Re: [PATCH v14 0/17] Add Analogix Core Display Port Driver

[Yakir Yang <ykk@rock-chips.com>]

On 07/29/2016 04:38 PM, Tomeu Vizoso wrote:
> On 5 April 2016 at 04:06, Yakir Yang <ykk@rock-chips.com> wrote:
>> Hi Daniel,
>>
>>
>> On 03/31/2016 06:15 PM, Daniel Vetter wrote:
>>> On Mon, Feb 15, 2016 at 07:08:05PM +0800, Yakir Yang wrote:
>>>> Hi all,
>>>>
>>>>     The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
>>>> share the same IP, so a lot of parts can be re-used. I split the common
>>>> code into bridge directory, then rk3288 and exynos only need to keep
>>>> some platform code. Cause I can't find the exact IP name of exynos dp
>>>> controller, so I decide to name dp core driver with "analogix" which I
>>>> find in rk3288 eDP TRM
>>>>
>>>> But there are still three light registers setting different between
>>>> exynos and rk3288.
>>>> 1. RK3288 have five special pll registers which not indicate in exynos
>>>>      dp controller.
>>>> 2. The address of DP_PHY_PD(dp phy power manager register) are different
>>>>      between rk3288 and exynos.
>>>> 3. Rk3288 and exynos have different setting with AUX_HW_RETRY_CTL(dp
>>>> debug
>>>>      register).
>>>>
>>>> Due to Mark Yao have introduced the ATOMIC support to Rockchip drm, so
>>>> it's
>>>> okay to use the ATOMIC helpers functions in connector_funcs. No need to
>>>> splict
>>>> the connector init to platform driver anymore, and this is the biggest
>>>> change
>>>> since version 11.
>>>>
>>>> This v14 didn't have lots of new changes which seems not the correct time
>>>> to
>>>> upgrade the version number, but I have changed ordering of patches
>>>> (adding 2
>>>> more, and removing 2 out). Especially to prevent confusing people, so I
>>>> updated
>>>> the whole series.
>>> So I'm jumping into this part way late, but just noticed (well Thierry
>>> pointed this out to me) that the exynos dp driver reinvents all the dp and
>>> dp-aux helpers we already. That's somewhat okish for a private driver (and
>>> exynos has a reputation for that kind of stuff), but imo not ok for a
>>> shared driver.
>>>
>>> Not saying this should block merging this patch, but it really needs to be
>>> addressed. All the dp aux and edid read code in the current
>>> exynos_dp_core/reg.c files needs to be replaced with dp helpers and the
>>> core i2c edid reading code.
>>>
>>> Who's going to sign up to do this?
>>
>> Volunteer to that, after finish this thread, I would send new series to
>> switch to take use of dp helper.
> Hi Yakir,
>
> do you have plans to do this work in the short term? If not, I can tackle it.

Wow, that would be great if you like to tackle it  :-D

I always keep this in my mind, but haven't found an chance
to finish it. I would like to sit in your Cc list when you post
them out  ;)

Best Regards,
- Yakir

> Regards,
>
> Tomeu
>
>> :-D
>> - Yakir
>>
>>
>>> -Daniel
>>>
>>>> Thanks,
>>>> - Yakir
>>>>
>>>>
>>>> Changes in v14:
>>>> - Rebase the new changes in imx-dp driver
>>>> - Split up this patch into 3 parts, make this easy to review (Heiko)
>>>> - Remove the Rockchip DP PHY to an separate thread (Heiko)
>>>>       https://patchwork.kernel.org/patch/8312701/
>>>>
>>>> Changes in v13:
>>>> - Use .enable instead of preprare/commit in encoder_helper_funcs (Heiko)
>>>> - Fix the missing parameters with drm_encoder_init() helper function.
>>>> (Heiko)
>>>>
>>>> Changes in v12:
>>>> - Move the connector init to analogix_dp driver, and using ATOMIC helper
>>>> (Heiko)
>>>> - Add the ack from Jingoo
>>>> - Remove the enum link_rate_type struct, using the marcos in
>>>> drm_dp_helper.h (Jingoo)
>>>>
>>>> Changes in v11:
>>>> - Uses tabs to fix the indentation issues in analogix_dp_core.h (Heiko)
>>>> - Rename the "analogix,need-force-hpd" to common 'force-hpd' (Rob)
>>>> - Add the ack from Rob Herring
>>>> - Revert parts of Gustavo Padovan's changes in commit:
>>>>          drm/exynos: do not start enabling DP at bind() phase
>>>>     Add dp phy poweron function in bind time.
>>>> - Move the panel prepare from get_modes time to bind time, and move
>>>>     the panel unprepare from bridge->disable to unbind time. (Heiko)
>>>>
>>>> Changes in v10:
>>>> - Add the ack from Rob Herring
>>>> - Correct the ROCKCHIP_ANALOGIX_DP indentation in Kconfig to tabs here
>>>> (Heiko)
>>>> - Add the ack from Rob Herring
>>>> - Remove the surplus "plat_data" check. (Heiko)
>>>> -       switch (dp->plat_data && dp->plat_data->dev_type) {
>>>> +       switch (dp->plat_data->dev_type) {
>>>>
>>>> Changes in v9:
>>>> - Document more details for 'ports' property.
>>>>
>>>> Changes in v8:
>>>> - Correct the right document path of display-timing.txt (Heiko)
>>>> - Correct the misspell of 'from' to 'frm'. (Heiko)
>>>> - Modify the commit subject name. (Heiko)
>>>>
>>>> Changes in v7:
>>>> - Back to use the of_property_read_bool() interfacs to provoid backward
>>>>     compatibility of "hsync-active-high" "vsync-active-high" "interlaced"
>>>>     to avoid -EOVERFLOW error (Krzysztof)
>>>>
>>>> Changes in v6:
>>>> - Fix the Kconfig recursive dependency (Javier)
>>>> - Fix Peach Pit hpd property name error:
>>>> -       hpd-gpio = <&gpx2 6 0>;
>>>> +       hpd-gpios = <&gpx2 6 0>;
>>>>
>>>> Changes in v5:
>>>> - Correct the check condition of gpio_is_valid when driver try to get
>>>>     the "hpd-gpios" DT propery. (Heiko)
>>>> - Move the platform attach callback in the front of core driver bridge
>>>>     attch function. Cause once platform failed at attach, core driver
>>>> should
>>>>     still failed, so no need to init connector before platform attached
>>>> (Krzysztof)
>>>> - Keep code style no changes with the previous exynos_dp_code.c in this
>>>>     patch, and update commit message about the new export symbol
>>>> (Krzysztof)
>>>> - Gather the device type patch (v4 11/16) into this one. (Krzysztof)
>>>> - leave out the connector registration to analogix platform driver.
>>>> (Thierry)
>>>> - Resequence this patch after analogix_dp driver have been split
>>>>     from exynos_dp code, and rephrase reasonable commit message, and
>>>>     remove some controversial style (Krzysztof)
>>>>       -          analogix_dp_write_byte_to_dpcd(
>>>>       -                          dp, DP_TEST_RESPONSE,
>>>>       +          analogix_dp_write_byte_to_dpcd(dp,
>>>>       +                          DP_TEST_RESPONSE,
>>>>                                  DP_TEST_EDID_CHECKSUM_WRITE);
>>>> - Switch video timing type to "u32", so driver could use
>>>> "of_property_read_u32"
>>>>     to get the backword timing values. Krzysztof suggest me that driver
>>>> could use
>>>>     the "of_property_read_bool" to get backword timing values, but that
>>>> interfacs
>>>>     would modify the original drm_display_mode timing directly (whether
>>>> those
>>>>     properties exists or not).
>>>> - Correct the misspell in commit message. (Krzysztof)
>>>> - Remove the empty line at the end of document, and correct the endpoint
>>>>     numbers in the example DT node, and remove the regulator iomux setting
>>>>     in driver code while using the pinctl in devicetree instead. (Heiko)
>>>> - Add device type declared, cause the previous "platform device type
>>>>     support (v4 11/16)" already merge into (v5 02/14).
>>>> - Implement connector registration code. (Thierry)
>>>> - Split binding doc's from driver changes. (Rob)
>>>> - Add eDP hotplug pinctrl property. (Heiko)
>>>>
>>>> Changes in v4:
>>>> - Update "analogix,hpd-gpios" to "hpd-gpios" DT propery. (Rob)
>>>> - Rename "analogix_dp-exynos.c" file name to "exynos_dp.c" (Jingoo)
>>>> - Create a separate folder for analogix code in bridge/ (Archit)
>>>> - Update commit message more readable. (Jingoo)
>>>> - Adjust the order from 05 to 04
>>>> - Provide backword compatibility with samsung. (Krzysztof)
>>>> - Split all DTS changes, and provide backward compatibility. Mark old
>>>>     properties as deprecated but still support them. (Krzysztof)
>>>> - Update "analogix,hpd-gpio" to "hpd-gpios" prop name. (Rob)
>>>> - Deprecated some properties which could parsed from Edid/Mode/DPCD.
>>>> (Thierry)
>>>>       "analogix,color-space" & "analogix,color-depth"   &
>>>>       "analogix,link-rate"   & "analogix,lane-count"    &
>>>>       "analogix,ycbcr-coeff" & "analogix,dynamic-range" &
>>>>       "vsync-active-high"    & "hsync-active-high"      & "interlaces"
>>>> - Separate all DTS changes to a separate patch. (Krzysztof)
>>>> - Remove some deprecated DT properties in rockchip dp document.
>>>> - Seprate the link-rate and lane-count limit out with the device_type
>>>>     flag. (Thierry)
>>>> - Take Jingoo suggest, add commit messages.
>>>> - Call drm_panel_prepare() in .get_modes function, ensure panel should
>>>>     power on before driver try to read edid message.
>>>>
>>>> Changes in v3:
>>>> - Move exynos's video_timing code to analogix_dp-exynos platform driver,
>>>>     add get_modes method to struct analogix_dp_plat_data. (Thierry)
>>>> - Rename some "samsung*" dts propery to "analogix*". (Heiko)
>>>> - The link_rate and lane_count shouldn't config to the DT property value
>>>>     directly, but we can take those as hardware limite. For example,
>>>> RK3288
>>>>     only support 4 physical lanes of 2.7/1.62 Gbps/lane, so DT property
>>>> would
>>>>     like "link-rate = 0x0a" "lane-count = 4". (Thierry)
>>>> - Dynamic parse video timing info from struct drm_display_mode and
>>>>     struct drm_display_info. (Thierry)
>>>> - Add devicetree binding documents. (Heiko)
>>>> - Remove sync pol & colorimetry properies from the new analogix dp driver
>>>>     devicetree binding. (Thierry)
>>>> - Update the exist exynos dtsi file with the latest DP DT properies.
>>>> - Leave "sclk_edp_24m" to rockchip dp phy driver which name to "24m",
>>>>     and leave "sclk_edp" to analogix dp core driver which name to "dp",
>>>>     and leave "pclk_edp" to rockchip dp platform driver which name to
>>>>     "pclk". (Thierry & Heiko)
>>>> - Add devicetree binding document. (Heiko)
>>>> - Remove "rockchip,panel" DT property, take use of remote point to get
>>>> panel
>>>>     node. (Heiko)
>>>> - Add the new function point dp_platdata->get_modes() init.
>>>> - Add "analogix,need-force-hpd" to indicate whether driver need foce
>>>>     hpd when hpd detect failed.
>>>> - move dp hpd detect to connector detect function.
>>>> - Add edid modes parse support
>>>>
>>>> Changes in v2:
>>>> - Remove new copyright (Jingoo)
>>>> - Fix compiled failed due to analogix_dp_device misspell
>>>> - Improved commit message more readable, and avoid using some
>>>>     uncommon style like bellow: (Joe Preches)
>>>>       -  retval = exynos_dp_read_bytes_from_i2c(...
>>>>                                    ...);
>>>>       +  retval =
>>>>       +  exynos_dp_read_bytes_from_i2c(......);
>>>> - Get panel node with remote-endpoint method, and create devicetree
>>>> binding
>>>>     for driver. (Heiko)
>>>> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>>>>     leave those clock to rockchip dp phy driver.
>>>> - Fix compile failed dut to phy_pd_addr variable misspell error
>>>>
>>>> Heiko Stuebner (2):
>>>>     drm/exynos: dp: rename implementation specific driver part
>>>>     drm: bridge: analogix/dp: rename register constants
>>>>
>>>> Yakir Yang (15):
>>>>     drm: bridge: analogix/dp: split exynos dp driver to bridge directory
>>>>     drm: bridge: analogix/dp: fix some obvious code style
>>>>     drm: bridge: analogix/dp: remove duplicate configuration of link rate
>>>>       and link count
>>>>     drm: bridge: analogix/dp: dynamic parse sync_pol & interlace &
>>>>       dynamic_range
>>>>     dt-bindings: add document for analogix display port driver
>>>>     ARM: dts: exynos/dp: remove some properties that deprecated by
>>>>       analogix_dp driver
>>>>     drm: rockchip: dp: add rockchip platform dp driver
>>>>     dt-bindings: add document for rockchip variant of analogix_dp
>>>>     drm: bridge: analogix/dp: add some rk3288 special registers setting
>>>>     drm: bridge: analogix/dp: add max link rate and lane count limit for
>>>>       RK3288
>>>>     drm: bridge: analogix/dp: try force hpd after plug in lookup failed
>>>>     drm: bridge: analogix/dp: move hpd detect to connector detect function
>>>>     drm: bridge: analogix/dp: add edid modes parse in get_modes method
>>>>     drm: bridge: analogix/dp: add panel prepare/unprepare in
>>>>       suspend/resume time
>>>>     drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable
>>>>       time
>>>>
>>>>    .../bindings/display/bridge/analogix_dp.txt        |   52 +
>>>>    .../bindings/display/exynos/exynos_dp.txt          |   93 +-
>>>>    .../display/rockchip/analogix_dp-rockchip.txt      |   92 ++
>>>>    arch/arm/boot/dts/exynos5250-arndale.dts           |    2 -
>>>>    arch/arm/boot/dts/exynos5250-smdk5250.dts          |    2 -
>>>>    arch/arm/boot/dts/exynos5250-snow-common.dtsi      |    4 +-
>>>>    arch/arm/boot/dts/exynos5250-spring.dts            |    4 +-
>>>>    arch/arm/boot/dts/exynos5420-peach-pit.dts         |    4 +-
>>>>    arch/arm/boot/dts/exynos5420-smdk5420.dts          |    2 -
>>>>    arch/arm/boot/dts/exynos5800-peach-pi.dts          |    2 -
>>>>    drivers/gpu/drm/bridge/Kconfig                     |    2 +
>>>>    drivers/gpu/drm/bridge/Makefile                    |    1 +
>>>>    drivers/gpu/drm/bridge/analogix/Kconfig            |    3 +
>>>>    drivers/gpu/drm/bridge/analogix/Makefile           |    1 +
>>>>    drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1430
>>>> ++++++++++++++++++
>>>>    drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |  281 ++++
>>>>    drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  | 1320
>>>> +++++++++++++++++
>>>>    .../analogix/analogix_dp_reg.h}                    |  270 ++--
>>>>    drivers/gpu/drm/exynos/Kconfig                     |    3 +-
>>>>    drivers/gpu/drm/exynos/Makefile                    |    2 +-
>>>>    drivers/gpu/drm/exynos/exynos_dp.c                 |  324 +++++
>>>>    drivers/gpu/drm/exynos/exynos_dp_core.c            | 1510
>>>> --------------------
>>>>    drivers/gpu/drm/exynos/exynos_dp_core.h            |  282 ----
>>>>    drivers/gpu/drm/exynos/exynos_dp_reg.c             | 1263
>>>> ----------------
>>>>    drivers/gpu/drm/rockchip/Kconfig                   |    9 +
>>>>    drivers/gpu/drm/rockchip/Makefile                  |    1 +
>>>>    drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    |  384 +++++
>>>>    include/drm/bridge/analogix_dp.h                   |   41 +
>>>>    28 files changed, 4115 insertions(+), 3269 deletions(-)
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
>>>>    create mode 100644
>>>> Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
>>>>    create mode 100644 drivers/gpu/drm/bridge/analogix/Kconfig
>>>>    create mode 100644 drivers/gpu/drm/bridge/analogix/Makefile
>>>>    create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
>>>>    create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
>>>>    create mode 100644 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
>>>>    rename drivers/gpu/drm/{exynos/exynos_dp_reg.h =>
>>>> bridge/analogix/analogix_dp_reg.h} (62%)
>>>>    create mode 100644 drivers/gpu/drm/exynos/exynos_dp.c
>>>>    delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.c
>>>>    delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_core.h
>>>>    delete mode 100644 drivers/gpu/drm/exynos/exynos_dp_reg.c
>>>>    create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>>>    create mode 100644 include/drm/bridge/analogix_dp.h
>>>>
>>>> --
>>>> 1.9.1
>>>>
>>>>
>>>> _______________________________________________
>>>> dri-devel mailing list
>>>> dri-devel@lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>>
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>