* [PATCH] elevator: remove second argument in elevator_init()
@ 2016-01-15 1:46 Alexey Klimov
2016-01-27 21:01 ` Jeff Moyer
0 siblings, 1 reply; 5+ messages in thread
From: Alexey Klimov @ 2016-01-15 1:46 UTC (permalink / raw)
To: axboe, linux-block; +Cc: linux-kernel, yury.norov, klimov.linux
Last user of elevator_init() with non-NULL name as second argument
that supposed to be s390 dasd driver has gone few releases ago.
Drivers rely on elevator_change(), elevator_switch() and friends
for example. Right now elevator_init() is always called as
elevator_init(q, NULL).
Patch removes passing of second name argument and its usage.
While we're at it fix following if-check after removed lines. We know
that elevator_type e is initialized by NULL and need to check only
chosen_elevator.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
---
block/blk-core.c | 2 +-
block/elevator.c | 10 ++--------
include/linux/elevator.h | 2 +-
3 files changed, 4 insertions(+), 10 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 33e2f62..f742ef4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -861,7 +861,7 @@ blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
mutex_lock(&q->sysfs_lock);
/* init elevator */
- if (elevator_init(q, NULL)) {
+ if (elevator_init(q)) {
mutex_unlock(&q->sysfs_lock);
goto fail;
}
diff --git a/block/elevator.c b/block/elevator.c
index c3555c9..ff5c830 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -177,7 +177,7 @@ static void elevator_release(struct kobject *kobj)
kfree(e);
}
-int elevator_init(struct request_queue *q, char *name)
+int elevator_init(struct request_queue *q)
{
struct elevator_type *e = NULL;
int err;
@@ -196,18 +196,12 @@ int elevator_init(struct request_queue *q, char *name)
q->end_sector = 0;
q->boundary_rq = NULL;
- if (name) {
- e = elevator_get(name, true);
- if (!e)
- return -EINVAL;
- }
-
/*
* Use the default elevator specified by config boot param or
* config option. Don't try to load modules as we could be running
* off async and request_module() isn't allowed from async.
*/
- if (!e && *chosen_elevator) {
+ if (*chosen_elevator) {
e = elevator_get(chosen_elevator, false);
if (!e)
printk(KERN_ERR "I/O scheduler %s not found\n",
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 638b324..0ae0efd 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -154,7 +154,7 @@ extern void elv_unregister(struct elevator_type *);
extern ssize_t elv_iosched_show(struct request_queue *, char *);
extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t);
-extern int elevator_init(struct request_queue *, char *);
+extern int elevator_init(struct request_queue *);
extern void elevator_exit(struct elevator_queue *);
extern int elevator_change(struct request_queue *, const char *);
extern bool elv_rq_merge_ok(struct request *, struct bio *);
--
2.5.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] elevator: remove second argument in elevator_init()
2016-01-15 1:46 [PATCH] elevator: remove second argument in elevator_init() Alexey Klimov
@ 2016-01-27 21:01 ` Jeff Moyer
2016-03-30 23:31 ` Alexey Klimov
0 siblings, 1 reply; 5+ messages in thread
From: Jeff Moyer @ 2016-01-27 21:01 UTC (permalink / raw)
To: Alexey Klimov; +Cc: axboe, linux-block, linux-kernel, yury.norov
Alexey Klimov <klimov.linux@gmail.com> writes:
> Last user of elevator_init() with non-NULL name as second argument
> that supposed to be s390 dasd driver has gone few releases ago.
> Drivers rely on elevator_change(), elevator_switch() and friends
> for example. Right now elevator_init() is always called as
> elevator_init(q, NULL).
>
> Patch removes passing of second name argument and its usage.
>
> While we're at it fix following if-check after removed lines. We know
> that elevator_type e is initialized by NULL and need to check only
> chosen_elevator.
>
> Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
> ---
> block/blk-core.c | 2 +-
> block/elevator.c | 10 ++--------
> include/linux/elevator.h | 2 +-
> 3 files changed, 4 insertions(+), 10 deletions(-)
>
> diff --git a/block/blk-core.c b/block/blk-core.c
> index 33e2f62..f742ef4 100644
> --- a/block/blk-core.c
> +++ b/block/blk-core.c
> @@ -861,7 +861,7 @@ blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
> mutex_lock(&q->sysfs_lock);
>
> /* init elevator */
> - if (elevator_init(q, NULL)) {
> + if (elevator_init(q)) {
> mutex_unlock(&q->sysfs_lock);
> goto fail;
> }
> diff --git a/block/elevator.c b/block/elevator.c
> index c3555c9..ff5c830 100644
> --- a/block/elevator.c
> +++ b/block/elevator.c
> @@ -177,7 +177,7 @@ static void elevator_release(struct kobject *kobj)
> kfree(e);
> }
>
> -int elevator_init(struct request_queue *q, char *name)
> +int elevator_init(struct request_queue *q)
> {
> struct elevator_type *e = NULL;
> int err;
> @@ -196,18 +196,12 @@ int elevator_init(struct request_queue *q, char *name)
> q->end_sector = 0;
> q->boundary_rq = NULL;
>
> - if (name) {
> - e = elevator_get(name, true);
> - if (!e)
> - return -EINVAL;
> - }
> -
> /*
> * Use the default elevator specified by config boot param or
> * config option. Don't try to load modules as we could be running
> * off async and request_module() isn't allowed from async.
> */
> - if (!e && *chosen_elevator) {
> + if (*chosen_elevator) {
> e = elevator_get(chosen_elevator, false);
> if (!e)
> printk(KERN_ERR "I/O scheduler %s not found\n",
> diff --git a/include/linux/elevator.h b/include/linux/elevator.h
> index 638b324..0ae0efd 100644
> --- a/include/linux/elevator.h
> +++ b/include/linux/elevator.h
> @@ -154,7 +154,7 @@ extern void elv_unregister(struct elevator_type *);
> extern ssize_t elv_iosched_show(struct request_queue *, char *);
> extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t);
>
> -extern int elevator_init(struct request_queue *, char *);
> +extern int elevator_init(struct request_queue *);
> extern void elevator_exit(struct elevator_queue *);
> extern int elevator_change(struct request_queue *, const char *);
> extern bool elv_rq_merge_ok(struct request *, struct bio *);
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] elevator: remove second argument in elevator_init()
2016-01-27 21:01 ` Jeff Moyer
@ 2016-03-30 23:31 ` Alexey Klimov
2016-03-31 0:34 ` Jens Axboe
0 siblings, 1 reply; 5+ messages in thread
From: Alexey Klimov @ 2016-03-30 23:31 UTC (permalink / raw)
To: axboe, linux-block; +Cc: Linux Kernel Mailing List, Jeff Moyer, Yury Norov
Hi all,
On Wed, Jan 27, 2016 at 9:01 PM, Jeff Moyer <jmoyer@redhat.com> wrote:
> Alexey Klimov <klimov.linux@gmail.com> writes:
>
>> Last user of elevator_init() with non-NULL name as second argument
>> that supposed to be s390 dasd driver has gone few releases ago.
>> Drivers rely on elevator_change(), elevator_switch() and friends
>> for example. Right now elevator_init() is always called as
>> elevator_init(q, NULL).
>>
>> Patch removes passing of second name argument and its usage.
>>
>> While we're at it fix following if-check after removed lines. We know
>> that elevator_type e is initialized by NULL and need to check only
>> chosen_elevator.
>>
>> Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
>
> Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
what is the status of this patch? Is it that wrong and are there some
concerns or do I need to resend it?
Best regards,
Alexey
>> ---
>> block/blk-core.c | 2 +-
>> block/elevator.c | 10 ++--------
>> include/linux/elevator.h | 2 +-
>> 3 files changed, 4 insertions(+), 10 deletions(-)
>>
>> diff --git a/block/blk-core.c b/block/blk-core.c
>> index 33e2f62..f742ef4 100644
>> --- a/block/blk-core.c
>> +++ b/block/blk-core.c
>> @@ -861,7 +861,7 @@ blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
>> mutex_lock(&q->sysfs_lock);
>>
>> /* init elevator */
>> - if (elevator_init(q, NULL)) {
>> + if (elevator_init(q)) {
>> mutex_unlock(&q->sysfs_lock);
>> goto fail;
>> }
>> diff --git a/block/elevator.c b/block/elevator.c
>> index c3555c9..ff5c830 100644
>> --- a/block/elevator.c
>> +++ b/block/elevator.c
>> @@ -177,7 +177,7 @@ static void elevator_release(struct kobject *kobj)
>> kfree(e);
>> }
>>
>> -int elevator_init(struct request_queue *q, char *name)
>> +int elevator_init(struct request_queue *q)
>> {
>> struct elevator_type *e = NULL;
>> int err;
>> @@ -196,18 +196,12 @@ int elevator_init(struct request_queue *q, char *name)
>> q->end_sector = 0;
>> q->boundary_rq = NULL;
>>
>> - if (name) {
>> - e = elevator_get(name, true);
>> - if (!e)
>> - return -EINVAL;
>> - }
>> -
>> /*
>> * Use the default elevator specified by config boot param or
>> * config option. Don't try to load modules as we could be running
>> * off async and request_module() isn't allowed from async.
>> */
>> - if (!e && *chosen_elevator) {
>> + if (*chosen_elevator) {
>> e = elevator_get(chosen_elevator, false);
>> if (!e)
>> printk(KERN_ERR "I/O scheduler %s not found\n",
>> diff --git a/include/linux/elevator.h b/include/linux/elevator.h
>> index 638b324..0ae0efd 100644
>> --- a/include/linux/elevator.h
>> +++ b/include/linux/elevator.h
>> @@ -154,7 +154,7 @@ extern void elv_unregister(struct elevator_type *);
>> extern ssize_t elv_iosched_show(struct request_queue *, char *);
>> extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t);
>>
>> -extern int elevator_init(struct request_queue *, char *);
>> +extern int elevator_init(struct request_queue *);
>> extern void elevator_exit(struct elevator_queue *);
>> extern int elevator_change(struct request_queue *, const char *);
>> extern bool elv_rq_merge_ok(struct request *, struct bio *);
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] elevator: remove second argument in elevator_init()
2016-03-30 23:31 ` Alexey Klimov
@ 2016-03-31 0:34 ` Jens Axboe
2016-09-27 0:13 ` Alexey Klimov
0 siblings, 1 reply; 5+ messages in thread
From: Jens Axboe @ 2016-03-31 0:34 UTC (permalink / raw)
To: Alexey Klimov, linux-block
Cc: Linux Kernel Mailing List, Jeff Moyer, Yury Norov
On 03/30/2016 05:31 PM, Alexey Klimov wrote:
> Hi all,
>
> On Wed, Jan 27, 2016 at 9:01 PM, Jeff Moyer <jmoyer@redhat.com> wrote:
>> Alexey Klimov <klimov.linux@gmail.com> writes:
>>
>>> Last user of elevator_init() with non-NULL name as second argument
>>> that supposed to be s390 dasd driver has gone few releases ago.
>>> Drivers rely on elevator_change(), elevator_switch() and friends
>>> for example. Right now elevator_init() is always called as
>>> elevator_init(q, NULL).
>>>
>>> Patch removes passing of second name argument and its usage.
>>>
>>> While we're at it fix following if-check after removed lines. We know
>>> that elevator_type e is initialized by NULL and need to check only
>>> chosen_elevator.
>>>
>>> Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
>>
>> Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
>
>
> what is the status of this patch? Is it that wrong and are there some
> concerns or do I need to resend it?
It looks fine, I'll pick it up for 4.7.
--
Jens Axboe
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] elevator: remove second argument in elevator_init()
2016-03-31 0:34 ` Jens Axboe
@ 2016-09-27 0:13 ` Alexey Klimov
0 siblings, 0 replies; 5+ messages in thread
From: Alexey Klimov @ 2016-09-27 0:13 UTC (permalink / raw)
To: Jens Axboe, linux-block; +Cc: Linux Kernel Mailing List, Jeff Moyer, Yury Norov
On Thu, Mar 31, 2016 at 1:34 AM, Jens Axboe <axboe@kernel.dk> wrote:
> On 03/30/2016 05:31 PM, Alexey Klimov wrote:
>>
>> Hi all,
>>
>> On Wed, Jan 27, 2016 at 9:01 PM, Jeff Moyer <jmoyer@redhat.com> wrote:
>>>
>>> Alexey Klimov <klimov.linux@gmail.com> writes:
>>>
>>>> Last user of elevator_init() with non-NULL name as second argument
>>>> that supposed to be s390 dasd driver has gone few releases ago.
>>>> Drivers rely on elevator_change(), elevator_switch() and friends
>>>> for example. Right now elevator_init() is always called as
>>>> elevator_init(q, NULL).
>>>>
>>>> Patch removes passing of second name argument and its usage.
>>>>
>>>> While we're at it fix following if-check after removed lines. We know
>>>> that elevator_type e is initialized by NULL and need to check only
>>>> chosen_elevator.
>>>>
>>>> Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
>>>
>>>
>>> Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
>>
>>
>>
>> what is the status of this patch? Is it that wrong and are there some
>> concerns or do I need to resend it?
>
>
> It looks fine, I'll pick it up for 4.7.
>
> --
> Jens Axboe
So, I guess this one was lost: I can't find it in the tree.
Looks like the easiest way will be to rebase (and check that it's
still fine) and resend. Right?
Best regards,
Alexey.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-09-27 0:13 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-15 1:46 [PATCH] elevator: remove second argument in elevator_init() Alexey Klimov
2016-01-27 21:01 ` Jeff Moyer
2016-03-30 23:31 ` Alexey Klimov
2016-03-31 0:34 ` Jens Axboe
2016-09-27 0:13 ` Alexey Klimov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).