg_base + EXYNOS_DP_BUF_DATA_0);
-
- /*
- * Set I2C transaction and write address
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT |
- AUX_TX_COMM_WRITE;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = exynos_dp_start_aux_transaction(dp);
- if (retval != 0)
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
-
- return retval;
-}
-
-int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int *data)
-{
- u32 reg;
- int i;
- int retval;
-
- for (i = 0; i < 3; i++) {
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
- /* Select EDID device */
- retval = exynos_dp_select_i2c_device(dp, device_addr, reg_addr);
- if (retval != 0)
- continue;
-
- /*
- * Set I2C transaction and read data
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_TX_COMM_I2C_TRANSACTION |
- AUX_TX_COMM_READ;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = exynos_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
- }
-
- /* Read data */
- if (retval == 0)
- *data = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0);
-
- return retval;
-}
-
-int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
- unsigned int device_addr,
- unsigned int reg_addr,
- unsigned int count,
- unsigned char edid[])
-{
- u32 reg;
- unsigned int i, j;
- unsigned int cur_data_idx;
- unsigned int defer = 0;
- int retval = 0;
-
- for (i = 0; i < count; i += 16) {
- for (j = 0; j < 3; j++) {
- /* Clear AUX CH data buffer */
- reg = BUF_CLR;
- writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
-
- /* Set normal AUX CH command */
- reg = readl(dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
- reg &= ~ADDR_ONLY;
- writel(reg, dp->reg_base + EXYNOS_DP_AUX_CH_CTL_2);
-
- /*
- * If Rx sends defer, Tx sends only reads
- * request without sending address
- */
- if (!defer)
- retval = exynos_dp_select_i2c_device(
- dp, device_addr, reg_addr + i);
- else
- defer = 0;
-
- if (retval == 0) {
- /*
- * Set I2C transaction and write data
- * If bit 3 is 1, DisplayPort transaction.
- * If Bit 3 is 0, I2C transaction.
- */
- reg = AUX_LENGTH(16) |
- AUX_TX_COMM_I2C_TRANSACTION |
- AUX_TX_COMM_READ;
- writel(reg, dp->reg_base +
- EXYNOS_DP_AUX_CH_CTL_1);
-
- /* Start AUX transaction */
- retval = exynos_dp_start_aux_transaction(dp);
- if (retval == 0)
- break;
-
- dev_dbg(dp->dev, "%s: Aux Transaction fail!\n",
- __func__);
- }
- /* Check if Rx sends defer */
- reg = readl(dp->reg_base + EXYNOS_DP_AUX_RX_COMM);
- if (reg == AUX_RX_COMM_AUX_DEFER ||
- reg == AUX_RX_COMM_I2C_DEFER) {
- dev_err(dp->dev, "Defer: %d\n\n", reg);
- defer = 1;
- }
- }
-
- for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) {
- reg = readl(dp->reg_base + EXYNOS_DP_BUF_DATA_0
- + 4 * cur_data_idx);
- edid[i + cur_data_idx] = (unsigned char)reg;
- }
- }
-
- return retval;
-}
-
-void exynos_dp_set_link_bandwidth(struct exynos_dp_device *dp, u32 bwtype)
-{
- u32 reg;
-
- reg = bwtype;
- if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS))
- writel(reg, dp->reg_base + EXYNOS_DP_LINK_BW_SET);
-}
-
-void exynos_dp_get_link_bandwidth(struct exynos_dp_device *dp, u32 *bwtype)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LINK_BW_SET);
- *bwtype = reg;
-}
-
-void exynos_dp_set_lane_count(struct exynos_dp_device *dp, u32 count)
-{
- u32 reg;
-
- reg = count;
- writel(reg, dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
-}
-
-void exynos_dp_get_lane_count(struct exynos_dp_device *dp, u32 *count)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LANE_COUNT_SET);
- *count = reg;
-}
-
-void exynos_dp_enable_enhanced_mode(struct exynos_dp_device *dp, bool enable)
-{
- u32 reg;
-
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
- reg |= ENHANCED;
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
- reg &= ~ENHANCED;
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
- }
-}
-
-void exynos_dp_set_training_pattern(struct exynos_dp_device *dp,
- enum pattern_set pattern)
-{
- u32 reg;
-
- switch (pattern) {
- case PRBS7:
- reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
- writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
- break;
- case D10_2:
- reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
- writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
- break;
- case TRAINING_PTN1:
- reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
- writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
- break;
- case TRAINING_PTN2:
- reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
- writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
- break;
- case DP_NONE:
- reg = SCRAMBLING_ENABLE |
- LINK_QUAL_PATTERN_SET_DISABLE |
- SW_TRAINING_PATTERN_SET_NORMAL;
- writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
- break;
- default:
- break;
- }
-}
-
-void exynos_dp_set_lane0_pre_emphasis(struct exynos_dp_device *dp, u32 level)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
- reg &= ~PRE_EMPHASIS_SET_MASK;
- reg |= level << PRE_EMPHASIS_SET_SHIFT;
- writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane1_pre_emphasis(struct exynos_dp_device *dp, u32 level)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
- reg &= ~PRE_EMPHASIS_SET_MASK;
- reg |= level << PRE_EMPHASIS_SET_SHIFT;
- writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane2_pre_emphasis(struct exynos_dp_device *dp, u32 level)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
- reg &= ~PRE_EMPHASIS_SET_MASK;
- reg |= level << PRE_EMPHASIS_SET_SHIFT;
- writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane3_pre_emphasis(struct exynos_dp_device *dp, u32 level)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
- reg &= ~PRE_EMPHASIS_SET_MASK;
- reg |= level << PRE_EMPHASIS_SET_SHIFT;
- writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane0_link_training(struct exynos_dp_device *dp,
- u32 training_lane)
-{
- u32 reg;
-
- reg = training_lane;
- writel(reg, dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane1_link_training(struct exynos_dp_device *dp,
- u32 training_lane)
-{
- u32 reg;
-
- reg = training_lane;
- writel(reg, dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane2_link_training(struct exynos_dp_device *dp,
- u32 training_lane)
-{
- u32 reg;
-
- reg = training_lane;
- writel(reg, dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
-}
-
-void exynos_dp_set_lane3_link_training(struct exynos_dp_device *dp,
- u32 training_lane)
-{
- u32 reg;
-
- reg = training_lane;
- writel(reg, dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
-}
-
-u32 exynos_dp_get_lane0_link_training(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LN0_LINK_TRAINING_CTL);
- return reg;
-}
-
-u32 exynos_dp_get_lane1_link_training(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LN1_LINK_TRAINING_CTL);
- return reg;
-}
-
-u32 exynos_dp_get_lane2_link_training(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LN2_LINK_TRAINING_CTL);
- return reg;
-}
-
-u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_LN3_LINK_TRAINING_CTL);
- return reg;
-}
-
-void exynos_dp_reset_macro(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_PHY_TEST);
- reg |= MACRO_RST;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
-
- /* 10 us is the minimum reset time. */
- usleep_range(10, 20);
-
- reg &= ~MACRO_RST;
- writel(reg, dp->reg_base + EXYNOS_DP_PHY_TEST);
-}
-
-void exynos_dp_init_video(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
- writel(reg, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
-
- reg = 0x0;
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
-
- reg = CHA_CRI(4) | CHA_CTRL;
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
-
- reg = 0x0;
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-
- reg = VID_HRES_TH(2) | VID_VRES_TH(0);
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_8);
-}
-
-void exynos_dp_set_video_color_format(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- /* Configure the input color depth, color space, dynamic range */
- reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
- (dp->video_info->color_depth << IN_BPC_SHIFT) |
- (dp->video_info->color_space << IN_COLOR_F_SHIFT);
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_2);
-
- /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
- reg &= ~IN_YC_COEFFI_MASK;
- if (dp->video_info->ycbcr_coeff)
- reg |= IN_YC_COEFFI_ITU709;
- else
- reg |= IN_YC_COEFFI_ITU601;
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
-}
-
-int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_1);
-
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_1);
-
- if (!(reg & DET_STA)) {
- dev_dbg(dp->dev, "Input stream clock not detected.\n");
- return -EINVAL;
- }
-
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_2);
-
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_2);
- dev_dbg(dp->dev, "wait SYS_CTL_2.\n");
-
- if (reg & CHA_STA) {
- dev_dbg(dp->dev, "Input stream clk is changing\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
- enum clock_recovery_m_value_type type,
- u32 m_value,
- u32 n_value)
-{
- u32 reg;
-
- if (type == REGISTER_M) {
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
- reg |= FIX_M_VID;
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
- reg = m_value & 0xff;
- writel(reg, dp->reg_base + EXYNOS_DP_M_VID_0);
- reg = (m_value >> 8) & 0xff;
- writel(reg, dp->reg_base + EXYNOS_DP_M_VID_1);
- reg = (m_value >> 16) & 0xff;
- writel(reg, dp->reg_base + EXYNOS_DP_M_VID_2);
-
- reg = n_value & 0xff;
- writel(reg, dp->reg_base + EXYNOS_DP_N_VID_0);
- reg = (n_value >> 8) & 0xff;
- writel(reg, dp->reg_base + EXYNOS_DP_N_VID_1);
- reg = (n_value >> 16) & 0xff;
- writel(reg, dp->reg_base + EXYNOS_DP_N_VID_2);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_4);
- reg &= ~FIX_M_VID;
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_4);
-
- writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_0);
- writel(0x80, dp->reg_base + EXYNOS_DP_N_VID_1);
- writel(0x00, dp->reg_base + EXYNOS_DP_N_VID_2);
- }
-}
-
-void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type)
-{
- u32 reg;
-
- if (type == VIDEO_TIMING_FROM_CAPTURE) {
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
- reg &= ~FORMAT_SEL;
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
- reg |= FORMAT_SEL;
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
- }
-}
-
-void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable)
-{
- u32 reg;
-
- if (enable) {
- reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
- reg &= ~VIDEO_MODE_MASK;
- reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
- writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
- } else {
- reg = readl(dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
- reg &= ~VIDEO_MODE_MASK;
- reg |= VIDEO_MODE_SLAVE_MODE;
- writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
- }
-}
-
-void exynos_dp_start_video(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
- reg |= VIDEO_EN;
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_1);
-}
-
-int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
- writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
-
- reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
- if (!(reg & STRM_VALID)) {
- dev_dbg(dp->dev, "Input video stream is not detected.\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_FUNC_EN_1);
- reg &= ~(MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N);
- reg |= MASTER_VID_FUNC_EN_N;
- writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_1);
-
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
- reg &= ~INTERACE_SCAN_CFG;
- reg |= (dp->video_info->interlaced << 2);
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
- reg &= ~VSYNC_POLARITY_CFG;
- reg |= (dp->video_info->v_sync_polarity << 1);
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-
- reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
- reg &= ~HSYNC_POLARITY_CFG;
- reg |= (dp->video_info->h_sync_polarity << 0);
- writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
-
- reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
- writel(reg, dp->reg_base + EXYNOS_DP_SOC_GENERAL_CTL);
-}
-
-void exynos_dp_enable_scrambling(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
- reg &= ~SCRAMBLING_DISABLE;
- writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-}
-
-void exynos_dp_disable_scrambling(struct exynos_dp_device *dp)
-{
- u32 reg;
-
- reg = readl(dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
- reg |= SCRAMBLING_DISABLE;
- writel(reg, dp->reg_base + EXYNOS_DP_TRAINING_PTN_SET);
-}
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
new file mode 100644
index 0000000..9a207f8
--- /dev/null
+++ b/include/drm/bridge/analogix_dp.h
@@ -0,0 +1,22 @@
+#ifndef _ANALOGIX_DP_H_
+#define _ANALOGIX_DP_H_
+
+#include <drm/drm_crtc.h>
+
+struct analogix_dp_plat_data {
+ struct drm_panel *panel;
+
+ int (*power_on)(struct analogix_dp_plat_data *);
+ int (*power_off)(struct analogix_dp_plat_data *);
+ int (*attach)(struct analogix_dp_plat_data *, struct drm_bridge *);
+};
+
+int analogix_dp_resume(struct device *dev);
+int analogix_dp_suspend(struct device *dev);
+
+int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
+ struct drm_encoder *encoder,
+ struct analogix_dp_plat_data *plat_data);
+void analogix_dp_unbind(struct device *dev, struct device *master, void *data);
+
+#endif /* _ANALOGIX_DP_H_ */
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
` (2 preceding siblings ...)
2015-08-07 10:43 ` [PATCH v2 3/8] drm: bridge: analogix_dp: split exynos dp driver to bridge dir Yakir Yang
@ 2015-08-07 10:46 ` Yakir Yang
2015-08-07 22:46 ` Heiko Stübner
2015-08-07 10:46 ` [PATCH v2 5/8] drm: bridge/analogix_dp: add platform device type support Yakir Yang
` (3 subsequent siblings)
7 siblings, 1 reply; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:46 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 419 ++++++++++++++++++++++++
3 files changed, 430 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..096ed77 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+
+config ROCKCHIP_ANALOGIX_DP
+ tristate "Rockchip specific extensions for Analogix DP driver"
+ depends on DRM_ROCKCHIP
+ select DRM_ANALOGIX_DP
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Analogix Core DP driver. If you want to enable DP
+ on RK3288 based SoC, you should selet this option.
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..8ad01fb 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
new file mode 100644
index 0000000..2f86e5e
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -0,0 +1,419 @@
+/*
+ * Rockchip SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ * Yakir Yang <ykk@rock-chips.com>
+ * Jeff Chen <jeff.chen@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_of.h>
+#include <drm/drm_dp_helper.h>
+
+#include <linux/component.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#include <drm/bridge/analogix_dp.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define encoder_to_dp(c) \
+ container_of(c, struct rockchip_dp_device, encoder)
+
+#define plat_data_to_dp(pd) \
+ container_of(pd, struct rockchip_dp_device, plat_data)
+
+/* dp grf register offset */
+#define DP_VOP_SEL 0x025c /* grf_soc_con6 */
+#define DP_REF_CLK_SEL 0x0274 /* grf_soc_con12 */
+
+#define GRF_DP_REF_CLK_SEL_INTER BIT(4)
+#define DP_SEL_VOP_LIT BIT(5)
+
+struct rockchip_dp_device {
+ struct drm_device *drm_dev;
+ struct device *dev;
+ struct drm_encoder encoder;
+ struct drm_display_mode mode;
+
+ struct clk *clk_dp;
+ struct clk *clk_24m_parent;
+ struct clk *clk_24m;
+ struct regmap *grf;
+ struct reset_control *rst;
+
+ struct analogix_dp_plat_data plat_data;
+};
+
+static int rockchip_dp_clk_enable(struct rockchip_dp_device *dp)
+{
+ int ret = 0;
+
+ ret = clk_prepare_enable(dp->clk_dp);
+ if (ret < 0) {
+ dev_err(dp->dev, "cannot enable clk_dp %d\n", ret);
+ goto err_clk_dp;
+ }
+
+ ret = clk_set_rate(dp->clk_24m, 24000000);
+ if (ret < 0) {
+ dev_err(dp->dev, "cannot set dp clk_24m %d\n",
+ ret);
+ goto err_clk_24m;
+ }
+
+ ret = clk_prepare_enable(dp->clk_24m);
+ if (ret < 0) {
+ dev_err(dp->dev, "cannot enable dp clk_24m %d\n",
+ ret);
+ goto err_clk_24m;
+ }
+
+ return 0;
+
+err_clk_24m:
+ clk_disable_unprepare(dp->clk_dp);
+err_clk_dp:
+ return ret;
+}
+
+static int rockchip_dp_clk_disable(struct rockchip_dp_device *dp)
+{
+ clk_disable_unprepare(dp->clk_dp);
+ clk_disable_unprepare(dp->clk_24m);
+
+ return 0;
+}
+
+static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
+{
+ u32 val;
+ int ret;
+
+ val = GRF_DP_REF_CLK_SEL_INTER | (GRF_DP_REF_CLK_SEL_INTER << 16);
+ ret = regmap_write(dp->grf, DP_REF_CLK_SEL, val);
+ if (ret != 0) {
+ dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
+ return ret;
+ }
+
+ reset_control_assert(dp->rst);
+ usleep_range(10, 20);
+ reset_control_deassert(dp->rst);
+
+ return 0;
+}
+
+static int rockchip_dp_poweron(struct analogix_dp_plat_data *plat_data)
+{
+ struct rockchip_dp_device *dp = plat_data_to_dp(plat_data);
+ int ret;
+
+ ret = rockchip_dp_clk_enable(dp);
+ if (ret < 0) {
+ dev_err(dp->dev, "cannot enable dp clk %d\n", ret);
+ return -1;
+ }
+
+ ret = rockchip_dp_pre_init(dp);
+ if (ret < 0) {
+ dev_err(dp->dev, "dp pre init fail %d\n", ret);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int rockchip_dp_poweroff(struct analogix_dp_plat_data *plat_data)
+{
+ struct rockchip_dp_device *dp = plat_data_to_dp(plat_data);
+
+ rockchip_dp_clk_disable(dp);
+
+ return 0;
+}
+
+static bool
+rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ /* do nothing */
+ return true;
+}
+
+static void rockchip_dp_drm_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted)
+{
+ /* do nothing */
+}
+
+static void rockchip_dp_drm_encoder_prepare(struct drm_encoder *encoder)
+{
+ struct rockchip_dp_device *dp = encoder_to_dp(encoder);
+ u32 val;
+ int ret;
+
+ ret = rockchip_drm_crtc_mode_config(encoder->crtc,
+ DRM_MODE_CONNECTOR_eDP,
+ ROCKCHIP_OUT_MODE_AAAA);
+ if (ret < 0) {
+ dev_err(dp->dev, "Could not set crtc mode config: %d.\n", ret);
+ return;
+ }
+
+ ret = rockchip_drm_encoder_get_mux_id(dp->dev->of_node, encoder);
+ if (ret < 0)
+ return;
+
+ if (ret)
+ val = DP_SEL_VOP_LIT | (DP_SEL_VOP_LIT << 16);
+ else
+ val = DP_SEL_VOP_LIT << 16;
+
+ dev_info(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
+
+ ret = regmap_write(dp->grf, DP_VOP_SEL, val);
+ if (ret != 0) {
+ dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
+ return;
+ }
+}
+
+static void rockchip_dp_drm_encoder_nop(struct drm_encoder *encoder)
+{
+ /* do nothing */
+}
+
+static struct drm_encoder_helper_funcs rockchip_dp_encoder_helper_funcs = {
+ .mode_fixup = rockchip_dp_drm_encoder_mode_fixup,
+ .mode_set = rockchip_dp_drm_encoder_mode_set,
+ .prepare = rockchip_dp_drm_encoder_prepare,
+ .commit = rockchip_dp_drm_encoder_nop,
+ .disable = rockchip_dp_drm_encoder_nop,
+};
+
+static void rockchip_dp_drm_encoder_destroy(struct drm_encoder *encoder)
+{
+ drm_encoder_cleanup(encoder);
+}
+
+static struct drm_encoder_funcs rockchip_dp_encoder_funcs = {
+ .destroy = rockchip_dp_drm_encoder_destroy,
+};
+
+static int rockchip_dp_init(struct rockchip_dp_device *dp)
+{
+ struct device *dev = dp->dev;
+ struct device_node *np = dev->of_node;
+ int ret;
+
+ dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+ if (IS_ERR(dp->grf)) {
+ dev_err(dev,
+ "rk3288-dp needs rockchip,grf property\n");
+ return PTR_ERR(dp->grf);
+ }
+
+ dp->clk_dp = devm_clk_get(dev, "clk_dp");
+ if (IS_ERR(dp->clk_dp)) {
+ dev_err(dev, "cannot get clk_dp\n");
+ return PTR_ERR(dp->clk_dp);
+ }
+
+ dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
+ if (IS_ERR(dp->clk_24m)) {
+ dev_err(dev, "cannot get clk_dp_24m\n");
+ return PTR_ERR(dp->clk_24m);
+ }
+
+ dp->rst = devm_reset_control_get(dev, "dp");
+ if (IS_ERR(dp->rst)) {
+ dev_err(dev, "failed to get reset\n");
+ return PTR_ERR(dp->rst);
+ }
+
+ ret = rockchip_dp_clk_enable(dp);
+ if (ret < 0) {
+ dev_err(dp->dev, "cannot enable dp clk %d\n", ret);
+ return ret;
+ }
+
+ ret = rockchip_dp_pre_init(dp);
+ if (ret < 0) {
+ dev_err(dp->dev, "failed to pre init %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rockchip_dp_drm_create_encoder(struct rockchip_dp_device *dp)
+{
+ struct drm_encoder *encoder = &dp->encoder;
+ struct drm_device *drm_dev = dp->drm_dev;
+ struct device *dev = dp->dev;
+ int ret;
+
+ encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
+ dev->of_node);
+ DRM_DEBUG_KMS("possible_crtcs = 0x%x\n", encoder->possible_crtcs);
+
+ ret = drm_encoder_init(drm_dev, encoder, &rockchip_dp_encoder_funcs,
+ DRM_MODE_ENCODER_TMDS);
+ if (ret) {
+ DRM_ERROR("failed to initialize encoder with drm\n");
+ return ret;
+ }
+
+ drm_encoder_helper_add(encoder, &rockchip_dp_encoder_helper_funcs);
+
+ return 0;
+}
+
+static int rockchip_dp_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct rockchip_dp_device *dp = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ int ret;
+
+ /*
+ * Just like the probe function said, we don't need the
+ * device drvrate anymore, we should leave the charge to
+ * analogix dp driver, set the device drvdata to NULL.
+ */
+ dev_set_drvdata(dev, NULL);
+
+ ret = rockchip_dp_init(dp);
+ if (ret < 0)
+ return ret;
+
+ dp->drm_dev = drm_dev;
+
+ ret = rockchip_dp_drm_create_encoder(dp);
+ if (ret) {
+ DRM_ERROR("failed to create drm encoder\n");
+ return ret;
+ }
+
+ dp->plat_data.attach = NULL;
+ dp->plat_data.power_on = rockchip_dp_poweron;
+ dp->plat_data.power_off = rockchip_dp_poweroff;
+
+ return analogix_dp_bind(dev, dp->drm_dev, &dp->encoder,
+ &dp->plat_data);
+}
+
+static void rockchip_dp_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ return analogix_dp_unbind(dev, master, data);
+}
+
+static const struct component_ops rockchip_dp_component_ops = {
+ .bind = rockchip_dp_bind,
+ .unbind = rockchip_dp_unbind,
+};
+
+static int rockchip_dp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *panel_node;
+ struct rockchip_dp_device *dp;
+ struct drm_panel *panel;
+
+ panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
+ if (!panel_node) {
+ DRM_ERROR("failed to find rockchip,panel dt node\n");
+ return -ENODEV;
+ }
+
+ panel = of_drm_find_panel(panel_node);
+ if (!panel) {
+ DRM_ERROR("failed to find panel\n");
+ of_node_put(panel_node);
+ return -EPROBE_DEFER;
+ }
+
+ of_node_put(panel_node);
+
+ dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+ if (!dp)
+ return -ENOMEM;
+
+ dp->dev = dev;
+
+ dp->plat_data.panel = panel;
+
+ /*
+ * We just use the drvdata until driver run into component
+ * add function, and then we would set drvdata to null, so
+ * that analogix dp driver could take charge of the drvdata.
+ */
+ platform_set_drvdata(pdev, dp);
+
+ return component_add(dev, &rockchip_dp_component_ops);
+}
+
+static int rockchip_dp_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &rockchip_dp_component_ops);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rockchip_dp_suspend(struct device *dev)
+{
+ return analogix_dp_suspend(dev);
+}
+
+static int rockchip_dp_resume(struct device *dev)
+{
+ return analogix_dp_resume(dev);
+}
+#endif
+
+static const struct dev_pm_ops rockchip_dp_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
+};
+
+static const struct of_device_id rockchip_dp_dt_ids[] = {
+ {.compatible = "rockchip,rk3288-dp",},
+ {}
+};
+MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
+
+static struct platform_driver rockchip_dp_driver = {
+ .probe = rockchip_dp_probe,
+ .remove = rockchip_dp_remove,
+ .driver = {
+ .name = "rockchip-dp",
+ .owner = THIS_MODULE,
+ .pm = &rockchip_dp_pm_ops,
+ .of_match_table = of_match_ptr(rockchip_dp_dt_ids),
+ },
+};
+
+module_platform_driver(rockchip_dp_driver);
+
+MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
+MODULE_AUTHOR("Jeff chen <jeff.chen@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip Specific Analogix-DP Driver Extension");
+MODULE_LICENSE("GPL v2");
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 5/8] drm: bridge/analogix_dp: add platform device type support
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
` (3 preceding siblings ...)
2015-08-07 10:46 ` [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver Yakir Yang
@ 2015-08-07 10:46 ` Yakir Yang
2015-08-07 10:49 ` [PATCH v2 6/8] drm: bridge: analogix_dp: add some rk3288 special registers setting Yakir Yang
` (2 subsequent siblings)
7 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:46 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- Add GNU license v2 declared and samsung copyright
drivers/gpu/drm/exynos/analogix_dp-exynos.c | 1 +
drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 1 +
include/drm/bridge/analogix_dp.h | 16 ++++++++++++++++
3 files changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/exynos/analogix_dp-exynos.c b/drivers/gpu/drm/exynos/analogix_dp-exynos.c
index 1468ce7..5a2027d 100644
--- a/drivers/gpu/drm/exynos/analogix_dp-exynos.c
+++ b/drivers/gpu/drm/exynos/analogix_dp-exynos.c
@@ -122,6 +122,7 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
dp->dev = dev;
dp->drm_dev = drm_dev;
+ dp->plat_data.dev_type = EXYNOS_DP;
dp->plat_data.power_on = exynos_dp_poweron;
dp->plat_data.power_off = exynos_dp_poweroff;
dp->plat_data.attach = exynos_dp_bridge_attach;
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index 2f86e5e..e7cf9ab 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -312,6 +312,7 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
return ret;
}
+ dp->plat_data.dev_type = RK3288_DP;
dp->plat_data.attach = NULL;
dp->plat_data.power_on = rockchip_dp_poweron;
dp->plat_data.power_off = rockchip_dp_poweroff;
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 9a207f8..d5f9a5b 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -1,9 +1,25 @@
+/*
+ * Analogix Core DP (Display Port) interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
#ifndef _ANALOGIX_DP_H_
#define _ANALOGIX_DP_H_
#include <drm/drm_crtc.h>
+enum analogix_dp_devtype {
+ EXYNOS_DP,
+ RK3288_DP,
+};
+
struct analogix_dp_plat_data {
+ enum analogix_dp_devtype dev_type;
struct drm_panel *panel;
int (*power_on)(struct analogix_dp_plat_data *);
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 6/8] drm: bridge: analogix_dp: add some rk3288 special registers setting
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
` (4 preceding siblings ...)
2015-08-07 10:46 ` [PATCH v2 5/8] drm: bridge/analogix_dp: add platform device type support Yakir Yang
@ 2015-08-07 10:49 ` Yakir Yang
2015-08-07 10:51 ` [PATCH v2 7/8] drm: bridge: analogix_dp: try force hpd after plug in lookup failed Yakir Yang
2015-08-07 10:54 ` [PATCH v2 8/8] drm: bridge/analogix_dp: expand the delay time for hpd detect Yakir Yang
7 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:49 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
RK3288 need some special registers setting, we can separate
them out by the dev_type of plat_data.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2:
- Fix compile failed dut to phy_pd_addr variable misspell error
drivers/gpu/drm/bridge/analogix_dp_reg.c | 76 ++++++++++++++++++++------------
drivers/gpu/drm/bridge/analogix_dp_reg.h | 12 +++++
2 files changed, 60 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix_dp_reg.c
index cc5cdbf..a0fc1fb 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix_dp_reg.c
@@ -15,6 +15,8 @@
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <drm/bridge/analogix_dp.h>
+
#include "analogix_dp_core.h"
#include "analogix_dp_reg.h"
@@ -72,6 +74,14 @@ void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
reg = SEL_24M | TX_DVDD_BIT_1_0625V;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP)) {
+ writel(REF_CLK_24M, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+ writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
+ writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
+ writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
+ writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
+ }
+
reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
@@ -206,81 +216,85 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
bool enable)
{
u32 reg;
+ u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ phy_pd_addr = ANALOGIX_DP_PD;
switch (block) {
case AUX_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~AUX_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH0_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH1_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH1_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH2_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH2_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH2_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case CH3_BLOCK:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= CH3_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~CH3_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case ANALOG_TOTAL:
if (enable) {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg |= DP_PHY_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- reg = readl(dp->reg_base + ANALOGIX_DP_PHY_PD);
+ reg = readl(dp->reg_base + phy_pd_addr);
reg &= ~DP_PHY_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
}
break;
case POWER_ALL:
if (enable) {
reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
CH1_PD | CH0_PD;
- writel(reg, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(reg, dp->reg_base + phy_pd_addr);
} else {
- writel(0x00, dp->reg_base + ANALOGIX_DP_PHY_PD);
+ writel(0x00, dp->reg_base + phy_pd_addr);
}
break;
default:
@@ -399,8 +413,14 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
analogix_dp_reset_aux(dp);
/* Disable AUX transaction H/W retry */
- reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(0) |
- AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+ if (dp->plat_data && (dp->plat_data->dev_type == RK3288_DP))
+ reg = AUX_BIT_PERIOD_EXPECTED_DELAY(0) |
+ AUX_HW_RETRY_COUNT_SEL(3) |
+ AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+ else
+ reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) |
+ AUX_HW_RETRY_COUNT_SEL(0) |
+ AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL);
/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
diff --git a/drivers/gpu/drm/bridge/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix_dp_reg.h
index bed226f..e38af21 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix_dp_reg.h
@@ -22,6 +22,14 @@
#define ANALOGIX_DP_VIDEO_CTL_8 0x3C
#define ANALOGIX_DP_VIDEO_CTL_10 0x44
+#define ANALOGIX_DP_PLL_REG_1 0xfc
+#define ANALOGIX_DP_PLL_REG_2 0x9e4
+#define ANALOGIX_DP_PLL_REG_3 0x9e8
+#define ANALOGIX_DP_PLL_REG_4 0x9ec
+#define ANALOGIX_DP_PLL_REG_5 0xa00
+
+#define ANALOGIX_DP_PD 0x12c
+
#define ANALOGIX_DP_LANE_MAP 0x35C
#define ANALOGIX_DP_ANALOG_CTL_1 0x370
@@ -154,6 +162,10 @@
#define VSYNC_POLARITY_CFG (0x1 << 1)
#define HSYNC_POLARITY_CFG (0x1 << 0)
+/* ANALOGIX_DP_PLL_REG_1 */
+#define REF_CLK_24M (0x1 << 1)
+#define REF_CLK_27M (0x0 << 1)
+
/* ANALOGIX_DP_LANE_MAP */
#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 7/8] drm: bridge: analogix_dp: try force hpd after plug in lookup failed
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
` (5 preceding siblings ...)
2015-08-07 10:49 ` [PATCH v2 6/8] drm: bridge: analogix_dp: add some rk3288 special registers setting Yakir Yang
@ 2015-08-07 10:51 ` Yakir Yang
2015-08-07 10:54 ` [PATCH v2 8/8] drm: bridge/analogix_dp: expand the delay time for hpd detect Yakir Yang
7 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:51 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
Some edp screen do not have hpd signal, so we can't just return
failed when hpd plug in detect failed.
Besides TRM indicate that if HPD_STATUS(RO) is 0, AUX CH will not
work, so we need to give a force hpd action to set HPD_STATUS manually.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None
drivers/gpu/drm/bridge/analogix_dp_core.c | 28 +++++++++++++++++++++++-----
drivers/gpu/drm/bridge/analogix_dp_core.h | 1 +
drivers/gpu/drm/bridge/analogix_dp_reg.c | 9 +++++++++
3 files changed, 33 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix_dp_core.c
index 44be01d..efd810c 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.c
@@ -66,15 +66,33 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
{
int timeout_loop = 0;
- while (analogix_dp_get_plug_in_status(dp) != 0) {
+ while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+ if (analogix_dp_get_plug_in_status(dp) == 0)
+ return 0;
+
timeout_loop++;
- if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
- dev_err(dp->dev, "failed to get hpd plug status\n");
- return -ETIMEDOUT;
- }
usleep_range(10, 11);
}
+ /*
+ * Some edp screen do not have hpd signal, so we can't just
+ * return failed when hpd plug in detect failed.
+ *
+ * Besides TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+ * will not work, so we need to give a force hpd action to
+ * set HPD_STATUS manually.
+ */
+ dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n");
+
+ analogix_dp_force_hpd(dp);
+
+ if (analogix_dp_get_plug_in_status(dp) != 0) {
+ dev_err(dp->dev, "failed to get hpd plug in status\n");
+ return -ETIMEDOUT;
+ }
+
+ dev_dbg(dp->dev, "success to get plug in status after force hpd\n");
+
return 0;
}
diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix_dp_core.h
index 713c57f..53f3973 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.h
@@ -182,6 +182,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
bool enable);
void analogix_dp_init_analog_func(struct analogix_dp_device *dp);
void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+void analogix_dp_force_hpd(struct analogix_dp_device *dp);
enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
void analogix_dp_reset_aux(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix_dp_reg.c
index a0fc1fb..bf7cee1 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix_dp_reg.c
@@ -365,6 +365,15 @@ void analogix_dp_init_hpd(struct analogix_dp_device *dp)
writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
}
+void analogix_dp_force_hpd(struct analogix_dp_device *dp)
+{
+ u32 reg;
+
+ reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+ reg = (F_HPD | HPD_CTRL);
+ writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
{
u32 reg;
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v2 8/8] drm: bridge/analogix_dp: expand the delay time for hpd detect
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
` (6 preceding siblings ...)
2015-08-07 10:51 ` [PATCH v2 7/8] drm: bridge: analogix_dp: try force hpd after plug in lookup failed Yakir Yang
@ 2015-08-07 10:54 ` Yakir Yang
7 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-07 10:54 UTC (permalink / raw)
To: Heiko Stuebner, Russell King, Fabio Estevam, Jingoo Han, Inki Dae
Cc: djkurtz, dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel, Yakir Yang
Some edp screen with no hpd signal would need some delay time
to ensure that screen would be ready for work, so we can expand
the delay time in hpd detect function, it works prefectly on my
rk3288 sdk board.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v2: None
drivers/gpu/drm/bridge/analogix_dp_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix_dp_core.c
index efd810c..3ba10fa2 100644
--- a/drivers/gpu/drm/bridge/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix_dp_core.c
@@ -71,7 +71,7 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
return 0;
timeout_loop++;
- usleep_range(10, 11);
+ usleep_range(100, 110);
}
/*
--
1.9.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-07 10:46 ` [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver Yakir Yang
@ 2015-08-07 22:46 ` Heiko Stübner
2015-08-08 3:54 ` Yakir Yang
0 siblings, 1 reply; 17+ messages in thread
From: Heiko Stübner @ 2015-08-07 22:46 UTC (permalink / raw)
To: Yakir Yang
Cc: Russell King, Fabio Estevam, Jingoo Han, Inki Dae, djkurtz,
dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-kernel
Hi Yakir,
I think this Rockchip portion is missing a devicetree binding.
You have the ability to power down the actual edp phy by using
grf_edp_iddq_en from GRF_SOC_CON12. This is similar to how the
rk3288 usb-phy gets put into a deeper state. So maybe you could
provide a phy driver (drivers/phy) for this similar to what the
exynos-dp does.
Some more stuff inline. But I guess by no means complete, as I'm
still trying to integrate this into my development-tree.
Am Freitag, 7. August 2015, 05:46:20 schrieb Yakir Yang:
> Rockchip have three clocks for dp controller, we leave pclk_edp
> to analogix_dp driver control, and keep the sclk_edp_24m and
> sclk_edp in platform driver.
>
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---
> Changes in v2: None
>
> drivers/gpu/drm/rockchip/Kconfig | 10 +
> drivers/gpu/drm/rockchip/Makefile | 1 +
> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 419
> ++++++++++++++++++++++++ 3 files changed, 430 insertions(+)
> create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>
> diff --git a/drivers/gpu/drm/rockchip/Kconfig
> b/drivers/gpu/drm/rockchip/Kconfig index 35215f6..096ed77 100644
> --- a/drivers/gpu/drm/rockchip/Kconfig
> +++ b/drivers/gpu/drm/rockchip/Kconfig
> @@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
> for the Synopsys DesignWare HDMI driver. If you want to
> enable HDMI on RK3288 based SoC, you should selet this
> option.
> +
> +
nit: double blank line
> +config ROCKCHIP_ANALOGIX_DP
> + tristate "Rockchip specific extensions for Analogix DP driver"
> + depends on DRM_ROCKCHIP
> + select DRM_ANALOGIX_DP
> + help
> + This selects support for Rockchip SoC specific extensions
> + for the Analogix Core DP driver. If you want to enable DP
> + on RK3288 based SoC, you should selet this option.
[...]
> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c new file mode 100644
> index 0000000..2f86e5e
> --- /dev/null
> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> @@ -0,0 +1,419 @@
> +/*
> + * Rockchip SoC DP (Display Port) interface driver.
> + *
> + * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
> + * Author: Andy Yan <andy.yan@rock-chips.com>
> + * Yakir Yang <ykk@rock-chips.com>
> + * Jeff Chen <jeff.chen@rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_dp_helper.h>
> +
> +#include <linux/component.h>
> +#include <linux/clk.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +#include <drm/bridge/analogix_dp.h>
> +
> +#include "rockchip_drm_drv.h"
> +#include "rockchip_drm_vop.h"
> +
> +#define encoder_to_dp(c) \
> + container_of(c, struct rockchip_dp_device, encoder)
> +
> +#define plat_data_to_dp(pd) \
> + container_of(pd, struct rockchip_dp_device, plat_data)
> +
> +/* dp grf register offset */
> +#define DP_VOP_SEL 0x025c /* grf_soc_con6 */
> +#define DP_REF_CLK_SEL 0x0274 /* grf_soc_con12 */
> +
> +#define GRF_DP_REF_CLK_SEL_INTER BIT(4)
> +#define DP_SEL_VOP_LIT BIT(5)
> +
> +struct rockchip_dp_device {
> + struct drm_device *drm_dev;
> + struct device *dev;
> + struct drm_encoder encoder;
> + struct drm_display_mode mode;
> +
> + struct clk *clk_dp;
> + struct clk *clk_24m_parent;
this clk_24m_parent does not seem used at all
> + struct clk *clk_24m;
> + struct regmap *grf;
> + struct reset_control *rst;
> +
> + struct analogix_dp_plat_data plat_data;
> +};
> +
[...]
> +static int rockchip_dp_init(struct rockchip_dp_device *dp)
> +{
> + struct device *dev = dp->dev;
> + struct device_node *np = dev->of_node;
> + int ret;
> +
> + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> + if (IS_ERR(dp->grf)) {
> + dev_err(dev,
> + "rk3288-dp needs rockchip,grf property\n");
> + return PTR_ERR(dp->grf);
> + }
> +
> + dp->clk_dp = devm_clk_get(dev, "clk_dp");
I've looked at the manual, but couldn't find an actual clock-name
used there. Is it really "clk_dp" or should it just be "dp"?
> + if (IS_ERR(dp->clk_dp)) {
> + dev_err(dev, "cannot get clk_dp\n");
> + return PTR_ERR(dp->clk_dp);
> + }
> +
> + dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
Same here, maybe "dp_24m".
> + if (IS_ERR(dp->clk_24m)) {
> + dev_err(dev, "cannot get clk_dp_24m\n");
> + return PTR_ERR(dp->clk_24m);
> + }
I think you're missing the pclk here (PCLK_EDP_CTRL) or is this part of
something else?
> +
> + dp->rst = devm_reset_control_get(dev, "dp");
> + if (IS_ERR(dp->rst)) {
> + dev_err(dev, "failed to get reset\n");
> + return PTR_ERR(dp->rst);
> + }
> +
> + ret = rockchip_dp_clk_enable(dp);
> + if (ret < 0) {
> + dev_err(dp->dev, "cannot enable dp clk %d\n", ret);
> + return ret;
> + }
> +
> + ret = rockchip_dp_pre_init(dp);
> + if (ret < 0) {
> + dev_err(dp->dev, "failed to pre init %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
[...]
> +static int rockchip_dp_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *panel_node;
> + struct rockchip_dp_device *dp;
> + struct drm_panel *panel;
> +
> + panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
> + if (!panel_node) {
> + DRM_ERROR("failed to find rockchip,panel dt node\n");
> + return -ENODEV;
> + }
Personally I would prefer to continue with the of-graph framework to
attach the panel instead of defining a special node. But I'm not
authorative on this. But that way the dts could then look like [0].
I've sucessfully modified the driver currently in use in Chromeos for my
dev-tree and have ported this change over onto your driver [1].
[0] https://github.com/mmind/linux-rockchip/blob/devel/somewhat-stable/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#L76
[1]
---------- 8< -------------
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index e7cf9ab..24e872d 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -20,6 +20,7 @@
#include <linux/component.h>
#include <linux/clk.h>
#include <linux/mfd/syscon.h>
+#include <linux/of_graph.h>
#include <linux/regmap.h>
#include <linux/reset.h>
@@ -335,14 +336,28 @@ static const struct component_ops rockchip_dp_component_ops = {
static int rockchip_dp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *panel_node;
+ struct device_node *panel_node, *port, *endpoint;
struct rockchip_dp_device *dp;
struct drm_panel *panel;
- panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
+ port = of_graph_get_port_by_id(dev->of_node, 1);
+ if (!port) {
+ dev_err(dev, "can't find output port\n");
+ return -EINVAL;
+ }
+
+ endpoint = of_get_child_by_name(port, "endpoint");
+ of_node_put(port);
+ if (!endpoint) {
+ dev_err(dev, "no output endpoint found\n");
+ return -EINVAL;
+ }
+
+ panel_node = of_graph_get_remote_port_parent(endpoint);
+ of_node_put(endpoint);
if (!panel_node) {
- DRM_ERROR("failed to find rockchip,panel dt node\n");
- return -ENODEV;
+ dev_err(&pdev->dev, "no output node found\n");
+ return -EINVAL;
}
panel = of_drm_find_panel(panel_node);
---------- 8< -------------
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-07 22:46 ` Heiko Stübner
@ 2015-08-08 3:54 ` Yakir Yang
2015-08-10 10:00 ` Thierry Reding
2015-08-10 12:08 ` Heiko Stübner
0 siblings, 2 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-08 3:54 UTC (permalink / raw)
To: Heiko Stübner
Cc: Russell King, Fabio Estevam, Jingoo Han, Inki Dae, djkurtz,
dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-ker, nel
Hi Hekio,
在 2015/8/8 6:46, Heiko Stübner 写道:
> Hi Yakir,
>
>
> I think this Rockchip portion is missing a devicetree binding.
Oh, thanks, I would complete it in next ;)
> You have the ability to power down the actual edp phy by using
> grf_edp_iddq_en from GRF_SOC_CON12. This is similar to how the
> rk3288 usb-phy gets put into a deeper state. So maybe you could
> provide a phy driver (drivers/phy) for this similar to what the
> exynos-dp does.
Okay, so I need to add a new phy-rockchip-dp.c, include
power_on/power_off ops, thanks.
>
> Some more stuff inline. But I guess by no means complete, as I'm
> still trying to integrate this into my development-tree.
>
>
> Am Freitag, 7. August 2015, 05:46:20 schrieb Yakir Yang:
>> Rockchip have three clocks for dp controller, we leave pclk_edp
>> to analogix_dp driver control, and keep the sclk_edp_24m and
>> sclk_edp in platform driver.
>>
>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>> ---
>> Changes in v2: None
>>
>> drivers/gpu/drm/rockchip/Kconfig | 10 +
>> drivers/gpu/drm/rockchip/Makefile | 1 +
>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 419
>> ++++++++++++++++++++++++ 3 files changed, 430 insertions(+)
>> create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>
>> diff --git a/drivers/gpu/drm/rockchip/Kconfig
>> b/drivers/gpu/drm/rockchip/Kconfig index 35215f6..096ed77 100644
>> --- a/drivers/gpu/drm/rockchip/Kconfig
>> +++ b/drivers/gpu/drm/rockchip/Kconfig
>> @@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
>> for the Synopsys DesignWare HDMI driver. If you want to
>> enable HDMI on RK3288 based SoC, you should selet this
>> option.
>> +
>> +
> nit: double blank line
Done,
>
>> +config ROCKCHIP_ANALOGIX_DP
>> + tristate "Rockchip specific extensions for Analogix DP driver"
>> + depends on DRM_ROCKCHIP
>> + select DRM_ANALOGIX_DP
>> + help
>> + This selects support for Rockchip SoC specific extensions
>> + for the Analogix Core DP driver. If you want to enable DP
>> + on RK3288 based SoC, you should selet this option.
> [...]
>
>
>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c new file mode 100644
>> index 0000000..2f86e5e
>> --- /dev/null
>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> @@ -0,0 +1,419 @@
>> +/*
>> + * Rockchip SoC DP (Display Port) interface driver.
>> + *
>> + * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
>> + * Author: Andy Yan <andy.yan@rock-chips.com>
>> + * Yakir Yang <ykk@rock-chips.com>
>> + * Jeff Chen <jeff.chen@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +#include <drm/drmP.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_dp_helper.h>
>> +
>> +#include <linux/component.h>
>> +#include <linux/clk.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +
>> +#include <video/of_videomode.h>
>> +#include <video/videomode.h>
>> +
>> +#include <drm/bridge/analogix_dp.h>
>> +
>> +#include "rockchip_drm_drv.h"
>> +#include "rockchip_drm_vop.h"
>> +
>> +#define encoder_to_dp(c) \
>> + container_of(c, struct rockchip_dp_device, encoder)
>> +
>> +#define plat_data_to_dp(pd) \
>> + container_of(pd, struct rockchip_dp_device, plat_data)
>> +
>> +/* dp grf register offset */
>> +#define DP_VOP_SEL 0x025c /* grf_soc_con6 */
>> +#define DP_REF_CLK_SEL 0x0274 /* grf_soc_con12 */
>> +
>> +#define GRF_DP_REF_CLK_SEL_INTER BIT(4)
>> +#define DP_SEL_VOP_LIT BIT(5)
>> +
>> +struct rockchip_dp_device {
>> + struct drm_device *drm_dev;
>> + struct device *dev;
>> + struct drm_encoder encoder;
>> + struct drm_display_mode mode;
>> +
>> + struct clk *clk_dp;
>> + struct clk *clk_24m_parent;
> this clk_24m_parent does not seem used at all
Done,
>> + struct clk *clk_24m;
>> + struct regmap *grf;
>> + struct reset_control *rst;
>> +
>> + struct analogix_dp_plat_data plat_data;
>> +};
>> +
> [...]
>
>> +static int rockchip_dp_init(struct rockchip_dp_device *dp)
>> +{
>> + struct device *dev = dp->dev;
>> + struct device_node *np = dev->of_node;
>> + int ret;
>> +
>> + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
>> + if (IS_ERR(dp->grf)) {
>> + dev_err(dev,
>> + "rk3288-dp needs rockchip,grf property\n");
>> + return PTR_ERR(dp->grf);
>> + }
>> +
>> + dp->clk_dp = devm_clk_get(dev, "clk_dp");
> I've looked at the manual, but couldn't find an actual clock-name
> used there. Is it really "clk_dp" or should it just be "dp"?
This should be "clk_dp", not "dp".
Cause analogix_dp_core would need a clock name with "dp", so I would
rather to pasted my rockchip-dp node here before I add dt-bindings in
next version ;)
edp: edp@ff970000 {
compatible = "rockchip,rk3288-dp";
reg = <0xff970000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru
PCLK_EDP_CTRL>;
clock-names = "clk_dp", "clk_dp_24m", "dp";
rockchip,grf = <&grf>;
resets = <&cru 111>;
reset-names = "dp";
power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
hsync-active-high = <0>;
vsync-active-high = <0>;
interlaced = <0>;
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <1>;
ports {
edp_in: port {
#address-cells = <1>;
#size-cells = <0>;
edp_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_edp>;
};
};
};
>> +
>> + dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
> Same here, maybe "dp_24m".
Like my previous reply. And actually as those two clocks all have
a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
them to "sclk_dp" & "sclk_dp_24m", is it okay ?
>
>> + if (IS_ERR(dp->clk_24m)) {
>> + dev_err(dev, "cannot get clk_dp_24m\n");
>> + return PTR_ERR(dp->clk_24m);
>> + }
> I think you're missing the pclk here (PCLK_EDP_CTRL) or is this part of
> something else?
Whops, as I refered in commit message I leave pclk_dp to
analogix_dp_core driver ;-)
The reason why I want to leave pclk is I thought this clock is more like
analogix dp
core driver want, like a IP controller clock (whatever analogix_dp do
need a clock
named with "dp").
>
>> +
>> + dp->rst = devm_reset_control_get(dev, "dp");
>> + if (IS_ERR(dp->rst)) {
>> + dev_err(dev, "failed to get reset\n");
>> + return PTR_ERR(dp->rst);
>> + }
>> +
>> + ret = rockchip_dp_clk_enable(dp);
>> + if (ret < 0) {
>> + dev_err(dp->dev, "cannot enable dp clk %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = rockchip_dp_pre_init(dp);
>> + if (ret < 0) {
>> + dev_err(dp->dev, "failed to pre init %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
> [...]
>
>> +static int rockchip_dp_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *panel_node;
>> + struct rockchip_dp_device *dp;
>> + struct drm_panel *panel;
>> +
>> + panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
>> + if (!panel_node) {
>> + DRM_ERROR("failed to find rockchip,panel dt node\n");
>> + return -ENODEV;
>> + }
> Personally I would prefer to continue with the of-graph framework to
> attach the panel instead of defining a special node. But I'm not
> authorative on this. But that way the dts could then look like [0].
>
> I've sucessfully modified the driver currently in use in Chromeos for my
> dev-tree and have ported this change over onto your driver [1].
Wow! looks very nice, and really appricate for your ported code ;)
BTW should I rebase on your patch, or can just take your code in my next
version :-)
Thanks a lot,
- Yakir
>
> [0] https://github.com/mmind/linux-rockchip/blob/devel/somewhat-stable/arch/arm/boot/dts/rk3288-veyron-edp.dtsi#L76
> [1]
> ---------- 8< -------------
> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> index e7cf9ab..24e872d 100644
> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> @@ -20,6 +20,7 @@
> #include <linux/component.h>
> #include <linux/clk.h>
> #include <linux/mfd/syscon.h>
> +#include <linux/of_graph.h>
> #include <linux/regmap.h>
> #include <linux/reset.h>
>
> @@ -335,14 +336,28 @@ static const struct component_ops rockchip_dp_component_ops = {
> static int rockchip_dp_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> - struct device_node *panel_node;
> + struct device_node *panel_node, *port, *endpoint;
> struct rockchip_dp_device *dp;
> struct drm_panel *panel;
>
> - panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
> + port = of_graph_get_port_by_id(dev->of_node, 1);
> + if (!port) {
> + dev_err(dev, "can't find output port\n");
> + return -EINVAL;
> + }
> +
> + endpoint = of_get_child_by_name(port, "endpoint");
> + of_node_put(port);
> + if (!endpoint) {
> + dev_err(dev, "no output endpoint found\n");
> + return -EINVAL;
> + }
> +
> + panel_node = of_graph_get_remote_port_parent(endpoint);
> + of_node_put(endpoint);
> if (!panel_node) {
> - DRM_ERROR("failed to find rockchip,panel dt node\n");
> - return -ENODEV;
> + dev_err(&pdev->dev, "no output node found\n");
> + return -EINVAL;
> }
>
> panel = of_drm_find_panel(panel_node);
> ---------- 8< -------------
>
>
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-08 3:54 ` Yakir Yang
@ 2015-08-10 10:00 ` Thierry Reding
2015-08-10 12:59 ` Yakir Yang
2015-08-10 12:08 ` Heiko Stübner
1 sibling, 1 reply; 17+ messages in thread
From: Thierry Reding @ 2015-08-10 10:00 UTC (permalink / raw)
To: Yakir Yang
Cc: Heiko Stübner, Russell King, Fabio Estevam, Jingoo Han,
Inki Dae, djkurtz, dianders, seanpaul, joe, Takashi Iwai,
Andrzej Hajda, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-ker, nel
[-- Attachment #1: Type: text/plain, Size: 1489 bytes --]
On Sat, Aug 08, 2015 at 11:54:38AM +0800, Yakir Yang wrote:
[...]
> edp: edp@ff970000 {
[...]
> hsync-active-high = <0>;
> vsync-active-high = <0>;
> interlaced = <0>;
These look like they should come from the display mode definition (EDID)
rather than device tree.
> samsung,color-space = <0>;
> samsung,dynamic-range = <0>;
> samsung,ycbcr-coeff = <0>;
I think these should also come from EDID, though I'm not sure if we
store this in internal data structures yet.
> samsung,color-depth = <1>;
This is probably drm_display_info.bpc.
> samsung,link-rate = <0x0a>;
> samsung,lane-count = <1>;
And these should really be derived from values in the DPCD and adjusted
(if necessary) during link training.
Why would you ever want to hard-code the above?
> >>+ dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
> >Same here, maybe "dp_24m".
> Like my previous reply. And actually as those two clocks all have
> a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
> them to "sclk_dp" & "sclk_dp_24m", is it okay ?
I don't think there's a need for these common prefixes. The names here
are identifiers in the context of the IP block, so any SoC-specific
prefixes are irrelevant. Also they do appear, in DT and in code, in the
context of clocks already, so "sclk_" or "clk_" is completely redundant
in these names.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-08 3:54 ` Yakir Yang
2015-08-10 10:00 ` Thierry Reding
@ 2015-08-10 12:08 ` Heiko Stübner
2015-08-10 13:15 ` Yakir Yang
1 sibling, 1 reply; 17+ messages in thread
From: Heiko Stübner @ 2015-08-10 12:08 UTC (permalink / raw)
To: Yakir Yang
Cc: Russell King, Fabio Estevam, Jingoo Han, Inki Dae, djkurtz,
dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-ker, nel
Hi Yakir,
Am Samstag, 8. August 2015, 11:54:38 schrieb Yakir Yang:
> >> +static int rockchip_dp_init(struct rockchip_dp_device *dp)
> >> +{
> >> + struct device *dev = dp->dev;
> >> + struct device_node *np = dev->of_node;
> >> + int ret;
> >> +
> >> + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> >> + if (IS_ERR(dp->grf)) {
> >> + dev_err(dev,
> >> + "rk3288-dp needs rockchip,grf property\n");
> >> + return PTR_ERR(dp->grf);
> >> + }
> >> +
> >> + dp->clk_dp = devm_clk_get(dev, "clk_dp");
> >
> > I've looked at the manual, but couldn't find an actual clock-name
> > used there. Is it really "clk_dp" or should it just be "dp"?
>
> This should be "clk_dp", not "dp".
> Cause analogix_dp_core would need a clock name with "dp", so I would
> rather to pasted my rockchip-dp node here before I add dt-bindings in
> next version ;)
The clock we name PCLK_EDP_CTRL in the clock controller is probably the clock
supplying the APB interface and named pclk already in the "Figure 3-2
DP_TXclock domain" diagram on page 19 of the manual. So your "clk_dp" should
actually be "pclk".
So you would have "dp", "dp_24m" and "pclk" for the 3 supplying clocks.
>
> edp: edp@ff970000 {
> compatible = "rockchip,rk3288-dp";
> reg = <0xff970000 0x4000>;
> interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>
> clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru
> PCLK_EDP_CTRL>;
> clock-names = "clk_dp", "clk_dp_24m", "dp";
>
> rockchip,grf = <&grf>;
> resets = <&cru 111>;
> reset-names = "dp";
> power-domains = <&power RK3288_PD_VIO>;
> status = "disabled";
>
> hsync-active-high = <0>;
> vsync-active-high = <0>;
> interlaced = <0>;
> samsung,color-space = <0>;
> samsung,dynamic-range = <0>;
> samsung,ycbcr-coeff = <0>;
> samsung,color-depth = <1>;
> samsung,link-rate = <0x0a>;
> samsung,lane-count = <1>;
Thierry already said, that these should probably be somehow auto-detected.
Properties needing to stay around should probably also be "analogix,..." with
a fallback to not break Samsung devicetrees, so
look for "analogix,foo!, if not found try "samsung,foo"
> ports {
> edp_in: port {
> #address-cells = <1>;
> #size-cells = <0>;
> edp_in_vopb: endpoint@0 {
> reg = <0>;
> remote-endpoint = <&vopb_out_edp>;
> };
> };
> };
> >> +
> >> + dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
> >
> > Same here, maybe "dp_24m".
>
> Like my previous reply. And actually as those two clocks all have
> a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
> them to "sclk_dp" & "sclk_dp_24m", is it okay ?
As Thierry said, please don't add prefixes.
>
> >> + if (IS_ERR(dp->clk_24m)) {
> >> + dev_err(dev, "cannot get clk_dp_24m\n");
> >> + return PTR_ERR(dp->clk_24m);
> >> + }
> >
> > I think you're missing the pclk here (PCLK_EDP_CTRL) or is this part of
> > something else?
>
> Whops, as I refered in commit message I leave pclk_dp to
> analogix_dp_core driver ;-)
>
> The reason why I want to leave pclk is I thought this clock is more like
> analogix dp
> core driver want, like a IP controller clock (whatever analogix_dp do
> need a clock
> named with "dp").
Hmm, I'd think what the core (and Samsung) driver use as "dp" clock is
probably the generic clock for the IP and not the pclk for the APB interface.
So I think it still should be "dp" for the core and "dp_24m" + "pclk" for the
rockchip part?
>
> >> +
> >> + dp->rst = devm_reset_control_get(dev, "dp");
> >> + if (IS_ERR(dp->rst)) {
> >> + dev_err(dev, "failed to get reset\n");
> >> + return PTR_ERR(dp->rst);
> >> + }
> >> +
> >> + ret = rockchip_dp_clk_enable(dp);
> >> + if (ret < 0) {
> >> + dev_err(dp->dev, "cannot enable dp clk %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + ret = rockchip_dp_pre_init(dp);
> >> + if (ret < 0) {
> >> + dev_err(dp->dev, "failed to pre init %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >
> > [...]
> >
> >> +static int rockchip_dp_probe(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev;
> >> + struct device_node *panel_node;
> >> + struct rockchip_dp_device *dp;
> >> + struct drm_panel *panel;
> >> +
> >> + panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
> >> + if (!panel_node) {
> >> + DRM_ERROR("failed to find rockchip,panel dt node\n");
> >> + return -ENODEV;
> >> + }
> >
> > Personally I would prefer to continue with the of-graph framework to
> > attach the panel instead of defining a special node. But I'm not
> > authorative on this. But that way the dts could then look like [0].
> >
> > I've sucessfully modified the driver currently in use in Chromeos for my
> > dev-tree and have ported this change over onto your driver [1].
>
> Wow! looks very nice, and really appricate for your ported code ;)
>
> BTW should I rebase on your patch, or can just take your code in my next
> version :-)
The code I currently carry, is from the ChromeOS tree, so of course nothing in
mainline should be based on it. You could simply include the change into your
driver.
Heiko
>
>
> Thanks a lot,
> - Yakir
>
> > [0]
> > https://github.com/mmind/linux-rockchip/blob/devel/somewhat-stable/arch/a
> > rm/boot/dts/rk3288-veyron-edp.dtsi#L76 [1]
> > ---------- 8< -------------
> > diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> > b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index e7cf9ab..24e872d
> > 100644
> > --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> > +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> > @@ -20,6 +20,7 @@
> >
> > #include <linux/component.h>
> > #include <linux/clk.h>
> > #include <linux/mfd/syscon.h>
> >
> > +#include <linux/of_graph.h>
> >
> > #include <linux/regmap.h>
> > #include <linux/reset.h>
> >
> > @@ -335,14 +336,28 @@ static const struct component_ops
> > rockchip_dp_component_ops = {>
> > static int rockchip_dp_probe(struct platform_device *pdev)
> > {
> >
> > struct device *dev = &pdev->dev;
> >
> > - struct device_node *panel_node;
> > + struct device_node *panel_node, *port, *endpoint;
> >
> > struct rockchip_dp_device *dp;
> > struct drm_panel *panel;
> >
> > - panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
> > + port = of_graph_get_port_by_id(dev->of_node, 1);
> > + if (!port) {
> > + dev_err(dev, "can't find output port\n");
> > + return -EINVAL;
> > + }
> > +
> > + endpoint = of_get_child_by_name(port, "endpoint");
> > + of_node_put(port);
> > + if (!endpoint) {
> > + dev_err(dev, "no output endpoint found\n");
> > + return -EINVAL;
> > + }
> > +
> > + panel_node = of_graph_get_remote_port_parent(endpoint);
> > + of_node_put(endpoint);
> >
> > if (!panel_node) {
> >
> > - DRM_ERROR("failed to find rockchip,panel dt node\n");
> > - return -ENODEV;
> > + dev_err(&pdev->dev, "no output node found\n");
> > + return -EINVAL;
> >
> > }
> >
> > panel = of_drm_find_panel(panel_node);
> >
> > ---------- 8< -------------
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-10 10:00 ` Thierry Reding
@ 2015-08-10 12:59 ` Yakir Yang
2015-08-10 13:17 ` Thierry Reding
0 siblings, 1 reply; 17+ messages in thread
From: Yakir Yang @ 2015-08-10 12:59 UTC (permalink / raw)
To: Thierry Reding
Cc: Heiko Stübner, Russell King, Fabio Estevam, Jingoo Han,
Inki Dae, djkurtz, dianders, seanpaul, joe, Takashi Iwai,
Andrzej Hajda, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-ker, nel
Hi Thierry,
在 2015/8/10 18:00, Thierry Reding 写道:
> On Sat, Aug 08, 2015 at 11:54:38AM +0800, Yakir Yang wrote:
> [...]
>> edp: edp@ff970000 {
> [...]
>> hsync-active-high = <0>;
>> vsync-active-high = <0>;
>> interlaced = <0>;
> These look like they should come from the display mode definition (EDID)
> rather than device tree.
I do think so, those numbers can parse from struct drm_mode. But I haven't
send those changes yet, cause I want to merge the split analogix_dp
first, and
then send some patches to improve it. If you think it's better to
imptoved those
now, I would like to do it , please let me know ;)
>> samsung,color-space = <0>;
>> samsung,dynamic-range = <0>;
>> samsung,ycbcr-coeff = <0>;
> I think these should also come from EDID, though I'm not sure if we
> store this in internal data structures yet.
Same to previous reply
>> samsung,color-depth = <1>;
> This is probably drm_display_info.bpc.
Same to previous reply
>> samsung,link-rate = <0x0a>;
>> samsung,lane-count = <1>;
> And these should really be derived from values in the DPCD and adjusted
> (if necessary) during link training.
>
> Why would you ever want to hard-code the above?
Yes, I do meet the problem that my eDP screen need lane-count to 4, but my
DP TV need lane-count to 1. Just like previous reply, if you think I
should improved
them in this series, I would rather to do it.
>>>> + dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
>>> Same here, maybe "dp_24m".
>> Like my previous reply. And actually as those two clocks all have
>> a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
>> them to "sclk_dp" & "sclk_dp_24m", is it okay ?
> I don't think there's a need for these common prefixes. The names here
> are identifiers in the context of the IP block, so any SoC-specific
> prefixes are irrelevant. Also they do appear, in DT and in code, in the
> context of clocks already, so "sclk_" or "clk_" is completely redundant
> in these names.
The sclk_dp & sclk_dp_24m is not IP common ask, it's only exist in
RK3288 SoC (Like exynos
only got one "dp" clock), and actually I add this to rockchip platform
dp driver not analogix
dp driver. So I think it's okay to add some platform some common prefixes.
And I got a better idea for those clock. "sclk_dp" & "sclk_dp_24m" is
provided for the eDP phy,
and I just take Heiko suggest that add an new phy-rockchip-dp.c driver,
so it's better to move
those clock to phy driver, and rename them to "dp-phy" && "dp-phy-24m".
Thanks,
- Yakir
> Thierry
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-10 12:08 ` Heiko Stübner
@ 2015-08-10 13:15 ` Yakir Yang
0 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-10 13:15 UTC (permalink / raw)
To: Heiko Stübner
Cc: Russell King, Fabio Estevam, Jingoo Han, Inki Dae, djkurtz,
dianders, seanpaul, joe, Takashi Iwai, Andrzej Hajda,
Thierry Reding, Philipp Zabel, David Airlie, Gustavo Padovan,
Seung-Woo Kim, Kyungmin Park, Krzysztof Kozlowski, Kukjin Kim,
Ajay Kumar, Joonyoung Shim, Vincent Palatin, Mark Yao, Andy Yan,
ajaynumb, dri-devel, linux-kernel, linux-samsung-soc,
linux-rockchip, linux-arm-ker, nel
Hi Heiko,
在 2015/8/10 20:08, Heiko Stübner 写道:
> Hi Yakir,
>
> Am Samstag, 8. August 2015, 11:54:38 schrieb Yakir Yang:
>>>> +static int rockchip_dp_init(struct rockchip_dp_device *dp)
>>>> +{
>>>> + struct device *dev = dp->dev;
>>>> + struct device_node *np = dev->of_node;
>>>> + int ret;
>>>> +
>>>> + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
>>>> + if (IS_ERR(dp->grf)) {
>>>> + dev_err(dev,
>>>> + "rk3288-dp needs rockchip,grf property\n");
>>>> + return PTR_ERR(dp->grf);
>>>> + }
>>>> +
>>>> + dp->clk_dp = devm_clk_get(dev, "clk_dp");
>>> I've looked at the manual, but couldn't find an actual clock-name
>>> used there. Is it really "clk_dp" or should it just be "dp"?
>> This should be "clk_dp", not "dp".
>> Cause analogix_dp_core would need a clock name with "dp", so I would
>> rather to pasted my rockchip-dp node here before I add dt-bindings in
>> next version ;)
> The clock we name PCLK_EDP_CTRL in the clock controller is probably the clock
> supplying the APB interface and named pclk already in the "Figure 3-2
> DP_TXclock domain" diagram on page 19 of the manual. So your "clk_dp" should
> actually be "pclk".
>
> So you would have "dp", "dp_24m" and "pclk" for the 3 supplying clocks.
Oh, yes, "pclk" is for APB interface, and "sclk_edp" for IP controller,
and "sclk_edp_24m" for DP PHY,
thanks for your explain.
So for now, I would pass "sclk_edp" to "edp" in analogix_dp, and
"sclk_edp_24m" to "dp-phy_24m"
in phy-rockchip-dp.c, and "pclk_edp" to "pclk" in analogix_dp-rockchip.c.
>
>> edp: edp@ff970000 {
>> compatible = "rockchip,rk3288-dp";
>> reg = <0xff970000 0x4000>;
>> interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>>
>> clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru
>> PCLK_EDP_CTRL>;
>> clock-names = "clk_dp", "clk_dp_24m", "dp";
>>
>> rockchip,grf = <&grf>;
>> resets = <&cru 111>;
>> reset-names = "dp";
>> power-domains = <&power RK3288_PD_VIO>;
>> status = "disabled";
>>
>> hsync-active-high = <0>;
>> vsync-active-high = <0>;
>> interlaced = <0>;
>> samsung,color-space = <0>;
>> samsung,dynamic-range = <0>;
>> samsung,ycbcr-coeff = <0>;
>> samsung,color-depth = <1>;
>> samsung,link-rate = <0x0a>;
>> samsung,lane-count = <1>;
> Thierry already said, that these should probably be somehow auto-detected.
> Properties needing to stay around should probably also be "analogix,..." with
> a fallback to not break Samsung devicetrees, so
> look for "analogix,foo!, if not found try "samsung,foo"
Okay, it's better to rename to "analogxi...", done.
>
>> ports {
>> edp_in: port {
>> #address-cells = <1>;
>> #size-cells = <0>;
>> edp_in_vopb: endpoint@0 {
>> reg = <0>;
>> remote-endpoint = <&vopb_out_edp>;
>> };
>> };
>> };
>
>
>>>> +
>>>> + dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
>>> Same here, maybe "dp_24m".
>> Like my previous reply. And actually as those two clocks all have
>> a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
>> them to "sclk_dp" & "sclk_dp_24m", is it okay ?
> As Thierry said, please don't add prefixes.
Okay, so is it okay to rename them to "dp", "dp-phy-24m", "pclk" ?
>
>>>> + if (IS_ERR(dp->clk_24m)) {
>>>> + dev_err(dev, "cannot get clk_dp_24m\n");
>>>> + return PTR_ERR(dp->clk_24m);
>>>> + }
>>> I think you're missing the pclk here (PCLK_EDP_CTRL) or is this part of
>>> something else?
>> Whops, as I refered in commit message I leave pclk_dp to
>> analogix_dp_core driver ;-)
>>
>> The reason why I want to leave pclk is I thought this clock is more like
>> analogix dp
>> core driver want, like a IP controller clock (whatever analogix_dp do
>> need a clock
>> named with "dp").
> Hmm, I'd think what the core (and Samsung) driver use as "dp" clock is
> probably the generic clock for the IP and not the pclk for the APB interface.
>
> So I think it still should be "dp" for the core and "dp_24m" + "pclk" for the
> rockchip part?
Yes, I think you are right, thanks ;)
>
>>>> +
>>>> + dp->rst = devm_reset_control_get(dev, "dp");
>>>> + if (IS_ERR(dp->rst)) {
>>>> + dev_err(dev, "failed to get reset\n");
>>>> + return PTR_ERR(dp->rst);
>>>> + }
>>>> +
>>>> + ret = rockchip_dp_clk_enable(dp);
>>>> + if (ret < 0) {
>>>> + dev_err(dp->dev, "cannot enable dp clk %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + ret = rockchip_dp_pre_init(dp);
>>>> + if (ret < 0) {
>>>> + dev_err(dp->dev, "failed to pre init %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>> [...]
>>>
>>>> +static int rockchip_dp_probe(struct platform_device *pdev)
>>>> +{
>>>> + struct device *dev = &pdev->dev;
>>>> + struct device_node *panel_node;
>>>> + struct rockchip_dp_device *dp;
>>>> + struct drm_panel *panel;
>>>> +
>>>> + panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
>>>> + if (!panel_node) {
>>>> + DRM_ERROR("failed to find rockchip,panel dt node\n");
>>>> + return -ENODEV;
>>>> + }
>>> Personally I would prefer to continue with the of-graph framework to
>>> attach the panel instead of defining a special node. But I'm not
>>> authorative on this. But that way the dts could then look like [0].
>>>
>>> I've sucessfully modified the driver currently in use in Chromeos for my
>>> dev-tree and have ported this change over onto your driver [1].
>> Wow! looks very nice, and really appricate for your ported code ;)
>>
>> BTW should I rebase on your patch, or can just take your code in my next
>> version :-)
> The code I currently carry, is from the ChromeOS tree, so of course nothing in
> mainline should be based on it. You could simply include the change into your
> driver.
Okay,
Thanks,
- Yakir
>
> Heiko
>
>>
>> Thanks a lot,
>> - Yakir
>>
>>> [0]
>>> https://github.com/mmind/linux-rockchip/blob/devel/somewhat-stable/arch/a
>>> rm/boot/dts/rk3288-veyron-edp.dtsi#L76 [1]
>>> ---------- 8< -------------
>>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index e7cf9ab..24e872d
>>> 100644
>>> --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>> @@ -20,6 +20,7 @@
>>>
>>> #include <linux/component.h>
>>> #include <linux/clk.h>
>>> #include <linux/mfd/syscon.h>
>>>
>>> +#include <linux/of_graph.h>
>>>
>>> #include <linux/regmap.h>
>>> #include <linux/reset.h>
>>>
>>> @@ -335,14 +336,28 @@ static const struct component_ops
>>> rockchip_dp_component_ops = {>
>>> static int rockchip_dp_probe(struct platform_device *pdev)
>>> {
>>>
>>> struct device *dev = &pdev->dev;
>>>
>>> - struct device_node *panel_node;
>>> + struct device_node *panel_node, *port, *endpoint;
>>>
>>> struct rockchip_dp_device *dp;
>>> struct drm_panel *panel;
>>>
>>> - panel_node = of_parse_phandle(dev->of_node, "rockchip,panel", 0);
>>> + port = of_graph_get_port_by_id(dev->of_node, 1);
>>> + if (!port) {
>>> + dev_err(dev, "can't find output port\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + endpoint = of_get_child_by_name(port, "endpoint");
>>> + of_node_put(port);
>>> + if (!endpoint) {
>>> + dev_err(dev, "no output endpoint found\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + panel_node = of_graph_get_remote_port_parent(endpoint);
>>> + of_node_put(endpoint);
>>>
>>> if (!panel_node) {
>>>
>>> - DRM_ERROR("failed to find rockchip,panel dt node\n");
>>> - return -ENODEV;
>>> + dev_err(&pdev->dev, "no output node found\n");
>>> + return -EINVAL;
>>>
>>> }
>>>
>>> panel = of_drm_find_panel(panel_node);
>>>
>>> ---------- 8< -------------
>
>
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-10 12:59 ` Yakir Yang
@ 2015-08-10 13:17 ` Thierry Reding
2015-08-10 16:23 ` Yakir Yang
0 siblings, 1 reply; 17+ messages in thread
From: Thierry Reding @ 2015-08-10 13:17 UTC (permalink / raw)
To: Yakir Yang
Cc: Thierry Reding, Heiko Stübner, Russell King, Fabio Estevam,
Jingoo Han, Inki Dae, djkurtz, dianders, seanpaul, joe,
Takashi Iwai, Andrzej Hajda, Philipp Zabel, David Airlie,
Gustavo Padovan, Seung-Woo Kim, Kyungmin Park,
Krzysztof Kozlowski, Kukjin Kim, Ajay Kumar, Joonyoung Shim,
Vincent Palatin, Mark Yao, Andy Yan, ajaynumb, dri-devel,
linux-kernel, linux-samsung-soc, linux-rockchip, linux-arm-ker,
nel
[-- Attachment #1: Type: text/plain, Size: 4013 bytes --]
On Mon, Aug 10, 2015 at 08:59:44PM +0800, Yakir Yang wrote:
> Hi Thierry,
>
> 在 2015/8/10 18:00, Thierry Reding 写道:
> >On Sat, Aug 08, 2015 at 11:54:38AM +0800, Yakir Yang wrote:
> >[...]
> >> edp: edp@ff970000 {
> >[...]
> >> hsync-active-high = <0>;
> >> vsync-active-high = <0>;
> >> interlaced = <0>;
> >These look like they should come from the display mode definition (EDID)
> >rather than device tree.
>
> I do think so, those numbers can parse from struct drm_mode. But I haven't
> send those changes yet, cause I want to merge the split analogix_dp first,
> and
> then send some patches to improve it. If you think it's better to imptoved
> those
> now, I would like to do it , please let me know ;)
>
> >> samsung,color-space = <0>;
> >> samsung,dynamic-range = <0>;
> >> samsung,ycbcr-coeff = <0>;
> >I think these should also come from EDID, though I'm not sure if we
> >store this in internal data structures yet.
>
> Same to previous reply
>
> >> samsung,color-depth = <1>;
> >This is probably drm_display_info.bpc.
>
> Same to previous reply
>
> >> samsung,link-rate = <0x0a>;
> >> samsung,lane-count = <1>;
> >And these should really be derived from values in the DPCD and adjusted
> >(if necessary) during link training.
> >
> >Why would you ever want to hard-code the above?
>
> Yes, I do meet the problem that my eDP screen need lane-count to 4, but my
> DP TV need lane-count to 1. Just like previous reply, if you think I should
> improved
> them in this series, I would rather to do it.
The problem with these is that if you keep them in for your initial
submission, you can never (or only under extreme pain) remove them.
Anything in DTB needs to be effectively supported forever.
Also since these don't make sense to hard-code, just improve the code
and get rid of the need for these DT properties. Mind you that you still
need to keep the code to parse them, because presumably Exynos relies on
them. But depending on how you split up the driver you might be able to
restrict these compatibility hacks to Exynos and not carry them forward
into your new driver.
> >>>>+ dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
> >>>Same here, maybe "dp_24m".
> >>Like my previous reply. And actually as those two clocks all have
> >>a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
> >>them to "sclk_dp" & "sclk_dp_24m", is it okay ?
> >I don't think there's a need for these common prefixes. The names here
> >are identifiers in the context of the IP block, so any SoC-specific
> >prefixes are irrelevant. Also they do appear, in DT and in code, in the
> >context of clocks already, so "sclk_" or "clk_" is completely redundant
> >in these names.
>
> The sclk_dp & sclk_dp_24m is not IP common ask, it's only exist in RK3288
> SoC (Like exynos
> only got one "dp" clock), and actually I add this to rockchip platform dp
> driver not analogix
> dp driver. So I think it's okay to add some platform some common prefixes.
>
> And I got a better idea for those clock. "sclk_dp" & "sclk_dp_24m" is
> provided for the eDP phy,
> and I just take Heiko suggest that add an new phy-rockchip-dp.c driver, so
> it's better to move
> those clock to phy driver, and rename them to "dp-phy" && "dp-phy-24m".
I agree that dealing with these in a PHY driver sounds like the better
option. However, I still think that the dp-phy prefix is redundant. The
names are in a per-driver scope, so "dp-phy" is implied by the device
tree binding and driver already. You could simply use shorter names such
as "phy" and "24m" for example.
Also note that the clock provider will already have the proper names for
these, so the clock tree will end up showing the provider names. The
names in the binding are merely the "consumer" names.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver
2015-08-10 13:17 ` Thierry Reding
@ 2015-08-10 16:23 ` Yakir Yang
0 siblings, 0 replies; 17+ messages in thread
From: Yakir Yang @ 2015-08-10 16:23 UTC (permalink / raw)
To: Thierry Reding
Cc: Thierry Reding, Heiko Stübner, Russell King, Fabio Estevam,
Jingoo Han, Inki Dae, djkurtz, dianders, seanpaul, joe,
Takashi Iwai, Andrzej Hajda, Philipp Zabel, David Airlie,
Gustavo Padovan, Seung-Woo Kim, Kyungmin Park,
Krzysztof Kozlowski, Kukjin Kim, Ajay Kumar, Joonyoung Shim,
Vincent Palatin, Mark Yao, Andy Yan, ajaynumb, dri-devel,
linux-kernel, linux-samsung-soc, linux-rockchip, linux-arm-ker,
nel
Hi Thierry,
在 2015/8/10 21:17, Thierry Reding 写道:
> On Mon, Aug 10, 2015 at 08:59:44PM +0800, Yakir Yang wrote:
>> Hi Thierry,
>>
>> 在 2015/8/10 18:00, Thierry Reding 写道:
>>> On Sat, Aug 08, 2015 at 11:54:38AM +0800, Yakir Yang wrote:
>>> [...]
>>>> edp: edp@ff970000 {
>>> [...]
>>>> hsync-active-high = <0>;
>>>> vsync-active-high = <0>;
>>>> interlaced = <0>;
>>> These look like they should come from the display mode definition (EDID)
>>> rather than device tree.
>> I do think so, those numbers can parse from struct drm_mode. But I haven't
>> send those changes yet, cause I want to merge the split analogix_dp first,
>> and
>> then send some patches to improve it. If you think it's better to imptoved
>> those
>> now, I would like to do it , please let me know ;)
>>
>>>> samsung,color-space = <0>;
>>>> samsung,dynamic-range = <0>;
>>>> samsung,ycbcr-coeff = <0>;
>>> I think these should also come from EDID, though I'm not sure if we
>>> store this in internal data structures yet.
>> Same to previous reply
>>
>>>> samsung,color-depth = <1>;
>>> This is probably drm_display_info.bpc.
>> Same to previous reply
>>
>>>> samsung,link-rate = <0x0a>;
>>>> samsung,lane-count = <1>;
>>> And these should really be derived from values in the DPCD and adjusted
>>> (if necessary) during link training.
>>>
>>> Why would you ever want to hard-code the above?
>> Yes, I do meet the problem that my eDP screen need lane-count to 4, but my
>> DP TV need lane-count to 1. Just like previous reply, if you think I should
>> improved
>> them in this series, I would rather to do it.
> The problem with these is that if you keep them in for your initial
> submission, you can never (or only under extreme pain) remove them.
> Anything in DTB needs to be effectively supported forever.
>
> Also since these don't make sense to hard-code, just improve the code
> and get rid of the need for these DT properties. Mind you that you still
> need to keep the code to parse them, because presumably Exynos relies on
> them. But depending on how you split up the driver you might be able to
> restrict these compatibility hacks to Exynos and not carry them forward
> into your new driver.
Okay, thanks for your remind ;)
>>>>>> + dp->clk_24m = devm_clk_get(dev, "clk_dp_24m");
>>>>> Same here, maybe "dp_24m".
>>>> Like my previous reply. And actually as those two clocks all have
>>>> a common prefix "SCLK" in rk3288 clock tree, I thinkt we can name
>>>> them to "sclk_dp" & "sclk_dp_24m", is it okay ?
>>> I don't think there's a need for these common prefixes. The names here
>>> are identifiers in the context of the IP block, so any SoC-specific
>>> prefixes are irrelevant. Also they do appear, in DT and in code, in the
>>> context of clocks already, so "sclk_" or "clk_" is completely redundant
>>> in these names.
>> The sclk_dp & sclk_dp_24m is not IP common ask, it's only exist in RK3288
>> SoC (Like exynos
>> only got one "dp" clock), and actually I add this to rockchip platform dp
>> driver not analogix
>> dp driver. So I think it's okay to add some platform some common prefixes.
>>
>> And I got a better idea for those clock. "sclk_dp" & "sclk_dp_24m" is
>> provided for the eDP phy,
>> and I just take Heiko suggest that add an new phy-rockchip-dp.c driver, so
>> it's better to move
>> those clock to phy driver, and rename them to "dp-phy" && "dp-phy-24m".
> I agree that dealing with these in a PHY driver sounds like the better
> option. However, I still think that the dp-phy prefix is redundant. The
> names are in a per-driver scope, so "dp-phy" is implied by the device
> tree binding and driver already. You could simply use shorter names such
> as "phy" and "24m" for example.
>
> Also note that the clock provider will already have the proper names for
> these, so the clock tree will end up showing the provider names. The
> names in the binding are merely the "consumer" names.
Agree, thanks
- Yakir
> Thierry
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2015-08-10 16:24 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-07 10:34 [PATCH v2 0/8] Add Analogix Core Display Port Driver Yakir Yang
2015-08-07 10:37 ` [PATCH v2 1/8] drm: exynos/dp: fix code style Yakir Yang
2015-08-07 10:40 ` [PATCH v2 2/8] drm: exynos/dp: convert to drm bridge mode Yakir Yang
2015-08-07 10:43 ` [PATCH v2 3/8] drm: bridge: analogix_dp: split exynos dp driver to bridge dir Yakir Yang
2015-08-07 10:46 ` [PATCH v2 4/8] drm: rockchip/dp: add rockchip platform dp driver Yakir Yang
2015-08-07 22:46 ` Heiko Stübner
2015-08-08 3:54 ` Yakir Yang
2015-08-10 10:00 ` Thierry Reding
2015-08-10 12:59 ` Yakir Yang
2015-08-10 13:17 ` Thierry Reding
2015-08-10 16:23 ` Yakir Yang
2015-08-10 12:08 ` Heiko Stübner
2015-08-10 13:15 ` Yakir Yang
2015-08-07 10:46 ` [PATCH v2 5/8] drm: bridge/analogix_dp: add platform device type support Yakir Yang
2015-08-07 10:49 ` [PATCH v2 6/8] drm: bridge: analogix_dp: add some rk3288 special registers setting Yakir Yang
2015-08-07 10:51 ` [PATCH v2 7/8] drm: bridge: analogix_dp: try force hpd after plug in lookup failed Yakir Yang
2015-08-07 10:54 ` [PATCH v2 8/8] drm: bridge/analogix_dp: expand the delay time for hpd detect Yakir Yang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).