linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Mack <daniel@zonque.org>
To: Robert Jarzmik <robert.jarzmik@free.fr>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	dmaengine@vger.kernel.org, linux-media@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org,
	netdev@vger.kernel.org, alsa-devel@alsa-project.org
Subject: Re: [PATCH v2 08/13] ASoC: pxa: remove the dmaengine compat need
Date: Fri, 25 May 2018 10:35:37 +0200	[thread overview]
Message-ID: <5bc2aa06-7939-1ca4-6704-30f307edcda4@zonque.org> (raw)
In-Reply-To: <20180524070703.11901-9-robert.jarzmik@free.fr>

On Thursday, May 24, 2018 09:06 AM, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
> 
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Reviewed-by: Daniel Mack <daniel@zonque.org>

> ---
>   sound/arm/pxa2xx-ac97.c     | 14 ++------------
>   sound/arm/pxa2xx-pcm-lib.c  |  6 +++---
>   sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
>   sound/soc/pxa/pxa2xx-i2s.c  |  6 ++----
>   4 files changed, 12 insertions(+), 46 deletions(-)
> 
> diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
> index 4bc244c40f80..236a63cdaf9f 100644
> --- a/sound/arm/pxa2xx-ac97.c
> +++ b/sound/arm/pxa2xx-ac97.c
> @@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
>   	.reset	= pxa2xx_ac97_legacy_reset,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 12,
> -};
> -
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_out",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_out_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 11,
>   };
>   
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_in",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_in_req,
>   };
>   
>   static struct snd_pcm *pxa2xx_ac97_pcm;
> diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
> index e8da3b8ee721..dcbe7ecc1835 100644
> --- a/sound/arm/pxa2xx-pcm-lib.c
> +++ b/sound/arm/pxa2xx-pcm-lib.c
> @@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
>   	if (ret < 0)
>   		return ret;
>   
> -	return snd_dmaengine_pcm_open_request_chan(substream,
> -					pxad_filter_fn,
> -					dma_params->filter_data);
> +	return snd_dmaengine_pcm_open(
> +		substream, dma_request_slave_channel(rtd->cpu_dai->dev,
> +						     dma_params->chan_name));
>   }
>   EXPORT_SYMBOL(__pxa2xx_pcm_open);
>   
> diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
> index 803818aabee9..1b41c0f2a8fb 100644
> --- a/sound/soc/pxa/pxa2xx-ac97.c
> +++ b/sound/soc/pxa/pxa2xx-ac97.c
> @@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
>   	.reset	= pxa2xx_ac97_cold_reset,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 11,
> -};
> -
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_in",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_stereo_in_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 12,
>   };
>   
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_out",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_stereo_out_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 10,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
>   	.addr		= __PREG(MODR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mono_out",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_out_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 9,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
>   	.addr		= __PREG(MODR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mono_in",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_in_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 8,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
>   	.addr		= __PREG(MCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mic_mono",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mic_mono_req,
>   };
>   
>   static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
> diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
> index 3fb60baf6eab..e7184de0de04 100644
> --- a/sound/soc/pxa/pxa2xx-i2s.c
> +++ b/sound/soc/pxa/pxa2xx-i2s.c
> @@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
>   static struct clk *clk_i2s;
>   static int clk_ena = 0;
>   
> -static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
>   static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
>   	.addr		= __PREG(SADR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "tx",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_i2s_pcm_stereo_out_req,
>   };
>   
> -static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
>   static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
>   	.addr		= __PREG(SADR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "rx",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_i2s_pcm_stereo_in_req,
>   };
>   
>   static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
> 

  parent reply	other threads:[~2018-05-25  8:35 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
2018-05-24  7:06 ` [PATCH v2 01/13] dmaengine: pxa: use a dma slave map Robert Jarzmik
2018-06-25 13:15   ` Applied "dmaengine: pxa: use a dma slave map" to the asoc tree Mark Brown
2018-05-24  7:06 ` [PATCH v2 02/13] ARM: pxa: add dma slave map Robert Jarzmik
2018-05-24 18:11   ` Robert Jarzmik
2018-05-24  7:06 ` [PATCH v2 03/13] mmc: pxamci: remove the dmaengine compat need Robert Jarzmik
2018-06-25 13:15   ` Applied "mmc: pxamci: remove the dmaengine compat need" to the asoc tree Mark Brown
2018-05-24  7:06 ` [PATCH v2 04/13] media: pxa_camera: remove the dmaengine compat need Robert Jarzmik
2018-06-25 13:15   ` Applied "media: pxa_camera: remove the dmaengine compat need" to the asoc tree Mark Brown
2018-05-24  7:06 ` [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need Robert Jarzmik
2018-05-24  9:30   ` Miquel Raynal
2018-05-24 18:07     ` Robert Jarzmik
2018-05-25  6:56       ` Miquel Raynal
2018-05-24  7:06 ` [PATCH v2 06/13] net: smc911x: " Robert Jarzmik
2018-05-24  7:06 ` [PATCH v2 07/13] net: smc91x: " Robert Jarzmik
2018-05-24  7:06 ` [PATCH v2 08/13] ASoC: pxa: " Robert Jarzmik
2018-05-24 13:58   ` Mark Brown
2018-05-25  8:35   ` Daniel Mack [this message]
2018-06-29 11:07   ` Applied "ASoC: pxa: remove the dmaengine compat need" to the asoc tree Mark Brown
2018-05-24  7:06 ` [PATCH v2 09/13] ata: pata_pxa: remove the dmaengine compat need Robert Jarzmik
2018-06-25 13:15   ` Applied "ata: pata_pxa: remove the dmaengine compat need" to the asoc tree Mark Brown
2018-05-24  7:07 ` [PATCH v2 10/13] dmaengine: pxa: document pxad_param Robert Jarzmik
2018-05-25 10:59   ` Vinod
2018-06-25 13:15   ` Applied "dmaengine: pxa: document pxad_param" to the asoc tree Mark Brown
2018-05-24  7:07 ` [PATCH v2 11/13] dmaengine: pxa: make the filter function internal Robert Jarzmik
2018-05-25 10:59   ` Vinod
2018-05-24  7:07 ` [PATCH v2 12/13] ARM: pxa: remove the DMA IO resources Robert Jarzmik
2018-06-25 13:15   ` Applied "ARM: pxa: remove the DMA IO resources" to the asoc tree Mark Brown
2018-05-24  7:07 ` [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation Robert Jarzmik
2018-05-25  7:56   ` Daniel Mack
2018-06-25 13:15   ` Applied "ARM: pxa: change SSP DMA channels allocation" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5bc2aa06-7939-1ca4-6704-30f307edcda4@zonque.org \
    --to=daniel@zonque.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnd@arndb.de \
    --cc=boris.brezillon@free-electrons.com \
    --cc=broonie@kernel.org \
    --cc=computersforpeace@gmail.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=ezequiel.garcia@free-electrons.com \
    --cc=haojian.zhuang@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=richard@nod.at \
    --cc=robert.jarzmik@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).