* [PATCH] drm/radeon: Prevent multiple error lines on suspend
@ 2023-11-23 4:25 Woody Suwalski
2023-12-10 18:24 ` Woody Suwalski
0 siblings, 1 reply; 3+ messages in thread
From: Woody Suwalski @ 2023-11-23 4:25 UTC (permalink / raw)
To: LKML, amd-gfx; +Cc: Deucher, Alexander, Christian König
[-- Attachment #1: Type: text/plain, Size: 1494 bytes --]
# Fix to avoid multiple error lines printed on every suspend by Radeon
driver's debugfs.
#
# radeon_debugfs_init() calls debugfs_create_file() for every ring.
#
# This results in printing multiple error lines to the screen and dmesg
similar to this:
# debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already
present!
#
# The fix is to run lookup for the file before trying to (re)create that
debug file.
# Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c
b/drivers/gpu/drm/radeon/radeon_ring.c
index e6534fa9f1fb..72b1d2d31295 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -549,10 +549,15 @@ static void radeon_debugfs_ring_init(struct
radeon_device *rdev, struct radeon_r
#if defined(CONFIG_DEBUG_FS)
const char *ring_name = radeon_debugfs_ring_idx_to_name(ring->idx);
struct dentry *root = rdev->ddev->primary->debugfs_root;
-
- if (ring_name)
- debugfs_create_file(ring_name, 0444, root, ring,
- &radeon_debugfs_ring_info_fops);
+ struct dentry *lookup;
+
+ if (ring_name) {
+ if ((lookup = debugfs_lookup(ring_name, root)) == NULL)
+ debugfs_create_file(ring_name, 0444, root, ring,
+ &radeon_debugfs_ring_info_fops);
+ else
+ dput(lookup);
+ }
#endif
}
[-- Attachment #2: dmesg_radeon.txt --]
[-- Type: text/plain, Size: 100095 bytes --]
[ 0.000000] Linux version 6.7-pingu (kernel@pingu64builder) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #0~rc2 SMP PREEMPT_DYNAMIC Sun Nov 19 22:15:18 EST 2023
[ 0.000000] Command line: initrd=\EFI\Pingu\boot\init-6.7-pingu.img quiet net.ifnames=0 loop.max_part=7 root=/dev/sda7 resume=swap:/dev/sda6 log_buf_len=128k SHOWSPLASH=y splash systemd.show-status=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000086000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000093aecfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000093aed000-0x00000000942edfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000942ee000-0x000000009e17efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e17f000-0x000000009f97efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f97f000-0x000000009fb7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fb7f000-0x000000009fbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0x921db018-0x921e9c57] usable ==> usable
[ 0.000000] e820: update [mem 0x921db018-0x921e9c57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000086000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000921db017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000921db018-0x00000000921e9c57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000921e9c58-0x0000000093aecfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093aed000-0x00000000942edfff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000942ee000-0x000000009e17efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009e17f000-0x000000009f97efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009f97f000-0x000000009fb7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009fb7f000-0x000000009fbfefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009fc00000-0x00000000dfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] efi: EFI v2.3.1 by INSYDE Corp.
[ 0.000000] efi: ESRT=0x9f039d18 ACPI=0x9fbfe000 ACPI 2.0=0x9fbfe014 SMBIOS=0x9f97ef98 INITRD=0x9437cf98 RNG=0x9fbe6e18 TPMEventLog=0x921ea018
[ 0.000000] random: crng init done
[ 0.000000] TPM Final Events table not present
[ 0.000000] efi: Remove mem34: MMIO range=[0xf0900000-0xf09fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0900000-0xf09fffff] reserved
[ 0.000000] efi: Remove mem35: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ 0.000000] efi: Not removing mem36: MMIO range=[0xfec00000-0xfec01fff] (8KB) from e820 map
[ 0.000000] efi: Not removing mem37: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem38: MMIO range=[0xfed80000-0xfed80fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem39: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem40: MMIO range=[0xff800000-0xffffffff] (8MB) from e820 map
[ 0.000000] e820: remove [mem 0xff800000-0xffffffff] reserved
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: HP HP Notebook/80CB, BIOS F.28 05/17/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2195.964 MHz processor
[ 0.000029] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000034] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000045] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000059] MTRR map: 8 entries (3 fixed + 5 variable; max 20), built from 9 variable MTRRs
[ 0.000063] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000856] last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
[ 0.000902] esrt: Reserving ESRT space from 0x000000009f039d18 to 0x000000009f039d50.
[ 0.000919] Using GB pages for direct mapping
[ 0.002568] Secure boot disabled
[ 0.002570] RAMDISK: [mem 0x921ee000-0x93190fff]
[ 0.002580] ACPI: Early table checksum verification disabled
[ 0.002589] ACPI: RSDP 0x000000009FBFE014 000024 (v02 HPQOEM)
[ 0.002599] ACPI: XSDT 0x000000009FBC4188 0000D4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.002610] ACPI: FACP 0x000000009FBFB000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.002622] ACPI: DSDT 0x000000009FBE8000 00E67A (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
[ 0.002627] ACPI: FACS 0x000000009FB04000 000040
[ 0.002632] ACPI: TCPA 0x000000009FBFD000 000032 (v02 HPQOEM 80CB 00000000 HP 00040000)
[ 0.002637] ACPI: UEFI 0x000000009FBFC000 000236 (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002642] ACPI: HPET 0x000000009FBFA000 000038 (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002647] ACPI: APIC 0x000000009FBF9000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.002651] ACPI: MCFG 0x000000009FBF8000 00003C (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002656] ACPI: ASF! 0x000000009FBF7000 0000A5 (v32 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002661] ACPI: BOOT 0x000000009FBE7000 000028 (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002666] ACPI: FPDT 0x000000009FBE5000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.002671] ACPI: MSDM 0x000000009FBE4000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.002676] ACPI: SSDT 0x000000009FBE3000 000CB4 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002681] ACPI: SSDT 0x000000009FBDE000 0048A6 (v02 HPQOEM 80CB 00000002 ACPI 00040000)
[ 0.002685] ACPI: VFCT 0x000000009FBCF000 00EC84 (v01 HPQOEM 80CB 00000001 HP 00040000)
[ 0.002690] ACPI: SSDT 0x000000009FBCE000 00041A (v01 HPQOEM 80CB 00001000 ACPI 00040000)
[ 0.002695] ACPI: TPM2 0x000000009FBCD000 000044 (v03 HPQOEM 80CB 20505350 HP 00040000)
[ 0.002699] ACPI: SSDT 0x000000009FBCC000 000692 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002704] ACPI: SSDT 0x000000009FBCB000 000418 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002709] ACPI: SSDT 0x000000009FBC9000 0017D0 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002713] ACPI: SSDT 0x000000009FBC8000 00008C (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002718] ACPI: SSDT 0x000000009FBC6000 001153 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002723] ACPI: SSDT 0x000000009FBC3000 000F8A (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002728] ACPI: BGRT 0x000000009FBC5000 000038 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
[ 0.002731] ACPI: Reserving FACP table memory at [mem 0x9fbfb000-0x9fbfb10b]
[ 0.002734] ACPI: Reserving DSDT table memory at [mem 0x9fbe8000-0x9fbf6679]
[ 0.002736] ACPI: Reserving FACS table memory at [mem 0x9fb04000-0x9fb0403f]
[ 0.002737] ACPI: Reserving TCPA table memory at [mem 0x9fbfd000-0x9fbfd031]
[ 0.002739] ACPI: Reserving UEFI table memory at [mem 0x9fbfc000-0x9fbfc235]
[ 0.002740] ACPI: Reserving HPET table memory at [mem 0x9fbfa000-0x9fbfa037]
[ 0.002742] ACPI: Reserving APIC table memory at [mem 0x9fbf9000-0x9fbf908f]
[ 0.002743] ACPI: Reserving MCFG table memory at [mem 0x9fbf8000-0x9fbf803b]
[ 0.002745] ACPI: Reserving ASF! table memory at [mem 0x9fbf7000-0x9fbf70a4]
[ 0.002746] ACPI: Reserving BOOT table memory at [mem 0x9fbe7000-0x9fbe7027]
[ 0.002748] ACPI: Reserving FPDT table memory at [mem 0x9fbe5000-0x9fbe5043]
[ 0.002749] ACPI: Reserving MSDM table memory at [mem 0x9fbe4000-0x9fbe4054]
[ 0.002751] ACPI: Reserving SSDT table memory at [mem 0x9fbe3000-0x9fbe3cb3]
[ 0.002752] ACPI: Reserving SSDT table memory at [mem 0x9fbde000-0x9fbe28a5]
[ 0.002754] ACPI: Reserving VFCT table memory at [mem 0x9fbcf000-0x9fbddc83]
[ 0.002755] ACPI: Reserving SSDT table memory at [mem 0x9fbce000-0x9fbce419]
[ 0.002757] ACPI: Reserving TPM2 table memory at [mem 0x9fbcd000-0x9fbcd043]
[ 0.002758] ACPI: Reserving SSDT table memory at [mem 0x9fbcc000-0x9fbcc691]
[ 0.002760] ACPI: Reserving SSDT table memory at [mem 0x9fbcb000-0x9fbcb417]
[ 0.002761] ACPI: Reserving SSDT table memory at [mem 0x9fbc9000-0x9fbca7cf]
[ 0.002763] ACPI: Reserving SSDT table memory at [mem 0x9fbc8000-0x9fbc808b]
[ 0.002764] ACPI: Reserving SSDT table memory at [mem 0x9fbc6000-0x9fbc7152]
[ 0.002766] ACPI: Reserving SSDT table memory at [mem 0x9fbc3000-0x9fbc3f89]
[ 0.002767] ACPI: Reserving BGRT table memory at [mem 0x9fbc5000-0x9fbc5037]
[ 0.002867] No NUMA configuration found
[ 0.002869] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.002876] NODE_DATA(0) allocated [mem 0x21effc000-0x21effffff]
[ 0.002916] Zone ranges:
[ 0.002917] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002921] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.002923] Normal [mem 0x0000000100000000-0x000000021effffff]
[ 0.002925] Movable zone start for each node
[ 0.002927] Early memory node ranges
[ 0.002928] node 0: [mem 0x0000000000001000-0x000000000006dfff]
[ 0.002931] node 0: [mem 0x0000000000070000-0x0000000000085fff]
[ 0.002932] node 0: [mem 0x0000000000100000-0x0000000093aecfff]
[ 0.002935] node 0: [mem 0x00000000942ee000-0x000000009e17efff]
[ 0.002936] node 0: [mem 0x000000009fbff000-0x000000009fbfffff]
[ 0.002938] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.002941] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.002951] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002954] On node 0, zone DMA: 2 pages in unavailable ranges
[ 0.003040] On node 0, zone DMA: 122 pages in unavailable ranges
[ 0.026402] On node 0, zone DMA32: 2049 pages in unavailable ranges
[ 0.026683] On node 0, zone DMA32: 6784 pages in unavailable ranges
[ 0.070191] On node 0, zone Normal: 1024 pages in unavailable ranges
[ 0.070362] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.070482] ACPI: PM-Timer IO Port: 0x408
[ 0.070498] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.070501] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.070503] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.070504] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.070517] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.070525] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[ 0.070529] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.070534] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.070540] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.070543] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.070555] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.070588] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.070592] PM: hibernation: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
[ 0.070595] PM: hibernation: Registered nosave memory: [mem 0x00086000-0x000bffff]
[ 0.070596] PM: hibernation: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.070599] PM: hibernation: Registered nosave memory: [mem 0x921db000-0x921dbfff]
[ 0.070602] PM: hibernation: Registered nosave memory: [mem 0x921e9000-0x921e9fff]
[ 0.070605] PM: hibernation: Registered nosave memory: [mem 0x93aed000-0x942edfff]
[ 0.070608] PM: hibernation: Registered nosave memory: [mem 0x9e17f000-0x9f97efff]
[ 0.070610] PM: hibernation: Registered nosave memory: [mem 0x9f97f000-0x9fb7efff]
[ 0.070611] PM: hibernation: Registered nosave memory: [mem 0x9fb7f000-0x9fbfefff]
[ 0.070614] PM: hibernation: Registered nosave memory: [mem 0x9fc00000-0xdfffffff]
[ 0.070615] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
[ 0.070617] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.070618] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.070619] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.070620] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
[ 0.070622] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
[ 0.070623] PM: hibernation: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
[ 0.070624] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.070626] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.070629] [mem 0xe0000000-0xfebfffff] available for PCI devices
[ 0.070633] Booting paravirtualized kernel on bare hardware
[ 0.070639] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.078291] setup_percpu: NR_CPUS:8 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.079329] percpu: Embedded 45 pages/cpu s144168 r8192 d31960 u524288
[ 0.079361] pcpu-alloc: s144168 r8192 d31960 u524288 alloc=1*2097152
[ 0.079368] pcpu-alloc: [0] 0 1 2 3
[ 0.079422] Kernel command line: initrd=\EFI\Pingu\boot\init-6.7-pingu.img quiet net.ifnames=0 loop.max_part=7 root=/dev/sda7 resume=swap:/dev/sda6 log_buf_len=128k SHOWSPLASH=y splash systemd.show-status=0
[ 0.079684] Unknown kernel command line parameters "splash SHOWSPLASH=y", will be passed to user space.
[ 0.084506] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.086952] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.087030] Fallback order for Node 0: 0
[ 0.087041] Built 1 zonelists, mobility grouping on. Total pages: 1792345
[ 0.087044] Policy zone: Normal
[ 0.087049] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.087054] software IO TLB: area num 4.
[ 0.239147] Memory: 6979832K/7283720K available (14336K kernel code, 1097K rwdata, 4440K rodata, 2196K init, 756K bss, 303632K reserved, 0K cma-reserved)
[ 0.239267] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.240533] Dynamic Preempt: voluntary
[ 0.240620] rcu: Preemptible hierarchical RCU implementation.
[ 0.240622] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.240626] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.240627] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.240648] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16
[ 0.240914] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.241039] Console: colour dummy device 80x25
[ 0.241045] printk: legacy console [tty0] enabled
[ 0.241111] ACPI: Core revision 20230628
[ 0.241499] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.241530] APIC: Switch to symmetric I/O mode setup
[ 0.242097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.261526] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa74e462e5, max_idle_ns: 440795264032 ns
[ 0.261537] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.92 BogoMIPS (lpj=8783856)
[ 0.261561] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[ 0.261567] SVM disabled (by BIOS) in MSR_VM_CR
[ 0.261591] LVT offset 1 assigned for vector 0xf9
[ 0.261602] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.261604] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.261613] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.261618] Spectre V2 : Mitigation: Retpolines
[ 0.261620] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.261621] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.261623] Spectre V2 : Enabling Speculation Barrier for firmware calls
[ 0.261625] RETBleed: Mitigation: untrained return thunk
[ 0.261629] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.261633] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.261645] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.261648] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.261650] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.261653] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.261656] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.290212] Freeing SMP alternatives memory: 44K
[ 0.290231] pid_max: default: 32768 minimum: 301
[ 0.297713] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.297776] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.412999] smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
[ 0.413357] Performance Events: AMD PMU driver.
[ 0.413365] ... version: 0
[ 0.413367] ... bit width: 48
[ 0.413368] ... generic registers: 4
[ 0.413370] ... value mask: 0000ffffffffffff
[ 0.413371] ... max period: 00007fffffffffff
[ 0.413373] ... fixed-purpose events: 0
[ 0.413374] ... event mask: 000000000000000f
[ 0.413531] signal: max sigframe size: 1776
[ 0.413531] rcu: Hierarchical SRCU implementation.
[ 0.413531] rcu: Max phase no-delay instances is 1000.
[ 0.413531] smp: Bringing up secondary CPUs ...
[ 0.413531] smpboot: x86: Booting SMP configuration:
[ 0.413531] .... node #0, CPUs: #1 #2 #3
[ 0.004591] __common_interrupt: 1.55 No irq handler for vector
[ 0.004591] __common_interrupt: 2.55 No irq handler for vector
[ 0.004591] __common_interrupt: 3.55 No irq handler for vector
[ 0.419533] smp: Brought up 1 node, 4 CPUs
[ 0.419533] smpboot: Max logical packages: 1
[ 0.419533] smpboot: Total of 4 processors activated (17567.71 BogoMIPS)
[ 0.421941] devtmpfs: initialized
[ 0.422005] ACPI: PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[ 0.422005] ACPI: PM: Registering ACPI NVS region [mem 0x9f97f000-0x9fb7efff] (2097152 bytes)
[ 0.422005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.422005] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.422005] pinctrl core: initialized pinctrl subsystem
[ 0.422071] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.422503] thermal_sys: Registered thermal governor 'fair_share'
[ 0.422506] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.422508] thermal_sys: Registered thermal governor 'step_wise'
[ 0.422510] thermal_sys: Registered thermal governor 'user_space'
[ 0.422538] cpuidle: using governor ladder
[ 0.422546] cpuidle: using governor menu
[ 0.422582] Simple Boot Flag at 0x44 set to 0x1
[ 0.422582] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.422582] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.422582] PCI: not using MMCONFIG
[ 0.422582] PCI: Using configuration type 1 for base access
[ 0.422582] PCI: Using configuration type 1 for extended access
[ 0.487230] raid6: sse2x4 gen() 5764 MB/s
[ 0.555229] raid6: sse2x2 gen() 5655 MB/s
[ 0.623227] raid6: sse2x1 gen() 4687 MB/s
[ 0.623230] raid6: using algorithm sse2x4 gen() 5764 MB/s
[ 0.691230] raid6: .... xor() 2212 MB/s, rmw enabled
[ 0.691234] raid6: using ssse3x2 recovery algorithm
[ 0.691322] ACPI: Added _OSI(Module Device)
[ 0.691325] ACPI: Added _OSI(Processor Device)
[ 0.691327] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.691329] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.708628] ACPI: 10 ACPI AML tables successfully acquired and loaded
[ 0.711237] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.717610] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.717978] ACPI: EC: EC started
[ 0.717980] ACPI: EC: interrupt blocked
[ 0.718279] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.718284] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC used to handle transactions
[ 0.718288] ACPI: Interpreter enabled
[ 0.718326] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.718328] ACPI: Using IOAPIC for interrupt routing
[ 0.719542] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.721947] [Firmware Info]: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] not reserved in ACPI motherboard resources
[ 0.721952] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as EfiMemoryMappedIO
[ 0.721969] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.721972] PCI: Using E820 reservations for host bridge windows
[ 0.722254] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.814920] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.814938] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.814949] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.814953] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER PCIeCapability LTR]
[ 0.814956] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[ 0.814971] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.815330] PCI host bridge to bus 0000:00
[ 0.815334] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.815337] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.815341] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.815345] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000cffff window]
[ 0.815348] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000effff window]
[ 0.815351] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 0.815354] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
[ 0.815357] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
[ 0.815360] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.815382] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[ 0.815486] pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
[ 0.815500] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.815510] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.815518] pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff]
[ 0.815525] pci 0000:00:01.0: reg 0x24: [mem 0xf0d00000-0xf0d3ffff]
[ 0.815532] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.815539] pci 0000:00:01.0: enabling Extended Tags
[ 0.815552] pci 0000:00:01.0: BAR 0: assigned to efifb
[ 0.815557] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.815590] pci 0000:00:01.0: supports D1 D2
[ 0.815593] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.815726] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.815740] pci 0000:00:01.1: reg 0x10: [mem 0xf0d60000-0xf0d63fff 64bit]
[ 0.815766] pci 0000:00:01.1: enabling Extended Tags
[ 0.815798] pci 0000:00:01.1: supports D1 D2
[ 0.815868] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[ 0.815947] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[ 0.815980] pci 0000:00:02.1: enabling Extended Tags
[ 0.816021] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.816139] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.816172] pci 0000:00:02.4: enabling Extended Tags
[ 0.816225] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.816348] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[ 0.816381] pci 0000:00:02.5: enabling Extended Tags
[ 0.816420] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[ 0.816538] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[ 0.816549] pci 0000:00:08.0: reg 0x10: [mem 0xf0d40000-0xf0d5ffff 64bit pref]
[ 0.816556] pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
[ 0.816562] pci 0000:00:08.0: reg 0x1c: [mem 0xf0d70000-0xf0d70fff]
[ 0.816571] pci 0000:00:08.0: reg 0x24: [mem 0xf0d6a000-0xf0d6bfff]
[ 0.816664] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.816685] pci 0000:00:10.0: reg 0x10: [mem 0xf0d68000-0xf0d69fff 64bit]
[ 0.816778] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.816903] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[ 0.816918] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
[ 0.816926] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
[ 0.816934] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
[ 0.816943] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
[ 0.816951] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
[ 0.816959] pci 0000:00:11.0: reg 0x24: [mem 0xf0d6f000-0xf0d6f3ff]
[ 0.816999] pci 0000:00:11.0: PME# supported from D3hot
[ 0.817393] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
[ 0.817408] pci 0000:00:12.0: reg 0x10: [mem 0xf0d6e000-0xf0d6e0ff]
[ 0.817471] pci 0000:00:12.0: supports D1 D2
[ 0.817473] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.817589] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[ 0.817603] pci 0000:00:13.0: reg 0x10: [mem 0xf0d6d000-0xf0d6d0ff]
[ 0.817666] pci 0000:00:13.0: supports D1 D2
[ 0.817668] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.817771] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.817914] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.817931] pci 0000:00:14.2: reg 0x10: [mem 0xf0d64000-0xf0d67fff 64bit]
[ 0.817989] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.818103] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.818271] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[ 0.818289] pci 0000:00:14.7: reg 0x10: [mem 0xf0d6c000-0xf0d6c0ff 64bit]
[ 0.818342] pci 0000:00:14.7: PME# supported from D3cold
[ 0.818403] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[ 0.818470] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[ 0.818533] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[ 0.818598] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[ 0.818668] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[ 0.818730] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[ 0.818858] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.818945] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000
[ 0.818967] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.818996] pci 0000:02:00.0: reg 0x18: [mem 0xf0c00000-0xf0c03fff 64bit]
[ 0.819117] pci 0000:02:00.0: supports D1 D2
[ 0.819119] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819317] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 0.819323] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.819327] pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.819415] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[ 0.819439] pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.819467] pci 0000:03:00.0: reg 0x18: [mem 0xf0b00000-0xf0b00fff 64bit]
[ 0.819487] pci 0000:03:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[ 0.819602] pci 0000:03:00.0: supports D1 D2
[ 0.819604] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.819813] pci 0000:00:02.5: PCI bridge to [bus 03]
[ 0.819820] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
[ 0.819824] pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff]
[ 0.819829] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.902666] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.902757] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.902855] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.902950] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.903030] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.903094] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.903156] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.903219] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.903485] platform MSFT0101:00: failed to claim resource 0: [mem 0x9fb6e000-0x9fc6dfff]
[ 0.903495] acpi MSFT0101:00: platform device creation failed: -16
[ 0.903771] ACPI: EC: interrupt unblocked
[ 0.903773] ACPI: EC: event unblocked
[ 0.903776] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.903778] ACPI: EC: GPE=0x3
[ 0.903781] ACPI: \_SB_.PCI0.LPC0.EC0_: Boot DSDT EC initialization complete
[ 0.903784] ACPI: \_SB_.PCI0.LPC0.EC0_: EC: Used to handle transactions and events
[ 0.903856] iommu: Default domain type: Translated
[ 0.903859] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.903958] SCSI subsystem initialized
[ 0.903977] libata version 3.00 loaded.
[ 0.903977] efivars: Registered efivars operations
[ 0.903977] PCI: Using ACPI for IRQ routing
[ 0.903977] PCI: pci_cache_line_size set to 64 bytes
[ 0.903977] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x921db018-0x93ffffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x93aed000-0x93ffffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x9e17f000-0x9fffffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
[ 0.903977] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.905562] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.905562] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.905562] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.905565] vgaarb: loaded
[ 0.906200] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[ 0.906336] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.906344] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.909535] clocksource: Switched to clocksource tsc-early
[ 0.909535] pnp: PnP ACPI init
[ 0.909535] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 0.909535] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.909535] system 00:04: [io 0x0400-0x04cf] has been reserved
[ 0.909535] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.909535] system 00:04: [io 0x04d6] has been reserved
[ 0.909535] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.909535] system 00:04: [io 0x077a] has been reserved
[ 0.909535] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.909535] system 00:04: [io 0x0c14] has been reserved
[ 0.909535] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.909535] system 00:04: [io 0x0c6c] has been reserved
[ 0.909535] system 00:04: [io 0x0c6f] has been reserved
[ 0.909535] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.909535] system 00:04: [io 0x0840-0x0847] has been reserved
[ 0.909535] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.909535] system 00:05: [mem 0xff800000-0xffffffff] has been reserved
[ 0.997053] pnp: PnP ACPI: found 6 devices
[ 1.004358] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.004464] NET: Registered PF_INET protocol family
[ 1.004710] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 1.007436] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 1.007456] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.007463] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.007619] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 1.008362] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.008519] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.008593] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.008706] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.008729] pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.008738] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 1.008743] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 1.008766] pci 0000:00:02.1: BAR 8: assigned [mem 0xf0e00000-0xf0ffffff]
[ 1.008773] pci 0000:00:02.1: BAR 9: assigned [mem 0xf1000000-0xf11fffff 64bit pref]
[ 1.008778] pci 0000:00:02.1: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.008784] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 1.008790] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]
[ 1.008796] pci 0000:00:02.1: bridge window [mem 0xf0e00000-0xf0ffffff]
[ 1.008800] pci 0000:00:02.1: bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
[ 1.008805] pci 0000:00:02.4: PCI bridge to [bus 02]
[ 1.008809] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 1.008813] pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 1.008820] pci 0000:00:02.5: PCI bridge to [bus 03]
[ 1.008823] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
[ 1.008828] pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff]
[ 1.008832] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 1.008841] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.008844] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.008847] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.008850] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000cffff window]
[ 1.008853] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000effff window]
[ 1.008856] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xf7ffffff window]
[ 1.008859] pci_bus 0000:00: resource 10 [mem 0xfc000000-0xfed3ffff window]
[ 1.008862] pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
[ 1.008865] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.008867] pci_bus 0000:01: resource 1 [mem 0xf0e00000-0xf0ffffff]
[ 1.008870] pci_bus 0000:01: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref]
[ 1.008873] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 1.008876] pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
[ 1.008879] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.008881] pci_bus 0000:03: resource 1 [mem 0xf0b00000-0xf0bfffff]
[ 1.008884] pci_bus 0000:03: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[ 1.009023] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[ 1.019411] pci 0000:00:12.0: PME# does not work under D3, disabling it
[ 1.019581] pci 0000:00:13.0: PME# does not work under D3, disabling it
[ 1.019626] PCI: CLS 64 bytes, default 64
[ 1.019641] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.019643] software IO TLB: mapped [mem 0x0000000094d16000-0x0000000098d16000] (64MB)
[ 1.019736] Trying to unpack rootfs image as initramfs...
[ 1.019779] LVT offset 0 assigned for vector 0x400
[ 1.019883] perf: AMD IBS detected (0x000000ff)
[ 1.020502] Initialise system trusted keyrings
[ 1.020688] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.020704] zbud: loaded
[ 1.020999] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.045122] xor: automatically using best checksumming function avx
[ 1.045129] async_tx: api initialized (async)
[ 1.045133] Key type asymmetric registered
[ 1.045134] Asymmetric key parser 'x509' registered
[ 1.045136] Asymmetric key parser 'pkcs8' registered
[ 1.045177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.046680] ACPI: AC: AC Adapter [ACAD] (on-line)
[ 1.046774] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.046817] ACPI: button: Power Button [PWRB]
[ 1.046886] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.046931] ACPI: button: Lid Switch [LID]
[ 1.046989] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.047411] ACPI: button: Power Button [PWRF]
[ 1.047499] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.047684] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.047756] ACPI: \_PR_.C000: Found 2 idle states
[ 1.048109] ACPI: \_PR_.C001: Found 2 idle states
[ 1.048232] ACPI: \_PR_.C002: Found 2 idle states
[ 1.048353] ACPI: \_PR_.C003: Found 2 idle states
[ 1.068355] Linux agpgart interface v0.103
[ 1.068875] ACPI: bus type drm_connector registered
[ 1.073509] brd: module loaded
[ 1.075885] loop: module loaded
[ 1.076349] ahci 0000:00:11.0: version 3.0
[ 1.076674] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.076681] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 1.078040] scsi host0: ahci
[ 1.078279] scsi host1: ahci
[ 1.078368] ata1: SATA max UDMA/133 abar m1024@0xf0d6f000 port 0xf0d6f100 irq 29 lpm-pol 0
[ 1.078375] ata2: SATA max UDMA/133 abar m1024@0xf0d6f000 port 0xf0d6f180 irq 29 lpm-pol 0
[ 1.078828] tun: Universal TUN/TAP device driver, 1.6
[ 1.079045] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.094818] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.094841] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.095204] mousedev: PS/2 mouse device common for all mice
[ 1.095510] rtc_cmos 00:01: RTC can wake from S4
[ 1.095856] rtc_cmos 00:01: registered as rtc0
[ 1.095880] rtc_cmos 00:01: setting system clock to 2023-11-22T21:20:08 UTC (1700688008)
[ 1.095929] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.096046] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[ 1.096119] hid: raw HID events driver (C) Jiri Kosina
[ 1.096344] NET: Registered PF_PACKET protocol family
[ 1.096397] Key type dns_resolver registered
[ 1.096434] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[ 1.096905] microcode: CPU0: patch_level=0x07030106
[ 1.096926] microcode: CPU1: patch_level=0x07030106
[ 1.096945] microcode: CPU2: patch_level=0x07030106
[ 1.096961] microcode: CPU3: patch_level=0x07030106
[ 1.096970] microcode: Microcode Update Driver: v2.2.
[ 1.096990] IPI shorthand broadcast: enabled
[ 1.102346] sched_clock: Marking stable (1099483932, 591913)->(1111648476, -11572631)
[ 1.102626] registered taskstats version 1
[ 1.102630] Loading compiled-in X.509 certificates
[ 1.106075] Key type .fscrypt registered
[ 1.106086] Key type fscrypt-provisioning registered
[ 1.106762] Btrfs loaded, zoned=no, fsverity=no
[ 1.108876] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.548647] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.548687] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.549873] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX1P2C, max UDMA/100
[ 1.551329] ata2.00: ATAPI: hp DVDRW GUB0N, UB00, max UDMA/133
[ 1.551401] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.553434] ata2.00: configured for UDMA/133
[ 1.553889] ata1.00: configured for UDMA/100
[ 1.616803] ACPI: battery: Slot [BAT1] (battery present)
[ 1.619446] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 2C PQ: 0 ANSI: 5
[ 1.620018] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.620025] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.620044] sd 0:0:0:0: [sda] Write Protect is off
[ 1.620049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.620077] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.620116] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 1.625842] scsi 1:0:0:0: CD-ROM hp DVDRW GUB0N UB00 PQ: 0 ANSI: 5
[ 1.745613] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.746104] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.830453] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 1.859582] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 1.859603] psmouse serio1: synaptics: Your touchpad (PNP: SYN1efc PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 1.916670] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[ 1.953103] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 2.032628] tsc: Refined TSC clocksource calibration: 2195.881 MHz
[ 2.032651] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa6ffc1640, max_idle_ns: 440795239502 ns
[ 2.032687] clocksource: Switched to clocksource tsc
[ 2.702603] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 2.731732] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 2.731753] psmouse serio1: synaptics: Your touchpad (PNP: SYN1efc PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 2.788800] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
[ 2.825216] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 3.768877] Freeing initrd memory: 16012K
[ 3.780363] Key type encrypted registered
[ 3.780581] clk: Disabling unused clocks
[ 3.781633] Freeing unused kernel image (initmem) memory: 2196K
[ 3.822433] Write protecting the kernel read-only data: 20480k
[ 3.823674] Freeing unused kernel image (rodata/data gap) memory: 1704K
[ 3.823698] Run /init as init process
[ 3.823701] with arguments:
[ 3.823703] /init
[ 3.823705] splash
[ 3.823706] with environment:
[ 3.823708] HOME=/
[ 3.823709] TERM=linux
[ 3.823710] SHOWSPLASH=y
[ 3.824932] pingu: init start
[ 3.922198] pingu: detection done
[ 3.946001] PM: Image not found (code -22)
[ 4.018833] EXT4-fs (sda7): mounted filesystem 6056d8b6-b5a3-4fb7-80d5-b99b091b11ac r/w with ordered data mode. Quota mode: disabled.
[ 4.019069] pingu: user mounted
[ 7.913265] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
[ 8.290877] systemd[1]: Inserted module 'autofs4'
[ 8.636705] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 8.636720] systemd[1]: Detected architecture x86-64.
[ 8.680023] systemd[1]: Hostname set to <HPNotebook>.
[ 10.141781] systemd[1]: Queued start job for default target graphical.target.
[ 10.158485] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 10.159076] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 10.159478] systemd[1]: Created slice user.slice - User and Session Slice.
[ 10.159603] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 10.159693] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 10.159980] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 10.160061] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 10.160107] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 10.160164] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 10.160193] systemd[1]: Reached target slices.target - Slice Units.
[ 10.160252] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 10.160389] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 10.177632] systemd[1]: systemd-journald-audit.socket - Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit).
[ 10.178067] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 10.178291] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 10.197155] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 10.197446] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 10.197725] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 10.217048] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 10.218748] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 10.218961] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing).
[ 10.220915] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 10.222903] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 10.225114] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 10.227498] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 10.229829] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 10.232122] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 10.234508] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 10.235108] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 10.235117] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 10.237072] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 10.258281] pstore: Using crash dump compression: deflate
[ 10.284942] pstore: Registered efi_pstore as persistent store backend
[ 10.305789] fuse: init (API version 7.39)
[ 10.333568] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 10.497159] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 10.499214] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 10.501262] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 10.504382] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 10.504584] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 10.504992] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 10.509282] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 10.509566] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 10.510026] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 10.510256] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 10.510674] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 10.510901] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 10.511317] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 10.511548] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 10.511955] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 10.512177] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 10.512578] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 10.512816] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 10.514791] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 10.516361] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 10.516567] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 10.518527] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 10.519754] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 10.560836] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 10.561037] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 10.561122] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 10.581117] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 10.582977] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 10.583779] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 10.586116] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 10.659018] systemd[1]: Started systemd-journald.service - Journal Service.
[ 10.860688] systemd-journald[1224]: Received client request to flush runtime journal.
[ 12.050610] acpi_cpufreq: overriding BIOS provided _PSD data
[ 12.114058] input: Wireless hotkeys as /devices/virtual/input/input9
[ 12.148629] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20230628/utaddress-204)
[ 12.148648] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 12.204440] thermal LNXTHERM:00: registered as thermal_zone0
[ 12.204450] ACPI: thermal: Thermal Zone [TSZ0] (42 C)
[ 12.204709] thermal LNXTHERM:01: registered as thermal_zone1
[ 12.204713] ACPI: thermal: Thermal Zone [TSZ2] (20 C)
[ 12.312680] ACPI: bus type USB registered
[ 12.312784] usbcore: registered new interface driver usbfs
[ 12.312810] usbcore: registered new interface driver hub
[ 12.312842] usbcore: registered new device driver usb
[ 12.360921] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.360994] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.402231] [drm] radeon kernel modesetting enabled.
[ 12.402373] radeon 0000:00:01.0: vgaarb: deactivate vga console
[ 12.402756] [drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x103C:0x80CB 0x45).
[ 12.402786] [drm] doorbell mmio base: 0xF0000000
[ 12.402788] [drm] doorbell mmio size: 8388608
[ 12.402825] ATOM BIOS: AMD
[ 12.402924] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 12.402929] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 12.402936] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 12.402938] [drm] RAM width 128bits DDR
[ 12.403049] [drm] radeon: 1024M of VRAM memory ready
[ 12.403053] [drm] radeon: 2048M of GTT memory ready.
[ 12.403072] [drm] Loading mullins Microcode
[ 12.403076] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_pfp.bin
[ 12.490173] cryptd: max_cpu_qlen set to 1000
[ 12.578805] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.589490] r8169 0000:03:00.0 eth0: RTL8106e, 94:57:a5:ab:ef:b0, XID 449, IRQ 32
[ 12.647846] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 12.647871] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 12.647884] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 12.647894] ehci-pci 0000:00:12.0: debug port 2
[ 12.647966] ehci-pci 0000:00:12.0: irq 18, io mem 0xf0d6e000
[ 12.660779] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 12.660935] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 12.660943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.660948] usb usb1: Product: EHCI Host Controller
[ 12.660952] usb usb1: Manufacturer: Linux 6.7-pingu ehci_hcd
[ 12.660955] usb usb1: SerialNumber: 0000:00:12.0
[ 12.661376] hub 1-0:1.0: USB hub found
[ 12.661395] hub 1-0:1.0: 2 ports detected
[ 12.661723] ehci-pci 0000:00:13.0: EHCI Host Controller
[ 12.661738] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 12.661749] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 12.661762] ehci-pci 0000:00:13.0: debug port 2
[ 12.661822] ehci-pci 0000:00:13.0: irq 18, io mem 0xf0d6d000
[ 12.676785] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 12.676973] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 12.676983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.676989] usb usb2: Product: EHCI Host Controller
[ 12.676993] usb usb2: Manufacturer: Linux 6.7-pingu ehci_hcd
[ 12.676997] usb usb2: SerialNumber: 0000:00:13.0
[ 12.677456] hub 2-0:1.0: USB hub found
[ 12.677483] hub 2-0:1.0: 2 ports detected
[ 12.678317] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 12.678338] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 12.678520] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 12.679079] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 12.679094] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 12.679103] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 12.682030] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 12.682040] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.682045] usb usb3: Product: xHCI Host Controller
[ 12.682049] usb usb3: Manufacturer: Linux 6.7-pingu xhci-hcd
[ 12.682053] usb usb3: SerialNumber: 0000:00:10.0
[ 12.682437] hub 3-0:1.0: USB hub found
[ 12.682551] hub 3-0:1.0: 2 ports detected
[ 12.682823] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 12.682903] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 12.682910] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.682915] usb usb4: Product: xHCI Host Controller
[ 12.682919] usb usb4: Manufacturer: Linux 6.7-pingu xhci-hcd
[ 12.682922] usb usb4: SerialNumber: 0000:00:10.0
[ 12.683197] hub 4-0:1.0: USB hub found
[ 12.683215] hub 4-0:1.0: 2 ports detected
[ 12.700361] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 12.700376] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 12.766453] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 12.885211] sdhci: Secure Digital Host Controller Interface driver
[ 12.885222] sdhci: Copyright(c) Pierre Ossman
[ 12.916789] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 12.955313] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 12.958746] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.959303] AVX version of gcm_enc/dec engaged.
[ 12.959372] AES CTR mode by8 optimization enabled
[ 12.970027] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.970077] platform regulatory.0: Requesting firmware: regulatory.db
[ 13.026382] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_me.bin
[ 13.029444] platform regulatory.0: Requesting firmware: regulatory.db.p7s
[ 13.077197] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 13.077211] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.077784] hub 1-1:1.0: USB hub found
[ 13.077961] hub 1-1:1.0: 4 ports detected
[ 13.081463] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_ce.bin
[ 13.082246] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_mec.bin
[ 13.083181] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_rlc.bin
[ 13.083904] radeon 0000:00:01.0: Requesting firmware: radeon/mullins_sdma.bin
[ 13.084458] [drm] Internal thermal controller without fan control
[ 13.085477] [drm] radeon: dpm initialized
[ 13.085487] radeon 0000:00:01.0: Requesting firmware: radeon/bonaire_uvd.bin
[ 13.100745] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 13.100807] radeon 0000:00:01.0: Requesting firmware: radeon/BONAIRE_vce.bin
[ 13.113176] usb 2-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
[ 13.113191] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.113634] hub 2-1:1.0: USB hub found
[ 13.113787] hub 2-1:1.0: 4 ports detected
[ 13.116536] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 13.116576] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 13.156764] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 13.156949] radeon 0000:00:01.0: WB enabled
[ 13.156970] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 13.156976] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 13.156980] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 13.156984] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 13.156987] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 13.157581] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 13.157811] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 13.157816] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 13.158081] radeon 0000:00:01.0: radeon: using MSI.
[ 13.158116] [drm] radeon: irq initialized.
[ 13.160713] [drm] ring test on 0 succeeded in 3 usecs
[ 13.160786] [drm] ring test on 1 succeeded in 2 usecs
[ 13.160802] [drm] ring test on 2 succeeded in 2 usecs
[ 13.160988] [drm] ring test on 3 succeeded in 4 usecs
[ 13.160996] [drm] ring test on 4 succeeded in 3 usecs
[ 13.179940] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 13.186863] [drm] ring test on 5 succeeded in 1 usecs
[ 13.186904] [drm] UVD initialized successfully.
[ 13.192170] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[ 13.192869] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 13.197491] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 13.296165] [drm] ring test on 6 succeeded in 12 usecs
[ 13.296182] [drm] ring test on 7 succeeded in 2 usecs
[ 13.296184] [drm] VCE initialized successfully.
[ 13.296924] snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops radeon_audio_component_bind_ops [radeon])
[ 13.297301] [drm] ib test on ring 0 succeeded in 0 usecs
[ 13.297442] [drm] ib test on ring 1 succeeded in 0 usecs
[ 13.297582] [drm] ib test on ring 2 succeeded in 0 usecs
[ 13.297721] [drm] ib test on ring 3 succeeded in 0 usecs
[ 13.297858] [drm] ib test on ring 4 succeeded in 0 usecs
[ 13.376742] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 13.400742] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[ 13.485225] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 13.491265] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=b006, bcdDevice= 2.00
[ 13.491279] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.491282] usb 1-1.4: Product: Bluetooth Radio
[ 13.491285] usb 1-1.4: Manufacturer: Realtek
[ 13.491287] usb 1-1.4: SerialNumber: 00e04c000001
[ 13.551486] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 13.551501] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.551505] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 13.551509] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 13.551511] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 13.551514] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 13.551517] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 13.560177] usb 2-1.1: New USB device found, idVendor=05c8, idProduct=0382, bcdDevice= 1.03
[ 13.560199] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 13.560206] usb 2-1.1: Product: HP Truevision HD
[ 13.560212] usb 2-1.1: Manufacturer: Sonix Technology Co., Ltd.
[ 13.645736] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 13.645856] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 13.645959] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 13.694651] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
[ 13.694866] rtl8723be 0000:02:00.0: Requesting firmware: rtlwifi/rtl8723befw_36.bin
[ 13.700752] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 13.701224] rtlwifi: rtlwifi: wireless switch is on
[ 13.808850] [drm] ib test on ring 5 succeeded
[ 13.809441] [drm] ib test on ring 6 succeeded
[ 13.809897] [drm] ib test on ring 7 succeeded
[ 13.811901] [drm] radeon atom DIG backlight initialized
[ 13.811906] [drm] Radeon Display Connectors
[ 13.811908] [drm] Connector 0:
[ 13.811910] [drm] eDP-1
[ 13.811912] [drm] HPD1
[ 13.811913] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 13.811918] [drm] Encoders:
[ 13.811920] [drm] LCD1: INTERNAL_UNIPHY
[ 13.811922] [drm] Connector 1:
[ 13.811924] [drm] HDMI-A-1
[ 13.811925] [drm] HPD2
[ 13.811927] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 13.811931] [drm] Encoders:
[ 13.811932] [drm] DFP1: INTERNAL_UNIPHY
[ 13.811934] [drm] Connector 2:
[ 13.811936] [drm] VGA-1
[ 13.811938] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 13.811941] [drm] Encoders:
[ 13.811943] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 13.826090] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 13.836588] mc: Linux media interface: v0.10
[ 13.898419] Bluetooth: Core ver 2.22
[ 13.898464] NET: Registered PF_BLUETOOTH protocol family
[ 13.898467] Bluetooth: HCI device and connection manager initialized
[ 13.898475] Bluetooth: HCI socket layer initialized
[ 13.898478] Bluetooth: L2CAP socket layer initialized
[ 13.898486] Bluetooth: SCO socket layer initialized
[ 13.924146] videodev: Linux video capture interface: v2.00
[ 14.190283] [drm] fb mappable at 0xE0731000
[ 14.190295] [drm] vram apper at 0xE0000000
[ 14.190297] [drm] size 4325376
[ 14.190300] [drm] fb depth is 24
[ 14.190302] [drm] pitch is 5632
[ 14.190519] fbcon: radeondrmfb (fb0) is primary device
[ 14.190523] fbcon: Deferring console take-over
[ 14.190527] radeon 0000:00:01.0: [drm] fb0: radeondrmfb frame buffer device
[ 14.210966] usbcore: registered new interface driver btusb
[ 14.213215] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 14.214171] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 14.214177] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 14.214181] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 14.334000] usb 2-1.1: Found UVC 1.00 device HP Truevision HD (05c8:0382)
[ 14.368036] usbcore: registered new interface driver uvcvideo
[ 14.398105] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 14.398127] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 14.437998] Bluetooth: hci0: RTL: cfg_sz 44, total sz 22540
[ 15.263063] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 15.427051] [drm] amdgpu kernel modesetting enabled.
[ 16.428875] Adding 8388604k swap on /dev/sda6. Priority:-2 extents:1 across:8388604k
[ 23.905710] r8169 0000:03:00.0: Requesting firmware: rtl_nic/rtl8106e-1.fw
[ 23.922497] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 24.122741] fbcon: Taking over console
[ 24.124304] Console: switching to colour frame buffer device 170x48
[ 24.193968] r8169 0000:03:00.0 eth0: Link is Down
[ 27.614014] wlan0: 80 MHz not supported, disabling VHT
[ 27.624144] wlan0: authenticate with 6c:19:8f:cc:87:1c (local address=70:77:81:bf:d8:67)
[ 27.624155] wlan0: send auth to 6c:19:8f:cc:87:1c (try 1/3)
[ 27.627920] wlan0: authenticated
[ 27.628648] wlan0: associate with 6c:19:8f:cc:87:1c (try 1/3)
[ 27.632569] wlan0: RX AssocResp from 6c:19:8f:cc:87:1c (capab=0x431 status=0 aid=8)
[ 27.632882] wlan0: associated
[ 48.305211] warning: `eeeweather' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 221.734499] wlan0: deauthenticating from 6c:19:8f:cc:87:1c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 223.586338] PM: suspend entry (deep)
[ 223.664490] Filesystems sync: 0.078 seconds
[ 223.843987] (NULL device *): Requesting firmware: radeon/mullins_pfp.bin
[ 223.844049] (NULL device *): Requesting firmware: radeon/mullins_me.bin
[ 223.844169] (NULL device *): Requesting firmware: radeon/mullins_ce.bin
[ 223.844194] (NULL device *): Requesting firmware: radeon/mullins_mec.bin
[ 223.844307] (NULL device *): Requesting firmware: radeon/mullins_rlc.bin
[ 223.844449] (NULL device *): Requesting firmware: radeon/mullins_sdma.bin
[ 223.844467] (NULL device *): Requesting firmware: radeon/bonaire_uvd.bin
[ 223.844523] (NULL device *): Requesting firmware: radeon/BONAIRE_vce.bin
[ 223.844994] (NULL device *): Requesting firmware: rtlwifi/rtl8723befw_36.bin
[ 223.845518] (NULL device *): Requesting firmware: rtl_nic/rtl8106e-1.fw
[ 223.845558] (NULL device *): Requesting firmware: regulatory.db
[ 223.845652] (NULL device *): Requesting firmware: regulatory.db.p7s
[ 223.845671] (NULL device *): Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 223.845698] (NULL device *): Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 223.847974] Freezing user space processes
[ 223.849608] Freezing user space processes completed (elapsed 0.001 seconds)
[ 223.849628] OOM killer disabled.
[ 223.849630] Freezing remaining freezable tasks
[ 223.850937] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 223.850978] printk: Suspending console(s) (use no_console_suspend to debug)
[ 223.868760] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 223.899112] ata1.00: Entering standby power mode
[ 224.370794] ACPI: EC: interrupt blocked
[ 224.396017] ACPI: PM: Preparing to enter system sleep state S3
[ 224.396492] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.396768] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.397029] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.397291] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.397558] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.397825] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.398838] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.399109] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.399376] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.399643] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.399909] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.400176] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.400762] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.401032] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.401299] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.401566] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.401832] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.402099] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.402392] ACPI: EC: event blocked
[ 224.402395] ACPI: EC: EC stopped
[ 224.402397] ACPI: PM: Saving platform NVS memory
[ 224.402455] Disabling non-boot CPUs ...
[ 224.403874] smpboot: CPU 1 is now offline
[ 224.405889] smpboot: CPU 2 is now offline
[ 224.407992] smpboot: CPU 3 is now offline
[ 224.408859] ACPI: PM: Low-level resume complete
[ 224.408884] ACPI: EC: EC started
[ 224.408885] ACPI: PM: Restoring platform NVS memory
[ 224.408912] LVT offset 0 assigned for vector 0x400
[ 224.409327] Enabling non-boot CPUs ...
[ 224.409380] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 224.411790] ACPI: \_PR_.C001: Found 2 idle states
[ 224.411899] microcode: CPU1: patch_level=0x07030106
[ 224.412067] CPU1 is up
[ 224.412101] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 224.414574] ACPI: \_PR_.C002: Found 2 idle states
[ 224.414681] microcode: CPU2: patch_level=0x07030106
[ 224.414832] CPU2 is up
[ 224.414864] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 224.417354] ACPI: \_PR_.C003: Found 2 idle states
[ 224.417467] microcode: CPU3: patch_level=0x07030106
[ 224.417624] CPU3 is up
[ 224.418163] ACPI: PM: Waking up from system sleep state S3
[ 224.418989] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.419254] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.419513] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.419772] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.420031] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.420290] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 224.420946] ACPI: EC: interrupt unblocked
[ 224.422051] ACPI: EC: event unblocked
[ 224.423366] rtlwifi: rtlwifi: wireless switch is on
[ 224.445550] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 224.445694] radeon 0000:00:01.0: WB enabled
[ 224.445712] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 224.445716] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 224.445719] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 224.445722] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 224.445724] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 224.446212] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 224.446393] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 224.446395] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 224.446803] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present!
[ 224.446808] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present!
[ 224.446811] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present!
[ 224.446814] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present!
[ 224.446817] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present!
[ 224.448580] [drm] ring test on 0 succeeded in 3 usecs
[ 224.448646] [drm] ring test on 1 succeeded in 2 usecs
[ 224.448658] [drm] ring test on 2 succeeded in 2 usecs
[ 224.448845] [drm] ring test on 3 succeeded in 4 usecs
[ 224.448851] [drm] ring test on 4 succeeded in 3 usecs
[ 224.448854] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present!
[ 224.474684] [drm] ring test on 5 succeeded in 1 usecs
[ 224.474698] [drm] UVD initialized successfully.
[ 224.474701] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present!
[ 224.474704] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present!
[ 224.583865] [drm] ring test on 6 succeeded in 7 usecs
[ 224.583876] [drm] ring test on 7 succeeded in 2 usecs
[ 224.583877] [drm] VCE initialized successfully.
[ 224.584032] [drm] ib test on ring 0 succeeded in 0 usecs
[ 224.584173] [drm] ib test on ring 1 succeeded in 0 usecs
[ 224.584311] [drm] ib test on ring 2 succeeded in 0 usecs
[ 224.584451] [drm] ib test on ring 3 succeeded in 0 usecs
[ 224.584589] [drm] ib test on ring 4 succeeded in 0 usecs
[ 224.713274] usb 2-1.1: reset high-speed USB device number 3 using ehci-pci
[ 224.721326] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 224.993317] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 224.998118] ata2.00: configured for UDMA/133
[ 225.105495] [drm] ib test on ring 5 succeeded
[ 225.106170] [drm] ib test on ring 6 succeeded
[ 225.106644] [drm] ib test on ring 7 succeeded
[ 225.174722] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 225.203828] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 226.075023] OOM killer enabled.
[ 226.075029] Restarting tasks ... done.
[ 226.076704] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 226.077696] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 226.077705] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 226.077709] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 226.078418] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 226.078427] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 226.078474] Bluetooth: hci0: RTL: cfg_sz 44, total sz 22540
[ 226.561649] PM: suspend exit
[ 226.577785] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 226.870702] r8169 0000:03:00.0 eth0: Link is Down
[ 226.921326] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 226.924199] ata1.00: configured for UDMA/100
[ 226.943657] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 228.438689] wlan0: 80 MHz not supported, disabling VHT
[ 228.448822] wlan0: authenticate with 6c:19:8f:cc:87:1c (local address=70:77:81:bf:d8:67)
[ 228.448833] wlan0: send auth to 6c:19:8f:cc:87:1c (try 1/3)
[ 228.450295] wlan0: authenticated
[ 228.457294] wlan0: associate with 6c:19:8f:cc:87:1c (try 1/3)
[ 228.461402] wlan0: RX AssocResp from 6c:19:8f:cc:87:1c (capab=0x431 status=0 aid=8)
[ 228.461636] wlan0: associated
[ 330.677065] wlan0: deauthenticating from 6c:19:8f:cc:87:1c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 332.408412] PM: suspend entry (deep)
[ 332.489136] Filesystems sync: 0.080 seconds
[ 332.665986] (NULL device *): Requesting firmware: radeon/mullins_pfp.bin
[ 332.666283] (NULL device *): Requesting firmware: radeon/mullins_me.bin
[ 332.666623] (NULL device *): Requesting firmware: radeon/mullins_ce.bin
[ 332.666726] (NULL device *): Requesting firmware: radeon/mullins_mec.bin
[ 332.666961] (NULL device *): Requesting firmware: radeon/mullins_rlc.bin
[ 332.667344] (NULL device *): Requesting firmware: radeon/mullins_sdma.bin
[ 332.667354] (NULL device *): Requesting firmware: radeon/bonaire_uvd.bin
[ 332.667523] (NULL device *): Requesting firmware: radeon/BONAIRE_vce.bin
[ 332.671153] (NULL device *): Requesting firmware: rtlwifi/rtl8723befw_36.bin
[ 332.672441] (NULL device *): Requesting firmware: rtl_nic/rtl8106e-1.fw
[ 332.672557] (NULL device *): Requesting firmware: regulatory.db
[ 332.672801] (NULL device *): Requesting firmware: regulatory.db.p7s
[ 332.675640] Freezing user space processes
[ 332.677391] Freezing user space processes completed (elapsed 0.001 seconds)
[ 332.677404] OOM killer disabled.
[ 332.677406] Freezing remaining freezable tasks
[ 332.678755] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 332.678795] printk: Suspending console(s) (use no_console_suspend to debug)
[ 332.697380] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 332.718634] ata1.00: Entering standby power mode
[ 333.198322] ACPI: EC: interrupt blocked
[ 333.223513] ACPI: PM: Preparing to enter system sleep state S3
[ 333.223906] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.224184] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.224452] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.224720] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.224987] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.225296] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.226199] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.226469] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.226736] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.227003] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.227269] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.227536] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.228106] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.228376] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.228642] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.228909] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.229176] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.229443] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.229744] ACPI: EC: event blocked
[ 333.229747] ACPI: EC: EC stopped
[ 333.229749] ACPI: PM: Saving platform NVS memory
[ 333.229847] Disabling non-boot CPUs ...
[ 333.231471] smpboot: CPU 1 is now offline
[ 333.233712] smpboot: CPU 2 is now offline
[ 333.235811] smpboot: CPU 3 is now offline
[ 333.236536] ACPI: PM: Low-level resume complete
[ 333.236560] ACPI: EC: EC started
[ 333.236561] ACPI: PM: Restoring platform NVS memory
[ 333.236585] LVT offset 0 assigned for vector 0x400
[ 333.236967] Enabling non-boot CPUs ...
[ 333.237019] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 333.239449] ACPI: \_PR_.C001: Found 2 idle states
[ 333.239557] microcode: CPU1: patch_level=0x07030106
[ 333.239731] CPU1 is up
[ 333.239764] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 333.242232] ACPI: \_PR_.C002: Found 2 idle states
[ 333.242339] microcode: CPU2: patch_level=0x07030106
[ 333.242493] CPU2 is up
[ 333.242524] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 333.244999] ACPI: \_PR_.C003: Found 2 idle states
[ 333.245115] microcode: CPU3: patch_level=0x07030106
[ 333.245285] CPU3 is up
[ 333.245811] ACPI: PM: Waking up from system sleep state S3
[ 333.246653] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.246917] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.247177] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.247435] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.247694] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.247953] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 333.248605] ACPI: EC: interrupt unblocked
[ 333.249790] ACPI: EC: event unblocked
[ 333.250133] rtlwifi: rtlwifi: wireless switch is on
[ 333.273934] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 333.274080] radeon 0000:00:01.0: WB enabled
[ 333.274095] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 333.274099] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 333.274101] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 333.274104] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 333.274106] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 333.274605] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 333.274787] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 333.274790] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 333.275193] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present!
[ 333.275198] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present!
[ 333.275201] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present!
[ 333.275204] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present!
[ 333.275207] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present!
[ 333.276968] [drm] ring test on 0 succeeded in 2 usecs
[ 333.277035] [drm] ring test on 1 succeeded in 2 usecs
[ 333.277046] [drm] ring test on 2 succeeded in 2 usecs
[ 333.277233] [drm] ring test on 3 succeeded in 4 usecs
[ 333.277239] [drm] ring test on 4 succeeded in 3 usecs
[ 333.277242] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present!
[ 333.303071] [drm] ring test on 5 succeeded in 1 usecs
[ 333.303086] [drm] UVD initialized successfully.
[ 333.303088] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present!
[ 333.303092] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present!
[ 333.412254] [drm] ring test on 6 succeeded in 7 usecs
[ 333.412264] [drm] ring test on 7 succeeded in 2 usecs
[ 333.412265] [drm] VCE initialized successfully.
[ 333.412419] [drm] ib test on ring 0 succeeded in 0 usecs
[ 333.412561] [drm] ib test on ring 1 succeeded in 0 usecs
[ 333.412699] [drm] ib test on ring 2 succeeded in 0 usecs
[ 333.412838] [drm] ib test on ring 3 succeeded in 0 usecs
[ 333.412976] [drm] ib test on ring 4 succeeded in 0 usecs
[ 333.533896] usb 2-1.1: reset high-speed USB device number 3 using ehci-pci
[ 333.533942] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 333.821931] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 333.828162] ata2.00: configured for UDMA/133
[ 333.938113] [drm] ib test on ring 5 succeeded
[ 333.938695] [drm] ib test on ring 6 succeeded
[ 333.939153] [drm] ib test on ring 7 succeeded
[ 334.003304] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 334.032403] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 334.907756] OOM killer enabled.
[ 334.907761] Restarting tasks ... done.
[ 334.913598] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 334.916076] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 334.916088] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 334.916093] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 334.916853] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 334.916861] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 334.916933] Bluetooth: hci0: RTL: cfg_sz 44, total sz 22540
[ 335.506269] PM: suspend exit
[ 335.525826] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 335.681952] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 335.698223] ata1.00: configured for UDMA/100
[ 335.774416] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 335.803386] r8169 0000:03:00.0 eth0: Link is Down
[ 337.362689] wlan0: 80 MHz not supported, disabling VHT
[ 337.372793] wlan0: authenticate with 6c:19:8f:cc:87:1c (local address=70:77:81:bf:d8:67)
[ 337.372801] wlan0: send auth to 6c:19:8f:cc:87:1c (try 1/3)
[ 337.374688] wlan0: authenticated
[ 337.377947] wlan0: associate with 6c:19:8f:cc:87:1c (try 1/3)
[ 337.381768] wlan0: RX AssocResp from 6c:19:8f:cc:87:1c (capab=0x431 status=0 aid=8)
[ 337.381989] wlan0: associated
[ 404.316448] wlan0: deauthenticating from 6c:19:8f:cc:87:1c by local choice (Reason: 3=DEAUTH_LEAVING)
[ 406.048634] PM: suspend entry (deep)
[ 406.145957] Filesystems sync: 0.097 seconds
[ 406.305848] (NULL device *): Requesting firmware: radeon/mullins_pfp.bin
[ 406.306171] (NULL device *): Requesting firmware: radeon/mullins_me.bin
[ 406.306347] (NULL device *): Requesting firmware: radeon/mullins_ce.bin
[ 406.306441] (NULL device *): Requesting firmware: radeon/mullins_mec.bin
[ 406.306614] (NULL device *): Requesting firmware: radeon/mullins_rlc.bin
[ 406.306909] (NULL device *): Requesting firmware: radeon/mullins_sdma.bin
[ 406.306912] (NULL device *): Requesting firmware: radeon/bonaire_uvd.bin
[ 406.307047] (NULL device *): Requesting firmware: radeon/BONAIRE_vce.bin
[ 406.309107] (NULL device *): Requesting firmware: rtlwifi/rtl8723befw_36.bin
[ 406.309167] (NULL device *): Requesting firmware: rtl_nic/rtl8106e-1.fw
[ 406.309249] (NULL device *): Requesting firmware: regulatory.db
[ 406.309433] (NULL device *): Requesting firmware: regulatory.db.p7s
[ 406.309517] (NULL device *): Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 406.310817] (NULL device *): Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 406.313217] Freezing user space processes
[ 406.314926] Freezing user space processes completed (elapsed 0.001 seconds)
[ 406.314939] OOM killer disabled.
[ 406.314942] Freezing remaining freezable tasks
[ 406.316287] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 406.316329] printk: Suspending console(s) (use no_console_suspend to debug)
[ 406.346127] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 406.356131] ata1.00: Entering standby power mode
[ 407.207034] ACPI: EC: interrupt blocked
[ 407.232316] ACPI: PM: Preparing to enter system sleep state S3
[ 407.232674] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.232952] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.233220] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.233488] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.233755] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.234025] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.234908] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.235178] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.235445] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.235712] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.235978] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.236245] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.236807] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.237076] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.237343] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.237610] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.237880] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.238148] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.238442] ACPI: EC: event blocked
[ 407.238445] ACPI: EC: EC stopped
[ 407.238447] ACPI: PM: Saving platform NVS memory
[ 407.238515] Disabling non-boot CPUs ...
[ 407.239953] smpboot: CPU 1 is now offline
[ 407.242080] smpboot: CPU 2 is now offline
[ 407.244106] smpboot: CPU 3 is now offline
[ 407.244919] ACPI: PM: Low-level resume complete
[ 407.244943] ACPI: EC: EC started
[ 407.244944] ACPI: PM: Restoring platform NVS memory
[ 407.244969] LVT offset 0 assigned for vector 0x400
[ 407.245333] Enabling non-boot CPUs ...
[ 407.245383] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 407.247819] ACPI: \_PR_.C001: Found 2 idle states
[ 407.247926] microcode: CPU1: patch_level=0x07030106
[ 407.248100] CPU1 is up
[ 407.248133] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 407.250612] ACPI: \_PR_.C002: Found 2 idle states
[ 407.250719] microcode: CPU2: patch_level=0x07030106
[ 407.250869] CPU2 is up
[ 407.250899] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 407.253370] ACPI: \_PR_.C003: Found 2 idle states
[ 407.253483] microcode: CPU3: patch_level=0x07030106
[ 407.253649] CPU3 is up
[ 407.254177] ACPI: PM: Waking up from system sleep state S3
[ 407.254995] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.255260] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.255520] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.255779] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.256037] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.256296] ACPI Warning: Time parameter 255 us > 100 us violating ACPI spec, please fix the firmware. (20230628/exsystem-141)
[ 407.256947] ACPI: EC: interrupt unblocked
[ 407.258144] ACPI: EC: event unblocked
[ 407.258238] rtlwifi: rtlwifi: wireless switch is on
[ 407.282814] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 407.282948] radeon 0000:00:01.0: WB enabled
[ 407.282963] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[ 407.282966] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04
[ 407.282969] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08
[ 407.282972] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[ 407.282974] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10
[ 407.283454] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30
[ 407.283634] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18
[ 407.283637] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c
[ 407.284043] debugfs: File 'radeon_ring_gfx' in directory '0000:00:01.0' already present!
[ 407.284049] debugfs: File 'radeon_ring_cp1' in directory '0000:00:01.0' already present!
[ 407.284051] debugfs: File 'radeon_ring_cp2' in directory '0000:00:01.0' already present!
[ 407.284054] debugfs: File 'radeon_ring_dma1' in directory '0000:00:01.0' already present!
[ 407.284057] debugfs: File 'radeon_ring_dma2' in directory '0000:00:01.0' already present!
[ 407.285819] [drm] ring test on 0 succeeded in 3 usecs
[ 407.285885] [drm] ring test on 1 succeeded in 2 usecs
[ 407.285897] [drm] ring test on 2 succeeded in 2 usecs
[ 407.286083] [drm] ring test on 3 succeeded in 4 usecs
[ 407.286090] [drm] ring test on 4 succeeded in 3 usecs
[ 407.286093] debugfs: File 'radeon_ring_uvd' in directory '0000:00:01.0' already present!
[ 407.311923] [drm] ring test on 5 succeeded in 1 usecs
[ 407.311937] [drm] UVD initialized successfully.
[ 407.311940] debugfs: File 'radeon_ring_vce1' in directory '0000:00:01.0' already present!
[ 407.311943] debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already present!
[ 407.421105] [drm] ring test on 6 succeeded in 7 usecs
[ 407.421115] [drm] ring test on 7 succeeded in 2 usecs
[ 407.421116] [drm] VCE initialized successfully.
[ 407.421270] [drm] ib test on ring 0 succeeded in 0 usecs
[ 407.421412] [drm] ib test on ring 1 succeeded in 0 usecs
[ 407.421549] [drm] ib test on ring 2 succeeded in 0 usecs
[ 407.421690] [drm] ib test on ring 3 succeeded in 0 usecs
[ 407.421829] [drm] ib test on ring 4 succeeded in 0 usecs
[ 407.542542] usb 2-1.1: reset high-speed USB device number 3 using ehci-pci
[ 407.546588] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci
[ 407.830645] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 407.836778] ata2.00: configured for UDMA/133
[ 407.922675] [drm] ib test on ring 5 succeeded
[ 407.923287] [drm] ib test on ring 6 succeeded
[ 407.923758] [drm] ib test on ring 7 succeeded
[ 408.015760] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
[ 408.044880] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
[ 408.892158] OOM killer enabled.
[ 408.892163] Restarting tasks ... done.
[ 408.898571] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 408.900418] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 408.900433] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin
[ 408.900440] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_fw.bin
[ 408.901469] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin
[ 408.901474] bluetooth hci0: Requesting firmware: rtl_bt/rtl8723b_config.bin
[ 408.901520] Bluetooth: hci0: RTL: cfg_sz 44, total sz 22540
[ 409.482608] PM: suspend exit
[ 409.503021] RTL8208 Fast Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[ 409.690650] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 409.708894] ata1.00: configured for UDMA/100
[ 409.761416] Bluetooth: hci0: RTL: fw version 0x0e2f9f73
[ 409.791932] r8169 0000:03:00.0 eth0: Link is Down
[ 411.362132] wlan0: 80 MHz not supported, disabling VHT
[ 411.372278] wlan0: authenticate with 6c:19:8f:cc:87:1c (local address=70:77:81:bf:d8:67)
[ 411.372297] wlan0: send auth to 6c:19:8f:cc:87:1c (try 1/3)
[ 411.373796] wlan0: authenticated
[ 411.374759] wlan0: associate with 6c:19:8f:cc:87:1c (try 1/3)
[ 411.379614] wlan0: RX AssocResp from 6c:19:8f:cc:87:1c (capab=0x431 status=0 aid=8)
[ 411.379860] wlan0: associated
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] drm/radeon: Prevent multiple error lines on suspend
2023-11-23 4:25 [PATCH] drm/radeon: Prevent multiple error lines on suspend Woody Suwalski
@ 2023-12-10 18:24 ` Woody Suwalski
2023-12-11 10:54 ` Christian König
0 siblings, 1 reply; 3+ messages in thread
From: Woody Suwalski @ 2023-12-10 18:24 UTC (permalink / raw)
To: LKML, amd-gfx; +Cc: Deucher, Alexander, Christian König, terraluna977
Hello, it has been now over 2 weeks and I have not seen any response to
this patch.
Has it been lost in the cracks of the wide internet ? :-(
Thanks, Woody
Woody Suwalski wrote:
> # Fix to avoid multiple error lines printed on every suspend by Radeon
> driver's debugfs.
> #
> # radeon_debugfs_init() calls debugfs_create_file() for every ring.
> #
> # This results in printing multiple error lines to the screen and
> dmesg similar to this:
> # debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0' already
> present!
> #
> # The fix is to run lookup for the file before trying to (re)create
> that debug file.
>
> # Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
>
> diff --git a/drivers/gpu/drm/radeon/radeon_ring.c
> b/drivers/gpu/drm/radeon/radeon_ring.c
> index e6534fa9f1fb..72b1d2d31295 100644
> --- a/drivers/gpu/drm/radeon/radeon_ring.c
> +++ b/drivers/gpu/drm/radeon/radeon_ring.c
> @@ -549,10 +549,15 @@ static void radeon_debugfs_ring_init(struct
> radeon_device *rdev, struct radeon_r
> #if defined(CONFIG_DEBUG_FS)
> const char *ring_name = radeon_debugfs_ring_idx_to_name(ring->idx);
> struct dentry *root = rdev->ddev->primary->debugfs_root;
> -
> - if (ring_name)
> - debugfs_create_file(ring_name, 0444, root, ring,
> - &radeon_debugfs_ring_info_fops);
> + struct dentry *lookup;
> +
> + if (ring_name) {
> + if ((lookup = debugfs_lookup(ring_name, root)) == NULL)
> + debugfs_create_file(ring_name, 0444, root, ring,
> + &radeon_debugfs_ring_info_fops);
> + else
> + dput(lookup);
> + }
>
> #endif
> }
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] drm/radeon: Prevent multiple error lines on suspend
2023-12-10 18:24 ` Woody Suwalski
@ 2023-12-11 10:54 ` Christian König
0 siblings, 0 replies; 3+ messages in thread
From: Christian König @ 2023-12-11 10:54 UTC (permalink / raw)
To: Woody Suwalski, LKML, amd-gfx; +Cc: Deucher, Alexander
Am 10.12.23 um 19:24 schrieb Woody Suwalski:
> Hello, it has been now over 2 weeks and I have not seen any response
> to this patch.
> Has it been lost in the cracks of the wide internet ? :-(
Well your patch is malformed ("#" before each line in the commit
message) and probably ended up being ignored because of that.
Apart from that it would probably be much easier to move the call to
radeon_debugfs_ring_init() into the if (ring->ring_obj == NULL) check in
the caller.
Regards,
Christian.
>
> Thanks, Woody
>
>
> Woody Suwalski wrote:
>> # Fix to avoid multiple error lines printed on every suspend by
>> Radeon driver's debugfs.
>> #
>> # radeon_debugfs_init() calls debugfs_create_file() for every ring.
>> #
>> # This results in printing multiple error lines to the screen and
>> dmesg similar to this:
>> # debugfs: File 'radeon_ring_vce2' in directory '0000:00:01.0'
>> already present!
>> #
>> # The fix is to run lookup for the file before trying to (re)create
>> that debug file.
>>
>> # Signed-off-by: Woody Suwalski <terraluna977@gmail.com>
>>
>> diff --git a/drivers/gpu/drm/radeon/radeon_ring.c
>> b/drivers/gpu/drm/radeon/radeon_ring.c
>> index e6534fa9f1fb..72b1d2d31295 100644
>> --- a/drivers/gpu/drm/radeon/radeon_ring.c
>> +++ b/drivers/gpu/drm/radeon/radeon_ring.c
>> @@ -549,10 +549,15 @@ static void radeon_debugfs_ring_init(struct
>> radeon_device *rdev, struct radeon_r
>> #if defined(CONFIG_DEBUG_FS)
>> const char *ring_name = radeon_debugfs_ring_idx_to_name(ring->idx);
>> struct dentry *root = rdev->ddev->primary->debugfs_root;
>> -
>> - if (ring_name)
>> - debugfs_create_file(ring_name, 0444, root, ring,
>> - &radeon_debugfs_ring_info_fops);
>> + struct dentry *lookup;
>> +
>> + if (ring_name) {
>> + if ((lookup = debugfs_lookup(ring_name, root)) == NULL)
>> + debugfs_create_file(ring_name, 0444, root, ring,
>> + &radeon_debugfs_ring_info_fops);
>> + else
>> + dput(lookup);
>> + }
>>
>> #endif
>> }
>>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-12-11 10:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-11-23 4:25 [PATCH] drm/radeon: Prevent multiple error lines on suspend Woody Suwalski
2023-12-10 18:24 ` Woody Suwalski
2023-12-11 10:54 ` Christian König
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).