Re: [PATCH v8 6/6] mfd: bd9576: Add safety limit/monitoring registers

[Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>]

On Mon, 2021-03-08 at 13:47 +0000, Lee Jones wrote:
> On Thu, 11 Feb 2021, Matti Vaittinen wrote:
> 
> > ROHM BD9576 contains safety features like over/under voltage
> > detection,
> > over curren detection and over temperature detection. Add the
> > configuration register information.
> > 
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > ---
> > 
> > Changes since v7:
> > 	New patch
> > 
> >  include/linux/mfd/rohm-bd957x.h | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> > 
> > diff --git a/include/linux/mfd/rohm-bd957x.h
> > b/include/linux/mfd/rohm-bd957x.h
> > index 3f351a1ae4ab..2bd35260ee8e 100644
> > --- a/include/linux/mfd/rohm-bd957x.h
> > +++ b/include/linux/mfd/rohm-bd957x.h
> > @@ -116,6 +116,25 @@ enum {
> >  #define BD957X_REG_VOUT4_TUNE		0x59
> >  #define BD957X_REG_VOUTL1_TUNE		0x5c
> >  
> > +#define BD9576_REG_VOUT1_OVD		0x51
> > +#define BD9576_REG_VOUT1_UVD		0x52
> > +#define BD9576_REG_VOUT2_OVD		0x54
> > +#define BD9576_REG_VOUT2_UVD		0x55
> > +#define BD9576_REG_VOUT3_OVD		0x57
> > +#define BD9576_REG_VOUT3_UVD		0x58
> > +#define BD9576_REG_VOUT4_OVD		0x5a
> > +#define BD9576_REG_VOUT4_UVD		0x5b
> > +#define BD9576_REG_VOUTL1_OVD		0x5d
> > +#define BD9576_REG_VOUTL1_UVD		0x5e
> > +
> > +#define BD9576_MASK_XVD			0x7f
> > +
> > +#define BD9576_REG_VOUT1S_OCW		0x5f
> > +#define BD9576_REG_VOUT1S_OCP		0x60
> > +
> > +#define BD9576_MASK_VOUT1S_OCW		0x3f
> > +#define BD9576_MASK_VOUT1S_OCP		0x3f
> 
> Just a quick check, are these meant to be the same value?

Thanks for the check. They are both same value.

> 
> If so:
> 
> For my own reference (apply this as-is to your sign-off block):
> 
>   Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> 
Thanks, I'll add your ack.

Best Regards
	Matti