* [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe
@ 2020-12-06 17:05 Jiri Olsa
2020-12-06 17:05 ` [PATCH 1/3] perf tools: Add evlist__disable_evsel/evlist__enable_evsel Jiri Olsa
` (3 more replies)
0 siblings, 4 replies; 25+ messages in thread
From: Jiri Olsa @ 2020-12-06 17:05 UTC (permalink / raw)
To: Arnaldo Carvalho de Melo
Cc: lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim,
Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian,
Alexei Budankov
hi,
adding support to enable/disable specific events via control
file via following commands:
# echo enable-sched:sched_process_fork > control
# echo disabled-sched:sched_process_fork > control
The code is available in here:
git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
perf/control
thanks,
jirka
---
Jiri Olsa (3):
perf tools: Add evlist__disable_evsel/evlist__enable_evsel
perf tools: Allow to enable/disable events via control file
perf tools: Allow to list events via control file
tools/perf/builtin-record.c | 3 +++
tools/perf/builtin-stat.c | 3 +++
tools/perf/util/evlist.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
tools/perf/util/evlist.h | 8 ++++++++
4 files changed, 115 insertions(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 25+ messages in thread* [PATCH 1/3] perf tools: Add evlist__disable_evsel/evlist__enable_evsel 2020-12-06 17:05 [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe Jiri Olsa @ 2020-12-06 17:05 ` Jiri Olsa 2020-12-07 17:12 ` Alexei Budankov 2020-12-06 17:05 ` [PATCH 2/3] perf tools: Allow to enable/disable events via control file Jiri Olsa ` (2 subsequent siblings) 3 siblings, 1 reply; 25+ messages in thread From: Jiri Olsa @ 2020-12-06 17:05 UTC (permalink / raw) To: Arnaldo Carvalho de Melo Cc: lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian, Alexei Budankov Adding interface to enable/disable single event in the evlist based on its name. It will be used later in new control enable/disable interface. Keeping the evlist::enabled true when one or more events are enabled so the toggle can work properly and toggle evlist to disabled state. Signed-off-by: Jiri Olsa <jolsa@kernel.org> --- tools/perf/util/evlist.c | 69 ++++++++++++++++++++++++++++++++++++++-- tools/perf/util/evlist.h | 2 ++ 2 files changed, 68 insertions(+), 3 deletions(-) diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index 493819173a8e..70aff26612a9 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -370,7 +370,30 @@ bool evsel__cpu_iter_skip(struct evsel *ev, int cpu) return true; } -void evlist__disable(struct evlist *evlist) +static int evsel__strcmp(struct evsel *pos, char *evsel_name) +{ + if (!evsel_name) + return 0; + if (evsel__is_dummy_event(pos)) + return 1; + return strcmp(pos->name, evsel_name); +} + +static int evlist__is_enabled(struct evlist *evlist) +{ + struct evsel *pos; + + evlist__for_each_entry(evlist, pos) { + if (!evsel__is_group_leader(pos) || !pos->core.fd) + continue; + /* If at least one event is enabled, evlist is enabled. */ + if (!pos->disabled) + return true; + } + return false; +} + +static void __evlist__disable(struct evlist *evlist, char *evsel_name) { struct evsel *pos; struct affinity affinity; @@ -386,6 +409,8 @@ void evlist__disable(struct evlist *evlist) affinity__set(&affinity, cpu); evlist__for_each_entry(evlist, pos) { + if (evsel__strcmp(pos, evsel_name)) + continue; if (evsel__cpu_iter_skip(pos, cpu)) continue; if (pos->disabled || !evsel__is_group_leader(pos) || !pos->core.fd) @@ -403,15 +428,34 @@ void evlist__disable(struct evlist *evlist) affinity__cleanup(&affinity); evlist__for_each_entry(evlist, pos) { + if (evsel__strcmp(pos, evsel_name)) + continue; if (!evsel__is_group_leader(pos) || !pos->core.fd) continue; pos->disabled = true; } - evlist->enabled = false; + /* + * If we disabled only single event, we need to check + * the enabled state of the evlist manually. + */ + if (evsel_name) + evlist->enabled = evlist__is_enabled(evlist); + else + evlist->enabled = false; +} + +void evlist__disable(struct evlist *evlist) +{ + __evlist__disable(evlist, NULL); +} + +void evlist__disable_evsel(struct evlist *evlist, char *evsel_name) +{ + __evlist__disable(evlist, evsel_name); } -void evlist__enable(struct evlist *evlist) +static void __evlist__enable(struct evlist *evlist, char *evsel_name) { struct evsel *pos; struct affinity affinity; @@ -424,6 +468,8 @@ void evlist__enable(struct evlist *evlist) affinity__set(&affinity, cpu); evlist__for_each_entry(evlist, pos) { + if (evsel__strcmp(pos, evsel_name)) + continue; if (evsel__cpu_iter_skip(pos, cpu)) continue; if (!evsel__is_group_leader(pos) || !pos->core.fd) @@ -433,14 +479,31 @@ void evlist__enable(struct evlist *evlist) } affinity__cleanup(&affinity); evlist__for_each_entry(evlist, pos) { + if (evsel__strcmp(pos, evsel_name)) + continue; if (!evsel__is_group_leader(pos) || !pos->core.fd) continue; pos->disabled = false; } + /* + * Even single event sets the 'enabled' for evlist, + * so the toggle can work properly and toggle to + * 'disabled' state. + */ evlist->enabled = true; } +void evlist__enable(struct evlist *evlist) +{ + __evlist__enable(evlist, NULL); +} + +void evlist__enable_evsel(struct evlist *evlist, char *evsel_name) +{ + __evlist__enable(evlist, evsel_name); +} + void evlist__toggle_enable(struct evlist *evlist) { (evlist->enabled ? evlist__disable : evlist__enable)(evlist); diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index 9b0c795736bb..1aae75895dea 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -186,6 +186,8 @@ size_t evlist__mmap_size(unsigned long pages); void evlist__disable(struct evlist *evlist); void evlist__enable(struct evlist *evlist); void evlist__toggle_enable(struct evlist *evlist); +void evlist__disable_evsel(struct evlist *evlist, char *evsel_name); +void evlist__enable_evsel(struct evlist *evlist, char *evsel_name); int evlist__enable_event_idx(struct evlist *evlist, struct evsel *evsel, int idx); -- 2.26.2 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 1/3] perf tools: Add evlist__disable_evsel/evlist__enable_evsel 2020-12-06 17:05 ` [PATCH 1/3] perf tools: Add evlist__disable_evsel/evlist__enable_evsel Jiri Olsa @ 2020-12-07 17:12 ` Alexei Budankov 0 siblings, 0 replies; 25+ messages in thread From: Alexei Budankov @ 2020-12-07 17:12 UTC (permalink / raw) To: Jiri Olsa, Arnaldo Carvalho de Melo Cc: lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Hi, On 06.12.2020 20:05, Jiri Olsa wrote: > Adding interface to enable/disable single event in the > evlist based on its name. It will be used later in new > control enable/disable interface. > > Keeping the evlist::enabled true when one or more events > are enabled so the toggle can work properly and toggle > evlist to disabled state. > > Signed-off-by: Jiri Olsa <jolsa@kernel.org> > --- > tools/perf/util/evlist.c | 69 ++++++++++++++++++++++++++++++++++++++-- > tools/perf/util/evlist.h | 2 ++ > 2 files changed, 68 insertions(+), 3 deletions(-) Acked-by: Alexei Budankov <abudankov@huawei.com> Regards, Alexei ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-06 17:05 [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe Jiri Olsa 2020-12-06 17:05 ` [PATCH 1/3] perf tools: Add evlist__disable_evsel/evlist__enable_evsel Jiri Olsa @ 2020-12-06 17:05 ` Jiri Olsa 2020-12-07 17:02 ` Alexei Budankov 2020-12-06 17:05 ` [PATCH 3/3] perf tools: Allow to list " Jiri Olsa 2020-12-07 13:25 ` [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe Namhyung Kim 3 siblings, 1 reply; 25+ messages in thread From: Jiri Olsa @ 2020-12-06 17:05 UTC (permalink / raw) To: Arnaldo Carvalho de Melo Cc: lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian, Alexei Budankov Adding new control events to enable/disable specific event. The interface string for control file are: 'enable-<EVENT NAME>' 'disable-<EVENT NAME>' when received the command, perf will scan the current evlist for <EVENT NAME> and if found it's enabled/disabled. Example session: terminal 1: # mkfifo control ack perf.pipe # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe Events disabled terminal 2: # cat perf.pipe | ./perf --no-pager script -i - terminal 3: # echo enable-sched:sched_process_fork > control terminal 1: # mkfifo control ack perf.pipe # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe ... event sched:sched_process_fork enabled terminal 2: # cat perf.pipe | ./perf --no-pager script -i - bash 33349 [034] 149587.674295: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34056 bash 33349 [034] 149588.239521: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34057 terminal 3: # echo enable-sched:sched_wakeup_new > control terminal 1: # mkfifo control ack perf.pipe # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe ... event sched:sched_wakeup_new enabled terminal 2: # cat perf.pipe | ./perf --no-pager script -i - ... bash 33349 [034] 149632.228023: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34059 bash 33349 [034] 149632.228050: sched:sched_wakeup_new: bash:34059 [120] success=1 CPU:036 bash 33349 [034] 149633.950005: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34060 bash 33349 [034] 149633.950030: sched:sched_wakeup_new: bash:34060 [120] success=1 CPU:036 Signed-off-by: Jiri Olsa <jolsa@kernel.org> --- tools/perf/builtin-record.c | 2 ++ tools/perf/builtin-stat.c | 2 ++ tools/perf/util/evlist.c | 30 +++++++++++++++++++++++++++++- tools/perf/util/evlist.h | 4 ++++ 4 files changed, 37 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index d832c108a1ca..582b8fba012c 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -1949,6 +1949,8 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) break; case EVLIST_CTL_CMD_ACK: case EVLIST_CTL_CMD_UNSUPPORTED: + case EVLIST_CTL_CMD_ENABLE_EVSEL: + case EVLIST_CTL_CMD_DISABLE_EVSEL: default: break; } diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 89c32692f40c..6a21fb665008 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -590,6 +590,8 @@ static void process_evlist(struct evlist *evlist, unsigned int interval) case EVLIST_CTL_CMD_SNAPSHOT: case EVLIST_CTL_CMD_ACK: case EVLIST_CTL_CMD_UNSUPPORTED: + case EVLIST_CTL_CMD_ENABLE_EVSEL: + case EVLIST_CTL_CMD_DISABLE_EVSEL: default: break; } diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index 70aff26612a9..05723227bebf 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -1915,7 +1915,13 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, bytes_read == data_size ? "" : c == '\n' ? "\\n" : "\\0"); if (bytes_read > 0) { - if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, + if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_EVSEL_TAG, + (sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG)-1))) { + *cmd = EVLIST_CTL_CMD_ENABLE_EVSEL; + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_EVSEL_TAG, + (sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG)-1))) { + *cmd = EVLIST_CTL_CMD_DISABLE_EVSEL; + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, (sizeof(EVLIST_CTL_CMD_ENABLE_TAG)-1))) { *cmd = EVLIST_CTL_CMD_ENABLE; } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_TAG, @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; int ctlfd_pos = evlist->ctl_fd.pos; struct pollfd *entries = evlist->core.pollfd.entries; + struct evsel *evsel; + char *evsel_name; if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) return 0; @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) case EVLIST_CTL_CMD_DISABLE: evlist__disable(evlist); break; + case EVLIST_CTL_CMD_ENABLE_EVSEL: + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; + evsel = evlist__find_evsel_by_str(evlist, evsel_name); + if (evsel) { + evlist__enable_evsel(evlist, evsel_name); + pr_info("event %s enabled\n", evsel->name); + } else { + pr_info("failed: can't find %s event\n", evsel_name); + } + break; + case EVLIST_CTL_CMD_DISABLE_EVSEL: + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG) - 1; + evsel = evlist__find_evsel_by_str(evlist, evsel_name); + if (evsel) { + evlist__disable_evsel(evlist, evsel_name); + pr_info("event %s disabled\n", evsel->name); + } else { + pr_info("failed: can't find %s event\n", evsel_name); + } + break; case EVLIST_CTL_CMD_SNAPSHOT: break; case EVLIST_CTL_CMD_ACK: diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index 1aae75895dea..e4e8ff8831a3 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -330,6 +330,8 @@ struct evsel *evlist__reset_weak_group(struct evlist *evlist, struct evsel *evse #define EVLIST_CTL_CMD_DISABLE_TAG "disable" #define EVLIST_CTL_CMD_ACK_TAG "ack\n" #define EVLIST_CTL_CMD_SNAPSHOT_TAG "snapshot" +#define EVLIST_CTL_CMD_ENABLE_EVSEL_TAG "enable-" +#define EVLIST_CTL_CMD_DISABLE_EVSEL_TAG "disable-" #define EVLIST_CTL_CMD_MAX_LEN 64 @@ -337,6 +339,8 @@ enum evlist_ctl_cmd { EVLIST_CTL_CMD_UNSUPPORTED = 0, EVLIST_CTL_CMD_ENABLE, EVLIST_CTL_CMD_DISABLE, + EVLIST_CTL_CMD_ENABLE_EVSEL, + EVLIST_CTL_CMD_DISABLE_EVSEL, EVLIST_CTL_CMD_ACK, EVLIST_CTL_CMD_SNAPSHOT, }; -- 2.26.2 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-06 17:05 ` [PATCH 2/3] perf tools: Allow to enable/disable events via control file Jiri Olsa @ 2020-12-07 17:02 ` Alexei Budankov 2020-12-10 16:24 ` Jiri Olsa 0 siblings, 1 reply; 25+ messages in thread From: Alexei Budankov @ 2020-12-07 17:02 UTC (permalink / raw) To: Jiri Olsa, Arnaldo Carvalho de Melo Cc: lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Hi, On 06.12.2020 20:05, Jiri Olsa wrote: > Adding new control events to enable/disable specific event. > The interface string for control file are: > > 'enable-<EVENT NAME>' > 'disable-<EVENT NAME>' <SNIP> > > when received the command, perf will scan the current evlist > for <EVENT NAME> and if found it's enabled/disabled. <SNIP> > diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c > index 70aff26612a9..05723227bebf 100644 > --- a/tools/perf/util/evlist.c > +++ b/tools/perf/util/evlist.c > @@ -1915,7 +1915,13 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, > bytes_read == data_size ? "" : c == '\n' ? "\\n" : "\\0"); > > if (bytes_read > 0) { > - if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > + if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_EVSEL_TAG, > + (sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG)-1))) { > + *cmd = EVLIST_CTL_CMD_ENABLE_EVSEL; > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_EVSEL_TAG, > + (sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG)-1))) { > + *cmd = EVLIST_CTL_CMD_DISABLE_EVSEL; > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > (sizeof(EVLIST_CTL_CMD_ENABLE_TAG)-1))) { > *cmd = EVLIST_CTL_CMD_ENABLE; > } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_TAG, > @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; > int ctlfd_pos = evlist->ctl_fd.pos; > struct pollfd *entries = evlist->core.pollfd.entries; > + struct evsel *evsel; > + char *evsel_name; > > if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) > return 0; > @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > case EVLIST_CTL_CMD_DISABLE: > evlist__disable(evlist); > break; > + case EVLIST_CTL_CMD_ENABLE_EVSEL: > + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; It makes sense to check that evsel_name still points into cmd_data buffer after assigning to event name. Regards, Alexei ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-07 17:02 ` Alexei Budankov @ 2020-12-10 16:24 ` Jiri Olsa 2020-12-10 17:15 ` Arnaldo Carvalho de Melo 2020-12-10 18:06 ` Jiri Olsa 0 siblings, 2 replies; 25+ messages in thread From: Jiri Olsa @ 2020-12-10 16:24 UTC (permalink / raw) To: Alexei Budankov Cc: Jiri Olsa, Arnaldo Carvalho de Melo, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian On Mon, Dec 07, 2020 at 08:02:20PM +0300, Alexei Budankov wrote: > Hi, > > On 06.12.2020 20:05, Jiri Olsa wrote: > > Adding new control events to enable/disable specific event. > > The interface string for control file are: > > > > 'enable-<EVENT NAME>' > > 'disable-<EVENT NAME>' > > <SNIP> > > > > > when received the command, perf will scan the current evlist > > for <EVENT NAME> and if found it's enabled/disabled. > > <SNIP> > > > diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c > > index 70aff26612a9..05723227bebf 100644 > > --- a/tools/perf/util/evlist.c > > +++ b/tools/perf/util/evlist.c > > @@ -1915,7 +1915,13 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, > > bytes_read == data_size ? "" : c == '\n' ? "\\n" : "\\0"); > > > > if (bytes_read > 0) { > > - if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > > + if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_EVSEL_TAG, > > + (sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG)-1))) { > > + *cmd = EVLIST_CTL_CMD_ENABLE_EVSEL; > > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_EVSEL_TAG, > > + (sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG)-1))) { > > + *cmd = EVLIST_CTL_CMD_DISABLE_EVSEL; > > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > > (sizeof(EVLIST_CTL_CMD_ENABLE_TAG)-1))) { > > *cmd = EVLIST_CTL_CMD_ENABLE; > > } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_TAG, > > @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; > > int ctlfd_pos = evlist->ctl_fd.pos; > > struct pollfd *entries = evlist->core.pollfd.entries; > > + struct evsel *evsel; > > + char *evsel_name; > > > > if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) > > return 0; > > @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > case EVLIST_CTL_CMD_DISABLE: > > evlist__disable(evlist); > > break; > > + case EVLIST_CTL_CMD_ENABLE_EVSEL: > > + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; > > It makes sense to check that evsel_name still points > into cmd_data buffer after assigning to event name. right, will add that thanks, jirka ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 16:24 ` Jiri Olsa @ 2020-12-10 17:15 ` Arnaldo Carvalho de Melo 2020-12-10 17:19 ` Arnaldo Carvalho de Melo 2020-12-10 18:06 ` Jiri Olsa 1 sibling, 1 reply; 25+ messages in thread From: Arnaldo Carvalho de Melo @ 2020-12-10 17:15 UTC (permalink / raw) To: Jiri Olsa Cc: Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Em Thu, Dec 10, 2020 at 05:24:30PM +0100, Jiri Olsa escreveu: > On Mon, Dec 07, 2020 at 08:02:20PM +0300, Alexei Budankov wrote: > > Hi, > > > > On 06.12.2020 20:05, Jiri Olsa wrote: > > > Adding new control events to enable/disable specific event. > > > The interface string for control file are: > > > > > > 'enable-<EVENT NAME>' > > > 'disable-<EVENT NAME>' > > > > <SNIP> > > > > > > > > when received the command, perf will scan the current evlist > > > for <EVENT NAME> and if found it's enabled/disabled. > > > > <SNIP> > > > > > diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c > > > index 70aff26612a9..05723227bebf 100644 > > > --- a/tools/perf/util/evlist.c > > > +++ b/tools/perf/util/evlist.c > > > @@ -1915,7 +1915,13 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, > > > bytes_read == data_size ? "" : c == '\n' ? "\\n" : "\\0"); > > > > > > if (bytes_read > 0) { > > > - if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > > > + if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_EVSEL_TAG, > > > + (sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG)-1))) { > > > + *cmd = EVLIST_CTL_CMD_ENABLE_EVSEL; > > > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_EVSEL_TAG, > > > + (sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG)-1))) { > > > + *cmd = EVLIST_CTL_CMD_DISABLE_EVSEL; > > > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > > > (sizeof(EVLIST_CTL_CMD_ENABLE_TAG)-1))) { > > > *cmd = EVLIST_CTL_CMD_ENABLE; > > > } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_TAG, > > > @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > > char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; > > > int ctlfd_pos = evlist->ctl_fd.pos; > > > struct pollfd *entries = evlist->core.pollfd.entries; > > > + struct evsel *evsel; > > > + char *evsel_name; > > > > > > if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) > > > return 0; > > > @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > > case EVLIST_CTL_CMD_DISABLE: > > > evlist__disable(evlist); > > > break; > > > + case EVLIST_CTL_CMD_ENABLE_EVSEL: > > > + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; > > > > It makes sense to check that evsel_name still points > > into cmd_data buffer after assigning to event name. > > right, will add that So, I'm finishing test builds, so probably I'll push the first two patches publicly and then you can send a patch on top of this, ok? Unless the tests break somewhere and then I'll have to restart, so I'll fold in whatever gets at that time... - Arnaldo ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 17:15 ` Arnaldo Carvalho de Melo @ 2020-12-10 17:19 ` Arnaldo Carvalho de Melo 2020-12-10 17:26 ` [BUG] jevents problem when cross building " Arnaldo Carvalho de Melo 0 siblings, 1 reply; 25+ messages in thread From: Arnaldo Carvalho de Melo @ 2020-12-10 17:19 UTC (permalink / raw) To: Jiri Olsa, John Garry Cc: Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Em Thu, Dec 10, 2020 at 02:15:03PM -0300, Arnaldo Carvalho de Melo escreveu: > Em Thu, Dec 10, 2020 at 05:24:30PM +0100, Jiri Olsa escreveu: > > On Mon, Dec 07, 2020 at 08:02:20PM +0300, Alexei Budankov wrote: > > > On 06.12.2020 20:05, Jiri Olsa wrote: > > > > @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > > > char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; > > > > int ctlfd_pos = evlist->ctl_fd.pos; > > > > struct pollfd *entries = evlist->core.pollfd.entries; > > > > + struct evsel *evsel; > > > > + char *evsel_name; > > > > > > > > if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) > > > > return 0; > > > > @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > > > case EVLIST_CTL_CMD_DISABLE: > > > > evlist__disable(evlist); > > > > break; > > > > + case EVLIST_CTL_CMD_ENABLE_EVSEL: > > > > + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; > > > It makes sense to check that evsel_name still points > > > into cmd_data buffer after assigning to event name. > > right, will add that > So, I'm finishing test builds, so probably I'll push the first two > patches publicly and then you can send a patch on top of this, ok? > Unless the tests break somewhere and then I'll have to restart, so I'll > fold in whatever gets at that time... That was quick: [perfbuilder@five ~]$ time dm Thu Dec 10 01:44:52 PM -03 2020 # export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0-rc6.tar.xz # dm 1 78.47 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final) 2 104.38 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final) 3 105.64 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final) 4 96.52 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0) 5 81.08 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1) 6 85.20 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1) 7 106.10 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0) 8 120.20 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0) 9 109.99 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c) 10 117.76 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1 11 69.15 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final) 12 84.55 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0 13 82.69 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1 14 66.22 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final) 15 100.16 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2) 16 11.20 android-ndk:r12b-arm : FAIL arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) 17 11.90 android-ndk:r15c-arm : FAIL arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) 18 26.33 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23) 19 31.80 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44) 20 116.02 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03) 21 62.27 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201106 releases/gcc-10.2.0-475-g099857318c, clang version 10.0.1 22 77.82 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) 23: debian:9 There I go... [perfbuilder@five ~]$ tail -20 dm.log/android-ndk\:r12b-arm FLEX /tmp/build/perf/util/expr-flex.c CC /tmp/build/perf/util/pmu-bison.o CC /tmp/build/perf/util/expr-bison.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/expr.o CC /tmp/build/perf/util/parse-events.o CC /tmp/build/perf/util/parse-events-flex.o CC /tmp/build/perf/util/pmu.o CC /tmp/build/perf/util/pmu-flex.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /tmp/build/perf/perf-in.o:hist.c:function pmu_for_each_sys_event: error: undefined reference to 'pmu_sys_event_tables' collect2: error: ld returned 1 exit status make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 make[1]: *** [Makefile.perf:233: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~] Now to figure out who generates this pmu_sys_event_tables, John? - Arnaldo ^ permalink raw reply [flat|nested] 25+ messages in thread
* [BUG] jevents problem when cross building Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 17:19 ` Arnaldo Carvalho de Melo @ 2020-12-10 17:26 ` Arnaldo Carvalho de Melo 2020-12-10 17:44 ` John Garry 0 siblings, 1 reply; 25+ messages in thread From: Arnaldo Carvalho de Melo @ 2020-12-10 17:26 UTC (permalink / raw) To: John Garry Cc: Jiri Olsa, Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Em Thu, Dec 10, 2020 at 02:19:03PM -0300, Arnaldo Carvalho de Melo escreveu: > Em Thu, Dec 10, 2020 at 02:15:03PM -0300, Arnaldo Carvalho de Melo escreveu: > > Em Thu, Dec 10, 2020 at 05:24:30PM +0100, Jiri Olsa escreveu: > > > On Mon, Dec 07, 2020 at 08:02:20PM +0300, Alexei Budankov wrote: > > > > On 06.12.2020 20:05, Jiri Olsa wrote: > > > > > @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > > > > char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; > > > > > int ctlfd_pos = evlist->ctl_fd.pos; > > > > > struct pollfd *entries = evlist->core.pollfd.entries; > > > > > + struct evsel *evsel; > > > > > + char *evsel_name; > > > > > if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) > > > > > return 0; > > > > > @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > > > > case EVLIST_CTL_CMD_DISABLE: > > > > > evlist__disable(evlist); > > > > > break; > > > > > + case EVLIST_CTL_CMD_ENABLE_EVSEL: > > > > > + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; > > > > > It makes sense to check that evsel_name still points > > > > into cmd_data buffer after assigning to event name. > > > right, will add that > > So, I'm finishing test builds, so probably I'll push the first two > > patches publicly and then you can send a patch on top of this, ok? > > Unless the tests break somewhere and then I'll have to restart, so I'll > > fold in whatever gets at that time... > That was quick: > [perfbuilder@five ~]$ time dm > Thu Dec 10 01:44:52 PM -03 2020 > # export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0-rc6.tar.xz > # dm > 1 78.47 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final) > 2 104.38 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final) > 3 105.64 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final) > 4 96.52 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0) > 5 81.08 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1) > 6 85.20 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1) > 7 106.10 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0) > 8 120.20 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0) > 9 109.99 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c) > 10 117.76 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1 > 11 69.15 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final) > 12 84.55 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0 > 13 82.69 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1 > 14 66.22 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final) > 15 100.16 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2) > 16 11.20 android-ndk:r12b-arm : FAIL arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) > 17 11.90 android-ndk:r15c-arm : FAIL arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) > 18 26.33 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23) > 19 31.80 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44) > 20 116.02 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03) > 21 62.27 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201106 releases/gcc-10.2.0-475-g099857318c, clang version 10.0.1 > 22 77.82 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) > 23: debian:9 > > > There I go... > > [perfbuilder@five ~]$ tail -20 dm.log/android-ndk\:r12b-arm > FLEX /tmp/build/perf/util/expr-flex.c > CC /tmp/build/perf/util/pmu-bison.o > CC /tmp/build/perf/util/expr-bison.o > CC /tmp/build/perf/util/expr-flex.o > CC /tmp/build/perf/util/expr.o > CC /tmp/build/perf/util/parse-events.o > CC /tmp/build/perf/util/parse-events-flex.o > CC /tmp/build/perf/util/pmu.o > CC /tmp/build/perf/util/pmu-flex.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /tmp/build/perf/perf-in.o:hist.c:function pmu_for_each_sys_event: error: undefined reference to 'pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 > make[1]: *** [Makefile.perf:233: sub-make] Error 2 > make: *** [Makefile:70: all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~] > > Now to figure out who generates this pmu_sys_event_tables, John? One more: [perfbuilder@five ~]$ tail -20 dm.log/debian\:experimental-x-mips64 CC /tmp/build/perf/util/expr-bison.o CC /tmp/build/perf/util/parse-events.o CC /tmp/build/perf/util/pmu.o CC /tmp/build/perf/util/parse-events-flex.o CC /tmp/build/perf/util/pmu-flex.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/expr.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /usr/lib/gcc-cross/mips64-linux-gnuabi64/9/../../../../mips64-linux-gnuabi64/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' /usr/lib/gcc-cross/mips64-linux-gnuabi64/9/../../../../mips64-linux-gnuabi64/bin/ld: /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 make[1]: *** [Makefile.perf:233: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ And another: [perfbuilder@five ~]$ tail -20 dm.log/fedora:24-x-ARC-uClibc CC /tmp/build/perf/util/expr.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed make[2]: *** [/tmp/build/perf/perf] Error 1 Makefile.perf:232: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ So far all the cross builds failed. - Arnaldo ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [BUG] jevents problem when cross building Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 17:26 ` [BUG] jevents problem when cross building " Arnaldo Carvalho de Melo @ 2020-12-10 17:44 ` John Garry 2020-12-10 18:17 ` Arnaldo Carvalho de Melo 0 siblings, 1 reply; 25+ messages in thread From: John Garry @ 2020-12-10 17:44 UTC (permalink / raw) To: Arnaldo Carvalho de Melo Cc: Jiri Olsa, Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian >>>>>> + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; >> >>>>> It makes sense to check that evsel_name still points >>>>> into cmd_data buffer after assigning to event name. > >>>> right, will add that > >>> So, I'm finishing test builds, so probably I'll push the first two >>> patches publicly and then you can send a patch on top of this, ok? > >>> Unless the tests break somewhere and then I'll have to restart, so I'll >>> fold in whatever gets at that time... > >> That was quick: > >> [perfbuilder@five ~]$ time dm >> Thu Dec 10 01:44:52 PM -03 2020 >> # export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0-rc6.tar.xz >> # dm >> 1 78.47 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final) >> 2 104.38 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final) >> 3 105.64 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final) >> 4 96.52 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0) >> 5 81.08 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1) >> 6 85.20 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1) >> 7 106.10 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0) >> 8 120.20 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0) >> 9 109.99 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c) >> 10 117.76 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1 >> 11 69.15 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final) >> 12 84.55 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0 >> 13 82.69 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1 >> 14 66.22 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final) >> 15 100.16 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2) >> 16 11.20 android-ndk:r12b-arm : FAIL arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) >> 17 11.90 android-ndk:r15c-arm : FAIL arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) >> 18 26.33 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23) >> 19 31.80 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44) >> 20 116.02 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03) >> 21 62.27 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201106 releases/gcc-10.2.0-475-g099857318c, clang version 10.0.1 >> 22 77.82 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) >> 23: debian:9 >> >> >> There I go... >> >> [perfbuilder@five ~]$ tail -20 dm.log/android-ndk\:r12b-arm >> FLEX /tmp/build/perf/util/expr-flex.c >> CC /tmp/build/perf/util/pmu-bison.o >> CC /tmp/build/perf/util/expr-bison.o >> CC /tmp/build/perf/util/expr-flex.o >> CC /tmp/build/perf/util/expr.o >> CC /tmp/build/perf/util/parse-events.o >> CC /tmp/build/perf/util/parse-events-flex.o >> CC /tmp/build/perf/util/pmu.o >> CC /tmp/build/perf/util/pmu-flex.o >> LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o >> LD /tmp/build/perf/util/perf-in.o >> LD /tmp/build/perf/perf-in.o >> LINK /tmp/build/perf/perf >> /tmp/build/perf/perf-in.o:hist.c:function pmu_for_each_sys_event: error: undefined reference to 'pmu_sys_event_tables' >> collect2: error: ld returned 1 exit status >> make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 >> make[1]: *** [Makefile.perf:233: sub-make] Error 2 >> make: *** [Makefile:70: all] Error 2 >> make: Leaving directory '/git/linux/tools/perf' >> + exit 1 >> [perfbuilder@five ~] >> >> Now to figure out who generates this pmu_sys_event_tables, John? > > One more: > > [perfbuilder@five ~]$ tail -20 dm.log/debian\:experimental-x-mips64 > CC /tmp/build/perf/util/expr-bison.o > CC /tmp/build/perf/util/parse-events.o > CC /tmp/build/perf/util/pmu.o > CC /tmp/build/perf/util/parse-events-flex.o > CC /tmp/build/perf/util/pmu-flex.o > CC /tmp/build/perf/util/expr-flex.o > CC /tmp/build/perf/util/expr.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /usr/lib/gcc-cross/mips64-linux-gnuabi64/9/../../../../mips64-linux-gnuabi64/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > /usr/lib/gcc-cross/mips64-linux-gnuabi64/9/../../../../mips64-linux-gnuabi64/bin/ld: /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 > make[1]: *** [Makefile.perf:233: sub-make] Error 2 > make: *** [Makefile:70: all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > And another: > > [perfbuilder@five ~]$ tail -20 dm.log/fedora:24-x-ARC-uClibc > CC /tmp/build/perf/util/expr.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed > make[2]: *** [/tmp/build/perf/perf] Error 1 > Makefile.perf:232: recipe for target 'sub-make' failed > make[1]: *** [sub-make] Error 2 > Makefile:69: recipe for target 'all' failed > make: *** [all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > Hi Arnaldo, I'm not sure what is going on here. So symbol 'pmu_sys_event_tables' is introduced in https://lore.kernel.org/linux-arm-kernel/1607080216-36968-3-git-send-email-john.garry@huawei.com/, but I did not think that you picked any of this series up yet, right? I checked your perf/core branch, and no sign, so which git/branch is this? Thanks, John > So far all the cross builds failed. > > - Arnaldo > . > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [BUG] jevents problem when cross building Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 17:44 ` John Garry @ 2020-12-10 18:17 ` Arnaldo Carvalho de Melo 2020-12-10 18:27 ` John Garry 0 siblings, 1 reply; 25+ messages in thread From: Arnaldo Carvalho de Melo @ 2020-12-10 18:17 UTC (permalink / raw) To: John Garry Cc: Jiri Olsa, Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Em Thu, Dec 10, 2020 at 05:44:51PM +0000, John Garry escreveu: > > > > > > > > + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; > > > > > > > > > It makes sense to check that evsel_name still points > > > > > > into cmd_data buffer after assigning to event name. > > > > > right, will add that > > > > So, I'm finishing test builds, so probably I'll push the first two > > > > patches publicly and then you can send a patch on top of this, ok? > > > > Unless the tests break somewhere and then I'll have to restart, so I'll > > > > fold in whatever gets at that time... > > > That was quick: > > > [perfbuilder@five ~]$ time dm > > > Thu Dec 10 01:44:52 PM -03 2020 > > > # export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0-rc6.tar.xz > > > # dm > > > 1 78.47 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final) > > > 2 104.38 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final) > > > 3 105.64 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final) > > > 4 96.52 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0) > > > 5 81.08 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1) > > > 6 85.20 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1) > > > 7 106.10 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0) > > > 8 120.20 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0) > > > 9 109.99 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c) > > > 10 117.76 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1 > > > 11 69.15 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final) > > > 12 84.55 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0 > > > 13 82.69 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1 > > > 14 66.22 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final) > > > 15 100.16 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-9), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2) > > > 16 11.20 android-ndk:r12b-arm : FAIL arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) > > > 17 11.90 android-ndk:r15c-arm : FAIL arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease) > > > 18 26.33 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23) > > > 19 31.80 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44) > > > 20 116.02 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03) > > > 21 62.27 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201106 releases/gcc-10.2.0-475-g099857318c, clang version 10.0.1 > > > 22 77.82 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0) > > > 23: debian:9 > > > > > > > > > There I go... > > > > > > [perfbuilder@five ~]$ tail -20 dm.log/android-ndk\:r12b-arm > > > FLEX /tmp/build/perf/util/expr-flex.c > > > CC /tmp/build/perf/util/pmu-bison.o > > > CC /tmp/build/perf/util/expr-bison.o > > > CC /tmp/build/perf/util/expr-flex.o > > > CC /tmp/build/perf/util/expr.o > > > CC /tmp/build/perf/util/parse-events.o > > > CC /tmp/build/perf/util/parse-events-flex.o > > > CC /tmp/build/perf/util/pmu.o > > > CC /tmp/build/perf/util/pmu-flex.o > > > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > > > LD /tmp/build/perf/util/perf-in.o > > > LD /tmp/build/perf/perf-in.o > > > LINK /tmp/build/perf/perf > > > /tmp/build/perf/perf-in.o:hist.c:function pmu_for_each_sys_event: error: undefined reference to 'pmu_sys_event_tables' > > > collect2: error: ld returned 1 exit status > > > make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 > > > make[1]: *** [Makefile.perf:233: sub-make] Error 2 > > > make: *** [Makefile:70: all] Error 2 > > > make: Leaving directory '/git/linux/tools/perf' > > > + exit 1 > > > [perfbuilder@five ~] > > > > > > Now to figure out who generates this pmu_sys_event_tables, John? > > > > One more: > > > > [perfbuilder@five ~]$ tail -20 dm.log/debian\:experimental-x-mips64 > > CC /tmp/build/perf/util/expr-bison.o > > CC /tmp/build/perf/util/parse-events.o > > CC /tmp/build/perf/util/pmu.o > > CC /tmp/build/perf/util/parse-events-flex.o > > CC /tmp/build/perf/util/pmu-flex.o > > CC /tmp/build/perf/util/expr-flex.o > > CC /tmp/build/perf/util/expr.o > > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > > LD /tmp/build/perf/util/perf-in.o > > LD /tmp/build/perf/perf-in.o > > LINK /tmp/build/perf/perf > > /usr/lib/gcc-cross/mips64-linux-gnuabi64/9/../../../../mips64-linux-gnuabi64/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': > > /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > > /usr/lib/gcc-cross/mips64-linux-gnuabi64/9/../../../../mips64-linux-gnuabi64/bin/ld: /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > > collect2: error: ld returned 1 exit status > > make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 > > make[1]: *** [Makefile.perf:233: sub-make] Error 2 > > make: *** [Makefile:70: all] Error 2 > > make: Leaving directory '/git/linux/tools/perf' > > + exit 1 > > [perfbuilder@five ~]$ > > > > And another: > > > > [perfbuilder@five ~]$ tail -20 dm.log/fedora:24-x-ARC-uClibc > > CC /tmp/build/perf/util/expr.o > > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > > LD /tmp/build/perf/util/perf-in.o > > LD /tmp/build/perf/perf-in.o > > LINK /tmp/build/perf/perf > > /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': > > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > > /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': > > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > > collect2: error: ld returned 1 exit status > > Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed > > make[2]: *** [/tmp/build/perf/perf] Error 1 > > Makefile.perf:232: recipe for target 'sub-make' failed > > make[1]: *** [sub-make] Error 2 > > Makefile:69: recipe for target 'all' failed > > make: *** [all] Error 2 > > make: Leaving directory '/git/linux/tools/perf' > > + exit 1 > > [perfbuilder@five ~]$ > > > > Hi Arnaldo, > > I'm not sure what is going on here. > > So symbol 'pmu_sys_event_tables' is introduced in https://lore.kernel.org/linux-arm-kernel/1607080216-36968-3-git-send-email-john.garry@huawei.com/, > but I did not think that you picked any of this series up yet, right? > > I checked your perf/core branch, and no sign, so which git/branch is this? Its unpublished, I'll send it to the tmp.perf/core branch now. More results from testing: 59 13.57 ubuntu:16.04-x-arm : FAIL arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:16.04-x-arm CC /tmp/build/perf/util/expr.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed make[2]: *** [/tmp/build/perf/perf] Error 1 Makefile.perf:232: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ 60 26.91 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 61 25.62 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 62 26.39 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 63 25.92 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 64 25.96 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 65 89.87 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final) 66 14.45 ubuntu:18.04-x-arm : FAIL arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0 [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-arm CC /tmp/build/perf/util/pmu-flex.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/expr.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:840: undefined reference to `pmu_sys_event_tables' /tmp/build/perf/perf-in.o: In function `perf_pmu__find': /git/linux/tools/perf/util/pmu.c:1031: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed make[2]: *** [/tmp/build/perf/perf] Error 1 Makefile.perf:232: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ 67 27.63 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0 68 12.06 ubuntu:18.04-x-m68k : FAIL m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-m68k CC /tmp/build/perf/util/pmu-flex.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/expr.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed make[2]: *** [/tmp/build/perf/perf] Error 1 Makefile.perf:232: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ 69 27.21 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 70 29.40 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 71 29.56 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 72 63.55 ubuntu:18.04-x-riscv64 : FAIL riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-riscv64 CC /tmp/build/perf/util/parse-events-flex.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /tmp/build/perf/perf-in.o: In function `replace_android_lib': /git/linux/tools/perf/util/map.c:45: undefined reference to `pmu_sys_event_tables' /git/linux/tools/perf/util/map.c:47: undefined reference to `pmu_sys_event_tables' /tmp/build/perf/perf-in.o: In function `snprintf': /usr/riscv64-linux-gnu/include/bits/stdio2.h:64: undefined reference to `pmu_sys_event_tables' /usr/riscv64-linux-gnu/include/bits/stdio2.h:64: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed make[2]: *** [/tmp/build/perf/perf] Error 1 Makefile.perf:232: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ 73 24.68 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 74 13.29 ubuntu:18.04-x-sh4 : FAIL sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-sh4 CC /tmp/build/perf/util/pmu-flex.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/expr.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:840: undefined reference to `pmu_sys_event_tables' /tmp/build/perf/perf-in.o: In function `perf_pmu__find': /git/linux/tools/perf/util/pmu.c:1031: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed make[2]: *** [/tmp/build/perf/perf] Error 1 Makefile.perf:232: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ 75 12.49 ubuntu:18.04-x-sparc64 : FAIL sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-sparc64 LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' /tmp/build/perf/perf-in.o: In function `pmu_uncore_alias_match': /git/linux/tools/perf/util/pmu.c:732: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed make[2]: *** [/tmp/build/perf/perf] Error 1 Makefile.perf:232: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ 76 69.65 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final) 77 13.58 ubuntu:19.10-x-alpha : FAIL alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008 [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:19.10-x-alpha CC /tmp/build/perf/util/expr-bison.o CC /tmp/build/perf/util/parse-events.o CC /tmp/build/perf/util/parse-events-flex.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/expr.o CC /tmp/build/perf/util/pmu.o CC /tmp/build/perf/util/pmu-flex.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /usr/lib/gcc-cross/alpha-linux-gnu/9/../../../../alpha-linux-gnu/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' /usr/lib/gcc-cross/alpha-linux-gnu/9/../../../../alpha-linux-gnu/bin/ld: /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 make[1]: *** [Makefile.perf:233: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ 78 12.64 ubuntu:19.10-x-hppa : FAIL hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008 [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:19.10-x-hppa CC /tmp/build/perf/util/pmu.o CC /tmp/build/perf/util/pmu-flex.o CC /tmp/build/perf/util/expr-flex.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf /usr/lib/gcc-cross/hppa-linux-gnu/9/../../../../hppa-linux-gnu/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' /usr/lib/gcc-cross/hppa-linux-gnu/9/../../../../hppa-linux-gnu/bin/ld: /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' /usr/lib/gcc-cross/hppa-linux-gnu/9/../../../../hppa-linux-gnu/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_add_sys_aliases': /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' /usr/lib/gcc-cross/hppa-linux-gnu/9/../../../../hppa-linux-gnu/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' collect2: error: ld returned 1 exit status make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 make[1]: *** [Makefile.perf:233: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/git/linux/tools/perf' + exit 1 [perfbuilder@five ~]$ 79 75.25 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1 80 31.39 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0 81 75.09 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2 ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [BUG] jevents problem when cross building Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 18:17 ` Arnaldo Carvalho de Melo @ 2020-12-10 18:27 ` John Garry 2020-12-10 19:57 ` John Garry 0 siblings, 1 reply; 25+ messages in thread From: John Garry @ 2020-12-10 18:27 UTC (permalink / raw) To: Arnaldo Carvalho de Melo Cc: Jiri Olsa, Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian On 10/12/2020 18:17, Arnaldo Carvalho de Melo wrote: >> So symbol 'pmu_sys_event_tables' is introduced inhttps://lore.kernel.org/linux-arm-kernel/1607080216-36968-3-git-send-email-john.garry@huawei.com/, >> but I did not think that you picked any of this series up yet, right? >> >> I checked your perf/core branch, and no sign, so which git/branch is this? > Its unpublished, I'll send it to the tmp.perf/core branch now. I use cross-compile for arm64 to build, and it's ok. I notice that the failures are for architectures which don't have an entry under pmu-events/arch, so maybe we're missing some 'weak' definition of pmu_sys_event_tables. I'll check now. John > > More results from testing: > > 59 13.57 ubuntu:16.04-x-arm : FAIL arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 > > [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:16.04-x-arm > CC /tmp/build/perf/util/expr.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed > make[2]: *** [/tmp/build/perf/perf] Error 1 > Makefile.perf:232: recipe for target 'sub-make' failed > make[1]: *** [sub-make] Error 2 > Makefile:69: recipe for target 'all' failed > make: *** [all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > 60 26.91 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 > 61 25.62 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 > 62 26.39 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 > 63 25.92 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 > 64 25.96 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609 > 65 89.87 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final) > 66 14.45 ubuntu:18.04-x-arm : FAIL arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0 > > [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-arm > CC /tmp/build/perf/util/pmu-flex.o > CC /tmp/build/perf/util/expr-flex.o > CC /tmp/build/perf/util/expr.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:840: undefined reference to `pmu_sys_event_tables' > /tmp/build/perf/perf-in.o: In function `perf_pmu__find': > /git/linux/tools/perf/util/pmu.c:1031: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed > make[2]: *** [/tmp/build/perf/perf] Error 1 > Makefile.perf:232: recipe for target 'sub-make' failed > make[1]: *** [sub-make] Error 2 > Makefile:69: recipe for target 'all' failed > make: *** [all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > 67 27.63 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0 > 68 12.06 ubuntu:18.04-x-m68k : FAIL m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 > > [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-m68k > CC /tmp/build/perf/util/pmu-flex.o > CC /tmp/build/perf/util/expr-flex.o > CC /tmp/build/perf/util/expr.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed > make[2]: *** [/tmp/build/perf/perf] Error 1 > Makefile.perf:232: recipe for target 'sub-make' failed > make[1]: *** [sub-make] Error 2 > Makefile:69: recipe for target 'all' failed > make: *** [all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > 69 27.21 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 > 70 29.40 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 > 71 29.56 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 > 72 63.55 ubuntu:18.04-x-riscv64 : FAIL riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 > > [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-riscv64 > CC /tmp/build/perf/util/parse-events-flex.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /tmp/build/perf/perf-in.o: In function `replace_android_lib': > /git/linux/tools/perf/util/map.c:45: undefined reference to `pmu_sys_event_tables' > /git/linux/tools/perf/util/map.c:47: undefined reference to `pmu_sys_event_tables' > /tmp/build/perf/perf-in.o: In function `snprintf': > /usr/riscv64-linux-gnu/include/bits/stdio2.h:64: undefined reference to `pmu_sys_event_tables' > /usr/riscv64-linux-gnu/include/bits/stdio2.h:64: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed > make[2]: *** [/tmp/build/perf/perf] Error 1 > Makefile.perf:232: recipe for target 'sub-make' failed > make[1]: *** [sub-make] Error 2 > Makefile:69: recipe for target 'all' failed > make: *** [all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > 73 24.68 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 > 74 13.29 ubuntu:18.04-x-sh4 : FAIL sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 > > [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-sh4 > CC /tmp/build/perf/util/pmu-flex.o > CC /tmp/build/perf/util/expr-flex.o > CC /tmp/build/perf/util/expr.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:840: undefined reference to `pmu_sys_event_tables' > /tmp/build/perf/perf-in.o: In function `perf_pmu__find': > /git/linux/tools/perf/util/pmu.c:1031: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed > make[2]: *** [/tmp/build/perf/perf] Error 1 > Makefile.perf:232: recipe for target 'sub-make' failed > make[1]: *** [sub-make] Error 2 > Makefile:69: recipe for target 'all' failed > make: *** [all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > 75 12.49 ubuntu:18.04-x-sparc64 : FAIL sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 > > [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:18.04-x-sparc64 > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > /git/linux/tools/perf/util/pmu.c:816: undefined reference to `pmu_sys_event_tables' > /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > /tmp/build/perf/perf-in.o: In function `pmu_uncore_alias_match': > /git/linux/tools/perf/util/pmu.c:732: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed > make[2]: *** [/tmp/build/perf/perf] Error 1 > Makefile.perf:232: recipe for target 'sub-make' failed > make[1]: *** [sub-make] Error 2 > Makefile:69: recipe for target 'all' failed > make: *** [all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > 76 69.65 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final) > 77 13.58 ubuntu:19.10-x-alpha : FAIL alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008 > > [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:19.10-x-alpha > CC /tmp/build/perf/util/expr-bison.o > CC /tmp/build/perf/util/parse-events.o > CC /tmp/build/perf/util/parse-events-flex.o > CC /tmp/build/perf/util/expr-flex.o > CC /tmp/build/perf/util/expr.o > CC /tmp/build/perf/util/pmu.o > CC /tmp/build/perf/util/pmu-flex.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /usr/lib/gcc-cross/alpha-linux-gnu/9/../../../../alpha-linux-gnu/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > /usr/lib/gcc-cross/alpha-linux-gnu/9/../../../../alpha-linux-gnu/bin/ld: /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 > make[1]: *** [Makefile.perf:233: sub-make] Error 2 > make: *** [Makefile:70: all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > 78 12.64 ubuntu:19.10-x-hppa : FAIL hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008 > > [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:19.10-x-hppa > CC /tmp/build/perf/util/pmu.o > CC /tmp/build/perf/util/pmu-flex.o > CC /tmp/build/perf/util/expr-flex.o > LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o > LD /tmp/build/perf/util/perf-in.o > LD /tmp/build/perf/perf-in.o > LINK /tmp/build/perf/perf > /usr/lib/gcc-cross/hppa-linux-gnu/9/../../../../hppa-linux-gnu/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > /usr/lib/gcc-cross/hppa-linux-gnu/9/../../../../hppa-linux-gnu/bin/ld: /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > /usr/lib/gcc-cross/hppa-linux-gnu/9/../../../../hppa-linux-gnu/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_add_sys_aliases': > /git/linux/tools/perf/util/pmu.c:886: undefined reference to `pmu_sys_event_tables' > /usr/lib/gcc-cross/hppa-linux-gnu/9/../../../../hppa-linux-gnu/bin/ld: /tmp/build/perf/perf-in.o: in function `pmu_for_each_sys_event': > /git/linux/tools/perf/util/pmu.c:825: undefined reference to `pmu_sys_event_tables' > collect2: error: ld returned 1 exit status > make[2]: *** [Makefile.perf:659: /tmp/build/perf/perf] Error 1 > make[1]: *** [Makefile.perf:233: sub-make] Error 2 > make: *** [Makefile:70: all] Error 2 > make: Leaving directory '/git/linux/tools/perf' > + exit 1 > [perfbuilder@five ~]$ > > 79 75.25 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1 > 80 31.39 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0 > 81 75.09 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2 > . ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [BUG] jevents problem when cross building Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 18:27 ` John Garry @ 2020-12-10 19:57 ` John Garry 2020-12-16 11:41 ` John Garry 0 siblings, 1 reply; 25+ messages in thread From: John Garry @ 2020-12-10 19:57 UTC (permalink / raw) To: Arnaldo Carvalho de Melo Cc: Jiri Olsa, Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian [-- Attachment #1: Type: text/plain, Size: 4120 bytes --] On 10/12/2020 18:27, John Garry wrote: >> Its unpublished, I'll send it to the tmp.perf/core branch now. > > I use cross-compile for arm64 to build, and it's ok. > > I notice that the failures are for architectures which don't have an > entry under pmu-events/arch, so maybe we're missing some 'weak' > definition of pmu_sys_event_tables. > > I'll check now. > Hi Arnaldo, Can you try this on top: ----8<----- From 201aa2cb7bc8723765afd84a5d3972248af0f0a1 Mon Sep 17 00:00:00 2001 From: John Garry <john.garry@huawei.com> Date: Thu, 10 Dec 2020 19:45:14 +0000 Subject: [PATCH] perf jevents: Add system events table for empty mapping For architectures which have no PMU event lists - like arm32 - an empty mapping table is printed. This is how the "pmu_events_map" symbol - referenced in util/pmu.c::perf_pmu__find_map() - is created for those architectures. Since pmu-events.c now includes a new table - "pmu_sys_event_tables" - which is also referenced from util/pmu.c, also add this for the empty mappings. Signed-off-by: John Garry <john.garry@huawei.com> diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c index e930096ad713..28e20d9ec0f5 100644 --- a/tools/perf/pmu-events/jevents.c +++ b/tools/perf/pmu-events/jevents.c @@ -816,19 +816,30 @@ static void print_mapping_test_table(FILE *outfp) fprintf(outfp, "},\n"); } +static void print_system_event_mapping_table_prefix(FILE *outfp) +{ + fprintf(outfp, "\nstruct pmu_sys_events pmu_sys_event_tables[] = {"); +} + +static void print_system_event_mapping_table_suffix(FILE *outfp) +{ + fprintf(outfp, "\n\t{\n\t\t.table = 0\n\t},"); + + fprintf(outfp, "\n};\n"); +} + static int process_system_event_tables(FILE *outfp) { struct sys_event_table *sys_event_table; - fprintf(outfp, "\nstruct pmu_sys_events pmu_sys_event_tables[] = {"); + print_system_event_mapping_table_prefix(outfp); list_for_each_entry(sys_event_table, &sys_event_tables, list) { fprintf(outfp, "\n\t{\n\t\t.table = %s,\n\t},", sys_event_table->soc_id); } - fprintf(outfp, "\n\t{\n\t\t.table = 0\n\t},"); - fprintf(outfp, "\n};\n"); + print_system_event_mapping_table_suffix(outfp); return 0; } @@ -938,6 +949,9 @@ static void create_empty_mapping(const char *output_file) fprintf(outfp, "#include \"pmu-events/pmu-events.h\"\n"); print_mapping_table_prefix(outfp); print_mapping_table_suffix(outfp); + print_system_event_mapping_table_prefix(outfp); + print_system_event_mapping_table_suffix(outfp); + fclose(outfp); } ---->8---- Obviously I never tested building for one of test architectures which does not use PMU events - sorry! I'll review this more tomorrow. Thanks! > >> >> More results from testing: >> >> 59 13.57 ubuntu:16.04-x-arm : FAIL >> arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 >> 20160609 >> >> [perfbuilder@five ~]$ tail -20 dm.log/ubuntu\:16.04-x-arm >> CC /tmp/build/perf/util/expr.o >> LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o >> LD /tmp/build/perf/util/perf-in.o >> LD /tmp/build/perf/perf-in.o >> LINK /tmp/build/perf/perf >> /tmp/build/perf/perf-in.o: In function `pmu_for_each_sys_event': >> /git/linux/tools/perf/util/pmu.c:816: undefined reference to >> `pmu_sys_event_tables' >> /git/linux/tools/perf/util/pmu.c:816: undefined reference to >> `pmu_sys_event_tables' >> /tmp/build/perf/perf-in.o: In function `pmu_add_sys_aliases': >> /git/linux/tools/perf/util/pmu.c:886: undefined reference to >> `pmu_sys_event_tables' >> /git/linux/tools/perf/util/pmu.c:886: undefined reference to >> `pmu_sys_event_tables' >> collect2: error: ld returned 1 exit status >> Makefile.perf:659: recipe for target '/tmp/build/perf/perf' failed >> make[2]: *** [/tmp/build/perf/perf] Error 1 >> Makefile.perf:232: recipe for target 'sub-make' failed >> make[1]: *** [sub-make] Error 2 >> Makefile:69: recipe for target 'all' failed >> make: *** [all] Error 2 >> make: Leaving directory '/git/linux/tools/perf' >> + exit 1 [-- Attachment #2: 0001-perf-jevents-Add-system-events-table-for-empty-mappi.patch --] [-- Type: text/plain, Size: 2120 bytes --] From 201aa2cb7bc8723765afd84a5d3972248af0f0a1 Mon Sep 17 00:00:00 2001 From: John Garry <john.garry@huawei.com> Date: Thu, 10 Dec 2020 19:45:14 +0000 Subject: [PATCH] perf jevents: Add system events table for empty mapping For architectures which have no PMU event lists - like arm32 - an empty mapping table is printed. This is how the "pmu_events_map" symbol - referenced in util/pmu.c::perf_pmu__find_map() - is created for those architectures. Since pmu-events.c now includes a new table - "pmu_sys_event_tables" - which is also referenced from util/pmu.c, also add this for the empty mappings. Signed-off-by: John Garry <john.garry@huawei.com> diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c index e930096ad713..28e20d9ec0f5 100644 --- a/tools/perf/pmu-events/jevents.c +++ b/tools/perf/pmu-events/jevents.c @@ -816,19 +816,30 @@ static void print_mapping_test_table(FILE *outfp) fprintf(outfp, "},\n"); } +static void print_system_event_mapping_table_prefix(FILE *outfp) +{ + fprintf(outfp, "\nstruct pmu_sys_events pmu_sys_event_tables[] = {"); +} + +static void print_system_event_mapping_table_suffix(FILE *outfp) +{ + fprintf(outfp, "\n\t{\n\t\t.table = 0\n\t},"); + + fprintf(outfp, "\n};\n"); +} + static int process_system_event_tables(FILE *outfp) { struct sys_event_table *sys_event_table; - fprintf(outfp, "\nstruct pmu_sys_events pmu_sys_event_tables[] = {"); + print_system_event_mapping_table_prefix(outfp); list_for_each_entry(sys_event_table, &sys_event_tables, list) { fprintf(outfp, "\n\t{\n\t\t.table = %s,\n\t},", sys_event_table->soc_id); } - fprintf(outfp, "\n\t{\n\t\t.table = 0\n\t},"); - fprintf(outfp, "\n};\n"); + print_system_event_mapping_table_suffix(outfp); return 0; } @@ -938,6 +949,9 @@ static void create_empty_mapping(const char *output_file) fprintf(outfp, "#include \"pmu-events/pmu-events.h\"\n"); print_mapping_table_prefix(outfp); print_mapping_table_suffix(outfp); + print_system_event_mapping_table_prefix(outfp); + print_system_event_mapping_table_suffix(outfp); + fclose(outfp); } -- 2.26.2 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [BUG] jevents problem when cross building Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 19:57 ` John Garry @ 2020-12-16 11:41 ` John Garry 2020-12-16 14:01 ` Arnaldo Carvalho de Melo 0 siblings, 1 reply; 25+ messages in thread From: John Garry @ 2020-12-16 11:41 UTC (permalink / raw) To: Arnaldo Carvalho de Melo Cc: Jiri Olsa, Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian On 10/12/2020 19:57, John Garry wrote: > Hi Arnaldo, > > Can you try this on top: > > ----8<----- > > From 201aa2cb7bc8723765afd84a5d3972248af0f0a1 Mon Sep 17 00:00:00 2001 > From: John Garry <john.garry@huawei.com> > Date: Thu, 10 Dec 2020 19:45:14 +0000 > Subject: [PATCH] perf jevents: Add system events table for empty mapping > > For architectures which have no PMU event lists - like arm32 - an empty > mapping table is printed. This is how the "pmu_events_map" symbol - > referenced in util/pmu.c::perf_pmu__find_map() - is created for those > architectures. > > Since pmu-events.c now includes a new table - "pmu_sys_event_tables" - > which is also referenced from util/pmu.c, also add this for the empty > mappings. > > Signed-off-by: John Garry <john.garry@huawei.com> > > diff --git a/tools/perf/pmu-events/jevents.c > b/tools/perf/pmu-events/jevents.c > index e930096ad713..28e20d9ec0f5 100644 > --- a/tools/perf/pmu-events/jevents.c > +++ b/tools/perf/pmu-events/jevents.c > @@ -816,19 +816,30 @@ static void print_mapping_test_table(FILE *outfp) > fprintf(outfp, "},\n"); > } > > +static void print_system_event_mapping_table_prefix(FILE *outfp) > +{ > + fprintf(outfp, "\nstruct pmu_sys_events pmu_sys_event_tables[] = {"); > +} > + > +static void print_system_event_mapping_table_suffix(FILE *outfp) > +{ > + fprintf(outfp, "\n\t{\n\t\t.table = 0\n\t},"); > + > + fprintf(outfp, "\n};\n"); > +} > + > static int process_system_event_tables(FILE *outfp) > { > struct sys_event_table *sys_event_table; > > - fprintf(outfp, "\nstruct pmu_sys_events pmu_sys_event_tables[] = {"); > + print_system_event_mapping_table_prefix(outfp); > > list_for_each_entry(sys_event_table, &sys_event_tables, list) { > fprintf(outfp, "\n\t{\n\t\t.table = %s,\n\t},", > sys_event_table->soc_id); > } > - fprintf(outfp, "\n\t{\n\t\t.table = 0\n\t},"); > > - fprintf(outfp, "\n};\n"); > + print_system_event_mapping_table_suffix(outfp); > > return 0; > } > @@ -938,6 +949,9 @@ static void create_empty_mapping(const char > *output_file) > fprintf(outfp, "#include \"pmu-events/pmu-events.h\"\n"); > print_mapping_table_prefix(outfp); > print_mapping_table_suffix(outfp); > + print_system_event_mapping_table_prefix(outfp); > + print_system_event_mapping_table_suffix(outfp); > + > fclose(outfp); > } > > ---->8---- > > Obviously I never tested building for one of test architectures which > does not use PMU events - sorry! > Hi Arnaldo, Just wondering if you have had any more problems here? Shall I send a formal patch? I tested that change and it looked ok. Thanks, John ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [BUG] jevents problem when cross building Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-16 11:41 ` John Garry @ 2020-12-16 14:01 ` Arnaldo Carvalho de Melo 0 siblings, 0 replies; 25+ messages in thread From: Arnaldo Carvalho de Melo @ 2020-12-16 14:01 UTC (permalink / raw) To: John Garry Cc: Jiri Olsa, Alexei Budankov, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Em Wed, Dec 16, 2020 at 11:41:10AM +0000, John Garry escreveu: > On 10/12/2020 19:57, John Garry wrote: > > Obviously I never tested building for one of test architectures which > > does not use PMU events - sorry! > Just wondering if you have had any more problems here? Shall I send a formal > patch? I tested that change and it looked ok. I thought I had replied to this, I'll check my logs, but yeah, it fixed the problem, I folded into the cset that caused the problem, all my tests are Ok now and I've pushed it out to perf/core on git.kernel.org. Thanks! - Arnaldo ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 16:24 ` Jiri Olsa 2020-12-10 17:15 ` Arnaldo Carvalho de Melo @ 2020-12-10 18:06 ` Jiri Olsa 2020-12-10 18:20 ` Alexei Budankov 1 sibling, 1 reply; 25+ messages in thread From: Jiri Olsa @ 2020-12-10 18:06 UTC (permalink / raw) To: Alexei Budankov Cc: Jiri Olsa, Arnaldo Carvalho de Melo, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian On Thu, Dec 10, 2020 at 05:24:30PM +0100, Jiri Olsa wrote: > On Mon, Dec 07, 2020 at 08:02:20PM +0300, Alexei Budankov wrote: > > Hi, > > > > On 06.12.2020 20:05, Jiri Olsa wrote: > > > Adding new control events to enable/disable specific event. > > > The interface string for control file are: > > > > > > 'enable-<EVENT NAME>' > > > 'disable-<EVENT NAME>' > > > > <SNIP> > > > > > > > > when received the command, perf will scan the current evlist > > > for <EVENT NAME> and if found it's enabled/disabled. > > > > <SNIP> > > > > > diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c > > > index 70aff26612a9..05723227bebf 100644 > > > --- a/tools/perf/util/evlist.c > > > +++ b/tools/perf/util/evlist.c > > > @@ -1915,7 +1915,13 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, > > > bytes_read == data_size ? "" : c == '\n' ? "\\n" : "\\0"); > > > > > > if (bytes_read > 0) { > > > - if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > > > + if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_EVSEL_TAG, > > > + (sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG)-1))) { > > > + *cmd = EVLIST_CTL_CMD_ENABLE_EVSEL; > > > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_EVSEL_TAG, > > > + (sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG)-1))) { > > > + *cmd = EVLIST_CTL_CMD_DISABLE_EVSEL; > > > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > > > (sizeof(EVLIST_CTL_CMD_ENABLE_TAG)-1))) { > > > *cmd = EVLIST_CTL_CMD_ENABLE; > > > } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_TAG, > > > @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > > char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; > > > int ctlfd_pos = evlist->ctl_fd.pos; > > > struct pollfd *entries = evlist->core.pollfd.entries; > > > + struct evsel *evsel; > > > + char *evsel_name; > > > > > > if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) > > > return 0; > > > @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > > > case EVLIST_CTL_CMD_DISABLE: > > > evlist__disable(evlist); > > > break; > > > + case EVLIST_CTL_CMD_ENABLE_EVSEL: > > > + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; > > > > It makes sense to check that evsel_name still points > > into cmd_data buffer after assigning to event name. > > right, will add that actualy it's already checked in evlist__ctlfd_recv, evsel_name at worst will be empty string so evlist__find_evsel_by_str will fail I'll add '' around %s in the error output string: failed: can't find '%s' event so it's obvious when it's empty jirka ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 18:06 ` Jiri Olsa @ 2020-12-10 18:20 ` Alexei Budankov 2020-12-10 18:27 ` Arnaldo Carvalho de Melo 2020-12-10 18:32 ` Alexei Budankov 0 siblings, 2 replies; 25+ messages in thread From: Alexei Budankov @ 2020-12-10 18:20 UTC (permalink / raw) To: Jiri Olsa Cc: Jiri Olsa, Arnaldo Carvalho de Melo, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian On 10.12.2020 21:06, Jiri Olsa wrote: > On Thu, Dec 10, 2020 at 05:24:30PM +0100, Jiri Olsa wrote: >> On Mon, Dec 07, 2020 at 08:02:20PM +0300, Alexei Budankov wrote: >>> Hi, >>> >>> On 06.12.2020 20:05, Jiri Olsa wrote: >>>> Adding new control events to enable/disable specific event. >>>> The interface string for control file are: >>>> >>>> 'enable-<EVENT NAME>' >>>> 'disable-<EVENT NAME>' >>> >>> <SNIP> >>> >>>> >>>> when received the command, perf will scan the current evlist >>>> for <EVENT NAME> and if found it's enabled/disabled. >>> >>> <SNIP> >>> >>>> diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c >>>> index 70aff26612a9..05723227bebf 100644 >>>> --- a/tools/perf/util/evlist.c >>>> +++ b/tools/perf/util/evlist.c >>>> @@ -1915,7 +1915,13 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, >>>> bytes_read == data_size ? "" : c == '\n' ? "\\n" : "\\0"); >>>> >>>> if (bytes_read > 0) { >>>> - if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, >>>> + if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_EVSEL_TAG, >>>> + (sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG)-1))) { >>>> + *cmd = EVLIST_CTL_CMD_ENABLE_EVSEL; >>>> + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_EVSEL_TAG, >>>> + (sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG)-1))) { >>>> + *cmd = EVLIST_CTL_CMD_DISABLE_EVSEL; >>>> + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, >>>> (sizeof(EVLIST_CTL_CMD_ENABLE_TAG)-1))) { >>>> *cmd = EVLIST_CTL_CMD_ENABLE; >>>> } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_TAG, >>>> @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) >>>> char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; >>>> int ctlfd_pos = evlist->ctl_fd.pos; >>>> struct pollfd *entries = evlist->core.pollfd.entries; >>>> + struct evsel *evsel; >>>> + char *evsel_name; >>>> >>>> if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) >>>> return 0; >>>> @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) >>>> case EVLIST_CTL_CMD_DISABLE: >>>> evlist__disable(evlist); >>>> break; >>>> + case EVLIST_CTL_CMD_ENABLE_EVSEL: >>>> + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; >>> >>> It makes sense to check that evsel_name still points >>> into cmd_data buffer after assigning to event name. >> >> right, will add that > > actualy it's already checked in evlist__ctlfd_recv, evsel_name at > worst will be empty string so evlist__find_evsel_by_str will fail > > I'll add '' around %s in the error output string: > > failed: can't find '%s' event > > so it's obvious when it's empty Looks good to me. Thanks! Alexei > > jirka > > . > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 18:20 ` Alexei Budankov @ 2020-12-10 18:27 ` Arnaldo Carvalho de Melo 2020-12-10 18:32 ` Alexei Budankov 1 sibling, 0 replies; 25+ messages in thread From: Arnaldo Carvalho de Melo @ 2020-12-10 18:27 UTC (permalink / raw) To: Alexei Budankov Cc: Jiri Olsa, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Em Thu, Dec 10, 2020 at 09:20:42PM +0300, Alexei Budankov escreveu: > > On 10.12.2020 21:06, Jiri Olsa wrote: > > On Thu, Dec 10, 2020 at 05:24:30PM +0100, Jiri Olsa wrote: > >> On Mon, Dec 07, 2020 at 08:02:20PM +0300, Alexei Budankov wrote: > >>> Hi, > >>> > >>> On 06.12.2020 20:05, Jiri Olsa wrote: > >>>> Adding new control events to enable/disable specific event. > >>>> The interface string for control file are: > >>>> > >>>> 'enable-<EVENT NAME>' > >>>> 'disable-<EVENT NAME>' > >>> > >>> <SNIP> > >>> > >>>> > >>>> when received the command, perf will scan the current evlist > >>>> for <EVENT NAME> and if found it's enabled/disabled. > >>> > >>> <SNIP> > >>> > >>>> diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c > >>>> index 70aff26612a9..05723227bebf 100644 > >>>> --- a/tools/perf/util/evlist.c > >>>> +++ b/tools/perf/util/evlist.c > >>>> @@ -1915,7 +1915,13 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, > >>>> bytes_read == data_size ? "" : c == '\n' ? "\\n" : "\\0"); > >>>> > >>>> if (bytes_read > 0) { > >>>> - if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > >>>> + if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_EVSEL_TAG, > >>>> + (sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG)-1))) { > >>>> + *cmd = EVLIST_CTL_CMD_ENABLE_EVSEL; > >>>> + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_EVSEL_TAG, > >>>> + (sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG)-1))) { > >>>> + *cmd = EVLIST_CTL_CMD_DISABLE_EVSEL; > >>>> + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, > >>>> (sizeof(EVLIST_CTL_CMD_ENABLE_TAG)-1))) { > >>>> *cmd = EVLIST_CTL_CMD_ENABLE; > >>>> } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_TAG, > >>>> @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > >>>> char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; > >>>> int ctlfd_pos = evlist->ctl_fd.pos; > >>>> struct pollfd *entries = evlist->core.pollfd.entries; > >>>> + struct evsel *evsel; > >>>> + char *evsel_name; > >>>> > >>>> if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) > >>>> return 0; > >>>> @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > >>>> case EVLIST_CTL_CMD_DISABLE: > >>>> evlist__disable(evlist); > >>>> break; > >>>> + case EVLIST_CTL_CMD_ENABLE_EVSEL: > >>>> + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; > >>> > >>> It makes sense to check that evsel_name still points > >>> into cmd_data buffer after assigning to event name. > >> > >> right, will add that > > > > actualy it's already checked in evlist__ctlfd_recv, evsel_name at > > worst will be empty string so evlist__find_evsel_by_str will fail > > > > I'll add '' around %s in the error output string: > > > > failed: can't find '%s' event > > > > so it's obvious when it's empty > > Looks good to me. Thanks! I'm taking this as an Acked-by: you as per Documentation/process/submitting-patches.rst: <quoted> Acked-by: is not as formal as Signed-off-by:. It is a record that the acker has at least reviewed the patch and has indicated acceptance. Hence patch mergers will sometimes manually convert an acker's "yep, looks good to me" into an Acked-by: (but note that it is usually better to ask for an explicit ack). </> Thanks, - Arnaldo ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 2/3] perf tools: Allow to enable/disable events via control file 2020-12-10 18:20 ` Alexei Budankov 2020-12-10 18:27 ` Arnaldo Carvalho de Melo @ 2020-12-10 18:32 ` Alexei Budankov 1 sibling, 0 replies; 25+ messages in thread From: Alexei Budankov @ 2020-12-10 18:32 UTC (permalink / raw) To: Jiri Olsa Cc: Jiri Olsa, Arnaldo Carvalho de Melo, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian On 10.12.2020 21:20, Alexei Budankov wrote: > > On 10.12.2020 21:06, Jiri Olsa wrote: >> On Thu, Dec 10, 2020 at 05:24:30PM +0100, Jiri Olsa wrote: >>> On Mon, Dec 07, 2020 at 08:02:20PM +0300, Alexei Budankov wrote: >>>> Hi, >>>> >>>> On 06.12.2020 20:05, Jiri Olsa wrote: >>>>> Adding new control events to enable/disable specific event. >>>>> The interface string for control file are: >>>>> >>>>> 'enable-<EVENT NAME>' >>>>> 'disable-<EVENT NAME>' >>>> >>>> <SNIP> >>>> >>>>> >>>>> when received the command, perf will scan the current evlist >>>>> for <EVENT NAME> and if found it's enabled/disabled. >>>> >>>> <SNIP> >>>> >>>>> diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c >>>>> index 70aff26612a9..05723227bebf 100644 >>>>> --- a/tools/perf/util/evlist.c >>>>> +++ b/tools/perf/util/evlist.c >>>>> @@ -1915,7 +1915,13 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, >>>>> bytes_read == data_size ? "" : c == '\n' ? "\\n" : "\\0"); >>>>> >>>>> if (bytes_read > 0) { >>>>> - if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, >>>>> + if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_EVSEL_TAG, >>>>> + (sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG)-1))) { >>>>> + *cmd = EVLIST_CTL_CMD_ENABLE_EVSEL; >>>>> + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_EVSEL_TAG, >>>>> + (sizeof(EVLIST_CTL_CMD_DISABLE_EVSEL_TAG)-1))) { >>>>> + *cmd = EVLIST_CTL_CMD_DISABLE_EVSEL; >>>>> + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_ENABLE_TAG, >>>>> (sizeof(EVLIST_CTL_CMD_ENABLE_TAG)-1))) { >>>>> *cmd = EVLIST_CTL_CMD_ENABLE; >>>>> } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_DISABLE_TAG, >>>>> @@ -1952,6 +1958,8 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) >>>>> char cmd_data[EVLIST_CTL_CMD_MAX_LEN]; >>>>> int ctlfd_pos = evlist->ctl_fd.pos; >>>>> struct pollfd *entries = evlist->core.pollfd.entries; >>>>> + struct evsel *evsel; >>>>> + char *evsel_name; >>>>> >>>>> if (!evlist__ctlfd_initialized(evlist) || !entries[ctlfd_pos].revents) >>>>> return 0; >>>>> @@ -1967,6 +1975,26 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) >>>>> case EVLIST_CTL_CMD_DISABLE: >>>>> evlist__disable(evlist); >>>>> break; >>>>> + case EVLIST_CTL_CMD_ENABLE_EVSEL: >>>>> + evsel_name = cmd_data + sizeof(EVLIST_CTL_CMD_ENABLE_EVSEL_TAG) - 1; >>>> >>>> It makes sense to check that evsel_name still points >>>> into cmd_data buffer after assigning to event name. >>> >>> right, will add that >> >> actualy it's already checked in evlist__ctlfd_recv, evsel_name at >> worst will be empty string so evlist__find_evsel_by_str will fail >> >> I'll add '' around %s in the error output string: >> >> failed: can't find '%s' event >> >> so it's obvious when it's empty Acked-by: Alexei Budankov <abudankov@huawei.com> Thanks, Alexei ^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 3/3] perf tools: Allow to list events via control file 2020-12-06 17:05 [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe Jiri Olsa 2020-12-06 17:05 ` [PATCH 1/3] perf tools: Add evlist__disable_evsel/evlist__enable_evsel Jiri Olsa 2020-12-06 17:05 ` [PATCH 2/3] perf tools: Allow to enable/disable events via control file Jiri Olsa @ 2020-12-06 17:05 ` Jiri Olsa 2020-12-07 16:28 ` Arnaldo Carvalho de Melo 2020-12-07 13:25 ` [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe Namhyung Kim 3 siblings, 1 reply; 25+ messages in thread From: Jiri Olsa @ 2020-12-06 17:05 UTC (permalink / raw) To: Arnaldo Carvalho de Melo Cc: lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian, Alexei Budankov Adding new control event to display all evlist events. The interface string for control file is 'list'. When received, perf will scan and print current evlist into perf record terminal. Example session: terminal 1: # mkfifo control ack perf.pipe # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe Events disabled terminal 2: # echo list > control terminal 1: # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe ... sched:sched_kthread_stop sched:sched_kthread_stop_ret sched:sched_waking sched:sched_wakeup sched:sched_wakeup_new sched:sched_switch sched:sched_migrate_task sched:sched_process_free sched:sched_process_exit sched:sched_wait_task sched:sched_process_wait sched:sched_process_fork sched:sched_process_exec sched:sched_stat_wait sched:sched_stat_sleep sched:sched_stat_iowait sched:sched_stat_blocked sched:sched_stat_runtime sched:sched_pi_setprio sched:sched_move_numa sched:sched_stick_numa sched:sched_swap_numa sched:sched_wake_idle_without_ipi dummy:HG This new command is handy to get real event names when wildcards are used. Signed-off-by: Jiri Olsa <jolsa@kernel.org> --- tools/perf/builtin-record.c | 1 + tools/perf/builtin-stat.c | 1 + tools/perf/util/evlist.c | 6 ++++++ tools/perf/util/evlist.h | 2 ++ 4 files changed, 10 insertions(+) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 582b8fba012c..f620ed056c89 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -1951,6 +1951,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) case EVLIST_CTL_CMD_UNSUPPORTED: case EVLIST_CTL_CMD_ENABLE_EVSEL: case EVLIST_CTL_CMD_DISABLE_EVSEL: + case EVLIST_CTL_CMD_LIST: default: break; } diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 6a21fb665008..56f2206b5991 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -592,6 +592,7 @@ static void process_evlist(struct evlist *evlist, unsigned int interval) case EVLIST_CTL_CMD_UNSUPPORTED: case EVLIST_CTL_CMD_ENABLE_EVSEL: case EVLIST_CTL_CMD_DISABLE_EVSEL: + case EVLIST_CTL_CMD_LIST: default: break; } diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index 05723227bebf..c05476ca2ff4 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -1931,6 +1931,9 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, (sizeof(EVLIST_CTL_CMD_SNAPSHOT_TAG)-1))) { *cmd = EVLIST_CTL_CMD_SNAPSHOT; pr_debug("is snapshot\n"); + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_LIST_TAG, + (sizeof(EVLIST_CTL_CMD_LIST_TAG)-1))) { + *cmd = EVLIST_CTL_CMD_LIST; } } @@ -1995,6 +1998,9 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) pr_info("failed: can't find %s event\n", evsel_name); } break; + case EVLIST_CTL_CMD_LIST: + evlist__for_each_entry(evlist, evsel) + pr_info("%s\n", evsel__name(evsel)); case EVLIST_CTL_CMD_SNAPSHOT: break; case EVLIST_CTL_CMD_ACK: diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index e4e8ff8831a3..6b8a9918fdb2 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -332,6 +332,7 @@ struct evsel *evlist__reset_weak_group(struct evlist *evlist, struct evsel *evse #define EVLIST_CTL_CMD_SNAPSHOT_TAG "snapshot" #define EVLIST_CTL_CMD_ENABLE_EVSEL_TAG "enable-" #define EVLIST_CTL_CMD_DISABLE_EVSEL_TAG "disable-" +#define EVLIST_CTL_CMD_LIST_TAG "list" #define EVLIST_CTL_CMD_MAX_LEN 64 @@ -343,6 +344,7 @@ enum evlist_ctl_cmd { EVLIST_CTL_CMD_DISABLE_EVSEL, EVLIST_CTL_CMD_ACK, EVLIST_CTL_CMD_SNAPSHOT, + EVLIST_CTL_CMD_LIST, }; int evlist__parse_control(const char *str, int *ctl_fd, int *ctl_fd_ack, bool *ctl_fd_close); -- 2.26.2 ^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH 3/3] perf tools: Allow to list events via control file 2020-12-06 17:05 ` [PATCH 3/3] perf tools: Allow to list " Jiri Olsa @ 2020-12-07 16:28 ` Arnaldo Carvalho de Melo 2020-12-07 17:09 ` Alexei Budankov 2020-12-07 19:51 ` Jiri Olsa 0 siblings, 2 replies; 25+ messages in thread From: Arnaldo Carvalho de Melo @ 2020-12-07 16:28 UTC (permalink / raw) To: Jiri Olsa Cc: lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian, Alexei Budankov Em Sun, Dec 06, 2020 at 06:05:19PM +0100, Jiri Olsa escreveu: > Adding new control event to display all evlist events. > > The interface string for control file is 'list'. When > received, perf will scan and print current evlist into > perf record terminal. > > Example session: > > terminal 1: > # mkfifo control ack perf.pipe > # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe > Events disabled > > terminal 2: > # echo list > control > > terminal 1: > # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe > ... > sched:sched_kthread_stop > sched:sched_kthread_stop_ret > sched:sched_waking > sched:sched_wakeup > sched:sched_wakeup_new > sched:sched_switch > sched:sched_migrate_task > sched:sched_process_free > sched:sched_process_exit > sched:sched_wait_task > sched:sched_process_wait > sched:sched_process_fork > sched:sched_process_exec > sched:sched_stat_wait > sched:sched_stat_sleep > sched:sched_stat_iowait > sched:sched_stat_blocked > sched:sched_stat_runtime > sched:sched_pi_setprio > sched:sched_move_numa > sched:sched_stick_numa > sched:sched_swap_numa > sched:sched_wake_idle_without_ipi > dummy:HG > > This new command is handy to get real event names when > wildcards are used. Ok, would be nice to have a verbose mode like: [acme@five ~]$ sudo ~acme/bin/perf record -e 'sched:*' sleep 0.001 [ perf record: Woken up 14 times to write data ] [ perf record: Captured and wrote 0.023 MB perf.data (16 samples) ] [acme@five ~]$ sudo ~acme/bin/perf evlist sched:sched_kthread_stop sched:sched_kthread_stop_ret sched:sched_waking sched:sched_wakeup sched:sched_wakeup_new sched:sched_switch sched:sched_migrate_task sched:sched_process_free sched:sched_process_exit sched:sched_wait_task sched:sched_process_wait sched:sched_process_fork sched:sched_process_exec sched:sched_stat_wait sched:sched_stat_sleep sched:sched_stat_iowait sched:sched_stat_blocked sched:sched_stat_runtime sched:sched_pi_setprio sched:sched_move_numa sched:sched_stick_numa sched:sched_swap_numa sched:sched_wake_idle_without_ipi # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events [acme@five ~]$ sudo ~acme/bin/perf evlist -v sched:sched_kthread_stop: type: 2, size: 120, config: 0x13f, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 sched:sched_kthread_stop_ret: type: 2, size: 120, config: 0x13e, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_waking: type: 2, size: 120, config: 0x13d, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_wakeup: type: 2, size: 120, config: 0x13c, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_wakeup_new: type: 2, size: 120, config: 0x13b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_switch: type: 2, size: 120, config: 0x13a, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_migrate_task: type: 2, size: 120, config: 0x139, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_process_free: type: 2, size: 120, config: 0x138, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_process_exit: type: 2, size: 120, config: 0x137, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_wait_task: type: 2, size: 120, config: 0x136, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_process_wait: type: 2, size: 120, config: 0x135, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_process_fork: type: 2, size: 120, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_process_exec: type: 2, size: 120, config: 0x133, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_stat_wait: type: 2, size: 120, config: 0x132, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_stat_sleep: type: 2, size: 120, config: 0x131, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_stat_iowait: type: 2, size: 120, config: 0x130, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_stat_blocked: type: 2, size: 120, config: 0x12f, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_stat_runtime: type: 2, size: 120, config: 0x12e, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_pi_setprio: type: 2, size: 120, config: 0x12d, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_move_numa: type: 2, size: 120, config: 0x12c, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_stick_numa: type: 2, size: 120, config: 0x12b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_swap_numa: type: 2, size: 120, config: 0x12a, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 sched:sched_wake_idle_without_ipi: type: 2, size: 120, config: 0x129, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events [acme@five ~]$ Also I think we should use 'evlist' instead of 'list', to be consistent. Applied 1/3 and 2/3. - Arnaldo > Signed-off-by: Jiri Olsa <jolsa@kernel.org> > --- > tools/perf/builtin-record.c | 1 + > tools/perf/builtin-stat.c | 1 + > tools/perf/util/evlist.c | 6 ++++++ > tools/perf/util/evlist.h | 2 ++ > 4 files changed, 10 insertions(+) > > diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c > index 582b8fba012c..f620ed056c89 100644 > --- a/tools/perf/builtin-record.c > +++ b/tools/perf/builtin-record.c > @@ -1951,6 +1951,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) > case EVLIST_CTL_CMD_UNSUPPORTED: > case EVLIST_CTL_CMD_ENABLE_EVSEL: > case EVLIST_CTL_CMD_DISABLE_EVSEL: > + case EVLIST_CTL_CMD_LIST: > default: > break; > } > diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c > index 6a21fb665008..56f2206b5991 100644 > --- a/tools/perf/builtin-stat.c > +++ b/tools/perf/builtin-stat.c > @@ -592,6 +592,7 @@ static void process_evlist(struct evlist *evlist, unsigned int interval) > case EVLIST_CTL_CMD_UNSUPPORTED: > case EVLIST_CTL_CMD_ENABLE_EVSEL: > case EVLIST_CTL_CMD_DISABLE_EVSEL: > + case EVLIST_CTL_CMD_LIST: > default: > break; > } > diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c > index 05723227bebf..c05476ca2ff4 100644 > --- a/tools/perf/util/evlist.c > +++ b/tools/perf/util/evlist.c > @@ -1931,6 +1931,9 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, > (sizeof(EVLIST_CTL_CMD_SNAPSHOT_TAG)-1))) { > *cmd = EVLIST_CTL_CMD_SNAPSHOT; > pr_debug("is snapshot\n"); > + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_LIST_TAG, > + (sizeof(EVLIST_CTL_CMD_LIST_TAG)-1))) { > + *cmd = EVLIST_CTL_CMD_LIST; > } > } > > @@ -1995,6 +1998,9 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) > pr_info("failed: can't find %s event\n", evsel_name); > } > break; > + case EVLIST_CTL_CMD_LIST: > + evlist__for_each_entry(evlist, evsel) > + pr_info("%s\n", evsel__name(evsel)); > case EVLIST_CTL_CMD_SNAPSHOT: > break; > case EVLIST_CTL_CMD_ACK: > diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h > index e4e8ff8831a3..6b8a9918fdb2 100644 > --- a/tools/perf/util/evlist.h > +++ b/tools/perf/util/evlist.h > @@ -332,6 +332,7 @@ struct evsel *evlist__reset_weak_group(struct evlist *evlist, struct evsel *evse > #define EVLIST_CTL_CMD_SNAPSHOT_TAG "snapshot" > #define EVLIST_CTL_CMD_ENABLE_EVSEL_TAG "enable-" > #define EVLIST_CTL_CMD_DISABLE_EVSEL_TAG "disable-" > +#define EVLIST_CTL_CMD_LIST_TAG "list" > > #define EVLIST_CTL_CMD_MAX_LEN 64 > > @@ -343,6 +344,7 @@ enum evlist_ctl_cmd { > EVLIST_CTL_CMD_DISABLE_EVSEL, > EVLIST_CTL_CMD_ACK, > EVLIST_CTL_CMD_SNAPSHOT, > + EVLIST_CTL_CMD_LIST, > }; > > int evlist__parse_control(const char *str, int *ctl_fd, int *ctl_fd_ack, bool *ctl_fd_close); > -- > 2.26.2 > -- - Arnaldo ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 3/3] perf tools: Allow to list events via control file 2020-12-07 16:28 ` Arnaldo Carvalho de Melo @ 2020-12-07 17:09 ` Alexei Budankov 2020-12-07 19:53 ` Jiri Olsa 2020-12-07 19:51 ` Jiri Olsa 1 sibling, 1 reply; 25+ messages in thread From: Alexei Budankov @ 2020-12-07 17:09 UTC (permalink / raw) To: Arnaldo Carvalho de Melo, Jiri Olsa Cc: lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian Hi, On 07.12.2020 19:28, Arnaldo Carvalho de Melo wrote: > Em Sun, Dec 06, 2020 at 06:05:19PM +0100, Jiri Olsa escreveu: >> Adding new control event to display all evlist events. >> >> The interface string for control file is 'list'. When >> received, perf will scan and print current evlist into >> perf record terminal. >> >> Example session: >> >> terminal 1: >> # mkfifo control ack perf.pipe >> # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe >> Events disabled >> >> terminal 2: >> # echo list > control >> >> terminal 1: >> # perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe >> ... >> sched:sched_kthread_stop >> sched:sched_kthread_stop_ret >> sched:sched_waking >> sched:sched_wakeup >> sched:sched_wakeup_new >> sched:sched_switch >> sched:sched_migrate_task >> sched:sched_process_free >> sched:sched_process_exit >> sched:sched_wait_task >> sched:sched_process_wait >> sched:sched_process_fork >> sched:sched_process_exec >> sched:sched_stat_wait >> sched:sched_stat_sleep >> sched:sched_stat_iowait >> sched:sched_stat_blocked >> sched:sched_stat_runtime >> sched:sched_pi_setprio >> sched:sched_move_numa >> sched:sched_stick_numa >> sched:sched_swap_numa >> sched:sched_wake_idle_without_ipi >> dummy:HG >> >> This new command is handy to get real event names when >> wildcards are used. > > Ok, would be nice to have a verbose mode like: > > [acme@five ~]$ sudo ~acme/bin/perf record -e 'sched:*' sleep 0.001 > [ perf record: Woken up 14 times to write data ] > [ perf record: Captured and wrote 0.023 MB perf.data (16 samples) ] > [acme@five ~]$ sudo ~acme/bin/perf evlist > sched:sched_kthread_stop > sched:sched_kthread_stop_ret > sched:sched_waking > sched:sched_wakeup > sched:sched_wakeup_new > sched:sched_switch > sched:sched_migrate_task > sched:sched_process_free > sched:sched_process_exit > sched:sched_wait_task > sched:sched_process_wait > sched:sched_process_fork > sched:sched_process_exec > sched:sched_stat_wait > sched:sched_stat_sleep > sched:sched_stat_iowait > sched:sched_stat_blocked > sched:sched_stat_runtime > sched:sched_pi_setprio > sched:sched_move_numa > sched:sched_stick_numa > sched:sched_swap_numa > sched:sched_wake_idle_without_ipi > # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events > [acme@five ~]$ sudo ~acme/bin/perf evlist -v > sched:sched_kthread_stop: type: 2, size: 120, config: 0x13f, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 > sched:sched_kthread_stop_ret: type: 2, size: 120, config: 0x13e, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_waking: type: 2, size: 120, config: 0x13d, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_wakeup: type: 2, size: 120, config: 0x13c, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_wakeup_new: type: 2, size: 120, config: 0x13b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_switch: type: 2, size: 120, config: 0x13a, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_migrate_task: type: 2, size: 120, config: 0x139, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_process_free: type: 2, size: 120, config: 0x138, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_process_exit: type: 2, size: 120, config: 0x137, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_wait_task: type: 2, size: 120, config: 0x136, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_process_wait: type: 2, size: 120, config: 0x135, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_process_fork: type: 2, size: 120, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_process_exec: type: 2, size: 120, config: 0x133, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_stat_wait: type: 2, size: 120, config: 0x132, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_stat_sleep: type: 2, size: 120, config: 0x131, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_stat_iowait: type: 2, size: 120, config: 0x130, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_stat_blocked: type: 2, size: 120, config: 0x12f, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_stat_runtime: type: 2, size: 120, config: 0x12e, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_pi_setprio: type: 2, size: 120, config: 0x12d, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_move_numa: type: 2, size: 120, config: 0x12c, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_stick_numa: type: 2, size: 120, config: 0x12b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_swap_numa: type: 2, size: 120, config: 0x12a, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > sched:sched_wake_idle_without_ipi: type: 2, size: 120, config: 0x129, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events > [acme@five ~]$ > > Also I think we should use 'evlist' instead of 'list', to be consistent. FWIW, Or may be even name the command starting with a verb like 'list_events' Thanks, Alexei > > Applied 1/3 and 2/3. > > - Arnaldo > >> Signed-off-by: Jiri Olsa <jolsa@kernel.org> >> --- >> tools/perf/builtin-record.c | 1 + >> tools/perf/builtin-stat.c | 1 + >> tools/perf/util/evlist.c | 6 ++++++ >> tools/perf/util/evlist.h | 2 ++ >> 4 files changed, 10 insertions(+) >> >> diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c >> index 582b8fba012c..f620ed056c89 100644 >> --- a/tools/perf/builtin-record.c >> +++ b/tools/perf/builtin-record.c >> @@ -1951,6 +1951,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv) >> case EVLIST_CTL_CMD_UNSUPPORTED: >> case EVLIST_CTL_CMD_ENABLE_EVSEL: >> case EVLIST_CTL_CMD_DISABLE_EVSEL: >> + case EVLIST_CTL_CMD_LIST: >> default: >> break; >> } >> diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c >> index 6a21fb665008..56f2206b5991 100644 >> --- a/tools/perf/builtin-stat.c >> +++ b/tools/perf/builtin-stat.c >> @@ -592,6 +592,7 @@ static void process_evlist(struct evlist *evlist, unsigned int interval) >> case EVLIST_CTL_CMD_UNSUPPORTED: >> case EVLIST_CTL_CMD_ENABLE_EVSEL: >> case EVLIST_CTL_CMD_DISABLE_EVSEL: >> + case EVLIST_CTL_CMD_LIST: >> default: >> break; >> } >> diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c >> index 05723227bebf..c05476ca2ff4 100644 >> --- a/tools/perf/util/evlist.c >> +++ b/tools/perf/util/evlist.c >> @@ -1931,6 +1931,9 @@ static int evlist__ctlfd_recv(struct evlist *evlist, enum evlist_ctl_cmd *cmd, >> (sizeof(EVLIST_CTL_CMD_SNAPSHOT_TAG)-1))) { >> *cmd = EVLIST_CTL_CMD_SNAPSHOT; >> pr_debug("is snapshot\n"); >> + } else if (!strncmp(cmd_data, EVLIST_CTL_CMD_LIST_TAG, >> + (sizeof(EVLIST_CTL_CMD_LIST_TAG)-1))) { >> + *cmd = EVLIST_CTL_CMD_LIST; >> } >> } >> >> @@ -1995,6 +1998,9 @@ int evlist__ctlfd_process(struct evlist *evlist, enum evlist_ctl_cmd *cmd) >> pr_info("failed: can't find %s event\n", evsel_name); >> } >> break; >> + case EVLIST_CTL_CMD_LIST: >> + evlist__for_each_entry(evlist, evsel) >> + pr_info("%s\n", evsel__name(evsel)); >> case EVLIST_CTL_CMD_SNAPSHOT: >> break; >> case EVLIST_CTL_CMD_ACK: >> diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h >> index e4e8ff8831a3..6b8a9918fdb2 100644 >> --- a/tools/perf/util/evlist.h >> +++ b/tools/perf/util/evlist.h >> @@ -332,6 +332,7 @@ struct evsel *evlist__reset_weak_group(struct evlist *evlist, struct evsel *evse >> #define EVLIST_CTL_CMD_SNAPSHOT_TAG "snapshot" >> #define EVLIST_CTL_CMD_ENABLE_EVSEL_TAG "enable-" >> #define EVLIST_CTL_CMD_DISABLE_EVSEL_TAG "disable-" >> +#define EVLIST_CTL_CMD_LIST_TAG "list" >> >> #define EVLIST_CTL_CMD_MAX_LEN 64 >> >> @@ -343,6 +344,7 @@ enum evlist_ctl_cmd { >> EVLIST_CTL_CMD_DISABLE_EVSEL, >> EVLIST_CTL_CMD_ACK, >> EVLIST_CTL_CMD_SNAPSHOT, >> + EVLIST_CTL_CMD_LIST, >> }; >> >> int evlist__parse_control(const char *str, int *ctl_fd, int *ctl_fd_ack, bool *ctl_fd_close); >> -- >> 2.26.2 >> > ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 3/3] perf tools: Allow to list events via control file 2020-12-07 17:09 ` Alexei Budankov @ 2020-12-07 19:53 ` Jiri Olsa 0 siblings, 0 replies; 25+ messages in thread From: Jiri Olsa @ 2020-12-07 19:53 UTC (permalink / raw) To: Alexei Budankov Cc: Arnaldo Carvalho de Melo, Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian On Mon, Dec 07, 2020 at 08:09:06PM +0300, Alexei Budankov wrote: SNIP > > sched:sched_move_numa: type: 2, size: 120, config: 0x12c, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > > sched:sched_stick_numa: type: 2, size: 120, config: 0x12b, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > > sched:sched_swap_numa: type: 2, size: 120, config: 0x12a, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > > sched:sched_wake_idle_without_ipi: type: 2, size: 120, config: 0x129, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > > # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events > > [acme@five ~]$ > > > > Also I think we should use 'evlist' instead of 'list', to be consistent. > > FWIW, > > Or may be even name the command starting with a verb like 'list_events' I think evlist is better because there's 'perf evlist' command thanks, jirka ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 3/3] perf tools: Allow to list events via control file 2020-12-07 16:28 ` Arnaldo Carvalho de Melo 2020-12-07 17:09 ` Alexei Budankov @ 2020-12-07 19:51 ` Jiri Olsa 1 sibling, 0 replies; 25+ messages in thread From: Jiri Olsa @ 2020-12-07 19:51 UTC (permalink / raw) To: Arnaldo Carvalho de Melo Cc: Jiri Olsa, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Namhyung Kim, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian, Alexei Budankov On Mon, Dec 07, 2020 at 01:28:06PM -0300, Arnaldo Carvalho de Melo wrote: SNIP > > sched:sched_stick_numa > > sched:sched_swap_numa > > sched:sched_wake_idle_without_ipi > > dummy:HG > > > > This new command is handy to get real event names when > > wildcards are used. > > Ok, would be nice to have a verbose mode like: > > [acme@five ~]$ sudo ~acme/bin/perf record -e 'sched:*' sleep 0.001 > [ perf record: Woken up 14 times to write data ] > [ perf record: Captured and wrote 0.023 MB perf.data (16 samples) ] > [acme@five ~]$ sudo ~acme/bin/perf evlist > sched:sched_kthread_stop > sched:sched_kthread_stop_ret > sched:sched_waking > sched:sched_wakeup > sched:sched_wakeup_new > sched:sched_switch > sched:sched_migrate_task > sched:sched_process_free > sched:sched_process_exit > sched:sched_wait_task > sched:sched_process_wait > sched:sched_process_fork > sched:sched_process_exec > sched:sched_stat_wait > sched:sched_stat_sleep > sched:sched_stat_iowait > sched:sched_stat_blocked > sched:sched_stat_runtime > sched:sched_pi_setprio > sched:sched_move_numa > sched:sched_stick_numa > sched:sched_swap_numa > sched:sched_wake_idle_without_ipi > # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events > [acme@five ~]$ sudo ~acme/bin/perf evlist -v > sched:sched_kthread_stop: type: 2, size: 120, config: 0x13f, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 yea, hopefuly we won't be surprised what's enabled live in evsel ;-) SNIP > sched:sched_wake_idle_without_ipi: type: 2, size: 120, config: 0x129, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ID|CPU|PERIOD|RAW, read_format: ID, disabled: 1, inherit: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1 > # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events > [acme@five ~]$ > > Also I think we should use 'evlist' instead of 'list', to be consistent. ok, makes sense thanks, jirka ^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe 2020-12-06 17:05 [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe Jiri Olsa ` (2 preceding siblings ...) 2020-12-06 17:05 ` [PATCH 3/3] perf tools: Allow to list " Jiri Olsa @ 2020-12-07 13:25 ` Namhyung Kim 3 siblings, 0 replies; 25+ messages in thread From: Namhyung Kim @ 2020-12-07 13:25 UTC (permalink / raw) To: Jiri Olsa Cc: Arnaldo Carvalho de Melo, lkml, Peter Zijlstra, Ingo Molnar, Mark Rutland, Alexander Shishkin, Michael Petlan, Ian Rogers, Stephane Eranian, Alexei Budankov Hi Jiri, On Mon, Dec 7, 2020 at 2:05 AM Jiri Olsa <jolsa@kernel.org> wrote: > > hi, > adding support to enable/disable specific events via control > file via following commands: > > # echo enable-sched:sched_process_fork > control > # echo disabled-sched:sched_process_fork > control > > The code is available in here: > git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git > perf/control > > thanks, > jirka Acked-by: Namhyung Kim <namhyung@kernel.org> Thanks, Namhyung > --- > Jiri Olsa (3): > perf tools: Add evlist__disable_evsel/evlist__enable_evsel > perf tools: Allow to enable/disable events via control file > perf tools: Allow to list events via control file > > tools/perf/builtin-record.c | 3 +++ > tools/perf/builtin-stat.c | 3 +++ > tools/perf/util/evlist.c | 105 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---- > tools/perf/util/evlist.h | 8 ++++++++ > 4 files changed, 115 insertions(+), 4 deletions(-) > ^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2020-12-16 14:02 UTC | newest] Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-12-06 17:05 [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe Jiri Olsa 2020-12-06 17:05 ` [PATCH 1/3] perf tools: Add evlist__disable_evsel/evlist__enable_evsel Jiri Olsa 2020-12-07 17:12 ` Alexei Budankov 2020-12-06 17:05 ` [PATCH 2/3] perf tools: Allow to enable/disable events via control file Jiri Olsa 2020-12-07 17:02 ` Alexei Budankov 2020-12-10 16:24 ` Jiri Olsa 2020-12-10 17:15 ` Arnaldo Carvalho de Melo 2020-12-10 17:19 ` Arnaldo Carvalho de Melo 2020-12-10 17:26 ` [BUG] jevents problem when cross building " Arnaldo Carvalho de Melo 2020-12-10 17:44 ` John Garry 2020-12-10 18:17 ` Arnaldo Carvalho de Melo 2020-12-10 18:27 ` John Garry 2020-12-10 19:57 ` John Garry 2020-12-16 11:41 ` John Garry 2020-12-16 14:01 ` Arnaldo Carvalho de Melo 2020-12-10 18:06 ` Jiri Olsa 2020-12-10 18:20 ` Alexei Budankov 2020-12-10 18:27 ` Arnaldo Carvalho de Melo 2020-12-10 18:32 ` Alexei Budankov 2020-12-06 17:05 ` [PATCH 3/3] perf tools: Allow to list " Jiri Olsa 2020-12-07 16:28 ` Arnaldo Carvalho de Melo 2020-12-07 17:09 ` Alexei Budankov 2020-12-07 19:53 ` Jiri Olsa 2020-12-07 19:51 ` Jiri Olsa 2020-12-07 13:25 ` [PATCH 0/3] perf tools: Allow to enable/disable events via control pipe Namhyung Kim
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).