[PATCH 0/3] ARM64: meson-gxbb: Add WeTek Boards

[PATCH 0/3] ARM64: meson-gxbb: Add WeTek Boards

[Neil Armstrong]

This serie adds support for the WeTek Hub and Play2 boards.
The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.

Both are based on the p200 Reference Design and out-of-tree support is
based on OpenELEC kernel at [1].

[1] https://github.com/wetek-enigma/linux-amlogic

Neil Armstrong (3):
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: amlogic: Add WeTek boards

 Documentation/devicetree/bindings/arm/amlogic.txt  |  2 +
 .../devicetree/bindings/vendor-prefixes.txt        |  1 +
 arch/arm64/boot/dts/amlogic/Makefile               |  2 +
 .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts      | 66 +++++++++++++++
 .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts    | 94 ++++++++++++++++++++++
 5 files changed, 165 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

-- 
1.9.1

[PATCH 1/3] dt-bindings: vendor-prefix: Add wetek vendor prefix

[Neil Armstrong]

Add prefix for WeTek Electronics, limited, a company producing multimedia
Set-Top-Boxes and supporting KODI and OpenELEC distributions.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 16d3b5e..0c16d85 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -320,6 +320,7 @@ virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 vivante	Vivante Corporation
 voipac	Voipac Technologies s.r.o.
 wd	Western Digital Corp.
+wetek	WeTek Electronics, limited.
 wexler	Wexler
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics
-- 
1.9.1

[PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play

[Neil Armstrong]

Adds support for the WeTek Hub and Play2 boards.
The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.

Both are based on the p200 Reference Design and out-of-tree support is
based on OpenELEC kernel at [1].

[1] https://github.com/wetek-enigma/linux-amlogic

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/Makefile               |  2 +
 .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts      | 66 +++++++++++++++
 .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts    | 94 ++++++++++++++++++++++
 3 files changed, 162 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0d7bfbf..cc2e2dd 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
new file mode 100644
index 0000000..56f8559
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "wetek,hub", "amlogic,meson-gxbb";
+	model = "WeTek Hub";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	cvbs-connector {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
new file mode 100644
index 0000000..ea79fdd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "wetek,play2", "amlogic,meson-gxbb";
+	model = "WeTek Play 2";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		wifi {
+			label = "wetek-play:wifi-status";
+			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		ethernet {
+			label = "wetek-play:ethernet-status";
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
-- 
1.9.1

[PATCH 3/3] dt-bindings: amlogic: Add WeTek boards

[Neil Armstrong]

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/arm/amlogic.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 9b2b41a..c246cd2 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -40,6 +40,8 @@ Board compatible values:
   - "hardkernel,odroid-c2" (Meson gxbb)
   - "amlogic,p200" (Meson gxbb)
   - "amlogic,p201" (Meson gxbb)
+  - "wetek,hub" (Meson gxbb)
+  - "wetek,play2" (Meson gxbb)
   - "amlogic,p212" (Meson gxl s905x)
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
-- 
1.9.1

Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> Adds support for the WeTek Hub and Play2 boards.
> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>
> Both are based on the p200 Reference Design and out-of-tree support is
> based on OpenELEC kernel at [1].
>
> [1] https://github.com/wetek-enigma/linux-amlogic
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Did you get the GPIO/button info from the LibreELEC tree or did you find
some schematics someplace?  If you found any schematics, it would be
nice to have links in the DTS files.

Kevin

Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play

[Neil Armstrong]

On 01/18/2017 11:53 PM, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
> 
>> Adds support for the WeTek Hub and Play2 boards.
>> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
>> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>>
>> Both are based on the p200 Reference Design and out-of-tree support is
>> based on OpenELEC kernel at [1].
>>
>> [1] https://github.com/wetek-enigma/linux-amlogic
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> Did you get the GPIO/button info from the LibreELEC tree or did you find
> some schematics someplace?  If you found any schematics, it would be
> nice to have links in the DTS files.
> 
> Kevin
> 

It was in the dts of the LibreELEC tree, I found no schematics so far.
I can respin a v2 with a link to the LibreELEC dts files.

Neil

Re: [PATCH 2/3] ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 01/18/2017 11:53 PM, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>> 
>>> Adds support for the WeTek Hub and Play2 boards.
>>> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
>>> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>>>
>>> Both are based on the p200 Reference Design and out-of-tree support is
>>> based on OpenELEC kernel at [1].
>>>
>>> [1] https://github.com/wetek-enigma/linux-amlogic
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> 
>> Did you get the GPIO/button info from the LibreELEC tree or did you find
>> some schematics someplace?  If you found any schematics, it would be
>> nice to have links in the DTS files.
>> 
>> Kevin
>> 
>
> It was in the dts of the LibreELEC tree, I found no schematics so far.
> I can respin a v2 with a link to the LibreELEC dts files.

No need for a respin.  But I'll s/OpenELEC/LibreELEC/ in the commit
message when applying.

Kevin

Re: [PATCH 0/3] ARM64: meson-gxbb: Add WeTek Boards

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> This serie adds support for the WeTek Hub and Play2 boards.
> The Hub is an extremely small IPTv Set-Top-Box and the Play2 is a more
> traditionnal Satellite or Terrestrial and IPTv Set-Top-Box.
>
> Both are based on the p200 Reference Design and out-of-tree support is
> based on OpenELEC kernel at [1].

Applied to v4.11/dt64 after s/OpenELEC/LibreELEC/

Kevin

> [1] https://github.com/wetek-enigma/linux-amlogic
>
> Neil Armstrong (3):
>   dt-bindings: vendor-prefix: Add wetek vendor prefix
>   ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
>   dt-bindings: amlogic: Add WeTek boards
>
>  Documentation/devicetree/bindings/arm/amlogic.txt  |  2 +
>  .../devicetree/bindings/vendor-prefixes.txt        |  1 +
>  arch/arm64/boot/dts/amlogic/Makefile               |  2 +
>  .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts      | 66 +++++++++++++++
>  .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts    | 94 ++++++++++++++++++++++
>  5 files changed, 165 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

Re: [PATCH 1/3] dt-bindings: vendor-prefix: Add wetek vendor prefix

[Rob Herring]

On Wed, Jan 18, 2017 at 11:50:40AM +0100, Neil Armstrong wrote:
> Add prefix for WeTek Electronics, limited, a company producing multimedia
> Set-Top-Boxes and supporting KODI and OpenELEC distributions.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 3/3] dt-bindings: amlogic: Add WeTek boards

[Rob Herring]

On Wed, Jan 18, 2017 at 11:50:42AM +0100, Neil Armstrong wrote:
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/arm/amlogic.txt | 2 ++
>  1 file changed, 2 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>