* DRM i915
@ 2017-01-08 22:01 Nathaniel Russell
2017-01-08 22:16 ` Ilia Mirkin
0 siblings, 1 reply; 3+ messages in thread
From: Nathaniel Russell @ 2017-01-08 22:01 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 4269 bytes --]
Any help figuring this out would be greatly appreciated.
Linux version 4.8.15 (root@reddog) (gcc version 5.4.0 (GCC) ) #1 Sun Dec
18 22:48:37 CST 2016
pci 0000:00:00.0: Intel G33 Chipset
[ 7.173121] pci 0000:00:00.0: detected gtt size: 524288K total,
262144K mappable
[ 7.173402] pci 0000:00:00.0: detected 8192K stolen memory
[ 7.173568] [drm] Memory usable by graphics device = 512M
[ 7.173651] [drm] Replacing VGA console driver
[ 7.174505] Console: switching to colour dummy device 80x25
[ 7.183053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.183068] [drm] Driver supports precise vblank timestamp query.
[ 7.183330] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.187074] [drm] RC6 disabled, disabling runtime PM support
[ 7.187101] [drm] initialized overlay support
[ 7.187449] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on
minor 0
[ 7.253043] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is
invalid, remainder is 62
[ 7.253061] Raw EDID:
[ 7.253068] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
[ 7.253076] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
[ 7.253084] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
[ 7.253091] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 7.253098] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
[ 7.253106] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
[ 7.253113] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
[ 7.253121] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
[ 7.268019] usb 1-4.3: new high-speed USB device number 5 using ehci-pci
[ 7.287049] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is
invalid, remainder is 62
[ 7.287067] Raw EDID:
[ 7.287074] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
[ 7.287082] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
[ 7.287090] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
[ 7.287097] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 7.287105] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
[ 7.287112] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
[ 7.287120] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
[ 7.287127] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
[ 7.305052] firewire_ohci 0000:02:00.0: added OHCI v1.0 device as
card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 7.321041] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is
invalid, remainder is 62
[ 7.321059] Raw EDID:
[ 7.321066] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
[ 7.321074] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
[ 7.321082] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
[ 7.321089] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 7.321097] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
[ 7.321104] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
[ 7.321112] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
[ 7.321119] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
[ 7.335820] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 7.349149] usb 1-4.3: New USB device found, idVendor=14cd,
idProduct=125d
[ 7.349165] usb 1-4.3: New USB device strings: Mfr=1, Product=3,
SerialNumber=2
[ 7.349178] usb 1-4.3: Product: Mass Storage Device
[ 7.349186] usb 1-4.3: Manufacturer: Generic
[ 7.349193] usb 1-4.3: SerialNumber: 125D20140310
[ 7.356045] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is
invalid, remainder is 62
[ 7.356063] Raw EDID:
[ 7.356070] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
[ 7.356078] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
[ 7.356086] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
[ 7.356093] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 7.356101] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
[ 7.356108] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
[ 7.356115] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
[ 7.356123] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
[ 7.356134] i915 0000:00:02.0: VGA-1: EDID block 0 invalid.
[-- Attachment #2: txt --]
[-- Type: text/plain, Size: 54020 bytes --]
[ 0.000000] Linux version 4.8.15 (root@reddog) (gcc version 5.4.0 (GCC) ) #1 Sun Dec 18 22:48:37 CST 2016
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f58ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f590000-0x000000007f5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f5e3000-0x000000007f5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f5f0000-0x000000007f5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. Inspiron 530/0RY007, BIOS 1.0.3 07/12/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f590 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 07F600000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000f3e30-0x000f3e3f] mapped at [c00f3e30]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] BRK [0x02259000, 0x02259fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F96C0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007F5E3080 00005C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x000000007F5E7200 0000F4 (v03 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20160422/tbfadt-624)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20160422/tbfadt-624)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20160422/tbfadt-624)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20160422/tbfadt-624)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20160422/tbfadt-708)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20160422/tbfadt-708)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20160422/tbfadt-708)
[ 0.000000] ACPI: DSDT 0x000000007F5E3200 003FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x000000007F590000 000040
[ 0.000000] ACPI: FACS 0x000000007F590000 000040
[ 0.000000] ACPI: HPET 0x000000007F5E73C0 000038 (v01 DELL FX09 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 0x000000007F5E7400 00003C (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DMY1 0x000000007F5E7440 000176 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DMY2 0x000000007F5E75C0 000080 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x000000007F5E7300 000084 (v01 DELL FX09 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 0x000000007F5E7CA0 000380 (v01 PmRef CpuPm 00003000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1149MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0225a000, 0x0225afff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff]
[ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007f58ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f58ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f58ffff]
[ 0.000000] On node 0 totalpages: 521517
[ 0.000000] DMA zone: 40 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 2180 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 294290 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x7f800000-0x7fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519297
[ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=801
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f590)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2045852K/2086068K available (12416K kernel code, 988K rwdata, 3876K rodata, 768K init, 676K bss, 40216K reserved, 0K cma-reserved, 1177160K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc20e5000 - 0xc21a5000 ( 768 kB)
.data : 0xc1c20691 - 0xc20e3120 (4874 kB)
.text : 0xc1000000 - 0xc1c20691 (12417 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5c24000 soft=f5c26000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.165 MHz processor
[ 0.002001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.33 BogoMIPS (lpj=1596165)
[ 0.002163] pid_max: default: 32768 minimum: 301
[ 0.002252] ACPI: Core revision 20160422
[ 0.006285] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.006479] Security Framework initialized
[ 0.006563] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006648] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.007071] mce: CPU supports 6 MCE banks
[ 0.007156] CPU0: Thermal monitoring enabled (TM2)
[ 0.007239] process: using mwait in idle threads
[ 0.007324] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.007405] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.007486] CPU: Genuine Intel(R) CPU 2140 @ 1.60GHz (family: 0x6, model: 0xf, stepping: 0x2)
[ 0.008006] ftrace: allocating 40601 entries in 80 pages
[ 0.025092] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.025255] core: PEBS disabled due to CPU errata
[ 0.025334] ... version: 2
[ 0.025410] ... bit width: 40
[ 0.025485] ... generic registers: 2
[ 0.025561] ... value mask: 000000ffffffffff
[ 0.025641] ... max period: 000000007fffffff
[ 0.025720] ... fixed-purpose events: 3
[ 0.026004] ... event mask: 0000000700000003
[ 0.026274] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.026724] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.037000] devtmpfs: initialized
[ 0.037000] PM: Registering ACPI NVS region [mem 0x7f590000-0x7f5e2fff] (339968 bytes)
[ 0.037000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.037000] xor: measuring software checksum speed
[ 0.047002] pIII_sse : 7388.000 MB/sec
[ 0.057002] prefetch64-sse: 8864.000 MB/sec
[ 0.057079] xor: using function: prefetch64-sse (8864.000 MB/sec)
[ 0.057172] atomic64_test: passed for i586+ platform with CX8 and with SSE
[ 0.057254] pinctrl core: initialized pinctrl subsystem
[ 0.057566] NET: Registered protocol family 16
[ 0.057854] cpuidle: using governor ladder
[ 0.057931] cpuidle: using governor menu
[ 0.058134] ACPI: bus type PCI registered
[ 0.058211] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.058355] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.058490] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.058572] PCI: Using MMCONFIG for extended config space
[ 0.058650] PCI: Using configuration type 1 for base access
[ 0.083006] raid6: mmxx1 gen() 2140 MB/s
[ 0.100019] raid6: mmxx2 gen() 2457 MB/s
[ 0.117039] raid6: sse1x1 gen() 1453 MB/s
[ 0.135034] raid6: sse1x2 gen() 1882 MB/s
[ 0.152013] raid6: sse2x1 gen() 2699 MB/s
[ 0.169003] raid6: sse2x1 xor() 2941 MB/s
[ 0.186017] raid6: sse2x2 gen() 3144 MB/s
[ 0.203001] raid6: sse2x2 xor() 3349 MB/s
[ 0.203078] raid6: using algorithm sse2x2 gen() 3144 MB/s
[ 0.203156] raid6: .... xor() 3349 MB/s, rmw enabled
[ 0.203234] raid6: using ssse3x1 recovery algorithm
[ 0.203363] ACPI: Added _OSI(Module Device)
[ 0.203440] ACPI: Added _OSI(Processor Device)
[ 0.203516] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.203594] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.207083] ACPI: Dynamic OEM Table Load:
[ 0.207208] ACPI: SSDT 0x00000000F5D4FC00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.207894] ACPI: Interpreter enabled
[ 0.208003] ACPI: (supports S0 S3 S4 S5)
[ 0.208078] ACPI: Using IOAPIC for interrupt routing
[ 0.208189] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.213211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.213300] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.213435] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.213571] acpi PNP0A08:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.213574] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.213576] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.213578] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.213580] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.213583] acpi PNP0A08:00: host bridge window [mem 0x7f600000-0xfebfffff window] (ignored)
[ 0.213585] PCI: root bus 00: using default resources
[ 0.213826] PCI host bridge to bus 0000:00
[ 0.213905] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.213988] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.214004] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.214093] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.214230] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.214279] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.214381] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[ 0.214393] pci 0000:00:02.0: reg 0x10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.214399] pci 0000:00:02.0: reg 0x14: [io 0xff00-0xff07]
[ 0.214405] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.214411] pci 0000:00:02.0: reg 0x1c: [mem 0xfde00000-0xfdefffff]
[ 0.214564] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.214607] pci 0000:00:1a.0: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.214703] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.214837] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.214879] pci 0000:00:1a.1: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.215054] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.215188] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.215230] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.215326] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.215465] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.215484] pci 0000:00:1a.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.215571] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.215634] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.215769] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.215787] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.215861] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.215926] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.216057] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.216099] pci 0000:00:1d.0: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.216198] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.216332] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.216374] pci 0000:00:1d.1: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.216472] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.216606] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.216649] pci 0000:00:1d.2: reg 0x20: [io 0xf900-0xf91f]
[ 0.216745] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.216882] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.216901] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.216988] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.217062] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.217195] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.217301] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.217436] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.217518] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.217651] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.217737] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.217867] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[ 0.218124] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[ 0.218139] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.218147] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.218156] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.218164] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.218172] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f]
[ 0.218180] pci 0000:00:1f.2: reg 0x24: [io 0xf300-0xf30f]
[ 0.218311] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.218327] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.218349] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.218469] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[ 0.218484] pci 0000:00:1f.5: reg 0x10: [io 0xf100-0xf107]
[ 0.218492] pci 0000:00:1f.5: reg 0x14: [io 0xf000-0xf003]
[ 0.218500] pci 0000:00:1f.5: reg 0x18: [io 0xef00-0xef07]
[ 0.218509] pci 0000:00:1f.5: reg 0x1c: [io 0xee00-0xee03]
[ 0.218517] pci 0000:00:1f.5: reg 0x20: [io 0xed00-0xed0f]
[ 0.218525] pci 0000:00:1f.5: reg 0x24: [io 0xec00-0xec0f]
[ 0.218691] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.218773] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.218776] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.218780] pci 0000:00:01.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.218829] pci 0000:02:00.0: [11c1:5811] type 00 class 0x0c0010
[ 0.218846] pci 0000:02:00.0: reg 0x10: [mem 0xfddff000-0xfddfffff]
[ 0.218925] pci 0000:02:00.0: supports D1 D2
[ 0.218928] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.219025] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.219110] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.219114] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.219120] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.219122] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.219125] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.219136] pci_bus 0000:00: on NUMA node 0
[ 0.219763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.220160] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.220649] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.221073] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.221474] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.221963] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.222349] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.222749] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.223201] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.223427] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.223509] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.223640] vgaarb: loaded
[ 0.223712] vgaarb: bridge control possible 0000:00:02.0
[ 0.223891] SCSI subsystem initialized
[ 0.224036] libata version 3.00 loaded.
[ 0.224042] ACPI: bus type USB registered
[ 0.224156] usbcore: registered new interface driver usbfs
[ 0.224250] usbcore: registered new interface driver hub
[ 0.224342] usbcore: registered new device driver usb
[ 0.224514] PCI: Using ACPI for IRQ routing
[ 0.230977] PCI: pci_cache_line_size set to 64 bytes
[ 0.231027] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.231030] e820: reserve RAM buffer [mem 0x7f590000-0x7fffffff]
[ 0.231340] clocksource: Switched to clocksource refined-jiffies
[ 0.247236] VFS: Disk quotas dquot_6.6.0
[ 0.247344] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.247526] pnp: PnP ACPI init
[ 0.247827] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.247912] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.247994] system 00:00: [io 0x0290-0x0297] has been reserved
[ 0.248083] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.248169] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248275] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.248481] system 00:02: [io 0x0400-0x04bf] could not be reserved
[ 0.248567] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248824] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.248912] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249049] system 00:04: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.249135] system 00:04: [mem 0x7f600000-0x7f6fffff] could not be reserved
[ 0.249221] system 00:04: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.249304] system 00:04: [mem 0x7f590000-0x7f5fffff] could not be reserved
[ 0.249389] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.249474] system 00:04: [mem 0x00100000-0x7f58ffff] could not be reserved
[ 0.249558] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.249643] system 00:04: [mem 0xfed14000-0xfed1dfff] has been reserved
[ 0.249726] system 00:04: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.249810] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.249894] system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.249978] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.250001] system 00:04: [mem 0x000e0000-0x000effff] has been reserved
[ 0.250085] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.250094] pnp: PnP ACPI: found 5 devices
[ 0.286812] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.286948] clocksource: Switched to clocksource acpi_pm
[ 0.286948] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.286948] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.286948] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.286948] pci 0000:00:01.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.286948] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.286948] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.286948] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.286948] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.286948] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.286948] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.286948] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.286948] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.286948] pci_bus 0000:01: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.286948] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.286948] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.286948] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.286948] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.286948] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.286948] NET: Registered protocol family 2
[ 0.287295] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287399] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287499] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.287609] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.287695] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.287823] NET: Registered protocol family 1
[ 0.287989] RPC: Registered named UNIX socket transport module.
[ 0.288084] RPC: Registered udp transport module.
[ 0.288162] RPC: Registered tcp transport module.
[ 0.288238] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288336] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.289683] PCI: CLS 64 bytes, default 64
[ 0.290323] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.290423] audit: initializing netlink subsys (disabled)
[ 0.290517] audit: type=2000 audit(1483910633.289:1): initialized
[ 0.290806] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.294307] NFS: Registering the id_resolver key type
[ 0.294396] Key type id_resolver registered
[ 0.294472] Key type id_legacy registered
[ 0.294552] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.294864] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.295040] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.295229] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.298784] SGI XFS with ACLs, security attributes, no debug enabled
[ 0.299485] ocfs2: Registered cluster interface o2cb
[ 0.299627] OCFS2 User DLM kernel interface loaded
[ 0.301762] jitterentropy: Initialization failed with host not compliant with requirements: 2
[ 0.301920] async_tx: api initialized (async)
[ 0.302023] bounce: pool size: 64 pages
[ 0.302114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.302275] io scheduler noop registered
[ 0.302352] io scheduler deadline registered
[ 0.302476] io scheduler cfq registered (default)
[ 0.302988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.303093] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.303194] intel_idle: does not run on family 6 model 15
[ 0.303277] GHES: HEST is not enabled!
[ 0.305015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.305629] hpet_acpi_add: no address or irqs in _CRS
[ 0.309503] brd: module loaded
[ 0.309584] HP CISS Driver (v 3.6.26)
[ 0.309943] fnic: Cisco FCoE HBA Driver, ver 1.6.0.21
[ 0.310065] fnic: Successfully Initialized Trace Buffer
[ 0.310244] fnic: Successfully Initialized FC_CTLR Trace Buffer
[ 0.310555] Adaptec aacraid driver 1.2-1[41066]-ms
[ 0.310655] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 0.310949] scsi: <fdomain> Detection failed (no card)
[ 0.311067] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
[ 0.311212] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0.
[ 0.311292] Copyright(c) 2004-2016 Emulex. All rights reserved.
[ 0.311439] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0
[ 0.311608] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 0.311762] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 0.311862] megasas: 06.811.02.00-rc1
[ 0.311963] mpt3sas version 13.100.00.00 loaded
[ 0.312132] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 0.312255] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 0.312351] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 0.312492] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 0.312634] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
[ 0.312779] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[ 0.312873] stex: Promise SuperTrak EX Driver version: 5.00.0000.01
[ 0.313055] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 0.313412] ata_piix 0000:00:1f.2: version 2.13
[ 0.313542] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.314548] scsi host0: ata_piix
[ 0.314729] scsi host1: ata_piix
[ 0.314861] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[ 0.316013] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[ 0.316209] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.316885] scsi host2: ata_piix
[ 0.317091] scsi host3: ata_piix
[ 0.317225] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[ 0.317311] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[ 0.318548] scsi host4: pata_legacy
[ 0.318681] ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 0.640514] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.792053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.794468] ata3.00: ATAPI: HL-DT-STDVD+-RW GSA-H31N, B109, max UDMA/100
[ 0.799108] ata3.00: configured for UDMA/100
[ 1.080072] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.080171] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.080377] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.080469] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.080559] ata2.01: link offline, clearing class 3 to NONE
[ 1.099197] ata1.00: LPM support broken, forcing max_power
[ 1.100693] ata1.00: ATA-6: WDC WD2000JD-22HBB0, 08.02D08, max UDMA/133
[ 1.100782] ata1.00: 390721968 sectors, multi 16: LBA48
[ 1.101269] ata2.00: ATAPI: HL-DT-ST CD-RW/DVD-ROM GCC-H10N, C103, max UDMA/100
[ 1.122207] ata1.00: LPM support broken, forcing max_power
[ 1.123697] ata1.00: configured for UDMA/133
[ 1.124292] ata2.00: configured for UDMA/100
[ 1.312021] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[ 1.312112] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns
[ 2.320040] clocksource: Switched to clocksource tsc
[ 3.360052] floppy0: no floppy controllers found
[ 3.360144] work still pending
[ 3.360549] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JD-22H 2D08 PQ: 0 ANSI: 5
[ 3.360997] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 3.361182] sd 0:0:0:0: [sda] Write Protect is off
[ 3.361263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.361285] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.362537] scsi 1:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCCH10N C103 PQ: 0 ANSI: 5
[ 3.385021] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.385163] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.385414] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.387364] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H31N B109 PQ: 0 ANSI: 5
[ 3.399671] sda: sda1 sda2
[ 3.400169] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.402940] sr 2:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.403246] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 3.403830] scsi host5: pata_legacy
[ 3.403964] ata6: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 3.560302] Fusion MPT base driver 3.04.20
[ 3.560378] Copyright (c) 1999-2008 LSI Corporation
[ 3.560460] Fusion MPT SPI Host driver 3.04.20
[ 3.560568] Fusion MPT FC Host driver 3.04.20
[ 3.560666] Fusion MPT SAS Host driver 3.04.20
[ 3.560764] Fusion MPT misc device (ioctl) driver 3.04.20
[ 3.560882] mptctl: Registered with Fusion MPT base driver
[ 3.560961] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 3.561046] Fusion MPT LAN driver 3.04.20
[ 3.561213] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.561692] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.561776] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.562015] mousedev: PS/2 mouse device common for all mice
[ 3.562159] rtc_cmos 00:01: RTC can wake from S4
[ 3.562357] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.562458] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
[ 3.562548] md: linear personality registered for level -1
[ 3.562628] md: raid0 personality registered for level 0
[ 3.562708] md: raid1 personality registered for level 1
[ 3.562787] md: raid10 personality registered for level 10
[ 3.562917] md: raid6 personality registered for level 6
[ 3.562997] md: raid5 personality registered for level 5
[ 3.563081] md: raid4 personality registered for level 4
[ 3.563159] md: multipath personality registered for level -4
[ 3.563299] device-mapper: uevent: version 1.0.3
[ 3.563463] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 3.563690] input: Speakup as /devices/virtual/input/input1
[ 3.563843] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 3.563940] speakup 3.1.6: initialized
[ 3.564021] synth name on entry is: (null)
[ 3.564288] Initializing XFRM netlink socket
[ 3.564371] NET: Registered protocol family 17
[ 3.564491] 9pnet: Installing 9P2000 support
[ 3.564585] Key type dns_resolver registered
[ 3.564920] microcode: sig=0x6f2, pf=0x1, revision=0x56
[ 3.565041] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.565180] Using IPI Shortcut mode
[ 3.565384] registered taskstats version 1
[ 3.565818] Btrfs loaded, crc32c=crc32c-generic
[ 3.566161] Key type encrypted registered
[ 3.676128] md: Waiting for all devices to be available before autodetect
[ 3.676232] md: If you don't use raid, use raid=noautodetect
[ 3.676509] md: Autodetecting RAID arrays.
[ 3.676587] md: Scanned 0 and added 0 devices.
[ 3.676664] md: autorun ...
[ 3.676738] md: ... autorun DONE.
[ 3.711465] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 3.753554] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.753701] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 3.784082] devtmpfs: mounted
[ 3.784420] Freeing unused kernel memory: 768K (c20e5000 - c21a5000)
[ 3.784530] Write protecting the kernel text: 12420k
[ 3.784669] Write protecting the kernel read-only data: 3884k
[ 4.138428] random: fast init done
[ 4.609222] random: crng init done
[ 4.792614] loop: module loaded
[ 5.643586] udevd[498]: starting eudev-3.1.5
[ 6.306498] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 6.306641] ACPI: Power Button [PWRB]
[ 6.306797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.306927] ACPI: Power Button [PWRF]
[ 6.326437] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.341530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.342129] ehci-pci: EHCI PCI platform driver
[ 6.342393] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 6.342725] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 6.342870] ehci-pci 0000:00:1a.7: debug port 1
[ 6.346842] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 6.350018] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 6.357270] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 6.357421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.357507] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.357638] usb usb1: Product: EHCI Host Controller
[ 6.357717] usb usb1: Manufacturer: Linux 4.8.15 ehci_hcd
[ 6.357799] usb usb1: SerialNumber: 0000:00:1a.7
[ 6.358056] hub 1-0:1.0: USB hub found
[ 6.358141] hub 1-0:1.0: 6 ports detected
[ 6.358539] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 6.358682] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 6.358824] ehci-pci 0000:00:1d.7: debug port 1
[ 6.362801] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 6.367418] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 6.374014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.374170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.374257] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.374386] usb usb2: Product: EHCI Host Controller
[ 6.374465] usb usb2: Manufacturer: Linux 4.8.15 ehci_hcd
[ 6.374546] usb usb2: SerialNumber: 0000:00:1d.7
[ 6.374796] hub 2-0:1.0: USB hub found
[ 6.374881] hub 2-0:1.0: 6 ports detected
[ 6.429523] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.429767] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 6.430084] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 6.430248] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[ 6.430394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.430480] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.430610] usb usb3: Product: UHCI Host Controller
[ 6.430689] usb usb3: Manufacturer: Linux 4.8.15 uhci_hcd
[ 6.430769] usb usb3: SerialNumber: 0000:00:1a.0
[ 6.430999] hub 3-0:1.0: USB hub found
[ 6.431090] hub 3-0:1.0: 2 ports detected
[ 6.431401] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 6.431537] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 6.431695] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[ 6.431823] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.431908] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.432046] usb usb4: Product: UHCI Host Controller
[ 6.432125] usb usb4: Manufacturer: Linux 4.8.15 uhci_hcd
[ 6.432206] usb usb4: SerialNumber: 0000:00:1a.1
[ 6.432424] hub 4-0:1.0: USB hub found
[ 6.432507] hub 4-0:1.0: 2 ports detected
[ 6.437217] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 6.437444] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 6.437600] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[ 6.437731] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.437817] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.437946] usb usb5: Product: UHCI Host Controller
[ 6.438037] usb usb5: Manufacturer: Linux 4.8.15 uhci_hcd
[ 6.438118] usb usb5: SerialNumber: 0000:00:1a.2
[ 6.438343] hub 5-0:1.0: USB hub found
[ 6.438428] hub 5-0:1.0: 2 ports detected
[ 6.438703] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.438838] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 6.438991] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[ 6.439126] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.439211] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.439341] usb usb6: Product: UHCI Host Controller
[ 6.439422] usb usb6: Manufacturer: Linux 4.8.15 uhci_hcd
[ 6.439501] usb usb6: SerialNumber: 0000:00:1d.0
[ 6.442589] hub 6-0:1.0: USB hub found
[ 6.442676] hub 6-0:1.0: 2 ports detected
[ 6.442988] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.443146] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 6.443304] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[ 6.443435] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.443522] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.443650] usb usb7: Product: UHCI Host Controller
[ 6.443729] usb usb7: Manufacturer: Linux 4.8.15 uhci_hcd
[ 6.443811] usb usb7: SerialNumber: 0000:00:1d.1
[ 6.444037] hub 7-0:1.0: USB hub found
[ 6.444121] hub 7-0:1.0: 2 ports detected
[ 6.444391] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.444523] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 6.444677] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[ 6.448042] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.448130] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.448259] usb usb8: Product: UHCI Host Controller
[ 6.448338] usb usb8: Manufacturer: Linux 4.8.15 uhci_hcd
[ 6.448420] usb usb8: SerialNumber: 0000:00:1d.2
[ 6.448646] hub 8-0:1.0: USB hub found
[ 6.448732] hub 8-0:1.0: 2 ports detected
[ 6.513695] Linux agpgart interface v0.103
[ 6.667387] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 6.688016] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 6.724016] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 6.809190] usb 2-3: New USB device found, idVendor=05ac, idProduct=12a8
[ 6.809283] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.809370] usb 2-3: Product: iPhone
[ 6.809448] usb 2-3: Manufacturer: Apple Inc.
[ 6.809528] usb 2-3: SerialNumber: 8ade58d089ed814752ec061af5a1d250b1076f9f
[ 6.819943] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20160422/utaddress-255)
[ 6.820210] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.820353] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20160422/utaddress-255)
[ 6.820593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.820729] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO) (20160422/utaddress-255)
[ 6.820968] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.821107] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.844520] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608
[ 6.844614] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.844700] usb 1-4: Product: USB2.0 Hub
[ 6.845205] hub 1-4:1.0: USB hub found
[ 6.845804] hub 1-4:1.0: 4 ports detected
[ 6.880020] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 6.914015] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 6.952234] [drm] Initialized drm 1.1.0 20060810
[ 7.034939] usb 2-4: New USB device found, idVendor=0781, idProduct=5530
[ 7.035040] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.035127] usb 2-4: Product: Cruzer
[ 7.035204] usb 2-4: Manufacturer: SanDisk
[ 7.035283] usb 2-4: SerialNumber: 20053045130CBF21B219
[ 7.049040] usb 4-1: New USB device found, idVendor=1c4f, idProduct=0016
[ 7.049133] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.049219] usb 4-1: Product: USB Keyboard
[ 7.049296] usb 4-1: Manufacturer: SIGMACHIP
[ 7.120023] usb 1-4.2: new low-speed USB device number 4 using ehci-pci
[ 7.173019] pci 0000:00:00.0: Intel G33 Chipset
[ 7.173121] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 7.173402] pci 0000:00:00.0: detected 8192K stolen memory
[ 7.173568] [drm] Memory usable by graphics device = 512M
[ 7.173651] [drm] Replacing VGA console driver
[ 7.174505] Console: switching to colour dummy device 80x25
[ 7.183053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.183068] [drm] Driver supports precise vblank timestamp query.
[ 7.183330] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.185038] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.185048] ACPI: Thermal Zone [THRM] (40 C)
[ 7.187074] [drm] RC6 disabled, disabling runtime PM support
[ 7.187101] [drm] initialized overlay support
[ 7.187449] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[ 7.203021] usb 1-4.2: New USB device found, idVendor=093a, idProduct=2510
[ 7.203037] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.203049] usb 1-4.2: Product: USB Optical Mouse
[ 7.203057] usb 1-4.2: Manufacturer: PixArt
[ 7.253043] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 62
[ 7.253061] Raw EDID:
[ 7.253068] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
[ 7.253076] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
[ 7.253084] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
[ 7.253091] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 7.253098] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
[ 7.253106] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
[ 7.253113] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
[ 7.253121] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
[ 7.268019] usb 1-4.3: new high-speed USB device number 5 using ehci-pci
[ 7.287049] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 62
[ 7.287067] Raw EDID:
[ 7.287074] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
[ 7.287082] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
[ 7.287090] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
[ 7.287097] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 7.287105] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
[ 7.287112] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
[ 7.287120] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
[ 7.287127] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
[ 7.305052] firewire_ohci 0000:02:00.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 7.321041] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 62
[ 7.321059] Raw EDID:
[ 7.321066] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
[ 7.321074] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
[ 7.321082] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
[ 7.321089] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 7.321097] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
[ 7.321104] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
[ 7.321112] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
[ 7.321119] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
[ 7.335820] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 7.349149] usb 1-4.3: New USB device found, idVendor=14cd, idProduct=125d
[ 7.349165] usb 1-4.3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 7.349178] usb 1-4.3: Product: Mass Storage Device
[ 7.349186] usb 1-4.3: Manufacturer: Generic
[ 7.349193] usb 1-4.3: SerialNumber: 125D20140310
[ 7.356045] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 62
[ 7.356063] Raw EDID:
[ 7.356070] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
[ 7.356078] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
[ 7.356086] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
[ 7.356093] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
[ 7.356101] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
[ 7.356108] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
[ 7.356115] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
[ 7.356123] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
[ 7.356134] i915 0000:00:02.0: VGA-1: EDID block 0 invalid.
[ 7.444293] usb 1-4.4: new high-speed USB device number 6 using ehci-pci
[ 7.465881] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 7.465902] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.465915] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.465928] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 7.465936] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 7.465945] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 7.465954] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 7.465963] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 7.526432] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.526499] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.526555] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.526613] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.526671] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.526728] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.526786] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.526842] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.539110] intel_powerclamp: No package C-state available
[ 7.542272] usb 1-4.4: New USB device found, idVendor=2001, idProduct=3c19
[ 7.542289] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.542301] usb 1-4.4: Product: 11n Adapter
[ 7.542309] usb 1-4.4: Manufacturer: Ralink
[ 7.542316] usb 1-4.4: SerialNumber: 1.0
[ 7.604571] fbcon: inteldrmfb (fb0) is primary device
[ 7.611237] coretemp coretemp.0: Using relative temperature scale!
[ 7.661465] Console: switching to colour frame buffer device 128x48
[ 7.687151] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.812012] firewire_core 0000:02:00.0: created device fw0: GUID 0000d100810bbde9, S400
[ 8.389343] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.546229] dell_smm_hwmon: unable to get SMM Dell signature
[ 9.450307] i2c /dev entries driver
[ 10.397642] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 10.397804] scsi host6: usb-storage 2-4:1.0
[ 10.397981] usb-storage 1-4.3:1.0: USB Mass Storage device detected
[ 10.398252] scsi host7: usb-storage 1-4.3:1.0
[ 10.398407] usbcore: registered new interface driver usb-storage
[ 10.415843] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.428977] usbcore: registered new interface driver uas
[ 10.496533] usbcore: registered new interface driver usbhid
[ 10.496606] usbhid: USB HID core driver
[ 10.520067] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:1C4F:0016.0001/input/input14
[ 10.575560] hid-generic 0003:1C4F:0016.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.1-1/input0
[ 10.586205] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:1C4F:0016.0002/input/input15
[ 10.638278] hid-generic 0003:1C4F:0016.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.1-1/input1
[ 10.645125] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/0003:093A:2510.0003/input/input16
[ 10.651361] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.7-4.2/input0
[ 11.196043] usb 1-4.4: reset high-speed USB device number 6 using ehci-pci
[ 11.289651] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected
[ 11.323029] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 11.326765] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.327761] usbcore: registered new interface driver rt2800usb
[ 11.424713] scsi 6:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 2
[ 11.427959] scsi 7:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
[ 11.436708] sd 6:0:0:0: [sdc] 7837696 512-byte logical blocks: (4.01 GB/3.74 GiB)
[ 11.440915] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 11.448257] sd 6:0:0:0: [sdc] Write Protect is off
[ 11.451187] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 11.452325] sd 6:0:0:0: [sdc] No Caching mode page found
[ 11.455269] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 11.466964] sdc: sdc1
[ 11.476832] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 12.110503] Adding 5471228k swap on /dev/sda2. Priority:1 extents:1 across:5471228k
[ 12.189209] fuse init (API version 7.25)
[ 13.210310] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 21.522536] intel_powerclamp: No package C-state available
[ 21.665166] dell_smm_hwmon: unable to get SMM Dell signature
[ 26.984205] NET: Registered protocol family 10
[ 28.124215] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 28.202782] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 45.324882] usb 2-3: USB disconnect, device number 2
[ 51.777036] usb 2-3: new high-speed USB device number 4 using ehci-pci
[ 51.898222] usb 2-3: New USB device found, idVendor=05ac, idProduct=12a8
[ 51.898226] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 51.898229] usb 2-3: Product: iPhone
[ 51.898232] usb 2-3: Manufacturer: Apple Inc.
[ 51.898235] usb 2-3: SerialNumber: 8ade58d089ed814752ec061af5a1d250b1076f9f
[ 52.043469] ipheth 2-3:4.2: Apple iPhone USB Ethernet device attached
[ 52.044772] usbcore: registered new interface driver ipheth
[ 52.046499] ipheth 2-3:4.2 eth125: renamed from eth0
[ 52.046825] ipheth 2-3:4.2 eth1: renamed from eth125
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: DRM i915
2017-01-08 22:01 DRM i915 Nathaniel Russell
@ 2017-01-08 22:16 ` Ilia Mirkin
0 siblings, 0 replies; 3+ messages in thread
From: Ilia Mirkin @ 2017-01-08 22:16 UTC (permalink / raw)
To: Nathaniel Russell; +Cc: linux-kernel
On Sun, Jan 8, 2017 at 5:01 PM, Nathaniel Russell
<naterussell83@gmail.com> wrote:
> Any help figuring this out would be greatly appreciated.
> Linux version 4.8.15 (root@reddog) (gcc version 5.4.0 (GCC) ) #1 Sun Dec 18
> 22:48:37 CST 2016
>
>
>
>
> pci 0000:00:00.0: Intel G33 Chipset
> [ 7.173121] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K
> mappable
> [ 7.173402] pci 0000:00:00.0: detected 8192K stolen memory
> [ 7.173568] [drm] Memory usable by graphics device = 512M
> [ 7.173651] [drm] Replacing VGA console driver
> [ 7.174505] Console: switching to colour dummy device 80x25
> [ 7.183053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 7.183068] [drm] Driver supports precise vblank timestamp query.
> [ 7.183330] vgaarb: device changed decodes:
> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 7.187074] [drm] RC6 disabled, disabling runtime PM support
> [ 7.187101] [drm] initialized overlay support
> [ 7.187449] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on
> minor 0
> [ 7.253043] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is
> invalid, remainder is 62
> [ 7.253061] Raw EDID:
> [ 7.253068] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
> [ 7.253076] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
> [ 7.253084] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
> [ 7.253091] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
> [ 7.253098] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
> [ 7.253106] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
> [ 7.253113] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
> [ 7.253121] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
> [ 7.268019] usb 1-4.3: new high-speed USB device number 5 using ehci-pci
> [ 7.287049] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is
> invalid, remainder is 62
> [ 7.287067] Raw EDID:
> [ 7.287074] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
> [ 7.287082] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
> [ 7.287090] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
> [ 7.287097] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
> [ 7.287105] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
> [ 7.287112] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
> [ 7.287120] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
> [ 7.287127] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
> [ 7.305052] firewire_ohci 0000:02:00.0: added OHCI v1.0 device as card 0,
> 8 IR + 8 IT contexts, quirks 0x0
> [ 7.321041] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is
> invalid, remainder is 62
> [ 7.321059] Raw EDID:
> [ 7.321066] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
> [ 7.321074] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
> [ 7.321082] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
> [ 7.321089] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
> [ 7.321097] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
> [ 7.321104] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
> [ 7.321112] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
> [ 7.321119] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
> [ 7.335820] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
> [ 7.349149] usb 1-4.3: New USB device found, idVendor=14cd,
> idProduct=125d
> [ 7.349165] usb 1-4.3: New USB device strings: Mfr=1, Product=3,
> SerialNumber=2
> [ 7.349178] usb 1-4.3: Product: Mass Storage Device
> [ 7.349186] usb 1-4.3: Manufacturer: Generic
> [ 7.349193] usb 1-4.3: SerialNumber: 125D20140310
> [ 7.356045] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is
> invalid, remainder is 62
> [ 7.356063] Raw EDID:
> [ 7.356070] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33
> [ 7.356078] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23
> [ 7.356086] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01
> [ 7.356093] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70
> [ 7.356101] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f
> [ 7.356108] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44
> [ 7.356115] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc
> [ 7.356123] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98
> [ 7.356134] i915 0000:00:02.0: VGA-1: EDID block 0 invalid.
What's the question exactly? Your monitor is returning an EDID with an
invalid checksum, and the kernel is notifying you about this. The full
edid-decode output looks like:
$ ./edid-decode < tmp.edid
Extracted contents:
header: 00 ff ff ff ff ff ff 00
serial number: 10 ac 0b a0 53 4b 55 33 2c 0e
version: 01 03
basic params: 68 22 1b 78 ee
chroma info: ca f6 a3 57 47 9e 23 11 4f 54
established: a5 4b 00
standard: 71 4f 81 80 01 01 01 01 01 01 01 01 01 01 01 01
descriptor 1: 30 2a 00 98 51 00 2a 40 30 70 13 00 52 0e 11 00 00 1e
descriptor 2: 00 00 00 fd 00 38 4b 1f 50 0e 00 0a 20 20 20 20 20 20
descriptor 3: 00 00 00 ff 00 44 35 34 32 38 34 41 55 33 55 4b 53 0a
descriptor 4: 00 00 00 fc 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20
extensions: 00
checksum: 98
Manufacturer: DEL Model a00b Serial Number 861227859
EDID version: 1.3
Analog display, Input voltage level: 0.7/0.7 V
Sync: Separate
Maximum image size: 34 cm x 27 cm
Gamma: 2.20
DPMS levels: Standby Suspend Off
RGB color display
Default (sRGB) color space is primary color space
First detailed timing is preferred timing
Established timings supported:
720x400@70Hz
640x480@60Hz
640x480@75Hz
800x600@60Hz
800x600@75Hz
1024x768@60Hz
1024x768@75Hz
1280x1024@75Hz
Standard timings supported:
1152x864@75Hz
1280x1024@60Hz
Detailed mode: Clock 108.000 MHz, 338 mm x 270 mm
1280 1328 1440 1688 hborder 0
1024 1025 1028 1066 vborder 0
+hsync +vsync
Monitor ranges (GTF): 56-75Hz V, 31-80kHz H, max dotclock 140MHz
Serial number: D54284AU3UKS
Monitor name: DELL
Checksum: 0x98 (should be 0x5a)
EDID block does NOT conform to EDID 1.3!
Detailed block string not properly terminated
EDID block does not conform at all!
Block has broken checksum
Bad year of manufacture
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: DRM 915
@ 2017-01-08 22:34 Nathaniel Russell
2017-01-09 2:32 ` DRM i915 Nathaniel Russell
0 siblings, 1 reply; 3+ messages in thread
From: Nathaniel Russell @ 2017-01-08 22:34 UTC (permalink / raw)
To: linux-kernel
How would i go about fixing that error so that i dont have it anymore.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-01-09 2:34 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-08 22:01 DRM i915 Nathaniel Russell
2017-01-08 22:16 ` Ilia Mirkin
2017-01-08 22:34 DRM 915 Nathaniel Russell
2017-01-09 2:32 ` DRM i915 Nathaniel Russell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).