LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-power@fi.rohmeurope.com, linux-watchdog@vger.kernel.org,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH v8 2/6] mfd: Support ROHM BD9576MUF and BD9573MUF
Date: Thu, 11 Feb 2021 11:48:05 +0200
Message-ID: <560b9748094392493ebf7af11b6cc558776c4fd5.1613031055.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1613031055.git.matti.vaittinen@fi.rohmeurope.com>

Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are
mainly used to power the R-Car series processors.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
Changes:
 - Comments fixed based on suggestions from Lee
 - Name of regulator cell changed as suggested by Lee
 - Renamed MFD cell variables for better readability
 - Aligned header definitions for better readability

 drivers/mfd/Kconfig              |  11 ++++
 drivers/mfd/Makefile             |   1 +
 drivers/mfd/rohm-bd9576.c        | 109 +++++++++++++++++++++++++++++++
 include/linux/mfd/rohm-bd957x.h  |  59 +++++++++++++++++
 include/linux/mfd/rohm-generic.h |   2 +
 5 files changed, 182 insertions(+)
 create mode 100644 drivers/mfd/rohm-bd9576.c
 create mode 100644 include/linux/mfd/rohm-bd957x.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bdfce7b15621..53c7c96283bd 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1998,6 +1998,17 @@ config MFD_ROHM_BD71828
 	  Also included is a Coulomb counter, a real-time clock (RTC), and
 	  a 32.768 kHz clock gate.
 
+config MFD_ROHM_BD957XMUF
+	tristate "ROHM BD9576MUF and BD9573MUF Power Management ICs"
+	depends on I2C=y
+	depends on OF
+	select REGMAP_I2C
+	select MFD_CORE
+	help
+	  Select this option to get support for the ROHM BD9576MUF and
+	  BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily
+	  designed to be used to power R-Car series processors.
+
 config MFD_STM32_LPTIMER
 	tristate "Support for STM32 Low-Power Timer"
 	depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 14fdb188af02..e58fae024bb2 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -262,6 +262,7 @@ obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
 obj-$(CONFIG_MFD_ROHM_BD70528)	+= rohm-bd70528.o
 obj-$(CONFIG_MFD_ROHM_BD71828)	+= rohm-bd71828.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
+obj-$(CONFIG_MFD_ROHM_BD957XMUF)	+= rohm-bd9576.o
 obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
 obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
 
diff --git a/drivers/mfd/rohm-bd9576.c b/drivers/mfd/rohm-bd9576.c
new file mode 100644
index 000000000000..efd439677c9e
--- /dev/null
+++ b/drivers/mfd/rohm-bd9576.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 ROHM Semiconductors
+ *
+ * ROHM BD9576MUF and BD9573MUF PMIC driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rohm-bd957x.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+static struct mfd_cell bd9573_mfd_cells[] = {
+	{ .name = "bd9573-regulator", },
+	{ .name = "bd9576-wdt", },
+};
+
+static struct mfd_cell bd9576_mfd_cells[] = {
+	{ .name = "bd9576-regulator", },
+	{ .name = "bd9576-wdt", },
+};
+
+static const struct regmap_range volatile_ranges[] = {
+	regmap_reg_range(BD957X_REG_SMRB_ASSERT, BD957X_REG_SMRB_ASSERT),
+	regmap_reg_range(BD957X_REG_PMIC_INTERNAL_STAT,
+			 BD957X_REG_PMIC_INTERNAL_STAT),
+	regmap_reg_range(BD957X_REG_INT_THERM_STAT, BD957X_REG_INT_THERM_STAT),
+	regmap_reg_range(BD957X_REG_INT_OVP_STAT, BD957X_REG_INT_SYS_STAT),
+	regmap_reg_range(BD957X_REG_INT_MAIN_STAT, BD957X_REG_INT_MAIN_STAT),
+};
+
+static const struct regmap_access_table volatile_regs = {
+	.yes_ranges = &volatile_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(volatile_ranges),
+};
+
+static struct regmap_config bd957x_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &volatile_regs,
+	.max_register = BD957X_MAX_REGISTER,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int bd957x_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	int ret;
+	struct regmap *regmap;
+	struct mfd_cell *cells;
+	int num_cells;
+	unsigned long chip_type;
+
+	chip_type = (unsigned long)of_device_get_match_data(&i2c->dev);
+
+	switch (chip_type) {
+	case ROHM_CHIP_TYPE_BD9576:
+		cells = bd9576_mfd_cells;
+		num_cells = ARRAY_SIZE(bd9576_mfd_cells);
+		break;
+	case ROHM_CHIP_TYPE_BD9573:
+		cells = bd9573_mfd_cells;
+		num_cells = ARRAY_SIZE(bd9573_mfd_cells);
+		break;
+	default:
+		dev_err(&i2c->dev, "Unknown device type");
+		return -EINVAL;
+	}
+
+	regmap = devm_regmap_init_i2c(i2c, &bd957x_regmap);
+	if (IS_ERR(regmap)) {
+		dev_err(&i2c->dev, "Failed to initialize Regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, cells,
+				   num_cells, NULL, 0, NULL);
+	if (ret)
+		dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+	return ret;
+}
+
+static const struct of_device_id bd957x_of_match[] = {
+	{ .compatible = "rohm,bd9576", .data = (void *)ROHM_CHIP_TYPE_BD9576, },
+	{ .compatible = "rohm,bd9573", .data = (void *)ROHM_CHIP_TYPE_BD9573, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bd957x_of_match);
+
+static struct i2c_driver bd957x_drv = {
+	.driver = {
+		.name = "rohm-bd957x",
+		.of_match_table = bd957x_of_match,
+	},
+	.probe = &bd957x_i2c_probe,
+};
+module_i2c_driver(bd957x_drv);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD9576MUF and BD9573MUF Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rohm-bd957x.h b/include/linux/mfd/rohm-bd957x.h
new file mode 100644
index 000000000000..ae59c0f7188d
--- /dev/null
+++ b/include/linux/mfd/rohm-bd957x.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2020 ROHM Semiconductors */
+
+#ifndef __LINUX_MFD_BD957X_H__
+#define __LINUX_MFD_BD957X_H__
+
+enum {
+	BD957X_VD50,
+	BD957X_VD18,
+	BD957X_VDDDR,
+	BD957X_VD10,
+	BD957X_VOUTL1,
+	BD957X_VOUTS1,
+};
+
+#define BD957X_REG_SMRB_ASSERT		0x15
+#define BD957X_REG_PMIC_INTERNAL_STAT	0x20
+#define BD957X_REG_INT_THERM_STAT	0x23
+#define BD957X_REG_INT_THERM_MASK	0x24
+#define BD957X_REG_INT_OVP_STAT		0x25
+#define BD957X_REG_INT_SCP_STAT		0x26
+#define BD957X_REG_INT_OCP_STAT		0x27
+#define BD957X_REG_INT_OVD_STAT		0x28
+#define BD957X_REG_INT_UVD_STAT		0x29
+#define BD957X_REG_INT_UVP_STAT		0x2a
+#define BD957X_REG_INT_SYS_STAT		0x2b
+#define BD957X_REG_INT_SYS_MASK		0x2c
+#define BD957X_REG_INT_MAIN_STAT	0x30
+#define BD957X_REG_INT_MAIN_MASK	0x31
+
+#define BD957X_REG_WDT_CONF		0x16
+
+#define BD957X_REG_POW_TRIGGER1		0x41
+#define BD957X_REG_POW_TRIGGER2		0x42
+#define BD957X_REG_POW_TRIGGER3		0x43
+#define BD957X_REG_POW_TRIGGER4		0x44
+#define BD957X_REG_POW_TRIGGERL1	0x45
+#define BD957X_REG_POW_TRIGGERS1	0x46
+
+#define BD957X_REGULATOR_EN_MASK	0xff
+#define BD957X_REGULATOR_DIS_VAL	0xff
+
+#define BD957X_VSEL_REG_MASK		0xff
+
+#define BD957X_MASK_VOUT1_TUNE		0x87
+#define BD957X_MASK_VOUT2_TUNE		0x87
+#define BD957X_MASK_VOUT3_TUNE		0x1f
+#define BD957X_MASK_VOUT4_TUNE		0x1f
+#define BD957X_MASK_VOUTL1_TUNE		0x87
+
+#define BD957X_REG_VOUT1_TUNE		0x50
+#define BD957X_REG_VOUT2_TUNE		0x53
+#define BD957X_REG_VOUT3_TUNE		0x56
+#define BD957X_REG_VOUT4_TUNE		0x59
+#define BD957X_REG_VOUTL1_TUNE		0x5c
+
+#define BD957X_MAX_REGISTER		0x61
+
+#endif
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
index 4283b5b33e04..58b4f1a0f4af 100644
--- a/include/linux/mfd/rohm-generic.h
+++ b/include/linux/mfd/rohm-generic.h
@@ -12,6 +12,8 @@ enum rohm_chip_type {
 	ROHM_CHIP_TYPE_BD71847,
 	ROHM_CHIP_TYPE_BD70528,
 	ROHM_CHIP_TYPE_BD71828,
+	ROHM_CHIP_TYPE_BD9576,
+	ROHM_CHIP_TYPE_BD9573,
 	ROHM_CHIP_TYPE_AMOUNT
 };
 
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

  parent reply index

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-11  9:46 [PATCH v8 0/6] Support ROHM BD9576MUF and BD9573MUF PMICs Matti Vaittinen
2021-02-11  9:47 ` [PATCH v8 1/6] dt_bindings: mfd: Add " Matti Vaittinen
2021-02-11  9:48 ` Matti Vaittinen [this message]
2021-03-08 13:36   ` [PATCH v8 2/6] mfd: Support ROHM BD9576MUF and BD9573MUF Lee Jones
2021-03-08 14:52     ` Matti Vaittinen
2021-02-11  9:48 ` [PATCH v8 3/6] mfd: bd9576: Add IRQ support Matti Vaittinen
2021-03-08 13:44   ` Lee Jones
2021-02-11  9:49 ` [PATCH v8 4/6] wdt: Support wdt on ROHM BD9576MUF and BD9573MUF Matti Vaittinen
2021-02-11  9:49 ` [PATCH v8 5/6] MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers Matti Vaittinen
2021-02-11  9:50 ` [PATCH v8 6/6] mfd: bd9576: Add safety limit/monitoring registers Matti Vaittinen
2021-03-08 13:47   ` Lee Jones
2021-03-08 15:09     ` Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=560b9748094392493ebf7af11b6cc558776c4fd5.1613031055.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-power@fi.rohmeurope.com \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mazziesaccount@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=wim@linux-watchdog.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lore.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git