linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 2/3] atiixp.c: sb600 ide only has one channel
@ 2007-01-06 12:14 Conke Hu
  2007-01-07  2:14 ` Bartlomiej Zolnierkiewicz
  0 siblings, 1 reply; 3+ messages in thread
From: Conke Hu @ 2007-01-06 12:14 UTC (permalink / raw)
  To: Linux kernel mailing list, Andrew Morton, Greg KH

AMD/ATI SB600 IDE/PATA controller only has one channel.

Signed-off-by: Conke Hu <conke.hu@amd.com>
---------------
--- linux-2.6.20-rc3-git4/drivers/ide/pci/atiixp.c.1	2007-01-06
19:13:55.000000000 +0800
+++ linux-2.6.20-rc3-git4/drivers/ide/pci/atiixp.c.2	2007-01-06
19:19:35.000000000 +0800
@@ -327,7 +327,14 @@ static ide_pci_device_t atiixp_pci_info[
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
 		.bootable	= ON_BOARD,
-	},
+	},{	/* 1 */
+		.name		= "SB600_PATA",
+		.init_hwif	= init_hwif_atiixp,
+		.channels	= 1,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
+ 		.bootable	= ON_BOARD,
+ 	},
 };

 /**
@@ -348,7 +355,7 @@ static struct pci_device_id atiixp_pci_t
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 1},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH 2/3] atiixp.c: sb600 ide only has one channel
  2007-01-06 12:14 [PATCH 2/3] atiixp.c: sb600 ide only has one channel Conke Hu
@ 2007-01-07  2:14 ` Bartlomiej Zolnierkiewicz
  2007-01-09 12:48   ` Conke Hu
  0 siblings, 1 reply; 3+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2007-01-07  2:14 UTC (permalink / raw)
  To: Conke Hu; +Cc: Linux kernel mailing list, Andrew Morton, Greg KH

On 1/6/07, Conke Hu <conke.hu@gmail.com> wrote:
> AMD/ATI SB600 IDE/PATA controller only has one channel.
>
> Signed-off-by: Conke Hu <conke.hu@amd.com>

Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

[ but the patch is line wrapped ]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH 2/3] atiixp.c: sb600 ide only has one channel
  2007-01-07  2:14 ` Bartlomiej Zolnierkiewicz
@ 2007-01-09 12:48   ` Conke Hu
  0 siblings, 0 replies; 3+ messages in thread
From: Conke Hu @ 2007-01-09 12:48 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: Linux kernel mailing list, Andrew Morton, Greg KH, linux-ide

On 1/7/07, Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote:
> On 1/6/07, Conke Hu <conke.hu@gmail.com> wrote:
> > AMD/ATI SB600 IDE/PATA controller only has one channel.
> >
> > Signed-off-by: Conke Hu <conke.hu@amd.com>
>
> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>
> [ but the patch is line wrapped ]
>

Hi Bart,
    Thank you!
    I've re-created the patch based on 2.6.20-rc4, pls see below.
    I've sent out 3 patches for the same file atiixp.c, pls apply it
after the [patch 1/3] :)
-------------------
--- linux-2.6.20-rc4/drivers/ide/pci/atiixp.c.2	2007-01-09
15:21:29.000000000 +0800
+++ linux-2.6.20-rc4/drivers/ide/pci/atiixp.c	2007-01-09
15:25:15.000000000 +0800
@@ -328,7 +328,14 @@ static ide_pci_device_t atiixp_pci_info[
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
 		.bootable	= ON_BOARD,
-	},
+	},{	/* 1 */
+		.name		= "SB600_PATA",
+		.init_hwif	= init_hwif_atiixp,
+		.channels	= 1,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
+ 		.bootable	= ON_BOARD,
+ 	},
 };

 /**
@@ -349,7 +356,7 @@ static struct pci_device_id atiixp_pci_t
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 1},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2007-01-09 12:48 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-01-06 12:14 [PATCH 2/3] atiixp.c: sb600 ide only has one channel Conke Hu
2007-01-07  2:14 ` Bartlomiej Zolnierkiewicz
2007-01-09 12:48   ` Conke Hu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).