[PATCH] hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook

[PATCH] hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook

[Nishanth Menon]

Thermal hook gpio_fan_get_cur_state is only interested in knowing
the current speed index that was setup in the system, this is
already available as part of fan_data->speed_index which is always
set by set_fan_speed. Using get_fan_speed_index is useful when we
have no idea about the fan speed configuration (for example during
fan_ctrl_init).

When thermal framework invokes
gpio_fan_get_cur_state=>get_fan_speed_index via gpio_fan_get_cur_state
especially in a polled configuration for thermal governor, we
basically hog the i2c interface to the extent that other functions
fail to get any traffic out :(.

Instead, just provide the last state set in the driver - since the gpio
fan driver is responsible for the fan state immaterial of override, the
fan_data->speed_index should accurately reflect the state.

Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")

Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Test logs from linus master  v4.5-rc4-137-g23300f657594 
Without fix: http://paste.ubuntu.org.cn/3948618
With Fix: http://paste.ubuntu.org.cn/3948617

 drivers/hwmon/gpio-fan.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 82de3deeb18a..685568b1236d 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -406,16 +406,11 @@ static int gpio_fan_get_cur_state(struct thermal_cooling_device *cdev,
 				  unsigned long *state)
 {
 	struct gpio_fan_data *fan_data = cdev->devdata;
-	int r;
 
 	if (!fan_data)
 		return -EINVAL;
 
-	r = get_fan_speed_index(fan_data);
-	if (r < 0)
-		return r;
-
-	*state = r;
+	*state = fan_data->speed_index;
 	return 0;
 }
 
-- 
2.7.0

Re: [PATCH] hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook

[Guenter Roeck]

On 02/19/2016 04:09 PM, Nishanth Menon wrote:
> Thermal hook gpio_fan_get_cur_state is only interested in knowing
> the current speed index that was setup in the system, this is
> already available as part of fan_data->speed_index which is always
> set by set_fan_speed. Using get_fan_speed_index is useful when we
> have no idea about the fan speed configuration (for example during
> fan_ctrl_init).
>
> When thermal framework invokes
> gpio_fan_get_cur_state=>get_fan_speed_index via gpio_fan_get_cur_state
> especially in a polled configuration for thermal governor, we
> basically hog the i2c interface to the extent that other functions
> fail to get any traffic out :(.
>
> Instead, just provide the last state set in the driver - since the gpio
> fan driver is responsible for the fan state immaterial of override, the
> fan_data->speed_index should accurately reflect the state.
>
> Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")
>
> Reported-by: Tony Lindgren <tony@atomide.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---

Applied.

Thanks,
Guenter

> Test logs from linus master  v4.5-rc4-137-g23300f657594
> Without fix: http://paste.ubuntu.org.cn/3948618
> With Fix: http://paste.ubuntu.org.cn/3948617
>
>   drivers/hwmon/gpio-fan.c | 7 +------
>   1 file changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
> index 82de3deeb18a..685568b1236d 100644
> --- a/drivers/hwmon/gpio-fan.c
> +++ b/drivers/hwmon/gpio-fan.c
> @@ -406,16 +406,11 @@ static int gpio_fan_get_cur_state(struct thermal_cooling_device *cdev,
>   				  unsigned long *state)
>   {
>   	struct gpio_fan_data *fan_data = cdev->devdata;
> -	int r;
>
>   	if (!fan_data)
>   		return -EINVAL;
>
> -	r = get_fan_speed_index(fan_data);
> -	if (r < 0)
> -		return r;
> -
> -	*state = r;
> +	*state = fan_data->speed_index;
>   	return 0;
>   }
>
>