* [PATCH 00/14] ARM: dts: realtek: Introduce syscon
@ 2019-12-02 18:21 Andreas Färber
2019-12-02 18:21 ` [PATCH 01/14] ARM: dts: rtd1195: Introduce iso and misc syscon Andreas Färber
` (14 more replies)
0 siblings, 15 replies; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, devicetree,
Rob Herring, James Tai
Hello,
This patch series factors out system controller multi-function device nodes
for CRT, Iso, Misc, SB2 and SCPU Wrapper IP blocks.
It was inspired by my SoC info RFC, as discussed in its cover letter [1].
Goal of DT is to describe the hardware, and in previous patches we've already
introduced Realtek's r-bus as node layer. The next step here is to model
multi-function blocks as nodes. In order to cope with 80-character line limit,
child nodes are added via reference rather than in-place.
Also included is a patch adding a reset constant for the SB2 block added.
We may need to follow up with bindings adding compatibles, clocks and resets.
This series is based on my RTD1195 v4 [2] (except for reset, rebased here),
my RTD1395 v2 [3] and James' modified RTD1619 v3 [4].
The irq mux series v5 [5] has been rebased onto this series, v6 to be sent.
The SoC info RFC series [1] is still being updated, v2 to be posted later.
Latest experimental patches at:
https://github.com/afaerber/linux/commits/rtd1295-next
Have a lot of fun!
Cheers,
Andreas
[1] https://patchwork.kernel.org/cover/11224261/
[2] https://patchwork.kernel.org/cover/11258949/
[3] https://patchwork.kernel.org/cover/11268955/
[4] https://patchwork.kernel.org/patch/11239697/
[5] https://patchwork.kernel.org/cover/11255291/
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: James Tai <james.tai@realtek.com>
Andreas Färber (14):
ARM: dts: rtd1195: Introduce iso and misc syscon
arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon
arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon
arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon
ARM: dts: rtd1195: Add CRT syscon node
dt-bindings: reset: Add Realtek RTD1195
ARM: dts: rtd1195: Add reset nodes
ARM: dts: rtd1195: Add UART resets
arm64: dts: realtek: rtd16xx: Add CRT syscon node
ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes
arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes
arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes
arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes
dt-bindings: reset: rtd1295: Add SB2 reset
arch/arm/boot/dts/rtd1195.dtsi | 110 ++++++++++++++++---
arch/arm64/boot/dts/realtek/rtd129x.dtsi | 157 ++++++++++++++++++----------
arch/arm64/boot/dts/realtek/rtd139x.dtsi | 157 ++++++++++++++++++----------
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 91 ++++++++++++----
include/dt-bindings/reset/realtek,rtd1195.h | 74 +++++++++++++
include/dt-bindings/reset/realtek,rtd1295.h | 3 +
6 files changed, 449 insertions(+), 143 deletions(-)
create mode 100644 include/dt-bindings/reset/realtek,rtd1195.h
--
2.16.4
^ permalink raw reply [flat|nested] 33+ messages in thread
* [PATCH 01/14] ARM: dts: rtd1195: Introduce iso and misc syscon
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-02 18:21 ` [PATCH 02/14] arm64: dts: realtek: rtd129x: Introduce CRT, " Andreas Färber
` (13 subsequent siblings)
14 siblings, 0 replies; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Group watchdog and UART0 into an Isolation syscon mfd node.
Group UART1 into a Miscellaneous syscon mfd node.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm/boot/dts/rtd1195.dtsi | 58 +++++++++++++++++++++++++++++-------------
1 file changed, 40 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
index a8f7b9caacba..a74f530dc439 100644
--- a/arch/arm/boot/dts/rtd1195.dtsi
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -100,28 +100,22 @@
#size-cells = <1>;
ranges = <0x0 0x18000000 0x70000>;
- wdt: watchdog@7680 {
- compatible = "realtek,rtd1295-watchdog";
- reg = <0x7680 0x100>;
- clocks = <&osc27M>;
- };
-
- uart0: serial@7800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x7800 0x400>;
- reg-shift = <2>;
+ iso: syscon@7000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x7000 0x1000>;
reg-io-width = <4>;
- clock-frequency = <27000000>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
};
- uart1: serial@1b200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x1b200 0x100>;
- reg-shift = <2>;
+ misc: syscon@1b000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1b000 0x1000>;
reg-io-width = <4>;
- clock-frequency = <27000000>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1b000 0x1000>;
};
};
@@ -137,3 +131,31 @@
};
};
};
+
+&iso {
+ wdt: watchdog@680 {
+ compatible = "realtek,rtd1295-watchdog";
+ reg = <0x680 0x100>;
+ clocks = <&osc27M>;
+ };
+
+ uart0: serial@800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+};
+
+&misc {
+ uart1: serial@200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x200 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+};
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 02/14] arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
2019-12-02 18:21 ` [PATCH 01/14] ARM: dts: rtd1195: Introduce iso and misc syscon Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-30 14:40 ` James Tai
2019-12-02 18:21 ` [PATCH 03/14] arm64: dts: realtek: rtd139x: " Andreas Färber
` (12 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Group the non-iso reset controller nodes in a CRT syscon mfd node.
Group reset controller, watchdog and UART0 in an Isolation syscon mfd node.
Group UART1 and UART2 into a Miscellaneous syscon mfd node.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm64/boot/dts/realtek/rtd129x.dtsi | 147 +++++++++++++++++++------------
1 file changed, 90 insertions(+), 57 deletions(-)
diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
index 0de9e675be16..34dc09790d0b 100644
--- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
@@ -63,70 +63,31 @@
#size-cells = <1>;
ranges = <0x0 0x98000000 0x200000>;
- reset1: reset-controller@0 {
- compatible = "snps,dw-low-reset";
- reg = <0x0 0x4>;
- #reset-cells = <1>;
- };
-
- reset2: reset-controller@4 {
- compatible = "snps,dw-low-reset";
- reg = <0x4 0x4>;
- #reset-cells = <1>;
- };
-
- reset3: reset-controller@8 {
- compatible = "snps,dw-low-reset";
- reg = <0x8 0x4>;
- #reset-cells = <1>;
- };
-
- reset4: reset-controller@50 {
- compatible = "snps,dw-low-reset";
- reg = <0x50 0x4>;
- #reset-cells = <1>;
- };
-
- iso_reset: reset-controller@7088 {
- compatible = "snps,dw-low-reset";
- reg = <0x7088 0x4>;
- #reset-cells = <1>;
- };
-
- wdt: watchdog@7680 {
- compatible = "realtek,rtd1295-watchdog";
- reg = <0x7680 0x100>;
- clocks = <&osc27M>;
- };
-
- uart0: serial@7800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x7800 0x400>;
- reg-shift = <2>;
+ crt: syscon@0 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x1800>;
reg-io-width = <4>;
- clock-frequency = <27000000>;
- resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1800>;
};
- uart1: serial@1b200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x1b200 0x100>;
- reg-shift = <2>;
+ iso: syscon@7000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x7000 0x1000>;
reg-io-width = <4>;
- clock-frequency = <432000000>;
- resets = <&reset2 RTD1295_RSTN_UR1>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
};
- uart2: serial@1b400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x1b400 0x100>;
- reg-shift = <2>;
+ misc: syscon@1b000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1b000 0x1000>;
reg-io-width = <4>;
- clock-frequency = <432000000>;
- resets = <&reset2 RTD1295_RSTN_UR2>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1b000 0x1000>;
};
};
@@ -142,3 +103,75 @@
};
};
};
+
+&crt {
+ reset1: reset-controller@0 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset2: reset-controller@4 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x4 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset3: reset-controller@8 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x8 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset4: reset-controller@50 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x50 0x4>;
+ #reset-cells = <1>;
+ };
+};
+
+&iso {
+ iso_reset: reset-controller@88 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x88 0x4>;
+ #reset-cells = <1>;
+ };
+
+ wdt: watchdog@680 {
+ compatible = "realtek,rtd1295-watchdog";
+ reg = <0x680 0x100>;
+ clocks = <&osc27M>;
+ };
+
+ uart0: serial@800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+ status = "disabled";
+ };
+};
+
+&misc {
+ uart1: serial@200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x200 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ resets = <&reset2 RTD1295_RSTN_UR1>;
+ status = "disabled";
+ };
+
+ uart2: serial@400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x400 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ resets = <&reset2 RTD1295_RSTN_UR2>;
+ status = "disabled";
+ };
+};
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 03/14] arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
2019-12-02 18:21 ` [PATCH 01/14] ARM: dts: rtd1195: Introduce iso and misc syscon Andreas Färber
2019-12-02 18:21 ` [PATCH 02/14] arm64: dts: realtek: rtd129x: Introduce CRT, " Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-30 14:39 ` James Tai
2019-12-02 18:21 ` [PATCH 04/14] arm64: dts: realtek: rtd16xx: Introduce " Andreas Färber
` (11 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Group the non-iso reset controller nodes into a CRT syscon mfd node.
Group reset controller, watchdog and UART0 into an Isolation mfd node.
Group UART1 and UART2 into a Miscellaneous syscon mfd node.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm64/boot/dts/realtek/rtd139x.dtsi | 147 +++++++++++++++++++------------
1 file changed, 90 insertions(+), 57 deletions(-)
diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
index c11a505e43e2..3a571f3b7e38 100644
--- a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
@@ -61,70 +61,31 @@
#size-cells = <1>;
ranges = <0x0 0x98000000 0x200000>;
- reset1: reset-controller@0 {
- compatible = "snps,dw-low-reset";
- reg = <0x0 0x4>;
- #reset-cells = <1>;
- };
-
- reset2: reset-controller@4 {
- compatible = "snps,dw-low-reset";
- reg = <0x4 0x4>;
- #reset-cells = <1>;
- };
-
- reset3: reset-controller@8 {
- compatible = "snps,dw-low-reset";
- reg = <0x8 0x4>;
- #reset-cells = <1>;
- };
-
- reset4: reset-controller@50 {
- compatible = "snps,dw-low-reset";
- reg = <0x50 0x4>;
- #reset-cells = <1>;
- };
-
- iso_reset: reset-controller@7088 {
- compatible = "snps,dw-low-reset";
- reg = <0x7088 0x4>;
- #reset-cells = <1>;
- };
-
- wdt: watchdog@7680 {
- compatible = "realtek,rtd1295-watchdog";
- reg = <0x7680 0x100>;
- clocks = <&osc27M>;
- };
-
- uart0: serial@7800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x7800 0x400>;
- reg-shift = <2>;
+ crt: syscon@0 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x1000>;
reg-io-width = <4>;
- clock-frequency = <27000000>;
- resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
};
- uart1: serial@1b200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x1b200 0x100>;
- reg-shift = <2>;
+ iso: syscon@7000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x7000 0x1000>;
reg-io-width = <4>;
- clock-frequency = <432000000>;
- resets = <&reset2 RTD1295_RSTN_UR1>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
};
- uart2: serial@1b400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x1b400 0x100>;
- reg-shift = <2>;
+ misc: syscon@1b000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1b000 0x1000>;
reg-io-width = <4>;
- clock-frequency = <432000000>;
- resets = <&reset2 RTD1295_RSTN_UR2>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1b000 0x1000>;
};
};
@@ -140,3 +101,75 @@
};
};
};
+
+&crt {
+ reset1: reset-controller@0 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset2: reset-controller@4 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x4 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset3: reset-controller@8 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x8 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset4: reset-controller@50 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x50 0x4>;
+ #reset-cells = <1>;
+ };
+};
+
+&iso {
+ iso_reset: reset-controller@88 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x88 0x4>;
+ #reset-cells = <1>;
+ };
+
+ wdt: watchdog@680 {
+ compatible = "realtek,rtd1295-watchdog";
+ reg = <0x680 0x100>;
+ clocks = <&osc27M>;
+ };
+
+ uart0: serial@800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <27000000>;
+ resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+ status = "disabled";
+ };
+};
+
+&misc {
+ uart1: serial@200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x200 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ resets = <&reset2 RTD1295_RSTN_UR1>;
+ status = "disabled";
+ };
+
+ uart2: serial@400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x400 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <432000000>;
+ resets = <&reset2 RTD1295_RSTN_UR2>;
+ status = "disabled";
+ };
+};
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 04/14] arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (2 preceding siblings ...)
2019-12-02 18:21 ` [PATCH 03/14] arm64: dts: realtek: rtd139x: " Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-30 5:53 ` James Tai
2019-12-02 18:21 ` [PATCH 05/14] ARM: dts: rtd1195: Add CRT syscon node Andreas Färber
` (10 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Group UART0 into an Isolation syscon mfd node.
Group UART1 and UART2 into a Miscellaneous syscon mfd node.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 70 +++++++++++++++++++++-----------
1 file changed, 46 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
index 69cc0d941c8d..8f8f2b328cd1 100644
--- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -118,34 +118,22 @@
#size-cells = <1>;
ranges = <0x0 0x98000000 0x200000>;
- uart0: serial0@7800 {
- compatible = "snps,dw-apb-uart";
- reg = <0x7800 0x400>;
- reg-shift = <2>;
+ iso: syscon@7000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x7000 0x1000>;
reg-io-width = <4>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <27000000>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x7000 0x1000>;
};
- uart1: serial1@1b200 {
- compatible = "snps,dw-apb-uart";
- reg = <0x1b200 0x400>;
- reg-shift = <2>;
+ misc: syscon@1b000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1b000 0x1000>;
reg-io-width = <4>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <432000000>;
- status = "disabled";
- };
-
- uart2: serial2@1b400 {
- compatible = "snps,dw-apb-uart";
- reg = <0x1b400 0x400>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <432000000>;
- status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1b000 0x1000>;
};
};
@@ -159,3 +147,37 @@
};
};
};
+
+&iso {
+ uart0: serial0@800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x800 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <27000000>;
+ status = "disabled";
+ };
+};
+
+&misc {
+ uart1: serial1@200 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x200 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+
+ uart2: serial2@400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x400 0x400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <432000000>;
+ status = "disabled";
+ };
+};
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 05/14] ARM: dts: rtd1195: Add CRT syscon node
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (3 preceding siblings ...)
2019-12-02 18:21 ` [PATCH 04/14] arm64: dts: realtek: rtd16xx: Introduce " Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-31 9:16 ` James Tai
2019-12-02 18:21 ` [PATCH 06/14] dt-bindings: reset: Add Realtek RTD1195 Andreas Färber
` (9 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Prepare a CRT syscon mfd node.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm/boot/dts/rtd1195.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
index a74f530dc439..ac37366ff7c4 100644
--- a/arch/arm/boot/dts/rtd1195.dtsi
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -100,6 +100,15 @@
#size-cells = <1>;
ranges = <0x0 0x18000000 0x70000>;
+ crt: syscon@0 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
iso: syscon@7000 {
compatible = "syscon", "simple-mfd";
reg = <0x7000 0x1000>;
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 06/14] dt-bindings: reset: Add Realtek RTD1195
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (4 preceding siblings ...)
2019-12-02 18:21 ` [PATCH 05/14] ARM: dts: rtd1195: Add CRT syscon node Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-31 9:25 ` James Tai
2019-12-02 18:21 ` [PATCH 07/14] ARM: dts: rtd1195: Add reset nodes Andreas Färber
` (8 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber,
Philipp Zabel, Rob Herring, Mark Rutland, devicetree
Add a header with symbolic reset indices for Realtek RTD1195 SoC.
Naming was derived from BSP register description headers.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1: From RTD1195 v4 series
include/dt-bindings/reset/realtek,rtd1195.h | 74 +++++++++++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 include/dt-bindings/reset/realtek,rtd1195.h
diff --git a/include/dt-bindings/reset/realtek,rtd1195.h b/include/dt-bindings/reset/realtek,rtd1195.h
new file mode 100644
index 000000000000..27902abf935b
--- /dev/null
+++ b/include/dt-bindings/reset/realtek,rtd1195.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */
+/*
+ * Realtek RTD1195 reset controllers
+ *
+ * Copyright (c) 2017 Andreas Färber
+ */
+#ifndef DT_BINDINGS_RESET_RTD1195_H
+#define DT_BINDINGS_RESET_RTD1195_H
+
+/* soft reset 1 */
+#define RTD1195_RSTN_MISC 0
+#define RTD1195_RSTN_RNG 1
+#define RTD1195_RSTN_USB3_POW 2
+#define RTD1195_RSTN_GSPI 3
+#define RTD1195_RSTN_USB3_P0_MDIO 4
+#define RTD1195_RSTN_VE_H265 5
+#define RTD1195_RSTN_USB 6
+#define RTD1195_RSTN_USB_PHY0 8
+#define RTD1195_RSTN_USB_PHY1 9
+#define RTD1195_RSTN_HDMIRX 11
+#define RTD1195_RSTN_HDMI 12
+#define RTD1195_RSTN_ETN 14
+#define RTD1195_RSTN_AIO 15
+#define RTD1195_RSTN_GPU 16
+#define RTD1195_RSTN_VE_H264 17
+#define RTD1195_RSTN_VE_JPEG 18
+#define RTD1195_RSTN_TVE 19
+#define RTD1195_RSTN_VO 20
+#define RTD1195_RSTN_LVDS 21
+#define RTD1195_RSTN_SE 22
+#define RTD1195_RSTN_DCU 23
+#define RTD1195_RSTN_DC_PHY 24
+#define RTD1195_RSTN_CP 25
+#define RTD1195_RSTN_MD 26
+#define RTD1195_RSTN_TP 27
+#define RTD1195_RSTN_AE 28
+#define RTD1195_RSTN_NF 29
+#define RTD1195_RSTN_MIPI 30
+
+/* soft reset 2 */
+#define RTD1195_RSTN_ACPU 0
+#define RTD1195_RSTN_VCPU 1
+#define RTD1195_RSTN_PCR 9
+#define RTD1195_RSTN_CR 10
+#define RTD1195_RSTN_EMMC 11
+#define RTD1195_RSTN_SDIO 12
+#define RTD1195_RSTN_I2C_5 18
+#define RTD1195_RSTN_RTC 20
+#define RTD1195_RSTN_I2C_4 23
+#define RTD1195_RSTN_I2C_3 24
+#define RTD1195_RSTN_I2C_2 25
+#define RTD1195_RSTN_I2C_1 26
+#define RTD1195_RSTN_UR1 28
+
+/* soft reset 3 */
+#define RTD1195_RSTN_SB2 0
+
+/* iso soft reset */
+#define RTD1195_ISO_RSTN_VFD 0
+#define RTD1195_ISO_RSTN_IR 1
+#define RTD1195_ISO_RSTN_CEC0 2
+#define RTD1195_ISO_RSTN_CEC1 3
+#define RTD1195_ISO_RSTN_DP 4
+#define RTD1195_ISO_RSTN_CBUSTX 5
+#define RTD1195_ISO_RSTN_CBUSRX 6
+#define RTD1195_ISO_RSTN_EFUSE 7
+#define RTD1195_ISO_RSTN_UR0 8
+#define RTD1195_ISO_RSTN_GMAC 9
+#define RTD1195_ISO_RSTN_GPHY 10
+#define RTD1195_ISO_RSTN_I2C_0 11
+#define RTD1195_ISO_RSTN_I2C_6 12
+#define RTD1195_ISO_RSTN_CBUS 13
+
+#endif
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 07/14] ARM: dts: rtd1195: Add reset nodes
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (5 preceding siblings ...)
2019-12-02 18:21 ` [PATCH 06/14] dt-bindings: reset: Add Realtek RTD1195 Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-31 9:27 ` James Tai
2019-12-02 18:21 ` [PATCH 08/14] ARM: dts: rtd1195: Add UART resets Andreas Färber
` (7 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, Rob Herring,
Mark Rutland, devicetree
Add reset controller nodes for Realtek RTD1195 SoC.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1: From RTD1195 v4 series (James wants to change the compatible string)
arch/arm/boot/dts/rtd1195.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
index ac37366ff7c4..886845e52205 100644
--- a/arch/arm/boot/dts/rtd1195.dtsi
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -141,7 +141,33 @@
};
};
+&crt {
+ reset1: reset-controller@0 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset2: reset-controller@4 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x4 0x4>;
+ #reset-cells = <1>;
+ };
+
+ reset3: reset-controller@8 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x8 0x4>;
+ #reset-cells = <1>;
+ };
+};
+
&iso {
+ iso_reset: reset-controller@88 {
+ compatible = "snps,dw-low-reset";
+ reg = <0x88 0x4>;
+ #reset-cells = <1>;
+ };
+
wdt: watchdog@680 {
compatible = "realtek,rtd1295-watchdog";
reg = <0x680 0x100>;
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 08/14] ARM: dts: rtd1195: Add UART resets
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (6 preceding siblings ...)
2019-12-02 18:21 ` [PATCH 07/14] ARM: dts: rtd1195: Add reset nodes Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-31 9:28 ` James Tai
2019-12-02 18:21 ` [PATCH 09/14] arm64: dts: realtek: rtd16xx: Add CRT syscon node Andreas Färber
` (6 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, Rob Herring,
Mark Rutland, devicetree
Associate the UART nodes with the corresponding reset controller bits.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
v1: From RTD1195 v4 series
arch/arm/boot/dts/rtd1195.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
index 886845e52205..09acb99083c1 100644
--- a/arch/arm/boot/dts/rtd1195.dtsi
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -8,6 +8,7 @@
/memreserve/ 0x17fff000 0x00001000;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1195.h>
/ {
compatible = "realtek,rtd1195";
@@ -179,6 +180,7 @@
reg = <0x800 0x400>;
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&iso_reset RTD1195_ISO_RSTN_UR0>;
clock-frequency = <27000000>;
status = "disabled";
};
@@ -190,6 +192,7 @@
reg = <0x200 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&reset2 RTD1195_RSTN_UR1>;
clock-frequency = <27000000>;
status = "disabled";
};
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 09/14] arm64: dts: realtek: rtd16xx: Add CRT syscon node
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (7 preceding siblings ...)
2019-12-02 18:21 ` [PATCH 08/14] ARM: dts: rtd1195: Add UART resets Andreas Färber
@ 2019-12-02 18:21 ` Andreas Färber
2019-12-30 14:43 ` James Tai
2019-12-02 18:22 ` [PATCH 10/14] ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes Andreas Färber
` (5 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:21 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Prepare a CRT syscon mfd node.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
index 8f8f2b328cd1..776efc10bab2 100644
--- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -118,6 +118,15 @@
#size-cells = <1>;
ranges = <0x0 0x98000000 0x200000>;
+ crt: syscon@0 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1000>;
+ };
+
iso: syscon@7000 {
compatible = "syscon", "simple-mfd";
reg = <0x7000 0x1000>;
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 10/14] ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (8 preceding siblings ...)
2019-12-02 18:21 ` [PATCH 09/14] arm64: dts: realtek: rtd16xx: Add CRT syscon node Andreas Färber
@ 2019-12-02 18:22 ` Andreas Färber
2019-12-31 9:30 ` James Tai
2019-12-02 18:22 ` [PATCH 11/14] arm64: dts: realtek: rtd129x: " Andreas Färber
` (4 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:22 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Add syscon mfd nodes for SB2 and SCPU Wrapper to RTD1195 DT.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm/boot/dts/rtd1195.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
index 09acb99083c1..21897210d9d0 100644
--- a/arch/arm/boot/dts/rtd1195.dtsi
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -119,6 +119,15 @@
ranges = <0x0 0x7000 0x1000>;
};
+ sb2: syscon@1a000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1a000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
misc: syscon@1b000 {
compatible = "syscon", "simple-mfd";
reg = <0x1b000 0x1000>;
@@ -127,6 +136,15 @@
#size-cells = <1>;
ranges = <0x0 0x1b000 0x1000>;
};
+
+ scpu_wrapper: syscon@1d000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1d000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1d000 0x1000>;
+ };
};
gic: interrupt-controller@ff011000 {
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 11/14] arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (9 preceding siblings ...)
2019-12-02 18:22 ` [PATCH 10/14] ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes Andreas Färber
@ 2019-12-02 18:22 ` Andreas Färber
2019-12-30 14:46 ` James Tai
2019-12-02 18:22 ` [PATCH 12/14] arm64: dts: realtek: rtd139x: " Andreas Färber
` (3 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:22 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Add syscon mfd nodes for SB2 and SCPU Wrapper to RTD129x DT.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm64/boot/dts/realtek/rtd129x.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
index 34dc09790d0b..39aefe66a794 100644
--- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
@@ -81,6 +81,15 @@
ranges = <0x0 0x7000 0x1000>;
};
+ sb2: syscon@1a000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1a000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
misc: syscon@1b000 {
compatible = "syscon", "simple-mfd";
reg = <0x1b000 0x1000>;
@@ -89,6 +98,15 @@
#size-cells = <1>;
ranges = <0x0 0x1b000 0x1000>;
};
+
+ scpu_wrapper: syscon@1d000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1d000 0x2000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1d000 0x2000>;
+ };
};
gic: interrupt-controller@ff011000 {
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 12/14] arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (10 preceding siblings ...)
2019-12-02 18:22 ` [PATCH 11/14] arm64: dts: realtek: rtd129x: " Andreas Färber
@ 2019-12-02 18:22 ` Andreas Färber
2019-12-30 14:45 ` James Tai
2019-12-02 18:22 ` [PATCH 13/14] arm64: dts: realtek: rtd16xx: " Andreas Färber
` (2 subsequent siblings)
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:22 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Add syscon mfd nodes for SB2 and SCPU Wrapper to RTD139x DT.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm64/boot/dts/realtek/rtd139x.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
index 3a571f3b7e38..a3c10ceeb586 100644
--- a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
@@ -79,6 +79,15 @@
ranges = <0x0 0x7000 0x1000>;
};
+ sb2: syscon@1a000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1a000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
misc: syscon@1b000 {
compatible = "syscon", "simple-mfd";
reg = <0x1b000 0x1000>;
@@ -87,6 +96,15 @@
#size-cells = <1>;
ranges = <0x0 0x1b000 0x1000>;
};
+
+ scpu_wrapper: syscon@1d000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1d000 0x2000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1d000 0x2000>;
+ };
};
gic: interrupt-controller@ff011000 {
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 13/14] arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (11 preceding siblings ...)
2019-12-02 18:22 ` [PATCH 12/14] arm64: dts: realtek: rtd139x: " Andreas Färber
@ 2019-12-02 18:22 ` Andreas Färber
2019-12-30 14:45 ` James Tai
2019-12-02 18:22 ` [PATCH 14/14] dt-bindings: reset: rtd1295: Add SB2 reset Andreas Färber
2019-12-30 2:57 ` [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:22 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber, James Tai,
Rob Herring, Mark Rutland, devicetree
Add syscon mfd nodes for SB2 and SCPU Wrapper to RTD16xx DT.
Cc: James Tai <james.tai@realtek.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
index 776efc10bab2..bc88cf749f33 100644
--- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -136,6 +136,15 @@
ranges = <0x0 0x7000 0x1000>;
};
+ sb2: syscon@1a000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1a000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1a000 0x1000>;
+ };
+
misc: syscon@1b000 {
compatible = "syscon", "simple-mfd";
reg = <0x1b000 0x1000>;
@@ -144,6 +153,15 @@
#size-cells = <1>;
ranges = <0x0 0x1b000 0x1000>;
};
+
+ scpu_wrapper: syscon@1d000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x1d000 0x1000>;
+ reg-io-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1d000 0x1000>;
+ };
};
gic: interrupt-controller@ff100000 {
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* [PATCH 14/14] dt-bindings: reset: rtd1295: Add SB2 reset
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (12 preceding siblings ...)
2019-12-02 18:22 ` [PATCH 13/14] arm64: dts: realtek: rtd16xx: " Andreas Färber
@ 2019-12-02 18:22 ` Andreas Färber
2019-12-13 23:31 ` Rob Herring
2019-12-30 14:55 ` James Tai
2019-12-30 2:57 ` [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
14 siblings, 2 replies; 33+ messages in thread
From: Andreas Färber @ 2019-12-02 18:22 UTC (permalink / raw)
To: linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Andreas Färber,
Philipp Zabel, Rob Herring, Mark Rutland, devicetree
Add a constant for reset3 SB2, based on downstream crt_sys_reg.h.
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
include/dt-bindings/reset/realtek,rtd1295.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/dt-bindings/reset/realtek,rtd1295.h b/include/dt-bindings/reset/realtek,rtd1295.h
index 2c0cb6afe816..dd89e4c80264 100644
--- a/include/dt-bindings/reset/realtek,rtd1295.h
+++ b/include/dt-bindings/reset/realtek,rtd1295.h
@@ -75,6 +75,9 @@
#define RTD1295_RSTN_CBUS_TX 30
#define RTD1295_RSTN_SDS_PHY 31
+/* soft reset 3 */
+#define RTD1295_RSTN_SB2 0
+
/* soft reset 4 */
#define RTD1295_RSTN_DCPHY_CRT 0
#define RTD1295_RSTN_DCPHY_ALERT_RX 1
--
2.16.4
^ permalink raw reply related [flat|nested] 33+ messages in thread
* Re: [PATCH 14/14] dt-bindings: reset: rtd1295: Add SB2 reset
2019-12-02 18:22 ` [PATCH 14/14] dt-bindings: reset: rtd1295: Add SB2 reset Andreas Färber
@ 2019-12-13 23:31 ` Rob Herring
2019-12-30 14:55 ` James Tai
1 sibling, 0 replies; 33+ messages in thread
From: Rob Herring @ 2019-12-13 23:31 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-realtek-soc, linux-arm-kernel, linux-kernel,
Andreas Färber, Philipp Zabel, Mark Rutland, devicetree
On Mon, 2 Dec 2019 19:22:04 +0100, =?UTF-8?q?Andreas=20F=C3=A4rber?= wrote:
> Add a constant for reset3 SB2, based on downstream crt_sys_reg.h.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> include/dt-bindings/reset/realtek,rtd1295.h | 3 +++
> 1 file changed, 3 insertions(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 00/14] ARM: dts: realtek: Introduce syscon
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
` (13 preceding siblings ...)
2019-12-02 18:22 ` [PATCH 14/14] dt-bindings: reset: rtd1295: Add SB2 reset Andreas Färber
@ 2019-12-30 2:57 ` Andreas Färber
2019-12-31 9:47 ` James Tai
14 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2019-12-30 2:57 UTC (permalink / raw)
To: James Tai
Cc: linux-realtek-soc, devicetree, linux-kernel, Rob Herring,
linux-arm-kernel
Hi James,
Am 02.12.19 um 19:21 schrieb Andreas Färber:
> This patch series factors out system controller multi-function device nodes
> for CRT, Iso, Misc, SB2 and SCPU Wrapper IP blocks.
>
> It was inspired by my SoC info RFC, as discussed in its cover letter [1].
>
> Goal of DT is to describe the hardware, and in previous patches we've already
> introduced Realtek's r-bus as node layer. The next step here is to model
> multi-function blocks as nodes. In order to cope with 80-character line limit,
> child nodes are added via reference rather than in-place.
I'm waiting for your Acked-by of the blocks & numbers in these patches.
Other Realtek engineers are also invited to respond, of course.
Thanks in advance,
Andreas
> Andreas Färber (14):
> ARM: dts: rtd1195: Introduce iso and misc syscon
> arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon
> arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon
> arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon
> ARM: dts: rtd1195: Add CRT syscon node
> dt-bindings: reset: Add Realtek RTD1195
> ARM: dts: rtd1195: Add reset nodes
> ARM: dts: rtd1195: Add UART resets
> arm64: dts: realtek: rtd16xx: Add CRT syscon node
> ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes
> arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes
> arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes
> arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes
> dt-bindings: reset: rtd1295: Add SB2 reset
>
> arch/arm/boot/dts/rtd1195.dtsi | 110 ++++++++++++++++---
> arch/arm64/boot/dts/realtek/rtd129x.dtsi | 157 ++++++++++++++++++----------
> arch/arm64/boot/dts/realtek/rtd139x.dtsi | 157 ++++++++++++++++++----------
> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 91 ++++++++++++----
> include/dt-bindings/reset/realtek,rtd1195.h | 74 +++++++++++++
> include/dt-bindings/reset/realtek,rtd1295.h | 3 +
> 6 files changed, 449 insertions(+), 143 deletions(-)
> create mode 100644 include/dt-bindings/reset/realtek,rtd1195.h
--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 04/14] arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon
2019-12-02 18:21 ` [PATCH 04/14] arm64: dts: realtek: rtd16xx: Introduce " Andreas Färber
@ 2019-12-30 5:53 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-30 5:53 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Group UART0 into an Isolation syscon mfd node.
> Group UART1 and UART2 into a Miscellaneous syscon mfd node.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 70
> +++++++++++++++++++++-----------
> 1 file changed, 46 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> index 69cc0d941c8d..8f8f2b328cd1 100644
> --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> @@ -118,34 +118,22 @@
> #size-cells = <1>;
> ranges = <0x0 0x98000000 0x200000>;
>
> - uart0: serial0@7800 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x7800 0x400>;
> - reg-shift = <2>;
> + iso: syscon@7000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x7000 0x1000>;
> reg-io-width = <4>;
> - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> - clock-frequency = <27000000>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x7000 0x1000>;
> };
>
> - uart1: serial1@1b200 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x1b200 0x400>;
> - reg-shift = <2>;
> + misc: syscon@1b000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1b000 0x1000>;
> reg-io-width = <4>;
> - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> - clock-frequency = <432000000>;
> - status = "disabled";
> - };
> -
> - uart2: serial2@1b400 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x1b400 0x400>;
> - reg-shift = <2>;
> - reg-io-width = <4>;
> - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> - clock-frequency = <432000000>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1b000 0x1000>;
> };
> };
>
> @@ -159,3 +147,37 @@
> };
> };
> };
> +
> +&iso {
> + uart0: serial0@800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x800 0x400>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <27000000>;
> + status = "disabled";
> + };
> +};
> +
> +&misc {
> + uart1: serial1@200 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x200 0x400>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <432000000>;
> + status = "disabled";
> + };
> +
> + uart2: serial2@400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x400 0x400>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <432000000>;
> + status = "disabled";
> + };
> +};
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 03/14] arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon
2019-12-02 18:21 ` [PATCH 03/14] arm64: dts: realtek: rtd139x: " Andreas Färber
@ 2019-12-30 14:39 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-30 14:39 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Group the non-iso reset controller nodes into a CRT syscon mfd node.
> Group reset controller, watchdog and UART0 into an Isolation mfd node.
> Group UART1 and UART2 into a Miscellaneous syscon mfd node.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm64/boot/dts/realtek/rtd139x.dtsi | 147
> +++++++++++++++++++------------
> 1 file changed, 90 insertions(+), 57 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> index c11a505e43e2..3a571f3b7e38 100644
> --- a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> @@ -61,70 +61,31 @@
> #size-cells = <1>;
> ranges = <0x0 0x98000000 0x200000>;
>
> - reset1: reset-controller@0 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x0 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset2: reset-controller@4 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x4 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset3: reset-controller@8 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x8 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset4: reset-controller@50 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x50 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - iso_reset: reset-controller@7088 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x7088 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - wdt: watchdog@7680 {
> - compatible = "realtek,rtd1295-watchdog";
> - reg = <0x7680 0x100>;
> - clocks = <&osc27M>;
> - };
> -
> - uart0: serial@7800 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x7800 0x400>;
> - reg-shift = <2>;
> + crt: syscon@0 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x0 0x1000>;
> reg-io-width = <4>;
> - clock-frequency = <27000000>;
> - resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x1000>;
> };
>
> - uart1: serial@1b200 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x1b200 0x100>;
> - reg-shift = <2>;
> + iso: syscon@7000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x7000 0x1000>;
> reg-io-width = <4>;
> - clock-frequency = <432000000>;
> - resets = <&reset2 RTD1295_RSTN_UR1>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x7000 0x1000>;
> };
>
> - uart2: serial@1b400 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x1b400 0x100>;
> - reg-shift = <2>;
> + misc: syscon@1b000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1b000 0x1000>;
> reg-io-width = <4>;
> - clock-frequency = <432000000>;
> - resets = <&reset2 RTD1295_RSTN_UR2>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1b000 0x1000>;
> };
> };
>
> @@ -140,3 +101,75 @@
> };
> };
> };
> +
> +&crt {
> + reset1: reset-controller@0 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x0 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset2: reset-controller@4 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x4 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset3: reset-controller@8 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x8 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset4: reset-controller@50 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x50 0x4>;
> + #reset-cells = <1>;
> + };
> +};
> +
> +&iso {
> + iso_reset: reset-controller@88 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x88 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + wdt: watchdog@680 {
> + compatible = "realtek,rtd1295-watchdog";
> + reg = <0x680 0x100>;
> + clocks = <&osc27M>;
> + };
> +
> + uart0: serial@800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x800 0x400>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <27000000>;
> + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
> + status = "disabled";
> + };
> +};
> +
> +&misc {
> + uart1: serial@200 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x200 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <432000000>;
> + resets = <&reset2 RTD1295_RSTN_UR1>;
> + status = "disabled";
> + };
> +
> + uart2: serial@400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x400 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <432000000>;
> + resets = <&reset2 RTD1295_RSTN_UR2>;
> + status = "disabled";
> + };
> +};
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 02/14] arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon
2019-12-02 18:21 ` [PATCH 02/14] arm64: dts: realtek: rtd129x: Introduce CRT, " Andreas Färber
@ 2019-12-30 14:40 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-30 14:40 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Group the non-iso reset controller nodes in a CRT syscon mfd node.
> Group reset controller, watchdog and UART0 in an Isolation syscon mfd node.
> Group UART1 and UART2 into a Miscellaneous syscon mfd node.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm64/boot/dts/realtek/rtd129x.dtsi | 147
> +++++++++++++++++++------------
> 1 file changed, 90 insertions(+), 57 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi
> b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
> index 0de9e675be16..34dc09790d0b 100644
> --- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
> @@ -63,70 +63,31 @@
> #size-cells = <1>;
> ranges = <0x0 0x98000000 0x200000>;
>
> - reset1: reset-controller@0 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x0 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset2: reset-controller@4 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x4 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset3: reset-controller@8 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x8 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - reset4: reset-controller@50 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x50 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - iso_reset: reset-controller@7088 {
> - compatible = "snps,dw-low-reset";
> - reg = <0x7088 0x4>;
> - #reset-cells = <1>;
> - };
> -
> - wdt: watchdog@7680 {
> - compatible = "realtek,rtd1295-watchdog";
> - reg = <0x7680 0x100>;
> - clocks = <&osc27M>;
> - };
> -
> - uart0: serial@7800 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x7800 0x400>;
> - reg-shift = <2>;
> + crt: syscon@0 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x0 0x1800>;
> reg-io-width = <4>;
> - clock-frequency = <27000000>;
> - resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x1800>;
> };
>
> - uart1: serial@1b200 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x1b200 0x100>;
> - reg-shift = <2>;
> + iso: syscon@7000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x7000 0x1000>;
> reg-io-width = <4>;
> - clock-frequency = <432000000>;
> - resets = <&reset2 RTD1295_RSTN_UR1>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x7000 0x1000>;
> };
>
> - uart2: serial@1b400 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x1b400 0x100>;
> - reg-shift = <2>;
> + misc: syscon@1b000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1b000 0x1000>;
> reg-io-width = <4>;
> - clock-frequency = <432000000>;
> - resets = <&reset2 RTD1295_RSTN_UR2>;
> - status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1b000 0x1000>;
> };
> };
>
> @@ -142,3 +103,75 @@
> };
> };
> };
> +
> +&crt {
> + reset1: reset-controller@0 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x0 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset2: reset-controller@4 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x4 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset3: reset-controller@8 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x8 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset4: reset-controller@50 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x50 0x4>;
> + #reset-cells = <1>;
> + };
> +};
> +
> +&iso {
> + iso_reset: reset-controller@88 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x88 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + wdt: watchdog@680 {
> + compatible = "realtek,rtd1295-watchdog";
> + reg = <0x680 0x100>;
> + clocks = <&osc27M>;
> + };
> +
> + uart0: serial@800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x800 0x400>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <27000000>;
> + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
> + status = "disabled";
> + };
> +};
> +
> +&misc {
> + uart1: serial@200 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x200 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <432000000>;
> + resets = <&reset2 RTD1295_RSTN_UR1>;
> + status = "disabled";
> + };
> +
> + uart2: serial@400 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x400 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <432000000>;
> + resets = <&reset2 RTD1295_RSTN_UR2>;
> + status = "disabled";
> + };
> +};
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 09/14] arm64: dts: realtek: rtd16xx: Add CRT syscon node
2019-12-02 18:21 ` [PATCH 09/14] arm64: dts: realtek: rtd16xx: Add CRT syscon node Andreas Färber
@ 2019-12-30 14:43 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-30 14:43 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Prepare a CRT syscon mfd node.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> index 8f8f2b328cd1..776efc10bab2 100644
> --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> @@ -118,6 +118,15 @@
> #size-cells = <1>;
> ranges = <0x0 0x98000000 0x200000>;
>
> + crt: syscon@0 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x0 0x1000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x1000>;
> + };
> +
> iso: syscon@7000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x7000 0x1000>;
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 13/14] arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes
2019-12-02 18:22 ` [PATCH 13/14] arm64: dts: realtek: rtd16xx: " Andreas Färber
@ 2019-12-30 14:45 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-30 14:45 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Add syscon mfd nodes for SB2 and SCPU Wrapper to RTD16xx DT.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm64/boot/dts/realtek/rtd16xx.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> index 776efc10bab2..bc88cf749f33 100644
> --- a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
> @@ -136,6 +136,15 @@
> ranges = <0x0 0x7000 0x1000>;
> };
>
> + sb2: syscon@1a000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1a000 0x1000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1a000 0x1000>;
> + };
> +
> misc: syscon@1b000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x1b000 0x1000>;
> @@ -144,6 +153,15 @@
> #size-cells = <1>;
> ranges = <0x0 0x1b000 0x1000>;
> };
> +
> + scpu_wrapper: syscon@1d000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1d000 0x1000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1d000 0x1000>;
> + };
> };
>
> gic: interrupt-controller@ff100000 {
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 12/14] arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes
2019-12-02 18:22 ` [PATCH 12/14] arm64: dts: realtek: rtd139x: " Andreas Färber
@ 2019-12-30 14:45 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-30 14:45 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Add syscon mfd nodes for SB2 and SCPU Wrapper to RTD139x DT.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm64/boot/dts/realtek/rtd139x.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> index 3a571f3b7e38..a3c10ceeb586 100644
> --- a/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
> @@ -79,6 +79,15 @@
> ranges = <0x0 0x7000 0x1000>;
> };
>
> + sb2: syscon@1a000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1a000 0x1000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1a000 0x1000>;
> + };
> +
> misc: syscon@1b000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x1b000 0x1000>;
> @@ -87,6 +96,15 @@
> #size-cells = <1>;
> ranges = <0x0 0x1b000 0x1000>;
> };
> +
> + scpu_wrapper: syscon@1d000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1d000 0x2000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1d000 0x2000>;
> + };
> };
>
> gic: interrupt-controller@ff011000 {
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 11/14] arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes
2019-12-02 18:22 ` [PATCH 11/14] arm64: dts: realtek: rtd129x: " Andreas Färber
@ 2019-12-30 14:46 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-30 14:46 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Add syscon mfd nodes for SB2 and SCPU Wrapper to RTD129x DT.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm64/boot/dts/realtek/rtd129x.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi
> b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
> index 34dc09790d0b..39aefe66a794 100644
> --- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi
> +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
> @@ -81,6 +81,15 @@
> ranges = <0x0 0x7000 0x1000>;
> };
>
> + sb2: syscon@1a000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1a000 0x1000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1a000 0x1000>;
> + };
> +
> misc: syscon@1b000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x1b000 0x1000>;
> @@ -89,6 +98,15 @@
> #size-cells = <1>;
> ranges = <0x0 0x1b000 0x1000>;
> };
> +
> + scpu_wrapper: syscon@1d000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1d000 0x2000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1d000 0x2000>;
> + };
> };
>
> gic: interrupt-controller@ff011000 {
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 14/14] dt-bindings: reset: rtd1295: Add SB2 reset
2019-12-02 18:22 ` [PATCH 14/14] dt-bindings: reset: rtd1295: Add SB2 reset Andreas Färber
2019-12-13 23:31 ` Rob Herring
@ 2019-12-30 14:55 ` James Tai
1 sibling, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-30 14:55 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: Mark Rutland, devicetree, linux-kernel, Rob Herring,
Philipp Zabel, linux-arm-kernel
> Add a constant for reset3 SB2, based on downstream crt_sys_reg.h.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> include/dt-bindings/reset/realtek,rtd1295.h | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/include/dt-bindings/reset/realtek,rtd1295.h
> b/include/dt-bindings/reset/realtek,rtd1295.h
> index 2c0cb6afe816..dd89e4c80264 100644
> --- a/include/dt-bindings/reset/realtek,rtd1295.h
> +++ b/include/dt-bindings/reset/realtek,rtd1295.h
> @@ -75,6 +75,9 @@
> #define RTD1295_RSTN_CBUS_TX 30
> #define RTD1295_RSTN_SDS_PHY 31
>
> +/* soft reset 3 */
> +#define RTD1295_RSTN_SB2 0
> +
> /* soft reset 4 */
> #define RTD1295_RSTN_DCPHY_CRT 0
> #define RTD1295_RSTN_DCPHY_ALERT_RX 1
> --
> 2.16.4
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 05/14] ARM: dts: rtd1195: Add CRT syscon node
2019-12-02 18:21 ` [PATCH 05/14] ARM: dts: rtd1195: Add CRT syscon node Andreas Färber
@ 2019-12-31 9:16 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-31 9:16 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Prepare a CRT syscon mfd node.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm/boot/dts/rtd1195.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
> index a74f530dc439..ac37366ff7c4 100644
> --- a/arch/arm/boot/dts/rtd1195.dtsi
> +++ b/arch/arm/boot/dts/rtd1195.dtsi
> @@ -100,6 +100,15 @@
> #size-cells = <1>;
> ranges = <0x0 0x18000000 0x70000>;
>
> + crt: syscon@0 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x0 0x1000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x1000>;
> + };
> +
> iso: syscon@7000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x7000 0x1000>;
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 06/14] dt-bindings: reset: Add Realtek RTD1195
2019-12-02 18:21 ` [PATCH 06/14] dt-bindings: reset: Add Realtek RTD1195 Andreas Färber
@ 2019-12-31 9:25 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-31 9:25 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: Mark Rutland, devicetree, linux-kernel, Rob Herring,
Philipp Zabel, linux-arm-kernel
> Add a header with symbolic reset indices for Realtek RTD1195 SoC.
> Naming was derived from BSP register description headers.
>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v1: From RTD1195 v4 series
>
> include/dt-bindings/reset/realtek,rtd1195.h | 74
> +++++++++++++++++++++++++++++
> 1 file changed, 74 insertions(+)
> create mode 100644 include/dt-bindings/reset/realtek,rtd1195.h
>
> diff --git a/include/dt-bindings/reset/realtek,rtd1195.h
> b/include/dt-bindings/reset/realtek,rtd1195.h
> new file mode 100644
> index 000000000000..27902abf935b
> --- /dev/null
> +++ b/include/dt-bindings/reset/realtek,rtd1195.h
> @@ -0,0 +1,74 @@
> +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */
> +/*
> + * Realtek RTD1195 reset controllers
> + *
> + * Copyright (c) 2017 Andreas Färber
> + */
> +#ifndef DT_BINDINGS_RESET_RTD1195_H
> +#define DT_BINDINGS_RESET_RTD1195_H
> +
> +/* soft reset 1 */
> +#define RTD1195_RSTN_MISC 0
> +#define RTD1195_RSTN_RNG 1
> +#define RTD1195_RSTN_USB3_POW 2
> +#define RTD1195_RSTN_GSPI 3
> +#define RTD1195_RSTN_USB3_P0_MDIO 4
> +#define RTD1195_RSTN_VE_H265 5
> +#define RTD1195_RSTN_USB 6
> +#define RTD1195_RSTN_USB_PHY0 8
> +#define RTD1195_RSTN_USB_PHY1 9
> +#define RTD1195_RSTN_HDMIRX 11
> +#define RTD1195_RSTN_HDMI 12
> +#define RTD1195_RSTN_ETN 14
> +#define RTD1195_RSTN_AIO 15
> +#define RTD1195_RSTN_GPU 16
> +#define RTD1195_RSTN_VE_H264 17
> +#define RTD1195_RSTN_VE_JPEG 18
> +#define RTD1195_RSTN_TVE 19
> +#define RTD1195_RSTN_VO 20
> +#define RTD1195_RSTN_LVDS 21
> +#define RTD1195_RSTN_SE 22
> +#define RTD1195_RSTN_DCU 23
> +#define RTD1195_RSTN_DC_PHY 24
> +#define RTD1195_RSTN_CP 25
> +#define RTD1195_RSTN_MD 26
> +#define RTD1195_RSTN_TP 27
> +#define RTD1195_RSTN_AE 28
> +#define RTD1195_RSTN_NF 29
> +#define RTD1195_RSTN_MIPI 30
> +
> +/* soft reset 2 */
> +#define RTD1195_RSTN_ACPU 0
> +#define RTD1195_RSTN_VCPU 1
> +#define RTD1195_RSTN_PCR 9
> +#define RTD1195_RSTN_CR 10
> +#define RTD1195_RSTN_EMMC 11
> +#define RTD1195_RSTN_SDIO 12
> +#define RTD1195_RSTN_I2C_5 18
> +#define RTD1195_RSTN_RTC 20
> +#define RTD1195_RSTN_I2C_4 23
> +#define RTD1195_RSTN_I2C_3 24
> +#define RTD1195_RSTN_I2C_2 25
> +#define RTD1195_RSTN_I2C_1 26
> +#define RTD1195_RSTN_UR1 28
> +
> +/* soft reset 3 */
> +#define RTD1195_RSTN_SB2 0
> +
> +/* iso soft reset */
> +#define RTD1195_ISO_RSTN_VFD 0
> +#define RTD1195_ISO_RSTN_IR 1
> +#define RTD1195_ISO_RSTN_CEC0 2
> +#define RTD1195_ISO_RSTN_CEC1 3
> +#define RTD1195_ISO_RSTN_DP 4
> +#define RTD1195_ISO_RSTN_CBUSTX 5
> +#define RTD1195_ISO_RSTN_CBUSRX 6
> +#define RTD1195_ISO_RSTN_EFUSE 7
> +#define RTD1195_ISO_RSTN_UR0 8
> +#define RTD1195_ISO_RSTN_GMAC 9
> +#define RTD1195_ISO_RSTN_GPHY 10
> +#define RTD1195_ISO_RSTN_I2C_0 11
> +#define RTD1195_ISO_RSTN_I2C_6 12
> +#define RTD1195_ISO_RSTN_CBUS 13
> +
> +#endif
> --
> 2.16.4
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 07/14] ARM: dts: rtd1195: Add reset nodes
2019-12-02 18:21 ` [PATCH 07/14] ARM: dts: rtd1195: Add reset nodes Andreas Färber
@ 2019-12-31 9:27 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-31 9:27 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: Mark Rutland, devicetree, linux-kernel, Rob Herring, linux-arm-kernel
> Add reset controller nodes for Realtek RTD1195 SoC.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v1: From RTD1195 v4 series (James wants to change the compatible string)
>
> arch/arm/boot/dts/rtd1195.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
> index ac37366ff7c4..886845e52205 100644
> --- a/arch/arm/boot/dts/rtd1195.dtsi
> +++ b/arch/arm/boot/dts/rtd1195.dtsi
> @@ -141,7 +141,33 @@
> };
> };
>
> +&crt {
> + reset1: reset-controller@0 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x0 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset2: reset-controller@4 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x4 0x4>;
> + #reset-cells = <1>;
> + };
> +
> + reset3: reset-controller@8 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x8 0x4>;
> + #reset-cells = <1>;
> + };
> +};
> +
> &iso {
> + iso_reset: reset-controller@88 {
> + compatible = "snps,dw-low-reset";
> + reg = <0x88 0x4>;
> + #reset-cells = <1>;
> + };
> +
> wdt: watchdog@680 {
> compatible = "realtek,rtd1295-watchdog";
> reg = <0x680 0x100>;
> --
> 2.16.4
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 08/14] ARM: dts: rtd1195: Add UART resets
2019-12-02 18:21 ` [PATCH 08/14] ARM: dts: rtd1195: Add UART resets Andreas Färber
@ 2019-12-31 9:28 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-31 9:28 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: Mark Rutland, devicetree, linux-kernel, Rob Herring, linux-arm-kernel
> Associate the UART nodes with the corresponding reset controller bits.
>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> v1: From RTD1195 v4 series
>
> arch/arm/boot/dts/rtd1195.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
> index 886845e52205..09acb99083c1 100644
> --- a/arch/arm/boot/dts/rtd1195.dtsi
> +++ b/arch/arm/boot/dts/rtd1195.dtsi
> @@ -8,6 +8,7 @@
> /memreserve/ 0x17fff000 0x00001000;
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/reset/realtek,rtd1195.h>
>
> / {
> compatible = "realtek,rtd1195";
> @@ -179,6 +180,7 @@
> reg = <0x800 0x400>;
> reg-shift = <2>;
> reg-io-width = <4>;
> + resets = <&iso_reset RTD1195_ISO_RSTN_UR0>;
> clock-frequency = <27000000>;
> status = "disabled";
> };
> @@ -190,6 +192,7 @@
> reg = <0x200 0x100>;
> reg-shift = <2>;
> reg-io-width = <4>;
> + resets = <&reset2 RTD1195_RSTN_UR1>;
> clock-frequency = <27000000>;
> status = "disabled";
> };
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 10/14] ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes
2019-12-02 18:22 ` [PATCH 10/14] ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes Andreas Färber
@ 2019-12-31 9:30 ` James Tai
0 siblings, 0 replies; 33+ messages in thread
From: James Tai @ 2019-12-31 9:30 UTC (permalink / raw)
To: Andreas Färber, linux-realtek-soc
Cc: linux-arm-kernel, linux-kernel, Rob Herring, Mark Rutland, devicetree
> Add syscon mfd nodes for SB2 and SCPU Wrapper to RTD1195 DT.
>
> Cc: James Tai <james.tai@realtek.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> arch/arm/boot/dts/rtd1195.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
> index 09acb99083c1..21897210d9d0 100644
> --- a/arch/arm/boot/dts/rtd1195.dtsi
> +++ b/arch/arm/boot/dts/rtd1195.dtsi
> @@ -119,6 +119,15 @@
> ranges = <0x0 0x7000 0x1000>;
> };
>
> + sb2: syscon@1a000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1a000 0x1000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1a000 0x1000>;
> + };
> +
> misc: syscon@1b000 {
> compatible = "syscon", "simple-mfd";
> reg = <0x1b000 0x1000>;
> @@ -127,6 +136,15 @@
> #size-cells = <1>;
> ranges = <0x0 0x1b000 0x1000>;
> };
> +
> + scpu_wrapper: syscon@1d000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x1d000 0x1000>;
> + reg-io-width = <4>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1d000 0x1000>;
> + };
> };
>
> gic: interrupt-controller@ff011000 {
> --
> 2.16.4
>
>
Acked-by: James Tai <james.tai@realtek.com>
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: [PATCH 00/14] ARM: dts: realtek: Introduce syscon
2019-12-30 2:57 ` [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
@ 2019-12-31 9:47 ` James Tai
2020-01-03 2:58 ` Andreas Färber
0 siblings, 1 reply; 33+ messages in thread
From: James Tai @ 2019-12-31 9:47 UTC (permalink / raw)
To: Andreas Färber
Cc: linux-realtek-soc, devicetree, linux-kernel, Rob Herring,
linux-arm-kernel
Hi Andreas,
>
> I'm waiting for your Acked-by of the blocks & numbers in these patches.
> Other Realtek engineers are also invited to respond, of course.
I have reviewed these patches.
Thank you for your contribution.
Regards,
James
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 00/14] ARM: dts: realtek: Introduce syscon
2019-12-31 9:47 ` James Tai
@ 2020-01-03 2:58 ` Andreas Färber
2020-01-15 13:26 ` Andreas Färber
0 siblings, 1 reply; 33+ messages in thread
From: Andreas Färber @ 2020-01-03 2:58 UTC (permalink / raw)
To: James Tai
Cc: linux-realtek-soc, devicetree, linux-kernel, Rob Herring,
linux-arm-kernel
Hi James,
Am 31.12.19 um 10:47 schrieb James Tai:
>> I'm waiting for your Acked-by of the blocks & numbers in these patches.
>> Other Realtek engineers are also invited to respond, of course.
>
> I have reviewed these patches.
Thanks - does anything need changes in patch 01 or is that ack'ed, too?
Regards,
Andreas
--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: [PATCH 00/14] ARM: dts: realtek: Introduce syscon
2020-01-03 2:58 ` Andreas Färber
@ 2020-01-15 13:26 ` Andreas Färber
0 siblings, 0 replies; 33+ messages in thread
From: Andreas Färber @ 2020-01-15 13:26 UTC (permalink / raw)
To: James Tai, linux-realtek-soc
Cc: devicetree, Rob Herring, linux-kernel, linux-arm-kernel
Am 03.01.20 um 03:58 schrieb Andreas Färber:
> Hi James,
>
> Am 31.12.19 um 10:47 schrieb James Tai:
>>> I'm waiting for your Acked-by of the blocks & numbers in these patches.
>>> Other Realtek engineers are also invited to respond, of course.
>>
>> I have reviewed these patches.
>
> Thanks - does anything need changes in patch 01 or is that ack'ed, too?
No further response, so all (incl. 01/14) applied to linux-realtek.git:
https://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek.git/log/?h=v5.6/dt
Should there be anything wrong with 01/14, just send a follow-up patch.
Regards,
Andreas
--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2020-01-15 13:27 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-02 18:21 [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
2019-12-02 18:21 ` [PATCH 01/14] ARM: dts: rtd1195: Introduce iso and misc syscon Andreas Färber
2019-12-02 18:21 ` [PATCH 02/14] arm64: dts: realtek: rtd129x: Introduce CRT, " Andreas Färber
2019-12-30 14:40 ` James Tai
2019-12-02 18:21 ` [PATCH 03/14] arm64: dts: realtek: rtd139x: " Andreas Färber
2019-12-30 14:39 ` James Tai
2019-12-02 18:21 ` [PATCH 04/14] arm64: dts: realtek: rtd16xx: Introduce " Andreas Färber
2019-12-30 5:53 ` James Tai
2019-12-02 18:21 ` [PATCH 05/14] ARM: dts: rtd1195: Add CRT syscon node Andreas Färber
2019-12-31 9:16 ` James Tai
2019-12-02 18:21 ` [PATCH 06/14] dt-bindings: reset: Add Realtek RTD1195 Andreas Färber
2019-12-31 9:25 ` James Tai
2019-12-02 18:21 ` [PATCH 07/14] ARM: dts: rtd1195: Add reset nodes Andreas Färber
2019-12-31 9:27 ` James Tai
2019-12-02 18:21 ` [PATCH 08/14] ARM: dts: rtd1195: Add UART resets Andreas Färber
2019-12-31 9:28 ` James Tai
2019-12-02 18:21 ` [PATCH 09/14] arm64: dts: realtek: rtd16xx: Add CRT syscon node Andreas Färber
2019-12-30 14:43 ` James Tai
2019-12-02 18:22 ` [PATCH 10/14] ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes Andreas Färber
2019-12-31 9:30 ` James Tai
2019-12-02 18:22 ` [PATCH 11/14] arm64: dts: realtek: rtd129x: " Andreas Färber
2019-12-30 14:46 ` James Tai
2019-12-02 18:22 ` [PATCH 12/14] arm64: dts: realtek: rtd139x: " Andreas Färber
2019-12-30 14:45 ` James Tai
2019-12-02 18:22 ` [PATCH 13/14] arm64: dts: realtek: rtd16xx: " Andreas Färber
2019-12-30 14:45 ` James Tai
2019-12-02 18:22 ` [PATCH 14/14] dt-bindings: reset: rtd1295: Add SB2 reset Andreas Färber
2019-12-13 23:31 ` Rob Herring
2019-12-30 14:55 ` James Tai
2019-12-30 2:57 ` [PATCH 00/14] ARM: dts: realtek: Introduce syscon Andreas Färber
2019-12-31 9:47 ` James Tai
2020-01-03 2:58 ` Andreas Färber
2020-01-15 13:26 ` Andreas Färber
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).