linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Xing Zheng <zhengxing@rock-chips.com>
To: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 2/9] clk: rockchip: add dt-binding header for rk3036
Date: Thu, 24 Sep 2015 10:17:56 +0800	[thread overview]
Message-ID: <56035D54.6010701@rock-chips.com> (raw)
In-Reply-To: <4652891.YJvoSYeOLF@diego>

On 2015年09月17日 17:25, Heiko Stübner wrote:
> Am Donnerstag, 17. September 2015, 16:28:53 schrieb Xing Zheng:
>> Add the dt-bindings header for the rk3036, that gets shared between
>> the clock controller and the clock references in the dts.
>>
>> Signed-off-by: Xing Zheng<zhengxing@rock-chips.com>
>> ---
>>
>> Changes in v2: None
>>
>>   include/dt-bindings/clock/rk3036-cru.h |  198
>> ++++++++++++++++++++++++++++++++ 1 file changed, 198 insertions(+)
>>   create mode 100644 include/dt-bindings/clock/rk3036-cru.h
>>
>> diff --git a/include/dt-bindings/clock/rk3036-cru.h
>> b/include/dt-bindings/clock/rk3036-cru.h new file mode 100644
>> index 0000000..b0033ef
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/rk3036-cru.h
>> @@ -0,0 +1,198 @@
>> +/*
>> + * Copyright (c) 2014 MundoReader S.L.
>> + * Author: Heiko Stuebner<heiko@sntech.de>
> you can probably drop that copyright line ... I didn't do anything here ;-)
OK, done. :)
>
>> + *
>> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
>> + * Author: Xing Zheng<zhengxing@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
>> +#define _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
>> +
>> +/* core clocks */
>> +#define PLL_APLL		1
>> +#define PLL_DPLL		2
>> +#define PLL_GPLL		3
>> +#define ARMCLK			4
>> +
>> +/* sclk gates (special clocks) */
> you have a lot of gaps in the numbering ... intentional?
Oh, I think I referenced to "rk3288-cru.h" and cut some useless 
numbering from it for rk3036
>
> otherwise
> Reviewed-by: Heiko Stuebner<heiko@sntech.de>
Done.
>> +#define SCLK_GPU		64
>> +#define SCLK_SPI		65
>> +#define SCLK_SDMMC		68
>> +#define SCLK_SDIO		69
>> +#define SCLK_EMMC		71
>> +#define SCLK_NANDC		76
>> +#define SCLK_UART0		77
>> +#define SCLK_UART1		78
>> +#define SCLK_UART2		79
>> +#define SCLK_I2S		82
>> +#define SCLK_SPDIF		83
>> +#define SCLK_TIMER0		85
>> +#define SCLK_TIMER1		86
>> +#define SCLK_TIMER2		87
>> +#define SCLK_TIMER3		88
>> +#define SCLK_OTGPHY0		93
>> +#define SCLK_OTGPHY1		94
>> +#define SCLK_LCDC		100
>> +#define SCLK_HDMI		109
>> +#define SCLK_HEVC		111
>> +#define SCLK_I2S_OUT		113
>> +#define SCLK_SDMMC_DRV		114
>> +#define SCLK_SDIO_DRV		115
>> +#define SCLK_EMMC_DRV		117
>> +#define SCLK_SDMMC_SAMPLE	118
>> +#define SCLK_SDIO_SAMPLE	119
>> +#define SCLK_EMMC_SAMPLE	121
>> +#define SCLK_PVTM_CORE          123
>> +#define SCLK_PVTM_GPU           124
>> +#define SCLK_PVTM_VIDEO         125
>> +#define SCLK_MAC		151
>> +#define SCLK_MACREF		152
>> +#define SCLK_SFC		160
>> +
>> +#define DCLK_LCDC		190
>> +
>> +/* aclk gates */
>> +#define ACLK_DMAC2		194
>> +#define ACLK_LCDC		197
>> +#define ACLK_VIO		203
>> +#define ACLK_VCODEC		208
>> +#define ACLK_CPU		209
>> +#define ACLK_PERI		210
>> +
>> +/* pclk gates */
>> +#define PCLK_GPIO0		320
>> +#define PCLK_GPIO1		321
>> +#define PCLK_GPIO2		322
>> +#define PCLK_GRF		329
>> +#define PCLK_I2C0		332
>> +#define PCLK_I2C1		333
>> +#define PCLK_I2C2		334
>> +#define PCLK_SPI		338
>> +#define PCLK_UART0		341
>> +#define PCLK_UART1		342
>> +#define PCLK_UART2		343
>> +#define PCLK_PWM		350
>> +#define PCLK_TIMER		353
>> +#define PCLK_HDMI		360
>> +#define PCLK_CPU		362
>> +#define PCLK_PERI		363
>> +#define PCLK_DDRUPCTL		364
>> +#define PCLK_WDT		368
>> +
>> +/* hclk gates */
>> +#define HCLK_OTG0		449
>> +#define HCLK_OTG1		450
>> +#define HCLK_NANDC		453
>> +#define HCLK_SDMMC		456
>> +#define HCLK_SDIO		457
>> +#define HCLK_EMMC		459
>> +#define HCLK_I2S		462
>> +#define HCLK_LCDC		465
>> +#define HCLK_ROM		467
>> +#define HCLK_VIO_BUS		472
>> +#define HCLK_VCODEC		476
>> +#define HCLK_CPU		477
>> +#define HCLK_PERI		478
>> +
>> +#define CLK_NR_CLKS		(HCLK_PERI + 1)
>> +
>> +/* soft-reset indices */
>> +#define SRST_CORE0		0
>> +#define SRST_CORE1		1
>> +#define SRST_CORE0_DBG		4
>> +#define SRST_CORE1_DBG		5
>> +#define SRST_CORE0_POR		8
>> +#define SRST_CORE1_POR		9
>> +#define SRST_L2C		12
>> +#define SRST_TOPDBG		13
>> +#define SRST_STRC_SYS_A		14
>> +#define SRST_PD_CORE_NIU	15
>> +
>> +#define SRST_TIMER2		16
>> +#define SRST_CPUSYS_H		17
>> +#define SRST_AHB2APB_H		19
>> +#define SRST_TIMER3		20
>> +#define SRST_INTMEM		21
>> +#define SRST_ROM		22
>> +#define SRST_PERI_NIU		23
>> +#define SRST_I2S		24
>> +#define SRST_DDR_PLL		25
>> +#define SRST_GPU_DLL		26
>> +#define SRST_TIMER0		27
>> +#define SRST_TIMER1		28
>> +#define SRST_CORE_DLL		29
>> +#define SRST_EFUSE_P		30
>> +#define SRST_ACODEC_P		31
>> +
>> +#define SRST_GPIO0		32
>> +#define SRST_GPIO1		33
>> +#define SRST_GPIO2		34
>> +#define SRST_UART0		39
>> +#define SRST_UART1		40
>> +#define SRST_UART2		41
>> +#define SRST_I2C0		43
>> +#define SRST_I2C1		44
>> +#define SRST_I2C2		45
>> +#define SRST_SFC		47
>> +
>> +#define SRST_PWM0		48
>> +#define SRST_DAP		51
>> +#define SRST_DAP_SYS		52
>> +#define SRST_GRF		55
>> +#define SRST_PERIPHSYS_A	57
>> +#define SRST_PERIPHSYS_H	58
>> +#define SRST_PERIPHSYS_P	59
>> +#define SRST_CPU_PERI		61
>> +#define SRST_EMEM_PERI		62
>> +#define SRST_USB_PERI		63
>> +
>> +#define SRST_DMA2		64
>> +#define SRST_MAC		66
>> +#define SRST_NANDC		68
>> +#define SRST_USBOTG0		69
>> +#define SRST_OTGC0		71
>> +#define SRST_USBOTG1		72
>> +#define SRST_OTGC1		74
>> +#define SRST_DDRMSCH		79
>> +
>> +#define SRST_MMC0		81
>> +#define SRST_SDIO		82
>> +#define SRST_EMMC		83
>> +#define SRST_SPI0		84
>> +#define SRST_WDT		86
>> +#define SRST_DDRPHY		88
>> +#define SRST_DDRPHY_P		89
>> +#define SRST_DDRCTRL		90
>> +#define SRST_DDRCTRL_P		91
>> +
>> +#define SRST_HDMI_P		96
>> +#define SRST_VIO_BUS_H		99
>> +#define SRST_UTMI0		103
>> +#define SRST_UTMI1		104
>> +#define SRST_USBPOR		105
>> +
>> +#define SRST_VCODEC_A		112
>> +#define SRST_VCODEC_H		113
>> +#define SRST_VIO1_A		114
>> +#define SRST_HEVC		115
>> +#define SRST_VCODEC_NIU_A	116
>> +#define SRST_LCDC1_A		117
>> +#define SRST_LCDC1_H		118
>> +#define SRST_LCDC1_D		119
>> +#define SRST_GPU		120
>> +#define SRST_GPU_NIU_A		122
>> +
>> +#define SRST_DBG_P		131
>> +
>> +#endif
>
>
>



  reply	other threads:[~2015-09-24  2:20 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-17  8:28 [PATCH v2 0/9] Build and support rk3036 SoC platform Xing Zheng
2015-09-17  8:28 ` [PATCH v2 1/9] ARM: dts: rockchip: add core rk3036 dts Xing Zheng
2015-09-17  9:18   ` Heiko Stübner
2015-09-24  2:18     ` Xing Zheng
2015-09-17  8:28 ` [PATCH v2 2/9] clk: rockchip: add dt-binding header for rk3036 Xing Zheng
2015-09-17  9:25   ` Heiko Stübner
2015-09-24  2:17     ` Xing Zheng [this message]
2015-09-17  8:28 ` [PATCH v2 3/9] clk: rockchip: add clock controller " Xing Zheng
2015-09-17  9:47   ` Heiko Stübner
2015-09-24  3:04     ` Xing Zheng
2015-09-24  3:31       ` Xing Zheng
2015-10-07 10:24         ` Heiko Stuebner
2015-09-17  8:28 ` [PATCH v2 4/9] clk: rockchip: add new clock type and " Xing Zheng
2015-09-17  9:54   ` Heiko Stübner
2015-09-22 22:41   ` Stephen Boyd
2015-09-22 22:58     ` Heiko Stübner
2015-09-22 23:19       ` Stephen Boyd
2015-09-30 23:32         ` Heiko Stübner
2015-10-01  0:51           ` Stephen Boyd
2015-09-17  9:59 ` [PATCH v2 0/9] Build and support rk3036 SoC platform Heiko Stübner
2015-09-17 10:32 ` [PATCH v2 5/9] dt-bindings: add documentation of rk3036 clock controller Xing Zheng
2015-09-17 15:09   ` Heiko Stübner
2015-09-24  3:42     ` Xing Zheng
2015-09-17 10:34 ` [PATCH v2 6/9] pinctrl: rockchip: add support for the rk3036 Xing Zheng
2015-09-17 12:47   ` Heiko Stübner
2015-09-17 10:37 ` [PATCH v2 7/9] rockchip: make sure timer5 is enabled on rk3036 platforms Xing Zheng
2015-09-17 15:05   ` Heiko Stübner
2015-09-28 12:25     ` Xing Zheng
2015-09-28 12:44       ` Heiko Stübner
2015-09-28 12:53         ` Xing Zheng
2015-09-17 10:38 ` [PATCH v2 8/9] ARM: rockchip: add support smp for rk3036 Xing Zheng
2015-09-17 20:15   ` Heiko Stübner
2015-09-28 11:50     ` Xing Zheng
2015-09-17 10:39 ` [PATCH v2 9/9] rtc: hym8563: make sure hym8563 can be normal work Xing Zheng
2015-09-17 12:07   ` Heiko Stübner
2015-09-17 12:31     ` Alexandre Belloni
2015-09-17 12:44       ` Xing Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56035D54.6010701@rock-chips.com \
    --to=zhengxing@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=heiko@sntech.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).