* [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support
@ 2015-09-21 17:17 Ray Jui
2015-09-21 17:17 ` [PATCH v5 1/2] dt-bindings: Add Cygnus PCIe PHY binding doc Ray Jui
` (2 more replies)
0 siblings, 3 replies; 12+ messages in thread
From: Ray Jui @ 2015-09-21 17:17 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list, Ray Jui
This patch series adds support for the Cygnus PCIe PHY
This patch series is based on Linux v4.3-rc1 and is avaliable in:
https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v5
Changes from v4:
- Add comment to explain the required 50 ms wait after PCIe AFE is brought
up
- Change some of 'dev_info' print to 'dev_dbg'
Changes from v3:
- Modify the driver to use child node to represent each PCIe PHY
- Update device tree binding document and examples accordingly
- Add owner filed in phy ops
Changes from v2:
- Dropped MDC/MDIO bus driver since it's not needed to enable/disable the
analog-front-end of the PCIe Serdes on Cygnus
- Optimized delay waiting for PCIe analog-front-end to be fully enabled
- Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required
Changes from v1:
- Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/*
- Make the PCIe PHY device node child node of the MDIO bus
- Change the PCIe PHY driver to tristate so it can be compiled as a module
- Other minor changes
Ray Jui (2):
dt-bindings: Add Cygnus PCIe PHY binding doc
phy: cygnus: pcie: Add Cygnus PCIe PHY support
.../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 +++++
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-bcm-cygnus-pcie.c | 213 +++++++++++++++++++++
4 files changed, 270 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c
--
1.9.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v5 1/2] dt-bindings: Add Cygnus PCIe PHY binding doc
2015-09-21 17:17 [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support Ray Jui
@ 2015-09-21 17:17 ` Ray Jui
2015-09-21 17:17 ` [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support Ray Jui
2015-09-28 16:03 ` [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support Ray Jui
2 siblings, 0 replies; 12+ messages in thread
From: Ray Jui @ 2015-09-21 17:17 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list, Ray Jui
Add DT binding document for Broadcom Cygnus PCIe PHYs
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
.../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 ++++++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
new file mode 100644
index 0000000..761c4bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
@@ -0,0 +1,47 @@
+Broadcom Cygnus PCIe PHY
+
+Required properties:
+- compatible: must be "brcm,cygnus-pcie-phy"
+- reg: base address and length of the PCIe PHY block
+- #address-cells: must be 1
+- #size-cells: must be 0
+
+Each PCIe PHY should be represented by a child node
+
+Required properties For the child node:
+- reg: the PHY ID
+0 - PCIe RC 0
+1 - PCIe RC 1
+- #phy-cells: must be 0
+
+Example:
+ pcie_phy: phy@0301d0a0 {
+ compatible = "brcm,cygnus-pcie-phy";
+ reg = <0x0301d0a0 0x14>;
+
+ pcie0_phy: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ pcie1_phy: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ /* users of the PCIe phy */
+
+ pcie0: pcie@18012000 {
+ ...
+ ...
+ phys = <&pcie0_phy>;
+ phy-names = "pcie-phy";
+ };
+
+ pcie1: pcie@18013000 {
+ ...
+ ...
+ phys = <pcie1_phy>;
+ phy-names = "pcie-phy";
+ };
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support
2015-09-21 17:17 [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support Ray Jui
2015-09-21 17:17 ` [PATCH v5 1/2] dt-bindings: Add Cygnus PCIe PHY binding doc Ray Jui
@ 2015-09-21 17:17 ` Ray Jui
2015-10-06 14:25 ` Kishon Vijay Abraham I
2015-09-28 16:03 ` [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support Ray Jui
2 siblings, 1 reply; 12+ messages in thread
From: Ray Jui @ 2015-09-21 17:17 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list, Ray Jui
This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
on Cygnus
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
drivers/phy/Kconfig | 9 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-bcm-cygnus-pcie.c | 213 ++++++++++++++++++++++++++++++++++++++
3 files changed, 223 insertions(+)
create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 47da573..947bae2 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -371,4 +371,13 @@ config PHY_BRCMSTB_SATA
Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
Likely useful only with CONFIG_SATA_BRCMSTB enabled.
+config PHY_CYGNUS_PCIE
+ tristate "Broadcom Cygnus PCIe PHY driver"
+ depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ select GENERIC_PHY
+ default ARCH_BCM_CYGNUS
+ help
+ Enable this to support the Broadcom Cygnus PCIe PHY.
+ If unsure, say N.
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index a5b18c1..fdce78d 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
+obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/phy-bcm-cygnus-pcie.c
new file mode 100644
index 0000000..7ad72b7
--- /dev/null
+++ b/drivers/phy/phy-bcm-cygnus-pcie.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PCIE_CFG_OFFSET 0x00
+#define PCIE1_PHY_IDDQ_SHIFT 10
+#define PCIE0_PHY_IDDQ_SHIFT 2
+
+enum cygnus_pcie_phy_id {
+ CYGNUS_PHY_PCIE0 = 0,
+ CYGNUS_PHY_PCIE1,
+ MAX_NUM_PHYS,
+};
+
+struct cygnus_pcie_phy_core;
+
+/**
+ * struct cygnus_pcie_phy - Cygnus PCIe PHY device
+ * @core: pointer to the Cygnus PCIe PHY core control
+ * @id: internal ID to identify the Cygnus PCIe PHY
+ * @phy: pointer to the kernel PHY device
+ */
+struct cygnus_pcie_phy {
+ struct cygnus_pcie_phy_core *core;
+ enum cygnus_pcie_phy_id id;
+ struct phy *phy;
+};
+
+/**
+ * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control
+ * @dev: pointer to device
+ * @base: base register
+ * @lock: mutex to protect access to individual PHYs
+ * @phys: pointer to Cygnus PHY device
+ */
+struct cygnus_pcie_phy_core {
+ struct device *dev;
+ void __iomem *base;
+ struct mutex lock;
+ struct cygnus_pcie_phy phys[MAX_NUM_PHYS];
+};
+
+static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool enable)
+{
+ struct cygnus_pcie_phy_core *core = phy->core;
+ unsigned shift;
+ u32 val;
+
+ mutex_lock(&core->lock);
+
+ switch (phy->id) {
+ case CYGNUS_PHY_PCIE0:
+ shift = PCIE0_PHY_IDDQ_SHIFT;
+ break;
+
+ case CYGNUS_PHY_PCIE1:
+ shift = PCIE1_PHY_IDDQ_SHIFT;
+ break;
+
+ default:
+ mutex_unlock(&core->lock);
+ dev_err(core->dev, "PCIe PHY %d invalid\n", phy->id);
+ return -EINVAL;
+ }
+
+ if (enable) {
+ val = readl(core->base + PCIE_CFG_OFFSET);
+ val &= ~BIT(shift);
+ writel(val, core->base + PCIE_CFG_OFFSET);
+ /*
+ * Wait 50 ms for the PCIe Serdes to stabilize after the analog
+ * front end is brought up
+ */
+ msleep(50);
+ } else {
+ val = readl(core->base + PCIE_CFG_OFFSET);
+ val |= BIT(shift);
+ writel(val, core->base + PCIE_CFG_OFFSET);
+ }
+
+ mutex_unlock(&core->lock);
+ dev_dbg(core->dev, "PCIe PHY %d %s\n", phy->id,
+ enable ? "enabled" : "disabled");
+ return 0;
+}
+
+static int cygnus_pcie_phy_power_on(struct phy *p)
+{
+ struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
+
+ return cygnus_pcie_power_config(phy, true);
+}
+
+static int cygnus_pcie_phy_power_off(struct phy *p)
+{
+ struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
+
+ return cygnus_pcie_power_config(phy, false);
+}
+
+static struct phy_ops cygnus_pcie_phy_ops = {
+ .power_on = cygnus_pcie_phy_power_on,
+ .power_off = cygnus_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int cygnus_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node, *child;
+ struct cygnus_pcie_phy_core *core;
+ struct phy_provider *provider;
+ struct resource *res;
+ unsigned cnt = 0;
+
+ if (of_get_child_count(node) == 0) {
+ dev_err(dev, "PHY no child node\n");
+ return -ENODEV;
+ }
+
+ core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+
+ core->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ core->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(core->base))
+ return PTR_ERR(core->base);
+
+ mutex_init(&core->lock);
+
+ for_each_available_child_of_node(node, child) {
+ unsigned int id;
+ struct cygnus_pcie_phy *p;
+
+ if (of_property_read_u32(child, "reg", &id)) {
+ dev_err(dev, "missing reg property for %s\n",
+ child->name);
+ return -EINVAL;
+ }
+
+ if (id >= MAX_NUM_PHYS) {
+ dev_err(dev, "invalid PHY id: %u\n", id);
+ return -EINVAL;
+ }
+
+ if (core->phys[id].phy) {
+ dev_err(dev, "duplicated PHY id: %u\n", id);
+ return -EINVAL;
+ }
+
+ p = &core->phys[id];
+ p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops);
+ if (IS_ERR(p->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(p->phy);
+ }
+
+ p->core = core;
+ p->id = id;
+ phy_set_drvdata(p->phy, p);
+ cnt++;
+ }
+
+ dev_set_drvdata(dev, core);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "failed to register PHY provider\n");
+ return PTR_ERR(provider);
+ }
+
+ dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt);
+
+ return 0;
+}
+
+static const struct of_device_id cygnus_pcie_phy_match_table[] = {
+ { .compatible = "brcm,cygnus-pcie-phy" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cygnus_pcie_phy_match_table);
+
+static struct platform_driver cygnus_pcie_phy_driver = {
+ .driver = {
+ .name = "cygnus-pcie-phy",
+ .of_match_table = cygnus_pcie_phy_match_table,
+ },
+ .probe = cygnus_pcie_phy_probe,
+};
+module_platform_driver(cygnus_pcie_phy_driver);
+
+MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Cygnus PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support
2015-09-21 17:17 [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support Ray Jui
2015-09-21 17:17 ` [PATCH v5 1/2] dt-bindings: Add Cygnus PCIe PHY binding doc Ray Jui
2015-09-21 17:17 ` [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support Ray Jui
@ 2015-09-28 16:03 ` Ray Jui
2015-09-29 13:24 ` Kishon Vijay Abraham I
2 siblings, 1 reply; 12+ messages in thread
From: Ray Jui @ 2015-09-28 16:03 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
Hi Kishon,
Is there any more change that you want me to make with this patch series?
Thanks,
Ray
On 9/21/2015 10:17 AM, Ray Jui wrote:
> This patch series adds support for the Cygnus PCIe PHY
>
> This patch series is based on Linux v4.3-rc1 and is avaliable in:
> https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v5
>
> Changes from v4:
> - Add comment to explain the required 50 ms wait after PCIe AFE is brought
> up
> - Change some of 'dev_info' print to 'dev_dbg'
>
> Changes from v3:
> - Modify the driver to use child node to represent each PCIe PHY
> - Update device tree binding document and examples accordingly
> - Add owner filed in phy ops
>
> Changes from v2:
> - Dropped MDC/MDIO bus driver since it's not needed to enable/disable the
> analog-front-end of the PCIe Serdes on Cygnus
> - Optimized delay waiting for PCIe analog-front-end to be fully enabled
> - Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required
>
> Changes from v1:
> - Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/*
> - Make the PCIe PHY device node child node of the MDIO bus
> - Change the PCIe PHY driver to tristate so it can be compiled as a module
> - Other minor changes
>
> Ray Jui (2):
> dt-bindings: Add Cygnus PCIe PHY binding doc
> phy: cygnus: pcie: Add Cygnus PCIe PHY support
>
> .../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 +++++
> drivers/phy/Kconfig | 9 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-bcm-cygnus-pcie.c | 213 +++++++++++++++++++++
> 4 files changed, 270 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
> create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support
2015-09-28 16:03 ` [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support Ray Jui
@ 2015-09-29 13:24 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 12+ messages in thread
From: Kishon Vijay Abraham I @ 2015-09-29 13:24 UTC (permalink / raw)
To: Ray Jui
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
Hi,
On Monday 28 September 2015 09:33 PM, Ray Jui wrote:
> Hi Kishon,
>
> Is there any more change that you want me to make with this patch series?
Nope. The patch looks good, I'll be merging it soonish.
Thanks
Kishon
>
> Thanks,
>
> Ray
>
> On 9/21/2015 10:17 AM, Ray Jui wrote:
>> This patch series adds support for the Cygnus PCIe PHY
>>
>> This patch series is based on Linux v4.3-rc1 and is avaliable in:
>> https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-v5
>>
>> Changes from v4:
>> - Add comment to explain the required 50 ms wait after PCIe AFE is brought
>> up
>> - Change some of 'dev_info' print to 'dev_dbg'
>>
>> Changes from v3:
>> - Modify the driver to use child node to represent each PCIe PHY
>> - Update device tree binding document and examples accordingly
>> - Add owner filed in phy ops
>>
>> Changes from v2:
>> - Dropped MDC/MDIO bus driver since it's not needed to enable/disable the
>> analog-front-end of the PCIe Serdes on Cygnus
>> - Optimized delay waiting for PCIe analog-front-end to be fully enabled
>> - Reduce the #phy-cell to 1 since now the MDIO PHY ID is not required
>>
>> Changes from v1:
>> - Move the MDC/MDIO bus driver from drivers/phy/* to drivers/bus/*
>> - Make the PCIe PHY device node child node of the MDIO bus
>> - Change the PCIe PHY driver to tristate so it can be compiled as a module
>> - Other minor changes
>>
>> Ray Jui (2):
>> dt-bindings: Add Cygnus PCIe PHY binding doc
>> phy: cygnus: pcie: Add Cygnus PCIe PHY support
>>
>> .../bindings/phy/brcm,cygnus-pcie-phy.txt | 47 +++++
>> drivers/phy/Kconfig | 9 +
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-bcm-cygnus-pcie.c | 213 +++++++++++++++++++++
>> 4 files changed, 270 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
>> create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c
>>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support
2015-09-21 17:17 ` [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support Ray Jui
@ 2015-10-06 14:25 ` Kishon Vijay Abraham I
2015-10-06 17:13 ` Ray Jui
0 siblings, 1 reply; 12+ messages in thread
From: Kishon Vijay Abraham I @ 2015-10-06 14:25 UTC (permalink / raw)
To: Ray Jui
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
Hi,
On Monday 21 September 2015 10:47 PM, Ray Jui wrote:
> This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
> on Cygnus
>
> Signed-off-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>
merged this driver to linux-phy tree. Can you send a separate patch
adding yourself as the maintainer of this driver?
Thanks
Kishon
> ---
> drivers/phy/Kconfig | 9 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-bcm-cygnus-pcie.c | 213 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 223 insertions(+)
> create mode 100644 drivers/phy/phy-bcm-cygnus-pcie.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 47da573..947bae2 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -371,4 +371,13 @@ config PHY_BRCMSTB_SATA
> Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
> Likely useful only with CONFIG_SATA_BRCMSTB enabled.
>
> +config PHY_CYGNUS_PCIE
> + tristate "Broadcom Cygnus PCIe PHY driver"
> + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
> + select GENERIC_PHY
> + default ARCH_BCM_CYGNUS
> + help
> + Enable this to support the Broadcom Cygnus PCIe PHY.
> + If unsure, say N.
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index a5b18c1..fdce78d 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
> obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
> obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
> obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
> diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/phy-bcm-cygnus-pcie.c
> new file mode 100644
> index 0000000..7ad72b7
> --- /dev/null
> +++ b/drivers/phy/phy-bcm-cygnus-pcie.c
> @@ -0,0 +1,213 @@
> +/*
> + * Copyright (C) 2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +
> +#define PCIE_CFG_OFFSET 0x00
> +#define PCIE1_PHY_IDDQ_SHIFT 10
> +#define PCIE0_PHY_IDDQ_SHIFT 2
> +
> +enum cygnus_pcie_phy_id {
> + CYGNUS_PHY_PCIE0 = 0,
> + CYGNUS_PHY_PCIE1,
> + MAX_NUM_PHYS,
> +};
> +
> +struct cygnus_pcie_phy_core;
> +
> +/**
> + * struct cygnus_pcie_phy - Cygnus PCIe PHY device
> + * @core: pointer to the Cygnus PCIe PHY core control
> + * @id: internal ID to identify the Cygnus PCIe PHY
> + * @phy: pointer to the kernel PHY device
> + */
> +struct cygnus_pcie_phy {
> + struct cygnus_pcie_phy_core *core;
> + enum cygnus_pcie_phy_id id;
> + struct phy *phy;
> +};
> +
> +/**
> + * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control
> + * @dev: pointer to device
> + * @base: base register
> + * @lock: mutex to protect access to individual PHYs
> + * @phys: pointer to Cygnus PHY device
> + */
> +struct cygnus_pcie_phy_core {
> + struct device *dev;
> + void __iomem *base;
> + struct mutex lock;
> + struct cygnus_pcie_phy phys[MAX_NUM_PHYS];
> +};
> +
> +static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool enable)
> +{
> + struct cygnus_pcie_phy_core *core = phy->core;
> + unsigned shift;
> + u32 val;
> +
> + mutex_lock(&core->lock);
> +
> + switch (phy->id) {
> + case CYGNUS_PHY_PCIE0:
> + shift = PCIE0_PHY_IDDQ_SHIFT;
> + break;
> +
> + case CYGNUS_PHY_PCIE1:
> + shift = PCIE1_PHY_IDDQ_SHIFT;
> + break;
> +
> + default:
> + mutex_unlock(&core->lock);
> + dev_err(core->dev, "PCIe PHY %d invalid\n", phy->id);
> + return -EINVAL;
> + }
> +
> + if (enable) {
> + val = readl(core->base + PCIE_CFG_OFFSET);
> + val &= ~BIT(shift);
> + writel(val, core->base + PCIE_CFG_OFFSET);
> + /*
> + * Wait 50 ms for the PCIe Serdes to stabilize after the analog
> + * front end is brought up
> + */
> + msleep(50);
> + } else {
> + val = readl(core->base + PCIE_CFG_OFFSET);
> + val |= BIT(shift);
> + writel(val, core->base + PCIE_CFG_OFFSET);
> + }
> +
> + mutex_unlock(&core->lock);
> + dev_dbg(core->dev, "PCIe PHY %d %s\n", phy->id,
> + enable ? "enabled" : "disabled");
> + return 0;
> +}
> +
> +static int cygnus_pcie_phy_power_on(struct phy *p)
> +{
> + struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
> +
> + return cygnus_pcie_power_config(phy, true);
> +}
> +
> +static int cygnus_pcie_phy_power_off(struct phy *p)
> +{
> + struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
> +
> + return cygnus_pcie_power_config(phy, false);
> +}
> +
> +static struct phy_ops cygnus_pcie_phy_ops = {
> + .power_on = cygnus_pcie_phy_power_on,
> + .power_off = cygnus_pcie_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int cygnus_pcie_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node, *child;
> + struct cygnus_pcie_phy_core *core;
> + struct phy_provider *provider;
> + struct resource *res;
> + unsigned cnt = 0;
> +
> + if (of_get_child_count(node) == 0) {
> + dev_err(dev, "PHY no child node\n");
> + return -ENODEV;
> + }
> +
> + core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
> + if (!core)
> + return -ENOMEM;
> +
> + core->dev = dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + core->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(core->base))
> + return PTR_ERR(core->base);
> +
> + mutex_init(&core->lock);
> +
> + for_each_available_child_of_node(node, child) {
> + unsigned int id;
> + struct cygnus_pcie_phy *p;
> +
> + if (of_property_read_u32(child, "reg", &id)) {
> + dev_err(dev, "missing reg property for %s\n",
> + child->name);
> + return -EINVAL;
> + }
> +
> + if (id >= MAX_NUM_PHYS) {
> + dev_err(dev, "invalid PHY id: %u\n", id);
> + return -EINVAL;
> + }
> +
> + if (core->phys[id].phy) {
> + dev_err(dev, "duplicated PHY id: %u\n", id);
> + return -EINVAL;
> + }
> +
> + p = &core->phys[id];
> + p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops);
> + if (IS_ERR(p->phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(p->phy);
> + }
> +
> + p->core = core;
> + p->id = id;
> + phy_set_drvdata(p->phy, p);
> + cnt++;
> + }
> +
> + dev_set_drvdata(dev, core);
> +
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(provider)) {
> + dev_err(dev, "failed to register PHY provider\n");
> + return PTR_ERR(provider);
> + }
> +
> + dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id cygnus_pcie_phy_match_table[] = {
> + { .compatible = "brcm,cygnus-pcie-phy" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, cygnus_pcie_phy_match_table);
> +
> +static struct platform_driver cygnus_pcie_phy_driver = {
> + .driver = {
> + .name = "cygnus-pcie-phy",
> + .of_match_table = cygnus_pcie_phy_match_table,
> + },
> + .probe = cygnus_pcie_phy_probe,
> +};
> +module_platform_driver(cygnus_pcie_phy_driver);
> +
> +MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
> +MODULE_DESCRIPTION("Broadcom Cygnus PCIe PHY driver");
> +MODULE_LICENSE("GPL v2");
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support
2015-10-06 14:25 ` Kishon Vijay Abraham I
@ 2015-10-06 17:13 ` Ray Jui
2015-10-06 19:20 ` Kishon Vijay Abraham I
0 siblings, 1 reply; 12+ messages in thread
From: Ray Jui @ 2015-10-06 17:13 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
Hi Kishon,
On 10/6/2015 7:25 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Monday 21 September 2015 10:47 PM, Ray Jui wrote:
>> This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
>> on Cygnus
>>
>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
>> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
>> Reviewed-by: Scott Branden <sbranden@broadcom.com>
>
>
> merged this driver to linux-phy tree. Can you send a separate patch
> adding yourself as the maintainer of this driver?
>
> Thanks
> Kishon
We have a pool of maintainers to maintain all iProc based device drivers
(including this PCIe PHY driver for Cygnus):
BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
M: Jon Mason <jonmason@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/cygnus-linux.git
S: Maintained
N: iproc
N: cygnus
N: nsp
...
...
That should be sufficient, correct?
Thanks,
Ray
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support
2015-10-06 17:13 ` Ray Jui
@ 2015-10-06 19:20 ` Kishon Vijay Abraham I
2015-10-06 19:23 ` Florian Fainelli
2015-10-06 19:23 ` Ray Jui
0 siblings, 2 replies; 12+ messages in thread
From: Kishon Vijay Abraham I @ 2015-10-06 19:20 UTC (permalink / raw)
To: Ray Jui
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
Hi,
On Tuesday 06 October 2015 10:43 PM, Ray Jui wrote:
> Hi Kishon,
>
> On 10/6/2015 7:25 AM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Monday 21 September 2015 10:47 PM, Ray Jui wrote:
>>> This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
>>> on Cygnus
>>>
>>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>>> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
>>> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
>>> Reviewed-by: Scott Branden <sbranden@broadcom.com>
>>
>>
>> merged this driver to linux-phy tree. Can you send a separate patch
>> adding yourself as the maintainer of this driver?
>>
>> Thanks
>> Kishon
>
> We have a pool of maintainers to maintain all iProc based device drivers
> (including this PCIe PHY driver for Cygnus):
>
> BROADCOM IPROC ARM ARCHITECTURE
> M: Ray Jui <rjui@broadcom.com>
> M: Scott Branden <sbranden@broadcom.com>
> M: Jon Mason <jonmason@broadcom.com>
> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> L: bcm-kernel-feedback-list@broadcom.com
> T: git git://github.com/broadcom/cygnus-linux.git
> S: Maintained
> N: iproc
> N: cygnus
> N: nsp
> ...
> ...
>
> That should be sufficient, correct?
yes. I think you might still have to add this?
F: drivers/phy/phy-bcm-cygnus-pcie.c
Thanks
Kishon
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support
2015-10-06 19:20 ` Kishon Vijay Abraham I
@ 2015-10-06 19:23 ` Florian Fainelli
2015-10-06 19:25 ` Kishon Vijay Abraham I
2015-10-06 19:23 ` Ray Jui
1 sibling, 1 reply; 12+ messages in thread
From: Florian Fainelli @ 2015-10-06 19:23 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Ray Jui
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
On 06/10/15 12:20, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Tuesday 06 October 2015 10:43 PM, Ray Jui wrote:
>> Hi Kishon,
>>
>> On 10/6/2015 7:25 AM, Kishon Vijay Abraham I wrote:
>>> Hi,
>>>
>>> On Monday 21 September 2015 10:47 PM, Ray Jui wrote:
>>>> This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
>>>> on Cygnus
>>>>
>>>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>>>> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
>>>> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
>>>> Reviewed-by: Scott Branden <sbranden@broadcom.com>
>>>
>>>
>>> merged this driver to linux-phy tree. Can you send a separate patch
>>> adding yourself as the maintainer of this driver?
>>>
>>> Thanks
>>> Kishon
>>
>> We have a pool of maintainers to maintain all iProc based device drivers
>> (including this PCIe PHY driver for Cygnus):
>>
>> BROADCOM IPROC ARM ARCHITECTURE
>> M: Ray Jui <rjui@broadcom.com>
>> M: Scott Branden <sbranden@broadcom.com>
>> M: Jon Mason <jonmason@broadcom.com>
>> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
>> L: bcm-kernel-feedback-list@broadcom.com
>> T: git git://github.com/broadcom/cygnus-linux.git
>> S: Maintained
>> N: iproc
>> N: cygnus
>> N: nsp
>> ...
>> ...
>>
>> That should be sufficient, correct?
>
> yes. I think you might still have to add this?
> F: drivers/phy/phy-bcm-cygnus-pcie.c
The regular expression should already cover that file, what would be the
benefit of explicitly listing this additional file?
--
Florian
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support
2015-10-06 19:20 ` Kishon Vijay Abraham I
2015-10-06 19:23 ` Florian Fainelli
@ 2015-10-06 19:23 ` Ray Jui
2015-10-06 19:25 ` Kishon Vijay Abraham I
1 sibling, 1 reply; 12+ messages in thread
From: Ray Jui @ 2015-10-06 19:23 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
On 10/6/2015 12:20 PM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On Tuesday 06 October 2015 10:43 PM, Ray Jui wrote:
>> Hi Kishon,
>>
>> On 10/6/2015 7:25 AM, Kishon Vijay Abraham I wrote:
>>> Hi,
>>>
>>> On Monday 21 September 2015 10:47 PM, Ray Jui wrote:
>>>> This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
>>>> on Cygnus
>>>>
>>>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>>>> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
>>>> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
>>>> Reviewed-by: Scott Branden <sbranden@broadcom.com>
>>>
>>>
>>> merged this driver to linux-phy tree. Can you send a separate patch
>>> adding yourself as the maintainer of this driver?
>>>
>>> Thanks
>>> Kishon
>>
>> We have a pool of maintainers to maintain all iProc based device drivers
>> (including this PCIe PHY driver for Cygnus):
>>
>> BROADCOM IPROC ARM ARCHITECTURE
>> M: Ray Jui <rjui@broadcom.com>
>> M: Scott Branden <sbranden@broadcom.com>
>> M: Jon Mason <jonmason@broadcom.com>
>> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
>> L: bcm-kernel-feedback-list@broadcom.com
>> T: git git://github.com/broadcom/cygnus-linux.git
>> S: Maintained
>> N: iproc
>> N: cygnus
>> N: nsp
>> ...
>> ...
>>
>> That should be sufficient, correct?
>
> yes. I think you might still have to add this?
> F: drivers/phy/phy-bcm-cygnus-pcie.c
>
> Thanks
> Kishon
>
I think the following should already helped to take care of it?
N: cygnus
Ray
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support
2015-10-06 19:23 ` Florian Fainelli
@ 2015-10-06 19:25 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 12+ messages in thread
From: Kishon Vijay Abraham I @ 2015-10-06 19:25 UTC (permalink / raw)
To: Florian Fainelli, Ray Jui
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
Hi.
On Wednesday 07 October 2015 12:53 AM, Florian Fainelli wrote:
> On 06/10/15 12:20, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Tuesday 06 October 2015 10:43 PM, Ray Jui wrote:
>>> Hi Kishon,
>>>
>>> On 10/6/2015 7:25 AM, Kishon Vijay Abraham I wrote:
>>>> Hi,
>>>>
>>>> On Monday 21 September 2015 10:47 PM, Ray Jui wrote:
>>>>> This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
>>>>> on Cygnus
>>>>>
>>>>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>>>>> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
>>>>> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
>>>>> Reviewed-by: Scott Branden <sbranden@broadcom.com>
>>>>
>>>>
>>>> merged this driver to linux-phy tree. Can you send a separate patch
>>>> adding yourself as the maintainer of this driver?
>>>>
>>>> Thanks
>>>> Kishon
>>>
>>> We have a pool of maintainers to maintain all iProc based device drivers
>>> (including this PCIe PHY driver for Cygnus):
>>>
>>> BROADCOM IPROC ARM ARCHITECTURE
>>> M: Ray Jui <rjui@broadcom.com>
>>> M: Scott Branden <sbranden@broadcom.com>
>>> M: Jon Mason <jonmason@broadcom.com>
>>> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
>>> L: bcm-kernel-feedback-list@broadcom.com
>>> T: git git://github.com/broadcom/cygnus-linux.git
>>> S: Maintained
>>> N: iproc
>>> N: cygnus
>>> N: nsp
>>> ...
>>> ...
>>>
>>> That should be sufficient, correct?
>>
>> yes. I think you might still have to add this?
>> F: drivers/phy/phy-bcm-cygnus-pcie.c
>
> The regular expression should already cover that file, what would be the
> benefit of explicitly listing this additional file?
>
Indeed. Sorry for the noise.
Thanks
Kishon
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support
2015-10-06 19:23 ` Ray Jui
@ 2015-10-06 19:25 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 12+ messages in thread
From: Kishon Vijay Abraham I @ 2015-10-06 19:25 UTC (permalink / raw)
To: Ray Jui
Cc: Arnd Bergmann, linux-kernel, JD (Jiandong) Zheng,
Arun Parameswaran, bcm-kernel-feedback-list
On Wednesday 07 October 2015 12:53 AM, Ray Jui wrote:
>
>
> On 10/6/2015 12:20 PM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Tuesday 06 October 2015 10:43 PM, Ray Jui wrote:
>>> Hi Kishon,
>>>
>>> On 10/6/2015 7:25 AM, Kishon Vijay Abraham I wrote:
>>>> Hi,
>>>>
>>>> On Monday 21 September 2015 10:47 PM, Ray Jui wrote:
>>>>> This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
>>>>> on Cygnus
>>>>>
>>>>> Signed-off-by: Ray Jui <rjui@broadcom.com>
>>>>> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
>>>>> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
>>>>> Reviewed-by: Scott Branden <sbranden@broadcom.com>
>>>>
>>>>
>>>> merged this driver to linux-phy tree. Can you send a separate patch
>>>> adding yourself as the maintainer of this driver?
>>>>
>>>> Thanks
>>>> Kishon
>>>
>>> We have a pool of maintainers to maintain all iProc based device drivers
>>> (including this PCIe PHY driver for Cygnus):
>>>
>>> BROADCOM IPROC ARM ARCHITECTURE
>>> M: Ray Jui <rjui@broadcom.com>
>>> M: Scott Branden <sbranden@broadcom.com>
>>> M: Jon Mason <jonmason@broadcom.com>
>>> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
>>> L: bcm-kernel-feedback-list@broadcom.com
>>> T: git git://github.com/broadcom/cygnus-linux.git
>>> S: Maintained
>>> N: iproc
>>> N: cygnus
>>> N: nsp
>>> ...
>>> ...
>>>
>>> That should be sufficient, correct?
>>
>> yes. I think you might still have to add this?
>> F: drivers/phy/phy-bcm-cygnus-pcie.c
>>
>> Thanks
>> Kishon
>>
>
> I think the following should already helped to take care of it?
> N: cygnus
yes.. you are right!
-Kishon
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-10-06 19:25 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-09-21 17:17 [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support Ray Jui
2015-09-21 17:17 ` [PATCH v5 1/2] dt-bindings: Add Cygnus PCIe PHY binding doc Ray Jui
2015-09-21 17:17 ` [PATCH v5 2/2] phy: cygnus: pcie: Add Cygnus PCIe PHY support Ray Jui
2015-10-06 14:25 ` Kishon Vijay Abraham I
2015-10-06 17:13 ` Ray Jui
2015-10-06 19:20 ` Kishon Vijay Abraham I
2015-10-06 19:23 ` Florian Fainelli
2015-10-06 19:25 ` Kishon Vijay Abraham I
2015-10-06 19:23 ` Ray Jui
2015-10-06 19:25 ` Kishon Vijay Abraham I
2015-09-28 16:03 ` [PATCH v5 0/2] Add Cygnus PCIe Serdes/PHY support Ray Jui
2015-09-29 13:24 ` Kishon Vijay Abraham I
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).