* ide0=ata66 obsolete, but replaced by what (2.6.10)?
@ 2004-12-26 18:58 Ralf Hildebrandt
2004-12-26 19:06 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 2+ messages in thread
From: Ralf Hildebrandt @ 2004-12-26 18:58 UTC (permalink / raw)
To: Linux Kernel Mailing List
Ever since a few kernels ago, my dmesg output says:
Kernel command line: BOOT_IMAGE=Linux ro root=303 noapic ide0=ata66 video=vesafb:mtrr,ywrap
ide_setup: ide0=ata66 -- OBSOLETE OPTION, WILL BE REMOVED SOON!
OK, but what is it replaced with?
Because later on, dmesg also says:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
NFORCE3-150: chipset revision 165
NFORCE3-150: not 100% native mode: will probe irqs later
NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST94019A, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SD-R6252, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
My question is now:
1) What replaces the boot option "ide0=ata66"?
or
2) How do I get the old bus speed back?
--
Ralf Hildebrandt (i.A. des IT-Zentrum) Ralf.Hildebrandt@charite.de
Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962
IT-Zentrum Standort CBF send no mail to spamtrap@charite.de
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: ide0=ata66 obsolete, but replaced by what (2.6.10)?
2004-12-26 18:58 ide0=ata66 obsolete, but replaced by what (2.6.10)? Ralf Hildebrandt
@ 2004-12-26 19:06 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 2+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2004-12-26 19:06 UTC (permalink / raw)
To: Linux Kernel Mailing List
Hi,
On Sun, 26 Dec 2004 19:58:30 +0100, Ralf Hildebrandt
<Ralf.Hildebrandt@charite.de> wrote:
> Ever since a few kernels ago, my dmesg output says:
>
> Kernel command line: BOOT_IMAGE=Linux ro root=303 noapic ide0=ata66 video=vesafb:mtrr,ywrap
> ide_setup: ide0=ata66 -- OBSOLETE OPTION, WILL BE REMOVED SOON!
>
> OK, but what is it replaced with?
> Because later on, dmesg also says:
>
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
> NFORCE3-150: chipset revision 165
> NFORCE3-150: not 100% native mode: will probe irqs later
> NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
> NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
> ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio
> Probing IDE interface ide0...
> hda: ST94019A, ATA DISK drive
> elevator: using anticipatory as default io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdc: SD-R6252, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 1024KiB
> hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
> hda: cache flushes supported
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
>
> My question is now:
>
> 1) What replaces the boot option "ide0=ata66"?
Nothing ;-), what do you need it for?
> or
> 2) How do I get the old bus speed back?
What bus speed are you talking about?
"idebus=" is still there but you don't need to use it for nVidia chipsets AFAIK.
Bartlomiej
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-12-26 19:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-12-26 18:58 ide0=ata66 obsolete, but replaced by what (2.6.10)? Ralf Hildebrandt
2004-12-26 19:06 ` Bartlomiej Zolnierkiewicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).