* [PATCH v5 1/8] drm/omap: Add ability to check if requested plane modes can be supported
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
@ 2021-09-23 7:06 ` Neil Armstrong
2021-10-12 7:21 ` Tomi Valkeinen
2021-09-23 7:06 ` [PATCH v5 2/8] drm/omap: Add ovl checking funcs to dispc_ops Neil Armstrong
` (8 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Neil Armstrong @ 2021-09-23 7:06 UTC (permalink / raw)
To: tomba
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot,
Neil Armstrong
From: Benoit Parrot <bparrot@ti.com>
We currently assume that an overlay has the same maximum width and
maximum height as the overlay manager. This assumption is incorrect. On
some variants the overlay manager maximum width is twice the maximum
width that the overlay can handle. We need to add the appropriate data
per variant as well as export a helper function to retrieve the data so
check can be made dynamically in omap_plane_atomic_check().
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/omapdrm/dss/dispc.c | 22 ++++++++++++++++++++++
drivers/gpu/drm/omapdrm/dss/dss.h | 2 ++
drivers/gpu/drm/omapdrm/omap_plane.c | 14 ++++++++++++++
3 files changed, 38 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 3c4a4991e45a..bdecec8f4d88 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -92,6 +92,8 @@ struct dispc_features {
u8 mgr_height_start;
u16 mgr_width_max;
u16 mgr_height_max;
+ u16 ovl_width_max;
+ u16 ovl_height_max;
unsigned long max_lcd_pclk;
unsigned long max_tv_pclk;
unsigned int max_downscale;
@@ -2599,6 +2601,12 @@ static int dispc_ovl_calc_scaling(struct dispc_device *dispc,
return 0;
}
+void dispc_ovl_get_max_size(struct dispc_device *dispc, u16 *width, u16 *height)
+{
+ *width = dispc->feat->ovl_width_max;
+ *height = dispc->feat->ovl_height_max;
+}
+
static int dispc_ovl_setup_common(struct dispc_device *dispc,
enum omap_plane_id plane,
enum omap_overlay_caps caps,
@@ -4240,6 +4248,8 @@ static const struct dispc_features omap24xx_dispc_feats = {
.mgr_height_start = 26,
.mgr_width_max = 2048,
.mgr_height_max = 2048,
+ .ovl_width_max = 2048,
+ .ovl_height_max = 2048,
.max_lcd_pclk = 66500000,
.max_downscale = 2,
/*
@@ -4278,6 +4288,8 @@ static const struct dispc_features omap34xx_rev1_0_dispc_feats = {
.mgr_height_start = 26,
.mgr_width_max = 2048,
.mgr_height_max = 2048,
+ .ovl_width_max = 2048,
+ .ovl_height_max = 2048,
.max_lcd_pclk = 173000000,
.max_tv_pclk = 59000000,
.max_downscale = 4,
@@ -4313,6 +4325,8 @@ static const struct dispc_features omap34xx_rev3_0_dispc_feats = {
.mgr_height_start = 26,
.mgr_width_max = 2048,
.mgr_height_max = 2048,
+ .ovl_width_max = 2048,
+ .ovl_height_max = 2048,
.max_lcd_pclk = 173000000,
.max_tv_pclk = 59000000,
.max_downscale = 4,
@@ -4348,6 +4362,8 @@ static const struct dispc_features omap36xx_dispc_feats = {
.mgr_height_start = 26,
.mgr_width_max = 2048,
.mgr_height_max = 2048,
+ .ovl_width_max = 2048,
+ .ovl_height_max = 2048,
.max_lcd_pclk = 173000000,
.max_tv_pclk = 59000000,
.max_downscale = 4,
@@ -4383,6 +4399,8 @@ static const struct dispc_features am43xx_dispc_feats = {
.mgr_height_start = 26,
.mgr_width_max = 2048,
.mgr_height_max = 2048,
+ .ovl_width_max = 2048,
+ .ovl_height_max = 2048,
.max_lcd_pclk = 173000000,
.max_tv_pclk = 59000000,
.max_downscale = 4,
@@ -4418,6 +4436,8 @@ static const struct dispc_features omap44xx_dispc_feats = {
.mgr_height_start = 26,
.mgr_width_max = 2048,
.mgr_height_max = 2048,
+ .ovl_width_max = 2048,
+ .ovl_height_max = 2048,
.max_lcd_pclk = 170000000,
.max_tv_pclk = 185625000,
.max_downscale = 4,
@@ -4457,6 +4477,8 @@ static const struct dispc_features omap54xx_dispc_feats = {
.mgr_height_start = 27,
.mgr_width_max = 4096,
.mgr_height_max = 4096,
+ .ovl_width_max = 2048,
+ .ovl_height_max = 4096,
.max_lcd_pclk = 170000000,
.max_tv_pclk = 192000000,
.max_downscale = 4,
diff --git a/drivers/gpu/drm/omapdrm/dss/dss.h b/drivers/gpu/drm/omapdrm/dss/dss.h
index a547527bb2f3..14c39f7c3988 100644
--- a/drivers/gpu/drm/omapdrm/dss/dss.h
+++ b/drivers/gpu/drm/omapdrm/dss/dss.h
@@ -397,6 +397,8 @@ int dispc_get_num_mgrs(struct dispc_device *dispc);
const u32 *dispc_ovl_get_color_modes(struct dispc_device *dispc,
enum omap_plane_id plane);
+void dispc_ovl_get_max_size(struct dispc_device *dispc, u16 *width, u16 *height);
+
u32 dispc_read_irqstatus(struct dispc_device *dispc);
void dispc_clear_irqstatus(struct dispc_device *dispc, u32 mask);
void dispc_write_irqenable(struct dispc_device *dispc, u32 mask);
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 512af976b7e9..d0a67b7ed1a0 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -109,11 +109,18 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
{
struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
plane);
+ struct omap_drm_private *priv = plane->dev->dev_private;
struct drm_crtc_state *crtc_state;
+ u16 width, height;
+ u32 width_fp, height_fp;
if (!new_plane_state->fb)
return 0;
+ dispc_ovl_get_max_size(priv->dispc, &width, &height);
+ width_fp = width << 16;
+ height_fp = height << 16;
+
/* crtc should only be NULL when disabling (i.e., !new_plane_state->fb) */
if (WARN_ON(!new_plane_state->crtc))
return 0;
@@ -136,6 +143,13 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
if (new_plane_state->crtc_y + new_plane_state->crtc_h > crtc_state->adjusted_mode.vdisplay)
return -EINVAL;
+ /* Make sure dimensions are within bounds. */
+ if (new_plane_state->src_h > height_fp || new_plane_state->crtc_h > height)
+ return -EINVAL;
+
+ if (new_plane_state->src_w > width_fp || new_plane_state->crtc_w > width)
+ return -EINVAL;
+
if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
!omap_framebuffer_supports_rotation(new_plane_state->fb))
return -EINVAL;
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v5 1/8] drm/omap: Add ability to check if requested plane modes can be supported
2021-09-23 7:06 ` [PATCH v5 1/8] drm/omap: Add ability to check if requested plane modes can be supported Neil Armstrong
@ 2021-10-12 7:21 ` Tomi Valkeinen
2021-10-12 8:32 ` Neil Armstrong
0 siblings, 1 reply; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-12 7:21 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
Hi,
On 23/09/2021 10:06, Neil Armstrong wrote:
> From: Benoit Parrot <bparrot@ti.com>
>
> We currently assume that an overlay has the same maximum width and
> maximum height as the overlay manager. This assumption is incorrect. On
> some variants the overlay manager maximum width is twice the maximum
> width that the overlay can handle. We need to add the appropriate data
> per variant as well as export a helper function to retrieve the data so
> check can be made dynamically in omap_plane_atomic_check().
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/omapdrm/dss/dispc.c | 22 ++++++++++++++++++++++
> drivers/gpu/drm/omapdrm/dss/dss.h | 2 ++
> drivers/gpu/drm/omapdrm/omap_plane.c | 14 ++++++++++++++
> 3 files changed, 38 insertions(+)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
> index 3c4a4991e45a..bdecec8f4d88 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dispc.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
> @@ -92,6 +92,8 @@ struct dispc_features {
> u8 mgr_height_start;
> u16 mgr_width_max;
> u16 mgr_height_max;
> + u16 ovl_width_max;
> + u16 ovl_height_max;
> unsigned long max_lcd_pclk;
> unsigned long max_tv_pclk;
> unsigned int max_downscale;
> @@ -2599,6 +2601,12 @@ static int dispc_ovl_calc_scaling(struct dispc_device *dispc,
> return 0;
> }
>
> +void dispc_ovl_get_max_size(struct dispc_device *dispc, u16 *width, u16 *height)
> +{
> + *width = dispc->feat->ovl_width_max;
> + *height = dispc->feat->ovl_height_max;
> +}
> +
> static int dispc_ovl_setup_common(struct dispc_device *dispc,
> enum omap_plane_id plane,
> enum omap_overlay_caps caps,
> @@ -4240,6 +4248,8 @@ static const struct dispc_features omap24xx_dispc_feats = {
> .mgr_height_start = 26,
> .mgr_width_max = 2048,
> .mgr_height_max = 2048,
> + .ovl_width_max = 2048,
> + .ovl_height_max = 2048,
> .max_lcd_pclk = 66500000,
> .max_downscale = 2,
> /*
> @@ -4278,6 +4288,8 @@ static const struct dispc_features omap34xx_rev1_0_dispc_feats = {
> .mgr_height_start = 26,
> .mgr_width_max = 2048,
> .mgr_height_max = 2048,
> + .ovl_width_max = 2048,
> + .ovl_height_max = 2048,
> .max_lcd_pclk = 173000000,
> .max_tv_pclk = 59000000,
> .max_downscale = 4,
> @@ -4313,6 +4325,8 @@ static const struct dispc_features omap34xx_rev3_0_dispc_feats = {
> .mgr_height_start = 26,
> .mgr_width_max = 2048,
> .mgr_height_max = 2048,
> + .ovl_width_max = 2048,
> + .ovl_height_max = 2048,
> .max_lcd_pclk = 173000000,
> .max_tv_pclk = 59000000,
> .max_downscale = 4,
> @@ -4348,6 +4362,8 @@ static const struct dispc_features omap36xx_dispc_feats = {
> .mgr_height_start = 26,
> .mgr_width_max = 2048,
> .mgr_height_max = 2048,
> + .ovl_width_max = 2048,
> + .ovl_height_max = 2048,
> .max_lcd_pclk = 173000000,
> .max_tv_pclk = 59000000,
> .max_downscale = 4,
> @@ -4383,6 +4399,8 @@ static const struct dispc_features am43xx_dispc_feats = {
> .mgr_height_start = 26,
> .mgr_width_max = 2048,
> .mgr_height_max = 2048,
> + .ovl_width_max = 2048,
> + .ovl_height_max = 2048,
> .max_lcd_pclk = 173000000,
> .max_tv_pclk = 59000000,
> .max_downscale = 4,
> @@ -4418,6 +4436,8 @@ static const struct dispc_features omap44xx_dispc_feats = {
> .mgr_height_start = 26,
> .mgr_width_max = 2048,
> .mgr_height_max = 2048,
> + .ovl_width_max = 2048,
> + .ovl_height_max = 2048,
> .max_lcd_pclk = 170000000,
> .max_tv_pclk = 185625000,
> .max_downscale = 4,
> @@ -4457,6 +4477,8 @@ static const struct dispc_features omap54xx_dispc_feats = {
> .mgr_height_start = 27,
> .mgr_width_max = 4096,
> .mgr_height_max = 4096,
> + .ovl_width_max = 2048,
> + .ovl_height_max = 4096,
> .max_lcd_pclk = 170000000,
> .max_tv_pclk = 192000000,
> .max_downscale = 4,
> diff --git a/drivers/gpu/drm/omapdrm/dss/dss.h b/drivers/gpu/drm/omapdrm/dss/dss.h
> index a547527bb2f3..14c39f7c3988 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dss.h
> +++ b/drivers/gpu/drm/omapdrm/dss/dss.h
> @@ -397,6 +397,8 @@ int dispc_get_num_mgrs(struct dispc_device *dispc);
> const u32 *dispc_ovl_get_color_modes(struct dispc_device *dispc,
> enum omap_plane_id plane);
>
> +void dispc_ovl_get_max_size(struct dispc_device *dispc, u16 *width, u16 *height);
> +
> u32 dispc_read_irqstatus(struct dispc_device *dispc);
> void dispc_clear_irqstatus(struct dispc_device *dispc, u32 mask);
> void dispc_write_irqenable(struct dispc_device *dispc, u32 mask);
> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
> index 512af976b7e9..d0a67b7ed1a0 100644
> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
> @@ -109,11 +109,18 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
> {
> struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
> plane);
> + struct omap_drm_private *priv = plane->dev->dev_private;
> struct drm_crtc_state *crtc_state;
> + u16 width, height;
> + u32 width_fp, height_fp;
I think naming these max_w/max_width etc. would be better.
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 1/8] drm/omap: Add ability to check if requested plane modes can be supported
2021-10-12 7:21 ` Tomi Valkeinen
@ 2021-10-12 8:32 ` Neil Armstrong
0 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-10-12 8:32 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 12/10/2021 09:21, Tomi Valkeinen wrote:
> Hi,
>
> On 23/09/2021 10:06, Neil Armstrong wrote:
>> From: Benoit Parrot <bparrot@ti.com>
>>
>> We currently assume that an overlay has the same maximum width and
>> maximum height as the overlay manager. This assumption is incorrect. On
>> some variants the overlay manager maximum width is twice the maximum
>> width that the overlay can handle. We need to add the appropriate data
>> per variant as well as export a helper function to retrieve the data so
>> check can be made dynamically in omap_plane_atomic_check().
>>
>> Signed-off-by: Benoit Parrot <bparrot@ti.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/omapdrm/dss/dispc.c | 22 ++++++++++++++++++++++
>> drivers/gpu/drm/omapdrm/dss/dss.h | 2 ++
>> drivers/gpu/drm/omapdrm/omap_plane.c | 14 ++++++++++++++
>> 3 files changed, 38 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
>> index 3c4a4991e45a..bdecec8f4d88 100644
>> --- a/drivers/gpu/drm/omapdrm/dss/dispc.c
>> +++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
>> @@ -92,6 +92,8 @@ struct dispc_features {
>> u8 mgr_height_start;
>> u16 mgr_width_max;
>> u16 mgr_height_max;
>> + u16 ovl_width_max;
>> + u16 ovl_height_max;
>> unsigned long max_lcd_pclk;
>> unsigned long max_tv_pclk;
>> unsigned int max_downscale;
>> @@ -2599,6 +2601,12 @@ static int dispc_ovl_calc_scaling(struct dispc_device *dispc,
>> return 0;
>> }
>> +void dispc_ovl_get_max_size(struct dispc_device *dispc, u16 *width, u16 *height)
>> +{
>> + *width = dispc->feat->ovl_width_max;
>> + *height = dispc->feat->ovl_height_max;
>> +}
>> +
>> static int dispc_ovl_setup_common(struct dispc_device *dispc,
>> enum omap_plane_id plane,
>> enum omap_overlay_caps caps,
>> @@ -4240,6 +4248,8 @@ static const struct dispc_features omap24xx_dispc_feats = {
>> .mgr_height_start = 26,
>> .mgr_width_max = 2048,
>> .mgr_height_max = 2048,
>> + .ovl_width_max = 2048,
>> + .ovl_height_max = 2048,
>> .max_lcd_pclk = 66500000,
>> .max_downscale = 2,
>> /*
>> @@ -4278,6 +4288,8 @@ static const struct dispc_features omap34xx_rev1_0_dispc_feats = {
>> .mgr_height_start = 26,
>> .mgr_width_max = 2048,
>> .mgr_height_max = 2048,
>> + .ovl_width_max = 2048,
>> + .ovl_height_max = 2048,
>> .max_lcd_pclk = 173000000,
>> .max_tv_pclk = 59000000,
>> .max_downscale = 4,
>> @@ -4313,6 +4325,8 @@ static const struct dispc_features omap34xx_rev3_0_dispc_feats = {
>> .mgr_height_start = 26,
>> .mgr_width_max = 2048,
>> .mgr_height_max = 2048,
>> + .ovl_width_max = 2048,
>> + .ovl_height_max = 2048,
>> .max_lcd_pclk = 173000000,
>> .max_tv_pclk = 59000000,
>> .max_downscale = 4,
>> @@ -4348,6 +4362,8 @@ static const struct dispc_features omap36xx_dispc_feats = {
>> .mgr_height_start = 26,
>> .mgr_width_max = 2048,
>> .mgr_height_max = 2048,
>> + .ovl_width_max = 2048,
>> + .ovl_height_max = 2048,
>> .max_lcd_pclk = 173000000,
>> .max_tv_pclk = 59000000,
>> .max_downscale = 4,
>> @@ -4383,6 +4399,8 @@ static const struct dispc_features am43xx_dispc_feats = {
>> .mgr_height_start = 26,
>> .mgr_width_max = 2048,
>> .mgr_height_max = 2048,
>> + .ovl_width_max = 2048,
>> + .ovl_height_max = 2048,
>> .max_lcd_pclk = 173000000,
>> .max_tv_pclk = 59000000,
>> .max_downscale = 4,
>> @@ -4418,6 +4436,8 @@ static const struct dispc_features omap44xx_dispc_feats = {
>> .mgr_height_start = 26,
>> .mgr_width_max = 2048,
>> .mgr_height_max = 2048,
>> + .ovl_width_max = 2048,
>> + .ovl_height_max = 2048,
>> .max_lcd_pclk = 170000000,
>> .max_tv_pclk = 185625000,
>> .max_downscale = 4,
>> @@ -4457,6 +4477,8 @@ static const struct dispc_features omap54xx_dispc_feats = {
>> .mgr_height_start = 27,
>> .mgr_width_max = 4096,
>> .mgr_height_max = 4096,
>> + .ovl_width_max = 2048,
>> + .ovl_height_max = 4096,
>> .max_lcd_pclk = 170000000,
>> .max_tv_pclk = 192000000,
>> .max_downscale = 4,
>> diff --git a/drivers/gpu/drm/omapdrm/dss/dss.h b/drivers/gpu/drm/omapdrm/dss/dss.h
>> index a547527bb2f3..14c39f7c3988 100644
>> --- a/drivers/gpu/drm/omapdrm/dss/dss.h
>> +++ b/drivers/gpu/drm/omapdrm/dss/dss.h
>> @@ -397,6 +397,8 @@ int dispc_get_num_mgrs(struct dispc_device *dispc);
>> const u32 *dispc_ovl_get_color_modes(struct dispc_device *dispc,
>> enum omap_plane_id plane);
>> +void dispc_ovl_get_max_size(struct dispc_device *dispc, u16 *width, u16 *height);
>> +
>> u32 dispc_read_irqstatus(struct dispc_device *dispc);
>> void dispc_clear_irqstatus(struct dispc_device *dispc, u32 mask);
>> void dispc_write_irqenable(struct dispc_device *dispc, u32 mask);
>> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
>> index 512af976b7e9..d0a67b7ed1a0 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
>> @@ -109,11 +109,18 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
>> {
>> struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
>> plane);
>> + struct omap_drm_private *priv = plane->dev->dev_private;
>> struct drm_crtc_state *crtc_state;
>> + u16 width, height;
>> + u32 width_fp, height_fp;
>
> I think naming these max_w/max_width etc. would be better.
Ack
Neil
>
> Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v5 2/8] drm/omap: Add ovl checking funcs to dispc_ops
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
2021-09-23 7:06 ` [PATCH v5 1/8] drm/omap: Add ability to check if requested plane modes can be supported Neil Armstrong
@ 2021-09-23 7:06 ` Neil Armstrong
2021-09-23 7:06 ` [PATCH v5 3/8] drm/omap: introduce omap_hw_overlay Neil Armstrong
` (7 subsequent siblings)
9 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-09-23 7:06 UTC (permalink / raw)
To: tomba
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot,
Neil Armstrong
From: Benoit Parrot <bparrot@ti.com>
In order to be able to dynamically assign overlays to planes we need to
be able to asses the overlay capabilities.
Add a helper function to be able to retrieve the supported capabilities
of an overlay.
And export the function to check if a fourcc is supported on a given
overlay.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/omapdrm/dss/dispc.c | 9 +++++++--
drivers/gpu/drm/omapdrm/dss/dss.h | 3 +++
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index bdecec8f4d88..df945e4b1fd3 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -1281,8 +1281,8 @@ static u32 dispc_ovl_get_burst_size(struct dispc_device *dispc,
return dispc->feat->burst_size_unit * 8;
}
-static bool dispc_ovl_color_mode_supported(struct dispc_device *dispc,
- enum omap_plane_id plane, u32 fourcc)
+bool dispc_ovl_color_mode_supported(struct dispc_device *dispc,
+ enum omap_plane_id plane, u32 fourcc)
{
const u32 *modes;
unsigned int i;
@@ -2489,6 +2489,11 @@ static int dispc_ovl_calc_scaling_44xx(struct dispc_device *dispc,
return 0;
}
+enum omap_overlay_caps dispc_ovl_get_caps(struct dispc_device *dispc, enum omap_plane_id plane)
+{
+ return dispc->feat->overlay_caps[plane];
+}
+
#define DIV_FRAC(dividend, divisor) \
((dividend) * 100 / (divisor) - ((dividend) / (divisor) * 100))
diff --git a/drivers/gpu/drm/omapdrm/dss/dss.h b/drivers/gpu/drm/omapdrm/dss/dss.h
index 14c39f7c3988..4ff02fbc0e71 100644
--- a/drivers/gpu/drm/omapdrm/dss/dss.h
+++ b/drivers/gpu/drm/omapdrm/dss/dss.h
@@ -398,6 +398,9 @@ const u32 *dispc_ovl_get_color_modes(struct dispc_device *dispc,
enum omap_plane_id plane);
void dispc_ovl_get_max_size(struct dispc_device *dispc, u16 *width, u16 *height);
+bool dispc_ovl_color_mode_supported(struct dispc_device *dispc,
+ enum omap_plane_id plane, u32 fourcc);
+enum omap_overlay_caps dispc_ovl_get_caps(struct dispc_device *dispc, enum omap_plane_id plane);
u32 dispc_read_irqstatus(struct dispc_device *dispc);
void dispc_clear_irqstatus(struct dispc_device *dispc, u32 mask);
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v5 3/8] drm/omap: introduce omap_hw_overlay
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
2021-09-23 7:06 ` [PATCH v5 1/8] drm/omap: Add ability to check if requested plane modes can be supported Neil Armstrong
2021-09-23 7:06 ` [PATCH v5 2/8] drm/omap: Add ovl checking funcs to dispc_ops Neil Armstrong
@ 2021-09-23 7:06 ` Neil Armstrong
2021-10-12 7:59 ` Tomi Valkeinen
2021-09-23 7:06 ` [PATCH v5 4/8] drm/omap: omap_plane: subclass drm_plane_state Neil Armstrong
` (6 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Neil Armstrong @ 2021-09-23 7:06 UTC (permalink / raw)
To: tomba
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot,
Neil Armstrong
From: Benoit Parrot <bparrot@ti.com>
Split out the hardware overlay specifics from omap_plane.
To start, the hw overlays are statically assigned to planes.
The goal is to eventually assign hw overlays dynamically to planes
during plane->atomic_check() based on requested caps (scaling, YUV,
etc). And then perform hw overlay re-assignment if required.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/omapdrm/Makefile | 1 +
drivers/gpu/drm/omapdrm/omap_drv.c | 9 ++-
drivers/gpu/drm/omapdrm/omap_drv.h | 4 ++
drivers/gpu/drm/omapdrm/omap_overlay.c | 87 ++++++++++++++++++++++++++
drivers/gpu/drm/omapdrm/omap_overlay.h | 31 +++++++++
drivers/gpu/drm/omapdrm/omap_plane.c | 42 ++++++-------
6 files changed, 151 insertions(+), 23 deletions(-)
create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.c
create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.h
diff --git a/drivers/gpu/drm/omapdrm/Makefile b/drivers/gpu/drm/omapdrm/Makefile
index 21e8277ff88f..710b4e0abcf0 100644
--- a/drivers/gpu/drm/omapdrm/Makefile
+++ b/drivers/gpu/drm/omapdrm/Makefile
@@ -9,6 +9,7 @@ omapdrm-y := omap_drv.o \
omap_debugfs.o \
omap_crtc.o \
omap_plane.o \
+ omap_overlay.o \
omap_encoder.o \
omap_fb.o \
omap_gem.o \
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index f86e20578143..b994014b22e8 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -583,10 +583,14 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
omap_gem_init(ddev);
+ ret = omap_hwoverlays_init(priv);
+ if (ret)
+ goto err_gem_deinit;
+
ret = omap_modeset_init(ddev);
if (ret) {
dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
- goto err_gem_deinit;
+ goto err_free_overlays;
}
/* Initialize vblank handling, start with all CRTCs disabled. */
@@ -618,6 +622,8 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
omap_fbdev_fini(ddev);
err_cleanup_modeset:
omap_modeset_fini(ddev);
+err_free_overlays:
+ omap_hwoverlays_destroy(priv);
err_gem_deinit:
omap_gem_deinit(ddev);
destroy_workqueue(priv->wq);
@@ -642,6 +648,7 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
drm_atomic_helper_shutdown(ddev);
omap_modeset_fini(ddev);
+ omap_hwoverlays_destroy(priv);
omap_gem_deinit(ddev);
destroy_workqueue(priv->wq);
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 591d4c273f02..b4d9c2062723 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -24,6 +24,7 @@
#include "omap_gem.h"
#include "omap_irq.h"
#include "omap_plane.h"
+#include "omap_overlay.h"
#define DBG(fmt, ...) DRM_DEBUG_DRIVER(fmt"\n", ##__VA_ARGS__)
#define VERB(fmt, ...) if (0) DRM_DEBUG_DRIVER(fmt, ##__VA_ARGS__) /* verbose debug */
@@ -57,6 +58,9 @@ struct omap_drm_private {
unsigned int num_planes;
struct drm_plane *planes[8];
+ unsigned int num_ovls;
+ struct omap_hw_overlay *overlays[8];
+
struct drm_fb_helper *fbdev;
struct workqueue_struct *wq;
diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
new file mode 100644
index 000000000000..2b1416d2aad2
--- /dev/null
+++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Benoit Parrot, <bparrot@ti.com>
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_plane_helper.h>
+
+#include "omap_dmm_tiler.h"
+#include "omap_drv.h"
+
+/*
+ * overlay funcs
+ */
+static const char * const overlay_id_to_name[] = {
+ [OMAP_DSS_GFX] = "gfx",
+ [OMAP_DSS_VIDEO1] = "vid1",
+ [OMAP_DSS_VIDEO2] = "vid2",
+ [OMAP_DSS_VIDEO3] = "vid3",
+};
+
+static void omap_overlay_destroy(struct omap_hw_overlay *overlay)
+{
+ kfree(overlay);
+}
+
+static struct omap_hw_overlay *omap_overlay_init(enum omap_plane_id overlay_id,
+ enum omap_overlay_caps caps)
+{
+ struct omap_hw_overlay *overlay;
+
+ overlay = kzalloc(sizeof(*overlay), GFP_KERNEL);
+ if (!overlay)
+ return ERR_PTR(-ENOMEM);
+
+ overlay->name = overlay_id_to_name[overlay_id];
+ overlay->overlay_id = overlay_id;
+ overlay->caps = caps;
+ /*
+ * When this is called priv->num_crtcs is not known yet.
+ * Use a safe mask value to start with, it will get updated to the
+ * proper value after the first use.
+ */
+ overlay->possible_crtcs = 0xff;
+
+ return overlay;
+}
+
+int omap_hwoverlays_init(struct omap_drm_private *priv)
+{
+ static const enum omap_plane_id hw_plane_ids[] = {
+ OMAP_DSS_GFX, OMAP_DSS_VIDEO1,
+ OMAP_DSS_VIDEO2, OMAP_DSS_VIDEO3,
+ };
+ u32 num_overlays = dispc_get_num_ovls(priv->dispc);
+ enum omap_overlay_caps caps;
+ int i, ret;
+
+ for (i = 0; i < num_overlays; i++) {
+ struct omap_hw_overlay *overlay;
+
+ caps = dispc_ovl_get_caps(priv->dispc, hw_plane_ids[i]);
+ overlay = omap_overlay_init(hw_plane_ids[i], caps);
+ if (IS_ERR(overlay)) {
+ ret = PTR_ERR(overlay);
+ dev_err(priv->dev, "failed to construct overlay for %s (%d)\n",
+ overlay_id_to_name[i], ret);
+ return ret;
+ }
+ overlay->idx = priv->num_ovls;
+ priv->overlays[priv->num_ovls++] = overlay;
+ }
+
+ return 0;
+}
+
+void omap_hwoverlays_destroy(struct omap_drm_private *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->num_ovls; i++) {
+ omap_overlay_destroy(priv->overlays[i]);
+ priv->overlays[i] = NULL;
+ }
+}
diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
new file mode 100644
index 000000000000..892fecb67adb
--- /dev/null
+++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Benoit Parrot, <bparrot@ti.com>
+ */
+
+#ifndef __OMAPDRM_OVERLAY_H__
+#define __OMAPDRM_OVERLAY_H__
+
+#include <linux/types.h>
+
+enum drm_plane_type;
+
+struct drm_device;
+struct drm_mode_object;
+struct drm_plane;
+
+/* Used to associate a HW overlay/plane to a plane */
+struct omap_hw_overlay {
+ int idx;
+
+ const char *name;
+ enum omap_plane_id overlay_id;
+
+ enum omap_overlay_caps caps;
+ u32 possible_crtcs;
+};
+
+int omap_hwoverlays_init(struct omap_drm_private *priv);
+void omap_hwoverlays_destroy(struct omap_drm_private *priv);
+#endif /* __OMAPDRM_OVERLAY_H__ */
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index d0a67b7ed1a0..0df5381cc015 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -22,6 +22,8 @@ struct omap_plane {
struct drm_plane base;
enum omap_plane_id id;
const char *name;
+
+ struct omap_hw_overlay *overlay;
};
static int omap_plane_prepare_fb(struct drm_plane *plane,
@@ -49,6 +51,7 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
struct omap_plane *omap_plane = to_omap_plane(plane);
struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
plane);
+ enum omap_plane_id ovl_id = omap_plane->overlay->overlay_id;
struct omap_overlay_info info;
int ret;
@@ -77,17 +80,17 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
&info.paddr, &info.p_uv_addr);
/* and finally, update omapdss: */
- ret = dispc_ovl_setup(priv->dispc, omap_plane->id, &info,
+ ret = dispc_ovl_setup(priv->dispc, ovl_id, &info,
omap_crtc_timings(new_state->crtc), false,
omap_crtc_channel(new_state->crtc));
if (ret) {
dev_err(plane->dev->dev, "Failed to setup plane %s\n",
omap_plane->name);
- dispc_ovl_enable(priv->dispc, omap_plane->id, false);
+ dispc_ovl_enable(priv->dispc, ovl_id, false);
return;
}
- dispc_ovl_enable(priv->dispc, omap_plane->id, true);
+ dispc_ovl_enable(priv->dispc, ovl_id, true);
}
static void omap_plane_atomic_disable(struct drm_plane *plane,
@@ -97,11 +100,12 @@ static void omap_plane_atomic_disable(struct drm_plane *plane,
plane);
struct omap_drm_private *priv = plane->dev->dev_private;
struct omap_plane *omap_plane = to_omap_plane(plane);
+ enum omap_plane_id ovl_id = omap_plane->overlay->overlay_id;
new_state->rotation = DRM_MODE_ROTATE_0;
new_state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : omap_plane->id;
- dispc_ovl_enable(priv->dispc, omap_plane->id, false);
+ dispc_ovl_enable(priv->dispc, ovl_id, false);
}
static int omap_plane_atomic_check(struct drm_plane *plane,
@@ -213,7 +217,7 @@ static void omap_plane_reset(struct drm_plane *plane)
* plane.
*/
plane->state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY
- ? 0 : omap_plane->id;
+ ? 0 : omap_plane->overlay->overlay_id;
plane->state->color_encoding = DRM_COLOR_YCBCR_BT601;
plane->state->color_range = DRM_COLOR_YCBCR_FULL_RANGE;
}
@@ -282,13 +286,6 @@ static const char *plane_id_to_name[] = {
[OMAP_DSS_VIDEO3] = "vid3",
};
-static const enum omap_plane_id plane_idx_to_id[] = {
- OMAP_DSS_GFX,
- OMAP_DSS_VIDEO1,
- OMAP_DSS_VIDEO2,
- OMAP_DSS_VIDEO3,
-};
-
/* initialize plane */
struct drm_plane *omap_plane_init(struct drm_device *dev,
int idx, enum drm_plane_type type,
@@ -298,27 +295,28 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
unsigned int num_planes = dispc_get_num_ovls(priv->dispc);
struct drm_plane *plane;
struct omap_plane *omap_plane;
- enum omap_plane_id id;
int ret;
u32 nformats;
const u32 *formats;
- if (WARN_ON(idx >= ARRAY_SIZE(plane_idx_to_id)))
+ if (WARN_ON(idx >= num_planes))
return ERR_PTR(-EINVAL);
- id = plane_idx_to_id[idx];
-
- DBG("%s: type=%d", plane_id_to_name[id], type);
-
omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL);
if (!omap_plane)
return ERR_PTR(-ENOMEM);
- formats = dispc_ovl_get_color_modes(priv->dispc, id);
+ omap_plane->id = idx;
+ omap_plane->name = plane_id_to_name[idx];
+ omap_plane->overlay = priv->overlays[idx];
+
+ DBG("%s: type=%d", omap_plane->name, type);
+ DBG(" omap_plane->id: %d", omap_plane->id);
+ DBG(" crtc_mask: 0x%04x", possible_crtcs);
+
+ formats = dispc_ovl_get_color_modes(priv->dispc, omap_plane->overlay->overlay_id);
for (nformats = 0; formats[nformats]; ++nformats)
;
- omap_plane->id = id;
- omap_plane->name = plane_id_to_name[id];
plane = &omap_plane->base;
@@ -349,7 +347,7 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
error:
dev_err(dev->dev, "%s(): could not create plane: %s\n",
- __func__, plane_id_to_name[id]);
+ __func__, omap_plane->name);
kfree(omap_plane);
return NULL;
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v5 3/8] drm/omap: introduce omap_hw_overlay
2021-09-23 7:06 ` [PATCH v5 3/8] drm/omap: introduce omap_hw_overlay Neil Armstrong
@ 2021-10-12 7:59 ` Tomi Valkeinen
2021-10-12 8:47 ` Neil Armstrong
0 siblings, 1 reply; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-12 7:59 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 23/09/2021 10:06, Neil Armstrong wrote:
> From: Benoit Parrot <bparrot@ti.com>
>
> Split out the hardware overlay specifics from omap_plane.
> To start, the hw overlays are statically assigned to planes.
>
> The goal is to eventually assign hw overlays dynamically to planes
> during plane->atomic_check() based on requested caps (scaling, YUV,
> etc). And then perform hw overlay re-assignment if required.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/omapdrm/Makefile | 1 +
> drivers/gpu/drm/omapdrm/omap_drv.c | 9 ++-
> drivers/gpu/drm/omapdrm/omap_drv.h | 4 ++
> drivers/gpu/drm/omapdrm/omap_overlay.c | 87 ++++++++++++++++++++++++++
> drivers/gpu/drm/omapdrm/omap_overlay.h | 31 +++++++++
> drivers/gpu/drm/omapdrm/omap_plane.c | 42 ++++++-------
> 6 files changed, 151 insertions(+), 23 deletions(-)
> create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.c
> create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.h
>
> diff --git a/drivers/gpu/drm/omapdrm/Makefile b/drivers/gpu/drm/omapdrm/Makefile
> index 21e8277ff88f..710b4e0abcf0 100644
> --- a/drivers/gpu/drm/omapdrm/Makefile
> +++ b/drivers/gpu/drm/omapdrm/Makefile
> @@ -9,6 +9,7 @@ omapdrm-y := omap_drv.o \
> omap_debugfs.o \
> omap_crtc.o \
> omap_plane.o \
> + omap_overlay.o \
> omap_encoder.o \
> omap_fb.o \
> omap_gem.o \
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
> index f86e20578143..b994014b22e8 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -583,10 +583,14 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
>
> omap_gem_init(ddev);
>
> + ret = omap_hwoverlays_init(priv);
> + if (ret)
> + goto err_gem_deinit;
> +
> ret = omap_modeset_init(ddev);
> if (ret) {
> dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
> - goto err_gem_deinit;
> + goto err_free_overlays;
> }
>
> /* Initialize vblank handling, start with all CRTCs disabled. */
> @@ -618,6 +622,8 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
> omap_fbdev_fini(ddev);
> err_cleanup_modeset:
> omap_modeset_fini(ddev);
> +err_free_overlays:
> + omap_hwoverlays_destroy(priv);
> err_gem_deinit:
> omap_gem_deinit(ddev);
> destroy_workqueue(priv->wq);
> @@ -642,6 +648,7 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
> drm_atomic_helper_shutdown(ddev);
>
> omap_modeset_fini(ddev);
> + omap_hwoverlays_destroy(priv);
> omap_gem_deinit(ddev);
>
> destroy_workqueue(priv->wq);
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
> index 591d4c273f02..b4d9c2062723 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -24,6 +24,7 @@
> #include "omap_gem.h"
> #include "omap_irq.h"
> #include "omap_plane.h"
> +#include "omap_overlay.h"
>
> #define DBG(fmt, ...) DRM_DEBUG_DRIVER(fmt"\n", ##__VA_ARGS__)
> #define VERB(fmt, ...) if (0) DRM_DEBUG_DRIVER(fmt, ##__VA_ARGS__) /* verbose debug */
> @@ -57,6 +58,9 @@ struct omap_drm_private {
> unsigned int num_planes;
> struct drm_plane *planes[8];
>
> + unsigned int num_ovls;
> + struct omap_hw_overlay *overlays[8];
> +
> struct drm_fb_helper *fbdev;
>
> struct workqueue_struct *wq;
> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
> new file mode 100644
> index 000000000000..2b1416d2aad2
> --- /dev/null
> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
> @@ -0,0 +1,87 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Benoit Parrot, <bparrot@ti.com>
Extra comma there, and similar case below.
> + */
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_plane_helper.h>
> +
> +#include "omap_dmm_tiler.h"
> +#include "omap_drv.h"
> +
> +/*
> + * overlay funcs
> + */
> +static const char * const overlay_id_to_name[] = {
> + [OMAP_DSS_GFX] = "gfx",
> + [OMAP_DSS_VIDEO1] = "vid1",
> + [OMAP_DSS_VIDEO2] = "vid2",
> + [OMAP_DSS_VIDEO3] = "vid3",
> +};
I was expecting to see the name array to be removed from omap_plane.c as
it's moved here, but that's not the case. Why is that? Especially as
after this series these names make no sense with the planes.
> +static void omap_overlay_destroy(struct omap_hw_overlay *overlay)
> +{
> + kfree(overlay);
> +}
> +
> +static struct omap_hw_overlay *omap_overlay_init(enum omap_plane_id overlay_id,
> + enum omap_overlay_caps caps)
> +{
> + struct omap_hw_overlay *overlay;
> +
> + overlay = kzalloc(sizeof(*overlay), GFP_KERNEL);
> + if (!overlay)
> + return ERR_PTR(-ENOMEM);
> +
> + overlay->name = overlay_id_to_name[overlay_id];
> + overlay->overlay_id = overlay_id;
> + overlay->caps = caps;
> + /*
> + * When this is called priv->num_crtcs is not known yet.
> + * Use a safe mask value to start with, it will get updated to the
> + * proper value after the first use.
> + */
> + overlay->possible_crtcs = 0xff;
This sounds like a hack. Why do we need possible_crtcs anyway? If I'm
not mistaken, on all DSS versions any overlay can be used on any ctrtc.
On the DRM plane level we need the possible_crtc as the DRM framework
needs that (i.e. we just always set all crtcs available for all planes),
but why is it needed here?
> + return overlay;
> +}
> +
> +int omap_hwoverlays_init(struct omap_drm_private *priv)
> +{
> + static const enum omap_plane_id hw_plane_ids[] = {
> + OMAP_DSS_GFX, OMAP_DSS_VIDEO1,
> + OMAP_DSS_VIDEO2, OMAP_DSS_VIDEO3,
> + };
> + u32 num_overlays = dispc_get_num_ovls(priv->dispc);
> + enum omap_overlay_caps caps;
> + int i, ret;
> +
> + for (i = 0; i < num_overlays; i++) {
> + struct omap_hw_overlay *overlay;
> +
> + caps = dispc_ovl_get_caps(priv->dispc, hw_plane_ids[i]);
> + overlay = omap_overlay_init(hw_plane_ids[i], caps);
> + if (IS_ERR(overlay)) {
> + ret = PTR_ERR(overlay);
> + dev_err(priv->dev, "failed to construct overlay for %s (%d)\n",
> + overlay_id_to_name[i], ret);
> + return ret;
> + }
I think this leaks memory if omap_overlay_init() fails.
> + overlay->idx = priv->num_ovls;
> + priv->overlays[priv->num_ovls++] = overlay;
> + }
> +
> + return 0;
> +}
> +
> +void omap_hwoverlays_destroy(struct omap_drm_private *priv)
> +{
> + int i;
> +
> + for (i = 0; i < priv->num_ovls; i++) {
> + omap_overlay_destroy(priv->overlays[i]);
> + priv->overlays[i] = NULL;
> + }
> +}
> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
> new file mode 100644
> index 000000000000..892fecb67adb
> --- /dev/null
> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Benoit Parrot, <bparrot@ti.com>
> + */
> +
> +#ifndef __OMAPDRM_OVERLAY_H__
> +#define __OMAPDRM_OVERLAY_H__
> +
> +#include <linux/types.h>
> +
> +enum drm_plane_type;
> +
> +struct drm_device;
> +struct drm_mode_object;
> +struct drm_plane;
> +
> +/* Used to associate a HW overlay/plane to a plane */
> +struct omap_hw_overlay {
> + int idx;
unsigned int.
> +
> + const char *name;
> + enum omap_plane_id overlay_id;
Perhaps just "id" is fine. You don't have "overlay_name" there either,
but just "name".
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 3/8] drm/omap: introduce omap_hw_overlay
2021-10-12 7:59 ` Tomi Valkeinen
@ 2021-10-12 8:47 ` Neil Armstrong
0 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-10-12 8:47 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 12/10/2021 09:59, Tomi Valkeinen wrote:
> On 23/09/2021 10:06, Neil Armstrong wrote:
>> From: Benoit Parrot <bparrot@ti.com>
>>
>> Split out the hardware overlay specifics from omap_plane.
>> To start, the hw overlays are statically assigned to planes.
>>
>> The goal is to eventually assign hw overlays dynamically to planes
>> during plane->atomic_check() based on requested caps (scaling, YUV,
>> etc). And then perform hw overlay re-assignment if required.
>>
>> Signed-off-by: Benoit Parrot <bparrot@ti.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/omapdrm/Makefile | 1 +
>> drivers/gpu/drm/omapdrm/omap_drv.c | 9 ++-
>> drivers/gpu/drm/omapdrm/omap_drv.h | 4 ++
>> drivers/gpu/drm/omapdrm/omap_overlay.c | 87 ++++++++++++++++++++++++++
>> drivers/gpu/drm/omapdrm/omap_overlay.h | 31 +++++++++
>> drivers/gpu/drm/omapdrm/omap_plane.c | 42 ++++++-------
>> 6 files changed, 151 insertions(+), 23 deletions(-)
>> create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.c
>> create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.h
>>
>> diff --git a/drivers/gpu/drm/omapdrm/Makefile b/drivers/gpu/drm/omapdrm/Makefile
>> index 21e8277ff88f..710b4e0abcf0 100644
>> --- a/drivers/gpu/drm/omapdrm/Makefile
>> +++ b/drivers/gpu/drm/omapdrm/Makefile
>> @@ -9,6 +9,7 @@ omapdrm-y := omap_drv.o \
>> omap_debugfs.o \
>> omap_crtc.o \
>> omap_plane.o \
>> + omap_overlay.o \
>> omap_encoder.o \
>> omap_fb.o \
>> omap_gem.o \
>> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
>> index f86e20578143..b994014b22e8 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
>> @@ -583,10 +583,14 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
>> omap_gem_init(ddev);
>> + ret = omap_hwoverlays_init(priv);
>> + if (ret)
>> + goto err_gem_deinit;
>> +
>> ret = omap_modeset_init(ddev);
>> if (ret) {
>> dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
>> - goto err_gem_deinit;
>> + goto err_free_overlays;
>> }
>> /* Initialize vblank handling, start with all CRTCs disabled. */
>> @@ -618,6 +622,8 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
>> omap_fbdev_fini(ddev);
>> err_cleanup_modeset:
>> omap_modeset_fini(ddev);
>> +err_free_overlays:
>> + omap_hwoverlays_destroy(priv);
>> err_gem_deinit:
>> omap_gem_deinit(ddev);
>> destroy_workqueue(priv->wq);
>> @@ -642,6 +648,7 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
>> drm_atomic_helper_shutdown(ddev);
>> omap_modeset_fini(ddev);
>> + omap_hwoverlays_destroy(priv);
>> omap_gem_deinit(ddev);
>> destroy_workqueue(priv->wq);
>> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
>> index 591d4c273f02..b4d9c2062723 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
>> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
>> @@ -24,6 +24,7 @@
>> #include "omap_gem.h"
>> #include "omap_irq.h"
>> #include "omap_plane.h"
>> +#include "omap_overlay.h"
>> #define DBG(fmt, ...) DRM_DEBUG_DRIVER(fmt"\n", ##__VA_ARGS__)
>> #define VERB(fmt, ...) if (0) DRM_DEBUG_DRIVER(fmt, ##__VA_ARGS__) /* verbose debug */
>> @@ -57,6 +58,9 @@ struct omap_drm_private {
>> unsigned int num_planes;
>> struct drm_plane *planes[8];
>> + unsigned int num_ovls;
>> + struct omap_hw_overlay *overlays[8];
>> +
>> struct drm_fb_helper *fbdev;
>> struct workqueue_struct *wq;
>> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
>> new file mode 100644
>> index 000000000000..2b1416d2aad2
>> --- /dev/null
>> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
>> @@ -0,0 +1,87 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + * Author: Benoit Parrot, <bparrot@ti.com>
>
> Extra comma there, and similar case below.
Fixed
>
>> + */
>> +
>> +#include <drm/drm_atomic.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_plane_helper.h>
>> +
>> +#include "omap_dmm_tiler.h"
>> +#include "omap_drv.h"
>> +
>> +/*
>> + * overlay funcs
>> + */
>> +static const char * const overlay_id_to_name[] = {
>> + [OMAP_DSS_GFX] = "gfx",
>> + [OMAP_DSS_VIDEO1] = "vid1",
>> + [OMAP_DSS_VIDEO2] = "vid2",
>> + [OMAP_DSS_VIDEO3] = "vid3",
>> +};
>
> I was expecting to see the name array to be removed from omap_plane.c as it's moved here, but that's not the case. Why is that? Especially as after this series these names make no sense with the planes.
You're right, I'll remove the one from omap_plane.c and where it's used.
>
>> +static void omap_overlay_destroy(struct omap_hw_overlay *overlay)
>> +{
>> + kfree(overlay);
>> +}
>> +
>> +static struct omap_hw_overlay *omap_overlay_init(enum omap_plane_id overlay_id,
>> + enum omap_overlay_caps caps)
>> +{
>> + struct omap_hw_overlay *overlay;
>> +
>> + overlay = kzalloc(sizeof(*overlay), GFP_KERNEL);
>> + if (!overlay)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + overlay->name = overlay_id_to_name[overlay_id];
>> + overlay->overlay_id = overlay_id;
>> + overlay->caps = caps;
>> + /*
>> + * When this is called priv->num_crtcs is not known yet.
>> + * Use a safe mask value to start with, it will get updated to the
>> + * proper value after the first use.
>> + */
>> + overlay->possible_crtcs = 0xff;
>
> This sounds like a hack. Why do we need possible_crtcs anyway? If I'm not mistaken, on all DSS versions any overlay can be used on any ctrtc. On the DRM plane level we need the possible_crtc as the DRM framework needs that (i.e. we just always set all crtcs available for all planes), but why is it needed here?
Indeed, in omap_drv.c we have:
plane_crtc_mask = (1 << priv->num_pipes) - 1;
for all planes, so I'll rework this.
>
>> + return overlay;
>> +}
>> +
>> +int omap_hwoverlays_init(struct omap_drm_private *priv)
>> +{
>> + static const enum omap_plane_id hw_plane_ids[] = {
>> + OMAP_DSS_GFX, OMAP_DSS_VIDEO1,
>> + OMAP_DSS_VIDEO2, OMAP_DSS_VIDEO3,
>> + };
>> + u32 num_overlays = dispc_get_num_ovls(priv->dispc);
>> + enum omap_overlay_caps caps;
>> + int i, ret;
>> +
>> + for (i = 0; i < num_overlays; i++) {
>> + struct omap_hw_overlay *overlay;
>> +
>> + caps = dispc_ovl_get_caps(priv->dispc, hw_plane_ids[i]);
>> + overlay = omap_overlay_init(hw_plane_ids[i], caps);
>> + if (IS_ERR(overlay)) {
>> + ret = PTR_ERR(overlay);
>> + dev_err(priv->dev, "failed to construct overlay for %s (%d)\n",
>> + overlay_id_to_name[i], ret);
>> + return ret;
>> + }
>
> I think this leaks memory if omap_overlay_init() fails.
Fixed
>
>> + overlay->idx = priv->num_ovls;
>> + priv->overlays[priv->num_ovls++] = overlay;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void omap_hwoverlays_destroy(struct omap_drm_private *priv)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < priv->num_ovls; i++) {
>> + omap_overlay_destroy(priv->overlays[i]);
>> + priv->overlays[i] = NULL;
>> + }
>> +}
>> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
>> new file mode 100644
>> index 000000000000..892fecb67adb
>> --- /dev/null
>> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
>> @@ -0,0 +1,31 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + * Author: Benoit Parrot, <bparrot@ti.com>
>> + */
>> +
>> +#ifndef __OMAPDRM_OVERLAY_H__
>> +#define __OMAPDRM_OVERLAY_H__
>> +
>> +#include <linux/types.h>
>> +
>> +enum drm_plane_type;
>> +
>> +struct drm_device;
>> +struct drm_mode_object;
>> +struct drm_plane;
>> +
>> +/* Used to associate a HW overlay/plane to a plane */
>> +struct omap_hw_overlay {
>> + int idx;
>
> unsigned int.
>
>> +
>> + const char *name;
>> + enum omap_plane_id overlay_id;
>
> Perhaps just "id" is fine. You don't have "overlay_name" there either, but just "name".
Ack
>
> Tomi
Thanks,
Neil
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v5 4/8] drm/omap: omap_plane: subclass drm_plane_state
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
` (2 preceding siblings ...)
2021-09-23 7:06 ` [PATCH v5 3/8] drm/omap: introduce omap_hw_overlay Neil Armstrong
@ 2021-09-23 7:06 ` Neil Armstrong
2021-10-12 8:13 ` Tomi Valkeinen
2021-09-23 7:06 ` [PATCH v5 5/8] drm/omap: Add global state as a private atomic object Neil Armstrong
` (5 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Neil Armstrong @ 2021-09-23 7:06 UTC (permalink / raw)
To: tomba
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot,
Neil Armstrong
From: Benoit Parrot <bparrot@ti.com>
In preparation to add omap plane state specific extensions we need to
subclass drm_plane_state and add the relevant helpers.
The addition of specific extension will be done separately.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/omapdrm/omap_plane.c | 38 +++++++++++++++++++++++++---
1 file changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 0df5381cc015..bda794b4c915 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -16,6 +16,13 @@
* plane funcs
*/
+#define to_omap_plane_state(x) container_of(x, struct omap_plane_state, base)
+
+struct omap_plane_state {
+ /* Must be first. */
+ struct drm_plane_state base;
+};
+
#define to_omap_plane(x) container_of(x, struct omap_plane, base)
struct omap_plane {
@@ -207,11 +214,17 @@ void omap_plane_install_properties(struct drm_plane *plane,
static void omap_plane_reset(struct drm_plane *plane)
{
struct omap_plane *omap_plane = to_omap_plane(plane);
+ struct omap_plane_state *omap_state;
- drm_atomic_helper_plane_reset(plane);
- if (!plane->state)
+ if (plane->state)
+ drm_atomic_helper_plane_destroy_state(plane, plane->state);
+
+ omap_state = kzalloc(sizeof(*omap_state), GFP_KERNEL);
+ if (!omap_state)
return;
+ __drm_atomic_helper_plane_reset(plane, &omap_state->base);
+
/*
* Set the zpos default depending on whether we are a primary or overlay
* plane.
@@ -222,6 +235,25 @@ static void omap_plane_reset(struct drm_plane *plane)
plane->state->color_range = DRM_COLOR_YCBCR_FULL_RANGE;
}
+static struct drm_plane_state *
+omap_plane_atomic_duplicate_state(struct drm_plane *plane)
+{
+ struct omap_plane_state *state;
+ struct omap_plane_state *copy;
+
+ if (WARN_ON(!plane->state))
+ return NULL;
+
+ state = to_omap_plane_state(plane->state);
+ copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
+ if (!copy)
+ return NULL;
+
+ __drm_atomic_helper_plane_duplicate_state(plane, ©->base);
+
+ return ©->base;
+}
+
static int omap_plane_atomic_set_property(struct drm_plane *plane,
struct drm_plane_state *state,
struct drm_property *property,
@@ -257,7 +289,7 @@ static const struct drm_plane_funcs omap_plane_funcs = {
.disable_plane = drm_atomic_helper_disable_plane,
.reset = omap_plane_reset,
.destroy = omap_plane_destroy,
- .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+ .atomic_duplicate_state = omap_plane_atomic_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
.atomic_set_property = omap_plane_atomic_set_property,
.atomic_get_property = omap_plane_atomic_get_property,
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v5 4/8] drm/omap: omap_plane: subclass drm_plane_state
2021-09-23 7:06 ` [PATCH v5 4/8] drm/omap: omap_plane: subclass drm_plane_state Neil Armstrong
@ 2021-10-12 8:13 ` Tomi Valkeinen
2021-10-12 8:56 ` Neil Armstrong
0 siblings, 1 reply; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-12 8:13 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 23/09/2021 10:06, Neil Armstrong wrote:
> From: Benoit Parrot <bparrot@ti.com>
>
> In preparation to add omap plane state specific extensions we need to
> subclass drm_plane_state and add the relevant helpers.
>
> The addition of specific extension will be done separately.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/omapdrm/omap_plane.c | 38 +++++++++++++++++++++++++---
> 1 file changed, 35 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
> index 0df5381cc015..bda794b4c915 100644
> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
> @@ -16,6 +16,13 @@
> * plane funcs
> */
>
> +#define to_omap_plane_state(x) container_of(x, struct omap_plane_state, base)
> +
> +struct omap_plane_state {
> + /* Must be first. */
> + struct drm_plane_state base;
> +};
> +
> #define to_omap_plane(x) container_of(x, struct omap_plane, base)
>
> struct omap_plane {
> @@ -207,11 +214,17 @@ void omap_plane_install_properties(struct drm_plane *plane,
> static void omap_plane_reset(struct drm_plane *plane)
> {
> struct omap_plane *omap_plane = to_omap_plane(plane);
> + struct omap_plane_state *omap_state;
>
> - drm_atomic_helper_plane_reset(plane);
> - if (!plane->state)
> + if (plane->state)
> + drm_atomic_helper_plane_destroy_state(plane, plane->state);
> +
> + omap_state = kzalloc(sizeof(*omap_state), GFP_KERNEL);
> + if (!omap_state)
> return;
>
> + __drm_atomic_helper_plane_reset(plane, &omap_state->base);
> +
> /*
> * Set the zpos default depending on whether we are a primary or overlay
> * plane.
> @@ -222,6 +235,25 @@ static void omap_plane_reset(struct drm_plane *plane)
> plane->state->color_range = DRM_COLOR_YCBCR_FULL_RANGE;
> }
>
> +static struct drm_plane_state *
> +omap_plane_atomic_duplicate_state(struct drm_plane *plane)
> +{
> + struct omap_plane_state *state;
> + struct omap_plane_state *copy;
> +
> + if (WARN_ON(!plane->state))
> + return NULL;
> +
> + state = to_omap_plane_state(plane->state);
> + copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
> + if (!copy)
> + return NULL;
> +
> + __drm_atomic_helper_plane_duplicate_state(plane, ©->base);
> +
> + return ©->base;
> +}
> +
omap_crtc.c has similar, but slightly different, functions. I think it
would be good to use the same style in omap_plane, or, if the approach
above is better, change omap_crtc to match the style here.
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 4/8] drm/omap: omap_plane: subclass drm_plane_state
2021-10-12 8:13 ` Tomi Valkeinen
@ 2021-10-12 8:56 ` Neil Armstrong
0 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-10-12 8:56 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 12/10/2021 10:13, Tomi Valkeinen wrote:
> On 23/09/2021 10:06, Neil Armstrong wrote:
>> From: Benoit Parrot <bparrot@ti.com>
>>
>> In preparation to add omap plane state specific extensions we need to
>> subclass drm_plane_state and add the relevant helpers.
>>
>> The addition of specific extension will be done separately.
>>
>> Signed-off-by: Benoit Parrot <bparrot@ti.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/omapdrm/omap_plane.c | 38 +++++++++++++++++++++++++---
>> 1 file changed, 35 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
>> index 0df5381cc015..bda794b4c915 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
>> @@ -16,6 +16,13 @@
>> * plane funcs
>> */
>> +#define to_omap_plane_state(x) container_of(x, struct omap_plane_state, base)
>> +
>> +struct omap_plane_state {
>> + /* Must be first. */
>> + struct drm_plane_state base;
>> +};
>> +
>> #define to_omap_plane(x) container_of(x, struct omap_plane, base)
>> struct omap_plane {
>> @@ -207,11 +214,17 @@ void omap_plane_install_properties(struct drm_plane *plane,
>> static void omap_plane_reset(struct drm_plane *plane)
>> {
>> struct omap_plane *omap_plane = to_omap_plane(plane);
>> + struct omap_plane_state *omap_state;
>> - drm_atomic_helper_plane_reset(plane);
>> - if (!plane->state)
>> + if (plane->state)
>> + drm_atomic_helper_plane_destroy_state(plane, plane->state);
>> +
>> + omap_state = kzalloc(sizeof(*omap_state), GFP_KERNEL);
>> + if (!omap_state)
>> return;
>> + __drm_atomic_helper_plane_reset(plane, &omap_state->base);
>> +
>> /*
>> * Set the zpos default depending on whether we are a primary or overlay
>> * plane.
>> @@ -222,6 +235,25 @@ static void omap_plane_reset(struct drm_plane *plane)
>> plane->state->color_range = DRM_COLOR_YCBCR_FULL_RANGE;
>> }
>> +static struct drm_plane_state *
>> +omap_plane_atomic_duplicate_state(struct drm_plane *plane)
>> +{
>> + struct omap_plane_state *state;
>> + struct omap_plane_state *copy;
>> +
>> + if (WARN_ON(!plane->state))
>> + return NULL;
>> +
>> + state = to_omap_plane_state(plane->state);
>> + copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
>> + if (!copy)
>> + return NULL;
>> +
>> + __drm_atomic_helper_plane_duplicate_state(plane, ©->base);
>> +
>> + return ©->base;
>> +}
>> +
>
> omap_crtc.c has similar, but slightly different, functions. I think it would be good to use the same style in omap_plane, or, if the approach above is better, change omap_crtc to match the style here.
Indeed the crtc version is better, I used the same style.
Thanks,
Neil
>
> Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v5 5/8] drm/omap: Add global state as a private atomic object
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
` (3 preceding siblings ...)
2021-09-23 7:06 ` [PATCH v5 4/8] drm/omap: omap_plane: subclass drm_plane_state Neil Armstrong
@ 2021-09-23 7:06 ` Neil Armstrong
2021-10-12 10:44 ` Tomi Valkeinen
2021-09-23 7:06 ` [PATCH v5 6/8] drm/omap: dynamically assign hw overlays to planes Neil Armstrong
` (4 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Neil Armstrong @ 2021-09-23 7:06 UTC (permalink / raw)
To: tomba
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot,
Neil Armstrong
From: Benoit Parrot <bparrot@ti.com>
Global shared resources (like hw overlays) for omapdrm are implemented
as a part of atomic state using the drm_private_obj infrastructure
available in the atomic core.
omap_global_state is introduced as a drm atomic private object. The two
funcs omap_get_global_state() and omap_get_existing_global_state() are
the two variants that will be used to access omap_global_state.
drm_mode_config_init() needs to be called earlier because it
creates/initializes the private_obj link list maintained by the atomic
framework. The private_obj link list has to exist prior to calling
drm_atomic_private_obj_init(). Similarly the cleanup handler are
reordered appropriately.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/omapdrm/omap_drv.c | 91 +++++++++++++++++++++++++++++-
drivers/gpu/drm/omapdrm/omap_drv.h | 21 +++++++
2 files changed, 109 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index b994014b22e8..c7912374d393 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -128,6 +128,82 @@ static const struct drm_mode_config_funcs omap_mode_config_funcs = {
.atomic_commit = drm_atomic_helper_commit,
};
+/* Global/shared object state funcs */
+
+/*
+ * This is a helper that returns the private state currently in operation.
+ * Note that this would return the "old_state" if called in the atomic check
+ * path, and the "new_state" after the atomic swap has been done.
+ */
+struct omap_global_state *
+omap_get_existing_global_state(struct omap_drm_private *priv)
+{
+ return to_omap_global_state(priv->glob_obj.state);
+}
+
+/*
+ * This acquires the modeset lock set aside for global state, creates
+ * a new duplicated private object state.
+ */
+struct omap_global_state *__must_check
+omap_get_global_state(struct drm_atomic_state *s)
+{
+ struct omap_drm_private *priv = s->dev->dev_private;
+ struct drm_private_state *priv_state;
+
+ priv_state = drm_atomic_get_private_obj_state(s, &priv->glob_obj);
+ if (IS_ERR(priv_state))
+ return ERR_CAST(priv_state);
+
+ return to_omap_global_state(priv_state);
+}
+
+static struct drm_private_state *
+omap_global_duplicate_state(struct drm_private_obj *obj)
+{
+ struct omap_global_state *state;
+
+ state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return NULL;
+
+ __drm_atomic_helper_private_obj_duplicate_state(obj, &state->base);
+
+ return &state->base;
+}
+
+static void omap_global_destroy_state(struct drm_private_obj *obj,
+ struct drm_private_state *state)
+{
+ struct omap_global_state *omap_state = to_omap_global_state(state);
+
+ kfree(omap_state);
+}
+
+static const struct drm_private_state_funcs omap_global_state_funcs = {
+ .atomic_duplicate_state = omap_global_duplicate_state,
+ .atomic_destroy_state = omap_global_destroy_state,
+};
+
+static int omap_global_obj_init(struct drm_device *dev)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct omap_global_state *state;
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ drm_atomic_private_obj_init(dev, &priv->glob_obj, &state->base,
+ &omap_global_state_funcs);
+ return 0;
+}
+
+static void omap_global_obj_fini(struct omap_drm_private *priv)
+{
+ drm_atomic_private_obj_fini(&priv->glob_obj);
+}
+
static void omap_disconnect_pipelines(struct drm_device *ddev)
{
struct omap_drm_private *priv = ddev->dev_private;
@@ -231,8 +307,6 @@ static int omap_modeset_init(struct drm_device *dev)
if (!omapdss_stack_is_ready())
return -EPROBE_DEFER;
- drm_mode_config_init(dev);
-
ret = omap_modeset_init_properties(dev);
if (ret < 0)
return ret;
@@ -583,10 +657,16 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
omap_gem_init(ddev);
- ret = omap_hwoverlays_init(priv);
+ drm_mode_config_init(ddev);
+
+ ret = omap_global_obj_init(ddev);
if (ret)
goto err_gem_deinit;
+ ret = omap_hwoverlays_init(priv);
+ if (ret)
+ goto err_free_priv_obj;
+
ret = omap_modeset_init(ddev);
if (ret) {
dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
@@ -624,7 +704,10 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
omap_modeset_fini(ddev);
err_free_overlays:
omap_hwoverlays_destroy(priv);
+err_free_priv_obj:
+ omap_global_obj_fini(priv);
err_gem_deinit:
+ drm_mode_config_cleanup(ddev);
omap_gem_deinit(ddev);
destroy_workqueue(priv->wq);
omap_disconnect_pipelines(ddev);
@@ -649,6 +732,8 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
omap_modeset_fini(ddev);
omap_hwoverlays_destroy(priv);
+ omap_global_obj_fini(priv);
+ drm_mode_config_cleanup(ddev);
omap_gem_deinit(ddev);
destroy_workqueue(priv->wq);
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index b4d9c2062723..280cdd27bc8e 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -14,6 +14,7 @@
#include "dss/omapdss.h"
#include "dss/dss.h"
+#include <drm/drm_atomic.h>
#include <drm/drm_gem.h>
#include <drm/omap_drm.h>
@@ -41,6 +42,15 @@ struct omap_drm_pipeline {
unsigned int alias_id;
};
+/*
+ * Global private object state for tracking resources that are shared across
+ * multiple kms objects (planes/crtcs/etc).
+ */
+#define to_omap_global_state(x) container_of(x, struct omap_global_state, base)
+struct omap_global_state {
+ struct drm_private_state base;
+};
+
struct omap_drm_private {
struct drm_device *ddev;
struct device *dev;
@@ -61,6 +71,13 @@ struct omap_drm_private {
unsigned int num_ovls;
struct omap_hw_overlay *overlays[8];
+ /*
+ * Global private object state, Do not access directly, use
+ * omap_global_get_state()
+ */
+ struct drm_modeset_lock glob_obj_lock;
+ struct drm_private_obj glob_obj;
+
struct drm_fb_helper *fbdev;
struct workqueue_struct *wq;
@@ -88,5 +105,9 @@ struct omap_drm_private {
void omap_debugfs_init(struct drm_minor *minor);
+struct omap_global_state *__must_check
+omap_get_global_state(struct drm_atomic_state *s);
+struct omap_global_state *
+omap_get_existing_global_state(struct omap_drm_private *priv);
#endif /* __OMAPDRM_DRV_H__ */
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v5 5/8] drm/omap: Add global state as a private atomic object
2021-09-23 7:06 ` [PATCH v5 5/8] drm/omap: Add global state as a private atomic object Neil Armstrong
@ 2021-10-12 10:44 ` Tomi Valkeinen
2021-10-12 13:23 ` Neil Armstrong
0 siblings, 1 reply; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-12 10:44 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 23/09/2021 10:06, Neil Armstrong wrote:
> From: Benoit Parrot <bparrot@ti.com>
>
> Global shared resources (like hw overlays) for omapdrm are implemented
> as a part of atomic state using the drm_private_obj infrastructure
> available in the atomic core.
>
> omap_global_state is introduced as a drm atomic private object. The two
> funcs omap_get_global_state() and omap_get_existing_global_state() are
> the two variants that will be used to access omap_global_state.
>
> drm_mode_config_init() needs to be called earlier because it
> creates/initializes the private_obj link list maintained by the atomic
> framework. The private_obj link list has to exist prior to calling
> drm_atomic_private_obj_init(). Similarly the cleanup handler are
> reordered appropriately.
I'm not really familiar with the private object. Did you check how
current drivers use it? These patches are 3 years old, and things might
have changed around the private object.
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/omapdrm/omap_drv.c | 91 +++++++++++++++++++++++++++++-
> drivers/gpu/drm/omapdrm/omap_drv.h | 21 +++++++
> 2 files changed, 109 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
> index b994014b22e8..c7912374d393 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -128,6 +128,82 @@ static const struct drm_mode_config_funcs omap_mode_config_funcs = {
> .atomic_commit = drm_atomic_helper_commit,
> };
>
> +/* Global/shared object state funcs */
> +
> +/*
> + * This is a helper that returns the private state currently in operation.
> + * Note that this would return the "old_state" if called in the atomic check
> + * path, and the "new_state" after the atomic swap has been done.
> + */
> +struct omap_global_state *
> +omap_get_existing_global_state(struct omap_drm_private *priv)
> +{
> + return to_omap_global_state(priv->glob_obj.state);
> +}
> +
> +/*
> + * This acquires the modeset lock set aside for global state, creates
> + * a new duplicated private object state.
> + */
> +struct omap_global_state *__must_check
> +omap_get_global_state(struct drm_atomic_state *s)
> +{
> + struct omap_drm_private *priv = s->dev->dev_private;
> + struct drm_private_state *priv_state;
> +
> + priv_state = drm_atomic_get_private_obj_state(s, &priv->glob_obj);
> + if (IS_ERR(priv_state))
> + return ERR_CAST(priv_state);
> +
> + return to_omap_global_state(priv_state);
> +}
> +
> +static struct drm_private_state *
> +omap_global_duplicate_state(struct drm_private_obj *obj)
> +{
> + struct omap_global_state *state;
> +
> + state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL);
> + if (!state)
> + return NULL;
> +
> + __drm_atomic_helper_private_obj_duplicate_state(obj, &state->base);
> +
> + return &state->base;
> +}
> +
> +static void omap_global_destroy_state(struct drm_private_obj *obj,
> + struct drm_private_state *state)
> +{
> + struct omap_global_state *omap_state = to_omap_global_state(state);
> +
> + kfree(omap_state);
> +}
> +
> +static const struct drm_private_state_funcs omap_global_state_funcs = {
> + .atomic_duplicate_state = omap_global_duplicate_state,
> + .atomic_destroy_state = omap_global_destroy_state,
> +};
> +
> +static int omap_global_obj_init(struct drm_device *dev)
> +{
> + struct omap_drm_private *priv = dev->dev_private;
> + struct omap_global_state *state;
> +
> + state = kzalloc(sizeof(*state), GFP_KERNEL);
> + if (!state)
> + return -ENOMEM;
> +
> + drm_atomic_private_obj_init(dev, &priv->glob_obj, &state->base,
> + &omap_global_state_funcs);
> + return 0;
> +}
> +
> +static void omap_global_obj_fini(struct omap_drm_private *priv)
> +{
> + drm_atomic_private_obj_fini(&priv->glob_obj);
> +}
> +
> static void omap_disconnect_pipelines(struct drm_device *ddev)
> {
> struct omap_drm_private *priv = ddev->dev_private;
> @@ -231,8 +307,6 @@ static int omap_modeset_init(struct drm_device *dev)
> if (!omapdss_stack_is_ready())
> return -EPROBE_DEFER;
>
> - drm_mode_config_init(dev);
> -
> ret = omap_modeset_init_properties(dev);
> if (ret < 0)
> return ret;
> @@ -583,10 +657,16 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
>
> omap_gem_init(ddev);
>
> - ret = omap_hwoverlays_init(priv);
> + drm_mode_config_init(ddev);
> +
> + ret = omap_global_obj_init(ddev);
> if (ret)
> goto err_gem_deinit;
>
> + ret = omap_hwoverlays_init(priv);
> + if (ret)
> + goto err_free_priv_obj;
> +
> ret = omap_modeset_init(ddev);
> if (ret) {
> dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
> @@ -624,7 +704,10 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
> omap_modeset_fini(ddev);
> err_free_overlays:
> omap_hwoverlays_destroy(priv);
> +err_free_priv_obj:
> + omap_global_obj_fini(priv);
> err_gem_deinit:
> + drm_mode_config_cleanup(ddev);
> omap_gem_deinit(ddev);
> destroy_workqueue(priv->wq);
> omap_disconnect_pipelines(ddev);
> @@ -649,6 +732,8 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
>
> omap_modeset_fini(ddev);
> omap_hwoverlays_destroy(priv);
> + omap_global_obj_fini(priv);
> + drm_mode_config_cleanup(ddev);
> omap_gem_deinit(ddev);
>
> destroy_workqueue(priv->wq);
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
> index b4d9c2062723..280cdd27bc8e 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -14,6 +14,7 @@
> #include "dss/omapdss.h"
> #include "dss/dss.h"
>
> +#include <drm/drm_atomic.h>
> #include <drm/drm_gem.h>
> #include <drm/omap_drm.h>
>
> @@ -41,6 +42,15 @@ struct omap_drm_pipeline {
> unsigned int alias_id;
> };
>
> +/*
> + * Global private object state for tracking resources that are shared across
> + * multiple kms objects (planes/crtcs/etc).
> + */
> +#define to_omap_global_state(x) container_of(x, struct omap_global_state, base)
Add empty line here.
> +struct omap_global_state {
> + struct drm_private_state base;
> +};
> +
> struct omap_drm_private {
> struct drm_device *ddev;
> struct device *dev;
> @@ -61,6 +71,13 @@ struct omap_drm_private {
> unsigned int num_ovls;
> struct omap_hw_overlay *overlays[8];
>
> + /*
> + * Global private object state, Do not access directly, use
> + * omap_global_get_state()
> + */
> + struct drm_modeset_lock glob_obj_lock;
This is not used... What am I missing?
> + struct drm_private_obj glob_obj;
> +
> struct drm_fb_helper *fbdev;
>
> struct workqueue_struct *wq;
> @@ -88,5 +105,9 @@ struct omap_drm_private {
>
>
> void omap_debugfs_init(struct drm_minor *minor);
> +struct omap_global_state *__must_check
> +omap_get_global_state(struct drm_atomic_state *s);
> +struct omap_global_state *
> +omap_get_existing_global_state(struct omap_drm_private *priv);
These could also be separated by empty lines. At least to my eyes it
gets confusing if those declarations are not separated.
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 5/8] drm/omap: Add global state as a private atomic object
2021-10-12 10:44 ` Tomi Valkeinen
@ 2021-10-12 13:23 ` Neil Armstrong
2021-10-12 13:38 ` Tomi Valkeinen
0 siblings, 1 reply; 27+ messages in thread
From: Neil Armstrong @ 2021-10-12 13:23 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
Hi,
On 12/10/2021 12:44, Tomi Valkeinen wrote:
> On 23/09/2021 10:06, Neil Armstrong wrote:
>> From: Benoit Parrot <bparrot@ti.com>
>>
>> Global shared resources (like hw overlays) for omapdrm are implemented
>> as a part of atomic state using the drm_private_obj infrastructure
>> available in the atomic core.
>>
>> omap_global_state is introduced as a drm atomic private object. The two
>> funcs omap_get_global_state() and omap_get_existing_global_state() are
>> the two variants that will be used to access omap_global_state.
>>
>> drm_mode_config_init() needs to be called earlier because it
>> creates/initializes the private_obj link list maintained by the atomic
>> framework. The private_obj link list has to exist prior to calling
>> drm_atomic_private_obj_init(). Similarly the cleanup handler are
>> reordered appropriately.
>
> I'm not really familiar with the private object. Did you check how current drivers use it? These patches are 3 years old, and things might have changed around the private object.
Indeed, I checked and this is used in vc4/tegra/arm/amd & msm in the same as way.
>
>> Signed-off-by: Benoit Parrot <bparrot@ti.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/omapdrm/omap_drv.c | 91 +++++++++++++++++++++++++++++-
>> drivers/gpu/drm/omapdrm/omap_drv.h | 21 +++++++
>> 2 files changed, 109 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
>> index b994014b22e8..c7912374d393 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
>> @@ -128,6 +128,82 @@ static const struct drm_mode_config_funcs omap_mode_config_funcs = {
>> .atomic_commit = drm_atomic_helper_commit,
>> };
>> +/* Global/shared object state funcs */
>> +
>> +/*
>> + * This is a helper that returns the private state currently in operation.
>> + * Note that this would return the "old_state" if called in the atomic check
>> + * path, and the "new_state" after the atomic swap has been done.
>> + */
>> +struct omap_global_state *
>> +omap_get_existing_global_state(struct omap_drm_private *priv)
>> +{
>> + return to_omap_global_state(priv->glob_obj.state);
>> +}
>> +
>> +/*
>> + * This acquires the modeset lock set aside for global state, creates
>> + * a new duplicated private object state.
>> + */
>> +struct omap_global_state *__must_check
>> +omap_get_global_state(struct drm_atomic_state *s)
>> +{
>> + struct omap_drm_private *priv = s->dev->dev_private;
>> + struct drm_private_state *priv_state;
>> +
>> + priv_state = drm_atomic_get_private_obj_state(s, &priv->glob_obj);
>> + if (IS_ERR(priv_state))
>> + return ERR_CAST(priv_state);
>> +
>> + return to_omap_global_state(priv_state);
>> +}
>> +
>> +static struct drm_private_state *
>> +omap_global_duplicate_state(struct drm_private_obj *obj)
>> +{
>> + struct omap_global_state *state;
>> +
>> + state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL);
>> + if (!state)
>> + return NULL;
>> +
>> + __drm_atomic_helper_private_obj_duplicate_state(obj, &state->base);
>> +
>> + return &state->base;
>> +}
>> +
>> +static void omap_global_destroy_state(struct drm_private_obj *obj,
>> + struct drm_private_state *state)
>> +{
>> + struct omap_global_state *omap_state = to_omap_global_state(state);
>> +
>> + kfree(omap_state);
>> +}
>> +
>> +static const struct drm_private_state_funcs omap_global_state_funcs = {
>> + .atomic_duplicate_state = omap_global_duplicate_state,
>> + .atomic_destroy_state = omap_global_destroy_state,
>> +};
>> +
>> +static int omap_global_obj_init(struct drm_device *dev)
>> +{
>> + struct omap_drm_private *priv = dev->dev_private;
>> + struct omap_global_state *state;
>> +
>> + state = kzalloc(sizeof(*state), GFP_KERNEL);
>> + if (!state)
>> + return -ENOMEM;
>> +
>> + drm_atomic_private_obj_init(dev, &priv->glob_obj, &state->base,
>> + &omap_global_state_funcs);
>> + return 0;
>> +}
>> +
>> +static void omap_global_obj_fini(struct omap_drm_private *priv)
>> +{
>> + drm_atomic_private_obj_fini(&priv->glob_obj);
>> +}
>> +
>> static void omap_disconnect_pipelines(struct drm_device *ddev)
>> {
>> struct omap_drm_private *priv = ddev->dev_private;
>> @@ -231,8 +307,6 @@ static int omap_modeset_init(struct drm_device *dev)
>> if (!omapdss_stack_is_ready())
>> return -EPROBE_DEFER;
>> - drm_mode_config_init(dev);
>> -
>> ret = omap_modeset_init_properties(dev);
>> if (ret < 0)
>> return ret;
>> @@ -583,10 +657,16 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
>> omap_gem_init(ddev);
>> - ret = omap_hwoverlays_init(priv);
>> + drm_mode_config_init(ddev);
>> +
>> + ret = omap_global_obj_init(ddev);
>> if (ret)
>> goto err_gem_deinit;
>> + ret = omap_hwoverlays_init(priv);
>> + if (ret)
>> + goto err_free_priv_obj;
>> +
>> ret = omap_modeset_init(ddev);
>> if (ret) {
>> dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret);
>> @@ -624,7 +704,10 @@ static int omapdrm_init(struct omap_drm_private *priv, struct device *dev)
>> omap_modeset_fini(ddev);
>> err_free_overlays:
>> omap_hwoverlays_destroy(priv);
>> +err_free_priv_obj:
>> + omap_global_obj_fini(priv);
>> err_gem_deinit:
>> + drm_mode_config_cleanup(ddev);
>> omap_gem_deinit(ddev);
>> destroy_workqueue(priv->wq);
>> omap_disconnect_pipelines(ddev);
>> @@ -649,6 +732,8 @@ static void omapdrm_cleanup(struct omap_drm_private *priv)
>> omap_modeset_fini(ddev);
>> omap_hwoverlays_destroy(priv);
>> + omap_global_obj_fini(priv);
>> + drm_mode_config_cleanup(ddev);
>> omap_gem_deinit(ddev);
>> destroy_workqueue(priv->wq);
>> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
>> index b4d9c2062723..280cdd27bc8e 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
>> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
>> @@ -14,6 +14,7 @@
>> #include "dss/omapdss.h"
>> #include "dss/dss.h"
>> +#include <drm/drm_atomic.h>
>> #include <drm/drm_gem.h>
>> #include <drm/omap_drm.h>
>> @@ -41,6 +42,15 @@ struct omap_drm_pipeline {
>> unsigned int alias_id;
>> };
>> +/*
>> + * Global private object state for tracking resources that are shared across
>> + * multiple kms objects (planes/crtcs/etc).
>> + */
>> +#define to_omap_global_state(x) container_of(x, struct omap_global_state, base)
>
> Add empty line here.
Ack
>
>> +struct omap_global_state {
>> + struct drm_private_state base;
>> +};
>> +
>> struct omap_drm_private {
>> struct drm_device *ddev;
>> struct device *dev;
>> @@ -61,6 +71,13 @@ struct omap_drm_private {
>> unsigned int num_ovls;
>> struct omap_hw_overlay *overlays[8];
>> + /*
>> + * Global private object state, Do not access directly, use
>> + * omap_global_get_state()
>> + */
>> + struct drm_modeset_lock glob_obj_lock;
>
> This is not used... What am I missing?
It's a leftover from v4, now the lock has been moved into drm_atomic_get_private_obj_state()
>
>> + struct drm_private_obj glob_obj;
>> +
>> struct drm_fb_helper *fbdev;
>> struct workqueue_struct *wq;
>> @@ -88,5 +105,9 @@ struct omap_drm_private {
>> void omap_debugfs_init(struct drm_minor *minor);
>> +struct omap_global_state *__must_check
>> +omap_get_global_state(struct drm_atomic_state *s);
>> +struct omap_global_state *
>> +omap_get_existing_global_state(struct omap_drm_private *priv);
>
> These could also be separated by empty lines. At least to my eyes it gets confusing if those declarations are not separated.
Atomic states can be extremely confusing, and hard to track.
I checked and they do what they are documented for...
The omap_get_existing_global_state() is the most confusing since the result depends if
we are in an atomic transaction of not.
Neil
>
> Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 5/8] drm/omap: Add global state as a private atomic object
2021-10-12 13:23 ` Neil Armstrong
@ 2021-10-12 13:38 ` Tomi Valkeinen
2021-10-12 15:41 ` Neil Armstrong
0 siblings, 1 reply; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-12 13:38 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 12/10/2021 16:23, Neil Armstrong wrote:
>>> + struct drm_private_obj glob_obj;
>>> +
>>> struct drm_fb_helper *fbdev;
>>> struct workqueue_struct *wq;
>>> @@ -88,5 +105,9 @@ struct omap_drm_private {
>>> void omap_debugfs_init(struct drm_minor *minor);
>>> +struct omap_global_state *__must_check
>>> +omap_get_global_state(struct drm_atomic_state *s);
>>> +struct omap_global_state *
>>> +omap_get_existing_global_state(struct omap_drm_private *priv);
>>
>> These could also be separated by empty lines. At least to my eyes it gets confusing if those declarations are not separated.
>
> Atomic states can be extremely confusing, and hard to track.
> I checked and they do what they are documented for...
>
> The omap_get_existing_global_state() is the most confusing since the result depends if
> we are in an atomic transaction of not.
So here I was just talking about the cosmetics, how the lines above look
like. I have trouble seeing where the function declaration starts and
where it ends without looking closely, as both lines of the declaration
start at the first column, and there are no empty lines between the
declarations.
But now that you mention, yes, the states are confusing =). And this
series is somewhat difficult. I think it's important for future
maintainability to include explanations and comments in this series for
the confusing parts (plane-overlay mapping and state handling, mostly).
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 5/8] drm/omap: Add global state as a private atomic object
2021-10-12 13:38 ` Tomi Valkeinen
@ 2021-10-12 15:41 ` Neil Armstrong
0 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-10-12 15:41 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 12/10/2021 15:38, Tomi Valkeinen wrote:
> On 12/10/2021 16:23, Neil Armstrong wrote:
>
>>>> + struct drm_private_obj glob_obj;
>>>> +
>>>> struct drm_fb_helper *fbdev;
>>>> struct workqueue_struct *wq;
>>>> @@ -88,5 +105,9 @@ struct omap_drm_private {
>>>> void omap_debugfs_init(struct drm_minor *minor);
>>>> +struct omap_global_state *__must_check
>>>> +omap_get_global_state(struct drm_atomic_state *s);
>>>> +struct omap_global_state *
>>>> +omap_get_existing_global_state(struct omap_drm_private *priv);
>>>
>>> These could also be separated by empty lines. At least to my eyes it gets confusing if those declarations are not separated.
>>
>> Atomic states can be extremely confusing, and hard to track.
>> I checked and they do what they are documented for...
>>
>> The omap_get_existing_global_state() is the most confusing since the result depends if
>> we are in an atomic transaction of not.
>
> So here I was just talking about the cosmetics, how the lines above look like. I have trouble seeing where the function declaration starts and where it ends without looking closely, as both lines of the declaration start at the first column, and there are no empty lines between the declarations.
Ok, it's a legacy of the 80chars max, will reformat.
>
> But now that you mention, yes, the states are confusing =). And this series is somewhat difficult. I think it's important for future maintainability to include explanations and comments in this series for the confusing parts (plane-overlay mapping and state handling, mostly).
Yep I added some hopefully useful comments explaining that.
Neil
>
> Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v5 6/8] drm/omap: dynamically assign hw overlays to planes
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
` (4 preceding siblings ...)
2021-09-23 7:06 ` [PATCH v5 5/8] drm/omap: Add global state as a private atomic object Neil Armstrong
@ 2021-09-23 7:06 ` Neil Armstrong
2021-10-12 13:34 ` Tomi Valkeinen
2021-09-23 7:07 ` [PATCH v5 7/8] drm/omap: add plane_atomic_print_state support Neil Armstrong
` (3 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Neil Armstrong @ 2021-09-23 7:06 UTC (permalink / raw)
To: tomba
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot,
Neil Armstrong
From: Benoit Parrot <bparrot@ti.com>
(re)assign the hw overlays to planes based on required caps, and to
handle situations where we could not modify an in-use plane.
This means all planes advertise the superset of formats and properties.
Userspace must (as always) use atomic TEST_ONLY step for atomic updates,
as not all planes may be available for use on every frame.
The mapping of hwoverlays to plane is stored in omap_global_state, so
that state updates are atomically committed in the same way that
plane/etc state updates are managed. This is needed because the
omap_plane_state keeps a pointer to the hwoverlay, and we don't want
global state to become out of sync with the plane state if an atomic
update fails, we hit deadlock/ backoff scenario, etc. The use of
global_state_lock keeps multiple parallel updates which both re-assign
hwoverlays properly serialized.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/omapdrm/omap_drv.h | 3 +
drivers/gpu/drm/omapdrm/omap_overlay.c | 140 ++++++++++++++++++++
drivers/gpu/drm/omapdrm/omap_overlay.h | 9 ++
drivers/gpu/drm/omapdrm/omap_plane.c | 170 ++++++++++++++++++++-----
4 files changed, 287 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 280cdd27bc8e..2d5928f05a23 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -49,6 +49,9 @@ struct omap_drm_pipeline {
#define to_omap_global_state(x) container_of(x, struct omap_global_state, base)
struct omap_global_state {
struct drm_private_state base;
+
+ /* global atomic state of assignment between overlays and planes */
+ struct drm_plane *hwoverlay_to_plane[8];
};
struct omap_drm_private {
diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
index 2b1416d2aad2..f1a23c2203aa 100644
--- a/drivers/gpu/drm/omapdrm/omap_overlay.c
+++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
@@ -21,6 +21,146 @@ static const char * const overlay_id_to_name[] = {
[OMAP_DSS_VIDEO3] = "vid3",
};
+static struct omap_hw_overlay *
+omap_plane_find_free_overlay(struct drm_device *dev,
+ struct drm_plane *hwoverlay_to_plane[],
+ u32 caps, u32 fourcc, u32 crtc_mask)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ int i;
+
+ DBG("caps: %x fourcc: %x crtc: %x", caps, fourcc, crtc_mask);
+
+ for (i = 0; i < priv->num_ovls; i++) {
+ struct omap_hw_overlay *cur = priv->overlays[i];
+
+ DBG("%d: id: %d cur->caps: %x cur->crtc: %x",
+ cur->idx, cur->overlay_id, cur->caps, cur->possible_crtcs);
+
+ /* skip if already in-use */
+ if (hwoverlay_to_plane[cur->idx])
+ continue;
+
+ /* check if allowed on crtc */
+ if (!(cur->possible_crtcs & crtc_mask))
+ continue;
+
+ /* skip if doesn't support some required caps: */
+ if (caps & ~cur->caps)
+ continue;
+
+ /* check supported format */
+ if (!dispc_ovl_color_mode_supported(priv->dispc,
+ cur->overlay_id, fourcc))
+ continue;
+
+ return cur;
+ }
+
+ DBG("no match");
+ return NULL;
+}
+
+int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
+ u32 caps, u32 fourcc, u32 crtc_mask,
+ struct omap_hw_overlay **overlay)
+{
+ struct omap_drm_private *priv = s->dev->dev_private;
+ struct omap_global_state *new_global_state, *old_global_state;
+ struct drm_plane **overlay_map;
+ struct omap_hw_overlay *ovl;
+
+ new_global_state = omap_get_global_state(s);
+ if (IS_ERR(new_global_state))
+ return PTR_ERR(new_global_state);
+
+ /*
+ * grab old_state after omap_get_global_state(),
+ * since now we hold lock:
+ */
+ old_global_state = omap_get_existing_global_state(priv);
+ DBG("new_global_state: %p old_global_state: %p",
+ new_global_state, old_global_state);
+
+ overlay_map = new_global_state->hwoverlay_to_plane;
+
+ if (!*overlay) {
+ ovl = omap_plane_find_free_overlay(s->dev, overlay_map,
+ caps, fourcc, crtc_mask);
+ if (!ovl)
+ return -ENOMEM;
+
+ ovl->possible_crtcs = crtc_mask;
+ overlay_map[ovl->idx] = plane;
+ *overlay = ovl;
+
+ DBG("%s: assign to plane %s caps %x on crtc %x",
+ (*overlay)->name, plane->name, caps, crtc_mask);
+ }
+
+ return 0;
+}
+
+void omap_overlay_release(struct drm_atomic_state *s,
+ struct drm_plane *plane,
+ struct omap_hw_overlay *overlay)
+{
+ struct omap_global_state *state = omap_get_global_state(s);
+ struct drm_plane **overlay_map = state->hwoverlay_to_plane;
+
+ if (!overlay)
+ return;
+
+ if (WARN_ON(!overlay_map[overlay->idx]))
+ return;
+ /*
+ * Check that the overlay we are releasing is actually
+ * assigned to the plane we are trying to release it from.
+ */
+ if (overlay_map[overlay->idx] == plane) {
+ DBG("%s: release from plane %s", overlay->name, plane->name);
+
+ overlay_map[overlay->idx] = NULL;
+ }
+}
+
+void omap_overlay_disable(struct drm_atomic_state *s,
+ struct drm_plane *plane,
+ struct omap_hw_overlay *overlay)
+{
+ struct omap_drm_private *priv = s->dev->dev_private;
+ struct drm_plane **overlay_map;
+ struct omap_global_state *old_state;
+
+ old_state = omap_get_existing_global_state(priv);
+ overlay_map = old_state->hwoverlay_to_plane;
+
+ if (!overlay)
+ return;
+
+ /*
+ * Check that the overlay we are trying to disable has not
+ * been re-assigned to another plane already
+ */
+ if (!overlay_map[overlay->idx]) {
+ DBG("%s: on %s disabled", overlay->name, plane->name);
+
+ /* disable the overlay */
+ dispc_ovl_enable(priv->dispc, overlay->overlay_id, false);
+
+ /*
+ * Since we are disabling this overlay in this
+ * atomic cycle we can reset the available crtcs
+ * it can be used on
+ */
+ overlay->possible_crtcs = (1 << priv->num_pipes) - 1;
+ }
+
+ /*
+ * Otherwise the overlay is still in use so leave it alone
+ */
+}
+
static void omap_overlay_destroy(struct omap_hw_overlay *overlay)
{
kfree(overlay);
diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
index 892fecb67adb..d5033ee481c2 100644
--- a/drivers/gpu/drm/omapdrm/omap_overlay.h
+++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
@@ -28,4 +28,13 @@ struct omap_hw_overlay {
int omap_hwoverlays_init(struct omap_drm_private *priv);
void omap_hwoverlays_destroy(struct omap_drm_private *priv);
+int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
+ u32 caps, u32 fourcc, u32 crtc_mask,
+ struct omap_hw_overlay **overlay);
+void omap_overlay_release(struct drm_atomic_state *s,
+ struct drm_plane *plane,
+ struct omap_hw_overlay *overlay);
+void omap_overlay_disable(struct drm_atomic_state *s,
+ struct drm_plane *plane,
+ struct omap_hw_overlay *overlay);
#endif /* __OMAPDRM_OVERLAY_H__ */
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index bda794b4c915..4b400a8bfe9e 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -8,6 +8,7 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_gem_atomic_helper.h>
#include <drm/drm_plane_helper.h>
+#include <drm/drm_fourcc.h>
#include "omap_dmm_tiler.h"
#include "omap_drv.h"
@@ -21,6 +22,8 @@
struct omap_plane_state {
/* Must be first. */
struct drm_plane_state base;
+
+ struct omap_hw_overlay *overlay;
};
#define to_omap_plane(x) container_of(x, struct omap_plane, base)
@@ -29,8 +32,6 @@ struct omap_plane {
struct drm_plane base;
enum omap_plane_id id;
const char *name;
-
- struct omap_hw_overlay *overlay;
};
static int omap_plane_prepare_fb(struct drm_plane *plane,
@@ -58,10 +59,27 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
struct omap_plane *omap_plane = to_omap_plane(plane);
struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
plane);
- enum omap_plane_id ovl_id = omap_plane->overlay->overlay_id;
+ struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
+ plane);
+ struct omap_plane_state *new_omap_state;
+ struct omap_plane_state *old_omap_state;
struct omap_overlay_info info;
+ enum omap_plane_id ovl_id;
int ret;
+ new_omap_state = to_omap_plane_state(new_state);
+ old_omap_state = to_omap_plane_state(old_state);
+
+ /* Cleanup previously held overlay if needed */
+ omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
+
+ if (!new_omap_state->overlay) {
+ DBG("[PLANE:%d:%s] overlay_id: ??? (%p)", plane->base.id, plane->name,
+ new_omap_state->overlay);
+ return;
+ }
+
+ ovl_id = new_omap_state->overlay->overlay_id;
DBG("%s, crtc=%p fb=%p", omap_plane->name, new_state->crtc,
new_state->fb);
@@ -80,9 +98,9 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
/* update scanout: */
omap_framebuffer_update_scanout(new_state->fb, new_state, &info);
- DBG("%dx%d -> %dx%d (%d)", info.width, info.height,
- info.out_width, info.out_height,
- info.screen_width);
+ DBG("%s: %dx%d -> %dx%d (%d)",
+ new_omap_state->overlay->name, info.width, info.height,
+ info.out_width, info.out_height, info.screen_width);
DBG("%d,%d %pad %pad", info.pos_x, info.pos_y,
&info.paddr, &info.p_uv_addr);
@@ -105,55 +123,66 @@ static void omap_plane_atomic_disable(struct drm_plane *plane,
{
struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
plane);
- struct omap_drm_private *priv = plane->dev->dev_private;
- struct omap_plane *omap_plane = to_omap_plane(plane);
- enum omap_plane_id ovl_id = omap_plane->overlay->overlay_id;
+ struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
+ plane);
+ struct omap_plane_state *new_omap_state;
+ struct omap_plane_state *old_omap_state;
+
+ new_omap_state = to_omap_plane_state(new_state);
+ old_omap_state = to_omap_plane_state(old_state);
+
+ if (!old_omap_state->overlay)
+ return;
new_state->rotation = DRM_MODE_ROTATE_0;
- new_state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : omap_plane->id;
+ new_state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY
+ ? 0 : old_omap_state->overlay->overlay_id;
- dispc_ovl_enable(priv->dispc, ovl_id, false);
+ omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
+ new_omap_state->overlay = NULL;
}
+#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
static int omap_plane_atomic_check(struct drm_plane *plane,
struct drm_atomic_state *state)
{
struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
plane);
+ struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state,
+ plane);
+ struct drm_crtc *crtc;
struct omap_drm_private *priv = plane->dev->dev_private;
+ struct omap_plane_state *omap_state = to_omap_plane_state(new_plane_state);
+ struct omap_global_state *omap_overlay_global_state;
+ u32 crtc_mask;
+ u32 fourcc;
+ u32 caps = 0;
+ bool new_hw_overlay = false;
+ int min_scale, max_scale;
+ int ret;
struct drm_crtc_state *crtc_state;
u16 width, height;
u32 width_fp, height_fp;
- if (!new_plane_state->fb)
- return 0;
+ omap_overlay_global_state = omap_get_global_state(state);
+ if (IS_ERR(omap_overlay_global_state))
+ return PTR_ERR(omap_overlay_global_state);
+ DBG("%s: omap_overlay_global_state: %p", plane->name,
+ omap_overlay_global_state);
dispc_ovl_get_max_size(priv->dispc, &width, &height);
width_fp = width << 16;
height_fp = height << 16;
- /* crtc should only be NULL when disabling (i.e., !new_plane_state->fb) */
- if (WARN_ON(!new_plane_state->crtc))
+ crtc = new_plane_state->crtc ? new_plane_state->crtc : plane->state->crtc;
+ if (!crtc)
return 0;
- crtc_state = drm_atomic_get_existing_crtc_state(state,
- new_plane_state->crtc);
+ crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
/* we should have a crtc state if the plane is attached to a crtc */
if (WARN_ON(!crtc_state))
return 0;
- if (!crtc_state->enable)
- return 0;
-
- if (new_plane_state->crtc_x < 0 || new_plane_state->crtc_y < 0)
- return -EINVAL;
-
- if (new_plane_state->crtc_x + new_plane_state->crtc_w > crtc_state->adjusted_mode.hdisplay)
- return -EINVAL;
-
- if (new_plane_state->crtc_y + new_plane_state->crtc_h > crtc_state->adjusted_mode.vdisplay)
- return -EINVAL;
-
/* Make sure dimensions are within bounds. */
if (new_plane_state->src_h > height_fp || new_plane_state->crtc_h > height)
return -EINVAL;
@@ -161,9 +190,81 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
if (new_plane_state->src_w > width_fp || new_plane_state->crtc_w > width)
return -EINVAL;
- if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
- !omap_framebuffer_supports_rotation(new_plane_state->fb))
- return -EINVAL;
+
+ /*
+ * Note: these are just sanity checks to filter out totally bad scaling
+ * factors. The real limits must be calculated case by case, and
+ * unfortunately we currently do those checks only at the commit
+ * phase in dispc.
+ */
+ min_scale = FRAC_16_16(1, 8);
+ max_scale = FRAC_16_16(8, 1);
+
+ ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
+ min_scale, max_scale,
+ true, true);
+ if (ret)
+ return ret;
+
+ DBG("%s: check (%d -> %d)", plane->name,
+ old_plane_state->visible, new_plane_state->visible);
+
+ if (new_plane_state->visible) {
+ if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
+ !omap_framebuffer_supports_rotation(new_plane_state->fb))
+ return -EINVAL;
+
+ if ((new_plane_state->src_w >> 16) != new_plane_state->crtc_w ||
+ (new_plane_state->src_h >> 16) != new_plane_state->crtc_h)
+ caps |= OMAP_DSS_OVL_CAP_SCALE;
+
+ fourcc = new_plane_state->fb->format->format;
+ crtc_mask = drm_crtc_mask(new_plane_state->crtc);
+
+ /*
+ * (re)allocate hw overlay if we don't have one or
+ * there is a caps mismatch
+ */
+ if (!omap_state->overlay ||
+ (caps & ~omap_state->overlay->caps)) {
+ new_hw_overlay = true;
+ } else {
+ /* check if allowed on crtc */
+ if (!(omap_state->overlay->possible_crtcs & crtc_mask))
+ new_hw_overlay = true;
+
+ /* check supported format */
+ if (!dispc_ovl_color_mode_supported(priv->dispc,
+ omap_state->overlay->overlay_id,
+ fourcc))
+ new_hw_overlay = true;
+ }
+
+ if (new_hw_overlay) {
+ struct omap_hw_overlay *old_ovl = omap_state->overlay;
+ struct omap_hw_overlay *new_ovl = NULL;
+
+ omap_overlay_release(state, plane, old_ovl);
+
+ ret = omap_overlay_assign(state, plane, caps,
+ fourcc, crtc_mask, &new_ovl);
+ if (ret) {
+ DBG("%s: failed to assign hw_overlay(s)!",
+ plane->name);
+ omap_state->overlay = NULL;
+ return ret;
+ }
+
+ omap_state->overlay = new_ovl;
+ }
+ } else {
+ omap_overlay_release(state, plane, omap_state->overlay);
+ omap_state->overlay = NULL;
+ }
+
+ if (omap_state->overlay)
+ DBG("plane: %s overlay_id: %d", plane->name,
+ omap_state->overlay->overlay_id);
return 0;
}
@@ -230,7 +331,7 @@ static void omap_plane_reset(struct drm_plane *plane)
* plane.
*/
plane->state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY
- ? 0 : omap_plane->overlay->overlay_id;
+ ? 0 : omap_plane->id;
plane->state->color_encoding = DRM_COLOR_YCBCR_BT601;
plane->state->color_range = DRM_COLOR_YCBCR_FULL_RANGE;
}
@@ -340,13 +441,12 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
omap_plane->id = idx;
omap_plane->name = plane_id_to_name[idx];
- omap_plane->overlay = priv->overlays[idx];
DBG("%s: type=%d", omap_plane->name, type);
DBG(" omap_plane->id: %d", omap_plane->id);
DBG(" crtc_mask: 0x%04x", possible_crtcs);
- formats = dispc_ovl_get_color_modes(priv->dispc, omap_plane->overlay->overlay_id);
+ formats = dispc_ovl_get_color_modes(priv->dispc, omap_plane->id);
for (nformats = 0; formats[nformats]; ++nformats)
;
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v5 6/8] drm/omap: dynamically assign hw overlays to planes
2021-09-23 7:06 ` [PATCH v5 6/8] drm/omap: dynamically assign hw overlays to planes Neil Armstrong
@ 2021-10-12 13:34 ` Tomi Valkeinen
2021-10-12 14:45 ` Neil Armstrong
0 siblings, 1 reply; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-12 13:34 UTC (permalink / raw)
To: Neil Armstrong
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 23/09/2021 10:06, Neil Armstrong wrote:
> From: Benoit Parrot <bparrot@ti.com>
>
> (re)assign the hw overlays to planes based on required caps, and to
> handle situations where we could not modify an in-use plane.
>
> This means all planes advertise the superset of formats and properties.
> Userspace must (as always) use atomic TEST_ONLY step for atomic updates,
> as not all planes may be available for use on every frame.
>
> The mapping of hwoverlays to plane is stored in omap_global_state, so
> that state updates are atomically committed in the same way that
> plane/etc state updates are managed. This is needed because the
> omap_plane_state keeps a pointer to the hwoverlay, and we don't want
> global state to become out of sync with the plane state if an atomic
> update fails, we hit deadlock/ backoff scenario, etc. The use of
> global_state_lock keeps multiple parallel updates which both re-assign
> hwoverlays properly serialized.
>
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
> drivers/gpu/drm/omapdrm/omap_drv.h | 3 +
> drivers/gpu/drm/omapdrm/omap_overlay.c | 140 ++++++++++++++++++++
> drivers/gpu/drm/omapdrm/omap_overlay.h | 9 ++
> drivers/gpu/drm/omapdrm/omap_plane.c | 170 ++++++++++++++++++++-----
> 4 files changed, 287 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
> index 280cdd27bc8e..2d5928f05a23 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -49,6 +49,9 @@ struct omap_drm_pipeline {
> #define to_omap_global_state(x) container_of(x, struct omap_global_state, base)
> struct omap_global_state {
> struct drm_private_state base;
> +
> + /* global atomic state of assignment between overlays and planes */
> + struct drm_plane *hwoverlay_to_plane[8];
> };
>
> struct omap_drm_private {
> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
> index 2b1416d2aad2..f1a23c2203aa 100644
> --- a/drivers/gpu/drm/omapdrm/omap_overlay.c
> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
> @@ -21,6 +21,146 @@ static const char * const overlay_id_to_name[] = {
> [OMAP_DSS_VIDEO3] = "vid3",
> };
>
> +static struct omap_hw_overlay *
> +omap_plane_find_free_overlay(struct drm_device *dev,
> + struct drm_plane *hwoverlay_to_plane[],
> + u32 caps, u32 fourcc, u32 crtc_mask)
> +{
> + struct omap_drm_private *priv = dev->dev_private;
> + int i;
> +
> + DBG("caps: %x fourcc: %x crtc: %x", caps, fourcc, crtc_mask);
> +
> + for (i = 0; i < priv->num_ovls; i++) {
> + struct omap_hw_overlay *cur = priv->overlays[i];
> +
> + DBG("%d: id: %d cur->caps: %x cur->crtc: %x",
> + cur->idx, cur->overlay_id, cur->caps, cur->possible_crtcs);
> +
> + /* skip if already in-use */
> + if (hwoverlay_to_plane[cur->idx])
> + continue;
> +
> + /* check if allowed on crtc */
> + if (!(cur->possible_crtcs & crtc_mask))
> + continue;
> +
> + /* skip if doesn't support some required caps: */
> + if (caps & ~cur->caps)
> + continue;
> +
> + /* check supported format */
> + if (!dispc_ovl_color_mode_supported(priv->dispc,
> + cur->overlay_id, fourcc))
> + continue;
> +
> + return cur;
> + }
> +
> + DBG("no match");
> + return NULL;
> +}
> +
> +int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
> + u32 caps, u32 fourcc, u32 crtc_mask,
> + struct omap_hw_overlay **overlay)
> +{
> + struct omap_drm_private *priv = s->dev->dev_private;
> + struct omap_global_state *new_global_state, *old_global_state;
> + struct drm_plane **overlay_map;
> + struct omap_hw_overlay *ovl;
> +
> + new_global_state = omap_get_global_state(s);
> + if (IS_ERR(new_global_state))
> + return PTR_ERR(new_global_state);
> +
> + /*
> + * grab old_state after omap_get_global_state(),
> + * since now we hold lock:
> + */
> + old_global_state = omap_get_existing_global_state(priv);
> + DBG("new_global_state: %p old_global_state: %p",
> + new_global_state, old_global_state);
> +
> + overlay_map = new_global_state->hwoverlay_to_plane;
> +
> + if (!*overlay) {
> + ovl = omap_plane_find_free_overlay(s->dev, overlay_map,
> + caps, fourcc, crtc_mask);
> + if (!ovl)
> + return -ENOMEM;
> +
> + ovl->possible_crtcs = crtc_mask;
> + overlay_map[ovl->idx] = plane;
> + *overlay = ovl;
> +
> + DBG("%s: assign to plane %s caps %x on crtc %x",
> + (*overlay)->name, plane->name, caps, crtc_mask);
> + }
> +
> + return 0;
> +}
Why would one call this function with overlay == NULL? What does the
function do in that case?
> +
> +void omap_overlay_release(struct drm_atomic_state *s,
> + struct drm_plane *plane,
> + struct omap_hw_overlay *overlay)
It feels odd to pass both plane and overlay here. If we're unassigning
(is that a verb? =) the overlay, isn't it enough to just pass either the
plane or the overlay?
> +{
> + struct omap_global_state *state = omap_get_global_state(s);
> + struct drm_plane **overlay_map = state->hwoverlay_to_plane;
> +
> + if (!overlay)
> + return;
> +
> + if (WARN_ON(!overlay_map[overlay->idx]))
> + return;
> + /*
> + * Check that the overlay we are releasing is actually
> + * assigned to the plane we are trying to release it from.
> + */
> + if (overlay_map[overlay->idx] == plane) {
> + DBG("%s: release from plane %s", overlay->name, plane->name);
> +
> + overlay_map[overlay->idx] = NULL;
> + }
So it's normal that overlay_map[overlay->idx] != plane? When does that
happen?
> +}
> +
> +void omap_overlay_disable(struct drm_atomic_state *s,
> + struct drm_plane *plane,
> + struct omap_hw_overlay *overlay)
> +{
> + struct omap_drm_private *priv = s->dev->dev_private;
> + struct drm_plane **overlay_map;
> + struct omap_global_state *old_state;
> +
> + old_state = omap_get_existing_global_state(priv);
> + overlay_map = old_state->hwoverlay_to_plane;
> +
> + if (!overlay)
> + return;
> +
You can move the if above to the beginning of the func.
> + /*
> + * Check that the overlay we are trying to disable has not
> + * been re-assigned to another plane already
> + */
> + if (!overlay_map[overlay->idx]) {
> + DBG("%s: on %s disabled", overlay->name, plane->name);
> +
> + /* disable the overlay */
> + dispc_ovl_enable(priv->dispc, overlay->overlay_id, false);
> +
> + /*
> + * Since we are disabling this overlay in this
> + * atomic cycle we can reset the available crtcs
> + * it can be used on
> + */
> + overlay->possible_crtcs = (1 << priv->num_pipes) - 1;
This is changing data in the overlay struct itself. Shouldn't the
mutable data be in the atomic state?
I'm also a bit confused on what the "possible_crtcs" is. But I think
it's either a bitmask of all the crtcs when the overlay is free, or a
mask of a single crtc when allocated.
I think a variable that's either 0 when the overlay is not assigned, or
the mask of the crtc when in use, would be more clear. Also with some
other name (active_crtc?).
> + }
> +
> + /*
> + * Otherwise the overlay is still in use so leave it alone
> + */
> +}
This function also has interesting behavior, possibly not disabling the
hw overlay. I think these new exposed overlay functions could use a
comment above each of them, explaining what they do.
> +
> static void omap_overlay_destroy(struct omap_hw_overlay *overlay)
> {
> kfree(overlay);
> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
> index 892fecb67adb..d5033ee481c2 100644
> --- a/drivers/gpu/drm/omapdrm/omap_overlay.h
> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
> @@ -28,4 +28,13 @@ struct omap_hw_overlay {
>
> int omap_hwoverlays_init(struct omap_drm_private *priv);
> void omap_hwoverlays_destroy(struct omap_drm_private *priv);
> +int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
> + u32 caps, u32 fourcc, u32 crtc_mask,
> + struct omap_hw_overlay **overlay);
> +void omap_overlay_release(struct drm_atomic_state *s,
> + struct drm_plane *plane,
> + struct omap_hw_overlay *overlay);
> +void omap_overlay_disable(struct drm_atomic_state *s,
> + struct drm_plane *plane,
> + struct omap_hw_overlay *overlay);
> #endif /* __OMAPDRM_OVERLAY_H__ */
> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
> index bda794b4c915..4b400a8bfe9e 100644
> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
> @@ -8,6 +8,7 @@
> #include <drm/drm_atomic_helper.h>
> #include <drm/drm_gem_atomic_helper.h>
> #include <drm/drm_plane_helper.h>
> +#include <drm/drm_fourcc.h>
>
> #include "omap_dmm_tiler.h"
> #include "omap_drv.h"
> @@ -21,6 +22,8 @@
> struct omap_plane_state {
> /* Must be first. */
> struct drm_plane_state base;
> +
> + struct omap_hw_overlay *overlay;
> };
>
> #define to_omap_plane(x) container_of(x, struct omap_plane, base)
> @@ -29,8 +32,6 @@ struct omap_plane {
> struct drm_plane base;
> enum omap_plane_id id;
> const char *name;
> -
> - struct omap_hw_overlay *overlay;
> };
>
> static int omap_plane_prepare_fb(struct drm_plane *plane,
> @@ -58,10 +59,27 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
> struct omap_plane *omap_plane = to_omap_plane(plane);
> struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
> plane);
> - enum omap_plane_id ovl_id = omap_plane->overlay->overlay_id;
> + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
> + plane);
> + struct omap_plane_state *new_omap_state;
> + struct omap_plane_state *old_omap_state;
> struct omap_overlay_info info;
> + enum omap_plane_id ovl_id;
> int ret;
>
> + new_omap_state = to_omap_plane_state(new_state);
> + old_omap_state = to_omap_plane_state(old_state);
> +
> + /* Cleanup previously held overlay if needed */
> + omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
> +
> + if (!new_omap_state->overlay) {
> + DBG("[PLANE:%d:%s] overlay_id: ??? (%p)", plane->base.id, plane->name,
> + new_omap_state->overlay);
I wonder what the ??? means here.
Already in earlier patches I wondered if the DBG prints were good or
not, but I thought I'll comment on those after I can run this and see
what they actually print. But some of them felt like debug prints used
during development, not something to leave in the production code (at
least in the form they were).
> + return;
> + }
> +
> + ovl_id = new_omap_state->overlay->overlay_id;
> DBG("%s, crtc=%p fb=%p", omap_plane->name, new_state->crtc,
> new_state->fb);
>
> @@ -80,9 +98,9 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
> /* update scanout: */
> omap_framebuffer_update_scanout(new_state->fb, new_state, &info);
>
> - DBG("%dx%d -> %dx%d (%d)", info.width, info.height,
> - info.out_width, info.out_height,
> - info.screen_width);
> + DBG("%s: %dx%d -> %dx%d (%d)",
> + new_omap_state->overlay->name, info.width, info.height,
> + info.out_width, info.out_height, info.screen_width);
> DBG("%d,%d %pad %pad", info.pos_x, info.pos_y,
> &info.paddr, &info.p_uv_addr);
>
> @@ -105,55 +123,66 @@ static void omap_plane_atomic_disable(struct drm_plane *plane,
> {
> struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
> plane);
> - struct omap_drm_private *priv = plane->dev->dev_private;
> - struct omap_plane *omap_plane = to_omap_plane(plane);
> - enum omap_plane_id ovl_id = omap_plane->overlay->overlay_id;
> + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
> + plane);
> + struct omap_plane_state *new_omap_state;
> + struct omap_plane_state *old_omap_state;
> +
> + new_omap_state = to_omap_plane_state(new_state);
> + old_omap_state = to_omap_plane_state(old_state);
> +
> + if (!old_omap_state->overlay)
> + return;
>
> new_state->rotation = DRM_MODE_ROTATE_0;
> - new_state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : omap_plane->id;
> + new_state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY
> + ? 0 : old_omap_state->overlay->overlay_id;
I'm not sure if I'm right here, but... doesn't the above mean that the
plane's zpos can change, depending on which hw overlay it happened to use?
>
> - dispc_ovl_enable(priv->dispc, ovl_id, false);
> + omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
> + new_omap_state->overlay = NULL;
> }
>
> +#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
> static int omap_plane_atomic_check(struct drm_plane *plane,
> struct drm_atomic_state *state)
> {
> struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
> plane);
> + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state,
> + plane);
> + struct drm_crtc *crtc;
> struct omap_drm_private *priv = plane->dev->dev_private;
> + struct omap_plane_state *omap_state = to_omap_plane_state(new_plane_state);
> + struct omap_global_state *omap_overlay_global_state;
> + u32 crtc_mask;
> + u32 fourcc;
> + u32 caps = 0;
> + bool new_hw_overlay = false;
> + int min_scale, max_scale;
> + int ret;
> struct drm_crtc_state *crtc_state;
> u16 width, height;
> u32 width_fp, height_fp;
>
> - if (!new_plane_state->fb)
> - return 0;
> + omap_overlay_global_state = omap_get_global_state(state);
> + if (IS_ERR(omap_overlay_global_state))
> + return PTR_ERR(omap_overlay_global_state);
> + DBG("%s: omap_overlay_global_state: %p", plane->name,
> + omap_overlay_global_state);
>
> dispc_ovl_get_max_size(priv->dispc, &width, &height);
> width_fp = width << 16;
> height_fp = height << 16;
>
> - /* crtc should only be NULL when disabling (i.e., !new_plane_state->fb) */
> - if (WARN_ON(!new_plane_state->crtc))
> + crtc = new_plane_state->crtc ? new_plane_state->crtc : plane->state->crtc;
> + if (!crtc)
> return 0;
>
> - crtc_state = drm_atomic_get_existing_crtc_state(state,
> - new_plane_state->crtc);
> + crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
> /* we should have a crtc state if the plane is attached to a crtc */
> if (WARN_ON(!crtc_state))
> return 0;
>
> - if (!crtc_state->enable)
> - return 0;
> -
> - if (new_plane_state->crtc_x < 0 || new_plane_state->crtc_y < 0)
> - return -EINVAL;
> -
> - if (new_plane_state->crtc_x + new_plane_state->crtc_w > crtc_state->adjusted_mode.hdisplay)
> - return -EINVAL;
> -
> - if (new_plane_state->crtc_y + new_plane_state->crtc_h > crtc_state->adjusted_mode.vdisplay)
> - return -EINVAL;
> -
> /* Make sure dimensions are within bounds. */
> if (new_plane_state->src_h > height_fp || new_plane_state->crtc_h > height)
> return -EINVAL;
> @@ -161,9 +190,81 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
> if (new_plane_state->src_w > width_fp || new_plane_state->crtc_w > width)
> return -EINVAL;
>
> - if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
> - !omap_framebuffer_supports_rotation(new_plane_state->fb))
> - return -EINVAL;
> +
> + /*
> + * Note: these are just sanity checks to filter out totally bad scaling
> + * factors. The real limits must be calculated case by case, and
> + * unfortunately we currently do those checks only at the commit
> + * phase in dispc.
> + */
> + min_scale = FRAC_16_16(1, 8);
> + max_scale = FRAC_16_16(8, 1);
> +
> + ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
> + min_scale, max_scale,
> + true, true);
This piece here feels a bit out of context (wrt. to this patch). Why do
we need it here, when adding support to hw overlays?
And I think it's fine to use the above helper, but maybe it can be in a
separate patch earlier?
> + if (ret)
> + return ret;
> +
> + DBG("%s: check (%d -> %d)", plane->name,
> + old_plane_state->visible, new_plane_state->visible);
Here's an example of the debug prints I mentioned earlier. I think this
prints:
"GFX: check (1 -> 0)"
I'm fine with terse debug prints, but... maybe something like "visible 1
-> 0" would be much better? =)
> + if (new_plane_state->visible) {
> + if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
> + !omap_framebuffer_supports_rotation(new_plane_state->fb))
> + return -EINVAL;
> +
> + if ((new_plane_state->src_w >> 16) != new_plane_state->crtc_w ||
> + (new_plane_state->src_h >> 16) != new_plane_state->crtc_h)
> + caps |= OMAP_DSS_OVL_CAP_SCALE;
> +
> + fourcc = new_plane_state->fb->format->format;
> + crtc_mask = drm_crtc_mask(new_plane_state->crtc);
> +
> + /*
> + * (re)allocate hw overlay if we don't have one or
> + * there is a caps mismatch
> + */
> + if (!omap_state->overlay ||
> + (caps & ~omap_state->overlay->caps)) {
> + new_hw_overlay = true;
> + } else {
> + /* check if allowed on crtc */
> + if (!(omap_state->overlay->possible_crtcs & crtc_mask))
> + new_hw_overlay = true;
> +
> + /* check supported format */
> + if (!dispc_ovl_color_mode_supported(priv->dispc,
> + omap_state->overlay->overlay_id,
> + fourcc))
> + new_hw_overlay = true;
> + }
> +
> + if (new_hw_overlay) {
> + struct omap_hw_overlay *old_ovl = omap_state->overlay;
> + struct omap_hw_overlay *new_ovl = NULL;
> +
> + omap_overlay_release(state, plane, old_ovl);
> +
> + ret = omap_overlay_assign(state, plane, caps,
> + fourcc, crtc_mask, &new_ovl);
> + if (ret) {
> + DBG("%s: failed to assign hw_overlay(s)!",
> + plane->name);
> + omap_state->overlay = NULL;
> + return ret;
> + }
> +
> + omap_state->overlay = new_ovl;
> + }
> + } else {
> + omap_overlay_release(state, plane, omap_state->overlay);
> + omap_state->overlay = NULL;
> + }
> +
> + if (omap_state->overlay)
> + DBG("plane: %s overlay_id: %d", plane->name,
> + omap_state->overlay->overlay_id);
>
> return 0;
> }
> @@ -230,7 +331,7 @@ static void omap_plane_reset(struct drm_plane *plane)
> * plane.
> */
> plane->state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY
> - ? 0 : omap_plane->overlay->overlay_id;
> + ? 0 : omap_plane->id;
Hmm... On plane reset we now set the zpos to plane->id, but on disable
we reset zpos to overlay->id. And before this patch we set the vice
versa. I don't follow.
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 6/8] drm/omap: dynamically assign hw overlays to planes
2021-10-12 13:34 ` Tomi Valkeinen
@ 2021-10-12 14:45 ` Neil Armstrong
0 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-10-12 14:45 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot
On 12/10/2021 15:34, Tomi Valkeinen wrote:
> On 23/09/2021 10:06, Neil Armstrong wrote:
>> From: Benoit Parrot <bparrot@ti.com>
>>
>> (re)assign the hw overlays to planes based on required caps, and to
>> handle situations where we could not modify an in-use plane.
>>
>> This means all planes advertise the superset of formats and properties.
>> Userspace must (as always) use atomic TEST_ONLY step for atomic updates,
>> as not all planes may be available for use on every frame.
>>
>> The mapping of hwoverlays to plane is stored in omap_global_state, so
>> that state updates are atomically committed in the same way that
>> plane/etc state updates are managed. This is needed because the
>> omap_plane_state keeps a pointer to the hwoverlay, and we don't want
>> global state to become out of sync with the plane state if an atomic
>> update fails, we hit deadlock/ backoff scenario, etc. The use of
>> global_state_lock keeps multiple parallel updates which both re-assign
>> hwoverlays properly serialized.
>>
>> Signed-off-by: Benoit Parrot <bparrot@ti.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> drivers/gpu/drm/omapdrm/omap_drv.h | 3 +
>> drivers/gpu/drm/omapdrm/omap_overlay.c | 140 ++++++++++++++++++++
>> drivers/gpu/drm/omapdrm/omap_overlay.h | 9 ++
>> drivers/gpu/drm/omapdrm/omap_plane.c | 170 ++++++++++++++++++++-----
>> 4 files changed, 287 insertions(+), 35 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
>> index 280cdd27bc8e..2d5928f05a23 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
>> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
>> @@ -49,6 +49,9 @@ struct omap_drm_pipeline {
>> #define to_omap_global_state(x) container_of(x, struct omap_global_state, base)
>> struct omap_global_state {
>> struct drm_private_state base;
>> +
>> + /* global atomic state of assignment between overlays and planes */
>> + struct drm_plane *hwoverlay_to_plane[8];
>> };
>> struct omap_drm_private {
>> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
>> index 2b1416d2aad2..f1a23c2203aa 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_overlay.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
>> @@ -21,6 +21,146 @@ static const char * const overlay_id_to_name[] = {
>> [OMAP_DSS_VIDEO3] = "vid3",
>> };
>> +static struct omap_hw_overlay *
>> +omap_plane_find_free_overlay(struct drm_device *dev,
>> + struct drm_plane *hwoverlay_to_plane[],
>> + u32 caps, u32 fourcc, u32 crtc_mask)
>> +{
>> + struct omap_drm_private *priv = dev->dev_private;
>> + int i;
>> +
>> + DBG("caps: %x fourcc: %x crtc: %x", caps, fourcc, crtc_mask);
>> +
>> + for (i = 0; i < priv->num_ovls; i++) {
>> + struct omap_hw_overlay *cur = priv->overlays[i];
>> +
>> + DBG("%d: id: %d cur->caps: %x cur->crtc: %x",
>> + cur->idx, cur->overlay_id, cur->caps, cur->possible_crtcs);
>> +
>> + /* skip if already in-use */
>> + if (hwoverlay_to_plane[cur->idx])
>> + continue;
>> +
>> + /* check if allowed on crtc */
>> + if (!(cur->possible_crtcs & crtc_mask))
>> + continue;
>> +
>> + /* skip if doesn't support some required caps: */
>> + if (caps & ~cur->caps)
>> + continue;
>> +
>> + /* check supported format */
>> + if (!dispc_ovl_color_mode_supported(priv->dispc,
>> + cur->overlay_id, fourcc))
>> + continue;
>> +
>> + return cur;
>> + }
>> +
>> + DBG("no match");
>> + return NULL;
>> +}
>> +
>> +int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
>> + u32 caps, u32 fourcc, u32 crtc_mask,
>> + struct omap_hw_overlay **overlay)
>> +{
>> + struct omap_drm_private *priv = s->dev->dev_private;
>> + struct omap_global_state *new_global_state, *old_global_state;
>> + struct drm_plane **overlay_map;
>> + struct omap_hw_overlay *ovl;
>> +
>> + new_global_state = omap_get_global_state(s);
>> + if (IS_ERR(new_global_state))
>> + return PTR_ERR(new_global_state);
>> +
>> + /*
>> + * grab old_state after omap_get_global_state(),
>> + * since now we hold lock:
>> + */
>> + old_global_state = omap_get_existing_global_state(priv);
>> + DBG("new_global_state: %p old_global_state: %p",
>> + new_global_state, old_global_state);
>> +
>> + overlay_map = new_global_state->hwoverlay_to_plane;
>> +
>> + if (!*overlay) {
>> + ovl = omap_plane_find_free_overlay(s->dev, overlay_map,
>> + caps, fourcc, crtc_mask);
>> + if (!ovl)
>> + return -ENOMEM;
>> +
>> + ovl->possible_crtcs = crtc_mask;
>> + overlay_map[ovl->idx] = plane;
>> + *overlay = ovl;
>> +
>> + DBG("%s: assign to plane %s caps %x on crtc %x",
>> + (*overlay)->name, plane->name, caps, crtc_mask);
>> + }
>> +
>> + return 0;
>> +}
>
> Why would one call this function with overlay == NULL? What does the function do in that case?
This function is only called with !*overlay, no ide why it would be called with *overlay != NULL...
I'll try to simplify this.
>
>> +
>> +void omap_overlay_release(struct drm_atomic_state *s,
>> + struct drm_plane *plane,
>> + struct omap_hw_overlay *overlay)
>
> It feels odd to pass both plane and overlay here. If we're unassigning (is that a verb? =) the overlay, isn't it enough to just pass either the plane or the overlay?
Passing the overlay is necessary when having 2 overlays for a plane, but the plane parameter is definitely
unneeded here.
>
>> +{
>> + struct omap_global_state *state = omap_get_global_state(s);
>> + struct drm_plane **overlay_map = state->hwoverlay_to_plane;
>> +
>> + if (!overlay)
>> + return;
>> +
>> + if (WARN_ON(!overlay_map[overlay->idx]))
>> + return;
>> + /*
>> + * Check that the overlay we are releasing is actually
>> + * assigned to the plane we are trying to release it from.
>> + */
>> + if (overlay_map[overlay->idx] == plane) {
>> + DBG("%s: release from plane %s", overlay->name, plane->name);
>> +
>> + overlay_map[overlay->idx] = NULL;
>> + }
>
> So it's normal that overlay_map[overlay->idx] != plane? When does that happen?
It's impossible since the overlay is taken from the plane state, will simplify this,
remove the plane parameter and remove the unnecessary checks.
>
>> +}
>> +
>> +void omap_overlay_disable(struct drm_atomic_state *s,
>> + struct drm_plane *plane,
>> + struct omap_hw_overlay *overlay)
>> +{
>> + struct omap_drm_private *priv = s->dev->dev_private;
>> + struct drm_plane **overlay_map;
>> + struct omap_global_state *old_state;
>> +
>> + old_state = omap_get_existing_global_state(priv);
>> + overlay_map = old_state->hwoverlay_to_plane;
>> +
>> + if (!overlay)
>> + return;
>> +
>
> You can move the if above to the beginning of the func.
>
>> + /*
>> + * Check that the overlay we are trying to disable has not
>> + * been re-assigned to another plane already
>> + */
>> + if (!overlay_map[overlay->idx]) {
>> + DBG("%s: on %s disabled", overlay->name, plane->name);
>> +
>> + /* disable the overlay */
>> + dispc_ovl_enable(priv->dispc, overlay->overlay_id, false);
>> +
>> + /*
>> + * Since we are disabling this overlay in this
>> + * atomic cycle we can reset the available crtcs
>> + * it can be used on
>> + */
>> + overlay->possible_crtcs = (1 << priv->num_pipes) - 1;
>
> This is changing data in the overlay struct itself. Shouldn't the mutable data be in the atomic state?
>
> I'm also a bit confused on what the "possible_crtcs" is. But I think it's either a bitmask of all the crtcs when the overlay is free, or a mask of a single crtc when allocated.
>
> I think a variable that's either 0 when the overlay is not assigned, or the mask of the crtc when in use, would be more clear. Also with some other name (active_crtc?).
I dropped entirely this possible_crtcs.
>
>> + }
>> +
>> + /*
>> + * Otherwise the overlay is still in use so leave it alone
>> + */
>> +}
>
> This function also has interesting behavior, possibly not disabling the hw overlay. I think these new exposed overlay functions could use a comment above each of them, explaining what they do.
I renamed this function to "omap_overlay_update_state()" which will disable an overlay if not more used.
This name looks much more appropriate.
>
>> +
>> static void omap_overlay_destroy(struct omap_hw_overlay *overlay)
>> {
>> kfree(overlay);
>> diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
>> index 892fecb67adb..d5033ee481c2 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_overlay.h
>> +++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
>> @@ -28,4 +28,13 @@ struct omap_hw_overlay {
>> int omap_hwoverlays_init(struct omap_drm_private *priv);
>> void omap_hwoverlays_destroy(struct omap_drm_private *priv);
>> +int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
>> + u32 caps, u32 fourcc, u32 crtc_mask,
>> + struct omap_hw_overlay **overlay);
>> +void omap_overlay_release(struct drm_atomic_state *s,
>> + struct drm_plane *plane,
>> + struct omap_hw_overlay *overlay);
>> +void omap_overlay_disable(struct drm_atomic_state *s,
>> + struct drm_plane *plane,
>> + struct omap_hw_overlay *overlay);
>> #endif /* __OMAPDRM_OVERLAY_H__ */
>> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
>> index bda794b4c915..4b400a8bfe9e 100644
>> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
>> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
>> @@ -8,6 +8,7 @@
>> #include <drm/drm_atomic_helper.h>
>> #include <drm/drm_gem_atomic_helper.h>
>> #include <drm/drm_plane_helper.h>
>> +#include <drm/drm_fourcc.h>
>> #include "omap_dmm_tiler.h"
>> #include "omap_drv.h"
>> @@ -21,6 +22,8 @@
>> struct omap_plane_state {
>> /* Must be first. */
>> struct drm_plane_state base;
>> +
>> + struct omap_hw_overlay *overlay;
>> };
>> #define to_omap_plane(x) container_of(x, struct omap_plane, base)
>> @@ -29,8 +32,6 @@ struct omap_plane {
>> struct drm_plane base;
>> enum omap_plane_id id;
>> const char *name;
>> -
>> - struct omap_hw_overlay *overlay;
>> };
>> static int omap_plane_prepare_fb(struct drm_plane *plane,
>> @@ -58,10 +59,27 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
>> struct omap_plane *omap_plane = to_omap_plane(plane);
>> struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
>> plane);
>> - enum omap_plane_id ovl_id = omap_plane->overlay->overlay_id;
>> + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
>> + plane);
>> + struct omap_plane_state *new_omap_state;
>> + struct omap_plane_state *old_omap_state;
>> struct omap_overlay_info info;
>> + enum omap_plane_id ovl_id;
>> int ret;
>> + new_omap_state = to_omap_plane_state(new_state);
>> + old_omap_state = to_omap_plane_state(old_state);
>> +
>> + /* Cleanup previously held overlay if needed */
>> + omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
>> +
>> + if (!new_omap_state->overlay) {
>> + DBG("[PLANE:%d:%s] overlay_id: ??? (%p)", plane->base.id, plane->name,
>> + new_omap_state->overlay);
>
> I wonder what the ??? means here.
>
> Already in earlier patches I wondered if the DBG prints were good or not, but I thought I'll comment on those after I can run this and see what they actually print. But some of them felt like debug prints used during development, not something to leave in the production code (at least in the form they were).
I changed the print to something more interesting.
>
>> + return;
>> + }
>> +
>> + ovl_id = new_omap_state->overlay->overlay_id;
>> DBG("%s, crtc=%p fb=%p", omap_plane->name, new_state->crtc,
>> new_state->fb);
>> @@ -80,9 +98,9 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
>> /* update scanout: */
>> omap_framebuffer_update_scanout(new_state->fb, new_state, &info);
>> - DBG("%dx%d -> %dx%d (%d)", info.width, info.height,
>> - info.out_width, info.out_height,
>> - info.screen_width);
>> + DBG("%s: %dx%d -> %dx%d (%d)",
>> + new_omap_state->overlay->name, info.width, info.height,
>> + info.out_width, info.out_height, info.screen_width);
>> DBG("%d,%d %pad %pad", info.pos_x, info.pos_y,
>> &info.paddr, &info.p_uv_addr);
>> @@ -105,55 +123,66 @@ static void omap_plane_atomic_disable(struct drm_plane *plane,
>> {
>> struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state,
>> plane);
>> - struct omap_drm_private *priv = plane->dev->dev_private;
>> - struct omap_plane *omap_plane = to_omap_plane(plane);
>> - enum omap_plane_id ovl_id = omap_plane->overlay->overlay_id;
>> + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state,
>> + plane);
>> + struct omap_plane_state *new_omap_state;
>> + struct omap_plane_state *old_omap_state;
>> +
>> + new_omap_state = to_omap_plane_state(new_state);
>> + old_omap_state = to_omap_plane_state(old_state);
>> +
>> + if (!old_omap_state->overlay)
>> + return;
>> new_state->rotation = DRM_MODE_ROTATE_0;
>> - new_state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY ? 0 : omap_plane->id;
>> + new_state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY
>> + ? 0 : old_omap_state->overlay->overlay_id;
>
> I'm not sure if I'm right here, but... doesn't the above mean that the plane's zpos can change, depending on which hw overlay it happened to use?
I'll need to investigate more on this.
>
>> - dispc_ovl_enable(priv->dispc, ovl_id, false);
>> + omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
>> + new_omap_state->overlay = NULL;
>> }
>> +#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
>> static int omap_plane_atomic_check(struct drm_plane *plane,
>> struct drm_atomic_state *state)
>> {
>> struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
>> plane);
>> + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state,
>> + plane);
>> + struct drm_crtc *crtc;
>> struct omap_drm_private *priv = plane->dev->dev_private;
>> + struct omap_plane_state *omap_state = to_omap_plane_state(new_plane_state);
>> + struct omap_global_state *omap_overlay_global_state;
>> + u32 crtc_mask;
>> + u32 fourcc;
>> + u32 caps = 0;
>> + bool new_hw_overlay = false;
>> + int min_scale, max_scale;
>> + int ret;
>> struct drm_crtc_state *crtc_state;
>> u16 width, height;
>> u32 width_fp, height_fp;
>> - if (!new_plane_state->fb)
>> - return 0;
>> + omap_overlay_global_state = omap_get_global_state(state);
>> + if (IS_ERR(omap_overlay_global_state))
>> + return PTR_ERR(omap_overlay_global_state);
>> + DBG("%s: omap_overlay_global_state: %p", plane->name,
>> + omap_overlay_global_state);
>> dispc_ovl_get_max_size(priv->dispc, &width, &height);
>> width_fp = width << 16;
>> height_fp = height << 16;
>> - /* crtc should only be NULL when disabling (i.e., !new_plane_state->fb) */
>> - if (WARN_ON(!new_plane_state->crtc))
>> + crtc = new_plane_state->crtc ? new_plane_state->crtc : plane->state->crtc;
>> + if (!crtc)
>> return 0;
>> - crtc_state = drm_atomic_get_existing_crtc_state(state,
>> - new_plane_state->crtc);
>> + crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
>> /* we should have a crtc state if the plane is attached to a crtc */
>> if (WARN_ON(!crtc_state))
>> return 0;
>> - if (!crtc_state->enable)
>> - return 0;
>> -
>> - if (new_plane_state->crtc_x < 0 || new_plane_state->crtc_y < 0)
>> - return -EINVAL;
>> -
>> - if (new_plane_state->crtc_x + new_plane_state->crtc_w > crtc_state->adjusted_mode.hdisplay)
>> - return -EINVAL;
>> -
>> - if (new_plane_state->crtc_y + new_plane_state->crtc_h > crtc_state->adjusted_mode.vdisplay)
>> - return -EINVAL;
>> -
>> /* Make sure dimensions are within bounds. */
>> if (new_plane_state->src_h > height_fp || new_plane_state->crtc_h > height)
>> return -EINVAL;
>> @@ -161,9 +190,81 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
>> if (new_plane_state->src_w > width_fp || new_plane_state->crtc_w > width)
>> return -EINVAL;
>> - if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
>> - !omap_framebuffer_supports_rotation(new_plane_state->fb))
>> - return -EINVAL;
>> +
>> + /*
>> + * Note: these are just sanity checks to filter out totally bad scaling
>> + * factors. The real limits must be calculated case by case, and
>> + * unfortunately we currently do those checks only at the commit
>> + * phase in dispc.
>> + */
>> + min_scale = FRAC_16_16(1, 8);
>> + max_scale = FRAC_16_16(8, 1);
>> +
>> + ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
>> + min_scale, max_scale,
>> + true, true);
>
> This piece here feels a bit out of context (wrt. to this patch). Why do we need it here, when adding support to hw overlays?
>
> And I think it's fine to use the above helper, but maybe it can be in a separate patch earlier?
I'll move it out of this patch.
>
>
>> + if (ret)
>> + return ret;
>> +
>> + DBG("%s: check (%d -> %d)", plane->name,
>> + old_plane_state->visible, new_plane_state->visible);
>
> Here's an example of the debug prints I mentioned earlier. I think this prints:
>
> "GFX: check (1 -> 0)"
>
> I'm fine with terse debug prints, but... maybe something like "visible 1 -> 0" would be much better? =)
Fixed
>
>> + if (new_plane_state->visible) {
>> + if (new_plane_state->rotation != DRM_MODE_ROTATE_0 &&
>> + !omap_framebuffer_supports_rotation(new_plane_state->fb))
>> + return -EINVAL;
>> +
>> + if ((new_plane_state->src_w >> 16) != new_plane_state->crtc_w ||
>> + (new_plane_state->src_h >> 16) != new_plane_state->crtc_h)
>> + caps |= OMAP_DSS_OVL_CAP_SCALE;
>> +
>> + fourcc = new_plane_state->fb->format->format;
>> + crtc_mask = drm_crtc_mask(new_plane_state->crtc);
>> +
>> + /*
>> + * (re)allocate hw overlay if we don't have one or
>> + * there is a caps mismatch
>> + */
>> + if (!omap_state->overlay ||
>> + (caps & ~omap_state->overlay->caps)) {
>> + new_hw_overlay = true;
>> + } else {
>> + /* check if allowed on crtc */
>> + if (!(omap_state->overlay->possible_crtcs & crtc_mask))
>> + new_hw_overlay = true;
>> +
>> + /* check supported format */
>> + if (!dispc_ovl_color_mode_supported(priv->dispc,
>> + omap_state->overlay->overlay_id,
>> + fourcc))
>> + new_hw_overlay = true;
>> + }
>> +
>> + if (new_hw_overlay) {
>> + struct omap_hw_overlay *old_ovl = omap_state->overlay;
>> + struct omap_hw_overlay *new_ovl = NULL;
>> +
>> + omap_overlay_release(state, plane, old_ovl);
>> +
>> + ret = omap_overlay_assign(state, plane, caps,
>> + fourcc, crtc_mask, &new_ovl);
>> + if (ret) {
>> + DBG("%s: failed to assign hw_overlay(s)!",
>> + plane->name);
>> + omap_state->overlay = NULL;
>> + return ret;
>> + }
>> +
>> + omap_state->overlay = new_ovl;
>> + }
>> + } else {
>> + omap_overlay_release(state, plane, omap_state->overlay);
>> + omap_state->overlay = NULL;
>> + }
>> +
>> + if (omap_state->overlay)
>> + DBG("plane: %s overlay_id: %d", plane->name,
>> + omap_state->overlay->overlay_id);
>> return 0;
>> }
>> @@ -230,7 +331,7 @@ static void omap_plane_reset(struct drm_plane *plane)
>> * plane.
>> */
>> plane->state->zpos = plane->type == DRM_PLANE_TYPE_PRIMARY
>> - ? 0 : omap_plane->overlay->overlay_id;
>> + ? 0 : omap_plane->id;
>
> Hmm... On plane reset we now set the zpos to plane->id, but on disable we reset zpos to overlay->id. And before this patch we set the vice versa. I don't follow.
I'll aswell need to investigate more on this.
>
> Tomi
Neil
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v5 7/8] drm/omap: add plane_atomic_print_state support
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
` (5 preceding siblings ...)
2021-09-23 7:06 ` [PATCH v5 6/8] drm/omap: dynamically assign hw overlays to planes Neil Armstrong
@ 2021-09-23 7:07 ` Neil Armstrong
2021-09-23 7:07 ` [PATCH v5 8/8] drm/omap: Add a 'right overlay' to plane state Neil Armstrong
` (2 subsequent siblings)
9 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-09-23 7:07 UTC (permalink / raw)
To: tomba
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot,
Neil Armstrong
From: Benoit Parrot <bparrot@ti.com>
Now that we added specific item to our subclassed drm_plane_state
we can add omap_plane_atomic_print_state() helper to dump out our own
driver specific plane state.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/omapdrm/omap_plane.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 4b400a8bfe9e..badbafeb3402 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -355,6 +355,23 @@ omap_plane_atomic_duplicate_state(struct drm_plane *plane)
return ©->base;
}
+static void omap_plane_atomic_print_state(struct drm_printer *p,
+ const struct drm_plane_state *state)
+{
+ struct omap_plane_state *omap_state = to_omap_plane_state(state);
+
+ drm_printf(p, "\toverlay=%s\n", omap_state->overlay ?
+ omap_state->overlay->name : "(null)");
+ if (omap_state->overlay) {
+ drm_printf(p, "\t\tidx=%d\n", omap_state->overlay->idx);
+ drm_printf(p, "\t\toverlay_id=%d\n",
+ omap_state->overlay->overlay_id);
+ drm_printf(p, "\t\tcaps=0x%x\n", omap_state->overlay->caps);
+ drm_printf(p, "\t\tpossible_crtcs=0x%x\n",
+ omap_state->overlay->possible_crtcs);
+ }
+}
+
static int omap_plane_atomic_set_property(struct drm_plane *plane,
struct drm_plane_state *state,
struct drm_property *property,
@@ -394,6 +411,7 @@ static const struct drm_plane_funcs omap_plane_funcs = {
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
.atomic_set_property = omap_plane_atomic_set_property,
.atomic_get_property = omap_plane_atomic_get_property,
+ .atomic_print_state = omap_plane_atomic_print_state,
};
static bool omap_plane_supports_yuv(struct drm_plane *plane)
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v5 8/8] drm/omap: Add a 'right overlay' to plane state
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
` (6 preceding siblings ...)
2021-09-23 7:07 ` [PATCH v5 7/8] drm/omap: add plane_atomic_print_state support Neil Armstrong
@ 2021-09-23 7:07 ` Neil Armstrong
2021-10-06 8:17 ` [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
2021-10-12 7:15 ` Tomi Valkeinen
9 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-09-23 7:07 UTC (permalink / raw)
To: tomba
Cc: linux-omap, dri-devel, linux-kernel, khilman, Benoit Parrot,
Neil Armstrong
From: Benoit Parrot <bparrot@ti.com>
If the drm_plane has a source width that's greater than the max width
supported by a single hw overlay, then we assign a 'r_overlay' to it in
omap_plane_atomic_check().
Both overlays should have the capabilities required to handle the source
framebuffer. The only parameters that vary between the left and right
hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop
the fb into left and right halves.
We also take care of not creating odd width size when dealing with YUV
formats.
Since both halves need to be 'appear' side by side the zpos is
recalculated when dealing with dual overlay cases so that the other
planes zpos is consistent.
Depending on user space usage it is possible that on occasion the number
of requested planes exceeds the numbers of overlays required to display
them. In that case a failure would be returned for the plane that cannot
be handled at that time. It is up to user space to make sure the H/W
resource are not over-subscribed.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/omapdrm/omap_drv.c | 91 +++++++++++++++++-
drivers/gpu/drm/omapdrm/omap_fb.c | 33 ++++++-
drivers/gpu/drm/omapdrm/omap_fb.h | 4 +-
drivers/gpu/drm/omapdrm/omap_overlay.c | 31 +++++-
drivers/gpu/drm/omapdrm/omap_overlay.h | 3 +-
drivers/gpu/drm/omapdrm/omap_plane.c | 127 +++++++++++++++++++++++--
drivers/gpu/drm/omapdrm/omap_plane.h | 1 +
7 files changed, 276 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index c7912374d393..f088b6313950 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -117,6 +117,95 @@ static void omap_atomic_commit_tail(struct drm_atomic_state *old_state)
dispc_runtime_put(priv->dispc);
}
+static int drm_atomic_state_normalized_zpos_cmp(const void *a, const void *b)
+{
+ const struct drm_plane_state *sa = *(struct drm_plane_state **)a;
+ const struct drm_plane_state *sb = *(struct drm_plane_state **)b;
+
+ if (sa->normalized_zpos != sb->normalized_zpos)
+ return sa->normalized_zpos - sb->normalized_zpos;
+ else
+ return sa->plane->base.id - sb->plane->base.id;
+}
+
+static int omap_atomic_update_normalize_zpos(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *old_state, *new_state;
+ struct drm_plane *plane;
+ int c, i, n, inc;
+ int total_planes = dev->mode_config.num_total_plane;
+ struct drm_plane_state **states;
+ int ret = 0;
+
+ states = kmalloc_array(total_planes, sizeof(*states), GFP_KERNEL);
+ if (!states)
+ return -ENOMEM;
+
+ for_each_oldnew_crtc_in_state(state, crtc, old_state, new_state, c) {
+ if (old_state->plane_mask == new_state->plane_mask &&
+ !new_state->zpos_changed)
+ continue;
+
+ /* Reset plane increment and index value for every crtc */
+ n = 0;
+
+ /*
+ * Normalization process might create new states for planes
+ * which normalized_zpos has to be recalculated.
+ */
+ drm_for_each_plane_mask(plane, dev, new_state->plane_mask) {
+ struct drm_plane_state *plane_state =
+ drm_atomic_get_plane_state(new_state->state,
+ plane);
+ if (IS_ERR(plane_state)) {
+ ret = PTR_ERR(plane_state);
+ goto done;
+ }
+ states[n++] = plane_state;
+ }
+
+ sort(states, n, sizeof(*states),
+ drm_atomic_state_normalized_zpos_cmp, NULL);
+
+ for (i = 0, inc = 0; i < n; i++) {
+ plane = states[i]->plane;
+
+ states[i]->normalized_zpos = i + inc;
+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] updated normalized zpos value %d\n",
+ plane->base.id, plane->name,
+ states[i]->normalized_zpos);
+
+ if (is_omap_plane_dual_overlay(states[i]))
+ inc++;
+ }
+ new_state->zpos_changed = true;
+ }
+
+done:
+ kfree(states);
+ return ret;
+}
+
+static int omap_atomic_check(struct drm_device *dev,
+ struct drm_atomic_state *state)
+{
+ int ret;
+
+ ret = drm_atomic_helper_check(dev, state);
+ if (ret)
+ return ret;
+
+ if (dev->mode_config.normalize_zpos) {
+ ret = omap_atomic_update_normalize_zpos(dev, state);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs = {
.atomic_commit_tail = omap_atomic_commit_tail,
};
@@ -124,7 +213,7 @@ static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs =
static const struct drm_mode_config_funcs omap_mode_config_funcs = {
.fb_create = omap_framebuffer_create,
.output_poll_changed = drm_fb_helper_output_poll_changed,
- .atomic_check = drm_atomic_helper_check,
+ .atomic_check = omap_atomic_check,
.atomic_commit = drm_atomic_helper_commit,
};
diff --git a/drivers/gpu/drm/omapdrm/omap_fb.c b/drivers/gpu/drm/omapdrm/omap_fb.c
index 190afc564914..895e66b08a81 100644
--- a/drivers/gpu/drm/omapdrm/omap_fb.c
+++ b/drivers/gpu/drm/omapdrm/omap_fb.c
@@ -131,7 +131,9 @@ static u32 drm_rotation_to_tiler(unsigned int drm_rot)
/* update ovl info for scanout, handles cases of multi-planar fb's, etc.
*/
void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
- struct drm_plane_state *state, struct omap_overlay_info *info)
+ struct drm_plane_state *state,
+ struct omap_overlay_info *info,
+ struct omap_overlay_info *r_info)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
const struct drm_format_info *format = omap_fb->format;
@@ -218,6 +220,35 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
} else {
info->p_uv_addr = 0;
}
+
+ if (r_info) {
+ info->width /= 2;
+ info->out_width /= 2;
+
+ *r_info = *info;
+
+ if (fb->format->is_yuv) {
+ if (info->width & 1) {
+ info->width++;
+ r_info->width--;
+ }
+
+ if (info->out_width & 1) {
+ info->out_width++;
+ r_info->out_width--;
+ }
+ }
+
+ r_info->pos_x = info->pos_x + info->out_width;
+
+ r_info->paddr = get_linear_addr(fb, format, 0,
+ x + info->width, y);
+ if (fb->format->format == DRM_FORMAT_NV12) {
+ r_info->p_uv_addr =
+ get_linear_addr(fb, format, 1,
+ x + info->width, y);
+ }
+ }
}
/* pin, prepare for scanout: */
diff --git a/drivers/gpu/drm/omapdrm/omap_fb.h b/drivers/gpu/drm/omapdrm/omap_fb.h
index c0e19aed8220..b75f0b5ef1d8 100644
--- a/drivers/gpu/drm/omapdrm/omap_fb.h
+++ b/drivers/gpu/drm/omapdrm/omap_fb.h
@@ -26,7 +26,9 @@ struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
int omap_framebuffer_pin(struct drm_framebuffer *fb);
void omap_framebuffer_unpin(struct drm_framebuffer *fb);
void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
- struct drm_plane_state *state, struct omap_overlay_info *info);
+ struct drm_plane_state *state,
+ struct omap_overlay_info *info,
+ struct omap_overlay_info *r_info);
bool omap_framebuffer_supports_rotation(struct drm_framebuffer *fb);
void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m);
diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.c b/drivers/gpu/drm/omapdrm/omap_overlay.c
index f1a23c2203aa..a4f4be008bd5 100644
--- a/drivers/gpu/drm/omapdrm/omap_overlay.c
+++ b/drivers/gpu/drm/omapdrm/omap_overlay.c
@@ -63,12 +63,14 @@ omap_plane_find_free_overlay(struct drm_device *dev,
int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
u32 caps, u32 fourcc, u32 crtc_mask,
- struct omap_hw_overlay **overlay)
+ struct omap_hw_overlay **overlay,
+ struct omap_hw_overlay **r_overlay)
{
struct omap_drm_private *priv = s->dev->dev_private;
struct omap_global_state *new_global_state, *old_global_state;
struct drm_plane **overlay_map;
- struct omap_hw_overlay *ovl;
+ struct omap_hw_overlay *ovl, *r_ovl;
+ u32 save_possible_crtcs;
new_global_state = omap_get_global_state(s);
if (IS_ERR(new_global_state))
@@ -90,12 +92,37 @@ int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
if (!ovl)
return -ENOMEM;
+ /* in case we need to backtrack */
+ save_possible_crtcs = ovl->possible_crtcs;
+
ovl->possible_crtcs = crtc_mask;
overlay_map[ovl->idx] = plane;
*overlay = ovl;
+ if (r_overlay) {
+ r_ovl = omap_plane_find_free_overlay(s->dev,
+ overlay_map,
+ caps, fourcc,
+ crtc_mask);
+ if (!r_ovl) {
+ ovl->possible_crtcs = save_possible_crtcs;
+ overlay_map[ovl->idx] = NULL;
+ *overlay = NULL;
+ return -ENOMEM;
+ }
+
+ r_ovl->possible_crtcs = crtc_mask;
+ overlay_map[r_ovl->idx] = plane;
+ *r_overlay = r_ovl;
+ }
+
DBG("%s: assign to plane %s caps %x on crtc %x",
(*overlay)->name, plane->name, caps, crtc_mask);
+
+ if (r_overlay) {
+ DBG("%s: assign to right of plane %s caps %x on crtc %x",
+ (*r_overlay)->name, plane->name, caps, crtc_mask);
+ }
}
return 0;
diff --git a/drivers/gpu/drm/omapdrm/omap_overlay.h b/drivers/gpu/drm/omapdrm/omap_overlay.h
index d5033ee481c2..a800468511f1 100644
--- a/drivers/gpu/drm/omapdrm/omap_overlay.h
+++ b/drivers/gpu/drm/omapdrm/omap_overlay.h
@@ -30,7 +30,8 @@ int omap_hwoverlays_init(struct omap_drm_private *priv);
void omap_hwoverlays_destroy(struct omap_drm_private *priv);
int omap_overlay_assign(struct drm_atomic_state *s, struct drm_plane *plane,
u32 caps, u32 fourcc, u32 crtc_mask,
- struct omap_hw_overlay **overlay);
+ struct omap_hw_overlay **overlay,
+ struct omap_hw_overlay **r_overlay);
void omap_overlay_release(struct drm_atomic_state *s,
struct drm_plane *plane,
struct omap_hw_overlay *overlay);
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index badbafeb3402..13bfda7305e9 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -24,6 +24,7 @@ struct omap_plane_state {
struct drm_plane_state base;
struct omap_hw_overlay *overlay;
+ struct omap_hw_overlay *r_overlay; /* right overlay */
};
#define to_omap_plane(x) container_of(x, struct omap_plane, base)
@@ -34,6 +35,13 @@ struct omap_plane {
const char *name;
};
+bool is_omap_plane_dual_overlay(struct drm_plane_state *state)
+{
+ struct omap_plane_state *omap_state = to_omap_plane_state(state);
+
+ return !!omap_state->r_overlay;
+}
+
static int omap_plane_prepare_fb(struct drm_plane *plane,
struct drm_plane_state *new_state)
{
@@ -63,15 +71,20 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
plane);
struct omap_plane_state *new_omap_state;
struct omap_plane_state *old_omap_state;
- struct omap_overlay_info info;
- enum omap_plane_id ovl_id;
+ struct omap_overlay_info info, r_info;
+ enum omap_plane_id ovl_id, r_ovl_id;
int ret;
+ bool dual_ovl;
new_omap_state = to_omap_plane_state(new_state);
old_omap_state = to_omap_plane_state(old_state);
+ dual_ovl = is_omap_plane_dual_overlay(new_state);
+
/* Cleanup previously held overlay if needed */
omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
+ omap_overlay_disable(old_state->state, plane,
+ old_omap_state->r_overlay);
if (!new_omap_state->overlay) {
DBG("[PLANE:%d:%s] overlay_id: ??? (%p)", plane->base.id, plane->name,
@@ -95,8 +108,11 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
info.color_encoding = new_state->color_encoding;
info.color_range = new_state->color_range;
+ r_info = info;
+
/* update scanout: */
- omap_framebuffer_update_scanout(new_state->fb, new_state, &info);
+ omap_framebuffer_update_scanout(new_state->fb, new_state, &info,
+ dual_ovl ? &r_info : NULL);
DBG("%s: %dx%d -> %dx%d (%d)",
new_omap_state->overlay->name, info.width, info.height,
@@ -104,18 +120,50 @@ static void omap_plane_atomic_update(struct drm_plane *plane,
DBG("%d,%d %pad %pad", info.pos_x, info.pos_y,
&info.paddr, &info.p_uv_addr);
+ if (dual_ovl) {
+ r_ovl_id = new_omap_state->r_overlay->overlay_id;
+ /*
+ * If the current plane uses 2 hw planes the very next
+ * zorder is used by the r_overlay so we just use the
+ * main overlay zorder + 1
+ */
+ r_info.zorder = info.zorder + 1;
+
+ DBG("%s: %dx%d -> %dx%d (%d)",
+ new_omap_state->r_overlay->name,
+ r_info.width, r_info.height,
+ r_info.out_width, r_info.out_height, r_info.screen_width);
+ DBG("%d,%d %pad %pad", r_info.pos_x, r_info.pos_y,
+ &r_info.paddr, &r_info.p_uv_addr);
+ }
+
/* and finally, update omapdss: */
ret = dispc_ovl_setup(priv->dispc, ovl_id, &info,
omap_crtc_timings(new_state->crtc), false,
omap_crtc_channel(new_state->crtc));
if (ret) {
- dev_err(plane->dev->dev, "Failed to setup plane %s\n",
+ dev_err(plane->dev->dev, "Failed to setup plane1 %s\n",
omap_plane->name);
dispc_ovl_enable(priv->dispc, ovl_id, false);
return;
}
dispc_ovl_enable(priv->dispc, ovl_id, true);
+
+ if (dual_ovl) {
+ ret = dispc_ovl_setup(priv->dispc, r_ovl_id, &r_info,
+ omap_crtc_timings(new_state->crtc), false,
+ omap_crtc_channel(new_state->crtc));
+ if (ret) {
+ dev_err(plane->dev->dev, "Failed to setup plane2 %s\n",
+ omap_plane->name);
+ dispc_ovl_enable(priv->dispc, r_ovl_id, false);
+ dispc_ovl_enable(priv->dispc, ovl_id, false);
+ return;
+ }
+
+ dispc_ovl_enable(priv->dispc, r_ovl_id, true);
+ }
}
static void omap_plane_atomic_disable(struct drm_plane *plane,
@@ -140,6 +188,11 @@ static void omap_plane_atomic_disable(struct drm_plane *plane,
omap_overlay_disable(old_state->state, plane, old_omap_state->overlay);
new_omap_state->overlay = NULL;
+ if (is_omap_plane_dual_overlay(old_state)) {
+ omap_overlay_disable(old_state->state, plane,
+ old_omap_state->r_overlay);
+ new_omap_state->r_overlay = NULL;
+ }
}
#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
@@ -158,6 +211,8 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
u32 fourcc;
u32 caps = 0;
bool new_hw_overlay = false;
+ bool new_r_hw_overlay = false;
+ bool is_fourcc_yuv = false;
int min_scale, max_scale;
int ret;
struct drm_crtc_state *crtc_state;
@@ -187,9 +242,31 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
if (new_plane_state->src_h > height_fp || new_plane_state->crtc_h > height)
return -EINVAL;
- if (new_plane_state->src_w > width_fp || new_plane_state->crtc_w > width)
- return -EINVAL;
-
+ if (new_plane_state->fb)
+ is_fourcc_yuv = new_plane_state->fb->format->is_yuv;
+
+ if (new_plane_state->src_w > width_fp || new_plane_state->crtc_w > width) {
+ if (is_fourcc_yuv &&
+ (((new_plane_state->src_w >> 16) / 2 & 1) ||
+ new_plane_state->crtc_w / 2 & 1)) {
+ /*
+ * When calculating the split overlay width
+ * and it yield an odd value we will need to adjust
+ * the indivual width +/- 1. So make sure it fits
+ */
+ if (new_plane_state->src_w <= ((2 * width - 1) << 16) &&
+ new_plane_state->crtc_w <= (2 * width - 1))
+ new_r_hw_overlay = true;
+ else
+ return -EINVAL;
+ } else {
+ if (new_plane_state->src_w <= (2 * width_fp) &&
+ new_plane_state->crtc_w <= (2 * width))
+ new_r_hw_overlay = true;
+ else
+ return -EINVAL;
+ }
+ }
/*
* Note: these are just sanity checks to filter out totally bad scaling
@@ -239,32 +316,55 @@ static int omap_plane_atomic_check(struct drm_plane *plane,
fourcc))
new_hw_overlay = true;
}
+ /*
+ * check if we need two overlays and only have 1 or
+ * if we had 2 overlays but will only need 1
+ */
+ if ((new_r_hw_overlay && !omap_state->r_overlay) ||
+ (!new_r_hw_overlay && omap_state->r_overlay))
+ new_hw_overlay = true;
if (new_hw_overlay) {
struct omap_hw_overlay *old_ovl = omap_state->overlay;
+ struct omap_hw_overlay *old_r_ovl =
+ omap_state->r_overlay;
struct omap_hw_overlay *new_ovl = NULL;
+ struct omap_hw_overlay *new_r_ovl = NULL;
omap_overlay_release(state, plane, old_ovl);
+ omap_overlay_release(state, plane, old_r_ovl);
ret = omap_overlay_assign(state, plane, caps,
- fourcc, crtc_mask, &new_ovl);
+ fourcc, crtc_mask, &new_ovl,
+ new_r_hw_overlay ?
+ &new_r_ovl : NULL);
if (ret) {
DBG("%s: failed to assign hw_overlay(s)!",
plane->name);
omap_state->overlay = NULL;
+ omap_state->r_overlay = NULL;
return ret;
}
omap_state->overlay = new_ovl;
+ if (new_r_hw_overlay)
+ omap_state->r_overlay = new_r_ovl;
+ else
+ omap_state->r_overlay = NULL;
}
} else {
omap_overlay_release(state, plane, omap_state->overlay);
+ omap_overlay_release(state, plane, omap_state->r_overlay);
omap_state->overlay = NULL;
+ omap_state->r_overlay = NULL;
}
if (omap_state->overlay)
DBG("plane: %s overlay_id: %d", plane->name,
omap_state->overlay->overlay_id);
+ if (omap_state->r_overlay)
+ DBG("plane: %s r_overlay_id: %d", plane->name,
+ omap_state->r_overlay->overlay_id);
return 0;
}
@@ -370,6 +470,17 @@ static void omap_plane_atomic_print_state(struct drm_printer *p,
drm_printf(p, "\t\tpossible_crtcs=0x%x\n",
omap_state->overlay->possible_crtcs);
}
+
+ drm_printf(p, "\tr_overlay=%s\n", omap_state->r_overlay ?
+ omap_state->r_overlay->name : "(null)");
+ if (omap_state->r_overlay) {
+ drm_printf(p, "\t\tidx=%d\n", omap_state->r_overlay->idx);
+ drm_printf(p, "\t\toverlay_id=%d\n",
+ omap_state->r_overlay->overlay_id);
+ drm_printf(p, "\t\tcaps=0x%x\n", omap_state->r_overlay->caps);
+ drm_printf(p, "\t\tpossible_crtcs=0x%x\n",
+ omap_state->r_overlay->possible_crtcs);
+ }
}
static int omap_plane_atomic_set_property(struct drm_plane *plane,
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.h b/drivers/gpu/drm/omapdrm/omap_plane.h
index 0c28fe8ffa20..a9a33e12722a 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.h
+++ b/drivers/gpu/drm/omapdrm/omap_plane.h
@@ -22,5 +22,6 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
u32 possible_crtcs);
void omap_plane_install_properties(struct drm_plane *plane,
struct drm_mode_object *obj);
+bool is_omap_plane_dual_overlay(struct drm_plane_state *state);
#endif /* __OMAPDRM_PLANE_H__ */
--
2.25.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* Re: [PATCH v5 0/8] drm/omap: Add virtual-planes support
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
` (7 preceding siblings ...)
2021-09-23 7:07 ` [PATCH v5 8/8] drm/omap: Add a 'right overlay' to plane state Neil Armstrong
@ 2021-10-06 8:17 ` Neil Armstrong
2021-10-06 12:48 ` Tomi Valkeinen
2021-10-12 7:15 ` Tomi Valkeinen
9 siblings, 1 reply; 27+ messages in thread
From: Neil Armstrong @ 2021-10-06 8:17 UTC (permalink / raw)
To: tomba; +Cc: linux-omap, dri-devel, linux-kernel, khilman
Hi,
On 23/09/2021 09:06, Neil Armstrong wrote:
> This patchset is the follow-up the v4 patchset from Benoit Parrot at [1].
>
> This patch series adds virtual-plane support to omapdrm driver to allow the use
> of display wider than 2048 pixels.
>
> In order to do so we introduce the concept of hw_overlay which can then be
> dynamically allocated to a plane. When the requested output width exceed what
> be supported by one overlay a second is then allocated if possible to handle
> display wider then 2048.
>
> This series replaces an earlier series which was DT based and using statically
> allocated resources.
>
> This implementation is inspired from the work done in msm/disp/mdp5
> driver.
Gentle ping, who is supposed reviewing those patches ?
Thanks,
Neil
>
> Changes since v4 at [1]:
> - rebased on v5.15-rc2
> - adapted to drm_atomic_get_new/old_plane_state()
> - tested on Beagle-x15
> - checked for non-regression on Beagle-x15
> - removed unused "state" variable in omap_global_state
>
> [1] https://lore.kernel.org/all/20181012201703.29065-1-bparrot@ti.com/
>
> Benoit Parrot (8):
> drm/omap: Add ability to check if requested plane modes can be
> supported
> drm/omap: Add ovl checking funcs to dispc_ops
> drm/omap: introduce omap_hw_overlay
> drm/omap: omap_plane: subclass drm_plane_state
> drm/omap: Add global state as a private atomic object
> drm/omap: dynamically assign hw overlays to planes
> drm/omap: add plane_atomic_print_state support
> drm/omap: Add a 'right overlay' to plane state
>
> drivers/gpu/drm/omapdrm/Makefile | 1 +
> drivers/gpu/drm/omapdrm/dss/dispc.c | 31 +-
> drivers/gpu/drm/omapdrm/dss/dss.h | 5 +
> drivers/gpu/drm/omapdrm/omap_drv.c | 189 ++++++++++++-
> drivers/gpu/drm/omapdrm/omap_drv.h | 28 ++
> drivers/gpu/drm/omapdrm/omap_fb.c | 33 ++-
> drivers/gpu/drm/omapdrm/omap_fb.h | 4 +-
> drivers/gpu/drm/omapdrm/omap_overlay.c | 254 +++++++++++++++++
> drivers/gpu/drm/omapdrm/omap_overlay.h | 41 +++
> drivers/gpu/drm/omapdrm/omap_plane.c | 375 +++++++++++++++++++++----
> drivers/gpu/drm/omapdrm/omap_plane.h | 1 +
> 11 files changed, 903 insertions(+), 59 deletions(-)
> create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.c
> create mode 100644 drivers/gpu/drm/omapdrm/omap_overlay.h
>
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 0/8] drm/omap: Add virtual-planes support
2021-10-06 8:17 ` [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
@ 2021-10-06 12:48 ` Tomi Valkeinen
0 siblings, 0 replies; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-06 12:48 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-omap, dri-devel, linux-kernel, khilman
Hi Neil,
On 06/10/2021 11:17, Neil Armstrong wrote:
> Hi,
>
> On 23/09/2021 09:06, Neil Armstrong wrote:
>> This patchset is the follow-up the v4 patchset from Benoit Parrot at [1].
>>
>> This patch series adds virtual-plane support to omapdrm driver to allow the use
>> of display wider than 2048 pixels.
>>
>> In order to do so we introduce the concept of hw_overlay which can then be
>> dynamically allocated to a plane. When the requested output width exceed what
>> be supported by one overlay a second is then allocated if possible to handle
>> display wider then 2048.
>>
>> This series replaces an earlier series which was DT based and using statically
>> allocated resources.
>>
>> This implementation is inspired from the work done in msm/disp/mdp5
>> driver.
>
> Gentle ping, who is supposed reviewing those patches ?
I think that would be me. I'll try to find time in the nearby future to
do the review.
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v5 0/8] drm/omap: Add virtual-planes support
2021-09-23 7:06 [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
` (8 preceding siblings ...)
2021-10-06 8:17 ` [PATCH v5 0/8] drm/omap: Add virtual-planes support Neil Armstrong
@ 2021-10-12 7:15 ` Tomi Valkeinen
2021-10-12 8:30 ` Neil Armstrong
9 siblings, 1 reply; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-12 7:15 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-omap, dri-devel, linux-kernel, khilman
On 23/09/2021 10:06, Neil Armstrong wrote:
> This patchset is the follow-up the v4 patchset from Benoit Parrot at [1].
>
> This patch series adds virtual-plane support to omapdrm driver to allow the use
> of display wider than 2048 pixels.
>
> In order to do so we introduce the concept of hw_overlay which can then be
> dynamically allocated to a plane. When the requested output width exceed what
> be supported by one overlay a second is then allocated if possible to handle
> display wider then 2048.
>
> This series replaces an earlier series which was DT based and using statically
> allocated resources.
>
> This implementation is inspired from the work done in msm/disp/mdp5
> driver.
>
> Changes since v4 at [1]:
> - rebased on v5.15-rc2
What is this based on? Doesn't apply to v5.15-rc2, and "error: sha1
information is lacking or useless".
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread* Re: [PATCH v5 0/8] drm/omap: Add virtual-planes support
2021-10-12 7:15 ` Tomi Valkeinen
@ 2021-10-12 8:30 ` Neil Armstrong
2021-10-12 10:36 ` Tomi Valkeinen
0 siblings, 1 reply; 27+ messages in thread
From: Neil Armstrong @ 2021-10-12 8:30 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, dri-devel, linux-kernel, khilman
On 12/10/2021 09:15, Tomi Valkeinen wrote:
> On 23/09/2021 10:06, Neil Armstrong wrote:
>> This patchset is the follow-up the v4 patchset from Benoit Parrot at [1].
>>
>> This patch series adds virtual-plane support to omapdrm driver to allow the use
>> of display wider than 2048 pixels.
>>
>> In order to do so we introduce the concept of hw_overlay which can then be
>> dynamically allocated to a plane. When the requested output width exceed what
>> be supported by one overlay a second is then allocated if possible to handle
>> display wider then 2048.
>>
>> This series replaces an earlier series which was DT based and using statically
>> allocated resources.
>>
>> This implementation is inspired from the work done in msm/disp/mdp5
>> driver.
>>
>> Changes since v4 at [1]:
>> - rebased on v5.15-rc2
>
> What is this based on? Doesn't apply to v5.15-rc2, and "error: sha1 information is lacking or useless".
Indeed the sha1 info is useless, it's based on v5.15-rc2 on top of "HACK: drm/omap: increase DSS5 max tv pclk to 192MHz"
in order to validate on 2k monitors.
My bad, I thought it would apply based on this patch, I'll rebase on v5.15-rc2 for v6.
Thanks for the review,
Neil
>
> Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v5 0/8] drm/omap: Add virtual-planes support
2021-10-12 8:30 ` Neil Armstrong
@ 2021-10-12 10:36 ` Tomi Valkeinen
2021-10-12 13:27 ` Neil Armstrong
0 siblings, 1 reply; 27+ messages in thread
From: Tomi Valkeinen @ 2021-10-12 10:36 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-omap, dri-devel, linux-kernel, khilman
On 12/10/2021 11:30, Neil Armstrong wrote:
> On 12/10/2021 09:15, Tomi Valkeinen wrote:
>> On 23/09/2021 10:06, Neil Armstrong wrote:
>>> This patchset is the follow-up the v4 patchset from Benoit Parrot at [1].
>>>
>>> This patch series adds virtual-plane support to omapdrm driver to allow the use
>>> of display wider than 2048 pixels.
>>>
>>> In order to do so we introduce the concept of hw_overlay which can then be
>>> dynamically allocated to a plane. When the requested output width exceed what
>>> be supported by one overlay a second is then allocated if possible to handle
>>> display wider then 2048.
>>>
>>> This series replaces an earlier series which was DT based and using statically
>>> allocated resources.
>>>
>>> This implementation is inspired from the work done in msm/disp/mdp5
>>> driver.
>>>
>>> Changes since v4 at [1]:
>>> - rebased on v5.15-rc2
>>
>> What is this based on? Doesn't apply to v5.15-rc2, and "error: sha1 information is lacking or useless".
>
> Indeed the sha1 info is useless, it's based on v5.15-rc2 on top of "HACK: drm/omap: increase DSS5 max tv pclk to 192MHz"
> in order to validate on 2k monitors.
I'm personally fine with removing the HACK from that, and applying it
too. I used the patch for a long time without any issues. However, I
never found anyone to confirm that 192MHz is fine (or that it's not
fine). Too old HW for finding HW engineers to look at it =).
Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v5 0/8] drm/omap: Add virtual-planes support
2021-10-12 10:36 ` Tomi Valkeinen
@ 2021-10-12 13:27 ` Neil Armstrong
0 siblings, 0 replies; 27+ messages in thread
From: Neil Armstrong @ 2021-10-12 13:27 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, dri-devel, linux-kernel, khilman
Hi,
On 12/10/2021 12:36, Tomi Valkeinen wrote:
> On 12/10/2021 11:30, Neil Armstrong wrote:
>> On 12/10/2021 09:15, Tomi Valkeinen wrote:
>>> On 23/09/2021 10:06, Neil Armstrong wrote:
>>>> This patchset is the follow-up the v4 patchset from Benoit Parrot at [1].
>>>>
>>>> This patch series adds virtual-plane support to omapdrm driver to allow the use
>>>> of display wider than 2048 pixels.
>>>>
>>>> In order to do so we introduce the concept of hw_overlay which can then be
>>>> dynamically allocated to a plane. When the requested output width exceed what
>>>> be supported by one overlay a second is then allocated if possible to handle
>>>> display wider then 2048.
>>>>
>>>> This series replaces an earlier series which was DT based and using statically
>>>> allocated resources.
>>>>
>>>> This implementation is inspired from the work done in msm/disp/mdp5
>>>> driver.
>>>>
>>>> Changes since v4 at [1]:
>>>> - rebased on v5.15-rc2
>>>
>>> What is this based on? Doesn't apply to v5.15-rc2, and "error: sha1 information is lacking or useless".
>>
>> Indeed the sha1 info is useless, it's based on v5.15-rc2 on top of "HACK: drm/omap: increase DSS5 max tv pclk to 192MHz"
>> in order to validate on 2k monitors.
>
> I'm personally fine with removing the HACK from that, and applying it too. I used the patch for a long time without any issues. However, I never found anyone to confirm that 192MHz is fine (or that it's not fine). Too old HW for finding HW engineers to look at it =).
Indeed it seems to be applied the TI trees for a long time now, will post it.
Thanks,
Neil
>
> Tomi
^ permalink raw reply [flat|nested] 27+ messages in thread