* [PATCH v2] kconfig: merge_config: avoid false positive matches from comment lines
@ 2018-11-05 8:19 Masahiro Yamada
2018-11-05 9:33 ` Arnout Vandecappelle
0 siblings, 1 reply; 3+ messages in thread
From: Masahiro Yamada @ 2018-11-05 8:19 UTC (permalink / raw)
To: linux-kbuild
Cc: Petr Vorel, Nasser, Arnout Vandecappelle, Masahiro Yamada, linux-kernel
The current SED_CONFIG_EXP could match to comment lines in config
fragment files, especially when CONFIG_PREFIX_ is empty. For example,
Buildroot uses empty prefixing; starting symbols with BR2_ is just
convention.
Make the sed expression more robust against false positives from
comment lines. The new sed expression matches to only valid patterns.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
---
Changes in v2:
- Another (more precise) implementation approach
based on the option from Arnout Vandecappelle.
This is still easier to read, but adds a bit duplication.
scripts/kconfig/merge_config.sh | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
index da66e77..0ef9064 100755
--- a/scripts/kconfig/merge_config.sh
+++ b/scripts/kconfig/merge_config.sh
@@ -102,7 +102,8 @@ if [ ! -r "$INITFILE" ]; then
fi
MERGE_LIST=$*
-SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)[= ].*/\2/p"
+SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p"
+SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p"
TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX)
@@ -116,7 +117,7 @@ for MERGE_FILE in $MERGE_LIST ; do
echo "The merge file '$MERGE_FILE' does not exist. Exit." >&2
exit 1
fi
- CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE)
+ CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE)
for CFG in $CFG_LIST ; do
grep -q -w $CFG $TMP_FILE || continue
@@ -159,7 +160,7 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET
# Check all specified config values took (might have missed-dependency issues)
-for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
+for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do
REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG")
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2] kconfig: merge_config: avoid false positive matches from comment lines
2018-11-05 8:19 [PATCH v2] kconfig: merge_config: avoid false positive matches from comment lines Masahiro Yamada
@ 2018-11-05 9:33 ` Arnout Vandecappelle
2018-11-09 16:20 ` Masahiro Yamada
0 siblings, 1 reply; 3+ messages in thread
From: Arnout Vandecappelle @ 2018-11-05 9:33 UTC (permalink / raw)
To: Masahiro Yamada, linux-kbuild; +Cc: Petr Vorel, Nasser, linux-kernel
On 05/11/18 09:19, Masahiro Yamada wrote:
> The current SED_CONFIG_EXP could match to comment lines in config
> fragment files, especially when CONFIG_PREFIX_ is empty. For example,
> Buildroot uses empty prefixing; starting symbols with BR2_ is just
> convention.
>
> Make the sed expression more robust against false positives from
> comment lines. The new sed expression matches to only valid patterns.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Regards,
Arnout
> ---
>
> Changes in v2:
> - Another (more precise) implementation approach
> based on the option from Arnout Vandecappelle.
> This is still easier to read, but adds a bit duplication.
>
> scripts/kconfig/merge_config.sh | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
> index da66e77..0ef9064 100755
> --- a/scripts/kconfig/merge_config.sh
> +++ b/scripts/kconfig/merge_config.sh
> @@ -102,7 +102,8 @@ if [ ! -r "$INITFILE" ]; then
> fi
>
> MERGE_LIST=$*
> -SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)[= ].*/\2/p"
> +SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p"
> +SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p"
>
> TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX)
>
> @@ -116,7 +117,7 @@ for MERGE_FILE in $MERGE_LIST ; do
> echo "The merge file '$MERGE_FILE' does not exist. Exit." >&2
> exit 1
> fi
> - CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE)
> + CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE)
>
> for CFG in $CFG_LIST ; do
> grep -q -w $CFG $TMP_FILE || continue
> @@ -159,7 +160,7 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET
>
>
> # Check all specified config values took (might have missed-dependency issues)
> -for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
> +for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do
>
> REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
> ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG")
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2] kconfig: merge_config: avoid false positive matches from comment lines
2018-11-05 9:33 ` Arnout Vandecappelle
@ 2018-11-09 16:20 ` Masahiro Yamada
0 siblings, 0 replies; 3+ messages in thread
From: Masahiro Yamada @ 2018-11-09 16:20 UTC (permalink / raw)
To: Arnout Vandecappelle
Cc: Linux Kbuild mailing list, Petr Vorel, nasser afshin,
Linux Kernel Mailing List
On Mon, Nov 5, 2018 at 6:35 PM Arnout Vandecappelle <arnout@mind.be> wrote:
>
>
>
> On 05/11/18 09:19, Masahiro Yamada wrote:
> > The current SED_CONFIG_EXP could match to comment lines in config
> > fragment files, especially when CONFIG_PREFIX_ is empty. For example,
> > Buildroot uses empty prefixing; starting symbols with BR2_ is just
> > convention.
> >
> > Make the sed expression more robust against false positives from
> > comment lines. The new sed expression matches to only valid patterns.
> >
> > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> > Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
>
> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
>
> Regards,
> Arnout
Applied to linux-kbuild.
> > ---
> >
> > Changes in v2:
> > - Another (more precise) implementation approach
> > based on the option from Arnout Vandecappelle.
> > This is still easier to read, but adds a bit duplication.
> >
> > scripts/kconfig/merge_config.sh | 7 ++++---
> > 1 file changed, 4 insertions(+), 3 deletions(-)
> >
> > diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
> > index da66e77..0ef9064 100755
> > --- a/scripts/kconfig/merge_config.sh
> > +++ b/scripts/kconfig/merge_config.sh
> > @@ -102,7 +102,8 @@ if [ ! -r "$INITFILE" ]; then
> > fi
> >
> > MERGE_LIST=$*
> > -SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)[= ].*/\2/p"
> > +SED_CONFIG_EXP1="s/^\(${CONFIG_PREFIX}[a-zA-Z0-9_]*\)=.*/\1/p"
> > +SED_CONFIG_EXP2="s/^# \(${CONFIG_PREFIX}[a-zA-Z0-9_]*\) is not set$/\1/p"
> >
> > TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX)
> >
> > @@ -116,7 +117,7 @@ for MERGE_FILE in $MERGE_LIST ; do
> > echo "The merge file '$MERGE_FILE' does not exist. Exit." >&2
> > exit 1
> > fi
> > - CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE)
> > + CFG_LIST=$(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $MERGE_FILE)
> >
> > for CFG in $CFG_LIST ; do
> > grep -q -w $CFG $TMP_FILE || continue
> > @@ -159,7 +160,7 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET
> >
> >
> > # Check all specified config values took (might have missed-dependency issues)
> > -for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
> > +for CFG in $(sed -n -e "$SED_CONFIG_EXP1" -e "$SED_CONFIG_EXP2" $TMP_FILE); do
> >
> > REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
> > ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG")
> >
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-09 16:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-05 8:19 [PATCH v2] kconfig: merge_config: avoid false positive matches from comment lines Masahiro Yamada
2018-11-05 9:33 ` Arnout Vandecappelle
2018-11-09 16:20 ` Masahiro Yamada
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).